WR-SWITCH-MIB

Imported modules

Imported symbols

OBJECT-TYPE	Integer32	Unsigned32
Counter32	Counter64	MODULE-IDENTITY
enterprises	DisplayString	PhysAddress

Defined Types

WrsDiskEntry
SEQUENCE
	wrsDiskIndex	Unsigned32
	wrsDiskMountPath	DisplayString
	wrsDiskSize	Integer32
	wrsDiskUsed	Integer32
	wrsDiskFree	Integer32
	wrsDiskUseRate	Integer32
	wrsDiskFilesystem	DisplayString

WrsPstatsEntry
SEQUENCE
	wrsPstatsIndex	Unsigned32
	wrsPstatsPortName	DisplayString
	wrsPstatsTXUnderrun	Counter32
	wrsPstatsRXOverrun	Counter32
	wrsPstatsRXInvalidCode	Counter32
	wrsPstatsRXSyncLost	Counter32
	wrsPstatsRXPauseFrames	Counter32
	wrsPstatsRXPfilterDropped	Counter32
	wrsPstatsRXPCSErrors	Counter32
	wrsPstatsRXGiantFrames	Counter32
	wrsPstatsRXRuntFrames	Counter32
	wrsPstatsRXCRCErrors	Counter32
	wrsPstatsRXPclass0	Counter32
	wrsPstatsRXPclass1	Counter32
	wrsPstatsRXPclass2	Counter32
	wrsPstatsRXPclass3	Counter32
	wrsPstatsRXPclass4	Counter32
	wrsPstatsRXPclass5	Counter32
	wrsPstatsRXPclass6	Counter32
	wrsPstatsRXPclass7	Counter32
	wrsPstatsTXFrames	Counter32
	wrsPstatsRXFrames	Counter32
	wrsPstatsRXDropRTUFull	Counter32
	wrsPstatsRXPrio0	Counter32
	wrsPstatsRXPrio1	Counter32
	wrsPstatsRXPrio2	Counter32
	wrsPstatsRXPrio3	Counter32
	wrsPstatsRXPrio4	Counter32
	wrsPstatsRXPrio5	Counter32
	wrsPstatsRXPrio6	Counter32
	wrsPstatsRXPrio7	Counter32
	wrsPstatsRTUValid	Counter32
	wrsPstatsRTUResponses	Counter32
	wrsPstatsRTUDropped	Counter32
	wrsPstatsFastMatchPriority	Counter32
	wrsPstatsFastMatchFastForward	Counter32
	wrsPstatsFastMatchNonForward	Counter32
	wrsPstatsFastMatchRespValid	Counter32
	wrsPstatsFullMatchRespValid	Counter32
	wrsPstatsForwarded	Counter32
	wrsPstatsTRURespValid	Counter32

WrsPtpDataEntry
SEQUENCE
	wrsPtpDataIndex	Unsigned32
	wrsPtpPortName	DisplayString
	wrsPtpGrandmasterID	OCTET STRING
	wrsPtpOwnID	OCTET STRING
	wrsPtpMode	INTEGER
	wrsPtpServoState	DisplayString
	wrsPtpServoStateN	INTEGER
	wrsPtpPhaseTracking	INTEGER
	wrsPtpSyncSource	DisplayString
	wrsPtpClockOffsetPs	Counter64
	wrsPtpClockOffsetPsHR	Integer32
	wrsPtpSkew	Integer32
	wrsPtpRTT	Counter64
	wrsPtpLinkLength	Unsigned32
	wrsPtpServoUpdates	Counter32
	wrsPtpDeltaTxM	Integer32
	wrsPtpDeltaRxM	Integer32
	wrsPtpDeltaTxS	Integer32
	wrsPtpDeltaRxS	Integer32
	wrsPtpServoStateErrCnt	Counter32
	wrsPtpClockOffsetErrCnt	Counter32
	wrsPtpRTTErrCnt	Counter32
	wrsPtpServoUpdateTime	Counter64
	wrsPtpServoExt	INTEGER

WrsPortStatusEntry
SEQUENCE
	wrsPortStatusIndex	Unsigned32
	wrsPortStatusPortName	DisplayString
	wrsPortStatusLink	INTEGER
	wrsPortStatusConfiguredMode	INTEGER
	wrsPortStatusLocked	INTEGER
	wrsPortStatusPeer	OCTET STRING
	wrsPortStatusSfpVN	DisplayString
	wrsPortStatusSfpPN	DisplayString
	wrsPortStatusSfpVS	DisplayString
	wrsPortStatusSfpInDB	INTEGER
	wrsPortStatusSfpGbE	INTEGER
	wrsPortStatusSfpError	INTEGER
	wrsPortStatusPtpTxFrames	Counter32
	wrsPortStatusPtpRxFrames	Counter32
	wrsPortStatusMonitor	INTEGER
	wrsPortStatusSfpDom	INTEGER
	wrsPortStatusSfpTemp	INTEGER
	wrsPortStatusSfpVcc	INTEGER
	wrsPortStatusSfpTxBias	INTEGER
	wrsPortStatusSfpTxPower	INTEGER
	wrsPortStatusSfpRxPower	INTEGER
	wrsPortStatusT24p	INTEGER
	wrsPortStatusT24pValid	INTEGER

WrsPstatsHCEntry
SEQUENCE
	wrsPstatsHCIndex	Unsigned32
	wrsPstatsHCPortName	DisplayString
	wrsPstatsHCTXUnderrun	Counter64
	wrsPstatsHCRXOverrun	Counter64
	wrsPstatsHCRXInvalidCode	Counter64
	wrsPstatsHCRXSyncLost	Counter64
	wrsPstatsHCRXPauseFrames	Counter64
	wrsPstatsHCRXPfilterDropped	Counter64
	wrsPstatsHCRXPCSErrors	Counter64
	wrsPstatsHCRXGiantFrames	Counter64
	wrsPstatsHCRXRuntFrames	Counter64
	wrsPstatsHCRXCRCErrors	Counter64
	wrsPstatsHCRXPclass0	Counter64
	wrsPstatsHCRXPclass1	Counter64
	wrsPstatsHCRXPclass2	Counter64
	wrsPstatsHCRXPclass3	Counter64
	wrsPstatsHCRXPclass4	Counter64
	wrsPstatsHCRXPclass5	Counter64
	wrsPstatsHCRXPclass6	Counter64
	wrsPstatsHCRXPclass7	Counter64
	wrsPstatsHCTXFrames	Counter64
	wrsPstatsHCRXFrames	Counter64
	wrsPstatsHCRXDropRTUFull	Counter64
	wrsPstatsHCRXPrio0	Counter64
	wrsPstatsHCRXPrio1	Counter64
	wrsPstatsHCRXPrio2	Counter64
	wrsPstatsHCRXPrio3	Counter64
	wrsPstatsHCRXPrio4	Counter64
	wrsPstatsHCRXPrio5	Counter64
	wrsPstatsHCRXPrio6	Counter64
	wrsPstatsHCRXPrio7	Counter64
	wrsPstatsHCRTUValid	Counter64
	wrsPstatsHCRTUResponses	Counter64
	wrsPstatsHCRTUDropped	Counter64
	wrsPstatsHCFastMatchPriority	Counter64
	wrsPstatsHCFastMatchFastForward	Counter64
	wrsPstatsHCFastMatchNonForward	Counter64
	wrsPstatsHCFastMatchRespValid	Counter64
	wrsPstatsHCFullMatchRespValid	Counter64
	wrsPstatsHCForwarded	Counter64
	wrsPstatsHCTRURespValid	Counter64
	wrsPstatsHCNICTXFrames	Counter64

WrsPtpInstanceEntry
SEQUENCE
	wrsPtpInstancePortIndex	Unsigned32
	wrsPtpInstanceOnPortIndex	Unsigned32
	wrsPtpInstanceName	DisplayString
	wrsPtpInstancePort	INTEGER
	wrsPtpInstancePortInstance	INTEGER
	wrsPtpInstancePortName	DisplayString
	wrsPtpInstanceState	INTEGER
	wrsPtpInstanceMasterOnly	INTEGER
	wrsPtpInstanceExtPortCfgDesSt	INTEGER
	wrsPtpInstanceMechanism	INTEGER
	wrsPtpInstanceProfile	INTEGER
	wrsPtpInstanceExtension	INTEGER
	wrsPtpInstanceAsymEnabled	INTEGER
	wrsPtpInstanceAsymConstAsymPS	Counter64
	wrsPtpInstanceAsymScDelayCoef	Counter64
	wrsPtpInstanceAsymScDelayCoefHR	DisplayString
	wrsPtpInstanceTSCorrEgressLatPS	Counter64
	wrsPtpInstanceTSCorrIngLatPS	Counter64
	wrsPtpInstanceTSCorrSemistLatPS	Counter64
	wrsPtpInstanceProtoDetectState	INTEGER
	wrsPtpInstanceExtState	INTEGER
	wrsPtpInstancePeerMac	PhysAddress
	wrsPtpInstancePeerVid	INTEGER
	wrsPtpInstanceVlanNum	INTEGER
	wrsPtpInstanceVlanListStr	DisplayString
	wrsPtpInstanceStatusError	INTEGER

Defined Values

wrSwitchMIB		1.3.6.1.4.1.96.100
White Rabbit Switch internal details
MODULE-IDENTITY

cern		1.3.6.1.4.1.96
OBJECT IDENTIFIER

wrsScalar		1.3.6.1.4.1.96.100.1
OBJECT IDENTIFIER

wrsStatus		1.3.6.1.4.1.96.100.6
OBJECT IDENTIFIER

wrsExpertStatus		1.3.6.1.4.1.96.100.7
OBJECT IDENTIFIER

wrsScalarOne		1.3.6.1.4.1.96.100.1.1
Integer incremented at every GET
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

wrsGeneralStatusGroup		1.3.6.1.4.1.96.100.6.1
OBJECT IDENTIFIER

wrsMainSystemStatus		1.3.6.1.4.1.96.100.6.1.1
Grouped status of WRS switch ok - other objects in wrsGeneralStatusGroup are ok error - there is an error in wrsGeneralStatusGroup warning - there is a warning in wrsGeneralStatusGroup warningNA - there is N/A field in wrsGeneralStatusGroup bug - bug in checking conditions of wrsGeneralStatusGroup, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsOSStatus		1.3.6.1.4.1.96.100.6.1.2
Grouped status of wrsOSStatusGroup ok - values in wrsOSStatusGroup are ok error - there is an error in wrsOSStatusGroup warning - there is a warning in wrsOSStatusGroup warningNA - there is N/A field in wrsOSStatusGroup bug - bug in checking conditions of wrsOSStatusGroup, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsTimingStatus		1.3.6.1.4.1.96.100.6.1.3
Grouped status of wrsTimingStatusGroup ok - values in wrsTimingStatusGroup are ok error - there is an error in wrsTimingStatusGroup warning - there is a warning in wrsTimingStatusGroup warningNA - there is N/A field in wrsTimingStatusGroup bug - bug in checking conditions of wrsTimingStatusGroup, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsNetworkingStatus		1.3.6.1.4.1.96.100.6.1.4
Grouped status of wrsNetworkingStatusGroup ok - values in wrsNetworkingStatusGroup are ok error - there is an error in wrsNetworkingStatusGroup warning - there is a warning in wrsNetworkingStatusGroup warningNA - there is N/A field in wrsNetworkingStatusGroup bug - bug in checking conditions of wrsNetworkingStatusGroup, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsDetailedStatusesGroup		1.3.6.1.4.1.96.100.6.2
OBJECT IDENTIFIER

wrsOSStatusGroup		1.3.6.1.4.1.96.100.6.2.1
OBJECT IDENTIFIER

wrsBootSuccessful		1.3.6.1.4.1.96.100.6.2.1.1
Grouped status of wrsBootStatusGroup, indicating whether boot was successful ok - values in wrsBootStatusGroup are correct error - there is an error in wrsBootStatusGroup warning - there is a warning in wrsBootStatusGroup warningNA - there is N/A field in wrsBootStatusGroup bug - bug in checking conditions of wrsBootStatusGroup, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsTemperatureWarning		1.3.6.1.4.1.96.100.6.2.1.2
Warning if temperature exceed threshold levels
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), thresholdNotSet(1), temperatureOK(2), temperatureTooHigh(3)

wrsMemoryFreeLow		1.3.6.1.4.1.96.100.6.2.1.3
Status of free memory. Based on wrsMemoryGroup. Error - more than 80% memory used Warning - more than 50% memory used
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4)

wrsCpuLoadHigh		1.3.6.1.4.1.96.100.6.2.1.4
Status of CPU load. Based on average load in group wrsCpuLoad. Error - average CPU load is more than 3 for 1min, 2 for 5min or 1.5 for 15min Warning - average CPU load is more than 2 for 1min, 1.5 for 5min or 1 for 15min
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3)

wrsDiskSpaceLow		1.3.6.1.4.1.96.100.6.2.1.5
Status of used disk space. Based on wrsDiskTable. Error - more than 90% of any disk is used Warning - more than 80% of any disk is used
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4)

wrsTimingStatusGroup		1.3.6.1.4.1.96.100.6.2.2
OBJECT IDENTIFIER

wrsPTPStatus		1.3.6.1.4.1.96.100.6.2.2.1
Grouped status of PTP daemon based on values in wrsPtpDataTable ok - Correct values in wrsPtpDataTable error - error in wrsPtpDataTable firstRead - unable to calculate deltas in first read
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), firstRead(6)

wrsSoftPLLStatus		1.3.6.1.4.1.96.100.6.2.2.2
Grouped status of Soft PLL based on values in wrsSpllState ok - values in wrsSpllState are correct error - there is an error in wrsSpllState warning - there is a warning in wrsSpllState warningNA - there is N/A field in wrsSpllState bug - bug in checking conditions of wrsSpllState, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsSlaveLinksStatus		1.3.6.1.4.1.96.100.6.2.2.3
Grouped status of slave link statuses ok - all links have proper status error - wrong link status of at least one link warningNA - there is N/A in one of object used to calculate this value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warningNA(4)

wrsPTPFramesFlowing		1.3.6.1.4.1.96.100.6.2.2.4
Grouped status of TX and RX PTP packets flowing ok - when there are PTP packets flowing in both directions on all wr ports that are up warningNA - there is N/A in one of object used to calculate this value error - no PTP packets flowing on at least one wr up port firstRead - cannot calculate value from only one read
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warningNA(4), firstRead(6)

wrsSystemClockStatus		1.3.6.1.4.1.96.100.6.2.2.5
Grouped status of system clock ok - system clock is withing threshold (set in WRS configuration) to NTP time and correct leap seconds file was loaded error - system clock problem, either it diverged or incorrect leap seconds file is used warning - leapseconds file is not valid anymore and should be updated warningNA - some information could not be retrieved to calculate the value of this object
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4)

wrsNetworkingStatusGroup		1.3.6.1.4.1.96.100.6.2.3
OBJECT IDENTIFIER

wrsSFPsStatus		1.3.6.1.4.1.96.100.6.2.3.1
Grouped status of SFPs ok - all SFPs are ok error - there is an error in SFP warningNA - there is N/A in one of object used to calculate this value bug - bug in checking conditions of SFPs, please report
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warning(3), warningNA(4), bug(5)

wrsEndpointStatus		1.3.6.1.4.1.96.100.6.2.3.2
Grouped status of all endpoints ok - all endpoints are ok error - erro in at least one endpoint firstRead - cannot calculate value from only one read
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), firstRead(6)

wrsSwcoreStatus		1.3.6.1.4.1.96.100.6.2.3.3
Overall status of Soft Core. ok - correct Soft Core status error - erroneous Soft Core status firstRead - cannot calculate value from only one read
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), firstRead(6)

wrsRTUStatus		1.3.6.1.4.1.96.100.6.2.3.4
RTU status ok - correct RTU status error - erroneous RTU status firstRead - cannot calculate value from only one read
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), firstRead(6)

wrsVersionGroup		1.3.6.1.4.1.96.100.6.3
OBJECT IDENTIFIER

wrsVersionSwVersion		1.3.6.1.4.1.96.100.6.3.1
The software version, as returned from 'git describe' at build time
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionSwBuildBy		1.3.6.1.4.1.96.100.6.3.2
The software build by, as returned from 'git config --get-all user.name' at build time
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionSwBuildDate		1.3.6.1.4.1.96.100.6.3.3
The build date of the software, '__DATE__' at build time
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionBackplaneVersion		1.3.6.1.4.1.96.100.6.3.4
The hardware version of minibackplane PCB
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionFpgaType		1.3.6.1.4.1.96.100.6.3.5
The hardware type of FPGA
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionManufacturer		1.3.6.1.4.1.96.100.6.3.6
The name of the manufacturing company of the switch
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionSwitchSerialNumber		1.3.6.1.4.1.96.100.6.3.7
The serial number (or string) of the switch
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionScbVersion		1.3.6.1.4.1.96.100.6.3.8
The version of the SCB (switch's motherboard)
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionGwVersion		1.3.6.1.4.1.96.100.6.3.9
The version of gateware (FPGA bitstream)
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionGwBuild		1.3.6.1.4.1.96.100.6.3.10
The build ID of gateware (FPGA bitstream)
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionSwitchHdlCommitId		1.3.6.1.4.1.96.100.6.3.11
The gateware version: commit ID of wr_switch_hdl
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionGeneralCoresCommitId		1.3.6.1.4.1.96.100.6.3.12
The gateware version: commit of general-cores
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionWrCoresCommitId		1.3.6.1.4.1.96.100.6.3.13
The gateware version: commit of wr-cores
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsVersionLastUpdateDate		1.3.6.1.4.1.96.100.6.3.14
Date and time of last firmware update, this information may not be accurate, due to hard restarts or lack of proper time at update.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsOperationStatus		1.3.6.1.4.1.96.100.7.1
OBJECT IDENTIFIER

wrsCurrentTimeGroup		1.3.6.1.4.1.96.100.7.1.1
OBJECT IDENTIFIER

wrsDateTAI		1.3.6.1.4.1.96.100.7.1.1.1
The current time, in TAI seconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsDateTAIString		1.3.6.1.4.1.96.100.7.1.1.2
The current TAI time, printed as %y-%m-%d-%H:%M:%S (no time zone)
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsSystemClockStatusDetails		1.3.6.1.4.1.96.100.7.1.1.3
The system clock is compared to NTP time ok - system clock is under the threshold value thresholdExceeded - system clock has exceeded the threshold value IOError - IO error detected (error) unknownStatus - Unexpected status (error) error - Error detected warningNA - there is N/A in one of object used to calculate this value
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), thresholdExceeded(2), ntpError(3), error(4), ioError(5), unknownStatus(6)

wrsSystemClockDrift		1.3.6.1.4.1.96.100.7.1.1.4
Drift of system clock expressed in seconds
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsSystemClockDriftThreshold		1.3.6.1.4.1.96.100.7.1.1.5
Threshold level in seconds for system clock drift
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsSystemClockCheckInterval		1.3.6.1.4.1.96.100.7.1.1.6
Check interval of system clock drift. The unit is given by wrsSystemClockCheckIntervalUnit object.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsSystemClockCheckIntervalUnit		1.3.6.1.4.1.96.100.7.1.1.7
System clock check interval unit (see wrsSystemClockCheckInterval) seconds - System clock check interval expressed in seconds minutes - System clock check interval expressed in minutes days - System clock check interval expressed in number of days
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), error(1), minutes(2), hours(3), days(4)

wrsLeapSecSource		1.3.6.1.4.1.96.100.7.1.1.8
Source leap second file (leap-seconds.list) local - The local file is used tryRemote - Try to download the file, if it fails do not propagate error forceRemote - Try to download the file, if it fails the error is propagated errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), error(1), errorMinor(2), local(3), tryRemote(4), forceRemote(5)

wrsLeapSecStatusDetails		1.3.6.1.4.1.96.100.7.1.1.9
Leap second status ok - Everything ok leapSecFileExpired - The current leap second file is out-dated internalErrorDetected - Internal error detected (system,...) taiReadError - Cannot read the TAI time leaSecInserted - A leap second will be inserted at 00:00 leapSecDeleted - A leap second will be deleted at 00:00 errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), statusFileMissing(2), unknownStatus(3), leapSecFileExpired(4), internalErrorDetected(5), taiReadError(6), leaSecInserted(7), leapSecDeleted(8)

wrsLeapSecSourceStatusDetails		1.3.6.1.4.1.96.100.7.1.1.10
Download status of the leap seconds file ok - Everything is OK updated - Local leap seconds file has been updated dhcpError - DHCP error detected invalidUrl - The URL is not reachable or invalid invalidFile - The download file is invalid downloadError - Error detected during the download errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), statusFileMissing(2), unknownStatus(3), updated(4), dhcpError(5), invalidUrl(6), invalidFile(7), downloadError(8)

wrsLeapSecSourceURL		1.3.6.1.4.1.96.100.7.1.1.11
Url to the leap second file
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

wrsBootStatusGroup		1.3.6.1.4.1.96.100.7.1.2
OBJECT IDENTIFIER

wrsBootCnt		1.3.6.1.4.1.96.100.7.1.2.1
Number of switch's boots since power-on
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsRebootCnt		1.3.6.1.4.1.96.100.7.1.2.2
The number of soft reboots. This is incremented by the reboot system call. A healthy system should feature one soft-reboot less than total boots.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsRestartReason		1.3.6.1.4.1.96.100.7.1.2.3
Reason of last switch restart. error(1) - unable to read restart reason or reset counters generalReset(2) - Both VDDCORE and VDDBU rising (power-on) wakeUpReset(3) - VDDCORE rising watchdogReset(4) - Watchdog fault occurred softwareReset(5) - Processor reset required by the software (system reboot) userReset(6) - NRST pin detected low (reset button) restartByMonit(7) - Restart caused by Monit, please check wrsRestartReasonMonit for program that caused problems
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), error(1), generalReset(2), wakeUpReset(3), watchdogReset(4), softwareReset(5), userReset(6), restartByMonit(7)

wrsFaultIP		1.3.6.1.4.1.96.100.7.1.2.4
The fault address of the last panic. This is the instruction pointer normally printed by the stack backtrace. The register is zeroed at first boot and only modified within panic.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

wrsFaultLR		1.3.6.1.4.1.96.100.7.1.2.5
The link register register at last panic. This is usually the caller of the function that failed, but it may be a local register if the failing function saved lr to the stack and used it as a scratch register.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(4)

wrsConfigSource		1.3.6.1.4.1.96.100.7.1.2.6
Source of used dotconfig local - used dot-config was stored on the switch remote - dot-config retrieved from the network check the wrsConfigSourceUrl for the path tryDhcp - try to get URL to the dot-config via DHCP, if DHCP retrieve fail do not propagate error to the wrsBootSuccessful; forceDhcp - get URL to the dot-config via DHCP, if failed propagate error to the wrsBootSuccessful errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), error(1), errorMinor(2), local(3), remote(4), tryDhcp(5), forceDhcp(6)

wrsConfigSourceUrl		1.3.6.1.4.1.96.100.7.1.2.7
Url to the dot-config
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

wrsRestartReasonMonit		1.3.6.1.4.1.96.100.7.1.2.8
Program's name which caused the monit to restart the switch due to too many crashes.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsBootConfigStatus		1.3.6.1.4.1.96.100.7.1.2.9
Result of loading or downloading dot-config file ok - dot-config downloaded or loaded correctly downloadError - unable to download a file from a given source checkError - config file is not valid or too short (less than 200 characters). errorMinor - cannot read the status file, problem is probably somewhere else dhcpError - unable to get URL to dot-config via DHCP (only for forceDhcp)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), downloadError(3), checkError(4), errorMinor(5), dhcpError(6)

wrsBootHwinfoReadout		1.3.6.1.4.1.96.100.7.1.2.10
Result of hwinfo readout ok - hwinfo readout successful error - hwinfo readout failed errorMinor - cannot read status file, problem is probably somewhere else warning - no hwinfo partition
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), errorMinor(3), warning(4)

wrsBootLoadFPGA		1.3.6.1.4.1.96.100.7.1.2.11
Result of loading FPGA ok - FPGA loaded successfully error - loading failed errorMinor - cannot read status file, problem is probably somewhere else fileNotFound - file to be loaded not found
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), errorMinor(3), fileNotFound(4)

wrsBootLoadLM32		1.3.6.1.4.1.96.100.7.1.2.12
Result of loading LM32 ok - LM32 loaded successfully error - loading failed errorMinor - cannot read status file, problem is probably somewhere else fileNotFound - file to be loaded not found
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), errorMinor(3), fileNotFound(4)

wrsBootKernelModulesMissing		1.3.6.1.4.1.96.100.7.1.2.13
Checking if all desired kernel modules are loaded. allKernelModulesPresent - all modules loaded other numbers represent number of modules not loaded other errors (like unable to open /proc/modules) are reported as maximum number of missing modules
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	allKernelModulesPresent(0)

wrsBootUserspaceDaemonsMissing		1.3.6.1.4.1.96.100.7.1.2.14
Checking if all desired daemons are running. allDaemonsPresent - all daemons running other numbers represent number of daemons not running other errors (can be: unable to run ps command or problem with multiple process instances) are reported as maximum number of missing modules
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	allDaemonsPresent(0)

wrsGwWatchdogTimeouts		1.3.6.1.4.1.96.100.7.1.2.15
Number of times the watchdog has restarted the HDL module responsible for the Ethernet switching process.
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsFwUpdateStatus		1.3.6.1.4.1.96.100.7.1.2.16
Status of the last firmware update. ok - Update successful checksumError - firmware checksum error
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), checksumError(2)

wrsCustomBootScriptSource		1.3.6.1.4.1.96.100.7.1.2.17
Source of the custom boot script local - used custom boot script was stored on the switch remote - custom boot script was retrieved from the network; check the wrsCustomBootScriptSourceUrl for the path disabled - do not run custom boot script errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), error(1), errorMinor(2), local(3), remote(4), disabled(5)

wrsCustomBootScriptSourceUrl		1.3.6.1.4.1.96.100.7.1.2.18
Url to the custom boot script
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..128)

wrsCustomBootScriptStatus		1.3.6.1.4.1.96.100.7.1.2.19
The result of execution of the custom boot script ok - custom boot script executed successfully failed - custom boot script failed during execution wrongSrc - no valid source of the custom boot script present in dot-config downloadError - unable to download a file from a given source disabled - do not run custom boot script error - unsupported status errorMinor - cannot read the status file, problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), failed(2), wrongSrc(3), downloadError(4), disabled(5), error(6), errorMinor(7)

wrsAuxClkSetStatus		1.3.6.1.4.1.96.100.7.1.2.20
Result of setting up auxclk on connector clk2 ok - successful set pu of the auxclk failed - error while setting up the auxclk disabled - the setting up of the auxclk disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), failed(2), disabled(3), error(4), errorMinor(5)

wrsThrottlingSetStatus		1.3.6.1.4.1.96.100.7.1.2.21
Result of setting up a limit on the Rx bandwidth of the traffic that goes from WR ports to Linux. ok - successful set up of the throttling failed - error while setting up the throttling disabled - the setting up of the throttling disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), failed(2), disabled(3), error(4), errorMinor(5)

wrsVlansSetStatus		1.3.6.1.4.1.96.100.7.1.2.22
Result of setting up VLANs ok - successful set up of VLANs failed - error while setting up VLANs disabled - the setting up of VLANs disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), failed(2), disabled(3), error(4), errorMinor(5)

wrsTemperatureGroup		1.3.6.1.4.1.96.100.7.1.3
OBJECT IDENTIFIER

wrsTempFPGA		1.3.6.1.4.1.96.100.7.1.3.1
FPGA temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempPLL		1.3.6.1.4.1.96.100.7.1.3.2
PLL temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempPSL		1.3.6.1.4.1.96.100.7.1.3.3
Power Supply Left (PSL) temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempPSR		1.3.6.1.4.1.96.100.7.1.3.4
Power Supply Right (PSR) temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempThresholdFPGA		1.3.6.1.4.1.96.100.7.1.3.5
Threshold level for FPGA temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempThresholdPLL		1.3.6.1.4.1.96.100.7.1.3.6
Threshold level for PLL temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempThresholdPSL		1.3.6.1.4.1.96.100.7.1.3.7
Threshold level for Power Supply Left (PSL) temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsTempThresholdPSR		1.3.6.1.4.1.96.100.7.1.3.8
Threshold level for Power Supply Right (PSR) temperature
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsMemoryGroup		1.3.6.1.4.1.96.100.7.1.4
OBJECT IDENTIFIER

wrsMemoryTotal		1.3.6.1.4.1.96.100.7.1.4.1
Ram size in kB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsMemoryUsed		1.3.6.1.4.1.96.100.7.1.4.2
Used RAM in kB (Cache and buffers are not counted)
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsMemoryUsedPerc		1.3.6.1.4.1.96.100.7.1.4.3
Percentage of used RAM
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsMemoryFree		1.3.6.1.4.1.96.100.7.1.4.4
Free RAM in kB
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsCpuLoadGroup		1.3.6.1.4.1.96.100.7.1.5
OBJECT IDENTIFIER

wrsCPULoadAvg1min		1.3.6.1.4.1.96.100.7.1.5.1
Load average over 1min multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsCPULoadAvg5min		1.3.6.1.4.1.96.100.7.1.5.2
Load average over 5min multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsCPULoadAvg15min		1.3.6.1.4.1.96.100.7.1.5.3
Load average over 15min multiplied by 100
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsDiskTable		1.3.6.1.4.1.96.100.7.1.6
Information for each mounted partition
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsDiskEntry

wrsDiskEntry		1.3.6.1.4.1.96.100.7.1.6.1
An entry containing partitions' details
Status: current	Access: not-accessible
OBJECT-TYPE
	WrsDiskEntry

wrsDiskIndex		1.3.6.1.4.1.96.100.7.1.6.1.1
Index for wrsDiskTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsDiskMountPath		1.3.6.1.4.1.96.100.7.1.6.1.2
Mount patch of reported partition
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsDiskSize		1.3.6.1.4.1.96.100.7.1.6.1.3
Partition size
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsDiskUsed		1.3.6.1.4.1.96.100.7.1.6.1.4
Used space on partition
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsDiskFree		1.3.6.1.4.1.96.100.7.1.6.1.5
Free space on partition
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsDiskUseRate		1.3.6.1.4.1.96.100.7.1.6.1.6
Percentage of used space on partition
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsDiskFilesystem		1.3.6.1.4.1.96.100.7.1.6.1.7
Filesystem reported by df command
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

wrsStartCntGroup		1.3.6.1.4.1.96.100.7.2
OBJECT IDENTIFIER

wrsStartCntHAL		1.3.6.1.4.1.96.100.7.2.1
Number of HAL daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntPTP		1.3.6.1.4.1.96.100.7.2.2
Number of PTP daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntRTUd		1.3.6.1.4.1.96.100.7.2.3
Number of RTU daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntSshd		1.3.6.1.4.1.96.100.7.2.4
Number of SSH daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntHttpd		1.3.6.1.4.1.96.100.7.2.5
Number of HTTP daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntSnmpd		1.3.6.1.4.1.96.100.7.2.6
Number of SNMP daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntSyslogd		1.3.6.1.4.1.96.100.7.2.7
Number of SYSLOG daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntWrsWatchdog		1.3.6.1.4.1.96.100.7.2.8
Number of wrs_watchdog daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntLldpd		1.3.6.1.4.1.96.100.7.2.9
Number of LLDP daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsStartCntLdap		1.3.6.1.4.1.96.100.7.2.10
Number of LDAP daemon starts
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsSpllState		1.3.6.1.4.1.96.100.7.3
OBJECT IDENTIFIER

wrsSpllVersionGroup		1.3.6.1.4.1.96.100.7.3.1
OBJECT IDENTIFIER

wrsSpllVersion		1.3.6.1.4.1.96.100.7.3.1.1
The Soft PLL version, as returned from 'git describe' at build time
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsSpllBuildDate		1.3.6.1.4.1.96.100.7.3.1.2
The build date of the Soft PLL, '__DATE__' at build time
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsSpllBuildBy		1.3.6.1.4.1.96.100.7.3.1.3
The build by of the Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsSpllStatusGroup		1.3.6.1.4.1.96.100.7.3.2
OBJECT IDENTIFIER

wrsSpllMode		1.3.6.1.4.1.96.100.7.3.2.1
Mode of Soft PLL (values taken from softpll_export.h, wrpc-sw repo)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), grandmaster(1), master(2), slave(3), disabled(4)

wrsSpllIrqCnt		1.3.6.1.4.1.96.100.7.3.2.2
Number of interrupts in Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsSpllSeqState		1.3.6.1.4.1.96.100.7.3.2.3
Sequence state of Soft PLL (values taken from file softpll_export.h, wrpc-sw repo)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	startExt(1), waitExt(2), startHelper(3), waitHelper(4), startMain(5), waitMain(6), disabled(7), ready(8), clearDacs(9), waitClearDacs(10)

wrsSpllAlignState		1.3.6.1.4.1.96.100.7.3.2.4
Align state of Soft PLL (values taken from file softpll_export.h, wrpc-sw repo)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	extOff(0), start(1), initCsync(2), waitCsync(3), waitSample(4), compensateDelay(5), locked(6), startAlignment(7), startMain(8), waitClkIn(9), waitPlock(10)

wrsSpllHlock		1.3.6.1.4.1.96.100.7.3.2.5
HLock in Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsSpllMlock		1.3.6.1.4.1.96.100.7.3.2.6
MLock at Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsSpllHY		1.3.6.1.4.1.96.100.7.3.2.7
H_y at Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsSpllMY		1.3.6.1.4.1.96.100.7.3.2.8
M_y at Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsSpllDelCnt		1.3.6.1.4.1.96.100.7.3.2.9
Del counter at Soft PLL
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsTable		1.3.6.1.4.1.96.100.7.4
Pstats counters for each port
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsPstatsEntry

wrsPstatsEntry		1.3.6.1.4.1.96.100.7.4.1
An entry containing pstats counters
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	WrsPstatsEntry

wrsPstatsIndex		1.3.6.1.4.1.96.100.7.4.1.1
Index for wrsPstatsTable
Status: deprecated	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPstatsPortName		1.3.6.1.4.1.96.100.7.4.1.2
Port name of port
Status: deprecated	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPstatsTXUnderrun		1.3.6.1.4.1.96.100.7.4.1.3
Number of TX underrun errors
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXOverrun		1.3.6.1.4.1.96.100.7.4.1.4
Number of RX overrun errors
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXInvalidCode		1.3.6.1.4.1.96.100.7.4.1.5
Number of received invalid 8B10B code errors
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXSyncLost		1.3.6.1.4.1.96.100.7.4.1.6
Number of RX link synchronization lost
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPauseFrames		1.3.6.1.4.1.96.100.7.4.1.7
Number of received pause frames
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPfilterDropped		1.3.6.1.4.1.96.100.7.4.1.8
Number of received frames dropped at pfilter
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPCSErrors		1.3.6.1.4.1.96.100.7.4.1.9
Number of errors occurred during frame reception in PCS
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXGiantFrames		1.3.6.1.4.1.96.100.7.4.1.10
Number of received giant frames (bigger than Maximum Receive Unit)
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXRuntFrames		1.3.6.1.4.1.96.100.7.4.1.11
Number of received runt frames (smaller than 64bytes)
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXCRCErrors		1.3.6.1.4.1.96.100.7.4.1.12
Number of RX CRC errors
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass0		1.3.6.1.4.1.96.100.7.4.1.13
Number of received frames assigned to class 0 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass1		1.3.6.1.4.1.96.100.7.4.1.14
Number of received frames assigned to class 1 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass2		1.3.6.1.4.1.96.100.7.4.1.15
Number of received frames assigned to class 2 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass3		1.3.6.1.4.1.96.100.7.4.1.16
Number of received frames assigned to class 3 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass4		1.3.6.1.4.1.96.100.7.4.1.17
Number of received frames assigned to class 4 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass5		1.3.6.1.4.1.96.100.7.4.1.18
Number of received frames assigned to class 5 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass6		1.3.6.1.4.1.96.100.7.4.1.19
Number of received frames assigned to class 6 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPclass7		1.3.6.1.4.1.96.100.7.4.1.20
Number of received frames assigned to class 7 by packet filter in endpoint
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsTXFrames		1.3.6.1.4.1.96.100.7.4.1.21
Number of transmitted frames
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXFrames		1.3.6.1.4.1.96.100.7.4.1.22
Number of received frames
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXDropRTUFull		1.3.6.1.4.1.96.100.7.4.1.23
Number of RX frames dropped due to RTU full
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio0		1.3.6.1.4.1.96.100.7.4.1.24
Number of RX frames at internal priority 0
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio1		1.3.6.1.4.1.96.100.7.4.1.25
Number of RX frames at internal priority 1
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio2		1.3.6.1.4.1.96.100.7.4.1.26
Number of RX frames at internal priority 2
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio3		1.3.6.1.4.1.96.100.7.4.1.27
Number of RX frames at internal priority 3
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio4		1.3.6.1.4.1.96.100.7.4.1.28
Number of RX frames at internal priority 4
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio5		1.3.6.1.4.1.96.100.7.4.1.29
Number of RX frames at internal priority 5
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio6		1.3.6.1.4.1.96.100.7.4.1.30
Number of RX frames at internal priority 6
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRXPrio7		1.3.6.1.4.1.96.100.7.4.1.31
Number of RX frames at internal priority 7
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRTUValid		1.3.6.1.4.1.96.100.7.4.1.32
Number of valid RTU requests
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRTUResponses		1.3.6.1.4.1.96.100.7.4.1.33
Number of valid RTU responses
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsRTUDropped		1.3.6.1.4.1.96.100.7.4.1.34
Number of frames dropped at RTU
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsFastMatchPriority		1.3.6.1.4.1.96.100.7.4.1.35
Number of priority frames matched by fast match
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsFastMatchFastForward		1.3.6.1.4.1.96.100.7.4.1.36
Number of forwarded frames matched by fast match
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsFastMatchNonForward		1.3.6.1.4.1.96.100.7.4.1.37
Number of not forwarded frames matched by fast match
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsFastMatchRespValid		1.3.6.1.4.1.96.100.7.4.1.38
Number of fast match decisions
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsFullMatchRespValid		1.3.6.1.4.1.96.100.7.4.1.39
Number of full match decisions
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsForwarded		1.3.6.1.4.1.96.100.7.4.1.40
Number of forwarded frames
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPstatsTRURespValid		1.3.6.1.4.1.96.100.7.4.1.41
Number of TRU decisions
Status: deprecated	Access: read-only
OBJECT-TYPE
	Counter32

wrsPtpDataTable		1.3.6.1.4.1.96.100.7.5
Information for each ptp servo
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsPtpDataEntry

wrsPtpDataEntry		1.3.6.1.4.1.96.100.7.5.1
An entry containing ptp servo statuses
Status: current	Access: not-accessible
OBJECT-TYPE
	WrsPtpDataEntry

wrsPtpDataIndex		1.3.6.1.4.1.96.100.7.5.1.1
Index for wrsPtpDataTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPtpPortName		1.3.6.1.4.1.96.100.7.5.1.2
Port name on which servo instance is running
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPtpGrandmasterID		1.3.6.1.4.1.96.100.7.5.1.3
The ClockID of the current grandmaster
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

wrsPtpOwnID		1.3.6.1.4.1.96.100.7.5.1.4
The ClockID of this WR device
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

wrsPtpMode		1.3.6.1.4.1.96.100.7.5.1.5
The mode of this clock
Status: obsolete	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), grandmaster(1), master(2), slave(3)

wrsPtpServoState		1.3.6.1.4.1.96.100.7.5.1.6
The servo state if slave
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsPtpServoStateN		1.3.6.1.4.1.96.100.7.5.1.7
Numeric representation of servo state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	uninitialized(0), syncNsec(1), syncSec(2), syncPhase(3), trackPhase(4), waitOffsetStable(5), standardPTP(99)

wrsPtpPhaseTracking		1.3.6.1.4.1.96.100.7.5.1.8
Whether phase tracking is enabled in the servo
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), notTracking(1), tracking(2)

wrsPtpSyncSource		1.3.6.1.4.1.96.100.7.5.1.9
The interface name that is currently the synchronization source
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsPtpClockOffsetPs		1.3.6.1.4.1.96.100.7.5.1.10
Absolute value of current clock offset from master, in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpClockOffsetPsHR		1.3.6.1.4.1.96.100.7.5.1.11
Human Readable current clock offset from master, in picoseconds with saturation to integer
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpSkew		1.3.6.1.4.1.96.100.7.5.1.12
The estimated change of master-to-slave delay, in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpRTT		1.3.6.1.4.1.96.100.7.5.1.13
The round-trip-time, from master, in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpLinkLength		1.3.6.1.4.1.96.100.7.5.1.14
Estimated fiber length, from master-to-slave delay, in meters
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

wrsPtpServoUpdates		1.3.6.1.4.1.96.100.7.5.1.15
How many time did the servo run
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPtpDeltaTxM		1.3.6.1.4.1.96.100.7.5.1.16
Fixed Tx latency on Master side
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpDeltaRxM		1.3.6.1.4.1.96.100.7.5.1.17
Fixed Rx latency on Master side
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpDeltaTxS		1.3.6.1.4.1.96.100.7.5.1.18
Fixed Tx latency on Slave side
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpDeltaRxS		1.3.6.1.4.1.96.100.7.5.1.19
Fixed Rx latency on Slave side
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpServoStateErrCnt		1.3.6.1.4.1.96.100.7.5.1.20
Number of servo updates with wrong servo state
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPtpClockOffsetErrCnt		1.3.6.1.4.1.96.100.7.5.1.21
Number of servo updates with wrong clock offset
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPtpRTTErrCnt		1.3.6.1.4.1.96.100.7.5.1.22
Number of servo updates with wrong RTT
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPtpServoUpdateTime		1.3.6.1.4.1.96.100.7.5.1.23
TAI Nanosecond of the last servo's update
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpServoExt		1.3.6.1.4.1.96.100.7.5.1.24
Extension with which the servo runs.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), none(1), wr(2), l1Sync(3)

wrsPortStatusTable		1.3.6.1.4.1.96.100.7.6
Information for each port
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsPortStatusEntry

wrsPortStatusEntry		1.3.6.1.4.1.96.100.7.6.1
An entry containing ports statuses
Status: current	Access: not-accessible
OBJECT-TYPE
	WrsPortStatusEntry

wrsPortStatusIndex		1.3.6.1.4.1.96.100.7.6.1.1
Index for wrsPortStatusTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPortStatusPortName		1.3.6.1.4.1.96.100.7.6.1.2
Name of port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPortStatusLink		1.3.6.1.4.1.96.100.7.6.1.3
Whether the link is up or down
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), down(1), up(2)

wrsPortStatusConfiguredMode		1.3.6.1.4.1.96.100.7.6.1.4
Whether the port is configured as master, slave, non-wr or auto
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(0), master(1), slave(2), nonWr(3), auto(4), none(5)

wrsPortStatusLocked		1.3.6.1.4.1.96.100.7.6.1.5
Whether the peers are locked or not
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), notLocked(1), locked(2)

wrsPortStatusPeer		1.3.6.1.4.1.96.100.7.6.1.6
the ClockID of the peer, if available. Or 0
Status: obsolete	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

wrsPortStatusSfpVN		1.3.6.1.4.1.96.100.7.6.1.7
Vendor Name of SFP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsPortStatusSfpPN		1.3.6.1.4.1.96.100.7.6.1.8
Part Number of SFP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsPortStatusSfpVS		1.3.6.1.4.1.96.100.7.6.1.9
Vendor serial number of SFP
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

wrsPortStatusSfpInDB		1.3.6.1.4.1.96.100.7.6.1.10
Whether the SFP is in data base or not
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), notInDataBase(1), inDataBase(2)

wrsPortStatusSfpGbE		1.3.6.1.4.1.96.100.7.6.1.11
Whether the SFP is 1 GbE
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), linkNotGbE(1), linkGbE(2)

wrsPortStatusSfpError		1.3.6.1.4.1.96.100.7.6.1.12
Problem with SFP configuration. Port has to be always 1GbE. Port has to be in data base as long as support WR.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), sfpOk(1), sfpError(2), portDown(3)

wrsPortStatusPtpTxFrames		1.3.6.1.4.1.96.100.7.6.1.13
Number of transmitted PTP frames per port (for all PPSI instances running on particular port
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPortStatusPtpRxFrames		1.3.6.1.4.1.96.100.7.6.1.14
Number of received PTP frames per port (for all PPSI instances running on particular port
Status: current	Access: read-only
OBJECT-TYPE
	Counter32

wrsPortStatusMonitor		1.3.6.1.4.1.96.100.7.6.1.15
If disable, SNMP will not generate any errors for this port.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), enable(1), disable(2)

wrsPortStatusSfpDom		1.3.6.1.4.1.96.100.7.6.1.16
SFP plugged into a given port has extra monitoring (DOM) capabilities.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), enable(1), disable(2), domNotSupported(3)

wrsPortStatusSfpTemp		1.3.6.1.4.1.96.100.7.6.1.17
Temperature reported by SFP. According to SFF-8472, accuracy of this value must be better than 3 degrees Celsius
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusSfpVcc		1.3.6.1.4.1.96.100.7.6.1.18
Internally measured transceiver supply voltage reported by SFP. According to SFF-8472, accuracy of this value must be better than 3%
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusSfpTxBias		1.3.6.1.4.1.96.100.7.6.1.19
Measured TX bias current in uA reported by SFP. According to SFF-8472, accuracy of this value must be better than 10%
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusSfpTxPower		1.3.6.1.4.1.96.100.7.6.1.20
Measured TX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB%
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusSfpRxPower		1.3.6.1.4.1.96.100.7.6.1.21
Measured RX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB%
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusT24p		1.3.6.1.4.1.96.100.7.6.1.22
T2/T4 phase transition point used for Rx timestamps correction
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPortStatusT24pValid		1.3.6.1.4.1.96.100.7.6.1.23
Validity of wrsPortStatusT24p
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	invalid(0), readFromConfig(1)

wrsPstatsHCTable		1.3.6.1.4.1.96.100.7.7
Pstats counters for each port
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsPstatsHCEntry

wrsPstatsHCEntry		1.3.6.1.4.1.96.100.7.7.1
An entry containing pstats counters
Status: current	Access: not-accessible
OBJECT-TYPE
	WrsPstatsHCEntry

wrsPstatsHCIndex		1.3.6.1.4.1.96.100.7.7.1.1
Index for wrsPstatsHCTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPstatsHCPortName		1.3.6.1.4.1.96.100.7.7.1.2
Port name of port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPstatsHCTXUnderrun		1.3.6.1.4.1.96.100.7.7.1.3
Number of TX underrun errors
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXOverrun		1.3.6.1.4.1.96.100.7.7.1.4
Number of RX overrun errors
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXInvalidCode		1.3.6.1.4.1.96.100.7.7.1.5
Number of received invalid 8B10B code errors
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXSyncLost		1.3.6.1.4.1.96.100.7.7.1.6
Number of RX link synchronization lost
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPauseFrames		1.3.6.1.4.1.96.100.7.7.1.7
Number of received pause frames
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPfilterDropped		1.3.6.1.4.1.96.100.7.7.1.8
Number of received frames dropped at pfilter
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPCSErrors		1.3.6.1.4.1.96.100.7.7.1.9
Number of errors occurred during frame reception in PCS
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXGiantFrames		1.3.6.1.4.1.96.100.7.7.1.10
Number of received giant frames (bigger than Maximum Receive Unit)
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXRuntFrames		1.3.6.1.4.1.96.100.7.7.1.11
Number of received runt frames (smaller than 64bytes)
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXCRCErrors		1.3.6.1.4.1.96.100.7.7.1.12
Number of RX CRC errors
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass0		1.3.6.1.4.1.96.100.7.7.1.13
Number of received frames assigned to class 0 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass1		1.3.6.1.4.1.96.100.7.7.1.14
Number of received frames assigned to class 1 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass2		1.3.6.1.4.1.96.100.7.7.1.15
Number of received frames assigned to class 2 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass3		1.3.6.1.4.1.96.100.7.7.1.16
Number of received frames assigned to class 3 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass4		1.3.6.1.4.1.96.100.7.7.1.17
Number of received frames assigned to class 4 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass5		1.3.6.1.4.1.96.100.7.7.1.18
Number of received frames assigned to class 5 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass6		1.3.6.1.4.1.96.100.7.7.1.19
Number of received frames assigned to class 6 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPclass7		1.3.6.1.4.1.96.100.7.7.1.20
Number of received frames assigned to class 7 by packet filter in endpoint
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCTXFrames		1.3.6.1.4.1.96.100.7.7.1.21
Number of transmitted frames
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXFrames		1.3.6.1.4.1.96.100.7.7.1.22
Number of received frames
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXDropRTUFull		1.3.6.1.4.1.96.100.7.7.1.23
Number of RX frames dropped due to RTU full
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio0		1.3.6.1.4.1.96.100.7.7.1.24
Number of RX frames at internal priority 0
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio1		1.3.6.1.4.1.96.100.7.7.1.25
Number of RX frames at internal priority 1
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio2		1.3.6.1.4.1.96.100.7.7.1.26
Number of RX frames at internal priority 2
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio3		1.3.6.1.4.1.96.100.7.7.1.27
Number of RX frames at internal priority 3
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio4		1.3.6.1.4.1.96.100.7.7.1.28
Number of RX frames at internal priority 4
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio5		1.3.6.1.4.1.96.100.7.7.1.29
Number of RX frames at internal priority 5
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio6		1.3.6.1.4.1.96.100.7.7.1.30
Number of RX frames at internal priority 6
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRXPrio7		1.3.6.1.4.1.96.100.7.7.1.31
Number of RX frames at internal priority 7
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRTUValid		1.3.6.1.4.1.96.100.7.7.1.32
Number of valid RTU requests
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRTUResponses		1.3.6.1.4.1.96.100.7.7.1.33
Number of valid RTU responses
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCRTUDropped		1.3.6.1.4.1.96.100.7.7.1.34
Number of frames dropped at RTU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCFastMatchPriority		1.3.6.1.4.1.96.100.7.7.1.35
Number of priority frames matched by fast match
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCFastMatchFastForward		1.3.6.1.4.1.96.100.7.7.1.36
Number of forwarded frames matched by fast match
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCFastMatchNonForward		1.3.6.1.4.1.96.100.7.7.1.37
Number of not forwarded frames matched by fast match
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCFastMatchRespValid		1.3.6.1.4.1.96.100.7.7.1.38
Number of fast match decisions
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCFullMatchRespValid		1.3.6.1.4.1.96.100.7.7.1.39
Number of full match decisions
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCForwarded		1.3.6.1.4.1.96.100.7.7.1.40
Number of forwarded frames
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCTRURespValid		1.3.6.1.4.1.96.100.7.7.1.41
Number of TRU decisions
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPstatsHCNICTXFrames		1.3.6.1.4.1.96.100.7.7.1.42
Number of TX frames coming from CPU
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceTable		1.3.6.1.4.1.96.100.7.8
Pstats counters for each port
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		WrsPtpInstanceEntry

wrsPtpInstanceEntry		1.3.6.1.4.1.96.100.7.8.1
An entry containing pstats counters
Status: current	Access: not-accessible
OBJECT-TYPE
	WrsPtpInstanceEntry

wrsPtpInstancePortIndex		1.3.6.1.4.1.96.100.7.8.1.1
Index for wrsPtpInstanceTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPtpInstanceOnPortIndex		1.3.6.1.4.1.96.100.7.8.1.2
Index for wrsPtpInstanceTable
Status: current	Access: not-accessible
OBJECT-TYPE
	Unsigned32

wrsPtpInstanceName		1.3.6.1.4.1.96.100.7.8.1.3
Name of an instance
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPtpInstancePort		1.3.6.1.4.1.96.100.7.8.1.4
Port number on which an instance is running
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpInstancePortInstance		1.3.6.1.4.1.96.100.7.8.1.5
Index of an instance running on a port
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpInstancePortName		1.3.6.1.4.1.96.100.7.8.1.6
Port name of port
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..12)

wrsPtpInstanceState		1.3.6.1.4.1.96.100.7.8.1.7
Name of instance
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9)

wrsPtpInstanceMasterOnly		1.3.6.1.4.1.96.100.7.8.1.8
MasterOnly feature enabled/disabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), disabled(1), enabled(2)

wrsPtpInstanceExtPortCfgDesSt		1.3.6.1.4.1.96.100.7.8.1.9
DesiredState to be used if/when externalPortConfiguration feature is enabled
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), initializing(1), faulty(2), disabled(3), listening(4), preMaster(5), master(6), passive(7), uncalibrated(8), slave(9)

wrsPtpInstanceMechanism		1.3.6.1.4.1.96.100.7.8.1.10
Delay Mechanism type used by PTP Instance
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), e2e(1), p2p(2), commonP2P(3), special(4), noMechanism(254)

wrsPtpInstanceProfile		1.3.6.1.4.1.96.100.7.8.1.11
Profile/Extension configured on a PTP Instance
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), defaultPTP(1), whiteRabbit(2), highAccuracy(3), custom(4)

wrsPtpInstanceExtension		1.3.6.1.4.1.96.100.7.8.1.12
Extension used on the PTP Instance
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), none(1), whiteRabbit(2), l1Sync(3)

wrsPtpInstanceAsymEnabled		1.3.6.1.4.1.96.100.7.8.1.13
Asymmetry Corrections enabled/disabled on the PTP Instance
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), disabled(1), enabled(2)

wrsPtpInstanceAsymConstAsymPS		1.3.6.1.4.1.96.100.7.8.1.14
Constant Asymmetry in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceAsymScDelayCoef		1.3.6.1.4.1.96.100.7.8.1.15
Scaled Relative Delay Coefficient
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceAsymScDelayCoefHR		1.3.6.1.4.1.96.100.7.8.1.16
Relative Delay Coefficient in a floating form
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..64)

wrsPtpInstanceTSCorrEgressLatPS		1.3.6.1.4.1.96.100.7.8.1.17
Egress Latency (Tx Fixed Delay) in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceTSCorrIngLatPS		1.3.6.1.4.1.96.100.7.8.1.18
Ingress Latency (Rx Fixed Delay) in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceTSCorrSemistLatPS		1.3.6.1.4.1.96.100.7.8.1.19
Semi-static latency (bitslide) in picoseconds
Status: current	Access: read-only
OBJECT-TYPE
	Counter64

wrsPtpInstanceProtoDetectState		1.3.6.1.4.1.96.100.7.8.1.20
Protocol detection state
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), none(1), pWaitMsg(2), pDetection(3), pDetected(4), pFailure(5)

wrsPtpInstanceExtState		1.3.6.1.4.1.96.100.7.8.1.21
State of PTP extension (more than one are allowed per 1 physical port)
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), disabled(1), active(2), ptp(3)

wrsPtpInstancePeerMac		1.3.6.1.4.1.96.100.7.8.1.22
MAC used by an instance
Status: current	Access: read-only
OBJECT-TYPE
	PhysAddress

wrsPtpInstancePeerVid		1.3.6.1.4.1.96.100.7.8.1.23
VID used by an instance
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpInstanceVlanNum		1.3.6.1.4.1.96.100.7.8.1.24
Number of VLANs used by an instance
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

wrsPtpInstanceVlanListStr		1.3.6.1.4.1.96.100.7.8.1.25
Comma separated list of VLANs used by an instance
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..160)

wrsPtpInstanceStatusError		1.3.6.1.4.1.96.100.7.8.1.26
PTP instance status error ok - all SFPs are ok error - there is an error in SFP warningNA - at least one field is equal to 0 (NA), shouldn't happen in normal operation
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	na(0), ok(1), error(2), warningNA(3)