WebGraph-Thermometer-US-MIB

File: WebGraph-Thermometer-US-MIB.mib (67385 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
PhysAddress	enterprises	TimeTicks
IpAddress	NetworkAddress

Defined Types

WtWebioAn1GraphSensorEntry
SEQUENCE
	wtWebioAn1GraphSensorNo	INTEGER

WtWebioAn1GraphTempValueEntry
SEQUENCE
	wtWebioAn1GraphTempValue	OCTET STRING

WtWebioAn1GraphBinaryTempValueEntry
SEQUENCE
	wtWebioAn1GraphBinaryTempValue	INTEGER

WtWebioAn1GraphSensorColorEntry
SEQUENCE
	wtWebioAn1GraphSensorColor	OCTET STRING

WtWebioAn1GraphAlarmIfEntry
SEQUENCE
	wtWebioAn1GraphAlarmNo	INTEGER

WtWebioAn1GraphAlarmEntry
SEQUENCE
	wtWebioAn1GraphAlarmTrigger	OCTET STRING
	wtWebioAn1GraphAlarmMin	OCTET STRING
	wtWebioAn1GraphAlarmMax	OCTET STRING
	wtWebioAn1GraphAlarmHysteresis	OCTET STRING
	wtWebioAn1GraphAlarmDelay	OCTET STRING
	wtWebioAn1GraphAlarmInterval	OCTET STRING
	wtWebioAn1GraphAlarmEnable	OCTET STRING
	wtWebioAn1GraphAlarmEMailAddr	OCTET STRING
	wtWebioAn1GraphAlarmMailSubject	OCTET STRING
	wtWebioAn1GraphAlarmMailText	OCTET STRING
	wtWebioAn1GraphAlarmManagerIP	OCTET STRING
	wtWebioAn1GraphAlarmTrapText	OCTET STRING
	wtWebioAn1GraphAlarmMailOptions	OCTET STRING
	wtWebioAn1GraphAlarmTcpIpAddr	OCTET STRING
	wtWebioAn1GraphAlarmTcpPort	INTEGER
	wtWebioAn1GraphAlarmTcpText	OCTET STRING
	wtWebioAn1GraphAlarmClearMailSubject	OCTET STRING
	wtWebioAn1GraphAlarmClearMailText	OCTET STRING
	wtWebioAn1GraphAlarmClearTrapText	OCTET STRING
	wtWebioAn1GraphAlarmClearTcpText	OCTET STRING
	wtWebioAn1GraphAlarmSyslogIpAddr	OCTET STRING
	wtWebioAn1GraphAlarmSyslogPort	INTEGER
	wtWebioAn1GraphAlarmSyslogText	OCTET STRING
	wtWebioAn1GraphAlarmFtpDataPort	OCTET STRING
	wtWebioAn1GraphAlarmFtpFileName	OCTET STRING
	wtWebioAn1GraphAlarmFtpText	OCTET STRING
	wtWebioAn1GraphAlarmFtpClearText	OCTET STRING
	wtWebioAn1GraphAlarmFtpOption	OCTET STRING
	wtWebioAn1GraphAlarmTimerCron	OCTET STRING

WtWebioAn1GraphPortEntry
SEQUENCE
	wtWebioAn1GraphPortName	OCTET STRING
	wtWebioAn1GraphPortText	OCTET STRING
	wtWebioAn1GraphPortOffset1	OCTET STRING
	wtWebioAn1GraphPortTemperature1	OCTET STRING
	wtWebioAn1GraphPortOffset2	OCTET STRING
	wtWebioAn1GraphPortTemperature2	OCTET STRING
	wtWebioAn1GraphPortComment	OCTET STRING

Defined Values

wut		1.3.6.1.4.1.5040
OBJECT IDENTIFIER

wtComServer		1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER

wtWebio		1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER

wtWebioAn1Graph		1.3.6.1.4.1.5040.1.2.8
OBJECT IDENTIFIER

wtWebioAn1GraphTemp		1.3.6.1.4.1.5040.1.2.8.1
OBJECT IDENTIFIER

wtWebioAn1GraphSessCntrl		1.3.6.1.4.1.5040.1.2.8.2
OBJECT IDENTIFIER

wtWebioAn1GraphConfig		1.3.6.1.4.1.5040.1.2.8.3
OBJECT IDENTIFIER

wtWebioAn1GraphDevice		1.3.6.1.4.1.5040.1.2.8.3.1
OBJECT IDENTIFIER

wtWebioAn1GraphPorts		1.3.6.1.4.1.5040.1.2.8.3.2
OBJECT IDENTIFIER

wtWebioAn1GraphManufact		1.3.6.1.4.1.5040.1.2.8.3.3
OBJECT IDENTIFIER

wtWebioAn1GraphDiag		1.3.6.1.4.1.5040.1.2.8.3.4
OBJECT IDENTIFIER

wtWebioAn1GraphText		1.3.6.1.4.1.5040.1.2.8.3.1.1
OBJECT IDENTIFIER

wtWebioAn1GraphTimeDate		1.3.6.1.4.1.5040.1.2.8.3.1.2
OBJECT IDENTIFIER

wtWebioAn1GraphBasic		1.3.6.1.4.1.5040.1.2.8.3.1.3
OBJECT IDENTIFIER

wtWebioAn1GraphDatalogger		1.3.6.1.4.1.5040.1.2.8.3.1.4
OBJECT IDENTIFIER

wtWebioAn1GraphAlarm		1.3.6.1.4.1.5040.1.2.8.3.1.5
OBJECT IDENTIFIER

wtWebioAn1GraphTimeZone		1.3.6.1.4.1.5040.1.2.8.3.1.2.1
OBJECT IDENTIFIER

wtWebioAn1GraphTimeServer		1.3.6.1.4.1.5040.1.2.8.3.1.2.2
OBJECT IDENTIFIER

wtWebioAn1GraphDeviceClock		1.3.6.1.4.1.5040.1.2.8.3.1.2.3
OBJECT IDENTIFIER

wtWebioAn1GraphNetwork		1.3.6.1.4.1.5040.1.2.8.3.1.3.1
OBJECT IDENTIFIER

wtWebioAn1GraphHTML		1.3.6.1.4.1.5040.1.2.8.3.1.3.2
OBJECT IDENTIFIER

wtWebioAn1GraphMail		1.3.6.1.4.1.5040.1.2.8.3.1.3.3
OBJECT IDENTIFIER

wtWebioAn1GraphSNMP		1.3.6.1.4.1.5040.1.2.8.3.1.3.4
OBJECT IDENTIFIER

wtWebioAn1GraphUDP		1.3.6.1.4.1.5040.1.2.8.3.1.3.5
OBJECT IDENTIFIER

wtWebioAn1GraphSyslog		1.3.6.1.4.1.5040.1.2.8.3.1.3.6
OBJECT IDENTIFIER

wtWebioAn1GraphFTP		1.3.6.1.4.1.5040.1.2.8.3.1.3.7
OBJECT IDENTIFIER

wtWebioAn1GraphHTTP		1.3.6.1.4.1.5040.1.2.8.3.1.3.8
OBJECT IDENTIFIER

wtWebioAn1GraphSensors		1.3.6.1.4.1.5040.1.2.8.1.1
Number of temperature sensors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn1GraphSensorTable		1.3.6.1.4.1.5040.1.2.8.1.2
List of sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphSensorEntry

wtWebioAn1GraphSensorEntry		1.3.6.1.4.1.5040.1.2.8.1.2.1
Temperature sensor numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphSensorEntry

wtWebioAn1GraphSensorNo		1.3.6.1.4.1.5040.1.2.8.1.2.1.1
Temperature sensor number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1

wtWebioAn1GraphTempValueTable		1.3.6.1.4.1.5040.1.2.8.1.3
List of temperature values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphTempValueEntry

wtWebioAn1GraphTempValueEntry		1.3.6.1.4.1.5040.1.2.8.1.3.1
Temperatures of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphTempValueEntry

wtWebioAn1GraphTempValue		1.3.6.1.4.1.5040.1.2.8.1.3.1.1
Temperature value of the sensor, ASCII, 5 characters in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebioAn1GraphBinaryTempValueTable		1.3.6.1.4.1.5040.1.2.8.1.4
List of binary temperature values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphBinaryTempValueEntry

wtWebioAn1GraphBinaryTempValueEntry		1.3.6.1.4.1.5040.1.2.8.1.4.1
Binary temperature values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphBinaryTempValueEntry

wtWebioAn1GraphBinaryTempValue		1.3.6.1.4.1.5040.1.2.8.1.4.1.1
Binary temperature value of the sensor in 1/10 degrees Celsius, signed number, 0x7FFF indicates an invalid measured value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphSessCntrlPassword		1.3.6.1.4.1.5040.1.2.8.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebioAn1GraphSessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSessCntrlConfigMode		1.3.6.1.4.1.5040.1.2.8.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphSessCntrl-NoSession(0), wtWebioAn1GraphSessCntrl-Session(1)

wtWebioAn1GraphSessCntrlLogout		1.3.6.1.4.1.5040.1.2.8.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphSessCntrlAdminPassword		1.3.6.1.4.1.5040.1.2.8.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSessCntrlConfigPassword		1.3.6.1.4.1.5040.1.2.8.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDeviceName		1.3.6.1.4.1.5040.1.2.8.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDeviceText		1.3.6.1.4.1.5040.1.2.8.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDeviceLocation		1.3.6.1.4.1.5040.1.2.8.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDeviceContact		1.3.6.1.4.1.5040.1.2.8.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphTzOffsetHrs		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphTzOffsetMin		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphTzEnable		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphStTzOffsetHrs		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphStTzOffsetMin		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphStTzEnable		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphStTzStartMonth		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStartMonth-January(1), wtWebioAn1GraphStartMonth-February(2), wtWebioAn1GraphStartMonth-March(3), wtWebioAn1GraphStartMonth-April(4), wtWebioAn1GraphStartMonth-May(5), wtWebioAn1GraphStartMonth-June(6), wtWebioAn1GraphStartMonth-July(7), wtWebioAn1GraphStartMonth-August(8), wtWebioAn1GraphStartMonth-September(9), wtWebioAn1GraphStartMonth-October(10), wtWebioAn1GraphStartMonth-November(11), wtWebioAn1GraphStartMonth-December(12)

wtWebioAn1GraphStTzStartMode		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStartMode-first(1), wtWebioAn1GraphStartMode-second(2), wtWebioAn1GraphStartMode-third(3), wtWebioAn1GraphStartMode-fourth(4), wtWebioAn1GraphStartMode-last(5)

wtWebioAn1GraphStTzStartWday		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStartWday-Sunday(1), wtWebioAn1GraphStartWday-Monday(2), wtWebioAn1GraphStartWday-Tuesday(3), wtWebioAn1GraphStartWday-Thursday(4), wtWebioAn1GraphStartWday-Wednesday(5), wtWebioAn1GraphStartWday-Friday(6), wtWebioAn1GraphStartWday-Saturday(7)

wtWebioAn1GraphStTzStartHrs		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphStTzStartMin		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphStTzStopMonth		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStopMonth-January(1), wtWebioAn1GraphStopMonth-February(2), wtWebioAn1GraphStopMonth-March(3), wtWebioAn1GraphStopMonth-April(4), wtWebioAn1GraphStopMonth-May(5), wtWebioAn1GraphStopMonth-June(6), wtWebioAn1GraphStopMonth-July(7), wtWebioAn1GraphStopMonth-August(8), wtWebioAn1GraphStopMonth-September(9), wtWebioAn1GraphStopMonth-October(10), wtWebioAn1GraphStopMonth-November(11), wtWebioAn1GraphStopMonth-December(12)

wtWebioAn1GraphStTzStopMode		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStopMode-first(1), wtWebioAn1GraphStopMode-second(2), wtWebioAn1GraphStopMode-third(3), wtWebioAn1GraphStopMode-fourth(4), wtWebioAn1GraphStopMode-last(5)

wtWebioAn1GraphStTzStopWday		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphStopWday-Sunday(1), wtWebioAn1GraphStopWday-Monday(2), wtWebioAn1GraphStopWday-Tuesday(3), wtWebioAn1GraphStopWday-Thursday(4), wtWebioAn1GraphStopWday-Wednesday(5), wtWebioAn1GraphStopWday-Friday(6), wtWebioAn1GraphStopWday-Saturday(7)

wtWebioAn1GraphStTzStopHrs		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphStTzStopMin		1.3.6.1.4.1.5040.1.2.8.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphTimeServer1		1.3.6.1.4.1.5040.1.2.8.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphTimeServer2		1.3.6.1.4.1.5040.1.2.8.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphTsEnable		1.3.6.1.4.1.5040.1.2.8.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphTsSyncTime		1.3.6.1.4.1.5040.1.2.8.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphClockHrs		1.3.6.1.4.1.5040.1.2.8.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

wtWebioAn1GraphClockMin		1.3.6.1.4.1.5040.1.2.8.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..59

wtWebioAn1GraphClockDay		1.3.6.1.4.1.5040.1.2.8.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

wtWebioAn1GraphClockMonth		1.3.6.1.4.1.5040.1.2.8.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphClockMonth-January(1), wtWebioAn1GraphClockMonth-February(2), wtWebioAn1GraphClockMonth-March(3), wtWebioAn1GraphClockMonth-April(4), wtWebioAn1GraphClockMonth-May(5), wtWebioAn1GraphClockMonth-June(6), wtWebioAn1GraphClockMonth-July(7), wtWebioAn1GraphClockMonth-August(8), wtWebioAn1GraphClockMonth-September(9), wtWebioAn1GraphClockMonth-October(10), wtWebioAn1GraphClockMonth-November(11), wtWebioAn1GraphClockMonth-December(12)

wtWebioAn1GraphClockYear		1.3.6.1.4.1.5040.1.2.8.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wtWebioAn1GraphIpAddress		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.1
IP address of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn1GraphSubnetMask		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn1GraphGateway		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.3
Gateway of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn1GraphDnsServer1		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDnsServer2		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAddConfig		1.3.6.1.4.1.5040.1.2.8.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: BOOTP disable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphStartup		1.3.6.1.4.1.5040.1.2.8.3.1.3.8.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphGetHeaderEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.8.2
If this bit is set, every answer of a short form GET question will be lead by the IP-address and name of the device: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : GET Header enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphHttpPort		1.3.6.1.4.1.5040.1.2.8.3.1.3.8.3
Definition of the standard HTML port (Default: 80).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn1GraphMailAdName		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.1
Device name for mail administration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMailReply		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.2
Reply address for the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMailServer		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1MailEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMailAuthentication		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphMailAuthUser		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMailAuthPassword		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.7
Authentication password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMailPop3Server		1.3.6.1.4.1.5040.1.2.8.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSnmpCommunityStringRead		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.1
Community string read only
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSnmpCommunityStringReadWrite		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.2
Community string read / write
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSystemTrapManagerIP		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSystemTrapEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphSnmpEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSnmpCommunityStringTrap		1.3.6.1.4.1.5040.1.2.8.3.1.3.4.6
Community string of the traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphUdpPort		1.3.6.1.4.1.5040.1.2.8.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn1GraphUdpEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSyslogServerIP		1.3.6.1.4.1.5040.1.2.8.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphSyslogServerPort		1.3.6.1.4.1.5040.1.2.8.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphSyslogSystemMessagesEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphSyslogEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.6.4
Set bit 0 to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPServerIP		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPServerControlPort		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphFTPUserName		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPPassword		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPAccount		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPOption		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphFTPEnable		1.3.6.1.4.1.5040.1.2.8.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphLoggerTimebase		1.3.6.1.4.1.5040.1.2.8.3.1.4.1
Time base of the data logger
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphDatalogger-1Min(1), wtWebioAn1GraphDatalogger-5Min(2), wtWebioAn1GraphDatalogger-15Min(3), wtWebioAn1GraphDatalogger-60Min(4)

wtWebioAn1GraphLoggerSensorSel		1.3.6.1.4.1.5040.1.2.8.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphDisplaySensorSel		1.3.6.1.4.1.5040.1.2.8.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphSensorColorTable		1.3.6.1.4.1.5040.1.2.8.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphSensorColorEntry

wtWebioAn1GraphSensorColorEntry		1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphSensorColorEntry

wtWebioAn1GraphSensorColor		1.3.6.1.4.1.5040.1.2.8.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebioAn1GraphAutoScaleEnable		1.3.6.1.4.1.5040.1.2.8.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphVerticalUpperLimit		1.3.6.1.4.1.5040.1.2.8.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphVerticalLowerLimit		1.3.6.1.4.1.5040.1.2.8.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphHorizontalZoom		1.3.6.1.4.1.5040.1.2.8.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebioAn1GraphZoom-25min(1), wtWebioAn1GraphZoom-75min(2), wtWebioAn1GraphZoom-5hrs(3), wtWebioAn1GraphZoom-30hrs(4), wtWebioAn1GraphZoom-5days(5), wtWebioAn1GraphZoom-25days(6)

wtWebioAn1GraphAlarmCount		1.3.6.1.4.1.5040.1.2.8.3.1.5.1
Number of independent alarms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn1GraphAlarmIfTable		1.3.6.1.4.1.5040.1.2.8.3.1.5.2
List of alarm indices.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphAlarmIfEntry

wtWebioAn1GraphAlarmIfEntry		1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1
Numbers of the alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphAlarmIfEntry

wtWebioAn1GraphAlarmNo		1.3.6.1.4.1.5040.1.2.8.3.1.5.2.1.1
Alarm number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebioAn1GraphAlarmTable		1.3.6.1.4.1.5040.1.2.8.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphAlarmEntry

wtWebioAn1GraphAlarmEntry		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphAlarmEntry

wtWebioAn1GraphAlarmTrigger		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphAlarmMin		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.2
Minimum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmMax		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.3
Maximum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmHysteresis		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.4
Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmDelay		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmInterval		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmEnable		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphAlarmEMailAddr		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmMailSubject		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmMailText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmManagerIP		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmTrapText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmMailOptions		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphAlarmTcpIpAddr		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmTcpPort		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn1GraphAlarmTcpText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmClearMailSubject		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmClearMailText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmClearTrapText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmClearTcpText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmSyslogIpAddr		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.21
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebioAn1GraphAlarmSyslogPort		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.22
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebioAn1GraphAlarmSyslogText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.23
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmSyslogClearText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.24
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmFtpDataPort		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.25
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmFtpFileName		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.26
Name of the file including path informations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmFtpText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.27
Message text to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmFtpClearText		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.28
Alarm clear message to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphAlarmFtpOptions		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.29
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebioAn1GraphAlarmTimerCron		1.3.6.1.4.1.5040.1.2.8.3.1.5.3.1.30
This entry contains 5 text fields space or tab seperated for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separately. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortTable		1.3.6.1.4.1.5040.1.2.8.3.2.1
List of settings depending on the sensor number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebioAn1GraphPortEntry

wtWebioAn1GraphPortEntry		1.3.6.1.4.1.5040.1.2.8.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebioAn1GraphPortEntry

wtWebioAn1GraphPortName		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.1
Name of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortText		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.2
Description of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortOffset1		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortTemperature1		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.4
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortOffset2		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 2 decimal places at temperature 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortTemperature2		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.6
Offset calibration: Reference temperature 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphPortComment		1.3.6.1.4.1.5040.1.2.8.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfName		1.3.6.1.4.1.5040.1.2.8.3.3.1
Manufacturer company name
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfAddr		1.3.6.1.4.1.5040.1.2.8.3.3.2
Manufacturer address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfHotline		1.3.6.1.4.1.5040.1.2.8.3.3.3
Manufacturer hotline.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfInternet		1.3.6.1.4.1.5040.1.2.8.3.3.4
Manufacturer Internet address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfDeviceTyp		1.3.6.1.4.1.5040.1.2.8.3.3.5
Manufacturer device name (model number).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphMfOrderNo		1.3.6.1.4.1.5040.1.2.8.3.3.6
Manufacturer part number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDiagErrorCount		1.3.6.1.4.1.5040.1.2.8.3.4.1
Number of entries in the error memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphDiagBinaryError		1.3.6.1.4.1.5040.1.2.8.3.4.2
Error causes coded bit-by-bit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDiagErrorIndex		1.3.6.1.4.1.5040.1.2.8.3.4.3
The value of this variable is used as an index to read an error massege from wtWebioAn1GraphDiagErrorMessage. Errors are numbered from 1 to wtWebioAn1GraphDiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebioAn1GraphDiagErrorMessage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphDiagErrorMessage		1.3.6.1.4.1.5040.1.2.8.3.4.4
Using wtWebioAn1GraphDiagErrorIndex as an index, the appropriate message is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebioAn1GraphDiagErrorClear		1.3.6.1.4.1.5040.1.2.8.3.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

wtWebioAn1GraphAlert1		31
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert2		32
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert3		33
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert4		34
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert5		35
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert6		36
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert7		37
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert8		38
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert9		91
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert10		92
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert11		93
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert12		94
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert13		95
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert14		96
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert15		97
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlert16		98
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebioAn1GraphAlertDiag		110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE