TN-DEV-SYS-XNTP-MIB

File: TN-DEV-SYS-XNTP-MIB.mib (10810 bytes)

Imported modules

SNMPv2-TC INET-ADDRESS-MIB SNMPv2-SMI
ENTITY-MIB TN-MGMT-MIB

Imported symbols

DisplayString RowStatus TruthValue
InetAddressType InetAddress MODULE-IDENTITY
Integer32 OBJECT-IDENTITY enterprises
TimeStamp entPhysicalIndex tnDevMgmt

Defined Types

TnxNTPClientMgmtEntry  
SEQUENCE    
  tnxNTPClientStatus INTEGER
  tnxNTPDaylightSavingTime INTEGER
  tnxNTPUTCTimezone INTEGER
  tnxNTPDeviceTimer DisplayString
  tnxNTPDaylightSavingPeriodStart DisplayString
  tnxNTPDaylightSavingPeriodEnd DisplayString
  tnxNTPDaylightSavingOffset Integer32
  tnxNTPDaylightSavingTimeMode INTEGER

TnxNTPServerEntry  
SEQUENCE    
  tnxNTPServerIndex Integer32
  tnxNTPServerIPAddrType InetAddressType
  tnxNTPServerIPAddr InetAddress
  tnxNTPServerStatus RowStatus

Defined Values

tnDevSysxNTP 1.3.6.1.4.1.868.2.5.3.1.1.11
OBJECT IDENTIFIER    

tnxNTPClientMgmtTable 1.3.6.1.4.1.868.2.5.3.1.1.11.1
Table to manage the NTP/SNTP client.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnxNTPClientMgmtEntry

tnxNTPClientMgmtEntry 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1
An entry in the table, containing inforamtion to manage the NTP/SNTP cilent of a device.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnxNTPClientMgmtEntry  

tnxNTPClientStatus 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.1
The status of SNTP client. The value of notApplicable(0) indicating the device don't support NTP/SNTP client, set this value to enabled(1) to enable NTP/SNTP client, set this value to disabled(2) to disable NTP/SNTP client.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER notApplicable(0), enabled(1), disabled(2)  

tnxNTPDaylightSavingTime 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.2
(1)Enable Daylight Saving Time. (2)Disable Daylight Saving Time. Daylight Saving Time: Use this OID to Enable/Disable Daylight Saving Time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

tnxNTPUTCTimezone 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.3
UTC Timezone.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), gmt-negative-12-00-Eniwetok-Kwajalein(1), gmt-negative-11-00-Midway-Island-Samoa(2), gmt-negative-10-00-Hawaii(3), gmt-negative-09-00-Alaska(4), gmt-negative-08-00-Pacific-Time-US-and-Canada-Tijuana(5), gmt-negative-07-00-Arizona(6), gmt-negative-07-00-Mountain-Time-US-and-Canada(7), gmt-negative-06-00-Central-Time-US-and-Canada(8), gmt-negative-06-00-Mexico-City-Tegucigalpa(9), gmt-negative-06-00-Saskatchewan(10), gmt-negative-05-00-Bogota-Lima-Quito(11), gmt-negative-05-00-Eastern-Time-US-and-Canada(12), gmt-negative-05-00-Indiana-East(13), gmt-negative-04-00-Atlantic-Time-Canada(14), gmt-negative-04-00-Caracas-La-Paz(15), gmt-negative-04-00-Santiago(16), gmt-negative-03-30-Newfoundland(17), gmt-negative-03-00-Brasilia(18), gmt-negative-03-00-Buenos-Aires-Georgetown(19), gmt-negative-02-00-Mid-Atlantic(20), gmt-negative-01-00-Azores-Cape-Verde-Is(21), gmt-Casablanca-Monrovia(22), gmt-Greenwich-Mean-Time-Dublin-Edinburgh-Lisbon-London(23), gmt-positive-01-00-Amsterdam-Berlin-Bern-Rome-Stockholm-Vienna(24), gmt-positive-01-00-Belgrade-Bratislava-Budapest-Ljubljana-Prague(25), gmt-positive-01-00-Brussels-Copenhagen-Madrid-Paris-Vilnius(26), gmt-positive-01-00-Sarajevo-Skopje-Sofija-Warsaw-Zagreb(27), gmt-positive-02-00-Athens-Istanbul-Minsk(28), gmt-positive-02-00-Bucharest(29), gmt-positive-02-00-Cairo(30), gmt-positive-02-00-Harare-Pretoria(31), gmt-positive-02-00-Helsinki-Riga-Tallinn(32), gmt-positive-02-00-Jerusalem(33), gmt-positive-03-00-Baghdad-Kuwait-Riyadh(34), gmt-positive-03-00-Moscow-St-Petersburg-Volgograd(35), gmt-positive-03-00-Mairobi(36), gmt-positive-03-30-Tehran(37), gmt-positive-04-00-Abu-Dhabi-Muscat(38), gmt-positive-04-00-Baku-Tbilisi(39), gmt-positive-04-30-Kabul(40), gmt-positive-05-00-Ekaterinburg(41), gmt-positive-05-00-Islamabad-Karachi-Tashkent(42), gmt-positive-05-30-Bombay-Calcutta-Madras-New-Delhi(43), gmt-positive-06-00-Astana-Almaty-Dhaka(44), gmt-positive-06-00-Colombo(45), gmt-positive-07-00-Bangkok-Hanoi-Jakarta(46), gmt-positive-08-00-Beijing-Chongqing-Hong-Kong-Urumqi(47), gmt-positive-08-00-Perth(48), gmt-positive-08-00-Singapore(49), gmt-positive-08-00-Taipei(50), gmt-positive-09-00-Osaka-Sapporo-Tokyo(51), gmt-positive-09-00-Seoul(52), gmt-positive-09-00-Yakutsk(53), gmt-positive-09-30-Adelaide(54), gmt-positive-09-30-Darwin(55), gmt-positive-10-00-Brisbane(56), gmt-positive-10-00-Canberra-Melbourne-Sydney(57), gmt-positive-10-00-Guam-Port-Moresby(58), gmt-positive-10-00-Hobart(59), gmt-positive-10-00-Vladivostok(60), gmt-positive-11-00-Magadan-Solomon-Is-New-Caledonia(61), gmt-positive-12-00-Auckland-Wllington(62), gmt-positive-12-00-Fiji-Kamchatka-Marshall-Is(63)  

tnxNTPDeviceTimer 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.4
The current local time of a device.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

tnxNTPDaylightSavingPeriodStart 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.5
The start-time of daylight saving period, non-recurring mode format: yyyymmdd hh:mm. recurring mode format: w(1-5)d(1-7)mm(1-12) hh:mm.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

tnxNTPDaylightSavingPeriodEnd 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.6
The end-time of daylight saving period, non-recurring mode format: yyyymmdd hh:mm. recurring mode format: w(1-5)d(1-7)mm(1-12) hh:mm.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

tnxNTPDaylightSavingOffset 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.7
Daylight Saving Offset(Usually is 60 mins). When Enable and current time at Daylight Saving Period, the current time of the switch will be offseted by Daylight Saving Offset.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

tnxNTPDaylightSavingTimeMode 1.3.6.1.4.1.868.2.5.3.1.1.11.1.1.8
Daylight Saving Time Mode if it is set to reccuring it will show week, day, month, hour, and minute. In non-recuring mode it will show month, date, year, hour, and minute.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER recurring(1), nonrecurring(2)  

tnxNTPServerTable 1.3.6.1.4.1.868.2.5.3.1.1.11.2
Table of NTP/SNTP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnxNTPServerEntry

tnxNTPServerEntry 1.3.6.1.4.1.868.2.5.3.1.1.11.2.1
An entry in the table, containing inforamtion about a SNTP server.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnxNTPServerEntry  

tnxNTPServerIndex 1.3.6.1.4.1.868.2.5.3.1.1.11.2.1.1
Index of NTP/SNTP server table.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tnxNTPServerIPAddrType 1.3.6.1.4.1.868.2.5.3.1.1.11.2.1.2
The IP address type(v4 or v6) of the NTP/SNTP server address. For a detailed description of this type, please refer to INET-ADDRESS-MIB.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

tnxNTPServerIPAddr 1.3.6.1.4.1.868.2.5.3.1.1.11.2.1.3
The IPv4 or IPv6 address of a NTP/SNTP server. For a detailed description of this type, please refer to INET-ADDRESS-MIB.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnxNTPServerStatus 1.3.6.1.4.1.868.2.5.3.1.1.11.2.1.4
For a detailed description of this object, please refer to SNMPv2-TC MIB.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor