TN-DHCP-RELAY-MIB

File: TN-DHCP-RELAY-MIB.mib (10908 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
TRANSITION-SMI

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION tnProducts
IpAddress Unsigned32 TruthValue

Defined Types

TNDhcpRelayInformationPolicyType  
This enumeration indicates the DHCP relay information policy type.
TEXTUAL-CONVENTION    
  INTEGER replace(0), keep(1), drop(2)  

Defined Values

tnDhcpRelayMib 1.3.6.1.4.1.868.2.5.148
The mib module for DHCP settings.
MODULE-IDENTITY    

tnDhcpRelayMibObjects 1.3.6.1.4.1.868.2.5.148.1
OBJECT IDENTIFIER    

tnDhcpRelayConfig 1.3.6.1.4.1.868.2.5.148.1.2
OBJECT IDENTIFIER    

tnDhcpRelayConfigGlobals 1.3.6.1.4.1.868.2.5.148.1.2.1
OBJECT IDENTIFIER    

tnDhcpRelayConfigGlobalsMode 1.3.6.1.4.1.868.2.5.148.1.2.1.1
Global mode of DHCP relay. true is to enable DHCP relay and false is to disable it.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnDhcpRelayConfigGlobalsServerIpAddress 1.3.6.1.4.1.868.2.5.148.1.2.1.2
Server IP address. This IP address is for DHCP server where the DHCP relay will relay DHCP packets to.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

tnDhcpRelayConfigGlobalsInformationMode 1.3.6.1.4.1.868.2.5.148.1.2.1.3
Indicates the DHCP relay information mode option operation. Possible modes are - Enabled: Enable DHCP relay information mode operation. When DHCP relay information mode operation is enabled, the agent inserts specific information (option 82) into a DHCP message when forwarding to DHCP server and removes it from a DHCP message when transferring to DHCP client. It only works when DHCP relay operation mode is enabled. Disabled: Disable DHCP relay information mode operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnDhcpRelayConfigGlobalsInformationPolicy 1.3.6.1.4.1.868.2.5.148.1.2.1.4
Indicates the DHCP relay information option policy. When DHCP relay information mode operation is enabled, if the agent receives a DHCP message that already contains relay agent information it will enforce the policy. The 'Replace' policy is invalid when relay information mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  TNDhcpRelayInformationPolicyType  

tnDhcpRelayStatus 1.3.6.1.4.1.868.2.5.148.1.3
OBJECT IDENTIFIER    

tnDhcpRelayStatusStatistics 1.3.6.1.4.1.868.2.5.148.1.3.1
OBJECT IDENTIFIER    

tnDhcpRelayStatusStatisticsServerPacketsRelayed 1.3.6.1.4.1.868.2.5.148.1.3.1.1
Packets relayed from server to client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsServerPacketErrors 1.3.6.1.4.1.868.2.5.148.1.3.1.2
Errors sending packets to servers.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsClientPacketsRelayed 1.3.6.1.4.1.868.2.5.148.1.3.1.3
Packets relayed from client to server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsClientPacketErrors 1.3.6.1.4.1.868.2.5.148.1.3.1.4
Errors sending packets to clients.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsAgentOptionErrors 1.3.6.1.4.1.868.2.5.148.1.3.1.5
Number of packets forwarded without agent options because there was no room.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsMissingAgentOption 1.3.6.1.4.1.868.2.5.148.1.3.1.6
Number of packets dropped because no RAI option matching our ID was found.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsBadCircuitId 1.3.6.1.4.1.868.2.5.148.1.3.1.7
Circuit ID option in matching RAI option did not match any known circuit ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsMissingCircuitId 1.3.6.1.4.1.868.2.5.148.1.3.1.8
Circuit ID option in matching RAI option was missing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsBadRemoteId 1.3.6.1.4.1.868.2.5.148.1.3.1.9
Remote ID option in matching RAI option did not match any known remote ID.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsMissingRemoteId 1.3.6.1.4.1.868.2.5.148.1.3.1.10
Remote ID option in matching RAI option was missing.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsReceiveServerPackets 1.3.6.1.4.1.868.2.5.148.1.3.1.11
Receive DHCP message from server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsReceiveClientPackets 1.3.6.1.4.1.868.2.5.148.1.3.1.12
Receive DHCP message from client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsReceiveClientAgentOption 1.3.6.1.4.1.868.2.5.148.1.3.1.13
Receive relay agent information option from client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsReplaceAgentOption 1.3.6.1.4.1.868.2.5.148.1.3.1.14
Replace relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsKeepAgentOption 1.3.6.1.4.1.868.2.5.148.1.3.1.15
Keep relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayStatusStatisticsDropAgentOption 1.3.6.1.4.1.868.2.5.148.1.3.1.16
Drop relay agent information option.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnDhcpRelayControl 1.3.6.1.4.1.868.2.5.148.1.4
OBJECT IDENTIFIER    

tnDhcpRelayControlClearStatistics 1.3.6.1.4.1.868.2.5.148.1.4.1
The action to clear statistics. true is to clear the statistics data. false, then, does nothing.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnDhcpRelayMibConformance 1.3.6.1.4.1.868.2.5.148.2
OBJECT IDENTIFIER    

tnDhcpRelayMibCompliances 1.3.6.1.4.1.868.2.5.148.2.1
OBJECT IDENTIFIER    

tnDhcpRelayMibGroups 1.3.6.1.4.1.868.2.5.148.2.2
OBJECT IDENTIFIER    

tnDhcpRelayConfigGlobalsInfoGroup 1.3.6.1.4.1.868.2.5.148.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

tnDhcpRelayStatusStatisticsInfoGroup 1.3.6.1.4.1.868.2.5.148.2.2.2
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

tnDhcpRelayControlInfoGroup 1.3.6.1.4.1.868.2.5.148.2.2.3
A collection of objects suitable for bulk operations.
Status: current Access: read-write
OBJECT-GROUP    

tnDhcpRelayMibCompliance 1.3.6.1.4.1.868.2.5.148.2.1.1
The compliance statement for the implementation.
Status: current Access: read-write
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor