UBQS-SYSTEM-MIB

File: UBQS-SYSTEM-MIB.mib (18092 bytes)

Imported modules

RFC1155-SMI RFC-1212 SNMPv2-TC
UBQS-SMI

Imported symbols

IpAddress Integer32 OBJECT-TYPE
DisplayString PhysAddress ubiMgmtv2

Defined Types

UbiSysRedundancyInfoEntry  
SEQUENCE    
  ubiSCURedundancyRole INTEGER
  ubiSCUPosition INTEGER
  ubiSCUMngLinkStatus INTEGER
  ubiSCUIpAddress IpAddress
  ubiSCUPeerEquipStatus INTEGER

UbiSysBarcodePowerEntry  
SEQUENCE    
  ubiSysBarcodePowerIndex INTEGER
  ubiSysBarcodePowerString DisplayString

UbiSysBarcodeFanEntry  
SEQUENCE    
  ubiSysBarcodeFanIndex INTEGER
  ubiSysBarcodeFanString DisplayString

UbiSysBarcodeUplinkEntry  
SEQUENCE    
  ubiSysBarcodeUplinkIndex INTEGER
  ubiSysBarcodeUplinkString DisplayString

UbiSysBarcodeSlotEntry  
SEQUENCE    
  ubiSysBarcodeSlotIndex INTEGER
  ubiSysBarcodeSlotString DisplayString

UbiSysBarcodeScuEntry  
SEQUENCE    
  ubiSysBarcodeScuIndex INTEGER
  ubiSysBarcodeScuString DisplayString

Defined Values

ubiSystemMIB 1.3.6.1.4.1.7800.100.1
The UBQS-SYSTEM-MIB is used to get the system information.
MODULE-IDENTITY    

ubiSystemMIBObjects 1.3.6.1.4.1.7800.100.1.1
OBJECT IDENTIFIER    

ubiSystemMIBNotificationPrefix 1.3.6.1.4.1.7800.100.1.2
OBJECT IDENTIFIER    

ubiSystemMIBConformance 1.3.6.1.4.1.7800.100.1.3
OBJECT IDENTIFIER    

ubiSysInfo 1.3.6.1.4.1.7800.100.1.1.2
OBJECT IDENTIFIER    

ubiSysRedundancy 1.3.6.1.4.1.7800.100.1.1.7
OBJECT IDENTIFIER    

ubiSysTimeZone 1.3.6.1.4.1.7800.100.1.1.2.8
OBJECT IDENTIFIER    

ubiSysBanner 1.3.6.1.4.1.7800.100.1.1.2.9
OBJECT IDENTIFIER    

ubiSysLedTest 1.3.6.1.4.1.7800.100.1.1.6
OBJECT IDENTIFIER    

ubiSysBarCode 1.3.6.1.4.1.7800.100.1.1.8
OBJECT IDENTIFIER    

ubiSysReset 1.3.6.1.4.1.7800.100.1.1.1
Reset the system.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER reset(1)  

ubiSysModel 1.3.6.1.4.1.7800.100.1.1.2.1
The object identifier for the manufacturer model.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OBJECT IDENTIFIER  

ubiHwVersion 1.3.6.1.4.1.7800.100.1.1.2.2
Hardware version of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSwVersion 1.3.6.1.4.1.7800.100.1.1.2.3
Software version of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiReleaseDate 1.3.6.1.4.1.7800.100.1.1.2.4
The date of release for system OS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSerialNumber 1.3.6.1.4.1.7800.100.1.1.2.5
Serial number of the system.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysPhysAddress 1.3.6.1.4.1.7800.100.1.1.2.6
System mac address
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

ubiSysClock 1.3.6.1.4.1.7800.100.1.1.2.7
Current local time of the system. Clock SET: HH:MM:SS - Current Time <1-31> - Day of the month MONTH - Month of the year (First three letters of the month) <1993-2035> - Year SET Example 13:10:00 3 Jan 2010
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

ubiShelfPhysAddress 1.3.6.1.4.1.7800.100.1.1.2.10
System shelf mac address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  PhysAddress  

ubiBspVersion 1.3.6.1.4.1.7800.100.1.1.2.11
System Bsp Versoin.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysResetReason 1.3.6.1.4.1.7800.100.1.1.2.12
System Reset Reason.
Status: mandatory Access: accessible-for-notify
OBJECT-TYPE    
  DisplayString  

ubiSysTimeZoneName 1.3.6.1.4.1.7800.100.1.1.2.8.1
System timezone name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ubiSysTimeZoneOffset 1.3.6.1.4.1.7800.100.1.1.2.8.2
System timezone offset(Hours:Minutes).
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ubiSysBannerLogin 1.3.6.1.4.1.7800.100.1.1.2.9.1
null string -> no banner login 'default' -> banner login default STRING -> banner login WORD
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ubiSysBannerMotd 1.3.6.1.4.1.7800.100.1.1.2.9.2
null string -> no banner motd 'default' -> banner motd default STRING -> banner motd WORD
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

ubiSysRedundancyInfoTable 1.3.6.1.4.1.7800.100.1.1.7.1
Table of redundancy information
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysRedundancyInfoEntry

ubiSysRedundancyInfoEntry 1.3.6.1.4.1.7800.100.1.1.7.1.1
Entry of redundancy information
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysRedundancyInfoEntry  

ubiSCURedundancyRole 1.3.6.1.4.1.7800.100.1.1.7.1.1.1
SCU role
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), standby(2)  

ubiSCUPosition 1.3.6.1.4.1.7800.100.1.1.7.1.1.2
SCU postion
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER left(1), right(2)  

ubiSCUMngLinkStatus 1.3.6.1.4.1.7800.100.1.1.7.1.1.3
mng port status of SCU
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER down(0), up(1)  

ubiSCUIpAddress 1.3.6.1.4.1.7800.100.1.1.7.1.1.4
IP address of SCU
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

ubiSCUPeerEquipStatus 1.3.6.1.4.1.7800.100.1.1.7.1.1.5
Peer Equip status of SCU
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unequip(0), equip(1)  

ubiSysRedundancyReload 1.3.6.1.4.1.7800.100.1.1.7.2
Reload Active and/or Standby
Status: current Access: write-only
OBJECT-TYPE    
  INTEGER reload-peer(1), reload-shelf(2)  

ubiSysRedundancyPeerImage 1.3.6.1.4.1.7800.100.1.1.7.3
Peer boot image
Status: current Access: write-only
OBJECT-TYPE    
  DisplayString  

ubiLedTestTimeout 1.3.6.1.4.1.7800.100.1.1.6.1
The timeout to terminate the LED Test. If the timeout is zero, that is set to default.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..300  

ubiLedTestTrigger 1.3.6.1.4.1.7800.100.1.1.6.2
Trigger and stop the LED Test.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), testing(1), stop(2)  

ubiLedTestSlotId 1.3.6.1.4.1.7800.100.1.1.6.3
LED test Slot id
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

ubiSysBarcodeSystem 1.3.6.1.4.1.7800.100.1.1.8.1
OBJECT IDENTIFIER    

ubiSysBarcodeSystemString 1.3.6.1.4.1.7800.100.1.1.8.1.1
The textual barcode of system.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysBarcodePowerTable 1.3.6.1.4.1.7800.100.1.1.8.2
This table contains information for power barcode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysBarcodePowerEntry

ubiSysBarcodePowerEntry 1.3.6.1.4.1.7800.100.1.1.8.2.1
Barcode Information about the power.
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysBarcodePowerEntry  

ubiSysBarcodePowerIndex 1.3.6.1.4.1.7800.100.1.1.8.2.1.1
A unique value for each power entity
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ubiSysBarcodePowerString 1.3.6.1.4.1.7800.100.1.1.8.2.1.2
The textual barcode of power entity
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysBarcodeFanTable 1.3.6.1.4.1.7800.100.1.1.8.3
This table contains information for fan barcode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysBarcodeFanEntry

ubiSysBarcodeFanEntry 1.3.6.1.4.1.7800.100.1.1.8.3.1
Barcode Information about the fan
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysBarcodeFanEntry  

ubiSysBarcodeFanIndex 1.3.6.1.4.1.7800.100.1.1.8.3.1.1
A unique value for each fan entity
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ubiSysBarcodeFanString 1.3.6.1.4.1.7800.100.1.1.8.3.1.2
The textual barcode of fan entity.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysBarcodeUplinkTable 1.3.6.1.4.1.7800.100.1.1.8.4
This table contains information for uplink module's barcode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysBarcodeUplinkEntry

ubiSysBarcodeUplinkEntry 1.3.6.1.4.1.7800.100.1.1.8.4.1
Barcode Information about the uplink module.
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysBarcodeUplinkEntry  

ubiSysBarcodeUplinkIndex 1.3.6.1.4.1.7800.100.1.1.8.4.1.1
A unique value for each uplink module.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ubiSysBarcodeUplinkString 1.3.6.1.4.1.7800.100.1.1.8.4.1.2
The textual barcode of uplink module.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysBarcodeSlotTable 1.3.6.1.4.1.7800.100.1.1.8.5
This table contains information for slot's barcode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysBarcodeSlotEntry

ubiSysBarcodeSlotEntry 1.3.6.1.4.1.7800.100.1.1.8.5.1
Barcode Information about the slot.
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysBarcodeSlotEntry  

ubiSysBarcodeSlotIndex 1.3.6.1.4.1.7800.100.1.1.8.5.1.1
A unique value for each slot.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ubiSysBarcodeSlotString 1.3.6.1.4.1.7800.100.1.1.8.5.1.2
The textual barcode of slot.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysBarcodeScuTable 1.3.6.1.4.1.7800.100.1.1.8.6
This table contains information for SCU's barcode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UbiSysBarcodeScuEntry

ubiSysBarcodeScuEntry 1.3.6.1.4.1.7800.100.1.1.8.6.1
Barcode Information about the SCU.
Status: current Access: not-accessible
OBJECT-TYPE    
  UbiSysBarcodeScuEntry  

ubiSysBarcodeScuIndex 1.3.6.1.4.1.7800.100.1.1.8.6.1.1
A unique value for each SCU.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ubiSysBarcodeScuString 1.3.6.1.4.1.7800.100.1.1.8.6.1.2
The textual barcode of SCU.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

ubiSysMIBCompliances 1.3.6.1.4.1.7800.100.1.3.1
OBJECT IDENTIFIER    

ubiSysMIBGroups 1.3.6.1.4.1.7800.100.1.3.2
OBJECT IDENTIFIER    

ubiSysMIBCompliance 1.3.6.1.4.1.7800.100.1.3.1.1
The compliance statement for entities which implement the Ubiquoss system MIB.
Status: current Access: read-only
MODULE-COMPLIANCE    

ubiSysInfoMIBGroup 1.3.6.1.4.1.7800.100.1.3.2.1
The collection of objects which are used to get the system information
Status: current Access: read-only
OBJECT-GROUP    

ubiSysRscMIBGroup 1.3.6.1.4.1.7800.100.1.3.2.2
The collection of objects which are used to manager the system resource
Status: current Access: read-only
OBJECT-GROUP    

ubiSysMiscGroup 1.3.6.1.4.1.7800.100.1.3.2.3
The collection of objects which are used to manager the miscellaneous information of system.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor