WebGraph-AnalogIn-57644-US-MIB

File: WebGraph-AnalogIn-57644-US-MIB.mib (84477 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
PhysAddress	enterprises	TimeTicks
IpAddress	NetworkAddress

Defined Types

WtWebGraphAnalogIn57644SensorEntry
SEQUENCE
	wtWebGraphAnalogIn57644SensorNo	INTEGER

WtWebGraphAnalogIn57644ValuesEntry
SEQUENCE
	wtWebGraphAnalogIn57644Values	OCTET STRING

WtWebGraphAnalogIn57644BinaryValuesEntry
SEQUENCE
	wtWebGraphAnalogIn57644BinaryValues	INTEGER

WtWebGraphAnalogIn57644SensorColorEntry
SEQUENCE
	wtWebGraphAnalogIn57644SensorColor	OCTET STRING

WtWebGraphAnalogIn57644AlarmIfEntry
SEQUENCE
	wtWebGraphAnalogIn57644AlarmNo	INTEGER

WtWebGraphAnalogIn57644AlarmEntry
SEQUENCE
	wtWebGraphAnalogIn57644AlarmTrigger	OCTET STRING
	wtWebGraphAnalogIn57644AlarmMin	OCTET STRING
	wtWebGraphAnalogIn57644AlarmMax	OCTET STRING
	wtWebGraphAnalogIn57644AlarmHysteresis	OCTET STRING
	wtWebGraphAnalogIn57644AlarmDelay	OCTET STRING
	wtWebGraphAnalogIn57644AlarmInterval	OCTET STRING
	wtWebGraphAnalogIn57644AlarmEnable	OCTET STRING
	wtWebGraphAnalogIn57644AlarmEMailAddr	OCTET STRING
	wtWebGraphAnalogIn57644AlarmMailSubject	OCTET STRING
	wtWebGraphAnalogIn57644AlarmMailText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmManagerIP	OCTET STRING
	wtWebGraphAnalogIn57644AlarmTrapText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmMailOptions	OCTET STRING
	wtWebGraphAnalogIn57644AlarmTcpIpAddr	OCTET STRING
	wtWebGraphAnalogIn57644AlarmTcpPort	INTEGER
	wtWebGraphAnalogIn57644AlarmTcpText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmClearMailSubject	OCTET STRING
	wtWebGraphAnalogIn57644AlarmClearMailText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmClearTrapText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmClearTcpText	OCTET STRING
	wtWebGraphAnalogIn57644Alarm2Min	OCTET STRING
	wtWebGraphAnalogIn57644Alarm2Max	OCTET STRING
	wtWebGraphAnalogIn57644Alarm2Hysteresis	OCTET STRING
	wtWebGraphAnalogIn57644AlarmSyslogIpAddr	OCTET STRING
	wtWebGraphAnalogIn57644AlarmSyslogPort	INTEGER
	wtWebGraphAnalogIn57644AlarmSyslogText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmSyslogClearText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmFtpDataPort	OCTET STRING
	wtWebGraphAnalogIn57644AlarmFtpFileName	OCTET STRING
	wtWebGraphAnalogIn57644AlarmFtpText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmFtpClearText	OCTET STRING
	wtWebGraphAnalogIn57644AlarmFtpOption	OCTET STRING
	wtWebGraphAnalogIn57644AlarmTimerCron	OCTET STRING

WtWebGraphAnalogIn57644SensorColor2Entry
SEQUENCE
	wtWebGraphAnalogIn57644GraphicsSensorColor	OCTET STRING
	wtWebGraphAnalogIn57644GraphicsSelectScale	OCTET STRING

WtWebGraphAnalogIn57644PortEntry
SEQUENCE
	wtWebGraphAnalogIn57644PortName	OCTET STRING
	wtWebGraphAnalogIn57644PortText	OCTET STRING
	wtWebGraphAnalogIn57644PortOffset1	OCTET STRING
	wtWebGraphAnalogIn57644SetPoint1	OCTET STRING
	wtWebGraphAnalogIn57644PortOffset2	OCTET STRING
	wtWebGraphAnalogIn57644SetPoint2	OCTET STRING
	wtWebGraphAnalogIn57644PortComment	OCTET STRING
	wtWebGraphAnalogIn57644PortSensorSelect	OCTET STRING
	wtWebGraphAnalogIn57644PortUnit	OCTET STRING
	wtWebGraphAnalogIn57644PortScale0	OCTET STRING
	wtWebGraphAnalogIn57644PortScale100	OCTET STRING

Defined Values

wut		1.3.6.1.4.1.5040
OBJECT IDENTIFIER

wtComServer		1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER

wtWebio		1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644		1.3.6.1.4.1.5040.1.2.12
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Inventory		1.3.6.1.4.1.5040.1.2.12.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644SessCntrl		1.3.6.1.4.1.5040.1.2.12.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Config		1.3.6.1.4.1.5040.1.2.12.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Diag		1.3.6.1.4.1.5040.1.2.12.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Device		1.3.6.1.4.1.5040.1.2.12.3.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Ports		1.3.6.1.4.1.5040.1.2.12.3.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Manufact		1.3.6.1.4.1.5040.1.2.12.3.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Text		1.3.6.1.4.1.5040.1.2.12.3.1.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644TimeDate		1.3.6.1.4.1.5040.1.2.12.3.1.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Basic		1.3.6.1.4.1.5040.1.2.12.3.1.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Datalogger		1.3.6.1.4.1.5040.1.2.12.3.1.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Alarm		1.3.6.1.4.1.5040.1.2.12.3.1.5
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Graphics		1.3.6.1.4.1.5040.1.2.12.3.1.6
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644TimeZone		1.3.6.1.4.1.5040.1.2.12.3.1.2.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644TimeServer		1.3.6.1.4.1.5040.1.2.12.3.1.2.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644DeviceClock		1.3.6.1.4.1.5040.1.2.12.3.1.2.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Network		1.3.6.1.4.1.5040.1.2.12.3.1.3.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644HTTP		1.3.6.1.4.1.5040.1.2.12.3.1.3.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Mail		1.3.6.1.4.1.5040.1.2.12.3.1.3.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644SNMP		1.3.6.1.4.1.5040.1.2.12.3.1.3.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644UDP		1.3.6.1.4.1.5040.1.2.12.3.1.3.5
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Syslog		1.3.6.1.4.1.5040.1.2.12.3.1.3.6
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644FTP		1.3.6.1.4.1.5040.1.2.12.3.1.3.7
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644GraphicsBase		1.3.6.1.4.1.5040.1.2.12.3.1.6.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644GraphicsSelect		1.3.6.1.4.1.5040.1.2.12.3.1.6.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644GraphicsScale		1.3.6.1.4.1.5040.1.2.12.3.1.6.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57644Sensors		1.3.6.1.4.1.5040.1.2.12.1.1
Number of sensors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphAnalogIn57644SensorTable		1.3.6.1.4.1.5040.1.2.12.1.2
List of sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644SensorEntry

wtWebGraphAnalogIn57644SensorEntry		1.3.6.1.4.1.5040.1.2.12.1.2.1
List of sensor numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644SensorEntry

wtWebGraphAnalogIn57644SensorNo		1.3.6.1.4.1.5040.1.2.12.1.2.1.1
Sensor number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphAnalogIn57644ValuesTable		1.3.6.1.4.1.5040.1.2.12.1.3
List of measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644ValuesEntry

wtWebGraphAnalogIn57644ValuesEntry		1.3.6.1.4.1.5040.1.2.12.1.3.1
Measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644ValuesEntry

wtWebGraphAnalogIn57644Values		1.3.6.1.4.1.5040.1.2.12.1.3.1.1
Measurement value of the sensor, ASCII, 7 characters in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebGraphAnalogIn57644BinaryValuesTable		1.3.6.1.4.1.5040.1.2.12.1.4
List of binary measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644BinaryValuesEntry

wtWebGraphAnalogIn57644BinaryValuesEntry		1.3.6.1.4.1.5040.1.2.12.1.4.1
Binary measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644BinaryValuesEntry

wtWebGraphAnalogIn57644BinaryValues		1.3.6.1.4.1.5040.1.2.12.1.4.1.1
Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644SessCntrlPassword		1.3.6.1.4.1.5040.1.2.12.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57644SessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SessCntrlConfigMode		1.3.6.1.4.1.5040.1.2.12.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644SessCntrl-NoSession(0), wtWebGraphAnalogIn57644SessCntrl-Session(1)

wtWebGraphAnalogIn57644SessCntrlLogout		1.3.6.1.4.1.5040.1.2.12.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644SessCntrlAdminPassword		1.3.6.1.4.1.5040.1.2.12.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SessCntrlConfigPassword		1.3.6.1.4.1.5040.1.2.12.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DeviceName		1.3.6.1.4.1.5040.1.2.12.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DeviceText		1.3.6.1.4.1.5040.1.2.12.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DeviceLocation		1.3.6.1.4.1.5040.1.2.12.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DeviceContact		1.3.6.1.4.1.5040.1.2.12.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644TzOffsetHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644TzOffsetMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644TzEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644StTzOffsetHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644StTzOffsetMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644StTzEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644StTzStartMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StartMonth-January(1), wtWebGraphAnalogIn57644StartMonth-February(2), wtWebGraphAnalogIn57644StartMonth-March(3), wtWebGraphAnalogIn57644StartMonth-April(4), wtWebGraphAnalogIn57644StartMonth-May(5), wtWebGraphAnalogIn57644StartMonth-June(6), wtWebGraphAnalogIn57644StartMonth-July(7), wtWebGraphAnalogIn57644StartMonth-August(8), wtWebGraphAnalogIn57644StartMonth-September(9), wtWebGraphAnalogIn57644StartMonth-October(10), wtWebGraphAnalogIn57644StartMonth-November(11), wtWebGraphAnalogIn57644StartMonth-December(12)

wtWebGraphAnalogIn57644StTzStartMode		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StartMode-first(1), wtWebGraphAnalogIn57644StartMode-second(2), wtWebGraphAnalogIn57644StartMode-third(3), wtWebGraphAnalogIn57644StartMode-fourth(4), wtWebGraphAnalogIn57644StartMode-last(5)

wtWebGraphAnalogIn57644StTzStartWday		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StartWday-Sunday(1), wtWebGraphAnalogIn57644StartWday-Monday(2), wtWebGraphAnalogIn57644StartWday-Tuesday(3), wtWebGraphAnalogIn57644StartWday-Thursday(4), wtWebGraphAnalogIn57644StartWday-Wednesday(5), wtWebGraphAnalogIn57644StartWday-Friday(6), wtWebGraphAnalogIn57644StartWday-Saturday(7)

wtWebGraphAnalogIn57644StTzStartHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644StTzStartMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644StTzStopMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StopMonth-January(1), wtWebGraphAnalogIn57644StopMonth-February(2), wtWebGraphAnalogIn57644StopMonth-March(3), wtWebGraphAnalogIn57644StopMonth-April(4), wtWebGraphAnalogIn57644StopMonth-May(5), wtWebGraphAnalogIn57644StopMonth-June(6), wtWebGraphAnalogIn57644StopMonth-July(7), wtWebGraphAnalogIn57644StopMonth-August(8), wtWebGraphAnalogIn57644StopMonth-September(9), wtWebGraphAnalogIn57644StopMonth-October(10), wtWebGraphAnalogIn57644StopMonth-November(11), wtWebGraphAnalogIn57644StopMonth-December(12)

wtWebGraphAnalogIn57644StTzStopMode		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StopMode-first(1), wtWebGraphAnalogIn57644StopMode-second(2), wtWebGraphAnalogIn57644StopMode-third(3), wtWebGraphAnalogIn57644StopMode-fourth(4), wtWebGraphAnalogIn57644StopMode-last(5)

wtWebGraphAnalogIn57644StTzStopWday		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644StopWday-Sunday(1), wtWebGraphAnalogIn57644StopWday-Monday(2), wtWebGraphAnalogIn57644StopWday-Tuesday(3), wtWebGraphAnalogIn57644StopWday-Thursday(4), wtWebGraphAnalogIn57644StopWday-Wednesday(5), wtWebGraphAnalogIn57644StopWday-Friday(6), wtWebGraphAnalogIn57644StopWday-Saturday(7)

wtWebGraphAnalogIn57644StTzStopHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644StTzStopMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644TimeServer1		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644TimeServer2		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644TsEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644TsSyncTime		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644ClockHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

wtWebGraphAnalogIn57644ClockMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..59

wtWebGraphAnalogIn57644ClockDay		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

wtWebGraphAnalogIn57644ClockMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644ClockMonth-January(1), wtWebGraphAnalogIn57644ClockMonth-February(2), wtWebGraphAnalogIn57644ClockMonth-March(3), wtWebGraphAnalogIn57644ClockMonth-April(4), wtWebGraphAnalogIn57644ClockMonth-May(5), wtWebGraphAnalogIn57644ClockMonth-June(6), wtWebGraphAnalogIn57644ClockMonth-July(7), wtWebGraphAnalogIn57644ClockMonth-August(8), wtWebGraphAnalogIn57644ClockMonth-September(9), wtWebGraphAnalogIn57644ClockMonth-October(10), wtWebGraphAnalogIn57644ClockMonth-November(11), wtWebGraphAnalogIn57644ClockMonth-December(12)

wtWebGraphAnalogIn57644ClockYear		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wtWebGraphAnalogIn57644IpAddress		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.1
IP address of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57644SubnetMask		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57644Gateway		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.3
Gateway of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57644DnsServer1		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DnsServer2		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AddConfig		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644Startup		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GetHeaderEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.2
If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644HttpPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.3
Definition of the standard HTML port (Default: 80).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57644MailAdName		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.1
Device name for mail administration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MailReply		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.2
Reply address for the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MailServer		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1MailEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MailAuthentication		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644MailAuthUser		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MailAuthPassword		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.7
Authentication password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MailPop3Server		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SnmpCommunityStringRead		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.1
Community string read only
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SnmpCommunityStringReadWrite		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.2
Community string read / write
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SystemTrapManagerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SystemTrapEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644SnmpEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SnmpCommunityStringTrap		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.6
Community string send within traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644UdpPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57644UdpEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SyslogServerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SyslogServerPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644SyslogSystemMessagesEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644SyslogEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.4
Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPServerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPServerControlPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644FTPUserName		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPPassword		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPAccount		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPOption		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644FTPEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644LoggerTimebase		1.3.6.1.4.1.5040.1.2.12.3.1.4.1
Time base of the data logger
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644Datalogger-1Min(1), wtWebGraphAnalogIn57644Datalogger-5Min(2), wtWebGraphAnalogIn57644Datalogger-15Min(3), wtWebGraphAnalogIn57644Datalogger-60Min(4)

wtWebGraphAnalogIn57644LoggerSensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644DisplaySensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644SensorColorTable		1.3.6.1.4.1.5040.1.2.12.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644SensorColorEntry

wtWebGraphAnalogIn57644SensorColorEntry		1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644SensorColorEntry

wtWebGraphAnalogIn57644SensorColor		1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57644AutoScaleEnable		1.3.6.1.4.1.5040.1.2.12.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644VerticalUpperLimit		1.3.6.1.4.1.5040.1.2.12.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644VerticalLowerLimit		1.3.6.1.4.1.5040.1.2.12.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644HorizontalZoom		1.3.6.1.4.1.5040.1.2.12.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57644Zoom-25min(1), wtWebGraphAnalogIn57644Zoom-75min(2), wtWebGraphAnalogIn57644Zoom-5hrs(3), wtWebGraphAnalogIn57644Zoom-30hrs(4), wtWebGraphAnalogIn57644Zoom-5days(5), wtWebGraphAnalogIn57644Zoom-25days(6)

wtWebGraphAnalogIn57644AlarmCount		1.3.6.1.4.1.5040.1.2.12.3.1.5.1
Number of independent alarms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphAnalogIn57644AlarmIfTable		1.3.6.1.4.1.5040.1.2.12.3.1.5.2
List of alarm indices.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644AlarmIfEntry

wtWebGraphAnalogIn57644AlarmIfEntry		1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1
Numbers of the alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644AlarmIfEntry

wtWebGraphAnalogIn57644AlarmNo		1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1.1
Alarm number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphAnalogIn57644AlarmTable		1.3.6.1.4.1.5040.1.2.12.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644AlarmEntry

wtWebGraphAnalogIn57644AlarmEntry		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644AlarmEntry

wtWebGraphAnalogIn57644AlarmTrigger		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644AlarmMin		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.2
Minimum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmMax		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.3
Maximum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmHysteresis		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.4
Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmDelay		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmInterval		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmEnable		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644AlarmEMailAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmMailSubject		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmMailText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmManagerIP		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmTrapText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmMailOptions		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644AlarmTcpIpAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmTcpPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57644AlarmTcpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmClearMailSubject		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmClearMailText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmClearTrapText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmClearTcpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644Alarm2Min		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.21
Minimum rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644Alarm2Max		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.22
Maximum rel.Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644Alarm2Hysteresis		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.23
Hysterese rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmSyslogIpAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.24
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmSyslogPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.25
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57644AlarmSyslogText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.26
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmSyslogClearText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.27
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmFtpDataPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.28
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmFtpFileName		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.29
Name of the file including path informations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmFtpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.30
Message text to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmFtpClearText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.31
Alarm clear message to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644AlarmFtpOption		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.32
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644AlarmTimerCron		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.33
This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsBaseEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.1
Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsBaseWidth		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.2
Defines the width of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsBaseHeight		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.3
Defines the height of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsBaseFrameColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.4
Frame color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57644GraphicsBaseBackgroundColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.5
Background color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57644GraphicsBasePollingrate		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.6
Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsSelectDisplaySensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644GraphicsSelectDisplayShowExtrem		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.2
Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644SensorColor2Table		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644SensorColor2Entry

wtWebGraphAnalogIn57644SensorColor2Entry		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1
Numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644SensorColor2Entry

wtWebGraphAnalogIn57644GraphicsSensorColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57644GraphicsSelectScale		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.2
Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScaleAutoScaleEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.1
Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScaleAutoFitEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.2
Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScale1Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.3
Scale 1: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale2Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.4
Scale 2: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale3Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.5
Scale 3: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale4Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.6
Scale 4: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale1Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.7
Scale 1: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale2Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.8
Scale 2: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale3Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.9
Scale 3: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale4Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.10
Scale 4: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644GraphicsScale1Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.11
Scale 1: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScale2Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.12
Scale 2: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScale3Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.13
Scale 3: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644GraphicsScale4Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.14
Scale 4: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortTable		1.3.6.1.4.1.5040.1.2.12.3.2.1
List of settings depending on the sensor number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57644PortEntry

wtWebGraphAnalogIn57644PortEntry		1.3.6.1.4.1.5040.1.2.12.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57644PortEntry

wtWebGraphAnalogIn57644PortName		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.1
Name of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortText		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.2
Description of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortOffset1		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SetPoint1		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.4
Offset calibration: set point 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortOffset2		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644SetPoint2		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.6
Offset calibration: set point 2 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortComment		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortSensorSelect		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.8
Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57644PortUnit		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.9
User scale: displayed unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortScale0		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.10
User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644PortScale100		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.11
User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfName		1.3.6.1.4.1.5040.1.2.12.3.3.1
Manufacturer company name
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfAddr		1.3.6.1.4.1.5040.1.2.12.3.3.2
Manufacturer address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfHotline		1.3.6.1.4.1.5040.1.2.12.3.3.3
Manufacturer hotline.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfInternet		1.3.6.1.4.1.5040.1.2.12.3.3.4
Manufacturer Internet address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfDeviceTyp		1.3.6.1.4.1.5040.1.2.12.3.3.5
Manufacturer device name (model number).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644MfOrderNo		1.3.6.1.4.1.5040.1.2.12.3.3.6
Manufacturer part number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DiagErrorCount		1.3.6.1.4.1.5040.1.2.12.4.1
Number of entries in the error memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644DiagBinaryError		1.3.6.1.4.1.5040.1.2.12.4.2
Error causes coded bit-by-bit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DiagErrorIndex		1.3.6.1.4.1.5040.1.2.12.4.3
The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57644DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalogIn57644DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalogIn57644DiagErrorMessage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644DiagErrorMessage		1.3.6.1.4.1.5040.1.2.12.4.4
Using wtWebGraphAnalogIn57644DiagErrorIndex as an index, the appropriate message is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57644DiagErrorClear		1.3.6.1.4.1.5040.1.2.12.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57644Alert1		31
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert2		32
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert3		33
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert4		34
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert5		35
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert6		36
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert7		37
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert8		38
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert9		91
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert10		92
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert11		93
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert12		94
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert13		95
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert14		96
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert15		97
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644Alert16		98
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57644AlertDiag		110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE