WebGraph-AnalogIn-57643-US-MIB

File: WebGraph-AnalogIn-57643-US-MIB.mib (84476 bytes)

Imported modules

RFC-1212	RFC-1215	RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE	TRAP-TYPE	DisplayString
PhysAddress	enterprises	TimeTicks
IpAddress	NetworkAddress

Defined Types

WtWebGraphAnalogIn57643SensorEntry
SEQUENCE
	wtWebGraphAnalogIn57643SensorNo	INTEGER

WtWebGraphAnalogIn57643ValuesEntry
SEQUENCE
	wtWebGraphAnalogIn57643Values	OCTET STRING

WtWebGraphAnalogIn57643BinaryValuesEntry
SEQUENCE
	wtWebGraphAnalogIn57643BinaryValues	INTEGER

WtWebGraphAnalogIn57643SensorColorEntry
SEQUENCE
	wtWebGraphAnalogIn57643SensorColor	OCTET STRING

WtWebGraphAnalogIn57643AlarmIfEntry
SEQUENCE
	wtWebGraphAnalogIn57643AlarmNo	INTEGER

WtWebGraphAnalogIn57643AlarmEntry
SEQUENCE
	wtWebGraphAnalogIn57643AlarmTrigger	OCTET STRING
	wtWebGraphAnalogIn57643AlarmMin	OCTET STRING
	wtWebGraphAnalogIn57643AlarmMax	OCTET STRING
	wtWebGraphAnalogIn57643AlarmHysteresis	OCTET STRING
	wtWebGraphAnalogIn57643AlarmDelay	OCTET STRING
	wtWebGraphAnalogIn57643AlarmInterval	OCTET STRING
	wtWebGraphAnalogIn57643AlarmEnable	OCTET STRING
	wtWebGraphAnalogIn57643AlarmEMailAddr	OCTET STRING
	wtWebGraphAnalogIn57643AlarmMailSubject	OCTET STRING
	wtWebGraphAnalogIn57643AlarmMailText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmManagerIP	OCTET STRING
	wtWebGraphAnalogIn57643AlarmTrapText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmMailOptions	OCTET STRING
	wtWebGraphAnalogIn57643AlarmTcpIpAddr	OCTET STRING
	wtWebGraphAnalogIn57643AlarmTcpPort	INTEGER
	wtWebGraphAnalogIn57643AlarmTcpText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmClearMailSubject	OCTET STRING
	wtWebGraphAnalogIn57643AlarmClearMailText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmClearTrapText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmClearTcpText	OCTET STRING
	wtWebGraphAnalogIn57643Alarm2Min	OCTET STRING
	wtWebGraphAnalogIn57643Alarm2Max	OCTET STRING
	wtWebGraphAnalogIn57643Alarm2Hysteresis	OCTET STRING
	wtWebGraphAnalogIn57643AlarmSyslogIpAddr	OCTET STRING
	wtWebGraphAnalogIn57643AlarmSyslogPort	INTEGER
	wtWebGraphAnalogIn57643AlarmSyslogText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmSyslogClearText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmFtpDataPort	OCTET STRING
	wtWebGraphAnalogIn57643AlarmFtpFileName	OCTET STRING
	wtWebGraphAnalogIn57643AlarmFtpText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmFtpClearText	OCTET STRING
	wtWebGraphAnalogIn57643AlarmFtpOption	OCTET STRING
	wtWebGraphAnalogIn57643AlarmTimerCron	OCTET STRING

WtWebGraphAnalogIn57643SensorColor2Entry
SEQUENCE
	wtWebGraphAnalogIn57643GraphicsSensorColor	OCTET STRING
	wtWebGraphAnalogIn57643GraphicsSelectScale	OCTET STRING

WtWebGraphAnalogIn57643PortEntry
SEQUENCE
	wtWebGraphAnalogIn57643PortName	OCTET STRING
	wtWebGraphAnalogIn57643PortText	OCTET STRING
	wtWebGraphAnalogIn57643PortOffset1	OCTET STRING
	wtWebGraphAnalogIn57643SetPoint1	OCTET STRING
	wtWebGraphAnalogIn57643PortOffset2	OCTET STRING
	wtWebGraphAnalogIn57643SetPoint2	OCTET STRING
	wtWebGraphAnalogIn57643PortComment	OCTET STRING
	wtWebGraphAnalogIn57643PortSensorSelect	OCTET STRING
	wtWebGraphAnalogIn57643PortUnit	OCTET STRING
	wtWebGraphAnalogIn57643PortScale0	OCTET STRING
	wtWebGraphAnalogIn57643PortScale100	OCTET STRING

Defined Values

wut		1.3.6.1.4.1.5040
OBJECT IDENTIFIER

wtComServer		1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER

wtWebio		1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643		1.3.6.1.4.1.5040.1.2.12
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Inventory		1.3.6.1.4.1.5040.1.2.12.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643SessCntrl		1.3.6.1.4.1.5040.1.2.12.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Config		1.3.6.1.4.1.5040.1.2.12.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Diag		1.3.6.1.4.1.5040.1.2.12.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Device		1.3.6.1.4.1.5040.1.2.12.3.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Ports		1.3.6.1.4.1.5040.1.2.12.3.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Manufact		1.3.6.1.4.1.5040.1.2.12.3.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Text		1.3.6.1.4.1.5040.1.2.12.3.1.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643TimeDate		1.3.6.1.4.1.5040.1.2.12.3.1.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Basic		1.3.6.1.4.1.5040.1.2.12.3.1.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Datalogger		1.3.6.1.4.1.5040.1.2.12.3.1.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Alarm		1.3.6.1.4.1.5040.1.2.12.3.1.5
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Graphics		1.3.6.1.4.1.5040.1.2.12.3.1.6
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643TimeZone		1.3.6.1.4.1.5040.1.2.12.3.1.2.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643TimeServer		1.3.6.1.4.1.5040.1.2.12.3.1.2.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643DeviceClock		1.3.6.1.4.1.5040.1.2.12.3.1.2.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Network		1.3.6.1.4.1.5040.1.2.12.3.1.3.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643HTTP		1.3.6.1.4.1.5040.1.2.12.3.1.3.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Mail		1.3.6.1.4.1.5040.1.2.12.3.1.3.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643SNMP		1.3.6.1.4.1.5040.1.2.12.3.1.3.4
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643UDP		1.3.6.1.4.1.5040.1.2.12.3.1.3.5
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Syslog		1.3.6.1.4.1.5040.1.2.12.3.1.3.6
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643FTP		1.3.6.1.4.1.5040.1.2.12.3.1.3.7
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643GraphicsBase		1.3.6.1.4.1.5040.1.2.12.3.1.6.1
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643GraphicsSelect		1.3.6.1.4.1.5040.1.2.12.3.1.6.2
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643GraphicsScale		1.3.6.1.4.1.5040.1.2.12.3.1.6.3
OBJECT IDENTIFIER

wtWebGraphAnalogIn57643Sensors		1.3.6.1.4.1.5040.1.2.12.1.1
Number of sensors
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphAnalogIn57643SensorTable		1.3.6.1.4.1.5040.1.2.12.1.2
List of sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643SensorEntry

wtWebGraphAnalogIn57643SensorEntry		1.3.6.1.4.1.5040.1.2.12.1.2.1
List of sensor numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643SensorEntry

wtWebGraphAnalogIn57643SensorNo		1.3.6.1.4.1.5040.1.2.12.1.2.1.1
Sensor number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2

wtWebGraphAnalogIn57643ValuesTable		1.3.6.1.4.1.5040.1.2.12.1.3
List of measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643ValuesEntry

wtWebGraphAnalogIn57643ValuesEntry		1.3.6.1.4.1.5040.1.2.12.1.3.1
Measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643ValuesEntry

wtWebGraphAnalogIn57643Values		1.3.6.1.4.1.5040.1.2.12.1.3.1.1
Measurement value of the sensor, ASCII, 7 characters in length.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(5)

wtWebGraphAnalogIn57643BinaryValuesTable		1.3.6.1.4.1.5040.1.2.12.1.4
List of binary measurement values corresponding to the channel numbers.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643BinaryValuesEntry

wtWebGraphAnalogIn57643BinaryValuesEntry		1.3.6.1.4.1.5040.1.2.12.1.4.1
Binary measurement values of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643BinaryValuesEntry

wtWebGraphAnalogIn57643BinaryValues		1.3.6.1.4.1.5040.1.2.12.1.4.1.1
Binary measurement value of the sensor in 1/10 degrees Celsius or 1/10 per cent, signed number, 0x4FFF6 indicates an invalid measured value.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643SessCntrlPassword		1.3.6.1.4.1.5040.1.2.12.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalogIn57643SessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SessCntrlConfigMode		1.3.6.1.4.1.5040.1.2.12.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643SessCntrl-NoSession(0), wtWebGraphAnalogIn57643SessCntrl-Session(1)

wtWebGraphAnalogIn57643SessCntrlLogout		1.3.6.1.4.1.5040.1.2.12.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643SessCntrlAdminPassword		1.3.6.1.4.1.5040.1.2.12.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SessCntrlConfigPassword		1.3.6.1.4.1.5040.1.2.12.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DeviceName		1.3.6.1.4.1.5040.1.2.12.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DeviceText		1.3.6.1.4.1.5040.1.2.12.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DeviceLocation		1.3.6.1.4.1.5040.1.2.12.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DeviceContact		1.3.6.1.4.1.5040.1.2.12.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643TzOffsetHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643TzOffsetMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643TzEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643StTzOffsetHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643StTzOffsetMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643StTzEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643StTzStartMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StartMonth-January(1), wtWebGraphAnalogIn57643StartMonth-February(2), wtWebGraphAnalogIn57643StartMonth-March(3), wtWebGraphAnalogIn57643StartMonth-April(4), wtWebGraphAnalogIn57643StartMonth-May(5), wtWebGraphAnalogIn57643StartMonth-June(6), wtWebGraphAnalogIn57643StartMonth-July(7), wtWebGraphAnalogIn57643StartMonth-August(8), wtWebGraphAnalogIn57643StartMonth-September(9), wtWebGraphAnalogIn57643StartMonth-October(10), wtWebGraphAnalogIn57643StartMonth-November(11), wtWebGraphAnalogIn57643StartMonth-December(12)

wtWebGraphAnalogIn57643StTzStartMode		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StartMode-first(1), wtWebGraphAnalogIn57643StartMode-second(2), wtWebGraphAnalogIn57643StartMode-third(3), wtWebGraphAnalogIn57643StartMode-fourth(4), wtWebGraphAnalogIn57643StartMode-last(5)

wtWebGraphAnalogIn57643StTzStartWday		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StartWday-Sunday(1), wtWebGraphAnalogIn57643StartWday-Monday(2), wtWebGraphAnalogIn57643StartWday-Tuesday(3), wtWebGraphAnalogIn57643StartWday-Thursday(4), wtWebGraphAnalogIn57643StartWday-Wednesday(5), wtWebGraphAnalogIn57643StartWday-Friday(6), wtWebGraphAnalogIn57643StartWday-Saturday(7)

wtWebGraphAnalogIn57643StTzStartHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643StTzStartMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643StTzStopMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StopMonth-January(1), wtWebGraphAnalogIn57643StopMonth-February(2), wtWebGraphAnalogIn57643StopMonth-March(3), wtWebGraphAnalogIn57643StopMonth-April(4), wtWebGraphAnalogIn57643StopMonth-May(5), wtWebGraphAnalogIn57643StopMonth-June(6), wtWebGraphAnalogIn57643StopMonth-July(7), wtWebGraphAnalogIn57643StopMonth-August(8), wtWebGraphAnalogIn57643StopMonth-September(9), wtWebGraphAnalogIn57643StopMonth-October(10), wtWebGraphAnalogIn57643StopMonth-November(11), wtWebGraphAnalogIn57643StopMonth-December(12)

wtWebGraphAnalogIn57643StTzStopMode		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StopMode-first(1), wtWebGraphAnalogIn57643StopMode-second(2), wtWebGraphAnalogIn57643StopMode-third(3), wtWebGraphAnalogIn57643StopMode-fourth(4), wtWebGraphAnalogIn57643StopMode-last(5)

wtWebGraphAnalogIn57643StTzStopWday		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643StopWday-Sunday(1), wtWebGraphAnalogIn57643StopWday-Monday(2), wtWebGraphAnalogIn57643StopWday-Tuesday(3), wtWebGraphAnalogIn57643StopWday-Thursday(4), wtWebGraphAnalogIn57643StopWday-Wednesday(5), wtWebGraphAnalogIn57643StopWday-Friday(6), wtWebGraphAnalogIn57643StopWday-Saturday(7)

wtWebGraphAnalogIn57643StTzStopHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643StTzStopMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643TimeServer1		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643TimeServer2		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643TsEnable		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643TsSyncTime		1.3.6.1.4.1.5040.1.2.12.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643ClockHrs		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..23

wtWebGraphAnalogIn57643ClockMin		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..59

wtWebGraphAnalogIn57643ClockDay		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..31

wtWebGraphAnalogIn57643ClockMonth		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643ClockMonth-January(1), wtWebGraphAnalogIn57643ClockMonth-February(2), wtWebGraphAnalogIn57643ClockMonth-March(3), wtWebGraphAnalogIn57643ClockMonth-April(4), wtWebGraphAnalogIn57643ClockMonth-May(5), wtWebGraphAnalogIn57643ClockMonth-June(6), wtWebGraphAnalogIn57643ClockMonth-July(7), wtWebGraphAnalogIn57643ClockMonth-August(8), wtWebGraphAnalogIn57643ClockMonth-September(9), wtWebGraphAnalogIn57643ClockMonth-October(10), wtWebGraphAnalogIn57643ClockMonth-November(11), wtWebGraphAnalogIn57643ClockMonth-December(12)

wtWebGraphAnalogIn57643ClockYear		1.3.6.1.4.1.5040.1.2.12.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	0..65535

wtWebGraphAnalogIn57643IpAddress		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.1
IP address of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57643SubnetMask		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57643Gateway		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.3
Gateway of the Webio
Status: mandatory	Access: read-write
OBJECT-TYPE
	IpAddress

wtWebGraphAnalogIn57643DnsServer1		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DnsServer2		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AddConfig		1.3.6.1.4.1.5040.1.2.12.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643Startup		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GetHeaderEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.2
If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643HttpPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.2.3
Definition of the standard HTML port (Default: 80).
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57643MailAdName		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.1
Device name for mail administration.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MailReply		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.2
Reply address for the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MailServer		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebioAn1MailEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MailAuthentication		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643MailAuthUser		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MailAuthPassword		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.7
Authentication password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MailPop3Server		1.3.6.1.4.1.5040.1.2.12.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SnmpCommunityStringRead		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.1
Community string read only
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SnmpCommunityStringReadWrite		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.2
Community string read / write
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SystemTrapManagerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SystemTrapEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643SnmpEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SnmpCommunityStringTrap		1.3.6.1.4.1.5040.1.2.12.3.1.3.4.6
Community string send within traps.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643UdpPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57643UdpEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SyslogServerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SyslogServerPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643SyslogSystemMessagesEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643SyslogEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.6.4
Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPServerIP		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPServerControlPort		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643FTPUserName		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPPassword		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPAccount		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPOption		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643FTPEnable		1.3.6.1.4.1.5040.1.2.12.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643LoggerTimebase		1.3.6.1.4.1.5040.1.2.12.3.1.4.1
Time base of the data logger
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643Datalogger-1Min(1), wtWebGraphAnalogIn57643Datalogger-5Min(2), wtWebGraphAnalogIn57643Datalogger-15Min(3), wtWebGraphAnalogIn57643Datalogger-60Min(4)

wtWebGraphAnalogIn57643LoggerSensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643DisplaySensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643SensorColorTable		1.3.6.1.4.1.5040.1.2.12.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643SensorColorEntry

wtWebGraphAnalogIn57643SensorColorEntry		1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643SensorColorEntry

wtWebGraphAnalogIn57643SensorColor		1.3.6.1.4.1.5040.1.2.12.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57643AutoScaleEnable		1.3.6.1.4.1.5040.1.2.12.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643VerticalUpperLimit		1.3.6.1.4.1.5040.1.2.12.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643VerticalLowerLimit		1.3.6.1.4.1.5040.1.2.12.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643HorizontalZoom		1.3.6.1.4.1.5040.1.2.12.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	wtWebGraphAnalogIn57643Zoom-25min(1), wtWebGraphAnalogIn57643Zoom-75min(2), wtWebGraphAnalogIn57643Zoom-5hrs(3), wtWebGraphAnalogIn57643Zoom-30hrs(4), wtWebGraphAnalogIn57643Zoom-5days(5), wtWebGraphAnalogIn57643Zoom-25days(6)

wtWebGraphAnalogIn57643AlarmCount		1.3.6.1.4.1.5040.1.2.12.3.1.5.1
Number of independent alarms.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphAnalogIn57643AlarmIfTable		1.3.6.1.4.1.5040.1.2.12.3.1.5.2
List of alarm indices.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643AlarmIfEntry

wtWebGraphAnalogIn57643AlarmIfEntry		1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1
Numbers of the alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643AlarmIfEntry

wtWebGraphAnalogIn57643AlarmNo		1.3.6.1.4.1.5040.1.2.12.3.1.5.2.1.1
Alarm number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..8

wtWebGraphAnalogIn57643AlarmTable		1.3.6.1.4.1.5040.1.2.12.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643AlarmEntry

wtWebGraphAnalogIn57643AlarmEntry		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643AlarmEntry

wtWebGraphAnalogIn57643AlarmTrigger		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643AlarmMin		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.2
Minimum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmMax		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.3
Maximum temperature in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmHysteresis		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.4
Temperature changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) , in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmDelay		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmInterval		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmEnable		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643AlarmEMailAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmMailSubject		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmMailText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmManagerIP		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmTrapText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmMailOptions		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643AlarmTcpIpAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmTcpPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57643AlarmTcpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmClearMailSubject		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmClearMailText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..8. provides the current time.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmClearTrapText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmClearTcpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643Alarm2Min		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.21
Minimum rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643Alarm2Max		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.22
Maximum rel.Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643Alarm2Hysteresis		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.23
Hysterese rel. Humidity in percent with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmSyslogIpAddr		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.24
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmSyslogPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.25
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	1..65535

wtWebGraphAnalogIn57643AlarmSyslogText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.26
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmSyslogClearText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.27
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmFtpDataPort		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.28
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmFtpFileName		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.29
Name of the file including path informations.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmFtpText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.30
Message text to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmFtpClearText		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.31
Alarm clear message to store on the FTP server.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643AlarmFtpOption		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.32
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643AlarmTimerCron		1.3.6.1.4.1.5040.1.2.12.3.1.5.3.1.33
This entry contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger a message, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas - a partition within the allowed range (1-5) - step size within an partition of the allowed range (0-59/2: every second minute).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsBaseEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.1
Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsBaseWidth		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.2
Defines the width of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsBaseHeight		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.3
Defines the height of the graphic in pixels.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsBaseFrameColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.4
Frame color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57643GraphicsBaseBackgroundColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.5
Background color definition in RGB.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57643GraphicsBasePollingrate		1.3.6.1.4.1.5040.1.2.12.3.1.6.1.6
Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsSelectDisplaySensorSel		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.1
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643GraphicsSelectDisplayShowExtrem		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.2
Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2: Sensor 3 Bit 3: Sensor 4 Bit 4: Sensor 5 Bit 5: Sensor 6 Bit 6: Sensor 7 Bit 7: Sensor 8
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643SensorColor2Table		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3
List of sensor colors for the praphical presentation.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643SensorColor2Entry

wtWebGraphAnalogIn57643SensorColor2Entry		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1
Numbers of the sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643SensorColor2Entry

wtWebGraphAnalogIn57643GraphicsSensorColor		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.1
Color of the sensors at the praphical presention.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(3)

wtWebGraphAnalogIn57643GraphicsSelectScale		1.3.6.1.4.1.5040.1.2.12.3.1.6.2.3.1.2
Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2 : Use Scale 3 Bit 3 : Use Scale 4 Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScaleAutoScaleEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.1
Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2 : Scale 3 Auto scale enable Bit 3 : Scale 4 Auto scale enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScaleAutoFitEnable		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.2
Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2 : Scale 3 Auto fit enable Bit 3 : Scale 4 Auto fit enable Bit 4-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScale1Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.3
Scale 1: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale2Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.4
Scale 2: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale3Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.5
Scale 3: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale4Min		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.6
Scale 4: Minimum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale1Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.7
Scale 1: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale2Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.8
Scale 2: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale3Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.9
Scale 3: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale4Max		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.10
Scale 4: Maximum.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643GraphicsScale1Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.11
Scale 1: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScale2Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.12
Scale 2: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScale3Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.13
Scale 3: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643GraphicsScale4Unit		1.3.6.1.4.1.5040.1.2.12.3.1.6.3.14
Scale 4: Unit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortTable		1.3.6.1.4.1.5040.1.2.12.3.2.1
List of settings depending on the sensor number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WtWebGraphAnalogIn57643PortEntry

wtWebGraphAnalogIn57643PortEntry		1.3.6.1.4.1.5040.1.2.12.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	WtWebGraphAnalogIn57643PortEntry

wtWebGraphAnalogIn57643PortName		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.1
Name of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortText		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.2
Description of the sensor.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortOffset1		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 2 decimal places at set point 1.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SetPoint1		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.4
Offset calibration: set point 1 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortOffset2		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 2 decimal places at set point 2.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643SetPoint2		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.6
Offset calibration: set point 2 in degrees with maximum 2 decimal places.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortComment		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortSensorSelect		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.8
Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused Binary coded options for sensor 2: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-10V (default) Bit 1 : Disconnect Bit 2-7: unused
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(4)

wtWebGraphAnalogIn57643PortUnit		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.9
User scale: displayed unit.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortScale0		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.10
User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643PortScale100		1.3.6.1.4.1.5040.1.2.12.3.2.1.1.11
User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfName		1.3.6.1.4.1.5040.1.2.12.3.3.1
Manufacturer company name
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfAddr		1.3.6.1.4.1.5040.1.2.12.3.3.2
Manufacturer address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfHotline		1.3.6.1.4.1.5040.1.2.12.3.3.3
Manufacturer hotline.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfInternet		1.3.6.1.4.1.5040.1.2.12.3.3.4
Manufacturer Internet address.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfDeviceTyp		1.3.6.1.4.1.5040.1.2.12.3.3.5
Manufacturer device name (model number).
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643MfOrderNo		1.3.6.1.4.1.5040.1.2.12.3.3.6
Manufacturer part number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DiagErrorCount		1.3.6.1.4.1.5040.1.2.12.4.1
Number of entries in the error memory.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643DiagBinaryError		1.3.6.1.4.1.5040.1.2.12.4.2
Error causes coded bit-by-bit.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DiagErrorIndex		1.3.6.1.4.1.5040.1.2.12.4.3
The value of this variable is used as an index to read an error massege from wtWebGraphAnalogIn57643DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalogIn57643DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalogIn57643DiagErrorMessage.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643DiagErrorMessage		1.3.6.1.4.1.5040.1.2.12.4.4
Using wtWebGraphAnalogIn57643DiagErrorIndex as an index, the appropriate message is available.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING

wtWebGraphAnalogIn57643DiagErrorClear		1.3.6.1.4.1.5040.1.2.12.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER

wtWebGraphAnalogIn57643Alert1		31
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert2		32
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert3		33
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert4		34
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert5		35
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert6		36
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert7		37
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert8		38
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert9		91
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert10		92
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert11		93
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert12		94
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert13		95
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert14		96
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert15		97
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643Alert16		98
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE

wtWebGraphAnalogIn57643AlertDiag		110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE