TROPIC-ACCESSPORT-MIB

File: TROPIC-ACCESSPORT-MIB.mib (36038 bytes)

Imported modules

SNMP-FRAMEWORK-MIB	SNMPv2-SMI	SNMPv2-CONF
SNMPv2-TC	IF-MIB	TROPIC-TC
TROPIC-GLOBAL-REG

Imported symbols

SnmpAdminString	OBJECT-TYPE	MODULE-IDENTITY
IpAddress	Unsigned32	Integer32
MODULE-COMPLIANCE	OBJECT-GROUP	TruthValue
InterfaceIndex	ifIndex	ifEntry
InterfaceIndexOrZero	TropicOperationalCapabilityType	TropicStateQualifierType
TropicLEDColorType	TropicLEDStateType	TnCommand
AluWdmTnIfType	tnPortModules	tnAccessPortMIB

Defined Types

TnAccessPortEntry
SEQUENCE
	tnAccessPortDescr	SnmpAdminString
	tnAccessPortStatusLEDColor	TropicLEDColorType
	tnAccessPortStatusLEDState	TropicLEDStateType
	tnAccessPortOperationalCapability	TropicOperationalCapabilityType
	tnAccessPortStateQualifier	TropicStateQualifierType
	tnAccessPortFarEndAddress	SnmpAdminString
	tnAccessPortFarEndIfIndex	InterfaceIndexOrZero
	tnAccessPortFarEndType	INTEGER
	tnAccessPortDirection	INTEGER
	tnAccessPortAINS	TruthValue
	tnAccessPortAINSDebounceTime	Integer32
	tnAccessPortUsingSysAINSDebounceTime	TruthValue
	tnAccessPortAINSDebounceTimeRemaining	Unsigned32
	tnAccessPortIsDomainEdgePort	TruthValue
	tnAccessPortFarEndAddressConnFrom	SnmpAdminString
	tnAccessPortFarEndIfIndexConnFrom	InterfaceIndexOrZero
	tnAccessPortFarEndTypeConnFrom	INTEGER
	tnAccessPortExtAmpIpAddressIn	IpAddress
	tnAccessPortExtAmpIpAddressOut	IpAddress
	tnAccessPortWtocmConnLoss	Integer32
	tnAccessPortWtocmConnAddress	InterfaceIndexOrZero
	tnAccessPortOppDirectionPortAddress	InterfaceIndexOrZero
	tnAccessPortIsValidInternalOTSXcEndpoint	TruthValue
	tnAccessPortWtDomainNumber	Integer32
	tnAccessPortHasMpoConnector	TruthValue
	tnAccessPortMpoConnectorPortOutIfIndex	InterfaceIndexOrZero
	tnAccessPortMpoConnectorPortInIfIndex	InterfaceIndexOrZero
	tnAccessPortIsMpo	TruthValue
	tnAccessPortMonOcmConnAddress	InterfaceIndexOrZero
	tnAccessPortAlmProfName	OCTET STRING
	tnAccessPortmfcTemperature	Integer32
	tnAccessPortmfcNominalPressure	Integer32
	tnAccessPortmfcDifferentialPressure	Integer32

TnIfEntry
SEQUENCE
	tnIfPhysicalLocation	InterfaceIndex
	tnIfType	AluWdmTnIfType
	tnIfSupportedTypes	BITS
	tnIfSupportedTypesAlternate	OCTET STRING
	tnIfForceAdminStatus	TnCommand

Defined Values

tnAccessPortMibModules		1.3.6.1.4.1.7483.1.1.2.2.4.1
DWDM system port MIB attributes.
MODULE-IDENTITY

tnAccessPortConf		1.3.6.1.4.1.7483.2.2.4.1.1
OBJECT IDENTIFIER

tnAccessPortGroups		1.3.6.1.4.1.7483.2.2.4.1.1.1
OBJECT IDENTIFIER

tnAccessPortCompliances		1.3.6.1.4.1.7483.2.2.4.1.1.2
OBJECT IDENTIFIER

tnAccessPortObjs		1.3.6.1.4.1.7483.2.2.4.1.2
OBJECT IDENTIFIER

tnAccessPortScalarObjs		1.3.6.1.4.1.7483.2.2.4.1.2.3
OBJECT IDENTIFIER

tnSysTopology		1.3.6.1.4.1.7483.2.2.4.1.2.3.1
OBJECT IDENTIFIER

tnAccessPortTable		1.3.6.1.4.1.7483.2.2.4.1.2.1
The 1696R/1830 NE port table.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnAccessPortEntry

tnAccessPortEntry		1.3.6.1.4.1.7483.2.2.4.1.2.1.1
The ports on a card.
Status: current	Access: not-accessible
OBJECT-TYPE
	TnAccessPortEntry

tnAccessPortDescr		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.1
Access port description.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..255)

tnAccessPortStatusLEDColor		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.2
The color of the status LED.
Status: current	Access: read-only
OBJECT-TYPE
	TropicLEDColorType

tnAccessPortStatusLEDState		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.3
The state of the status LED.
Status: current	Access: read-only
OBJECT-TYPE
	TropicLEDStateType

tnAccessPortOperationalCapability		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.4
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	TropicOperationalCapabilityType

tnAccessPortStateQualifier		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.5
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	TropicStateQualifierType

tnAccessPortFarEndAddress		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.6
Access port far end address.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..64)

tnAccessPortFarEndIfIndex		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.7
Access port far end interface index.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortFarEndType		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.8
Access port far end type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	notConnected(1), internal(2), external(3), interCompound(5), cluster(6)

tnAccessPortDirection		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.9
Access port direction. Setting the direction to unidirectionalRx will turn off the Tx laser, and suppress Tx alarms (including out Wavelength Tracker alarms). Setting the direction to unidirectionalTx will suppress Rx alarms (including in Wavelength Tracker alarms).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	bidirectional(1), unidirectionalTx(2), unidirectionalRx(3)

tnAccessPortAINS		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.10
If the user has set Port AINS to true, the port admin state is set to up by the system. If the port admin state has been set up or down, Port AINS is set to false by the system, unless the user had specified admin up and Port AINS true. Disabling Port AINS against a client port of an OT card may result in disabling Port AINS against the line port of that OT card.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

tnAccessPortAINSDebounceTime		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.11
This attribute must be set in multiples of 60s. It is equal to System AINS Debounce Time when Port AINS Use System Default is true. Setting the Port AINS Debounce Time and Port AINS Use System Default to true in the same set request is restricted. Current configurable range: 1m to 96h 0m.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

tnAccessPortUsingSysAINSDebounceTime		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.12
Using System AINS Debounce Time. Sets with a value of false are restricted. The network operator must set Port AINS Debounce Time to some valid value to disable the use of System AINS Debounce Time. Setting the Port AINS Debounce Time and Port AINS Use System Default to true in the same set request is restricted.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

tnAccessPortAINSDebounceTimeRemaining		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.13
Number of seconds until the Port AINS DebounceTime expires. If Port AINS is false or Port AINS Debounce Time is 0, the value of this attribute will be 0.
Status: current	Access: read-only
OBJECT-TYPE
	Unsigned32

tnAccessPortIsDomainEdgePort		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.14
For discriminating between ports that are internal to a network composed of 1830 and 1696R network elements and the ports that are at the edge of the network so that the user knows where it is correct to terminate end-to-end connections.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

tnAccessPortFarEndAddressConnFrom		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.15
Access port far end address that points to this port.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(0..64)

tnAccessPortFarEndIfIndexConnFrom		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.16
Access port far end interface that points to this port.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortFarEndTypeConnFrom		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.17
Access port far end type.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	notConnected(1), internal(2), external(3), interCompound(5), cluster(6)

tnAccessPortExtAmpIpAddressIn		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.18
The IP address of an external amplifier connected to this port. This attribute is applicable to the line port of an LD card and is reserved for use with a RAMAN module.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

tnAccessPortExtAmpIpAddressOut		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.19
The IP address of an external amplifier connected from this port. This attribute is applicable to the line port of an LD card and is reserved for use with an EDFA module.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

tnAccessPortWtocmConnLoss		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.20
The insertion loss between the LD card MON port and the WTOCM input port. Current configurable range: 0 to 1500.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32

tnAccessPortWtocmConnAddress		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.21
LD card port connected to WTOCM input port in transmit direction.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortOppDirectionPortAddress		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.22
Address of opposite direction port when the TX and RX directions are split between two ports.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortIsValidInternalOTSXcEndpoint		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.23
Indicates if this is an end point of internal OT cross connect.
Status: current	Access: read-create
OBJECT-TYPE
	TruthValue

tnAccessPortWtDomainNumber		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.24
The numbered domain used for WT key selection for add XCs to this port; applies to external line facing ports. Current configurable range: -1 to 19.
Status: current	Access: read-create
OBJECT-TYPE
	Integer32	-1..19

tnAccessPortHasMpoConnector		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.25
Indicates if the logical port underlies a multi-fiber connector.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tnAccessPortMpoConnectorPortOutIfIndex		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.26
Provides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the out direction. Value of 0 indicates no MPO port.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortMpoConnectorPortInIfIndex		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.27
Provides the shelf/slot/port of the multi-fiber connector interface corresponding to this logical port in the in direction. Value of 0 indicates no MPO port.
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortIsMpo		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.28
Indicates if the port is itself a MPO port. Retrievable through SNMP for all ports, managed and MPO. True: The port is the port for the MPO connector. False: The port is not a port for a MPO connector, it is a managed port.
Status: current	Access: read-only
OBJECT-TYPE
	TruthValue

tnAccessPortMonOcmConnAddress		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.29
Port monitored by input or connected from output.
Status: current	Access: read-create
OBJECT-TYPE
	InterfaceIndexOrZero

tnAccessPortAlmProfName		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.30
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING

tnAccessPortmfcTemperature		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.31
The Ambient temperature applies to the sensor port of the MultiFunctional card.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tnAccessPortmfcNominalPressure		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.32
The nominal pressure applies to the sensor port of the MultiFunctional card.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tnAccessPortmfcDifferentialPressure		1.3.6.1.4.1.7483.2.2.4.1.2.1.1.33
The differential pressure applies to the sensor port of the MultiFunctional card.
Status: current	Access: read-only
OBJECT-TYPE
	Integer32

tnIfTable		1.3.6.1.4.1.7483.2.2.4.1.2.2
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TnIfEntry

tnIfEntry		1.3.6.1.4.1.7483.2.2.4.1.2.2.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	TnIfEntry

tnIfPhysicalLocation		1.3.6.1.4.1.7483.2.2.4.1.2.2.1.1
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	InterfaceIndex

tnIfType		1.3.6.1.4.1.7483.2.2.4.1.2.2.1.2
In a set request, value default indicates that the NE assigns the port automatically, if possible. A value of default will not be returned to the network operator. If tnIfType is set to unassigned and ifAdminStatus has also been set, the set request will be failed back to the network operator.
Status: current	Access: read-create
OBJECT-TYPE
	AluWdmTnIfType

tnIfSupportedTypes		1.3.6.1.4.1.7483.2.2.4.1.2.2.1.3
The supported types.
Status: current	Access: read-only
OBJECT-TYPE
	BITS	oc3(0), oc12(1), oc48(2), oc192(3), ots(4), och(5), otu1(6), otu2(7), gige(8), tenGige(9), stm1(10), stm4(11), stm16(12), stm64(13), fc1g(14), fc2g(15), fc4g(16), fc10g(17), cbr2g5(18), cbr10g(19), anyRate(20), hdSdi(21), fe(22), fddi(23), esCon(24), dvbAsi(25), dvi6000(26), otu3(27), oc768(28), stm256(29), otu4(30), fc8g(31), hundredGige(32), sdsdi(33), e1(34), sdi3g(35), dcn(36), evoa(37), fee(38), oduptf(39), ds1(40), otu3e2(41), otu2e(42), fortyGige(43), sdr(44), ddr(45), tod(46), lagGroup(47), otl44(48), fc16g(49), qdr(50), bits(51), oneTru(52), otu4x2(53), otu1f(54), cbr10g3(55), fortyGigeMLD(56), interLaken(57), otl410(58), otu4x4(59), otu4Half(60), otu4Halfx5(61), sensor(62)

tnIfSupportedTypesAlternate		1.3.6.1.4.1.7483.2.2.4.1.2.2.1.4
The supported types as an octet string.
Status: current	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(8)

tnIfForceAdminStatus		1.3.6.1.4.1.7483.2.2.4.1.2.2.1.5
Setting this attribute to execute will force an ifAdminStatus change. This works only for an ifAdminStatus of down. When queried, this attribute returns a value of noCmd.
Status: current	Access: read-create
OBJECT-TYPE
	TnCommand

tnSysTopologyAudit		1.3.6.1.4.1.7483.2.2.4.1.2.3.1.1
When read, this attribute will return the result of an audit of the physical topology of the network element. It will have the following format: ::: ... For example, if there is bad topology info associated with locations 1/3A/1 and 1/5A/2, the value of this attribute will be as follows: 2:16974080:17105408 If there are no topology issues, the value of this attribute will be as follows: 0
Status: current	Access: read-only
OBJECT-TYPE
	SnmpAdminString	Size(0..255)

tnAccessPortGroup		1.3.6.1.4.1.7483.2.2.4.1.1.1.1
Tok_String
Status: current	Access: read-only
OBJECT-GROUP

tnIfGroup		1.3.6.1.4.1.7483.2.2.4.1.1.1.2
Tok_String
Status: current	Access: read-only
OBJECT-GROUP

tnSysTopologyGroup		1.3.6.1.4.1.7483.2.2.4.1.1.1.3
Tok_String
Status: current	Access: read-only
OBJECT-GROUP

tnAccessPortCompliance		1.3.6.1.4.1.7483.2.2.4.1.1.2.1
Tok_String
Status: current	Access: read-only
MODULE-COMPLIANCE