TPT-RESOURCE-MIB

File: TPT-RESOURCE-MIB.mib (26434 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC TPT-TPAMIBS-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
OBJECT-IDENTITY Integer32 Unsigned32
Counter64 TEXTUAL-CONVENTION tpt-tpa-objs
tpt-tpa-eventsV2 tpt-tpa-unkparams

Defined Types

ResourceIdentifier  
An identifier of the resource parameter pertaining to a notification.
TEXTUAL-CONVENTION    
  INTEGER filesystem(1), hpCPU(2), hpMemory(3), chassisTemp(4), fan(5), powerSupply(6), hardDisk(7), i2cBus(8)  

ResourceState  
A selection from a set of state levels used in resource thresholds.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), red(1), yellow(2), green(3)  

PowerSupplyState  
A selection from a set of state levels used in power supply status.
TEXTUAL-CONVENTION    
  INTEGER unknown(0), red(1), green(2)  

SnmpVersions  
An indicator of which SNMP versions are enabled.
TEXTUAL-CONVENTION    
  INTEGER none(0), snmpv2(1), snmpv3(2), snmpv2-and-snmpv3(3)  

EnabledOrNot  
An indication of whether a feature is configured as enabled or disabled.
TEXTUAL-CONVENTION    
  INTEGER disabled(0), enabled(1)  

FilesystemState  
Current state of the filesystem.
TEXTUAL-CONVENTION    
  INTEGER unformatted(0), formatted(1), mounted(2)  

RemoteAuthType  
An indication of which remote authentication are enabled.
TEXTUAL-CONVENTION    
  INTEGER none(0), radius(1), sms(2), tacacs(3)  

ResourceFSEntry  
SEQUENCE    
  resourceFSInUseMB Integer32
  resourceFSThresholdMaj Integer32
  resourceFSThresholdCrit Integer32
  resourceFSRangeMin Integer32
  resourceFSRangeMax Integer32
  resourceFSName OCTET STRING
  resourceFSIndex Unsigned32
  resourceFSState FilesystemState
  resourceFSEncryption EnabledOrNot

ResourcePowerSupplyEntry  
SEQUENCE    
  powerSupplyUnitIndex Integer32
  powerSupplyStatus ResourceState

Defined Values

tpt-resource 1.3.6.1.4.1.10734.3.3.2.5
Resource consumption and threshold notifications. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
MODULE-IDENTITY    

resourceNumberOfFilesystems 1.3.6.1.4.1.10734.3.3.2.5.1
The number of filesystems on the device's hard disk.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceFSTable 1.3.6.1.4.1.10734.3.3.2.5.2
Table of per-filesystem resource information.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ResourceFSEntry

resourceFSEntry 1.3.6.1.4.1.10734.3.3.2.5.2.1
An entry in the resource filesystem table. Rows cannot be created or deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  ResourceFSEntry  

resourceFSInUseMB 1.3.6.1.4.1.10734.3.3.2.5.2.1.1
The number of MB in use for this filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceFSThresholdMaj 1.3.6.1.4.1.10734.3.3.2.5.2.1.2
The major threshold value (percent) in use for this filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceFSThresholdCrit 1.3.6.1.4.1.10734.3.3.2.5.2.1.3
The critical threshold value (percent) in use for this filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceFSRangeMin 1.3.6.1.4.1.10734.3.3.2.5.2.1.4
The minimum value of the range of MB in use (usually zero).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceFSRangeMax 1.3.6.1.4.1.10734.3.3.2.5.2.1.5
The size (in MB) of this filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceFSName 1.3.6.1.4.1.10734.3.3.2.5.2.1.6
The name of this filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

resourceFSIndex 1.3.6.1.4.1.10734.3.3.2.5.2.1.7
The number of this table row, from one to the number of filesystems.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

resourceFSState 1.3.6.1.4.1.10734.3.3.2.5.2.1.8
Current state of the filesystem.
Status: current Access: read-only
OBJECT-TYPE    
  FilesystemState  

resourceFSEncryption 1.3.6.1.4.1.10734.3.3.2.5.2.1.9
Indicates whether this filesystem is encrypted or not.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledOrNot  

resourceHPMemoryObjs 1.3.6.1.4.1.10734.3.3.2.5.3
Sub-tree of host processor memory information.
Status: current Access: read-only
OBJECT-IDENTITY    

resourceHPMemoryInUsePercent 1.3.6.1.4.1.10734.3.3.2.5.3.1
The percentage of host processor memory in use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPMemoryThresholdMaj 1.3.6.1.4.1.10734.3.3.2.5.3.2
The major threshold value for host processor memory in use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPMemoryThresholdCrit 1.3.6.1.4.1.10734.3.3.2.5.3.3
The critical threshold value for host processor memory in use.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPMemoryRangeMin 1.3.6.1.4.1.10734.3.3.2.5.3.4
The minimum percentage of host processor memory in use (usually zero).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPMemoryRangeMax 1.3.6.1.4.1.10734.3.3.2.5.3.5
The maximum percentage of host processor memory in use (usually 100).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPMemoryTotal 1.3.6.1.4.1.10734.3.3.2.5.3.6
The size (in bytes) of host processor memory.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceHPCPUObjs 1.3.6.1.4.1.10734.3.3.2.5.4
Sub-tree of host processor CPU information.
Status: current Access: read-only
OBJECT-IDENTITY    

resourceHPCPUBusyPercent 1.3.6.1.4.1.10734.3.3.2.5.4.1
The percentage of host processor CPU busy.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPCPUThresholdMaj 1.3.6.1.4.1.10734.3.3.2.5.4.2
The major threshold value for host processor CPU busy.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPCPUThresholdCrit 1.3.6.1.4.1.10734.3.3.2.5.4.3
The critical threshold value for host processor CPU busy.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPCPURangeMin 1.3.6.1.4.1.10734.3.3.2.5.4.4
The minimum percentage of host processor CPU busy (usually zero).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceHPCPURangeMax 1.3.6.1.4.1.10734.3.3.2.5.4.5
The maximum percentage of host processor CPU busy (usually 100).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentA 1.3.6.1.4.1.10734.3.3.2.5.4.6
Total Utilization of XLR A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier2A 1.3.6.1.4.1.10734.3.3.2.5.4.7
F Thread Utilization of XLR A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier3A 1.3.6.1.4.1.10734.3.3.2.5.4.8
KS Thread Utilization of XLR A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier4A 1.3.6.1.4.1.10734.3.3.2.5.4.9
L Thread Utilization of XLR A
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentB 1.3.6.1.4.1.10734.3.3.2.5.4.10
Total Utilization of XLR B
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier2B 1.3.6.1.4.1.10734.3.3.2.5.4.11
F Thread Utilization of XLR B
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier3B 1.3.6.1.4.1.10734.3.3.2.5.4.12
KS Thread Utilization of XLR B
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier4B 1.3.6.1.4.1.10734.3.3.2.5.4.13
L Thread Utilization of XLR B
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentC 1.3.6.1.4.1.10734.3.3.2.5.4.14
Total Utilization of XLR C
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier2C 1.3.6.1.4.1.10734.3.3.2.5.4.15
F Thread Utilization of XLR C
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier3C 1.3.6.1.4.1.10734.3.3.2.5.4.16
KS Thread Utilization of XLR C
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceNPCPUBusyPercentTier4C 1.3.6.1.4.1.10734.3.3.2.5.4.17
L Thread Utilization of XLR C
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceChassisTempObjs 1.3.6.1.4.1.10734.3.3.2.5.5
Sub-tree of chassis temperature information.
Status: current Access: read-only
OBJECT-IDENTITY    

resourceChassisTempDegreesC 1.3.6.1.4.1.10734.3.3.2.5.5.1
The chassis temperature in degrees C.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceChassisTempThresholdMaj 1.3.6.1.4.1.10734.3.3.2.5.5.2
The major threshold value for chassis temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceChassisTempThresholdCrit 1.3.6.1.4.1.10734.3.3.2.5.5.3
The critical threshold value for chassis temperature.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceChassisTempRangeMin 1.3.6.1.4.1.10734.3.3.2.5.5.4
The minimum value of the chassis temperature range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceChassisTempRangeMax 1.3.6.1.4.1.10734.3.3.2.5.5.5
The maximum value of the chassis temperature range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourcePowerSupplyObjs 1.3.6.1.4.1.10734.3.3.2.5.9
Sub-tree of power supply information.
Status: current Access: read-only
OBJECT-IDENTITY    

resourcePowerSupplyStatus 1.3.6.1.4.1.10734.3.3.2.5.9.1
DEPRECATED as of TOS V. 3.5.0. If the device has dual power supplies and power supply monitoring is enabled, this value indicates whether one or both power supplies is functional (red or green respectively). Otherwise the value is unknown.
Status: deprecated Access: read-only
OBJECT-TYPE    
  ResourceState  

resourcePowerSupplyQuantity 1.3.6.1.4.1.10734.3.3.2.5.9.2
The number of power supplies (1 or 2).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourcePowerSupplyMonitoring 1.3.6.1.4.1.10734.3.3.2.5.9.3
If power supply monitoring is currently enabled, this value is 1; otherwise, this value is 0.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourcePowerSupplyTable 1.3.6.1.4.1.10734.3.3.2.5.9.4
Table of power supplies on the device. The number of entries depends on the value of resourcePowerSupplyQuantity. The maximum number of entries is implementation dependent.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ResourcePowerSupplyEntry

resourcePowerSupplyEntry 1.3.6.1.4.1.10734.3.3.2.5.9.4.1
An entry in the power supply table. Rows cannot be created or deleted.
Status: current Access: not-accessible
OBJECT-TYPE    
  ResourcePowerSupplyEntry  

powerSupplyUnitIndex 1.3.6.1.4.1.10734.3.3.2.5.9.4.1.1
Index into the power supply units on a device. Starts with 1
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

powerSupplyStatus 1.3.6.1.4.1.10734.3.3.2.5.9.4.1.2
If the device has dual power supplies and power supply monitoring is enabled, this value indicates whether one or both power supplies is functional (red or green respectively). Otherwise the value is unknown.
Status: current Access: read-only
OBJECT-TYPE    
  ResourceState  

resourceLogCountObjs 1.3.6.1.4.1.10734.3.3.2.5.7
Sub-tree of system log entry counts by type.
Status: current Access: read-only
OBJECT-IDENTITY    

resourceLogCountCritical 1.3.6.1.4.1.10734.3.3.2.5.7.1
The number of system log entries of type 'critical'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceLogCountError 1.3.6.1.4.1.10734.3.3.2.5.7.2
The number of system log entries of type 'error'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceLogCountWarning 1.3.6.1.4.1.10734.3.3.2.5.7.3
The number of system log entries of type 'warning'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceLogCountInfo 1.3.6.1.4.1.10734.3.3.2.5.7.4
The number of system log entries of type 'info'.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceMetricObjs 1.3.6.1.4.1.10734.3.3.2.5.8
Sub-tree of selected system performance metrics.
Status: current Access: read-only
OBJECT-IDENTITY    

resourceMetricFastpath 1.3.6.1.4.1.10734.3.3.2.5.8.1
Fast path throughput in bits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

resourceMetricSmartpath 1.3.6.1.4.1.10734.3.3.2.5.8.2
Smart path throughput in bits per second.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

resourceMetricCongestion 1.3.6.1.4.1.10734.3.3.2.5.8.3
Congestion count in packets.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

resourceVersion 1.3.6.1.4.1.10734.3.3.2.5.6
Build version and date.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..60)  

resourceDateTime 1.3.6.1.4.1.10734.3.3.2.5.10
Current date and time of device in seconds since January 1, 1970. No timezone offset (UTC)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

resourceSnmpRunState 1.3.6.1.4.1.10734.3.3.2.5.11
An indicator of which SNMP versions are running on the device.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpVersions  

resourceSnmpConfig 1.3.6.1.4.1.10734.3.3.2.5.12
An indicator of which SNMP versions are configured on the device.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpVersions  

resourceRemoteAuthEnabled 1.3.6.1.4.1.10734.3.3.2.5.13
An indicator of whether remote authentication is enabled on the device.
Status: current Access: read-only
OBJECT-TYPE    
  EnabledOrNot  

resourceRemoteAuthTimeout 1.3.6.1.4.1.10734.3.3.2.5.14
The configured remote authentication timeout value in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

resourceRemoteAuthType 1.3.6.1.4.1.10734.3.3.2.5.15
An indicator of which remote authentication mechanism is enabled on the device.
Status: current Access: read-only
OBJECT-TYPE    
  RemoteAuthType  

tptResourceNotifyDeviceID 1.3.6.1.4.1.10734.3.3.3.1.61
The unique identifier of the device sending this notification.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptResourceNotifyIdentifier 1.3.6.1.4.1.10734.3.3.3.1.62
The type of the resource that triggered this notification.
Status: current Access: read-only
OBJECT-TYPE    
  ResourceIdentifier  

tptResourceNotifyFSIndex 1.3.6.1.4.1.10734.3.3.3.1.63
For a filesystem resource, the index of the filesystem (otherwise 0).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptResourceNotifyCurrentValue 1.3.6.1.4.1.10734.3.3.3.1.64
The current value of the resource that triggered this notification.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotifyThresholdMaj 1.3.6.1.4.1.10734.3.3.3.1.65
The major threshold of this resource (between green and yellow states).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotifyThresholdCrit 1.3.6.1.4.1.10734.3.3.3.1.66
The critical threshold of this resource (between yellow and red states).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotifyRangeMin 1.3.6.1.4.1.10734.3.3.3.1.67
The minimum end of the range of values that this resource can take.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotifyRangeMax 1.3.6.1.4.1.10734.3.3.3.1.68
The maximum end of the range of values that this resource can take.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotifyStateBefore 1.3.6.1.4.1.10734.3.3.3.1.69
The state of this resource before the current threshold transition.
Status: current Access: read-only
OBJECT-TYPE    
  ResourceState  

tptResourceNotifyStateAfter 1.3.6.1.4.1.10734.3.3.3.1.70
The state of this resource after the current threshold transition.
Status: current Access: read-only
OBJECT-TYPE    
  ResourceState  

tptResourceNotifyTimeStamp 1.3.6.1.4.1.10734.3.3.3.1.71
The time of the threshold crossing represented by this notification (in seconds since January 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptResourceNotifySubIdentifier 1.3.6.1.4.1.10734.3.3.3.1.72
Sub-Identifier into the type of the resource which trigger this notification. It starts with 1. It is not used in models 5100N or older (set to 0).
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tptResourceNotify 1.3.6.1.4.1.10734.3.3.3.0.14
Notification: Used to inform the management station that a resource parameter has crossed a predefined threshold.
Status: current Access: read-only
NOTIFICATION-TYPE