WebGraph-AnalogIO-57662-US-MIB

File: WebGraph-AnalogIO-57662-US-MIB.mib (115640 bytes)

Imported modules

RFC-1212 RFC-1215 RFC1213-MIB
RFC1155-SMI

Imported symbols

OBJECT-TYPE TRAP-TYPE DisplayString
PhysAddress enterprises TimeTicks
IpAddress NetworkAddress

Defined Types

WtWebGraphAnalog57662SensorEntry  
SEQUENCE    
  wtWebGraphAnalog57662SensorNo INTEGER

WtWebGraphAnalog57662ValuesEntry  
SEQUENCE    
  wtWebGraphAnalog57662Values OCTET STRING

WtWebGraphAnalog57662BinaryValuesEntry  
SEQUENCE    
  wtWebGraphAnalog57662BinaryValues INTEGER

WtWebGraphAnalog57662BinaryIfEntry  
SEQUENCE    
  wtWebGraphAnalog57662BinaryModeNo INTEGER

WtWebGraphAnalog57662BinaryEntry  
SEQUENCE    
  wtWebGraphAnalog57662BinaryOperationMode OCTET STRING
  wtWebGraphAnalog57662BinaryTcpServerLocalPort INTEGER
  wtWebGraphAnalog57662BinaryTcpServerInputTrigger OCTET STRING
  wtWebGraphAnalog57662BinaryTcpServerApplicationMode OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientLocalPort INTEGER
  wtWebGraphAnalog57662BinaryTcpClientServerPort INTEGER
  wtWebGraphAnalog57662BinaryTcpClientServerIpAddr OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientServerPassword OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientInactivity INTEGER
  wtWebGraphAnalog57662BinaryTcpClientInputTrigger OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientInterval INTEGER
  wtWebGraphAnalog57662BinaryTcpClientApplicationMode OCTET STRING
  wtWebGraphAnalog57662BinaryUdpPeerLocalPort INTEGER
  wtWebGraphAnalog57662BinaryUdpPeerRemotePort INTEGER
  wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddr OCTET STRING
  wtWebGraphAnalog57662BinaryUdpPeerInputTrigger OCTET STRING
  wtWebGraphAnalog57662BinaryUdpPeerInterval INTEGER
  wtWebGraphAnalog57662BinaryUdpPeerApplicationMode OCTET STRING
  wtWebGraphAnalog57662BinaryConnectedPort INTEGER
  wtWebGraphAnalog57662BinaryConnectedIpAddr IpAddress
  wtWebGraphAnalog57662BinaryTcpServerClientHttpPort INTEGER
  wtWebGraphAnalog57662BinaryTcpClientServerHttpPort INTEGER
  wtWebGraphAnalog57662BinaryTcpServerHysteresis1 OCTET STRING
  wtWebGraphAnalog57662BinaryTcpServerHysteresis2 OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientHysteresis1 OCTET STRING
  wtWebGraphAnalog57662BinaryTcpClientHysteresis2 OCTET STRING
  wtWebGraphAnalog57662BinaryUdpPeerHysteresis1 OCTET STRING
  wtWebGraphAnalog57662BinaryUdpPeerHysteresis2 OCTET STRING

WtWebGraphAnalog57662SensorColorEntry  
SEQUENCE    
  wtWebGraphAnalog57662SensorColor OCTET STRING

WtWebGraphAnalog57662AlarmIfEntry  
SEQUENCE    
  wtWebGraphAnalog57662AlarmNo INTEGER

WtWebGraphAnalog57662AlarmEntry  
SEQUENCE    
  wtWebGraphAnalog57662AlarmTrigger OCTET STRING
  wtWebGraphAnalog57662AlarmMin1 OCTET STRING
  wtWebGraphAnalog57662AlarmMax1 OCTET STRING
  wtWebGraphAnalog57662AlarmHysteresis1 OCTET STRING
  wtWebGraphAnalog57662AlarmDelay OCTET STRING
  wtWebGraphAnalog57662AlarmInterval OCTET STRING
  wtWebGraphAnalog57662AlarmEnable OCTET STRING
  wtWebGraphAnalog57662AlarmEMailAddr OCTET STRING
  wtWebGraphAnalog57662AlarmMailSubject OCTET STRING
  wtWebGraphAnalog57662AlarmMailText OCTET STRING
  wtWebGraphAnalog57662AlarmManagerIP OCTET STRING
  wtWebGraphAnalog57662AlarmTrapText OCTET STRING
  wtWebGraphAnalog57662AlarmMailOptions OCTET STRING
  wtWebGraphAnalog57662AlarmTcpIpAddr OCTET STRING
  wtWebGraphAnalog57662AlarmTcpPort INTEGER
  wtWebGraphAnalog57662AlarmTcpText OCTET STRING
  wtWebGraphAnalog57662AlarmClearMailSubject OCTET STRING
  wtWebGraphAnalog57662AlarmClearMailText OCTET STRING
  wtWebGraphAnalog57662AlarmClearTrapText OCTET STRING
  wtWebGraphAnalog57662AlarmClearTcpText OCTET STRING
  wtWebGraphAnalog57662AlarmMin2 OCTET STRING
  wtWebGraphAnalog57662AlarmMax2 OCTET STRING
  wtWebGraphAnalog57662AlarmHysteresis2 OCTET STRING
  wtWebGraphAnalog57662AlarmSyslogIpAddr OCTET STRING
  wtWebGraphAnalog57662AlarmSyslogPort INTEGER
  wtWebGraphAnalog57662AlarmSyslogText OCTET STRING
  wtWebGraphAnalog57662AlarmSyslogClearText OCTET STRING
  wtWebGraphAnalog57662AlarmFtpDataPort OCTET STRING
  wtWebGraphAnalog57662AlarmFtpFileName OCTET STRING
  wtWebGraphAnalog57662AlarmFtpText OCTET STRING
  wtWebGraphAnalog57662AlarmFtpClearText OCTET STRING
  wtWebGraphAnalog57662AlarmFtpOption OCTET STRING
  wtWebGraphAnalog57662AlarmTimerCron OCTET STRING

WtWebGraphAnalog57662SensorColor2Entry  
SEQUENCE    
  wtWebGraphAnalog57662GraphicsSensorColor OCTET STRING
  wtWebGraphAnalog57662GraphicsSelectScale OCTET STRING

WtWebGraphAnalog57662ReportIfEntry  
SEQUENCE    
  wtWebGraphAnalog57662ReportNo INTEGER

WtWebGraphAnalog57662ReportEntry  
SEQUENCE    
  wtWebGraphAnalog57662ReportEnable OCTET STRING
  wtWebGraphAnalog57662ReportTimerCron OCTET STRING
  wtWebGraphAnalog57662ReportMethodeEnable OCTET STRING
  wtWebGraphAnalog57662ReportEMailAddr OCTET STRING
  wtWebGraphAnalog57662ReportMailSubject OCTET STRING
  wtWebGraphAnalog57662ReportMailText OCTET STRING
  wtWebGraphAnalog57662ReportManagerIP OCTET STRING
  wtWebGraphAnalog57662ReportTrapText OCTET STRING
  wtWebGraphAnalog57662ReportMailOptions OCTET STRING
  wtWebGraphAnalog57662ReportTcpIpAddr OCTET STRING
  wtWebGraphAnalog57662ReportTcpPort INTEGER
  wtWebGraphAnalog57662ReportTcpText OCTET STRING
  wtWebGraphAnalog57662ReportClearMailSubject OCTET STRING
  wtWebGraphAnalog57662ReportClearMailText OCTET STRING
  wtWebGraphAnalog57662ReportClearTrapText OCTET STRING
  wtWebGraphAnalog57662ReportClearTcpText OCTET STRING
  wtWebGraphAnalog57662ReportSyslogIpAddr OCTET STRING
  wtWebGraphAnalog57662ReportSyslogPort INTEGER
  wtWebGraphAnalog57662ReportSyslogText OCTET STRING
  wtWebGraphAnalog57662ReportSyslogClearText OCTET STRING
  wtWebGraphAnalog57662ReportFtpDataPort OCTET STRING
  wtWebGraphAnalog57662ReportFtpFileName OCTET STRING
  wtWebGraphAnalog57662ReportFtpText OCTET STRING
  wtWebGraphAnalog57662ReportFtpClearText OCTET STRING
  wtWebGraphAnalog57662ReportFtpOption OCTET STRING

WtWebGraphAnalog57662PortEntry  
SEQUENCE    
  wtWebGraphAnalog57662PortName OCTET STRING
  wtWebGraphAnalog57662PortText OCTET STRING
  wtWebGraphAnalog57662PortOffset1 OCTET STRING
  wtWebGraphAnalog57662SetPoint1 OCTET STRING
  wtWebGraphAnalog57662PortOffset2 OCTET STRING
  wtWebGraphAnalog57662SetPoint2 OCTET STRING
  wtWebGraphAnalog57662PortComment OCTET STRING
  wtWebGraphAnalog57662PortSensorSelect OCTET STRING
  wtWebGraphAnalog57662PortUnit OCTET STRING
  wtWebGraphAnalog57662PortScale0 OCTET STRING
  wtWebGraphAnalog57662PortScale100 OCTET STRING
  wtWebGraphAnalog57662PortOutputMode OCTET STRING
  wtWebGraphAnalog57662PortInputMode OCTET STRING
  wtWebGraphAnalog57662PortCompensationValue OCTET STRING
  wtWebGraphAnalog57662PortCompensationMode OCTET STRING

Defined Values

wut 1.3.6.1.4.1.5040
OBJECT IDENTIFIER    

wtComServer 1.3.6.1.4.1.5040.1
OBJECT IDENTIFIER    

wtWebio 1.3.6.1.4.1.5040.1.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662 1.3.6.1.4.1.5040.1.2.29
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Inventory 1.3.6.1.4.1.5040.1.2.29.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662SessCntrl 1.3.6.1.4.1.5040.1.2.29.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Config 1.3.6.1.4.1.5040.1.2.29.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Diag 1.3.6.1.4.1.5040.1.2.29.4
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Device 1.3.6.1.4.1.5040.1.2.29.3.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Ports 1.3.6.1.4.1.5040.1.2.29.3.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Manufact 1.3.6.1.4.1.5040.1.2.29.3.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Text 1.3.6.1.4.1.5040.1.2.29.3.1.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662TimeDate 1.3.6.1.4.1.5040.1.2.29.3.1.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Basic 1.3.6.1.4.1.5040.1.2.29.3.1.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Datalogger 1.3.6.1.4.1.5040.1.2.29.3.1.4
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Alarm 1.3.6.1.4.1.5040.1.2.29.3.1.5
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Graphics 1.3.6.1.4.1.5040.1.2.29.3.1.6
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Report 1.3.6.1.4.1.5040.1.2.29.3.1.7
OBJECT IDENTIFIER    

wtWebGraphAnalog57662TimeZone 1.3.6.1.4.1.5040.1.2.29.3.1.2.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662TimeServer 1.3.6.1.4.1.5040.1.2.29.3.1.2.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662DeviceClock 1.3.6.1.4.1.5040.1.2.29.3.1.2.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Network 1.3.6.1.4.1.5040.1.2.29.3.1.3.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662HTTP 1.3.6.1.4.1.5040.1.2.29.3.1.3.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Mail 1.3.6.1.4.1.5040.1.2.29.3.1.3.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662SNMP 1.3.6.1.4.1.5040.1.2.29.3.1.3.4
OBJECT IDENTIFIER    

wtWebGraphAnalog57662UDP 1.3.6.1.4.1.5040.1.2.29.3.1.3.5
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Syslog 1.3.6.1.4.1.5040.1.2.29.3.1.3.6
OBJECT IDENTIFIER    

wtWebGraphAnalog57662FTP 1.3.6.1.4.1.5040.1.2.29.3.1.3.7
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Language 1.3.6.1.4.1.5040.1.2.29.3.1.3.8
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Binary 1.3.6.1.4.1.5040.1.2.29.3.1.3.9
OBJECT IDENTIFIER    

wtWebGraphAnalog57662GraphicsBase 1.3.6.1.4.1.5040.1.2.29.3.1.6.1
OBJECT IDENTIFIER    

wtWebGraphAnalog57662GraphicsSelect 1.3.6.1.4.1.5040.1.2.29.3.1.6.2
OBJECT IDENTIFIER    

wtWebGraphAnalog57662GraphicsScale 1.3.6.1.4.1.5040.1.2.29.3.1.6.3
OBJECT IDENTIFIER    

wtWebGraphAnalog57662Sensors 1.3.6.1.4.1.5040.1.2.29.1.1
Number of sensors
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

wtWebGraphAnalog57662SensorTable 1.3.6.1.4.1.5040.1.2.29.1.2
List of sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662SensorEntry

wtWebGraphAnalog57662SensorEntry 1.3.6.1.4.1.5040.1.2.29.1.2.1
List of sensor numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662SensorEntry  

wtWebGraphAnalog57662SensorNo 1.3.6.1.4.1.5040.1.2.29.1.2.1.1
Sensor number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

wtWebGraphAnalog57662ValuesTable 1.3.6.1.4.1.5040.1.2.29.1.3
List of measurement values corresponding to the channel numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662ValuesEntry

wtWebGraphAnalog57662ValuesEntry 1.3.6.1.4.1.5040.1.2.29.1.3.1
Measurement values of the sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662ValuesEntry  

wtWebGraphAnalog57662Values 1.3.6.1.4.1.5040.1.2.29.1.3.1.1
Measurement value of the sensor, ASCII. This value will be translated according to the ports settings for the read and write operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(5)  

wtWebGraphAnalog57662BinaryValuesTable 1.3.6.1.4.1.5040.1.2.29.1.4
List of binary measurement values corresponding to the channel numbers.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662BinaryValuesEntry

wtWebGraphAnalog57662BinaryValuesEntry 1.3.6.1.4.1.5040.1.2.29.1.4.1
Binary measurement values of the sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662BinaryValuesEntry  

wtWebGraphAnalog57662BinaryValues 1.3.6.1.4.1.5040.1.2.29.1.4.1.1
Binary measurement value of the sensor in 1/1000, signed number, 0x7FFFFFFF indicates an invalid value. This value will be translated according to the ports settings for the read and write operations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662SessCntrlPassword 1.3.6.1.4.1.5040.1.2.29.2.1
Entering this password opens a session which is ended by writing a 1 to wtWebGraphAnalog57662SessCntrlLogout. When read this variable provides a string of length zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SessCntrlConfigMode 1.3.6.1.4.1.5040.1.2.29.2.2
When the device is in SNMP configuration mode, the value 1 is returned, otherwise 0. If the read value is 0 even though the password was written, the device is already in config mode and the variables can only be read.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662SessCntrl-NoSession(0), wtWebGraphAnalog57662SessCntrl-Session(1)  

wtWebGraphAnalog57662SessCntrlLogout 1.3.6.1.4.1.5040.1.2.29.2.3
If the device is in configuration mode and the session was opened by this SNMP Manager, writing a 1 to this variable will end the session and all parameters are stored. Writing a 2 discards all entries again. When read this variable provides the value 0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662SessCntrlAdminPassword 1.3.6.1.4.1.5040.1.2.29.2.4
This password protects access to the variables with administrator rights. It can only be changed by the administrator. If no password was assigned, the valid password is public.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SessCntrlConfigPassword 1.3.6.1.4.1.5040.1.2.29.2.5
This password protects access to the variables with configurator rights. It can be changed by the administrator and by the configurator. If no password was assigned, the valid password is public. When read this variable provides a null-pointer.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DeviceName 1.3.6.1.4.1.5040.1.2.29.3.1.1.1
Name of the Webio, which is user definable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DeviceText 1.3.6.1.4.1.5040.1.2.29.3.1.1.2
Description of the Webio, which is user definable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DeviceLocation 1.3.6.1.4.1.5040.1.2.29.3.1.1.3
Description of the location of the Webio, which is user definable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DeviceContact 1.3.6.1.4.1.5040.1.2.29.3.1.1.4
Contact address of the system operator of the Webio, which is user definable.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662TzOffsetHrs 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.1
Offset hours for the time zone (winter time) with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662TzOffsetMin 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.2
Offset minutes for the time zone (winter time) with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662TzEnable 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Timezone
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662StTzOffsetHrs 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.4
Offset hours of the time zone (summer time) with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662StTzOffsetMin 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.5
Offset minutes of the time zone (summer time) with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662StTzEnable 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.6
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Summertime
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662StTzStartMonth 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.7
Month in which the change is made from winter time to summer time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StartMonth-January(1), wtWebGraphAnalog57662StartMonth-February(2), wtWebGraphAnalog57662StartMonth-March(3), wtWebGraphAnalog57662StartMonth-April(4), wtWebGraphAnalog57662StartMonth-May(5), wtWebGraphAnalog57662StartMonth-June(6), wtWebGraphAnalog57662StartMonth-July(7), wtWebGraphAnalog57662StartMonth-August(8), wtWebGraphAnalog57662StartMonth-September(9), wtWebGraphAnalog57662StartMonth-October(10), wtWebGraphAnalog57662StartMonth-November(11), wtWebGraphAnalog57662StartMonth-December(12)  

wtWebGraphAnalog57662StTzStartMode 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.8
Mode of the day of the week for which the change is made from winter time to summer time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StartMode-first(1), wtWebGraphAnalog57662StartMode-second(2), wtWebGraphAnalog57662StartMode-third(3), wtWebGraphAnalog57662StartMode-fourth(4), wtWebGraphAnalog57662StartMode-last(5)  

wtWebGraphAnalog57662StTzStartWday 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.9
Day of the week on which the change is made from winter time to summer time
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StartWday-Sunday(1), wtWebGraphAnalog57662StartWday-Monday(2), wtWebGraphAnalog57662StartWday-Tuesday(3), wtWebGraphAnalog57662StartWday-Thursday(4), wtWebGraphAnalog57662StartWday-Wednesday(5), wtWebGraphAnalog57662StartWday-Friday(6), wtWebGraphAnalog57662StartWday-Saturday(7)  

wtWebGraphAnalog57662StTzStartHrs 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.10
Hour in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662StTzStartMin 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.11
Minute in which the time zone is changed from winter to summer time with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662StTzStopMonth 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.12
Month in which the change is made from summer time to winter time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StopMonth-January(1), wtWebGraphAnalog57662StopMonth-February(2), wtWebGraphAnalog57662StopMonth-March(3), wtWebGraphAnalog57662StopMonth-April(4), wtWebGraphAnalog57662StopMonth-May(5), wtWebGraphAnalog57662StopMonth-June(6), wtWebGraphAnalog57662StopMonth-July(7), wtWebGraphAnalog57662StopMonth-August(8), wtWebGraphAnalog57662StopMonth-September(9), wtWebGraphAnalog57662StopMonth-October(10), wtWebGraphAnalog57662StopMonth-November(11), wtWebGraphAnalog57662StopMonth-December(12)  

wtWebGraphAnalog57662StTzStopMode 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.13
Mode of the week day on which the change is made from summer time to winter time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StopMode-first(1), wtWebGraphAnalog57662StopMode-second(2), wtWebGraphAnalog57662StopMode-third(3), wtWebGraphAnalog57662StopMode-fourth(4), wtWebGraphAnalog57662StopMode-last(5)  

wtWebGraphAnalog57662StTzStopWday 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.14
Day of the week on which the change is made from summer time to winter time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662StopWday-Sunday(1), wtWebGraphAnalog57662StopWday-Monday(2), wtWebGraphAnalog57662StopWday-Tuesday(3), wtWebGraphAnalog57662StopWday-Thursday(4), wtWebGraphAnalog57662StopWday-Wednesday(5), wtWebGraphAnalog57662StopWday-Friday(6), wtWebGraphAnalog57662StopWday-Saturday(7)  

wtWebGraphAnalog57662StTzStopHrs 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.15
Hour at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662StTzStopMin 1.3.6.1.4.1.5040.1.2.29.3.1.2.1.16
Minute at which the time zone is changed from summer to winter time with respect to UTC.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662TimeServer1 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.1
IP address or name of the 1st time server in ASCII
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662TimeServer2 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.2
IP address or name of the 2nd time server in ASCII
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662TsEnable 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.3
Binary coded conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Apply Time Server
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662TsSyncTime 1.3.6.1.4.1.5040.1.2.29.3.1.2.2.4
Daily synchronisation time with the time server (hour: 0-23).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662ClockHrs 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.1
Clock hours taking into account the time zone settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

wtWebGraphAnalog57662ClockMin 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.2
Clock minutes taking into account the time zone settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

wtWebGraphAnalog57662ClockDay 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.3
Date: Day of the month, taking into account the time zone settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..31  

wtWebGraphAnalog57662ClockMonth 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.4
Date: Month, taking into account the time zone settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662ClockMonth-January(1), wtWebGraphAnalog57662ClockMonth-February(2), wtWebGraphAnalog57662ClockMonth-March(3), wtWebGraphAnalog57662ClockMonth-April(4), wtWebGraphAnalog57662ClockMonth-May(5), wtWebGraphAnalog57662ClockMonth-June(6), wtWebGraphAnalog57662ClockMonth-July(7), wtWebGraphAnalog57662ClockMonth-August(8), wtWebGraphAnalog57662ClockMonth-September(9), wtWebGraphAnalog57662ClockMonth-October(10), wtWebGraphAnalog57662ClockMonth-November(11), wtWebGraphAnalog57662ClockMonth-December(12)  

wtWebGraphAnalog57662ClockYear 1.3.6.1.4.1.5040.1.2.29.3.1.2.3.5
Date: Year, taking into account the time zone settings.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wtWebGraphAnalog57662IpAddress 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.1
IP address of the Webio
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wtWebGraphAnalog57662SubnetMask 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.2
Subnet mask of the Webio
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wtWebGraphAnalog57662Gateway 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.3
Gateway of the Webio
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

wtWebGraphAnalog57662DnsServer1 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.4
IP address of the 1st DNS server in ASCII
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DnsServer2 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.5
IP address of the 2nd DNS server in ASCII
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AddConfig 1.3.6.1.4.1.5040.1.2.29.3.1.3.1.6
Additional configuration (1=ON): Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: DHCP disable Bit 0: BOOTP disable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662Startup 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.1
Binary coded start page: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1: Index.htm Bit 2: Home.htm Bit 3: User.htm Only one page may be selected at a time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GetHeaderEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.2
If these bits are set, every answer of a short form GET question will be lead by the IP-address and name of the device and/or a HTTP header: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-6: unused Bit 1 : GET HTTP enable Bit 0 : GET Header enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662HttpPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.2.3
Definition of the standard HTML port (Default: 80).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662MailAdName 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.1
Device name for mail administration.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MailReply 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.2
Reply address for the mail server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MailServer 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.3
Name or IP address of the mail server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebioAn1MailEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.4
Set this bit to enable the sending of mails: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Mail enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MailAuthentication 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.5
Selection of the authentication modi: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : POP3 before SMTP Bit 1 : ESMTP, authentication Bit 0 : SMTP, no authentication
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662MailAuthUser 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.6
Name of the user to be authenticated.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MailAuthPassword 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.7
Authentication password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MailPop3Server 1.3.6.1.4.1.5040.1.2.29.3.1.3.3.8
Name or Ip-address of the POP3 Servers.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SnmpCommunityStringRead 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.1
Community string read only
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SnmpCommunityStringReadWrite 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.2
Community string read / write
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SystemTrapManagerIP 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.3
Name or IP address of the TCP server which accepts the system trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SystemTrapEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.4
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662SnmpEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.5
Set bit 0 to enable SNMP. If disabled, the device did not respond to any SNMP requests. Bit 1 decided wether the community string of read operations is compared with the system password or not: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : SNMP enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SnmpCommunityStringTrap 1.3.6.1.4.1.5040.1.2.29.3.1.3.4.6
Community string send within traps.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662UdpPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.5.1
Udp port to which the Udp queries ( short form GET requests) can be sent. This port number must be unique within the device.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662UdpEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.5.2
Set this bit to enable UDP support: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : UDP enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SyslogServerIP 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.1
Name or IP address of the Syslog server, which accepts the Syslog messgaes.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SyslogServerPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.2
Portnumber of the Syslog servers, default 514.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662SyslogSystemMessagesEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.3
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: ColdStart Bit 1: WarmStart Bit 2: Diag Messages Bit 3-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662SyslogEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.6.4
Set bit 0to enable Syslog: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Syslog enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPServerIP 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.1
Name or IP address of the FTP server, which accepts the FTP messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPServerControlPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.2
Portnumber of the control port of the FTP server, default 21.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662FTPUserName 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.3
FTP Loggin: user name.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPPassword 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.4
FTP Loggin: user password.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPAccount 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.5
FTP Loggin: name of account.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPOption 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.6
Bit 0 switches the FTP Server in Passiv-Mode, the Client controls the data connection on its own: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : PASV enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662FTPEnable 1.3.6.1.4.1.5040.1.2.29.3.1.3.7.7
Set Bit 0 to enable FTP: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : FTP enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662LanguageSelect 1.3.6.1.4.1.5040.1.2.29.3.1.3.8.1
Language selection: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 2-7: unused Bit 1 : English Bit 0 : German
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryModeCount 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.1
Number of independent binary channels.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

wtWebGraphAnalog57662BinaryIfTable 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2
Table of indices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662BinaryIfEntry

wtWebGraphAnalog57662BinaryIfEntry 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1
Indices of the binary channels.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662BinaryIfEntry  

wtWebGraphAnalog57662BinaryModeNo 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.2.1.1
Number of the binary channel.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..2  

wtWebGraphAnalog57662BinaryTable 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3
Table of properties of the binary mode.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662BinaryEntry

wtWebGraphAnalog57662BinaryEntry 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1
Binary properties.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662BinaryEntry  

wtWebGraphAnalog57662BinaryOperationMode 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.1
Selection of the operation mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : UDP Peer Bit 1 : TCP Client Bit 0 : TCP Server
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryTcpServerLocalPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.2
Local TCP port for data exchange in this server mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryTcpServerInputTrigger 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.3
Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryTcpServerApplicationMode 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.4
Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 4-7: unused Bit 3 : OPC Device Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryTcpClientLocalPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.5
Local TCP port for data exchange in this client mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryTcpClientServerPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.6
Port number of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server port to zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryTcpClientServerIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.7
Ip address of the server. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the server IP address to 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryTcpClientServerPassword 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.8
Building a connection may be protected by the administrator password of the server. Enter the server password to establish the connection, if a server administrator password exists.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryTcpClientInactivity 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.9
Connection timeout in 100ms. If no data are exchanged within the specified time, the device closes the connection to the server. The value 0 deactivates the timer. Using the Box2Box mode this function is disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662BinaryTcpClientInputTrigger 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.10
Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryTcpClientInterval 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.11
Configurable interval with a 100ms base, in which the Webio device sends data to the configured application. A interval of zero stopps the periodical sending.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wtWebGraphAnalog57662BinaryTcpClientApplicationMode 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.12
Selection of the application mode: The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryUdpPeerLocalPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.13
Local UDP port for data exchange in this peer to peer mode. This port number must be unique within the device. Reserved port number must not be used (refere to the manual).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryUdpPeerRemotePort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.14
Port number of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote port to zero.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryUdpPeerRemoteIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.15
Ip address of the remote device. A complete set of port number, IP address and a valid input/output mask starts this mode. No data exchange take place when setting the remote device IP address to 0.0.0.0.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryUdpPeerInputTrigger 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.16
Every change on the inputs causes their state to be transmitted to the remote device. To minimize data traffic, individual inputs may be exempted from this rule. Nevertheless every transmission will contain all input states. If a bit is set (1), a change of state on the corresponding input triggers a transmission. If the bit is not set (0), no transmission takes place. The OCTETS are interpreted bit-by-bit, with each bit corresponding to an input. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4, Bit 0-1: Analog inputs 0-1
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryUdpPeerInterval 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.17
Configurable interval with a 100ms base, in which the Webio device sends data to the configured remote device. A interval of zero stopps the periodical sending.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

wtWebGraphAnalog57662BinaryUdpPeerApplicationMode 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.18
Selection of the application mode: The OCTETS are interpreted bit-by-bit, with each bit corresponding to an output. Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 3-7: unused Bit 2 : Box2Box Slave Bit 1 : Compatible 50xxx Bit 0 : Default
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662BinaryConnectedPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.19
Port number of the remote device, after connection has been established. In case of no connection or missing port informations a zero will be read.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryConnectedIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.20
IP address of the remote device, after connection has been established. In case of no connection or missing port informations 0.0.0.0 will be read.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

wtWebGraphAnalog57662BinaryTcpServerClientHttpPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.21
HTTP port number of the remote device at TCP Server Mode. If an mailfunction occurs status informations will be send to this port. Not used at mode Compatible 50xxx.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryTcpClientServerHttpPort 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.22
HTTP port number of the remote device at TCP Client Mode. In the operating mode Box2Box connection status informations will be exchanged through this port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662BinaryTcpServerHysteresis1 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.23
A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryTcpServerHysteresis2 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.24
A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpServerInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryTcpClientHysteresis1 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.25
A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryTcpClientHysteresis2 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.26
A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryTcpClientInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryUdpPeerHysteresis1 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.27
A change greater than this value initiate a transmission of the corresponding input value. The input 1 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662BinaryUdpPeerHysteresis2 1.3.6.1.4.1.5040.1.2.29.3.1.3.9.3.1.28
A change greater than this value initiate a transmission of the corresponding input value. The input 2 must be selected at wtWebGraphAnalog57662BinaryUdpPeerInputTrigger. With a hysteresis of zero any change will be transmitted.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662LoggerTimebase 1.3.6.1.4.1.5040.1.2.29.3.1.4.1
Time base of the data logger
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662Datalogger-15Sec(1), wtWebGraphAnalog57662Datalogger-30Sec(2), wtWebGraphAnalog57662Datalogger-1Min(3), wtWebGraphAnalog57662Datalogger-5Min(4), wtWebGraphAnalog57662Datalogger-15Min(5), wtWebGraphAnalog57662Datalogger-60Min(6)  

wtWebGraphAnalog57662LoggerSensorSel 1.3.6.1.4.1.5040.1.2.29.3.1.4.2
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662DisplaySensorSel 1.3.6.1.4.1.5040.1.2.29.3.1.4.3
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662SensorColorTable 1.3.6.1.4.1.5040.1.2.29.3.1.4.4
List of sensor colors for the praphical presentation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662SensorColorEntry

wtWebGraphAnalog57662SensorColorEntry 1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1
Index numbers of the sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662SensorColorEntry  

wtWebGraphAnalog57662SensorColor 1.3.6.1.4.1.5040.1.2.29.3.1.4.4.1.1
Color of the sensors at the praphical presention.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3)  

wtWebGraphAnalog57662AutoScaleEnable 1.3.6.1.4.1.5040.1.2.29.3.1.4.5
If bit 0 is set, vertical auto scale is enabled: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 1-7: unused Bit 0 : Auto Scale enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662VerticalUpperLimit 1.3.6.1.4.1.5040.1.2.29.3.1.4.6
This value defines the maximum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662VerticalLowerLimit 1.3.6.1.4.1.5040.1.2.29.3.1.4.7
This value defines the minimum temperature shown in the graphical presentation, if no auto scaling is selected. Temperature in degrees with maximum 2 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662HorizontalZoom 1.3.6.1.4.1.5040.1.2.29.3.1.4.8
Defines the default zoom stage, if no auto scaling is selected.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER wtWebGraphAnalog57662Zoom-25min(1), wtWebGraphAnalog57662Zoom-75min(2), wtWebGraphAnalog57662Zoom-5hrs(3), wtWebGraphAnalog57662Zoom-30hrs(4), wtWebGraphAnalog57662Zoom-5days(5), wtWebGraphAnalog57662Zoom-25days(6)  

wtWebGraphAnalog57662AlarmCount 1.3.6.1.4.1.5040.1.2.29.3.1.5.1
Number of independent alarms.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

wtWebGraphAnalog57662AlarmIfTable 1.3.6.1.4.1.5040.1.2.29.3.1.5.2
List of alarm indices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662AlarmIfEntry

wtWebGraphAnalog57662AlarmIfEntry 1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1
Numbers of the alarms.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662AlarmIfEntry  

wtWebGraphAnalog57662AlarmNo 1.3.6.1.4.1.5040.1.2.29.3.1.5.2.1.1
Alarm number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

wtWebGraphAnalog57662AlarmTable 1.3.6.1.4.1.5040.1.2.29.3.1.5.3
List of settings depending on the alarm number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662AlarmEntry

wtWebGraphAnalog57662AlarmEntry 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1
Alarm parameters of the individual alarms.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662AlarmEntry  

wtWebGraphAnalog57662AlarmTrigger 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.1
Binary coded trigger conditions: Octet 1: unused Octet 2: unused Octet 3: Bit 0: Timer Bit 1: ColdStart Bit 2: WarmStart Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662AlarmMin1 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.2
Minimum sensor 1 with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMax1 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.3
Maximum sensor 1 with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmHysteresis1 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.4
Reading changes of this size clears the alarm state (MAX-hyst, MIN+hyst.) with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmDelay 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.5
Alarm will be delayed by setting this time while stable alarm condition occur (time in minutes).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmInterval 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.6
Send interval for alarm messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmEnable 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.7
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662AlarmEMailAddr 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMailSubject 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.9
Subject line for alarm mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMailText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.10
Alarm mail text: provides the current temperature; n = 1..2. provides the current time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmManagerIP 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmTrapText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.12
This text is sent in the trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMailOptions 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662AlarmTcpIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmTcpPort 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662AlarmTcpText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.16
This text is sent in the TCP trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmClearMailSubject 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.17
Subject line for alarm clear mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmClearMailText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.18
Alarm clear mail text: provides the current temperature; n = 1..2. provides the current time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmClearTrapText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.19
This text is sent in the trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmClearTcpText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.20
This text is sent in the TCP trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMin2 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.21
Minimum sensor 2 with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmMax2 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.22
Maximum sensor 2 with maximum 2 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmHysteresis2 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.23
Hysterese rel. sensor 2 with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmSyslogIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.24
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmSyslogPort 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.25
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662AlarmSyslogText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.26
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmSyslogClearText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.27
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmFtpDataPort 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.28
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmFtpFileName 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.29
Name of the file including path informations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmFtpText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.30
Message text to store on the FTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmFtpClearText 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.31
Alarm clear message to store on the FTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662AlarmFtpOption 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.32
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662AlarmTimerCron 1.3.6.1.4.1.5040.1.2.29.3.1.5.3.1.33
This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsBaseEnable 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.1
Defines the viewing options of the graphic: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Auto scroll enable Bit 1 : Show table Bit 2 : Show graph Bit 3 : Show control buttons Bit 4 : Show config menu Bit 5-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsBaseWidth 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.2
Defines the width of the graphic in pixels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsBaseHeight 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.3
Defines the height of the graphic in pixels.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsBaseFrameColor 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.4
Frame color definition in RGB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3)  

wtWebGraphAnalog57662GraphicsBaseBackgroundColor 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.5
Background color definition in RGB.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3)  

wtWebGraphAnalog57662GraphicsBasePollingrate 1.3.6.1.4.1.5040.1.2.29.3.1.6.1.6
Defines the pollingrate in seconds, which defines the refreshing intervall of the graphic.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsSelectDisplaySensorSel 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.1
Binary coded sensor selection: only selected sensors will be shown in the graphical presentation: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662GraphicsSelectDisplayShowExtrem 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.2
Binary coded sensor selection: only selected sensors will be shown with minima and maxima: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Sensor 1 Bit 1: Sensor 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662SensorColor2Table 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3
List of sensor colors for the praphical presentation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662SensorColor2Entry

wtWebGraphAnalog57662SensorColor2Entry 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1
Numbers of the sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662SensorColor2Entry  

wtWebGraphAnalog57662GraphicsSensorColor 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.1
Color of the sensors at the praphical presention.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(3)  

wtWebGraphAnalog57662GraphicsSelectScale 1.3.6.1.4.1.5040.1.2.29.3.1.6.2.3.1.2
Assignes one of 4 scales to a sensor: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Use Scale 1 Bit 1 : Use Scale 2 Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsScaleAutoScaleEnable 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.1
Select the Auto Scale Mode: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto scale enable Bit 1 : Scale 2 Auto scale enable Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsScaleAutoFitEnable 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.2
Select the Auto Fit Mode:: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Scale 1 Auto fit enable Bit 1 : Scale 2 Auto fit enable Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsScale1Min 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.3
Scale 1: Minimum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsScale2Min 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.4
Scale 2: Minimum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsScale1Max 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.7
Scale 1: Maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsScale2Max 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.8
Scale 2: Maximum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662GraphicsScale1Unit 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.11
Scale 1: Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662GraphicsScale2Unit 1.3.6.1.4.1.5040.1.2.29.3.1.6.3.12
Scale 2: Unit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportCount 1.3.6.1.4.1.5040.1.2.29.3.1.7.1
Number of independent Reports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..8  

wtWebGraphAnalog57662ReportIfTable 1.3.6.1.4.1.5040.1.2.29.3.1.7.2
List of Report indices.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662ReportIfEntry

wtWebGraphAnalog57662ReportIfEntry 1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1
Numbers of the Reports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662ReportIfEntry  

wtWebGraphAnalog57662ReportNo 1.3.6.1.4.1.5040.1.2.29.3.1.7.2.1.1
Report number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662ReportTable 1.3.6.1.4.1.5040.1.2.29.3.1.7.3
List of settings depending on the Report number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662ReportEntry

wtWebGraphAnalog57662ReportEntry 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1
Report parameters of the individual Reports.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662ReportEntry  

wtWebGraphAnalog57662ReportEnable 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.1
Binar kodierte Triggerbedingungen: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Report enable Bit 1-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662ReportTimerCron 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.2
This entry defines a time window for alarm 1-8 and a activation time for the report. A time window is definied by start and stop time stamp, seperated by a space or tab. The activation time of the report is defined by a single start time stamp. Each time stamp contains 5 space or tab seperated text fields for time trigger definition. Each field must match with the actual time to trigger an action, weekday and day of month are interpreted separatley. 1: Minutes Range 0-59 2. Hours Range 0-23, 0 is midnight 3: Day of month Range 1-31 4: Month Range 1-12 5: Weekday Range 0-6, 0 is sunday Syntax for every field: - an asterix (*) enables every possible setting of a field - single numbers seperated by commas (i.e.: 2,14,22) - a partition within the allowed range (i.e.: 1-5) - step size within a partition of the allowed range (i.e.: 0-59/2 every second minute).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportMethodeEnable 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.3
Binary coded alarm enable: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0: Mail Enable Bit 1: SNMP Trap enable Bit 2: TCP Client enable Bit 3: Syslog enable Bit 4: FTP Client enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662ReportEMailAddr 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.8
E-Mail address for sending the alarm mail to.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportMailSubject 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.9
Subject line for alarm mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportMailText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.10
Report mail text: provides the current temperature; n = 1..2. provides the current time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportManagerIP 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.11
Name or IP address of the SNMP Manager which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportTrapText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.12
This text is sent in the trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportMailOptions 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.13
Binary coded options: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : Attach Thermo.csv Enable Bit 1 : CSV-Data_since_last_report Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662ReportTcpIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.14
Name or IP address of the TCP server which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportTcpPort 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.15
Port number of the TCP server which accepts the trap.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662ReportTcpText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.16
This text is sent in the TCP trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportClearMailSubject 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.17
Subject line for alarm clear mail.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportClearMailText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.18
Report clear mail text: provides the current temperature; n = 1..2. provides the current time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportClearTrapText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.19
This text is sent in the trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportClearTcpText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.20
This text is sent in the TCP trap body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportSyslogIpAddr 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.24
IP address of the syslog server to which the Webio device should send syslog messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportSyslogPort 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.25
Port number of the syslog server to which the Webio device should send syslog messages.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wtWebGraphAnalog57662ReportSyslogText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.26
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportSyslogClearText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.27
Every message starts with the priority key, a time stamp and the host ip address, according RFC3164. This text appears in the following syslog message body of a alarm clear message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportFtpDataPort 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.28
Local data port: 1..65535 or AUTO: the next free port will be assigned.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportFtpFileName 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.29
Name of the file including path informations.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportFtpText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.30
Message text to store on the FTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportFtpClearText 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.31
Report clear message to store on the FTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662ReportFtpOption 1.3.6.1.4.1.5040.1.2.29.3.1.7.3.1.32
Binary coded options, select only one option at the same time: STORE = replace file APPEND = append message at the end of the file Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : STORE Bit 1 : APPEND Bit 2-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662PortTable 1.3.6.1.4.1.5040.1.2.29.3.2.1
List of settings depending on the sensor number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WtWebGraphAnalog57662PortEntry

wtWebGraphAnalog57662PortEntry 1.3.6.1.4.1.5040.1.2.29.3.2.1.1
Sensor parameters for the individual sensors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  WtWebGraphAnalog57662PortEntry  

wtWebGraphAnalog57662PortName 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.1
Name of the sensor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortText 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.2
Description of the sensor.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortOffset1 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.3
Offset calibration: Offset in degrees with maximum 3 decimal places at set point 1.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SetPoint1 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.4
Offset calibration: Reference set point 1 in degrees with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortOffset2 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.5
Offset calibration: Offset in degrees with maximum 3 decimal places at set point 2.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662SetPoint2 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.6
Offset calibration: Reference set point 2 in degrees with maximum 3 decimal places.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortComment 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.7
Offset calibration: informations of date, name of operator, reference devices.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortSensorSelect 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.8
Binary coded options for sensor 1: Octet 1: unused Octet 2: unused Octet 3: unused Octet 4: Bit 0 : 0-20mA (default) Bit 1 : 4-20mA Bit 2 : Disconnect Bit 3-7: unused
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662PortUnit 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.9
User scale: displayed unit.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortScale0 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.10
User scale: displayed value in 1/1000 at 0% full scale range. Range: -999999.999 to 999999.999
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortScale100 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.11
User scale: displayed value in 1/1000 at 100% full scale range. Range: -999999.999 to 999999.999
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortOutputMode 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.12
This binary coded output mode defines the individual operation mode for any output. More than one mode must not be selected. If an output mode is selected, Bit 2 in wtWebGraphAnalog57662PortInputMode will be set automatically. The OCTETS are interpreted bit-by-bit, Bit 0 corresponds to the LSB. OCTET 1: unused OCTET 2: unused OCTET 3: unused OCTET 4: Bit 6-7: unused Bit 5 : Output OFF Bit 4 : Binary 2 Bit 3 : Binary 1 Bit 2 : SNMP Bit 1 : UDP ASCII Bit 0 : HTTP
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662PortInputMode 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.13
This binary coded input mode defines the individual operation mode for any input. More than one mode must not be selected. If an input mode is selected, Bit 5 in wtWebGraphAnalog57662PortOutputMode will be set automatically. The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4: Bit 3-7: unused Bit 2 : I-Output Bit 1 : I-Input, active Bit 0 : I-Input, passive
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662PortCompensationValue 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.14
This entry is used to optimize the step response with capcitive loads.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662PortCompensationMode 1.3.6.1.4.1.5040.1.2.29.3.2.1.1.15
This binary coded compensation mode defines the individual operation mode for any output. If Auto adaptive is selected, the optimal value of wtWebGraphAnalog57662PortCompensationValue will be determinate continuously. Set Bit 1 to start with the last saved value of wtWebGraphAnalog57662PortCompensationValue in this Mode. If Bit 0 is cleared and Auto Mode is off wtWebGraphAnalog57662PortCompensationValue will allways be used, regardless of the state of Bit 1. The OCTETS are interpreted bit-by-bit,Bit 0 corresponds to the LSB. OCTET 1: ungenutzt OCTET 2: ungenutzt OCTET 3: ungenutzt OCTET 4: Bit 2-7: unused Bit 1 : Use saved value at power on Bit 0 : Auto adaptive enable
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(4)  

wtWebGraphAnalog57662MfName 1.3.6.1.4.1.5040.1.2.29.3.3.1
Manufacturer company name
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MfAddr 1.3.6.1.4.1.5040.1.2.29.3.3.2
Manufacturer address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MfHotline 1.3.6.1.4.1.5040.1.2.29.3.3.3
Manufacturer hotline.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MfInternet 1.3.6.1.4.1.5040.1.2.29.3.3.4
Manufacturer Internet address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MfDeviceTyp 1.3.6.1.4.1.5040.1.2.29.3.3.5
Manufacturer device name (model number).
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662MfOrderNo 1.3.6.1.4.1.5040.1.2.29.3.3.6
Manufacturer part number.
Status: mandatory Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DiagErrorCount 1.3.6.1.4.1.5040.1.2.29.4.1
Number of entries in the error memory.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662DiagBinaryError 1.3.6.1.4.1.5040.1.2.29.4.2
Error causes coded bit-by-bit.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DiagErrorIndex 1.3.6.1.4.1.5040.1.2.29.4.3
The value of this variable is used as an index to read an error massege from wtWebGraphAnalog57662DiagErrorMessage. Errors are numbered from 1 to wtWebGraphAnalog57662DiagErrorCount. Writing a valid value into this variable, making the appropriate message readable from wtWebGraphAnalog57662DiagErrorMessage.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662DiagErrorMessage 1.3.6.1.4.1.5040.1.2.29.4.4
Using wtWebGraphAnalog57662DiagErrorIndex as an index, the appropriate message is available.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wtWebGraphAnalog57662DiagErrorClear 1.3.6.1.4.1.5040.1.2.29.4.5
Writing 1 into this variable clears all diagnosis messages.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER  

wtWebGraphAnalog57662Alert1 31
This SNMP trap is generated when Alarm 1 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert2 32
This SNMP trap is generated when Alarm 2 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert3 33
This SNMP trap is generated when Alarm 3 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert4 34
This SNMP trap is generated when Alarm 4 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert5 35
This SNMP trap is generated when Alarm 5 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert6 36
This SNMP trap is generated when Alarm 6 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert7 37
This SNMP trap is generated when Alarm 7 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert8 38
This SNMP trap is generated when Alarm 8 was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert9 91
This SNMP trap is generated when Alarm 1 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert10 92
This SNMP trap is generated when Alarm 2 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert11 93
This SNMP trap is generated when Alarm 3 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert12 94
This SNMP trap is generated when Alarm 4 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert13 95
This SNMP trap is generated when Alarm 5 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert14 96
This SNMP trap is generated when Alarm 6 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert15 97
This SNMP trap is generated when Alarm 7 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662Alert16 98
This SNMP trap is generated when Alarm 8 was cleared, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662AlertReport 39
This SNMP trap is generated when the report was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

wtWebGraphAnalog57662AlertDiag 110
This SNMP trap is generated when a diagnosis/error message was triggered, SNMP trap enable is set and SNMP is enabled.
TRAP-TYPE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor