UBQS-CONFIG-MIB
File:
UBQS-CONFIG-MIB.mib (17955 bytes)
Imported modules
Imported symbols
Defined Types
ConfigMethodType
Represents 'copy '.
each source method has possible destination methods.
The mapping list below:
source | destination
===================================================
startup-config | running-config
| ftp
| tftp
---------------------------------------------------
running-config | startup-config
| ftp
| tftp
| flash
| usbflash
---------------------------------------------------
ftp | startup-config
| running-config
| flash
| config-file
---------------------------------------------------
tftp | startup-config
| running-config
| flash
| config-file
---------------------------------------------------
flash | ftp
| tftp
| flash
| usbflash
---------------------------------------------------
usbflash | flash
| usbflash
---------------------------------------------------
TEXTUAL-CONVENTION
INTEGER
noMethod(0), startupConfig(1), runningConfig(2), ftp(3), tftp(4), flash(5), usbFlash(6), configFile(7)
UbiConfigInfoEntry
SEQUENCE
ubiConfigName
DisplayString
ubiConfigType
INTEGER
ubiConfigCurrentStatus
INTEGER
ubiConfigNextStatus
INTEGER
UbiUsbConfigInfoEntry
SEQUENCE
ubiUsbPartNum
Integer32
ubiUsbConfigName
DisplayString
ubiUsbConfigType
INTEGER
ubiUsbConfigCurrentStatus
INTEGER
ubiUsbConfigNextStatus
INTEGER
Defined Values
ubiConfigMIB
1.3.6.1.4.1.7800.100.18
This MIB module defines MIB objects which provide
mechanisms to remotely configure the parameters
used by an SNMP entity.
MODULE-IDENTITY
ubiConfigInfoTable
1.3.6.1.4.1.7800.100.18.1.1
The table of configuration file list
that consists of image and config
Status: current
Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
UbiConfigInfoEntry
ubiConfigInfoEntry
1.3.6.1.4.1.7800.100.18.1.1.1
The entry representing one element of configuration file list
Status: current
Access: not-accessible
OBJECT-TYPE
UbiConfigInfoEntry
ubiConfigName
1.3.6.1.4.1.7800.100.18.1.1.1.1
Configuration file name or image name
Status: current
Access: read-only
OBJECT-TYPE
DisplayString
ubiConfigType
1.3.6.1.4.1.7800.100.18.1.1.1.2
Configuration type
config : configuration file
image : image file
other : other type file
Status: current
Access: read-only
OBJECT-TYPE
INTEGER
other(0), config(1), image(2)
ubiConfigCurrentStatus
1.3.6.1.4.1.7800.100.18.1.1.1.3
Current configuration file status
Status: current
Access: read-only
OBJECT-TYPE
INTEGER
noCurrent(0), currentConfig(1)
ubiConfigNextStatus
1.3.6.1.4.1.7800.100.18.1.1.1.4
Next configuration file status
Status: current
Access: read-write
OBJECT-TYPE
INTEGER
noNext(0), nextConfig(1)
ubiConfigEraseMode
1.3.6.1.4.1.7800.100.18.1.2.1
The type of object to be erased.
To erase a file, value must be 1, 2 or 3.
fileInFlash means config and image file at system flash and
fileInUsbFlash means config and image file at USB flash.
Status: current
Access: read-write
OBJECT-TYPE
INTEGER
noMode(0), startupConfig(1), fileInFlash(2), fileInUsbFlash(3)
ubiConfigEraseFileName
1.3.6.1.4.1.7800.100.18.1.2.2
If mode is 'configFile', configuration file name to be erased.
startupConfig doesn't need this object
Status: current
Access: read-write
OBJECT-TYPE
DisplayString
ubiConfigEraseOperate
1.3.6.1.4.1.7800.100.18.1.2.3
Excute to erase configuration
Status: current
Access: read-write
OBJECT-TYPE
INTEGER
none(0), excute(1)
ubiConfigEraseUsbPartNum
1.3.6.1.4.1.7800.100.18.1.2.4
The number of USB flash partition which has a file to be erase.
This object is only for when ubiConfigEraseMode is 'fileInUsbFlash'.
Status: current
Access: read-write
OBJECT-TYPE
Integer32
0..9
ubiConfigSourceMethod
1.3.6.1.4.1.7800.100.18.1.3.1
configuration source control method
Represents 'copy '.
each source method has possible destination methods.
The mapping list below:
source | destination
===================================================
startup-config | running-config
| ftp
| tftp
---------------------------------------------------
running-config | startup-config
| ftp
| tftp
| flash
| usbflash
---------------------------------------------------
ftp | startup-config
| running-config
| flash
| config-file
---------------------------------------------------
tftp | startup-config
| running-config
| flash
| config-file
---------------------------------------------------
flash | ftp
| tftp
| flash
| usbflash
---------------------------------------------------
usbflash | flash
| usbflash
---------------------------------------------------
Status: current
Access: read-write
OBJECT-TYPE
ConfigMethodType
ubiConfigDestinationMethod
1.3.6.1.4.1.7800.100.18.1.3.7
configuration destination control method
Represents 'copy '.
each source method has possible destination methods.
The mapping list below:
source | destination
===================================================
startup-config | running-config
| ftp
| tftp
---------------------------------------------------
running-config | startup-config
| ftp
| tftp
| flash
| usbflash
---------------------------------------------------
ftp | startup-config
| running-config
| flash
---------------------------------------------------
tftp | startup-config
| running-config
| flash
---------------------------------------------------
flash | ftp
| tftp
| flash
| usbflash
---------------------------------------------------
usbflash | flash
| usbflash
---------------------------------------------------
Status: current
Access: read-write
OBJECT-TYPE
ConfigMethodType
ubiConfigCopyOperate
1.3.6.1.4.1.7800.100.18.1.3.13
excute to copy configuration
Status: current
Access: read-write
OBJECT-TYPE
INTEGER
none(0), excute(1)
ubiUsbConfigInfoTable
1.3.6.1.4.1.7800.100.18.1.4
The table of configuration file list
that consists of image and config at usbflash
Status: current
Access: not-accessible
OBJECT-TYPE
SEQUENCE OF
UbiUsbConfigInfoEntry
ubiUsbConfigInfoEntry
1.3.6.1.4.1.7800.100.18.1.4.1
The entry representing one element of configuration file list at usbflash
Status: current
Access: not-accessible
OBJECT-TYPE
UbiUsbConfigInfoEntry
ubiUsbPartNum
1.3.6.1.4.1.7800.100.18.1.4.1.1
The file system partition number for USB flash.
Status: current
Access: read-only
OBJECT-TYPE
Integer32
0..9
ubiUsbConfigName
1.3.6.1.4.1.7800.100.18.1.4.1.2
Configuration file name or image name
Status: current
Access: read-only
OBJECT-TYPE
DisplayString
ubiUsbConfigType
1.3.6.1.4.1.7800.100.18.1.4.1.3
Configuration type
config : configuration file
image : image file
other : other type file
Status: current
Access: read-only
OBJECT-TYPE
INTEGER
other(0), config(1), image(2)
ubiUsbConfigCurrentStatus
1.3.6.1.4.1.7800.100.18.1.4.1.4
Current configuration file status
Status: current
Access: read-only
OBJECT-TYPE
INTEGER
noCurrent(0), currentConfig(1)
ubiUsbConfigNextStatus
1.3.6.1.4.1.7800.100.18.1.4.1.5
Next configuration file status
Status: current
Access: read-write
OBJECT-TYPE
INTEGER
noNext(0), nextConfig(1)
ubiConfigMIBCompliance
1.3.6.1.4.1.7800.100.18.2.1.1
The compliance statement for entities which implement
the ubiquoss system configuration MIB.
Status: current
Access: read-write
MODULE-COMPLIANCE
ubiConfigMIBGroup
1.3.6.1.4.1.7800.100.18.2.2.1
ubiquoss system configuration.
Status: current
Access: read-write
OBJECT-GROUP
ubiConfigMIBNotifGroup
1.3.6.1.4.1.7800.100.18.2.2.2
A notification group providing alarm notification
for system configuration.
Status: current
Access: read-write
NOTIFICATION-GROUP