TPT-NGFW-CLUSTER-MIB

File: TPT-NGFW-CLUSTER-MIB.mib (44147 bytes)

Imported modules

INET-ADDRESS-MIB SNMPv2-CONF SNMPv2-SMI
SNMP-FRAMEWORK-MIB SNMPv2-TC TPT-NGFW-REG-MIB
TPT-PORT-CONFIG-MIB TPT-NGFW-SYSTEM-INFO-MIB

Imported symbols

InetAddress InetAddressType MODULE-COMPLIANCE
NOTIFICATION-GROUP OBJECT-GROUP Counter64
MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
Unsigned32 TimeTicks SnmpAdminString
DateAndTime MacAddress TEXTUAL-CONVENTION
TruthValue tpt-ngfw-compls tpt-ngfw-groups
tpt-ngfw-objs tpt-ngfw-eventsV2 tpt-ngfw-params
Severity tptNgfwNotifySeverity DuplexSetting
AutoNegotiation LineSpeed tptNgfwSystemSerial

Defined Types

FailoverGrpMode  
The operational mode of a fail-over group. There are two modes: Active/Active and Active/Passive.
TEXTUAL-CONVENTION    
  INTEGER activePassive(1), activeActive(2)  

LinkState  
The link state of a port.
TEXTUAL-CONVENTION    
  INTEGER up(1), down(2)  

CfgControl  
Indicates if the device in under local or remote configuration control.
TEXTUAL-CONVENTION    
  INTEGER disabled(1), none(2), local(3), remote(4)  

SyncState  
Reports the overall feature state synchronization for a cluster.
TEXTUAL-CONVENTION    
  INTEGER inSync(1), outOfSync(2), notInit(3), error(4), pending(5)  

HaState  
The high-availability state of a cluster member.
TEXTUAL-CONVENTION    
  INTEGER active(1), passive(2), failed(3), standby(4), disabled(5), unknown(6), activeNoPartner(7), starting(8), stopping(9)  

HealthState  
The overall health of a hardware or software component on the device.
TEXTUAL-CONVENTION    
  INTEGER normal(1), warning(2), critical(3)  

ClusterMemberRejectReason  
The reason for rejecting the membership of a device into a cluster.
TEXTUAL-CONVENTION    
  INTEGER duplicateNodeId(1)  

FailoverGroupState  
The state of a HA fail-over group. A running state indicates that the fail-over group is active and working with both an active and passive device. Degraded state indicates that the fail-over group is active without a fail-over (or passive) device. Stopped state indicates that the fail-over group in not operational.
TEXTUAL-CONVENTION    
  INTEGER running(1), degraded(2), stopped(3)  

ComponentType  
The type of physical component monitored on the device.
TEXTUAL-CONVENTION    
  INTEGER swSal(1), cpu(2), memory(3), swDisk(4), swLink(5), hwFan(6), hwTmp(7), hwVol(8), hwVid(9), hwAny(10), hwPsu(11), unknown(12)  

ThresholdLimitType  
Define if a threshold is an upper or a lower bound.
TEXTUAL-CONVENTION    
  INTEGER upper(1), lower(2)  

ThresholdRelation  
Indicates if a value is above or below a threshold value.
TEXTUAL-CONVENTION    
  INTEGER above(1), below(2)  

ConsistencyCheckType  
The type of consistency check.
TEXTUAL-CONVENTION    
  INTEGER configuration(1), software(2), hardware(3)  

MasterLocation  
Is the master configuration reference local or remote to the device in a cluster.
TEXTUAL-CONVENTION    
  INTEGER local(1), remote(2)  

TptNgfwClusterMemberStatusTableEntry  
SEQUENCE    
  tptNgfwClusterMemberStatusId Unsigned32
  tptNgfwClusterMemberStatusName SnmpAdminString
  tptNgfwClusterMemberStatusSerialNo SnmpAdminString
  tptNgfwClusterMemberStatusHwModel SnmpAdminString
  tptNgfwClusterMemberStatusSwVersion SnmpAdminString
  tptNgfwClusterMemberStatusUptime TimeTicks
  tptNgfwClusterMemberStatusJoinTime DateAndTime
  tptNgfwClusterMemberStatusSmsManaged TruthValue
  tptNgfwClusterMemberStatusCfgControl CfgControl
  tptNgfwClusterMemberStatusCfgStateSync SyncState
  tptNgfwClusterMemberStatusEnabled TruthValue
  tptNgfwClusterMemberStatusHaState HaState
  tptNgfwClusterMemberStatusHealthState HealthState
  tptNgfwClusterMemberStatusHealthScore Unsigned32
  tptNgfwClusterMemberStatusMaster TruthValue

TptNgfwClusterHaFeatSyncTableEntry  
SEQUENCE    
  tptNgfwClusterHaFeatSyncFeature SnmpAdminString
  tptNgfwClusterHaFeatSyncEnabled TruthValue
  tptNgfwClusterHaFeatSyncLogSeverity Severity

TptNgfwClusterHaFgEntry  
SEQUENCE    
  tptNgfwClusterHaFgIndex Unsigned32
  tptNgfwClusterHaFgId Unsigned32
  tptNgfwClusterHaFgName SnmpAdminString
  tptNgfwClusterHaFgBaseMac MacAddress
  tptNgfwClusterHaFgMode FailoverGrpMode

TptNgfwClusterHaFgMemberEntry  
SEQUENCE    
  tptNgfwClusterHaFgMemberId Unsigned32
  tptNgfwClusterHaFgMemberName SnmpAdminString

TptNgfwClusterHaFeatSyncStatusTableEntry  
SEQUENCE    
  tptNgfwClusterHaFeatSyncStatusFeature SnmpAdminString
  tptNgfwClusterHaFeatSyncStatusEnabled TruthValue
  tptNgfwClusterHaFeatSyncStatusSyncState SyncState
  tptNgfwClusterHaFeatSyncStatusSyncStateReason SnmpAdminString
  tptNgfwClusterHaFeatSyncStatusTotalEntries Counter64
  tptNgfwClusterHaFeatSyncStatusAddEntries Counter64
  tptNgfwClusterHaFeatSyncStatusDelEntries Counter64

Defined Values

tptNgfwCluster 1.3.6.1.4.1.10734.3.9.2.2
This MIB defines TippingPoint Next-Generation Firewall Cluster and HA management information. Cluster information includes details on configuration, cluster membership, device's role (active/passive) in a cluster as well as overall health and status for monitoring purposes. High-availability information provides details on the device's membership in Fail-over Groups and the status of feature state synchronization across nodes in the group and cluster. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
MODULE-IDENTITY    

tptNgfwClusterName 1.3.6.1.4.1.10734.3.9.2.2.1
The cluster's unique name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

tptNgfwClusterEnabled 1.3.6.1.4.1.10734.3.9.2.2.2
Indicates if cluster feature support is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterMemberId 1.3.6.1.4.1.10734.3.9.2.2.3
This is the cluster member's unique device ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..15  

tptNgfwClusterMemberName 1.3.6.1.4.1.10734.3.9.2.2.4
The cluster member's name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

tptNgfwClusterStandby 1.3.6.1.4.1.10734.3.9.2.2.5
Is the device in a standby state and not active in the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterSwConstChecks 1.3.6.1.4.1.10734.3.9.2.2.6
Are software consistency checks enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHwConstChecks 1.3.6.1.4.1.10734.3.9.2.2.7
Are hardware consistency checks enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterCfgConstChecks 1.3.6.1.4.1.10734.3.9.2.2.8
Are configuration consistency checks enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterMemberStatusTable 1.3.6.1.4.1.10734.3.9.2.2.9
A table providing summary information about each cluster member's configuration, status, and health.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TptNgfwClusterMemberStatusTableEntry

tptNgfwClusterMemberStatusTableEntry 1.3.6.1.4.1.10734.3.9.2.2.9.1
A table entry containing information for each cluster member.
Status: current Access: not-accessible
OBJECT-TYPE    
  TptNgfwClusterMemberStatusTableEntry  

tptNgfwClusterMemberStatusId 1.3.6.1.4.1.10734.3.9.2.2.9.1.1
The unique cluster member ID.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..15  

tptNgfwClusterMemberStatusName 1.3.6.1.4.1.10734.3.9.2.2.9.1.2
The cluster member's name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..30)  

tptNgfwClusterMemberStatusSerialNo 1.3.6.1.4.1.10734.3.9.2.2.9.1.3
The cluster member's serial number.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

tptNgfwClusterMemberStatusHwModel 1.3.6.1.4.1.10734.3.9.2.2.9.1.4
The members hardware model number.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

tptNgfwClusterMemberStatusSwVersion 1.3.6.1.4.1.10734.3.9.2.2.9.1.5
The member's currently running software version.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..31)  

tptNgfwClusterMemberStatusUptime 1.3.6.1.4.1.10734.3.9.2.2.9.1.6
The time (in 100th/second) since the system was powered on.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

tptNgfwClusterMemberStatusJoinTime 1.3.6.1.4.1.10734.3.9.2.2.9.1.7
The date and time when the device joined the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tptNgfwClusterMemberStatusSmsManaged 1.3.6.1.4.1.10734.3.9.2.2.9.1.8
Indicates if the cluster member is managed by SMS.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterMemberStatusCfgControl 1.3.6.1.4.1.10734.3.9.2.2.9.1.9
Reports how the device's configuration is managed.
Status: current Access: read-only
OBJECT-TYPE    
  CfgControl  

tptNgfwClusterMemberStatusCfgStateSync 1.3.6.1.4.1.10734.3.9.2.2.9.1.10
The system wide configuration synchronization state.
Status: current Access: read-only
OBJECT-TYPE    
  SyncState  

tptNgfwClusterMemberStatusEnabled 1.3.6.1.4.1.10734.3.9.2.2.9.1.11
Is clustering enabled on the member device.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterMemberStatusHaState 1.3.6.1.4.1.10734.3.9.2.2.9.1.12
The state of high-availability features.
Status: current Access: read-only
OBJECT-TYPE    
  HaState  

tptNgfwClusterMemberStatusHealthState 1.3.6.1.4.1.10734.3.9.2.2.9.1.13
The overall health of a member in the cluster.
Status: current Access: read-only
OBJECT-TYPE    
  HealthState  

tptNgfwClusterMemberStatusHealthScore 1.3.6.1.4.1.10734.3.9.2.2.9.1.14
The numeric health score indicating the members health.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..100  

tptNgfwClusterMemberStatusMaster 1.3.6.1.4.1.10734.3.9.2.2.9.1.15
Is the member the master node for the cluster's fail-over group.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterTraffic 1.3.6.1.4.1.10734.3.9.2.2.10
OBJECT IDENTIFIER    

tptNgfwClusterHa 1.3.6.1.4.1.10734.3.9.2.2.11
OBJECT IDENTIFIER    

tptNgfwClusterTctIpAddrType 1.3.6.1.4.1.10734.3.9.2.2.10.1
The type of IP address used for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tptNgfwClusterTctIpAddr 1.3.6.1.4.1.10734.3.9.2.2.10.2
The IPv4 address used for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

tptNgfwClusterTctMulticastAddrType 1.3.6.1.4.1.10734.3.9.2.2.10.3
The HA port multicast address type.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tptNgfwClusterTctMulticastAddr 1.3.6.1.4.1.10734.3.9.2.2.10.4
The IPv4 multicast address used for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

tptNgfwClusterTctPort 1.3.6.1.4.1.10734.3.9.2.2.10.5
The port used for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65534  

tptNgfwClusterTctTtl 1.3.6.1.4.1.10734.3.9.2.2.10.6
The time-to-live (TTL) setting for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..255  

tptNgfwClusterTctMtu 1.3.6.1.4.1.10734.3.9.2.2.10.7
IP MTU value for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 576..9216  

tptNgfwClusterTctTimeout 1.3.6.1.4.1.10734.3.9.2.2.10.8
Timeout in seconds for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 100..10000  

tptNgfwClusterTctRetries 1.3.6.1.4.1.10734.3.9.2.2.10.9
The number retry attempts made for cluster traffic.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10  

tptNgfwClusterTctPortSpeed 1.3.6.1.4.1.10734.3.9.2.2.10.10
The HA port line speed.
Status: current Access: read-only
OBJECT-TYPE    
  LineSpeed  

tptNgfwClusterTctPortDuplex 1.3.6.1.4.1.10734.3.9.2.2.10.11
The current duplex state of the HA port.
Status: current Access: read-only
OBJECT-TYPE    
  DuplexSetting  

tptNgfwClusterTctPortAutoNeg 1.3.6.1.4.1.10734.3.9.2.2.10.12
Is flow control on, off,or auto-negotiated for the HA port.
Status: current Access: read-only
OBJECT-TYPE    
  AutoNegotiation  

tptNgfwClusterTctLinkState 1.3.6.1.4.1.10734.3.9.2.2.10.13
Is the HA link up, or down.
Status: current Access: read-only
OBJECT-TYPE    
  LinkState  

tptNgfwClusterTctEncryptionEnabled 1.3.6.1.4.1.10734.3.9.2.2.10.14
Is cluster traffic encrypted.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHaEnabled 1.3.6.1.4.1.10734.3.9.2.2.11.1
Is the High-availability feature turned on.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHaGlobalStateSyncEnabled 1.3.6.1.4.1.10734.3.9.2.2.11.2
Is feature state synchronization globally enabled. This overrides the configuration for each individual feature.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHaMode 1.3.6.1.4.1.10734.3.9.2.2.11.3
what mode is the HA feature running in.
Status: current Access: read-only
OBJECT-TYPE    
  HaState  

tptNgfwClusterHaFeatSyncTable 1.3.6.1.4.1.10734.3.9.2.2.11.4
A table containing configuration information for each feature that support state synchronization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TptNgfwClusterHaFeatSyncTableEntry

tptNgfwClusterHaFeatSyncTableEntry 1.3.6.1.4.1.10734.3.9.2.2.11.4.1
A entry for each feature that supports state synchronization.
Status: current Access: not-accessible
OBJECT-TYPE    
  TptNgfwClusterHaFeatSyncTableEntry  

tptNgfwClusterHaFeatSyncFeature 1.3.6.1.4.1.10734.3.9.2.2.11.4.1.1
The HA feature name.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

tptNgfwClusterHaFeatSyncEnabled 1.3.6.1.4.1.10734.3.9.2.2.11.4.1.2
Is the HA feature have state synchronization turned on.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHaFeatSyncLogSeverity 1.3.6.1.4.1.10734.3.9.2.2.11.4.1.3
What is the logging level for the feature state synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  Severity  

tptNgfwClusterHaFgTable 1.3.6.1.4.1.10734.3.9.2.2.11.5
A table of fail-over groups within a cluster configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TptNgfwClusterHaFgEntry

tptNgfwClusterHaFgEntry 1.3.6.1.4.1.10734.3.9.2.2.11.5.1
An entry for a fail-over group in a cluster.
Status: current Access: not-accessible
OBJECT-TYPE    
  TptNgfwClusterHaFgEntry  

tptNgfwClusterHaFgIndex 1.3.6.1.4.1.10734.3.9.2.2.11.5.1.1
The fail-over group index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

tptNgfwClusterHaFgId 1.3.6.1.4.1.10734.3.9.2.2.11.5.1.2
The fail-over group ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..10  

tptNgfwClusterHaFgName 1.3.6.1.4.1.10734.3.9.2.2.11.5.1.3
The fail-over group name.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

tptNgfwClusterHaFgBaseMac 1.3.6.1.4.1.10734.3.9.2.2.11.5.1.4
The base MAC address for the fail-ver group.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

tptNgfwClusterHaFgMode 1.3.6.1.4.1.10734.3.9.2.2.11.5.1.5
The operational mode of the fail-over group.
Status: current Access: read-only
OBJECT-TYPE    
  FailoverGrpMode  

tptNgfwClusterHaFgMemberTable 1.3.6.1.4.1.10734.3.9.2.2.11.6
A table of fail-over group memberships for this device.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TptNgfwClusterHaFgMemberEntry

tptNgfwClusterHaFgMemberEntry 1.3.6.1.4.1.10734.3.9.2.2.11.6.1
A entry with a relationship to a fail-over group.
Status: current Access: not-accessible
OBJECT-TYPE    
  TptNgfwClusterHaFgMemberEntry  

tptNgfwClusterHaFgMemberId 1.3.6.1.4.1.10734.3.9.2.2.11.6.1.1
The fail-over group ID this device is a member of.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..15  

tptNgfwClusterHaFgMemberName 1.3.6.1.4.1.10734.3.9.2.2.11.6.1.2
The fail-over group name this device is a member of.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

tptNgfwClusterHaFeatSyncStatusTable 1.3.6.1.4.1.10734.3.9.2.2.11.7
A table of HA feature state synchronization configuration and state.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TptNgfwClusterHaFeatSyncStatusTableEntry

tptNgfwClusterHaFeatSyncStatusTableEntry 1.3.6.1.4.1.10734.3.9.2.2.11.7.1
A entry for a HA feature that has state synchronized within a fail-over group.
Status: current Access: not-accessible
OBJECT-TYPE    
  TptNgfwClusterHaFeatSyncStatusTableEntry  

tptNgfwClusterHaFeatSyncStatusFeature 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.1
The name of the feature which support state synchronization.
Status: current Access: not-accessible
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

tptNgfwClusterHaFeatSyncStatusEnabled 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.2
Is feature state synchronization enabled.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tptNgfwClusterHaFeatSyncStatusSyncState 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.3
The current condition of feature state synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  SyncState  

tptNgfwClusterHaFeatSyncStatusSyncStateReason 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.4
A text description of they current feature state synchronization.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

tptNgfwClusterHaFeatSyncStatusTotalEntries 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.5
The total number of entries for the feature.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tptNgfwClusterHaFeatSyncStatusAddEntries 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.6
The number of added entries for the feature.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tptNgfwClusterHaFeatSyncStatusDelEntries 1.3.6.1.4.1.10734.3.9.2.2.11.7.1.7
The number of deleted entries for the feature.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tptNgfwClusterMemberJoinNotify 1.3.6.1.4.1.10734.3.9.3.0.1
A notification indicating that a device has joined a cluster.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterMemberLeaveNotify 1.3.6.1.4.1.10734.3.9.3.0.2
A notification indicating that a device has left a cluster.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterMemberRejectNotify 1.3.6.1.4.1.10734.3.9.3.0.3
A notification indicating that a device's attempt to join a cluster failed.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterHaStateSyncMessageLossNotify 1.3.6.1.4.1.10734.3.9.3.0.4
Feature state synchronization has lost updates with peer.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterHaStateSyncQueueFullNotify 1.3.6.1.4.1.10734.3.9.3.0.5
Feature state synchronization Buffers have been filled.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterHealthChangeNotify 1.3.6.1.4.1.10734.3.9.3.0.6
A notification indicating how the device's health score has changed.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterHaFgStateChangeNotify 1.3.6.1.4.1.10734.3.9.3.0.7
A notification indicating the state of a HA fail-over group has changed to the specified state.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterCmpStateChangeNotify 1.3.6.1.4.1.10734.3.9.3.0.8
A notification sent when a component has exceeded a monitored threshold value.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterConstChkFailedNotify 1.3.6.1.4.1.10734.3.9.3.0.9
A notification sent if any cluster configuration, software, or hardware consistency check fails.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptNgfwClusterMemberRejectNotifyReason 1.3.6.1.4.1.10734.3.9.3.1.1
The reason a device was not accepted into a cluster configuration.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ClusterMemberRejectReason  

tptNgfwClusterHaStateSyncNotifyFeature 1.3.6.1.4.1.10734.3.9.3.1.2
The name of a HA feature.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..32)  

tptNgfwClusterHealthChangeNotifyState 1.3.6.1.4.1.10734.3.9.3.1.3
The device's current state based on a health score.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HealthState  

tptNgfwClusterHealthChangeNotifyScore 1.3.6.1.4.1.10734.3.9.3.1.4
The current health score between 0-100. The value will be between the upper and lower bounds (inclusive).
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..100  

tptNgfwClusterHealthChangeNotifyStateUpperLimit 1.3.6.1.4.1.10734.3.9.3.1.5
The upper bound of health score range.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..100  

tptNgfwClusterHealthChangeNotifyStateLowerLimit 1.3.6.1.4.1.10734.3.9.3.1.6
The lower bound of health score range.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..100  

tptNgfwClusterHaFgStateChangeNotifyState 1.3.6.1.4.1.10734.3.9.3.1.7
The current fail-over group state.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  FailoverGroupState  

tptNgfwClusterHaFgStateChangeNotifyActiveDeviceId 1.3.6.1.4.1.10734.3.9.3.1.8
The ID of the active device in a fail-over group.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..100  

tptNgfwClusterHaFgStateChangeNotifyPassiveDeviceId 1.3.6.1.4.1.10734.3.9.3.1.9
The ID of the passive device in a fail-over group.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32 0..10  

tptNgfwClusterCmpStateChangeNotifyType 1.3.6.1.4.1.10734.3.9.3.1.10
The type of component on the device that has exceeded a monitored threshold level.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ComponentType  

tptNgfwClusterCmpStateChangeNotifyName 1.3.6.1.4.1.10734.3.9.3.1.11
The name of the component on the device that has exceeded a monitored threshold level.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

tptNgfwClusterCmpStateChangeNotifyState 1.3.6.1.4.1.10734.3.9.3.1.12
The current state of the component.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  HealthState  

tptNgfwClusterCmpStateChangeNotifyValue 1.3.6.1.4.1.10734.3.9.3.1.13
The current component's measured value.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

tptNgfwClusterCmpStateChangeNotifyUnits 1.3.6.1.4.1.10734.3.9.3.1.14
The component's units of measure.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..25)  

tptNgfwClusterCmpStateChangeNotifyThreshold 1.3.6.1.4.1.10734.3.9.3.1.15
The threshold value the component has exceeded.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..255)  

tptNgfwClusterCmpStateChangeNotifyLimitType 1.3.6.1.4.1.10734.3.9.3.1.16
Is the threshold value a upper or lower limit.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ThresholdLimitType  

tptNgfwClusterCmpStateChangeNotifyRelation 1.3.6.1.4.1.10734.3.9.3.1.17
Indicates if the component's current value is above or below the specified threshold value.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ThresholdRelation  

tptNgfwClusterConstChkFailedNotifyType 1.3.6.1.4.1.10734.3.9.3.1.18
The type of consistency check that failed.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  ConsistencyCheckType  

tptNgfwClusterConstChkFailedNotifyMaster 1.3.6.1.4.1.10734.3.9.3.1.19
The location of the master reference.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  MasterLocation  

tptNgfwClusterGroup 1.3.6.1.4.1.10734.3.9.1.1.2
Compliance group for general cluster information and membership table. This group is mandatory.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tptNgfwClusterTrafficGroup 1.3.6.1.4.1.10734.3.9.1.1.3
Compliance group for TippingPoint Cluster Traffic configuration information. This group is mandatory.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tptNgfwClusterHaGroup 1.3.6.1.4.1.10734.3.9.1.1.4
Compliance group for HA related configuration. This group is mandatory.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

tptNgfwClusterNotificationGroup 1.3.6.1.4.1.10734.3.9.1.1.5
A group of notifications related to cluster configuration, status and health.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

tptNgfwClusterCfgCompl 1.3.6.1.4.1.10734.3.9.1.2.2
Compliance group for NGFW cluster MIB.
Status: current Access: accessible-for-notify
MODULE-COMPLIANCE