ZTE-AN-OTDR-MIB

File: ZTE-AN-OTDR-MIB.mib (166603 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	IF-MIB
INET-ADDRESS-MIB	ZTE-AN-OFD-SMI

Imported symbols

MODULE-IDENTITY	NOTIFICATION-TYPE	OBJECT-TYPE
Integer32	DisplayString	DateAndTime
RowStatus	ifIndex	InetAddressType
InetAddress	zxAnOfd

Defined Types

ZxAnOtdrTestParamPrfEntry
SEQUENCE
	zxAnOtdrTestParamPrfName	DisplayString
	zxAnOtdrTestParamPrfMode	INTEGER
	zxAnOtdrTestParamPrfWaveLength	Integer32
	zxAnOtdrTestParamPrfDistance	Integer32
	zxAnOtdrTestParamPrfFiberIor	Integer32
	zxAnOtdrTestParamPrfPulseWidth	Integer32
	zxAnOtdrTestParamPrfDuration	Integer32
	zxAnOtdrTestParamPrfSeqCodeLen	Integer32
	zxAnOtdrTestParamPrfSeqCodeWidth	Integer32
	zxAnOtdrTestParamPrfRowStatus	RowStatus

ZxAnOtdrIfEntry
SEQUENCE
	zxAnOtdrIfAlias	DisplayString
	zxAnOtdrIfFastTestParamPrf	DisplayString
	zxAnOtdrIfRoutineTestParamPrf	DisplayString
	zxAnOtdrIfHealthTestParamPrf	DisplayString
	zxAnOtdrIfReflectorTestParamPrf	DisplayString
	zxAnOtdrIfNetworkPropertyPrf	DisplayString
	zxAnOtdrIfAcceptanceTestPrf	DisplayString
	zxAnOtdrIfNetworkProperty	INTEGER
	zxAnOtdrIfWorkingStatus	INTEGER
	zxAnOtdrIfUsageStatus	INTEGER
	zxAnOtdrIfUsageStatusSwitch	INTEGER
	zxAnOtdrIfWorkMode	INTEGER
	zxAnOtdrIfBothwayTestPrf	DisplayString

ZxAnOtdrNetPropPrfEntry
SEQUENCE
	zxAnOtdrNetPrfName	DisplayString
	zxAnOtdrNetPrfLinkType	INTEGER
	zxAnOtdrNetPrfFirstSplitRatio	INTEGER
	zxAnOtdrNetPrfSecondSplitRatio	INTEGER
	zxAnOtdrNetPrfThirdSplitRatio	INTEGER
	zxAnOtdrNetPrfLinkLength	Integer32
	zxAnOtdrNetPrfRowStatus	RowStatus

ZxAnOtdrFastTestIfEntry
SEQUENCE
	zxAnOtdrFastTestIfSn	DisplayString
	zxAnOtdrAcceptanceTestIfParamPrf	DisplayString
	zxAnOtdrFastTestIfRowStatus	RowStatus

ZxAnOtdrFastTestIfStatusEntry
SEQUENCE
	zxAnOtdrFastTestIfStatus	INTEGER
	zxAnOtdrFastTestIfFailedReason	INTEGER
	zxAnOtdrFastTestIfResultFile	DisplayString
	zxAnOtdrFastTestIfParamPrfs	Integer32
	zxAnOtdrFastTestIfFinishedPrfs	Integer32
	zxAnOtdrFastTestIfEvalTotalTime	Integer32
	zxAnOtdrFastTestIfElapsedTime	Integer32

ZxAnOtdrFileFtpUploadStatusEntry
SEQUENCE
	zxAnOtdrFileFtpUploadFileName	DisplayString
	zxAnOtdrFileFtpUploadStatus	INTEGER
	zxAnOtdrFileFtpUploadFailReason	INTEGER

ZxAnOtdrRoutineTaskIfEntry
SEQUENCE
	zxAnOtdrRoutineTaskIfRowStatus	RowStatus

ZxAnOtdrRoutineTaskEntry
SEQUENCE
	zxAnOtdrRoutineTaskName	DisplayString
	zxAnOtdrRoutineTaskStartTime	DateAndTime
	zxAnOtdrRoutineTaskInterval	Integer32
	zxAnOtdrRoutineTaskActiveStatus	INTEGER
	zxAnOtdrRoutineTaskCurrStartTime	DateAndTime
	zxAnOtdrRoutineTaskOperStatus	INTEGER
	zxAnOtdrRoutineTaskFailedReason	INTEGER
	zxAnOtdrRoutineTaskResultFile	DisplayString
	zxAnOtdrRoutineTaskTestMode	INTEGER
	zxAnOtdrRoutineTaskRowStatus	RowStatus

ZxAnOtdrRoutineTaskIfStatusEntry
SEQUENCE
	zxAnOtdrRoutineTaskIfStatus	INTEGER
	zxAnOtdrRoutineTaskIfFailReason	INTEGER

ZxAnOtdrFtpServerEntry
SEQUENCE
	zxAnOtdrFtpServerId	DisplayString
	zxAnOtdrFtpServerIpAddressType	InetAddressType
	zxAnOtdrFtpServerIpAddress	InetAddress
	zxAnOtdrFtpServerProtocolType	INTEGER
	zxAnOtdrFtpServerUserName	DisplayString
	zxAnOtdrFtpServerUserPwd	DisplayString
	zxAnOtdrFtpServerPath	DisplayString
	zxAnOtdrFtpServerRowStatus	RowStatus

ZxAnOtdrAlgorithmEntry
SEQUENCE
	zxAnOtdrAlgorithmRack	Integer32
	zxAnOtdrAlgorithmShelf	Integer32
	zxAnOtdrAlgorithmSlot	Integer32
	zxAnOtdrAlgorithmVersion	DisplayString

ZxAnOtdrTestCapPwDistanceEntry
SEQUENCE
	zxAnOtdrTestCapPwDistancePw	Integer32
	zxAnOtdrTestCapPwMaxDistance	Integer32
	zxAnOtdrTestCapPwMinDistance	Integer32

ZxAnOtdrTestCapCwDistanceEntry
SEQUENCE
	zxAnOtdrTestCapCwDistanceCw	Integer32
	zxAnOtdrTestCapCwMaxDistance	Integer32
	zxAnOtdrTestCapCwMinDistance	Integer32

ZxAnOtdrTestTaskStatusEntry
SEQUENCE
	zxAnOtdrTestTaskId	DisplayString
	zxAnOtdrTestTaskStatus	INTEGER
	zxAnOtdrTestTaskUnexecutedReason	INTEGER
	zxAnOtdrTestTaskPriority	Integer32
	zxAnOtdrTestTaskWaitingTime	Integer32
	zxAnOtdrTestTaskRequestSource	INTEGER
	zxAnOtdrTestTaskType	INTEGER
	zxAnOtdrTestTaskStartTime	DateAndTime
	zxAnOtdrTestTaskRemainTimeout	Integer32

ZxAnOtdrFastTestTaskConfEntry
SEQUENCE
	zxAnOtdrFastTaskConfWaitTimeout	Integer32
	zxAnOtdrFastTaskConfRowStatus	RowStatus

ZxAnOtdrMonNodeConfEntry
SEQUENCE
	zxAnOtdrMonNodeSn	DisplayString
	zxAnOtdrMonNodePosition	Integer32
	zxAnOtdrMonNodeStatus	INTEGER
	zxAnOtdrNodeConfRowStatus	RowStatus

ZxAnOtdrMonPortStatusEntry
SEQUENCE
	zxAnOtdrMonPortLinkStatus	INTEGER

ZxAnOtdrMonReflectLabelEntry
SEQUENCE
	zxAnOtdrMonReflectLabelAction	INTEGER
	zxAnOtdrMonReflectLabelStatus	INTEGER
	zxAnOtdrMonReflectLabelLastTime	DateAndTime

ZxAnOtdrOptModuleIfEntry
SEQUENCE
	zxAnOtdrOptModuleIfBasicPwr	Integer32
	zxAnOtdrOptModuleIfCurrentPwr	Integer32
	zxAnOtdrOptModuleIfPwrVaryThresh	Integer32
	zxAnOtdrOptModuleIfPwrAdjust	INTEGER

ZxAnOtdrP2mpFaultLocatePrfEntry
SEQUENCE
	zxAnOtdrP2mpFaultLocatePrfName	DisplayString
	zxAnOtdrP2mpPositionDiff	Integer32
	zxAnOtdrP2mpTrunkBrokenLossDiff	Integer32
	zxAnOtdrP2mpTrunkBrokenLoss	Integer32
	zxAnOtdrP2mpTrunkAttenLossDiff	Integer32
	zxAnOtdrP2mpTrunkAttenLoss	Integer32
	zxAnOtdrP2mpTrunkAbnPeakDiff	Integer32
	zxAnOtdrP2mpTrunkAbnRtnLoss	Integer32
	zxAnOtdrP2mpTrunkAbnLoss	Integer32
	zxAnOtdrP2mpBranchBrokenRtnLoss	Integer32
	zxAnOtdrP2mpBranchBrokenLoss	Integer32
	zxAnOtdrP2mpBranchBrokenPeakDiff	Integer32
	zxAnOtdrP2mpBranchAbnPeakDiff	Integer32
	zxAnOtdrP2mpFaultLocPrfRowStatus	RowStatus

ZxAnOtdrP2pFaultLocatePrfEntry
SEQUENCE
	zxAnOtdrP2pFaultLocatePrfName	DisplayString
	zxAnOtdrP2pPositionDiff	Integer32
	zxAnOtdrP2pBrokenLossDiff	Integer32
	zxAnOtdrP2pBrokenLoss	Integer32
	zxAnOtdrP2pAttenuationLossDiff	Integer32
	zxAnOtdrP2pAttenuationLoss	Integer32
	zxAnOtdrP2pAbnormalPeakDiff	Integer32
	zxAnOtdrP2pAbnormalReturnLoss	Integer32
	zxAnOtdrP2pAbnormalLoss	Integer32
	zxAnOtdrP2pFaultLocPrfRowStatus	RowStatus

ZxAnOtdrFaultLocateIfConfEntry
SEQUENCE
	zxAnOtdrFaultLocateIfP2mpPrf	DisplayString
	zxAnOtdrFaultLocateIfP2pPrf	DisplayString
	zxAnOtdrFaultLocateIfRowStatus	RowStatus

ZxAnOtdrIfEventBatchConfEntry
SEQUENCE
	zxAnOtdrIfEventBatchConfDevTypes	DisplayString

ZxAnOtdrIfEventConfEntry
SEQUENCE
	zxAnOtdrIfEventConfEventId	Integer32
	zxAnOtdrIfEventConfDevType	Integer32
	zxAnOtdrIfEventConfDevDesc	DisplayString

ZxAnOtdrAdaptTestLinkIfConfEntry
SEQUENCE
	zxAnOtdrATLinkIfParamType	INTEGER
	zxAnOtdrATLinkIfLossThresh	Integer32
	zxAnOtdrATLinkIfRtnLossThresh	Integer32

ZxAnOtdrAdaptTestDevIfConfEntry
SEQUENCE
	zxAnOtdrATDevIfParamType	INTEGER
	zxAnOtdrATDevIfFiberAttenThresh	Integer32
	zxAnOtdrATDevIfLossThresh	Integer32
	zxAnOtdrATDevIfReflThresh	Integer32
	zxAnOtdrATDevIfConnLossThresh	Integer32
	zxAnOtdrATDevIfConnReflThresh	Integer32
	zxAnOtdrATDevIfSpliceLossThresh	Integer32
	zxAnOtdrATDevIfSpReflThresh	Integer32
	zxAnOtdrATDevIfSp2LossThresh	Integer32
	zxAnOtdrATDevIfSp4LossThresh	Integer32
	zxAnOtdrATDevIfSp8LossThresh	Integer32
	zxAnOtdrATDevIfSp16LossThresh	Integer32
	zxAnOtdrATDevIfSp32LossThresh	Integer32
	zxAnOtdrATDevIfSp64LossThresh	Integer32
	zxAnOtdrATDevIfSp128LossThresh	Integer32
	zxAnOtdrATDevIfOnuReflThresh	Integer32

ZxAnOtdrDetectionLineConfEntry
SEQUENCE
	zxAnOtdrDetectLineId	Integer32
	zxAnOtdrDetectLineLength	Integer32
	zxAnOtdrDetectLineAlias	DisplayString
	zxAnOtdrDetectLinePositionDiff	Integer32
	zxAnOtdrDetectLineAbnPeakDiff	Integer32
	zxAnOtdrDetectLineStatus	INTEGER

Defined Values

zxAnOtdrMib		1.3.6.1.4.1.3902.1083.5
The MIB module for the management of OTDR equipment.
MODULE-IDENTITY

zxAnOtdrGlobalObjects		1.3.6.1.4.1.3902.1083.5.1
OBJECT IDENTIFIER

zxAnOtdrObjects		1.3.6.1.4.1.3902.1083.5.2
OBJECT IDENTIFIER

zxAnOtdrNotifications		1.3.6.1.4.1.3902.1083.5.3
OBJECT IDENTIFIER

zxAnOtdrIfObjects		1.3.6.1.4.1.3902.1083.5.2.1
OBJECT IDENTIFIER

zxAnOtdrFastTestObjects		1.3.6.1.4.1.3902.1083.5.2.2
OBJECT IDENTIFIER

zxAnOtdrRoutineTestObjects		1.3.6.1.4.1.3902.1083.5.2.3
OBJECT IDENTIFIER

zxAnOtdrFtpServerObjects		1.3.6.1.4.1.3902.1083.5.2.4
OBJECT IDENTIFIER

zxAnOtdrAlgorithmObjects		1.3.6.1.4.1.3902.1083.5.2.5
OBJECT IDENTIFIER

zxAnOtdrTestCapacityObjects		1.3.6.1.4.1.3902.1083.5.2.6
OBJECT IDENTIFIER

zxAnOtdrTestCapDistanceObjects		1.3.6.1.4.1.3902.1083.5.2.6.1
OBJECT IDENTIFIER

zxAnOtdrTestCapDistanceGlbObjs		1.3.6.1.4.1.3902.1083.5.2.6.1.1
OBJECT IDENTIFIER

zxAnOtdrTestCapDurationObjects		1.3.6.1.4.1.3902.1083.5.2.6.2
OBJECT IDENTIFIER

zxAnOtdrTestCapDurationGlbObjs		1.3.6.1.4.1.3902.1083.5.2.6.2.1
OBJECT IDENTIFIER

zxAnOtdrTestTaskObjects		1.3.6.1.4.1.3902.1083.5.2.7
OBJECT IDENTIFIER

zxAnOtdrMonNodeObjects		1.3.6.1.4.1.3902.1083.5.2.8
OBJECT IDENTIFIER

zxAnOtdrOptModuleMonitorObjects		1.3.6.1.4.1.3902.1083.5.2.9
OBJECT IDENTIFIER

zxAnOtdrFaultLocateObjects		1.3.6.1.4.1.3902.1083.5.2.10
OBJECT IDENTIFIER

zxAnOtdrEventObjects		1.3.6.1.4.1.3902.1083.5.2.11
OBJECT IDENTIFIER

zxAnOtdrAdaptiveTestObjects		1.3.6.1.4.1.3902.1083.5.2.12
OBJECT IDENTIFIER

zxAnOtdrDetectionLineObjects		1.3.6.1.4.1.3902.1083.5.2.13
OBJECT IDENTIFIER

zxAnOtdrEnvTraps		1.3.6.1.4.1.3902.1083.5.3.50
OBJECT IDENTIFIER

zxAnOtdrMonNodeTraps		1.3.6.1.4.1.3902.1083.5.3.51
OBJECT IDENTIFIER

zxAnOtdrOptModuleMonitorTraps		1.3.6.1.4.1.3902.1083.5.3.52
OBJECT IDENTIFIER

zxAnOtdrDetectionLineTraps		1.3.6.1.4.1.3902.1083.5.3.53
OBJECT IDENTIFIER

zxAnOtdrCapacityGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.1
OBJECT IDENTIFIER

zxAnOtdrWaveLengthList		1.3.6.1.4.1.3902.1083.5.1.1.1
The wave length supported by OTDR. The value divided by '|'. The unit of wave length is nm. PON OLTs support 1625. eOMUs support 1550|1625.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

zxAnOtdrTestPulseWidthList		1.3.6.1.4.1.3902.1083.5.1.1.2
The pulse width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. The value 200001 means 2.5ns. e.g., 5|10|30|100|200|500|10000|20000|200001.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

zxAnOtdrTotalPorts		1.3.6.1.4.1.3902.1083.5.1.1.3
The total port number of OTDR.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

zxAnOtdrTestSeqCodeLenList		1.3.6.1.4.1.3902.1083.5.1.1.4
The sequence code length supported by OTDR. The value divided by '|'. PON OLTs support 512|1024|2048|4096. eOMUs support 64|256|512|1024.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

zxAnOtdrTestSeqCodeWidthList		1.3.6.1.4.1.3902.1083.5.1.1.5
The sequence code width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. PON OLTs support 5|10|20|30|50. eOMUs support 5|10|20|30.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..255)

zxAnOtdrDualWavelengthTestMode		1.3.6.1.4.1.3902.1083.5.1.1.6
The test mode of dual wavelength. cascade(1): dual wavelength testing on two NEs by cascade. nonCascade(2): dual wavelength testing on one NE.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	cascade(1), nonCascade(2)

zxAnOtdrCapabilities		1.3.6.1.4.1.3902.1083.5.1.1.51
The OTDR capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. - fastHealthPrfDiff(0): value 1 means supporting zxAnOtdrIfHealthTestParamPrf and zxAnOtdrTestType. - seqCodeLen(1): value 1 means supporting zxAnOtdrTestParamPrfSeqCodeLen. - routineTaskTestMode(2): value 1 means supporting zxAnOtdrRoutineTaskTestMode. - priorityTaskTest(3): value 1 means supporting zxAnOtdrFastTestPriority and zxAnOtdrFastTestRequestSource. - reflectorTest(4): value 1 means supporting zxAnOtdrIfReflectorTestParamPrf and zxAnOtdrTestType. - globalTestParamPrf(5): value 1 means supporting global test parameter profile. - opticalFiberLabefaction(6): value 1 means supporting optical fiber labefaction predication. - bothwayTest(7): value 1 means supporting zxAnOtdrIfBothwayTestParamPrf and zxAnOtdrTestType. - controlCardIndependentTest(8): value 1 means supporting the control card test without line card.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	fastHealthPrfDiff(0), seqCodeLen(1), routineTaskTestMode(2), priorityTaskTest(3), reflectorTest(4), globalTestParamPrf(5), opticalFiberLabefaction(6), bothwayTest(7), controlCardIndependentTest(8)

zxAnOtdrEnvGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.2
OBJECT IDENTIFIER

zxAnOtdrEnvCtrlCardGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.2.1
OBJECT IDENTIFIER

zxAnOtdrCtrlCardCurrentTemp		1.3.6.1.4.1.3902.1083.5.1.2.1.1
The current control card temperature of OTDR equipment.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrCtrlCardTempHighThresh		1.3.6.1.4.1.3902.1083.5.1.2.1.2
The high threshold of the control card temperature, the zxAnOtdrEnvCtrlCardHighTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvCtrlCardHighTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	75..95

zxAnOtdrCtrlCardTempLowThresh		1.3.6.1.4.1.3902.1083.5.1.2.1.3
The low threshold of the control card temperature, the zxAnOtdrEnvCtrlCardLowTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvCtrlCardLowTempClr trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than it.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-45..-25

zxAnOtdrEnvFanGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.2.2
OBJECT IDENTIFIER

zxAnOtdrEnvFanStatus		1.3.6.1.4.1.3902.1083.5.1.2.2.1
The fan status. When zxAnOtdrEnvFanStatus is abnormal, zxAnOtdrEnvFanFailureAlm trap should be sent to manager. If zxAnOtdrEnvFanStatus is normal, zxAnOtdrEnvFanFailureClr trap should be sent.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), abnormal(2)

zxAnOtdrEnvFanOperStatus		1.3.6.1.4.1.3902.1083.5.1.2.2.2
The operational status of fan.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	up(1), down(2)

zxAnOtdrEnvApdGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.2.3
OBJECT IDENTIFIER

zxAnOtdrEnvApdCurrentTemp		1.3.6.1.4.1.3902.1083.5.1.2.3.1
The current temperature of APD.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrEnvApdTempHighThresh		1.3.6.1.4.1.3902.1083.5.1.2.3.2
The high threshold of the APD temperature, the zxAnOtdrEnvApdHighTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is higher than it. Otherwise, zxAnOtdrEnvApdHighTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	60..100

zxAnOtdrEnvApdTempLowThresh		1.3.6.1.4.1.3902.1083.5.1.2.3.3
The low threshold of the APD temperature, the zxAnOtdrEnvApdLowTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it. Otherwise, zxAnOtdrEnvApdLowTempClr trap should be generated when zxAnOtdrEnvApdCurrentTemp higher than it.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-55..-20

zxAnOtdrPortUtilGlobalObjects		1.3.6.1.4.1.3902.1083.5.1.3
OBJECT IDENTIFIER

zxAnOtdrPortUtilization		1.3.6.1.4.1.3902.1083.5.1.3.1
The current port utilization of OTDR equipment.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..100

zxAnOtdrPortUtilizationThresh		1.3.6.1.4.1.3902.1083.5.1.3.2
The threshold of zxAnOtdrPortUtilization. When zxAnOtdrPortUtilization exceeds this threshold, the zxAnOtdrPortUtlExceedAlm trap should be generated.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

zxAnOtdrIfGlobalObjects		1.3.6.1.4.1.3902.1083.5.2.1.1
OBJECT IDENTIFIER

zxAnOtdrGlobalTestParamPrf		1.3.6.1.4.1.3902.1083.5.2.1.1.1
The OTDR global test parameter profile name list. The global profile is applied to the interface when the interface test parameter profile is unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..256)

zxAnOtdrGlobalNetworkPropertyPrf		1.3.6.1.4.1.3902.1083.5.2.1.1.2
The OTDR global network property profile name list. The global profile is applied to the interface when the interface network property profile is unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..256)

zxAnOtdrGlobalAcceptanceTestPrf		1.3.6.1.4.1.3902.1083.5.2.1.1.3
The OTDR acceptance test parameter profile name list, such as 'DEFAULT_ACCEPTANCE_1,DEFAULT_ACCEPTANCE_2,DEFAULT_ACCEPTANCE_3', which are in order of decreasing priority. The global profile is applied to the interface when zxAnOtdrIfAcceptanceTestPrf is unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..256)

zxAnOtdrTestParamPrfTable		1.3.6.1.4.1.3902.1083.5.2.1.2
This table includes OTDR test parameter Profile information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrTestParamPrfEntry

zxAnOtdrTestParamPrfEntry		1.3.6.1.4.1.3902.1083.5.2.1.2.1
OTDR test parameter profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrTestParamPrfEntry

zxAnOtdrTestParamPrfName		1.3.6.1.4.1.3902.1083.5.2.1.2.1.1
OTDR test parameter profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrTestParamPrfMode		1.3.6.1.4.1.3902.1083.5.2.1.2.1.2
OTDR test mode. When the mode is pulseMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfPulseWidth, zxAnOtdrTestParamPrfDuration are valid. When the mode is sequenceMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfDuration, zxAnOtdrTestParamPrfSeqCodeLen, zxAnOtdrTestParamPrfSeqCodeWidth are valid.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	pulseMethod(1), sequenceMethod(2)

zxAnOtdrTestParamPrfWaveLength		1.3.6.1.4.1.3902.1083.5.2.1.2.1.3
OTDR test wave length.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1625..1650

zxAnOtdrTestParamPrfDistance		1.3.6.1.4.1.3902.1083.5.2.1.2.1.4
OTDR test distance.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestParamPrfFiberIor		1.3.6.1.4.1.3902.1083.5.2.1.2.1.5
OTDR test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6).
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	1400000..1600000

zxAnOtdrTestParamPrfPulseWidth		1.3.6.1.4.1.3902.1083.5.2.1.2.1.6
OTDR test pulse width. '0' means not configured. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., The value 5 is mapped to 5ns, the value 200001 is mapped to 2.5ns.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	5..200000 | 200001..300000 | 0

zxAnOtdrTestParamPrfDuration		1.3.6.1.4.1.3902.1083.5.2.1.2.1.7
OTDR test duration. '0' means not configured
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 | 1..3600

zxAnOtdrTestParamPrfSeqCodeLen		1.3.6.1.4.1.3902.1083.5.2.1.2.1.8
OTDR test sequence code length. The valid value is the power of two, For example:16,32,64. '0' means not configured.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 | 16..16384

zxAnOtdrTestParamPrfSeqCodeWidth		1.3.6.1.4.1.3902.1083.5.2.1.2.1.9
OTDR test sequence code width. '0' means not configured.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 | 5..1275

zxAnOtdrTestParamPrfRowStatus		1.3.6.1.4.1.3902.1083.5.2.1.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrIfTable		1.3.6.1.4.1.3902.1083.5.2.1.3
This table includes OTDR test interface information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrIfEntry

zxAnOtdrIfEntry		1.3.6.1.4.1.3902.1083.5.2.1.3.1
OTDR interface entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrIfEntry

zxAnOtdrIfAlias		1.3.6.1.4.1.3902.1083.5.2.1.3.1.5
OTDR interface alias.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnOtdrIfFastTestParamPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.6
OTDR fast test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfRoutineTestParamPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.7
OTDR routine test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfHealthTestParamPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.8
OTDR health test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfReflectorTestParamPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.9
OTDR reflector test parameter profile name list, such as 'DEFAULT_REFLECTOR'.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfNetworkPropertyPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.10
OTDR interface network property profile name list. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfAcceptanceTestPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.11
OTDR acceptance test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE,DEFAULT_ACCEPTANCE', which are in order of decreasing priority. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfNetworkProperty		1.3.6.1.4.1.3902.1083.5.2.1.3.1.17
The network property of OTDR interface. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	p2mp(1), p2p(2)

zxAnOtdrIfWorkingStatus		1.3.6.1.4.1.3902.1083.5.2.1.3.1.18
The working status of OTDR interface.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	testing(1), idle(2)

zxAnOtdrIfUsageStatus		1.3.6.1.4.1.3902.1083.5.2.1.3.1.19
The usage status of OTDR interface. used(1): Health test has been run successfully. unused(2): No test parameter profile is bound to the port and the health test never runs. preconfigured(3): Test parameter profile is bound to the port. reserved(4): The port is reserved by administrator. Test parameter profile cannot be bound to a reserved port and the health test cannot run on it.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	used(1), unused(2), preconfigured(3), reserved(4)

zxAnOtdrIfUsageStatusSwitch		1.3.6.1.4.1.3902.1083.5.2.1.3.1.20
The usage status switch of OTDR interface. An unused status can be switched to reserved, and reserved status can be switched to unused. When get this variable, always return 1.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	switchToUnused(1), switchToReserved(2)

zxAnOtdrIfWorkMode		1.3.6.1.4.1.3902.1083.5.2.1.3.1.21
The working mode of OTDR interface. When the mode is faultLocating, the interface can be used for fault locating. When the mode is nodeMonitoring, the interface can be used for node monitoring. When the mode is opticalPowerMonitoring,the interface can be used for optical power monitoring. When the mode is lineDetection, the interface can be used for line detection. When the mode is bothwayTest, the interface can be used for bothway test. Bothway test uses two NEs linked by one fiber. When the mode is unusable, the interface can not be use.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	faultLocating(1), nodeMonitoring(2), opticalPowerMonitoring(3), lineDetection(4), bothwayTest(5), unusable(255)

zxAnOtdrIfBothwayTestPrf		1.3.6.1.4.1.3902.1083.5.2.1.3.1.22
OTDR bothway test parameter profile name list, such as 'DEFAULT_P2P'. Empty string means unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrNetPropPrfTable		1.3.6.1.4.1.3902.1083.5.2.1.4
OTDR network property profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrNetPropPrfEntry

zxAnOtdrNetPropPrfEntry		1.3.6.1.4.1.3902.1083.5.2.1.4.1
OTDR network property profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrNetPropPrfEntry

zxAnOtdrNetPrfName		1.3.6.1.4.1.3902.1083.5.2.1.4.1.1
OTDR network property profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrNetPrfLinkType		1.3.6.1.4.1.3902.1083.5.2.1.4.1.2
OTDR link type. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	p2mp(1), p2p(2)

zxAnOtdrNetPrfFirstSplitRatio		1.3.6.1.4.1.3902.1083.5.2.1.4.1.3
OTDR first-level splitting ratio. ratio1-x(20) : first-level splitting ratio is unknown. none(255) : first-level splitting does not exist.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ratio1-2(1), ratio1-4(2), ratio1-8(3), ratio1-16(4), ratio1-32(5), ratio1-64(6), ratio1-128(7), ratio1-x(20), none(255)

zxAnOtdrNetPrfSecondSplitRatio		1.3.6.1.4.1.3902.1083.5.2.1.4.1.4
OTDR second-level splitting ratio. ratio1-x(20) : second-level splitting ratio is unknown. none(255) : second-level splitting does not exist.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ratio1-2(1), ratio1-4(2), ratio1-8(3), ratio1-16(4), ratio1-32(5), ratio1-64(6), ratio1-128(7), ratio1-x(20), none(255)

zxAnOtdrNetPrfThirdSplitRatio		1.3.6.1.4.1.3902.1083.5.2.1.4.1.5
OTDR third-level splitting ratio. ratio1-x(20) : third-level splitting ratio is unknown. none(255) : third-level splitting does not exist.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ratio1-2(1), ratio1-4(2), ratio1-8(3), ratio1-16(4), ratio1-32(5), ratio1-64(6), ratio1-128(7), ratio1-x(20), none(255)

zxAnOtdrNetPrfLinkLength		1.3.6.1.4.1.3902.1083.5.2.1.4.1.6
OTDR link length. Value 0 means unconfigured.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..300000

zxAnOtdrNetPrfRowStatus		1.3.6.1.4.1.3902.1083.5.2.1.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrFastTestConfObjects		1.3.6.1.4.1.3902.1083.5.2.2.1
OBJECT IDENTIFIER

zxAnOtdrFastTestStatusObjects		1.3.6.1.4.1.3902.1083.5.2.2.2
OBJECT IDENTIFIER

zxAnOtdrFastTestFileFtpObjects		1.3.6.1.4.1.3902.1083.5.2.2.3
OBJECT IDENTIFIER

zxAnOtdrFastTestActionObjects		1.3.6.1.4.1.3902.1083.5.2.2.1.1
OBJECT IDENTIFIER

zxAnOtdrFastTestSn		1.3.6.1.4.1.3902.1083.5.2.2.1.1.1
OTDR fast test serial number.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..128)

zxAnOtdrFastTestAction		1.3.6.1.4.1.3902.1083.5.2.2.1.1.2
OTDR fast test action.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2), complete(3), lock(4), unlock(5)

zxAnOtdrFastTestMode		1.3.6.1.4.1.3902.1083.5.2.2.1.1.3
OTDR fast test mode. When the mode is pulseMethod, zxAnOtdrFastTestWaveLength, zxAnOtdrFastTestDistance, zxAnOtdrFastTestFiberIor, zxAnOtdrFastTestPulseWidth, zxAnOtdrFastTestDuration are valid. When the mode is sequenceMethod, zxAnOtdrFastTestWaveLength, zxAnOtdrFastTestDistance, zxAnOtdrFastTestFiberIor, zxAnOtdrFastTestDuration, zxAnOtdrFastTestSeqCodeLen, zxAnOtdrFastTestSeqCodeWidth are valid.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	pulseMethod(1), sequenceMethod(2)

zxAnOtdrFastTestWaveLength		1.3.6.1.4.1.3902.1083.5.2.2.1.1.4
OTDR fast test wave length.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1625..1650

zxAnOtdrFastTestDistance		1.3.6.1.4.1.3902.1083.5.2.2.1.1.5
OTDR fast test distance.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrFastTestFiberIor		1.3.6.1.4.1.3902.1083.5.2.2.1.1.6
OTDR fast test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1400000..1600000

zxAnOtdrFastTestPulseWidth		1.3.6.1.4.1.3902.1083.5.2.2.1.1.7
OTDR fast test pulse width. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., 5 is mapped to 5ns, 200001 is mapped to 2.5ns.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..200000 | 200001..300000

zxAnOtdrFastTestDuration		1.3.6.1.4.1.3902.1083.5.2.2.1.1.8
OTDR fast test duration.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..3600

zxAnOtdrFastTestSeqCodeLen		1.3.6.1.4.1.3902.1083.5.2.2.1.1.9
OTDR fast test sequence code length. The valid value is the power of two, For example:16,32,64.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	16..16384

zxAnOtdrFastTestSeqCodeWidth		1.3.6.1.4.1.3902.1083.5.2.2.1.1.10
OTDR fast test sequence code width.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	5..1275

zxAnOtdrTestType		1.3.6.1.4.1.3902.1083.5.2.2.1.1.11
OTDR test type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	fast(1), health(2), adHoc(3), reflector(4), alarmTrigger(5), adaptive(6), acceptance(7), labefaction(8), lineDetectionHealth(9), lineDetectionFast(10), bothway(11)

zxAnOtdrFastTestPriority		1.3.6.1.4.1.3902.1083.5.2.2.1.1.12
OTDR fast test priority.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..256

zxAnOtdrFastTestRequestSource		1.3.6.1.4.1.3902.1083.5.2.2.1.1.13
OTDR fast test request source.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ems(1), tl1(2), app(3)

zxAnOtdrFastTestRequestSrcIpType		1.3.6.1.4.1.3902.1083.5.2.2.1.1.14
IP address type of the OTDR fast test request source.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

zxAnOtdrFastTestRequestSrcIp		1.3.6.1.4.1.3902.1083.5.2.2.1.1.15
IP address of the OTDR fast test request source.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

zxAnOtdrMonNodeTestType		1.3.6.1.4.1.3902.1083.5.2.2.1.1.16
OTDR monitoring node test type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	openTest(1), closeTest(2)

zxAnOtdrFastTestIfTable		1.3.6.1.4.1.3902.1083.5.2.2.1.2
OTDR fast test interface table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFastTestIfEntry

zxAnOtdrFastTestIfEntry		1.3.6.1.4.1.3902.1083.5.2.2.1.2.1
OTDR fast test interface entry. The OTDR fast test consists of two steps, creating fast test ports(zxAnOtdrFastTestIfTable), and then starting fast test(zxAnOtdrFastTestSn, zxAnOtdrFastTestAction). NE restores to a previous state when the erroneous operations are performed. e.g. 1, When creating a port failed, NE needs to delete all the ports of this SN. e.g. 2, When creating ports succeeded, then starting test failed, NE needs to delete all the ports of this SN.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFastTestIfEntry

zxAnOtdrFastTestIfSn		1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.1
OTDR fast test serial number.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..128)

zxAnOtdrAcceptanceTestIfParamPrf		1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.2
OTDR acceptance test parameter profile name list chosen from zxAnOtdrIfAcceptanceTestPrf. e.g. 'DEFAULT-PULSE','DEFAULT-PULSE,DEFAULT-SEQUENCE', 'DEFAULT-PULSE,DEFAULT-SEQUENCE,DEFAULT-ACCEPTANCE'. If zxAnOtdrTestType is not acceptance(7), this should be empty.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrFastTestIfRowStatus		1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrFastTestStatusGlbObjects		1.3.6.1.4.1.3902.1083.5.2.2.2.1
OBJECT IDENTIFIER

zxAnOtdrFastTestCurrentPort		1.3.6.1.4.1.3902.1083.5.2.2.2.1.1
Current fast testing port index such as '1-1-3-2'. Return empty string means no port is being tested.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnOtdrFastTestWaitTestPorts		1.3.6.1.4.1.3902.1083.5.2.2.2.1.2
Current fast test waiting test port number. Return 0 measns no port waiting test.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..255

zxAnOtdrFastTestIfStatusTable		1.3.6.1.4.1.3902.1083.5.2.2.2.2
OTDR fast test port status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFastTestIfStatusEntry

zxAnOtdrFastTestIfStatusEntry		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1
OTDR fast test interface status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFastTestIfStatusEntry

zxAnOtdrFastTestIfStatus		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.1
The result status of OTDR fast test.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), inProgress(2), success(3), failed(4), stopped(5), waiting(6)

zxAnOtdrFastTestIfFailedReason		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.2
The OTDR fast test failed reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), getTestParamsFailed(2), communicationError(3), apdAlarm(4), noBindingProfile(5), opticalSwitchFailed(6), outOfMemory(7), chipTestFailed(8), algorithmError(9), saveFileFailed(10), testTimeout(11), fiberNotConnected(12), endToEndOpticalPowerLossLow(13), waitTimeout(14), preempted(15), otherErrors(255)

zxAnOtdrFastTestIfResultFile		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.3
Fast test result file name. NE returns file name such as '1-1-5-1-20120505143302.csv' when the fast test sucess. NE returns empty string when the fast test failed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnOtdrFastTestIfParamPrfs		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.4
Number of test parameter profile.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrFastTestIfFinishedPrfs		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.5
Number of finished test parameter profile.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrFastTestIfEvalTotalTime		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.6
OTDR test estimated total time.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrFastTestIfElapsedTime		1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.7
OTDR test elapsed time.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

zxAnOtdrFileFtpObjects		1.3.6.1.4.1.3902.1083.5.2.2.3.1
OBJECT IDENTIFIER

zxAnOtdrFileFtpIpAddressType		1.3.6.1.4.1.3902.1083.5.2.2.3.1.1
IP address type of the FTP server.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddressType

zxAnOtdrFileFtpIpAddress		1.3.6.1.4.1.3902.1083.5.2.2.3.1.2
IP address of the FTP server.
Status: current	Access: read-write
OBJECT-TYPE
	InetAddress

zxAnOtdrFileFtpProtocolType		1.3.6.1.4.1.3902.1083.5.2.2.3.1.3
Protocol type of the FTP server. ftp(1): File Transfer Protocol. sftp(2): Ssh File Transfer Protocol.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	ftp(1), sftp(2)

zxAnOtdrFileFtpUserName		1.3.6.1.4.1.3902.1083.5.2.2.3.1.4
User name of the FTP server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrFileFtpUserPwd		1.3.6.1.4.1.3902.1083.5.2.2.3.1.5
User password of the FTP server.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrFileFtpPath		1.3.6.1.4.1.3902.1083.5.2.2.3.1.6
File path which starts from the root directory.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..255)

zxAnOtdrFileFtpFileName		1.3.6.1.4.1.3902.1083.5.2.2.3.1.7
The FTP file name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..64)

zxAnOtdrFileFtpUploadStatusTable		1.3.6.1.4.1.3902.1083.5.2.2.3.2
OTDR file FTP status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFileFtpUploadStatusEntry

zxAnOtdrFileFtpUploadStatusEntry		1.3.6.1.4.1.3902.1083.5.2.2.3.2.1
File FTP status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFileFtpUploadStatusEntry

zxAnOtdrFileFtpUploadFileName		1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.1
OTDR test file name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..64)

zxAnOtdrFileFtpUploadStatus		1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.2
OTDR FTP status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), inProgress(2), success(3), failed(4)

zxAnOtdrFileFtpUploadFailReason		1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.3
OTDR FTP failed reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), fileNotExists(2), connectionFailed(3), otherErrors(255)

zxAnOtdrRoutineTaskIfTable		1.3.6.1.4.1.3902.1083.5.2.3.2
OTDR routine task interface table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrRoutineTaskIfEntry

zxAnOtdrRoutineTaskIfEntry		1.3.6.1.4.1.3902.1083.5.2.3.2.1
OTDR routine task interface entry. The OTDR routine test consists of two steps, creating routine test ports (zxAnOtdrRoutineTaskIfTable), and then configuring routine task (zxAnOtdrRoutineTaskTable). NE restores to a previous state when the erroneous operations are performed. e.g. 1, When creating a port failed, NE needs to delete all the ports of this task. e.g. 2, When creating ports succeeded, then configuring routine task failed, NE needs to delete all the ports of this task.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrRoutineTaskIfEntry

zxAnOtdrRoutineTaskIfRowStatus		1.3.6.1.4.1.3902.1083.5.2.3.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrRoutineTaskTable		1.3.6.1.4.1.3902.1083.5.2.3.3
Routine test task table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrRoutineTaskEntry

zxAnOtdrRoutineTaskEntry		1.3.6.1.4.1.3902.1083.5.2.3.3.1
Routine test task entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrRoutineTaskEntry

zxAnOtdrRoutineTaskName		1.3.6.1.4.1.3902.1083.5.2.3.3.1.1
OTDR routine test task name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..16)

zxAnOtdrRoutineTaskStartTime		1.3.6.1.4.1.3902.1083.5.2.3.3.1.2
The start time of OTDR routine test. For example:yyyy-mm-dd HH:MM:SS.(2013-01-01 00:00:00).
Status: current	Access: read-create
OBJECT-TYPE
	DateAndTime

zxAnOtdrRoutineTaskInterval		1.3.6.1.4.1.3902.1083.5.2.3.3.1.3
The interval of OTDR routine test. The NE returns 0, when zxAnOtdrRoutineTaskTestMode is sequential test.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0 | 1..525600

zxAnOtdrRoutineTaskActiveStatus		1.3.6.1.4.1.3902.1083.5.2.3.3.1.4
OTDR routine test task active status.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	activated(1), stopped(2)

zxAnOtdrRoutineTaskCurrStartTime		1.3.6.1.4.1.3902.1083.5.2.3.3.1.5
The current routine test task start time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zxAnOtdrRoutineTaskOperStatus		1.3.6.1.4.1.3902.1083.5.2.3.3.1.6
OTDR routine test task operational status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), inProgress(2), success(3), failed(4), suspended(5)

zxAnOtdrRoutineTaskFailedReason		1.3.6.1.4.1.3902.1083.5.2.3.3.1.7
The OTDR routine test task failed reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), getTestParamsFailed(2), communicationError(3), apdAlarm(4), allPortsTestFailed(5), packFileFailed(6), ftpFailed(7), ftpServiceUnconfigured(8), otherErrors(255)

zxAnOtdrRoutineTaskResultFile		1.3.6.1.4.1.3902.1083.5.2.3.3.1.8
Routine test result file name. NE returns file name such as 'taskname-20120505143302.zip' when the routine test sucess. NE returns empty string when the routine test failed.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

zxAnOtdrRoutineTaskTestMode		1.3.6.1.4.1.3902.1083.5.2.3.3.1.9
Routine task test mode.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	periodicalTest(1), sequentialTest(2)

zxAnOtdrRoutineTaskRowStatus		1.3.6.1.4.1.3902.1083.5.2.3.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrRoutineTaskEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrRoutineTaskIfStatusTable		1.3.6.1.4.1.3902.1083.5.2.3.4
OTDR routine task interface status table
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrRoutineTaskIfStatusEntry

zxAnOtdrRoutineTaskIfStatusEntry		1.3.6.1.4.1.3902.1083.5.2.3.4.1
OTDR routine task interface status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrRoutineTaskIfStatusEntry

zxAnOtdrRoutineTaskIfStatus		1.3.6.1.4.1.3902.1083.5.2.3.4.1.1
The result status of OTDR routine test.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), inProgress(2), success(3), failed(4)

zxAnOtdrRoutineTaskIfFailReason		1.3.6.1.4.1.3902.1083.5.2.3.4.1.2
The OTDR routine test failed reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	noError(1), otherErrors(255)

zxAnOtdrFtpServerTable		1.3.6.1.4.1.3902.1083.5.2.4.2
FTP server configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFtpServerEntry

zxAnOtdrFtpServerEntry		1.3.6.1.4.1.3902.1083.5.2.4.2.1
FTP server configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFtpServerEntry

zxAnOtdrFtpServerId		1.3.6.1.4.1.3902.1083.5.2.4.2.1.1
FTP server ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrFtpServerIpAddressType		1.3.6.1.4.1.3902.1083.5.2.4.2.1.2
IP address type of the FTP server.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddressType

zxAnOtdrFtpServerIpAddress		1.3.6.1.4.1.3902.1083.5.2.4.2.1.3
IP address of the FTP server.
Status: current	Access: read-create
OBJECT-TYPE
	InetAddress

zxAnOtdrFtpServerProtocolType		1.3.6.1.4.1.3902.1083.5.2.4.2.1.4
Protocol type of the FTP server. ftp(1): File Transfer Protocol sftp(2): Ssh File Transfer Protocol
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	ftp(1), sftp(2)

zxAnOtdrFtpServerUserName		1.3.6.1.4.1.3902.1083.5.2.4.2.1.5
User name of the FTP server.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrFtpServerUserPwd		1.3.6.1.4.1.3902.1083.5.2.4.2.1.6
User password of the FTP server.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrFtpServerPath		1.3.6.1.4.1.3902.1083.5.2.4.2.1.7
File path which starts from the root directory.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(1..255)

zxAnOtdrFtpServerRowStatus		1.3.6.1.4.1.3902.1083.5.2.4.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFtpServerEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrAlgorithmTable		1.3.6.1.4.1.3902.1083.5.2.5.2
OTDR algorithm table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrAlgorithmEntry

zxAnOtdrAlgorithmEntry		1.3.6.1.4.1.3902.1083.5.2.5.2.1
OTDR algorithm entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrAlgorithmEntry

zxAnOtdrAlgorithmRack		1.3.6.1.4.1.3902.1083.5.2.5.2.1.1
The rack No. of device to be used with OTDR.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnOtdrAlgorithmShelf		1.3.6.1.4.1.3902.1083.5.2.5.2.1.2
The shelf No. of device to be used with OTDR.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnOtdrAlgorithmSlot		1.3.6.1.4.1.3902.1083.5.2.5.2.1.3
The slot No. of device to be used with OTDR.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnOtdrAlgorithmVersion		1.3.6.1.4.1.3902.1083.5.2.5.2.1.4
The OTDR algorithm version of current card.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..64)

zxAnOtdrTestCapDistanceType		1.3.6.1.4.1.3902.1083.5.2.6.1.1.1
The type of the test capacity distance supported by OTDR. global(1): it means getting maximum-minimum distance by the global objects 'zxAnOtdrTestCapMaxDistance' and 'zxAnOtdrTestCapMinDistance'. pulseWidth(2): it means getting maximum-minimum distance by the table objects 'zxAnOtdrTestCapPwDistanceTable'.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	global(1), pulseWidth(2)

zxAnOtdrTestCapMaxDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.1.2
The maximum of the global test capacity distance supported by OTDR.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapMinDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.1.3
The minimum of the global test capacity distance supported by OTDR.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapPwDistanceTable		1.3.6.1.4.1.3902.1083.5.2.6.1.2
OTDR test capacity pulse width distance table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrTestCapPwDistanceEntry

zxAnOtdrTestCapPwDistanceEntry		1.3.6.1.4.1.3902.1083.5.2.6.1.2.1
OTDR test capacity pulse width distance entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrTestCapPwDistanceEntry

zxAnOtdrTestCapPwDistancePw		1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.1
The pulse width supported by OTDR. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width value. e.g., 5 is mapped to 5ns, 200001 is mapped to 2.5ns.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	5..200000 | 200001..300000

zxAnOtdrTestCapPwMaxDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.2
The maximum of the test capacity distance supported by the current pulse width.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapPwMinDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.3
The minimum of the test capacity distance supported by the current pulse width.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapCwDistanceTable		1.3.6.1.4.1.3902.1083.5.2.6.1.3
OTDR test capacity code width distance table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrTestCapCwDistanceEntry

zxAnOtdrTestCapCwDistanceEntry		1.3.6.1.4.1.3902.1083.5.2.6.1.3.1
OTDR test capacity code width distance entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrTestCapCwDistanceEntry

zxAnOtdrTestCapCwDistanceCw		1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.1
The code width supported by OTDR.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	5..1275

zxAnOtdrTestCapCwMaxDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.2
The maximum of the test capacity distance supported by the current code width.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapCwMinDistance		1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.3
The minimum of the test capacity distance supported by the current code width.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	500..300000

zxAnOtdrTestCapMaxDuration		1.3.6.1.4.1.3902.1083.5.2.6.2.1.1
The maximum of the test capacity duration supported by OTDR.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..3600

zxAnOtdrTestCapMinDuration		1.3.6.1.4.1.3902.1083.5.2.6.2.1.2
The minimum of the test capacity duration supported by OTDR.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..3600

zxAnOtdrTestTaskStatusTable		1.3.6.1.4.1.3902.1083.5.2.7.1
OTDR test task status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrTestTaskStatusEntry

zxAnOtdrTestTaskStatusEntry		1.3.6.1.4.1.3902.1083.5.2.7.1.1
OTDR test task status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrTestTaskStatusEntry

zxAnOtdrTestTaskId		1.3.6.1.4.1.3902.1083.5.2.7.1.1.1
OTDR test task ID. The task name is zxAnOtdrRoutineTaskName when the zxAnOtdrTestTaskType is routine, other tests relate to zxAnOtdrFastTestSn.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..128)

zxAnOtdrTestTaskStatus		1.3.6.1.4.1.3902.1083.5.2.7.1.1.2
The OTDR test task status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), waiting(2), inProgress(3), suspended(4), success(5), failed(6)

zxAnOtdrTestTaskUnexecutedReason		1.3.6.1.4.1.3902.1083.5.2.7.1.1.3
The OTDR test task unexecuted reason.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), preempted(2), waitingPortTestFinished(3), queuing(4), others(255)

zxAnOtdrTestTaskPriority		1.3.6.1.4.1.3902.1083.5.2.7.1.1.4
The OTDR test task priority.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	1..256

zxAnOtdrTestTaskWaitingTime		1.3.6.1.4.1.3902.1083.5.2.7.1.1.5
The OTDR test task waiting time. When the task is in progress, the waiting time is 0.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..1440

zxAnOtdrTestTaskRequestSource		1.3.6.1.4.1.3902.1083.5.2.7.1.1.6
The OTDR test task request source.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	ems(1), tl1(2), app(3)

zxAnOtdrTestTaskType		1.3.6.1.4.1.3902.1083.5.2.7.1.1.7
The task type. fast(1): - Fast test. health(2): - Health database test. adHoc(3): - Ad hoc test. reflector(4): - Reflector test. alarmTrigger(5): - Alarm triggered test. adaptive(6): - Adaptive test. acceptance(7): - Acceptance test. labefaction(8): - Labefaction test. lineDetectionHealth(9): - Line detection health database test. lineDetectionFast(10): - Line detection fast test. bothway(11): - Bothway test. periodicalRoutineTest(50): - Periodical routine test. sequentialRoutineTest(51): - Sequential routine test.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	fast(1), health(2), adHoc(3), reflector(4), alarmTrigger(5), adaptive(6), acceptance(7), labefaction(8), lineDetectionHealth(9), lineDetectionFast(10), bothway(11), periodicalRoutineTest(50), sequentialRoutineTest(51)

zxAnOtdrTestTaskStartTime		1.3.6.1.4.1.3902.1083.5.2.7.1.1.8
The test task starting time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zxAnOtdrTestTaskRemainTimeout		1.3.6.1.4.1.3902.1083.5.2.7.1.1.9
The OTDR test task remaining timeout. A negative indicates the task should never be timeout. A zero indicates the task has been timeout.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-1..1440

zxAnOtdrFastTestTaskConfTable		1.3.6.1.4.1.3902.1083.5.2.7.2
OTDR fast test task configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFastTestTaskConfEntry

zxAnOtdrFastTestTaskConfEntry		1.3.6.1.4.1.3902.1083.5.2.7.2.1
OTDR fast test task configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFastTestTaskConfEntry

zxAnOtdrFastTaskConfWaitTimeout		1.3.6.1.4.1.3902.1083.5.2.7.2.1.1
Fast test waiting timeout. The test will be cancelled when timeout.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1440

zxAnOtdrFastTaskConfRowStatus		1.3.6.1.4.1.3902.1083.5.2.7.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrMonNodeGlobalObjects		1.3.6.1.4.1.3902.1083.5.2.8.1
OBJECT IDENTIFIER

zxAnOtdrMonNodeMonitorStatus		1.3.6.1.4.1.3902.1083.5.2.8.1.1
OTDR node monitoring status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	monitoring(1), idle(2)

zxAnOtdrMonNodeMonitorAction		1.3.6.1.4.1.3902.1083.5.2.8.1.2
OTDR node monitoring action.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1), stop(2)

zxAnOtdrMonNodeConfTable		1.3.6.1.4.1.3902.1083.5.2.8.2
OTDR monitoring node configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrMonNodeConfEntry

zxAnOtdrMonNodeConfEntry		1.3.6.1.4.1.3902.1083.5.2.8.2.1
OTDR monitoring node configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrMonNodeConfEntry

zxAnOtdrMonNodeSn		1.3.6.1.4.1.3902.1083.5.2.8.2.1.1
OTDR monitoring node serial number.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..128)

zxAnOtdrMonNodePosition		1.3.6.1.4.1.3902.1083.5.2.8.2.1.2
OTDR monitoring node position. Value 0 means the monitoring node open/close test is not executed or the test is failed.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..200000

zxAnOtdrMonNodeStatus		1.3.6.1.4.1.3902.1083.5.2.8.2.1.3
OTDR monitoring node status. A zxAnOtdrMonNodeOpenedAlm trap will be sent when the zxAnOtdrMonNodeStatus is opened. A zxAnOtdrMonNodeOpenedClr trap will be sent when the zxAnOtdrMonNodeStatus is closed.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	opened(1), closed(2), unknown(255)

zxAnOtdrNodeConfRowStatus		1.3.6.1.4.1.3902.1083.5.2.8.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrFastTestIfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrMonPortStatusTable		1.3.6.1.4.1.3902.1083.5.2.8.3
OTDR monitoring port status table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrMonPortStatusEntry

zxAnOtdrMonPortStatusEntry		1.3.6.1.4.1.3902.1083.5.2.8.3.1
OTDR monitoring port status entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrMonPortStatusEntry

zxAnOtdrMonPortLinkStatus		1.3.6.1.4.1.3902.1083.5.2.8.3.1.1
OTDR monitoring port link status. A zxAnOtdrMonPortLinkAbnormalAlm trap will be sent when the zxAnOtdrMonPortLinkStatus is abnormal. A zxAnOtdrMonPortLinkAbnormalClr trap will be sent when the zxAnOtdrMonPortLinkStatus is normal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), abnormal(2), unknown(255)

zxAnOtdrMonReflectLabelTable		1.3.6.1.4.1.3902.1083.5.2.8.4
OTDR reflector labelling table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrMonReflectLabelEntry

zxAnOtdrMonReflectLabelEntry		1.3.6.1.4.1.3902.1083.5.2.8.4.1
OTDR reflector labelling entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrMonReflectLabelEntry

zxAnOtdrMonReflectLabelAction		1.3.6.1.4.1.3902.1083.5.2.8.4.1.1
OTDR reflector labelling action.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1)

zxAnOtdrMonReflectLabelStatus		1.3.6.1.4.1.3902.1083.5.2.8.4.1.2
OTDR reflector labelling status.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	notStarted(1), inProgress(2), success(3), failed(4), stopped(5), waiting(6)

zxAnOtdrMonReflectLabelLastTime		1.3.6.1.4.1.3902.1083.5.2.8.4.1.3
OTDR reflector last labelling time.
Status: current	Access: read-only
OBJECT-TYPE
	DateAndTime

zxAnOtdrOptModuleGlobalObjects		1.3.6.1.4.1.3902.1083.5.2.9.1
OBJECT IDENTIFIER

zxAnOtdrOptModuleStatus		1.3.6.1.4.1.3902.1083.5.2.9.1.1
The OTDR optical module status. A zxAnOtdrOptModuleAbnormalAlm trap will be sent when the zxAnOtdrOptModuleStatus is abnormal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), abnormal(2)

zxAnOtdrOptModuleIfTable		1.3.6.1.4.1.3902.1083.5.2.9.2
OTDR optical module interface table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrOptModuleIfEntry

zxAnOtdrOptModuleIfEntry		1.3.6.1.4.1.3902.1083.5.2.9.2.1
OTDR optical module interface entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrOptModuleIfEntry

zxAnOtdrOptModuleIfBasicPwr		1.3.6.1.4.1.3902.1083.5.2.9.2.1.1
OTDR interface basic optical power. '65535' means the basic optical power is invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-10000..10000 | 65535

zxAnOtdrOptModuleIfCurrentPwr		1.3.6.1.4.1.3902.1083.5.2.9.2.1.2
OTDR interface current optical power. '65535' means the current optical power is invalid.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	-10000..10000 | 65535

zxAnOtdrOptModuleIfPwrVaryThresh		1.3.6.1.4.1.3902.1083.5.2.9.2.1.3
OTDR interface optical power variaton threshold. A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is higher than this threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrOptModuleIfPwrAdjust		1.3.6.1.4.1.3902.1083.5.2.9.2.1.4
To adjust the OTDR basic optical power.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	start(1)

zxAnOtdrFaultLocateGlobalObjects		1.3.6.1.4.1.3902.1083.5.2.10.1
OBJECT IDENTIFIER

zxAnOtdrGlobalP2mpFaultLocatePrf		1.3.6.1.4.1.3902.1083.5.2.10.1.1
OTDR global P2MP fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrGlobalP2pFaultLocatePrf		1.3.6.1.4.1.3902.1083.5.2.10.1.2
OTDR global P2P fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigured.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrP2mpFaultLocatePrfTable		1.3.6.1.4.1.3902.1083.5.2.10.2
OTDR P2MP fault locating threshold profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrP2mpFaultLocatePrfEntry

zxAnOtdrP2mpFaultLocatePrfEntry		1.3.6.1.4.1.3902.1083.5.2.10.2.1
OTDR P2MP fault locating threshold profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrP2mpFaultLocatePrfEntry

zxAnOtdrP2mpFaultLocatePrfName		1.3.6.1.4.1.3902.1083.5.2.10.2.1.1
OTDR P2MP fault locating threshold profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrP2mpPositionDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.2
OTDR P2MP position difference threshold.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1000

zxAnOtdrP2mpTrunkBrokenLossDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.3
OTDR P2MP trunk broken insertion loss difference threshold. This threshold is used to locate trunk broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpTrunkBrokenLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.4
OTDR P2MP trunk broken insertion loss threshold. This threshold is used to locate trunk broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpTrunkAttenLossDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.5
OTDR P2MP trunk attenuation insertion loss difference threshold. This threshold is used to locate trunk attenuation fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpTrunkAttenLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.6
OTDR P2MP trunk attenuation insertion loss threshold. This threshold is used to locate trunk attenuation fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpTrunkAbnPeakDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.7
OTDR P2MP trunk abnormal reflective peak difference threshold. This threshold is used to locate trunk abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpTrunkAbnRtnLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.8
OTDR P2MP trunk abnormal return loss threshold. This threshold is used to locate trunk abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-10000..10000

zxAnOtdrP2mpTrunkAbnLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.9
OTDR P2MP trunk abnormal insertion loss threshold. This threshold is used to locate trunk abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpBranchBrokenRtnLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.10
OTDR P2MP branch broken return loss threshold. This threshold is used to locate branch broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-10000..10000

zxAnOtdrP2mpBranchBrokenLoss		1.3.6.1.4.1.3902.1083.5.2.10.2.1.11
OTDR P2MP branch broken insertion loss threshold. This threshold is used to locate branch broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpBranchBrokenPeakDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.12
OTDR P2MP branch broken reflective peak difference threshold. This threshold is used to locate branch broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpBranchAbnPeakDiff		1.3.6.1.4.1.3902.1083.5.2.10.2.1.13
OTDR P2MP branch abnormal reflective peak difference threshold. This threshold is used to locate branch abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2mpFaultLocPrfRowStatus		1.3.6.1.4.1.3902.1083.5.2.10.2.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrP2pFaultLocatePrfTable		1.3.6.1.4.1.3902.1083.5.2.10.3
OTDR P2P fault locating threshold profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrP2pFaultLocatePrfEntry

zxAnOtdrP2pFaultLocatePrfEntry		1.3.6.1.4.1.3902.1083.5.2.10.3.1
OTDR P2P fault locating threshold profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrP2pFaultLocatePrfEntry

zxAnOtdrP2pFaultLocatePrfName		1.3.6.1.4.1.3902.1083.5.2.10.3.1.1
OTDR P2P fault locating threshold profile name.
Status: current	Access: not-accessible
OBJECT-TYPE
	DisplayString	Size(1..32)

zxAnOtdrP2pPositionDiff		1.3.6.1.4.1.3902.1083.5.2.10.3.1.2
OTDR P2P position difference threshold.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..1000

zxAnOtdrP2pBrokenLossDiff		1.3.6.1.4.1.3902.1083.5.2.10.3.1.3
OTDR P2P link broken insertion loss difference threshold. This threshold is used to locate link broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pBrokenLoss		1.3.6.1.4.1.3902.1083.5.2.10.3.1.4
OTDR P2P link broken insertion loss threshold. This threshold is used to locate link broken fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pAttenuationLossDiff		1.3.6.1.4.1.3902.1083.5.2.10.3.1.5
OTDR P2P link attenuation insertion loss difference threshold. This threshold is used to locate link attenuation fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pAttenuationLoss		1.3.6.1.4.1.3902.1083.5.2.10.3.1.6
OTDR P2P link attenuation insertion loss threshold. This threshold is used to locate link attenuation fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pAbnormalPeakDiff		1.3.6.1.4.1.3902.1083.5.2.10.3.1.7
OTDR P2P link abnormal reflective peak difference threshold. This threshold is used to locate link abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pAbnormalReturnLoss		1.3.6.1.4.1.3902.1083.5.2.10.3.1.8
OTDR P2P link abnormal return loss threshold. This threshold is used to locate link abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-10000..10000

zxAnOtdrP2pAbnormalLoss		1.3.6.1.4.1.3902.1083.5.2.10.3.1.9
OTDR P2P link abnormal insertion loss threshold. This threshold is used to locate link abnormal fault.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrP2pFaultLocPrfRowStatus		1.3.6.1.4.1.3902.1083.5.2.10.3.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrFaultLocateIfConfTable		1.3.6.1.4.1.3902.1083.5.2.10.4
OTDR interface fault locating threshold profile table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrFaultLocateIfConfEntry

zxAnOtdrFaultLocateIfConfEntry		1.3.6.1.4.1.3902.1083.5.2.10.4.1
OTDR interface fault locating threshold profile entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrFaultLocateIfConfEntry

zxAnOtdrFaultLocateIfP2mpPrf		1.3.6.1.4.1.3902.1083.5.2.10.4.1.1
OTDR fault locating P2MP threshold profile name. Empty string means unconfigured.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnOtdrFaultLocateIfP2pPrf		1.3.6.1.4.1.3902.1083.5.2.10.4.1.2
OTDR fault locating P2P threshold profile name. Empty string means unconfigured.
Status: current	Access: read-create
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnOtdrFaultLocateIfRowStatus		1.3.6.1.4.1.3902.1083.5.2.10.4.1.50
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4), and must comply with the multi-variables binding rule described in zxAnOtdrTestParamPrfEntry. To delete a row in this table, a manager must set this object to destroy(6). To get this object, the agent always returns active(1).
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

zxAnOtdrIfEventBatchConfTable		1.3.6.1.4.1.3902.1083.5.2.11.2
OTDR interface event batch configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrIfEventBatchConfEntry

zxAnOtdrIfEventBatchConfEntry		1.3.6.1.4.1.3902.1083.5.2.11.2.1
OTDR interface event batch configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrIfEventBatchConfEntry

zxAnOtdrIfEventBatchConfDevTypes		1.3.6.1.4.1.3902.1083.5.2.11.2.1.1
OTDR interface event device type list. The format of the value is as follows: '1:3-6,10;2:2,8'. It means that the device type value of the event ID including 3,4,5,6,10 is 1 and the device type value of the event ID including 2,8 is 2. It will return the empty string when reading this object.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrIfEventConfTable		1.3.6.1.4.1.3902.1083.5.2.11.3
OTDR interface event configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrIfEventConfEntry

zxAnOtdrIfEventConfEntry		1.3.6.1.4.1.3902.1083.5.2.11.3.1
OTDR interface event configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrIfEventConfEntry

zxAnOtdrIfEventConfEventId		1.3.6.1.4.1.3902.1083.5.2.11.3.1.1
OTDR interface event ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32	1..500

zxAnOtdrIfEventConfDevType		1.3.6.1.4.1.3902.1083.5.2.11.3.1.2
OTDR interface event device type. Value 0 means the event device type is empty.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..100

zxAnOtdrIfEventConfDevDesc		1.3.6.1.4.1.3902.1083.5.2.11.3.1.3
OTDR interface event device description.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..256)

zxAnOtdrAdaptiveTestLinkObjects		1.3.6.1.4.1.3902.1083.5.2.12.2
OBJECT IDENTIFIER

zxAnOtdrAdaptTestLinkGlbObjects		1.3.6.1.4.1.3902.1083.5.2.12.2.1
OBJECT IDENTIFIER

zxAnOtdrATLinkLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.2.1.2
The global link loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100000

zxAnOtdrATLinkRtnLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.2.1.3
The global link return loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	150..700

zxAnOtdrAdaptTestLinkIfConfTable		1.3.6.1.4.1.3902.1083.5.2.12.2.2
OTDR adaptive test link threshold interface configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrAdaptTestLinkIfConfEntry

zxAnOtdrAdaptTestLinkIfConfEntry		1.3.6.1.4.1.3902.1083.5.2.12.2.2.1
OTDR adaptive test link threshold interface configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrAdaptTestLinkIfConfEntry

zxAnOtdrATLinkIfParamType		1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.1
The link parameters type of the OTDR adaptive test.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	global(1), userDefined(2)

zxAnOtdrATLinkIfLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.2
The link loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	1..100000

zxAnOtdrATLinkIfRtnLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.3
The link return loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	150..700

zxAnOtdrAdaptiveTestDevObjects		1.3.6.1.4.1.3902.1083.5.2.12.3
OBJECT IDENTIFIER

zxAnOtdrAdaptTestDevGlbObjects		1.3.6.1.4.1.3902.1083.5.2.12.3.1
OBJECT IDENTIFIER

zxAnOtdrATDevFiberAttenThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.2
The global device fiber attenuation threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	100..5000

zxAnOtdrATDevLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.3
The global device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.4
The global device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevConnLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.5
The global device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevConnReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.6
The global device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevSpliceLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.7
The global device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevSpReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.8
The global device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevSp2LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.9
The global device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2500..26000

zxAnOtdrATDevSp4LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.10
The global device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	6000..26000

zxAnOtdrATDevSp8LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.11
The global device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	9000..26000

zxAnOtdrATDevSp16LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.12
The global device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	12500..26000

zxAnOtdrATDevSp32LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.13
The global device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	15500..26000

zxAnOtdrATDevSp64LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.14
The global device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	19000..26000

zxAnOtdrATDevSp128LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.15
The global device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	22500..26000

zxAnOtdrATDevOnuReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.1.16
The global device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrAdaptTestDevIfConfTable		1.3.6.1.4.1.3902.1083.5.2.12.3.2
OTDR adaptive test device threshold interface configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrAdaptTestDevIfConfEntry

zxAnOtdrAdaptTestDevIfConfEntry		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1
OTDR adaptive test device threshold interface configuration evntry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrAdaptTestDevIfConfEntry

zxAnOtdrATDevIfParamType		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.1
The device parameters type of the OTDR adaptive test.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	global(1), userDefined(2)

zxAnOtdrATDevIfFiberAttenThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.2
The device fiber attenuation threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	100..5000

zxAnOtdrATDevIfLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.3
The device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevIfReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.4
The device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevIfConnLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.5
The device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevIfConnReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.6
The device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevIfSpliceLossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.7
The device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-5000..5000

zxAnOtdrATDevIfSpReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.8
The device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrATDevIfSp2LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.9
The device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	2500..26000

zxAnOtdrATDevIfSp4LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.10
The device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	6000..26000

zxAnOtdrATDevIfSp8LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.11
The device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	9000..26000

zxAnOtdrATDevIfSp16LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.12
The device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	12500..26000

zxAnOtdrATDevIfSp32LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.13
The device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	15500..26000

zxAnOtdrATDevIfSp64LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.14
The device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	19000..26000

zxAnOtdrATDevIfSp128LossThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.15
The device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	22500..26000

zxAnOtdrATDevIfOnuReflThresh		1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.16
The device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2).
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	-800..-1

zxAnOtdrDetectionLineConfTable		1.3.6.1.4.1.3902.1083.5.2.13.2
OTDR detection line configuration table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		ZxAnOtdrDetectionLineConfEntry

zxAnOtdrDetectionLineConfEntry		1.3.6.1.4.1.3902.1083.5.2.13.2.1
OTDR detection line configuration entry.
Status: current	Access: not-accessible
OBJECT-TYPE
	ZxAnOtdrDetectionLineConfEntry

zxAnOtdrDetectLineId		1.3.6.1.4.1.3902.1083.5.2.13.2.1.1
OTDR detection line ID.
Status: current	Access: not-accessible
OBJECT-TYPE
	Integer32

zxAnOtdrDetectLineLength		1.3.6.1.4.1.3902.1083.5.2.13.2.1.2
OTDR detection line length.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32	0..3000000

zxAnOtdrDetectLineAlias		1.3.6.1.4.1.3902.1083.5.2.13.2.1.3
OTDR detection line alias.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString	Size(0..32)

zxAnOtdrDetectLinePositionDiff		1.3.6.1.4.1.3902.1083.5.2.13.2.1.4
OTDR detection line position difference threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrDetectLineAbnPeakDiff		1.3.6.1.4.1.3902.1083.5.2.13.2.1.5
OTDR detection line abnormal reflective peak difference threshold.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32	0..10000

zxAnOtdrDetectLineStatus		1.3.6.1.4.1.3902.1083.5.2.13.2.1.6
OTDR detection line status. A zxAnOtdrDetectionLineAbnAlm trap will be sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or fiberBroken. A zxAnOtdrDetectionLineAbnClr trap will be sent when the zxAnOtdrDetectionLineStatus is normal.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	normal(1), peakAbnormal(2), fiberBroken(3), unknown(255)

zxAnOtdrRoutineTaskFinished		1.3.6.1.4.1.3902.1083.5.3.1
A zxAnOtdrRoutineTaskFinished is sent when the agent has detected that the OTDR routine test task finished.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrPortTestFinished		1.3.6.1.4.1.3902.1083.5.3.2
A zxAnOtdrPortTestFinished is sent when the agent has detected that the OTDR port test finished.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvCtrlCardHighTempAlm		1.3.6.1.4.1.3902.1083.5.3.50.1
A zxAnOtdrEnvCtrlCardHighTempAlm trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempHighThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvCtrlCardHighTempClr		1.3.6.1.4.1.3902.1083.5.3.50.2
A zxAnOtdrEnvCtrlCardHighTempClr trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempHighThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvCtrlCardLowTempAlm		1.3.6.1.4.1.3902.1083.5.3.50.3
A zxAnOtdrEnvCtrlCardLowTempAlm trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempLowThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvCtrlCardLowTempClr		1.3.6.1.4.1.3902.1083.5.3.50.4
A zxAnOtdrEnvCtrlCardLowTempClr trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempLowThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvFanFailureAlm		1.3.6.1.4.1.3902.1083.5.3.50.5
A zxAnOtdrEnvFanFailureAlm trap is sent when the zxAnOtdrEnvFanStatus is abnormal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvFanFailureClr		1.3.6.1.4.1.3902.1083.5.3.50.6
A zxAnOtdrEnvFanFailureClr trap is sent when the zxAnOtdrEnvFanStatus is normal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvApdHighTempAlm		1.3.6.1.4.1.3902.1083.5.3.50.7
A zxAnOtdrEnvApdHighTempAlm trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempHighThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvApdHighTempClr		1.3.6.1.4.1.3902.1083.5.3.50.8
A zxAnOtdrEnvApdHighTempClr trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempHighThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvApdLowTempAlm		1.3.6.1.4.1.3902.1083.5.3.50.9
A zxAnOtdrEnvApdLowTempAlm trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempLowThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrEnvApdLowTempClr		1.3.6.1.4.1.3902.1083.5.3.50.10
A zxAnOtdrEnvApdLowTempClr trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempLowThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrPortUtilExceedAlm		1.3.6.1.4.1.3902.1083.5.3.50.11
A zxAnOtdrPortUtilExceedAlm trap is sent when the current port utilization is higher than zxAnOtdrPortUtilizationThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrPortUtilExceedClr		1.3.6.1.4.1.3902.1083.5.3.50.12
A zxAnOtdrPortUtilExceedClr trap is sent when the current port utilization is lower than zxAnOtdrPortUtilizationThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrMonNodeOpenedAlm		1.3.6.1.4.1.3902.1083.5.3.51.1
A zxAnOtdrMonNodeOpenedAlm trap is sent when the zxAnOtdrMonNodeStatus is opened.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrMonNodeOpenedClr		1.3.6.1.4.1.3902.1083.5.3.51.2
A zxAnOtdrMonNodeOpenedClr trap is sent when the zxAnOtdrMonNodeStatus is closed.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrMonPortLinkAbnormalAlm		1.3.6.1.4.1.3902.1083.5.3.51.3
A zxAnOtdrMonPortLinkAbnormalAlm trap is sent when the zxAnOtdrMonPortLinkStatus is abnormal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrMonPortLinkAbnormalClr		1.3.6.1.4.1.3902.1083.5.3.51.4
A zxAnOtdrMonPortLinkAbnormalClr trap is sent when the zxAnOtdrMonPortLinkStatus is normal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrOptModuleAbnormalAlm		1.3.6.1.4.1.3902.1083.5.3.52.1
A zxAnOtdrOptModuleAbnormalAlm is sent when the zxAnOtdrOptModuleStatus is abnormal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrOptModuleAbnormalClr		1.3.6.1.4.1.3902.1083.5.3.52.2
A zxAnOtdrOptModuleAbnormalClr is sent when the zxAnOtdrOptModuleStatus is normal.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrOptPowerVaryExceedAlm		1.3.6.1.4.1.3902.1083.5.3.52.3
A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is higher than zxAnOtdrOptModuleIfPwrVaryThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrOptPowerVaryExceedClr		1.3.6.1.4.1.3902.1083.5.3.52.4
A zxAnOtdrOptPowerVaryExceedClr trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is lower than zxAnOtdrOptModuleIfPwrVaryThresh.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrDetectionLineAbnAlm		1.3.6.1.4.1.3902.1083.5.3.53.1
A zxAnOtdrDetectionLineAbnAlm is sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or brokenFiber.
Status: current	Access: read-only
NOTIFICATION-TYPE

zxAnOtdrDetectionLineAbnClr		1.3.6.1.4.1.3902.1083.5.3.53.2
A zxAnOtdrDetectionAbnClr is sent when the zxAnOtdrDetectionLineStatus is normal.
Status: current	Access: read-only
NOTIFICATION-TYPE