TPT-MISC-NOTIFY-MIB

File: TPT-MISC-NOTIFY-MIB.mib (26714 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IPV6-TC
INET-ADDRESS-MIB SNMP-FRAMEWORK-MIB TPT-TPAMIBS-MIB
TPT-POLICY-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 IpAddress Integer32
Counter64 DateAndTime TEXTUAL-CONVENTION
Ipv6Address InetAddress InetAddressType
SnmpAdminString tpt-tpa-objs tpt-tpa-eventsV2
tpt-tpa-unkparams SslInspectedFlag

Defined Types

LogFileType  
The type of the file that has rolled over.
TEXTUAL-CONVENTION    
  INTEGER system(1), alert(2), block(3), peer(4), audit(5), quarantine(6)  

DiscoveryDelta  
An indication of whether discovery results changed from the previous scan.
TEXTUAL-CONVENTION    
  INTEGER changed(1), unchanged(2)  

SystemLogSeverity  
An indication of the severity of a system log message.
TEXTUAL-CONVENTION    
  INTEGER critical(1), error(2), emergency(3), warning(4), alert(5), notice(6), info(7), debug(8)  

AddOrRemove  
An indication of whether a host was added to or removed from the quarantine list.
TEXTUAL-CONVENTION    
  INTEGER add(1), remove(2)  

CongestionThresholdPhase  
The congestion threshold phase (entering, continuing, or exiting).
TEXTUAL-CONVENTION    
  INTEGER entering(1), continuing(2), exiting(3)  

AuditLogResult  
The result of an audit check: success, or fail.
TEXTUAL-CONVENTION    
  INTEGER success(1), failed(2)  

AuditLogCategory  
The functional location of where an audit check was made and generated a log entry.
TEXTUAL-CONVENTION    
  INTEGER undefined(1), general(2), login(3), logout(4), user(5), time(6), policy(7), update(8), boot(9), report(10), host(11), cfg(12), device(13), sms(14), server(15), segment(16), license(17), ha(18), monitor(19), ipFilter(20), connTable(21), hostComm(22), tse(23), cf(24)  

Defined Values

tpt-misc-notify 1.3.6.1.4.1.10734.3.3.2.2
Notification definitions that have no other place to call home. Copyright (C) 2016 Trend Micro Incorporated. All Rights Reserved. Trend Micro makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Trend Micro shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Trend Micro. The information is provided 'as is' without warranty of any kind and is subject to change without notice. The only warranties for Trend Micro products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Trend Micro shall not be liable for technical or editorial errors or omissions contained herein. TippingPoint(R), the TippingPoint logo, and Digital Vaccine(R) are registered trademarks of Trend Micro. All other company and product names may be trademarks of their respective holders. All rights reserved. This document contains confidential information, trade secrets or both, which are the property of Trend Micro. No part of this documentation may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Trend Micro or one of its subsidiaries. All other company and product names may be trademarks of their respective holders.
MODULE-IDENTITY    

tptMiscNotifyDeviceID 1.3.6.1.4.1.10734.3.3.3.1.31
The unique identifier of the device sending this notification.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptManagedNotify 1.3.6.1.4.1.10734.3.3.3.0.9
Notification: Used to inform the management station that the device is now being managed by said management station.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptUnmanagedNotify 1.3.6.1.4.1.10734.3.3.3.0.10
Notification: Used to inform the management station that the device is no longer being managed by said management station.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptRolloverNotifyFileType 1.3.6.1.4.1.10734.3.3.3.1.32
The type of the file that has rolled over.
Status: current Access: read-only
OBJECT-TYPE    
  LogFileType  

tptRolloverNotifyMaxFiles 1.3.6.1.4.1.10734.3.3.3.1.33
The maximum number of files maintained for this log file type.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptRolloverNotifyNumFiles 1.3.6.1.4.1.10734.3.3.3.1.34
The number of files that have rolled over.
Status: deprecated Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptRolloverNotifyTime 1.3.6.1.4.1.10734.3.3.3.1.35
The rollover time of the most recent file pertaining to this notification (in seconds since January 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptRolloverNotify 1.3.6.1.4.1.10734.3.3.3.0.11
Notification: Used to inform the management station that a log file has rolled over.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptDiscoveryNotifyScanID 1.3.6.1.4.1.10734.3.3.3.1.42
The unique identifier of the scan pertaining to this notification.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptDiscoveryNotifySegmentName 1.3.6.1.4.1.10734.3.3.3.1.43
The name of the scanned segment pertaining to this notification.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

tptDiscoveryNotifyScanRange 1.3.6.1.4.1.10734.3.3.3.1.44
The network address range requested in the scan pertaining to this notification.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptDiscoveryNotifyDelta 1.3.6.1.4.1.10734.3.3.3.1.45
An indication of whether discovery results changed from the previous scan. Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  DiscoveryDelta  

tptDiscoveryNotifyNewHosts 1.3.6.1.4.1.10734.3.3.3.1.46
The number of new hosts found by this scan (compared to the previous scan). Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

tptDiscoveryNotifyChanged 1.3.6.1.4.1.10734.3.3.3.1.47
The number of hosts for which this scan found different results from the previous scan. Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

tptDiscoveryNotifyUnchanged 1.3.6.1.4.1.10734.3.3.3.1.48
The number of existing hosts for which this scan found the same results (compared to the previous scan). Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

tptDiscoveryNotifyNotFound 1.3.6.1.4.1.10734.3.3.3.1.49
The number of hosts found by the previous scan but not by this scan. Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

tptDiscoveryNotifyUnknown 1.3.6.1.4.1.10734.3.3.3.1.50
The number of addresses scanned where no host was found and for which there was no previous scan data. Undefined if this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Integer32  

tptDiscoveryNotifyStartTime 1.3.6.1.4.1.10734.3.3.3.1.51
The start time of the scan pertaining to this notification (in seconds since January 1, 1970).
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptDiscoveryNotifyStopTime 1.3.6.1.4.1.10734.3.3.3.1.52
The stop time of the scan pertaining to this notification (in seconds since January 1, 1970). A zero value indicates that this notification signifies the start of a scan.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptDiscoveryNotifyErrorText 1.3.6.1.4.1.10734.3.3.3.1.53
If the current scan terminated abnormally, this string describes the error condition. Otherwise, an empty string.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..80)  

tptDiscoveryNotifySchedID 1.3.6.1.4.1.10734.3.3.3.1.56
For a notification resulting from a scheduled scan, this value holds the scheduled scan identifier. Otherwise, this value is undefined.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptDiscoveryNotifyStartStop 1.3.6.1.4.1.10734.3.3.3.0.12
Notification: Used to inform the management station that a network discovery scan has started or stopped.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

tptDiscoveryNotifyHostNetAddr 1.3.6.1.4.1.10734.3.3.3.1.54
The network address of the newly discovered host.
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

tptDiscoveryNotifyHostDeviceID 1.3.6.1.4.1.10734.3.3.3.1.55
The unique identifier of the newly discovered host.
Status: obsolete Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptDiscoveryNotifyNewHost 1.3.6.1.4.1.10734.3.3.3.0.13
Notification: Used to inform the management station that a previously unknown host was discovered by a scan.
Status: obsolete Access: read-only
NOTIFICATION-TYPE    

tptSystemLogNotifyText 1.3.6.1.4.1.10734.3.3.3.1.92
The text of the message being logged.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..1024)  

tptSystemLogNotifySequence 1.3.6.1.4.1.10734.3.3.3.1.93
The log file entry sequence number corresponding to this notification.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

tptSystemLogNotifySeverity 1.3.6.1.4.1.10734.3.3.3.1.94
The severity of the attack for this notification.
Status: current Access: read-only
OBJECT-TYPE    
  SystemLogSeverity  

tptSystemLogNotifyTimeSec 1.3.6.1.4.1.10734.3.3.3.1.95
The time this message was logged (in seconds since January 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptSystemLogNotifyTimeNano 1.3.6.1.4.1.10734.3.3.3.1.96
The nanoseconds portion of tptSystemLogNotifyTimeSec.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptSystemLogNotify 1.3.6.1.4.1.10734.3.3.3.0.16
Notification: Used to inform the management station that a critical, error, or warning message has been logged.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptQuarantineNotifyHostNetAddr 1.3.6.1.4.1.10734.3.3.3.1.132
The network address of the host being quarantined (or removed).
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

tptQuarantineNotifyHostNetAddrV6 1.3.6.1.4.1.10734.3.3.3.1.136
The IPv6 network address of the host being quarantined (or removed).
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

tptQuarantineNotifyReason 1.3.6.1.4.1.10734.3.3.3.1.133
The reason that a host was quarantined (undefined if action is remove).
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

tptQuarantineNotifySegmentName 1.3.6.1.4.1.10734.3.3.3.1.134
A string of the format : that uniquely identifies the segment pertaining to this notification.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..128)  

tptQuarantineNotifyAction 1.3.6.1.4.1.10734.3.3.3.1.135
Whether the host was added to or removed from the quarantine list.
Status: current Access: read-only
OBJECT-TYPE    
  AddOrRemove  

tptQuarantineNotifySslInspected 1.3.6.1.4.1.10734.3.3.3.1.181
Flag indicating if this quarantine action was performed on an inspected SSL data stream.
Status: current Access: read-only
OBJECT-TYPE    
  SslInspectedFlag  

tptQuarantineNotify 1.3.6.1.4.1.10734.3.3.3.0.20
Notification: Used to inform the management station that a host has been either added to or removed from the quarantine list.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptCongestionPacketLoss 1.3.6.1.4.1.10734.3.3.3.1.153
The current packet loss rate per thousand (percent * 10).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptCongestionNotifyPhase 1.3.6.1.4.1.10734.3.3.3.1.154
Whether entering, continuing, or exiting congestion threshold mode.
Status: current Access: read-only
OBJECT-TYPE    
  CongestionThresholdPhase  

tptCongestionThreshold 1.3.6.1.4.1.10734.3.3.3.1.155
The current packet loss threshold per thousand (percent * 10).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptTier3CongestionPacketLoss 1.3.6.1.4.1.10734.3.3.3.1.156
The current tier3 packet loss rate per thousand (percent * 10).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptTier3CongestionNotifyPhase 1.3.6.1.4.1.10734.3.3.3.1.157
Whether entering, continuing, or exiting tier3 congestion threshold mode.
Status: current Access: read-only
OBJECT-TYPE    
  CongestionThresholdPhase  

tptTier3CongestionThreshold 1.3.6.1.4.1.10734.3.3.3.1.158
The current tier3 packet loss threshold per thousand (percent * 10).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptCongestionThresholdNotify 1.3.6.1.4.1.10734.3.3.3.0.25
Notification: Used to inform the management station that the device-wide congestion has exceeded the configured congestion threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptiTier3CongestionThresholdNotify 1.3.6.1.4.1.10734.3.3.3.0.26
Notification: Used to inform the management station that the tier3 congestion has exceeded the configured congestion threshold.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptAuditLogNotify 1.3.6.1.4.1.10734.3.3.3.0.60
Audit-log notification.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptAuditLogNotifyTime 1.3.6.1.4.1.10734.3.3.3.1.170
The date and time when the entry was logged.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

tptAuditLogNotifyAccess 1.3.6.1.4.1.10734.3.3.3.1.171
The access level of the user initiating the audit check and generating the log. This is a bit field with the following mapping: 0x0 - normal 0x1 - operator 0x4 - administrator 0x8 - super-user
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  Unsigned32  

tptAuditLogNotifyType 1.3.6.1.4.1.10734.3.3.3.1.172
The interface source of the audit log action.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..40)  

tptAuditLogNotifyIpAddrType 1.3.6.1.4.1.10734.3.3.3.1.173
The type of IP address from which the user connected.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddressType  

tptAuditLogNotifyIpAddr 1.3.6.1.4.1.10734.3.3.3.1.174
The IP address from which the user connected.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  InetAddress  

tptAuditLogNotifyCategory 1.3.6.1.4.1.10734.3.3.3.1.175
The functional area where the audit log was generated.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AuditLogCategory  

tptAuditLogNotifyResult 1.3.6.1.4.1.10734.3.3.3.1.176
The result, pass or fail, of an audit check.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  AuditLogResult  

tptAuditLogNotifyUser 1.3.6.1.4.1.10734.3.3.3.1.177
The user initiating the audit check and generating the log.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  SnmpAdminString Size(0..80)  

tptAuditLogNotifyMessage 1.3.6.1.4.1.10734.3.3.3.1.178
A description of what configuration change was attempted (and possibly succeeded) by the user.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  OCTET STRING Size(0..4096)  

tptAuditLogCapacityNotifyPercent 1.3.6.1.4.1.10734.3.3.3.1.201
The time of this notification (in seconds since January 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptAuditLogCapacityOrFailureNotifyTime 1.3.6.1.4.1.10734.3.3.3.1.202
The time of this notification (in seconds since January 1, 1970).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tptAuditLogCapacityNotify 1.3.6.1.4.1.10734.3.3.3.0.61
Notification: Used to inform the management station that audit log file size has reached more than 75 percent.
Status: current Access: read-only
NOTIFICATION-TYPE    

tptLoggingFailureNotify 1.3.6.1.4.1.10734.3.3.3.0.62
Notification: Used to inform the management station that logging has failed.
Status: current Access: read-only
NOTIFICATION-TYPE