TRANSITION-TC

File: TRANSITION-TC.mib (6594 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC INET-ADDRESS-MIB
TRANSITION-SMI

Imported symbols

MODULE-IDENTITY Gauge32 Integer32
TEXTUAL-CONVENTION InetAddressType InetAddress
tnModules

Defined Types

CpsConnector  
This enumerates all the Transition networks supported media connectors.
TEXTUAL-CONVENTION    
  INTEGER rj45(10), stmm(11), stsm(12), scmm(13), scsm(14), scsmlh(15), scsmelh(16), scsmlhlw(17), mtrjmm(18), lc(19), bnc(20), stsmlh(21), stsmelh(22), scmm1300(23), stmm1300(24), mtrjsm(25), serial26(26), stmmlh(27), scsmsh(28), scsimplex(29), bncdual(30), db9rsxxx(31), termblock(32), rj11(33), sc40km(34), sc125km(35), din6(38), sfp(40)  

TNEthernetSpeed  
This enumerates all the Transition networks supported Ethernet speeds.
TEXTUAL-CONVENTION    
  INTEGER mbps10(1), mbps100(2), gbps1(3), gbps10(4), mbps2500(5), gbps5(6), gbps12(7)  

TNEthernetDuplex  
This enumerates all the Transition networks supported Ethernet interface duplex.
TEXTUAL-CONVENTION    
  INTEGER halfDuplex(1), fullDuplex(2)  

TNEthernetAutoCross  
This enumerates all the Transition networks Ethernet Autocross values.
TEXTUAL-CONVENTION    
  INTEGER mdi(1), mdiX(2), autocross(3), notApplicable(4)  

TNLoopbackModeCapBits  
This enumerates all the Transition networks loopback modes capability.
TEXTUAL-CONVENTION    
  BITS unused(0), phyLayerLBCapable(1), macLayerLBCapable(2), alternateLBCapable(3), remotePeerLBCapable(4)  

TNLoopbackModes  
This enumerates all the Transition networks loopback modes supported.
TEXTUAL-CONVENTION    
  INTEGER noLoopback(0), phyLayerLB(1), macLayerLB(2), alternateLB(3), remotePeerLB(4)  

TNVlanIndexOrZero  
The VLAN ID as VlanIndex as defined in Q-BRIDGE including zero. If the value is between 1 and 4095 inclusive, it represents an IEEE 802.1Q VLAN-ID. If the value is zero, it is object-specific and must therefore be defined as part of the description of any object which uses this syntax.
TEXTUAL-CONVENTION    
  INTEGER 0..4095  

TNEthPhyMode  
The different Ethernet PHY interfaces supported.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), phy10x100BaseT(1), phy100BaseFX(2), phy1000BaseX(3), phy10x100x1000BaseT(4), phySGMII(5)  

Defined Values

transitionTC 1.3.6.1.4.1.868.1.5.1
This module defines textual conventions used in the transition enterprise mibs.
MODULE-IDENTITY