XAVI-XG6846-MIB

File: XAVI-XG6846-MIB.mib (15928 bytes)

Imported modules

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
TimeTicks	Counter32	snmpModules
enterprises	mib-2	IpAddress
Integer32	Unsigned32	DisplayString
TestAndIncr	TimeStamp	MODULE-COMPLIANCE
OBJECT-GROUP	NOTIFICATION-GROUP

Defined Types

ModeEntry
SEQUENCE
	lanportIndex	Unsigned32
	lanportName	DisplayString
	lanportspeed	INTEGER
	lanportpause	INTEGER

QosEntry
SEQUENCE
	qosIndex	Unsigned32
	qmapping	Unsigned32

SettingEntry
SEQUENCE
	portIndex	Unsigned32
	vlanid	Unsigned32
	priority	Unsigned32
	qmode	INTEGER
	dscpEnable	INTEGER

GroupEntry
SEQUENCE
	groupIndex	Unsigned32
	groupid	Unsigned32
	lan1	INTEGER
	lan2	INTEGER
	lan3	INTEGER
	lan4	INTEGER
	wan	INTEGER

PortStatEntry
SEQUENCE
	statIndex	Unsigned32
	portName	DisplayString
	unicastsReceived	Unsigned32
	broadcastsReceived	Unsigned32
	multicastsReceived	Unsigned32
	fcsErrorReceived	Unsigned32
	pauseReceived	Unsigned32
	unicastsTransmitted	Unsigned32
	broadcastsTransmitted	Unsigned32
	multicastsTransmitted	Unsigned32
	fcsErrorTransmitted	Unsigned32
	pauseTransmitted	Unsigned32
	speed	DisplayString

Defined Values

xg6846		1.3.6.1.4.1.12919
OBJECT IDENTIFIER

catv		1.3.6.1.4.1.12919.1
OBJECT IDENTIFIER

portmode		1.3.6.1.4.1.12919.2
OBJECT IDENTIFIER

qos		1.3.6.1.4.1.12919.3
OBJECT IDENTIFIER

vlan		1.3.6.1.4.1.12919.4
OBJECT IDENTIFIER

portStatistic		1.3.6.1.4.1.12919.5
OBJECT IDENTIFIER

ddminfo		1.3.6.1.4.1.12919.6
OBJECT IDENTIFIER

internetPort		1.3.6.1.4.1.12919.7
OBJECT IDENTIFIER

reboot		1.3.6.1.4.1.12919.8
OBJECT IDENTIFIER

tftp		1.3.6.1.4.1.12919.9
OBJECT IDENTIFIER

portPower		1.3.6.1.4.1.12919.10
OBJECT IDENTIFIER

jumb		1.3.6.1.4.1.12919.11
OBJECT IDENTIFIER

deviceinfo		1.3.6.1.4.1.12919.12
OBJECT IDENTIFIER

catvEnable		1.3.6.1.4.1.12919.1.1
catv switch function.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

lanportTable		1.3.6.1.4.1.12919.2.1
LAN port table.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		ModeEntry

modeEntry		1.3.6.1.4.1.12919.2.1.1
set port mode entry.
Status: current	Access: read-write
OBJECT-TYPE
	ModeEntry

lanportIndex		1.3.6.1.4.1.12919.2.1.1.1
lan port entry index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

lanportName		1.3.6.1.4.1.12919.2.1.1.2
lan port name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

lanportspeed		1.3.6.1.4.1.12919.2.1.1.3
port speed value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	auto(0), speed10mFD(1), speed10mHD(2), speed100mFD(3), speed100mHD(4)

lanportpause		1.3.6.1.4.1.12919.2.1.1.4
port 802.1P enable/disable value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	off(0), on(1)

qosTable		1.3.6.1.4.1.12919.3.1
qos table.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		QosEntry

qosEntry		1.3.6.1.4.1.12919.3.1.1
qos list entry.
Status: current	Access: read-write
OBJECT-TYPE
	QosEntry

qosIndex		1.3.6.1.4.1.12919.3.1.1.1
qos list entry index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

qmapping		1.3.6.1.4.1.12919.3.1.1.2
mapping queue value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

portTable		1.3.6.1.4.1.12919.4.1
all port setting table.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		SettingEntry

portEntry		1.3.6.1.4.1.12919.4.1.1
port list entry.
Status: current	Access: read-write
OBJECT-TYPE
	SettingEntry

portIndex		1.3.6.1.4.1.12919.4.1.1.1
port num index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

vlanid		1.3.6.1.4.1.12919.4.1.1.2
port vlan id value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

priority		1.3.6.1.4.1.12919.4.1.1.3
port default priority value.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

qmode		1.3.6.1.4.1.12919.4.1.1.4
port 802.1Q mode value.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	disable(0), fallback(1), check(2), secure(3)

dscpEnable		1.3.6.1.4.1.12919.4.1.1.5
DSCP enable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

vlangroupTable		1.3.6.1.4.1.12919.4.2
VLAN group setting table.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		GroupEntry

groupEntry		1.3.6.1.4.1.12919.4.2.1
vlan group list entry.
Status: current	Access: read-write
OBJECT-TYPE
	GroupEntry

groupIndex		1.3.6.1.4.1.12919.4.2.1.1
vlan group index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

groupid		1.3.6.1.4.1.12919.4.2.1.2
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	Unsigned32

lan1		1.3.6.1.4.1.12919.4.2.1.3
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notMember(0), egressUntagged(1), egressTagged(2)

lan2		1.3.6.1.4.1.12919.4.2.1.4
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notMember(0), egressUntagged(1), egressTagged(2)

lan3		1.3.6.1.4.1.12919.4.2.1.5
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notMember(0), egressUntagged(1), egressTagged(2)

lan4		1.3.6.1.4.1.12919.4.2.1.6
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notMember(0), egressUntagged(1), egressTagged(2)

wan		1.3.6.1.4.1.12919.4.2.1.7
vlan group id.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	notMember(0), egressUntagged(1), egressTagged(2)

statisticTable		1.3.6.1.4.1.12919.5.1
port statistics table.
Status: current	Access: read-write
OBJECT-TYPE
	SEQUENCE OF
		PortStatEntry

portStatEntry		1.3.6.1.4.1.12919.5.1.1
port statistics list entry.
Status: current	Access: read-write
OBJECT-TYPE
	PortStatEntry

statIndex		1.3.6.1.4.1.12919.5.1.1.1
ports entry index.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

portName		1.3.6.1.4.1.12919.5.1.1.2
port name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

unicastsReceived		1.3.6.1.4.1.12919.5.1.1.3
unicasts Received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

broadcastsReceived		1.3.6.1.4.1.12919.5.1.1.4
broadcasts Received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

multicastsReceived		1.3.6.1.4.1.12919.5.1.1.5
multicasts Received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

fcsErrorReceived		1.3.6.1.4.1.12919.5.1.1.6
fcsError Received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

pauseReceived		1.3.6.1.4.1.12919.5.1.1.7
pause Received.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

unicastsTransmitted		1.3.6.1.4.1.12919.5.1.1.8
unicasts Transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

broadcastsTransmitted		1.3.6.1.4.1.12919.5.1.1.9
broadcasts Transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

multicastsTransmitted		1.3.6.1.4.1.12919.5.1.1.10
multicasts Transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

fcsErrorTransmitted		1.3.6.1.4.1.12919.5.1.1.11
fcsError Transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

pauseTransmitted		1.3.6.1.4.1.12919.5.1.1.12
pause Transmitted.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

speed		1.3.6.1.4.1.12919.5.1.1.13
port speed duplex mode status.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

vendorName		1.3.6.1.4.1.12919.6.1
DDM Vendor Name.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

vendorOui		1.3.6.1.4.1.12919.6.2
DDM Vendor OUI.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

vendorPn		1.3.6.1.4.1.12919.6.3
DDM Vendor PN.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

vendorRev		1.3.6.1.4.1.12919.6.4
DDM Vendor REV.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

temperature		1.3.6.1.4.1.12919.6.5
DDM Temperature.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

voltage		1.3.6.1.4.1.12919.6.6
DDM Voltage.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

bias		1.3.6.1.4.1.12919.6.7
DDM Bias.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

txPower		1.3.6.1.4.1.12919.6.8
DDM TX Power.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

rxPower		1.3.6.1.4.1.12919.6.9
DDM Rx Power.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

wanType		1.3.6.1.4.1.12919.7.1
wan protocol type.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	dhcp(1), staticIp(2)

hostname		1.3.6.1.4.1.12919.7.2
the dns host name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

domainame		1.3.6.1.4.1.12919.7.3
the dns domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticDns		1.3.6.1.4.1.12919.7.4
static dns enable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

primaryDns		1.3.6.1.4.1.12919.7.5
the primary dns.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

secondaryDns		1.3.6.1.4.1.12919.7.6
the secodary dns.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpHostName		1.3.6.1.4.1.12919.7.7
the static Ip dns host name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpDomainName		1.3.6.1.4.1.12919.7.8
the static ip dns domain name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpAddr		1.3.6.1.4.1.12919.7.9
The static ip address .
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpSubMask		1.3.6.1.4.1.12919.7.10
The static subnet mask .
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpGateway		1.3.6.1.4.1.12919.7.11
The static gateway .
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpPrimaryDns		1.3.6.1.4.1.12919.7.12
the primary dns.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

staticIpSecondaryDns		1.3.6.1.4.1.12919.7.13
the secodary dns.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

rebootEnable		1.3.6.1.4.1.12919.8.1
catv switch function.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

tftpSevIp		1.3.6.1.4.1.12919.9.1
The tftp server ip.
Status: current	Access: read-write
OBJECT-TYPE
	IpAddress

fileName		1.3.6.1.4.1.12919.9.2
The file name.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

fileType		1.3.6.1.4.1.12919.9.3
i for image and c for configuration data
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

action		1.3.6.1.4.1.12919.9.4
Get or Put file action,g for get file and p for put file.
Status: current	Access: read-write
OBJECT-TYPE
	DisplayString

adminStatus		1.3.6.1.4.1.12919.9.5
administrative status.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

operStatus		1.3.6.1.4.1.12919.9.6
vendor specific info.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

port1		1.3.6.1.4.1.12919.10.1
lan port enable/disable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

port2		1.3.6.1.4.1.12919.10.2
lan port enable/disable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

port3		1.3.6.1.4.1.12919.10.3
lan port enable/disable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

port4		1.3.6.1.4.1.12919.10.4
lan port enable/disable.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	enable(1), disable(0)

jumblan1		1.3.6.1.4.1.12919.11.1
lan jumb mode 1522/2048/10240.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mode1(0), mode2(1), mode3(2)

jumblan2		1.3.6.1.4.1.12919.11.2
lan jumb mode 1522/2048/10240.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mode1(0), mode2(1), mode3(2)

jumblan3		1.3.6.1.4.1.12919.11.3
lan jumb mode 1522/2048/10240.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mode1(0), mode2(1), mode3(2)

jumblan4		1.3.6.1.4.1.12919.11.4
lan jumb mode 1522/2048/10240.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mode1(0), mode2(1), mode3(2)

jumbwan		1.3.6.1.4.1.12919.11.5
lan jumb mode 1522/2048/10240.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	mode1(0), mode2(1), mode3(2)

serialnum		1.3.6.1.4.1.12919.12.1
display device serial number.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor