ZXR10-EFM-MIB

File: ZXR10-EFM-MIB.mib (26326 bytes)

Imported modules

SNMPv2-SMI RFC1213-MIB SNMPv2-TC
RFC-1215 ZXR10-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
enterprises ifIndex DisplayString
TEXTUAL-CONVENTION TruthValue TRAP-TYPE
zxr10

Defined Types

EFM-StateValue  
Ethernet OAM state switch.
TEXTUAL-CONVENTION    
  INTEGER enable(1), disable(2)  

Zxr10ethernetOamIfConfigEntry  
SEQUENCE    
  zxr10ethernetOamifName DisplayString
  zxr10ethernetOamIfEnable INTEGER
  zxr10ethernetOamRemoteLoopbackEnable INTEGER
  zxr10ethernetOamifmode Unsigned32
  zxr10ethernetOamiftimeout Unsigned32
  zxr10ethernetOamifLinkMonitorEnable INTEGER
  zxr10ethernetOamifLinkMonitorSymbolPeriodthreshold Unsigned32
  zxr10ethernetOamifLinkMonitorSymbolPeriodwindow Unsigned32
  zxr10ethernetOamifLinkMonitorFramethreshold Unsigned32
  zxr10ethernetOamifLinkMonitorFramewindow Unsigned32
  zxr10ethernetOamifLinkMonitorFramePeriodthreshold Unsigned32
  zxr10ethernetOamifLinkMonitorFramePeriodwindow Unsigned32
  zxr10ethernetOamifLinkMonitorFrameSecondsthreshold Unsigned32
  zxr10ethernetOamifLinkMonitorFrameSecondswindow Unsigned32
  zxr10ethernetOamifperiod Unsigned32
  zxr10ethernetOamiffastflag INTEGER
  zxr10ethernetOamifTimeoutFast Unsigned32
  zxr10ethernetOamifUnidirection INTEGER
  zxr10ethernetOamifRmtLbMode EFM-StateValue
  zxr10ethernetOamifRmtLbGuard TruthValue
  zxr10ethernetOamifVariRetrieval EFM-StateValue
  zxr10EFMSymPerSetIfDownEnable INTEGER
  zxr10EFMFrameSetIfDownEnable INTEGER
  zxr10EFMFramePerSetIfDownEnable INTEGER
  zxr10EFMFrameSecSetIfDownEnable INTEGER
  zxr10EFMSetIfUp INTEGER

Zxr10ethernetOamShowEntry  
SEQUENCE    
  zxr10ethernetOamShowDiscovery DisplayString
  zxr10ethernetOamShowLinkMonitor DisplayString
  zxr10ethernetOamShowStatistics DisplayString

Zxr10ethernetOamIfVariableEntry  
SEQUENCE    
  zxr10ethernetOamifVariLeafID INTEGER
  zxr10ethernetOamifVariRequest INTEGER
  zxr10ethernetOamifVariResponse DisplayString

Defined Values

zxr10ethernetOam 1.3.6.1.4.1.3902.3.902
The MIB module to describe the 802.3ah Ethernet OAM protocol.
MODULE-IDENTITY    

zxr10ethernetOamGlobalObjects 1.3.6.1.4.1.3902.3.902.1
OBJECT IDENTIFIER    

zxr10ethernetOamGlobalCfgObjects 1.3.6.1.4.1.3902.3.902.1.1
OBJECT IDENTIFIER    

zxr10ethernetOamGlobalEnable 1.3.6.1.4.1.3902.3.902.1.1.1
Configure Ethernet OAM enable(0-disable, 1-enable).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamOuiInformation 1.3.6.1.4.1.3902.3.902.1.1.2
Configure Ethernet OAM OUI information.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

zxr10ethernetOamRemoteLoopbackTimeout 1.3.6.1.4.1.3902.3.902.1.1.3
Configure Ethernet OAM remote loopback time-out.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

zxr10ethernetOamIfConfigTable 1.3.6.1.4.1.3902.3.902.2
Configure Ethernet OAM interface parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ethernetOamIfConfigEntry

zxr10ethernetOamIfConfigEntry 1.3.6.1.4.1.3902.3.902.2.1
Configure Ethernet OAM interface config parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ethernetOamIfConfigEntry  

zxr10ethernetOamifName 1.3.6.1.4.1.3902.3.902.2.1.1
Show interface name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10ethernetOamIfEnable 1.3.6.1.4.1.3902.3.902.2.1.2
Configure interface Ethernet OAM enable(0-disable, 1-enable).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamRemoteLoopbackEnable 1.3.6.1.4.1.3902.3.902.2.1.3
Configure Ethernet OAM remote loopback start/stop(0-stop, 1-start). As an interactive operation, zxr10ethernetOamRemoteLoopbackEnable will always be zero(0) because it can not reflect the value be set.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamifmode 1.3.6.1.4.1.3902.3.902.2.1.4
Configure Ethernet OAM mode(0-passive mode, 1-active mode).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..1  

zxr10ethernetOamiftimeout 1.3.6.1.4.1.3902.3.902.2.1.5
Configure Ethernet OAM link timeout value, in seconds, to indicate that during this time, if no OAMPDUs can be received, the link will be lost. It is available when zxr10ethernetOamiffastflag is 0.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..20  

zxr10ethernetOamifLinkMonitorEnable 1.3.6.1.4.1.3902.3.902.2.1.6
Configure Ethernet OAM link monitor enable(0-disable, 1-enable).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamifLinkMonitorSymbolPeriodthreshold 1.3.6.1.4.1.3902.3.902.2.1.7
Configure Ethernet OAM link monitor Symbol Period threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorSymbolPeriodthreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorSymbolPeriodwindow 1.3.6.1.4.1.3902.3.902.2.1.8
Configure Ethernet OAM link monitor Symbol Period window. Each project has different range, units and default value of zxr10ethernetOamifLinkMonitorSymbolPeriodwindow.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFramethreshold 1.3.6.1.4.1.3902.3.902.2.1.9
Configure Ethernet OAM link monitor Frame threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramethreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFramewindow 1.3.6.1.4.1.3902.3.902.2.1.10
Configure Ethernet OAM link monitor Frame window. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramewindow.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFramePeriodthreshold 1.3.6.1.4.1.3902.3.902.2.1.11
Configure Ethernet OAM link monitor Frame Period threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFramePeriodthreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFramePeriodwindow 1.3.6.1.4.1.3902.3.902.2.1.12
Configure Ethernet OAM link monitor Frame Period window. Each project has different range, units and default value of zxr10ethernetOamifLinkMonitorFramePeriodwindow.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFrameSecondsthreshold 1.3.6.1.4.1.3902.3.902.2.1.13
Configure Ethernet OAM link monitor Frame Seconds threshold. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFrameSecondsthreshold.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifLinkMonitorFrameSecondswindow 1.3.6.1.4.1.3902.3.902.2.1.14
Configure Ethernet OAM link monitor Frame Seconds window. Each project has different range and default value of zxr10ethernetOamifLinkMonitorFrameSecondswindow.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

zxr10ethernetOamifperiod 1.3.6.1.4.1.3902.3.902.2.1.15
Configure Ethernet OAM PDU period.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..10  

zxr10ethernetOamiffastflag 1.3.6.1.4.1.3902.3.902.2.1.16
Ethernet OAM timeout setting mode. The link operates on slow mode and at this mode, hello OAMPDUs transmit in 1 pps rate when zxr10ethernetOamiffastflag is 0. The link operates on fast mode and at this mode, hello OAMPDUs transmit one packet per zxr10ethernetOamifperiod*100 milliseconds when zxr10ethernetOamiffastflag is 1. If zxr10ethernetOamiffastflag is 1, zxr10ethernetOamifTimeoutFast is available other than zxr10ethernetOamiftimeout.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamifTimeoutFast 1.3.6.1.4.1.3902.3.902.2.1.17
Configure Ethernet OAM link timeout value, in milliseconds, to indicate that juring this time, if no OAMPDUs can be received, the link will be lost. It is available when zxr10ethernetOamiffastflag is 1.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..200  

zxr10ethernetOamifUnidirection 1.3.6.1.4.1.3902.3.902.2.1.18
Configure Ethernet OAM unidirection function enable.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10ethernetOamifRmtLbMode 1.3.6.1.4.1.3902.3.902.2.1.19
Configure Ethernet OAM capability of responding to remote loopback request.
Status: current Access: read-write
OBJECT-TYPE    
  EFM-StateValue  

zxr10ethernetOamifRmtLbGuard 1.3.6.1.4.1.3902.3.902.2.1.20
Configure Ethernet OAM guard mode of disabling remote loopback mode from attack. True means recovering local slave state from LB to FWD forcefully.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

zxr10ethernetOamifVariRetrieval 1.3.6.1.4.1.3902.3.902.2.1.21
Configure Ethernet OAM capability of responding to variable request.
Status: current Access: read-write
OBJECT-TYPE    
  EFM-StateValue  

zxr10EFMSymPerSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.22
Configure the function enable(0-disable, 1-enable) that the event of link monitor Symbol Period notify the interface down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10EFMFrameSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.23
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame notify the interface down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10EFMFramePerSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.24
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame period notify the interface down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10EFMFrameSecSetIfDownEnable 1.3.6.1.4.1.3902.3.902.2.1.25
Configure the function enable(0-disable, 1-enable) that the event of link monitor frame seconds notify the interface down.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..1  

zxr10EFMSetIfUp 1.3.6.1.4.1.3902.3.902.2.1.26
Set the interface status to up because the event of LM notify the interface to down. As an operation, zxr10EFMSetIfUp will always be got one(1) and be set one(1).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1  

zxr10ethernetOamShowTable 1.3.6.1.4.1.3902.3.902.3
Show Ethernet OAM config parameters and state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ethernetOamShowEntry

zxr10ethernetOamShowEntry 1.3.6.1.4.1.3902.3.902.3.1
Show Ethernet OAM interface config parameters and state.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ethernetOamShowEntry  

zxr10ethernetOamShowDiscovery 1.3.6.1.4.1.3902.3.902.3.1.1
Show Ethernet OAM discovery parameters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10ethernetOamShowLinkMonitor 1.3.6.1.4.1.3902.3.902.3.1.2
Show Ethernet OAM link monitor parameters.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10ethernetOamShowStatistics 1.3.6.1.4.1.3902.3.902.3.1.3
Show Ethernet OAM PDU statistics.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

zxr10ethernetOamIfVariableTable 1.3.6.1.4.1.3902.3.902.4
Configure Ethernet OAM interface variable retrieval operation and parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Zxr10ethernetOamIfVariableEntry

zxr10ethernetOamIfVariableEntry 1.3.6.1.4.1.3902.3.902.4.1
Configure Ethernet OAM interface variable retrieval operation and parameters.
Status: current Access: not-accessible
OBJECT-TYPE    
  Zxr10ethernetOamIfVariableEntry  

zxr10ethernetOamifVariLeafID 1.3.6.1.4.1.3902.3.902.4.1.1
The value of variable leaf id. Supported variable leaf id as follows: value description 236 OAMID 237 OAMAdminState 238 OAMMode 239 OAMRemoteMACaddress 240 OAMRemoteConfiguration 241 OAMRemotePDUConfiguration 242 OAMLocalFlagsField 243 OAMRemoteFlagsField 244 OAMRemoteRevision 245 OAMRemoteState 246 OAMRemoteVendorOUI 247 OAMRemoteVendorSpecificinfo 250 OAMUnsupportedCodesRX 251 OAMInformationTX 252 OAMInformationRX 254 OAMUniqueEventNotificationRX 255 OAMDuplicateEventNotificationRX 256 OAMLoopbackControlTX 257 OAMLoopbackControlRX 258 OAMVariableRequestTX 259 OAMVariableRequestRX 260 OAMVariableResponseTX 261 OAMVariableResponseRX 262 OAMOrganizationSpecificTX 263 OAMOrganizationSpecificRX 264 OAMLocalErrSymPeriodConfig 265 OAMLocalErrSymPeriodEvent 266 OAMLocalErrFrameConfig 267 OAMLocalErrFrameEvent 268 OAMLocalErrFramePeriodConfig 269 OAMLocalErrFramePeriodEvent 270 OAMLocalErrFrameSecsSummaryConfig 271 OAMLocalErrFrameSecsSummaryEvent 272 OAMRemoteErrSymPEriodEvent 273 OAMRemoteErrFrameEvent 274 OAMRemoteErrFramePeriodEvent 275 OAMRemoteErrFrameSecsSummaryEvent 333 OAMDiscoveryState 334 OAMLocalConfiguration 335 OAMLocalPDUConfiguration 336 OAMLocalRevision 337 OAMLocalState 338 OAMUnsupportedCodesTX 339 OAMUniqueEventNotificationTX 340 OAMDuplicateEventNotificationTX
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..65535  

zxr10ethernetOamifVariRequest 1.3.6.1.4.1.3902.3.902.4.1.2
Configure interface Ethernet OAM variable request operation. The operation can request MIB attributes, objects and packages, while only MIB attributes can be requested by the device. It can only be set 1 which means request operation, when get 0 only for it's unmeaningful.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0 | 1  

zxr10ethernetOamifVariResponse 1.3.6.1.4.1.3902.3.902.4.1.3
Show interface Ethernet OAM variable response value, as value of set zxr10ethernetOamifVariRequest.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor