Wellfleet-TELNET-MIB
File:
Wellfleet-TELNET-MIB.mib (8045 bytes)
Imported modules
Imported symbols
Defined Values
wfTelnet |
1.3.6.1.4.1.18.3.5.3.7.1 |
OBJECT IDENTIFIER |
|
|
|
wfTelnetDelete |
1.3.6.1.4.1.18.3.5.3.7.1.1 |
Create/Delete parameter. Default is created.
Users perform a set operation on this
object in order to create/delete TELNET. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
created(1), deleted(2) |
|
wfTelnetDisable |
1.3.6.1.4.1.18.3.5.3.7.1.2 |
Enables or Disables TELNET Subsystem |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetLinesPerScreen |
1.3.6.1.4.1.18.3.5.3.7.1.3 |
Number of lines which can be displayed in one screen on the Telnet
Technician Interface console.
(Default value if NAWS option not negotiated) |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
wfTelnetMoreDisable |
1.3.6.1.4.1.18.3.5.3.7.1.4 |
Enable the 'more' feature on the Telnet Technician Interface console |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetPrompt |
1.3.6.1.4.1.18.3.5.3.7.1.5 |
Character string which will be used as the system prompt on
the Telnet Technician Interface console |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
wfTelnetLoginTimeOut |
1.3.6.1.4.1.18.3.5.3.7.1.6 |
Time out in minutes to Disconnect when at the login prompt |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..99 |
|
wfTelnetPasswordTimeOut |
1.3.6.1.4.1.18.3.5.3.7.1.7 |
Timout in minutes on Password entry |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..99 |
|
wfTelnetCommandTimeOut |
1.3.6.1.4.1.18.3.5.3.7.1.8 |
Time out in minutes to Disconnect when at the command prompt |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..99 |
|
wfTelnetLoginRetries |
1.3.6.1.4.1.18.3.5.3.7.1.9 |
Limit # of login attempts then Disconnect |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..99 |
|
wfTelnetTotalLogins |
1.3.6.1.4.1.18.3.5.3.7.1.10 |
Total number of Telnet TI login attempts |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wfTelnetUserLoginErrors |
1.3.6.1.4.1.18.3.5.3.7.1.11 |
Total number of FAILED User login attempts |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter |
|
|
wfTelnetActiveSessions |
1.3.6.1.4.1.18.3.5.3.7.1.14 |
Total number of Telnet TI Sessions |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
wfTelnetDiagnosticReport |
1.3.6.1.4.1.18.3.5.3.7.1.15 |
Diagnostic Flag: report prints the options
information, plus some additional information about
what processing is going on |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetDiagnosticExercise |
1.3.6.1.4.1.18.3.5.3.7.1.16 |
Diagnostic Flag: Not implemented yet. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetDiagnosticNetworkData |
1.3.6.1.4.1.18.3.5.3.7.1.17 |
Diagnostic Flag: NETDATA displays the data
stream received by telnetd |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetDiagnosticPtyData |
1.3.6.1.4.1.18.3.5.3.7.1.18 |
Diagnostic Flag: PTYDATA displays data written to the pty |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetDiagnosticOptions |
1.3.6.1.4.1.18.3.5.3.7.1.19 |
Diagnostic Flag: OPTIONS prints information about
the negotiation of TELNET options |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetUserAbortLogoutDisable |
1.3.6.1.4.1.18.3.5.3.7.1.23 |
a USER from escaping out of the User Autoscript |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetHistoryDepth |
1.3.6.1.4.1.18.3.5.3.7.1.24 |
TI command history table size |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..40 |
|
wfTelnetReverseEnable |
1.3.6.1.4.1.18.3.5.3.7.1.25 |
Reverse Telnet enabled |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
wfTelnetReversePort |
1.3.6.1.4.1.18.3.5.3.7.1.26 |
Console port to use for reverse telnet |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..2 |
|