Vct-Loopdetect-59-MIB

File: Vct-Loopdetect-59-MIB.mib (10476 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
RFC1155-SMI RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
experimental Integer32 Unsigned32
Counter32 MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP enterprises MacAddress
RowStatus mgmt NetworkAddress
IpAddress Counter Gauge
ifIndex

Defined Types

DisplayString  
OCTET STRING    

VctEntry  
SEQUENCE    
  vctIfindex Integer32
  vctSetIfindex INTEGER
  cableStatus INTEGER
  doubleCableStatus1-2 INTEGER
  doubleCableStatus3-6 INTEGER
  doubleCableStatus4-5 INTEGER
  doubleCableStatus7-8 INTEGER
  doubleCableLength1-2 INTEGER
  doubleCableLength3-6 INTEGER
  doubleCableLength4-5 INTEGER
  doubleCableLength7-8 INTEGER

LoopdetectEntry  
SEQUENCE    
  loopdetectPortIfindex Integer32
  loopdetectPortOperStatus INTEGER
  loopdetectPortControl INTEGER
  loopdetectPortVid OCTET STRING
  loopdetectPortFlag INTEGER
  loopdetectPortProtectFlag INTEGER
  loopdetectPortReopenTime Integer32
  loopdetectVlan Integer32

Defined Values

zte 1.3.6.1.4.1.3902
OBJECT IDENTIFIER    

zxr10 1.3.6.1.4.1.3902.3
OBJECT IDENTIFIER    

zxr10switch 1.3.6.1.4.1.3902.3.102
OBJECT IDENTIFIER    

switch59vct 1.3.6.1.4.1.3902.3.102.24
OBJECT IDENTIFIER    

switch59loopdetect 1.3.6.1.4.1.3902.3.102.25
OBJECT IDENTIFIER    

vctTable 1.3.6.1.4.1.3902.3.102.24.1
The vctTable contains the parameter of cable.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VctEntry

vctEntry 1.3.6.1.4.1.3902.3.102.24.1.1
The parameter list of cable.
Status: current Access: not-accessible
OBJECT-TYPE    
  VctEntry  

vctIfindex 1.3.6.1.4.1.3902.3.102.24.1.1.1
The ifindex of port,it is same to ifindex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

vctSetIfindex 1.3.6.1.4.1.3902.3.102.24.1.1.2
The ifindex of port, which need to be checked.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

cableStatus 1.3.6.1.4.1.3902.3.102.24.1.1.3
The status of cable, either good or fault.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(1), fault(0)  

doubleCableStatus1-2 1.3.6.1.4.1.3902.3.102.24.1.1.4
The status of cable pair 1-2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus3-6 1.3.6.1.4.1.3902.3.102.24.1.1.5
The status of cable pair 3-6.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus4-5 1.3.6.1.4.1.3902.3.102.24.1.1.6
The status of cable pair 4-5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableStatus7-8 1.3.6.1.4.1.3902.3.102.24.1.1.7
The status of cable pair 7-8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER good(0), open(1), short(2), broken(3), mismatch(4), fail(5), unknown(6), null(7)  

doubleCableLength1-2 1.3.6.1.4.1.3902.3.102.24.1.1.8
The length of cable pair 1-2.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength3-6 1.3.6.1.4.1.3902.3.102.24.1.1.9
The length of cable pair 3-6.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength4-5 1.3.6.1.4.1.3902.3.102.24.1.1.10
The length of cable pair 4-5.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

doubleCableLength7-8 1.3.6.1.4.1.3902.3.102.24.1.1.11
The length of cable pair 7-8.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER lessthan50(200), from50to80(201), from80to110(202), from110to140(203), morethan140(204), unknow(205), null(206)  

loopdetectReopenTime 1.3.6.1.4.1.3902.3.102.25.1
The max time when the loopdetected port is
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16777216  

loopdetectTable 1.3.6.1.4.1.3902.3.102.25.2
The parameter which the loopdetectTable contains.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    LoopdetectEntry

loopdetectEntry 1.3.6.1.4.1.3902.3.102.25.2.1
The parameter list shows the happened loopdetect.
Status: current Access: not-accessible
OBJECT-TYPE    
  LoopdetectEntry  

loopdetectPortIfindex 1.3.6.1.4.1.3902.3.102.25.2.1.1
The index of port, it is same to ifindex.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32  

loopdetectPortOperStatus 1.3.6.1.4.1.3902.3.102.25.2.1.2
The status of the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(0)  

loopdetectPortControl 1.3.6.1.4.1.3902.3.102.25.2.1.3
The loopdetect protocol enable/disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

loopdetectPortVid 1.3.6.1.4.1.3902.3.102.25.2.1.4
The vlan which the loopdetect port belong to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

loopdetectPortFlag 1.3.6.1.4.1.3902.3.102.25.2.1.5
The result of loopdetect on the port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

loopdetectPortProtectFlag 1.3.6.1.4.1.3902.3.102.25.2.1.6
The loopdetect protect in the port is enable/disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

loopdetectPortReopenTime 1.3.6.1.4.1.3902.3.102.25.2.1.7
How long the port will be opened
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

loopdetectVlan 1.3.6.1.4.1.3902.3.102.25.2.1.8
The vlan contains the port which happened loopdetect.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..4094  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor