TN-DDMI-MIB

File: TN-DDMI-MIB.mib (17939 bytes)

Imported modules

SNMPv2-CONF SNMPv2-SMI SNMPv2-TC
TRANSITION-SMI TN-TC

Imported symbols

MODULE-COMPLIANCE OBJECT-GROUP MODULE-IDENTITY
OBJECT-TYPE TEXTUAL-CONVENTION tnProducts
TruthValue TNDisplayString TNInterfaceIndex
TNSfpTransceiver

Defined Types

TNDdmiStatusInterfaceEntry  
SEQUENCE    
  tnDdmiStatusInterfaceIfIndex TNInterfaceIndex
  tnDdmiStatusInterfaceA0Supported TruthValue
  tnDdmiStatusInterfaceA0SfpDetected TruthValue
  tnDdmiStatusInterfaceA0Vendor TNDisplayString
  tnDdmiStatusInterfaceA0PartNumber TNDisplayString
  tnDdmiStatusInterfaceA0SerialNumber TNDisplayString
  tnDdmiStatusInterfaceA0Revision TNDisplayString
  tnDdmiStatusInterfaceA0DateCode TNDisplayString
  tnDdmiStatusInterfaceA0SfpType TNSfpTransceiver
  tnDdmiStatusInterfaceA2Supported TruthValue
  tnDdmiStatusInterfaceA2CurrentTemperature TNDisplayString
  tnDdmiStatusInterfaceA2TemperatureHighAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TemperatureLowAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TemperatureHighWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TemperatureLowWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2CurrentVoltage TNDisplayString
  tnDdmiStatusInterfaceA2VoltageHighAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2VoltageLowAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2VoltageHighWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2VoltageLowWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2CurrentTxBias TNDisplayString
  tnDdmiStatusInterfaceA2TxBiasHighAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxBiasLowAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxBiasHighWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxBiasLowWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2CurrentTxPower TNDisplayString
  tnDdmiStatusInterfaceA2TxPowerHighAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxPowerLowAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxPowerHighWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2TxPowerLowWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2CurrentRxPower TNDisplayString
  tnDdmiStatusInterfaceA2RxPowerHighAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2RxPowerLowAlarmThreshold TNDisplayString
  tnDdmiStatusInterfaceA2RxPowerHighWarnThreshold TNDisplayString
  tnDdmiStatusInterfaceA2RxPowerLowWarnThreshold TNDisplayString

Defined Values

tnDdmiMib 1.3.6.1.4.1.868.2.5.152
This is a private version of DDMI
MODULE-IDENTITY    

tnDdmiMibObjects 1.3.6.1.4.1.868.2.5.152.1
OBJECT IDENTIFIER    

tnDdmiConfig 1.3.6.1.4.1.868.2.5.152.1.2
OBJECT IDENTIFIER    

tnDdmiConfigGlobals 1.3.6.1.4.1.868.2.5.152.1.2.1
OBJECT IDENTIFIER    

tnDdmiConfigGlobalsMode 1.3.6.1.4.1.868.2.5.152.1.2.1.1
Global operation mode of DDMI. true is to enable the functions of DDMI and false is to disable it.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnDdmiStatus 1.3.6.1.4.1.868.2.5.152.1.3
OBJECT IDENTIFIER    

tnDdmiStatusInterfaceTable 1.3.6.1.4.1.868.2.5.152.1.3.2
This is a DDMI status table of port interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TNDdmiStatusInterfaceEntry

tnDdmiStatusInterfaceEntry 1.3.6.1.4.1.868.2.5.152.1.3.2.1
Each entry has a set of DDMI status.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNDdmiStatusInterfaceEntry  

tnDdmiStatusInterfaceIfIndex 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1
Logical interface number of physical port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TNInterfaceIndex  

tnDdmiStatusInterfaceA0Supported 1.3.6.1.4.1.868.2.5.152.1.3.2.1.2
Support transceiver status information or not. true is to supported and false is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnDdmiStatusInterfaceA0SfpDetected 1.3.6.1.4.1.868.2.5.152.1.3.2.1.3
SFP module is detected or not. true is to detected and false is not detected.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnDdmiStatusInterfaceA0Vendor 1.3.6.1.4.1.868.2.5.152.1.3.2.1.4
Vendor name.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA0PartNumber 1.3.6.1.4.1.868.2.5.152.1.3.2.1.5
Part number.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA0SerialNumber 1.3.6.1.4.1.868.2.5.152.1.3.2.1.6
Serial number.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA0Revision 1.3.6.1.4.1.868.2.5.152.1.3.2.1.7
Revision.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA0DateCode 1.3.6.1.4.1.868.2.5.152.1.3.2.1.8
Date Code.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA0SfpType 1.3.6.1.4.1.868.2.5.152.1.3.2.1.9
SFP type. none(0) means no SFP module. notSupported(1) means SFP module is not supported. sfp100Fx(2) means SFP 100BASE-FX. sfp100BaseLx(3) means SFP 100BASE-LX. sfp100BaseBx10(4) means SFP 100BASE-BX10. sfp100BaseT(5) means SFP 100BASE-T. sfp1000BaseBx10(6) means SFP 1000BASE-BX10. sfp1000BaseT(7) means SFP 1000BASE-T. sfp1000BaseCx(8) means SFP 1000BASE-CX. sfp1000BaseSx(9) means SFP 1000BASE-SX. sfp1000BaseLx(10) means SFP 1000BASE-LX. sfp1000BaseX(11) means SFP 1000BASE-X. sfp2G5(12) means SFP 2.5G. sfp5G(13) means SFP 5G. sfp10G(14) means SFP 10G.
Status: current Access: read-only
OBJECT-TYPE    
  TNSfpTransceiver  

tnDdmiStatusInterfaceA2Supported 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1002
Support DDMI status information or not. true is to supported and false is not supported.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnDdmiStatusInterfaceA2CurrentTemperature 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1003
Current temperature in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TemperatureHighAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1004
Temperature high alarm threshold in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TemperatureLowAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1005
Temperature low alarm threshold in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TemperatureHighWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1006
Temperature high warning threshold in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TemperatureLowWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1007
Temperature low warning threshold in Celcius.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2CurrentVoltage 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1008
Current voltage in Volt.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2VoltageHighAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1009
Voltage high alarm threshold in Volt.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2VoltageLowAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1010
Voltage low alarm threshold in Volt.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2VoltageHighWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1011
Voltage high warning threshold in Volt.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2VoltageLowWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1012
Voltage low warning threshold in Volt.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2CurrentTxBias 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1013
Current Tx bias in mA.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxBiasHighAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1014
Tx bias high alarm threshold in mA.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxBiasLowAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1015
Tx bias low alarm threshold in mA.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxBiasHighWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1016
Tx bias high warning threshold in mA.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxBiasLowWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1017
Tx bias low warning threshold in mA.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2CurrentTxPower 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1018
Current Tx power in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxPowerHighAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1019
Tx power high alarm threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxPowerLowAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1020
Tx power low alarm threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxPowerHighWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1021
Tx power high warning threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2TxPowerLowWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1022
Tx power low warning threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2CurrentRxPower 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1023
Current Rx power in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2RxPowerHighAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1024
Rx power high alarm threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2RxPowerLowAlarmThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1025
Rx power low alarm threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2RxPowerHighWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1026
Rx power high warning threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiStatusInterfaceA2RxPowerLowWarnThreshold 1.3.6.1.4.1.868.2.5.152.1.3.2.1.1027
Rx power low warning threshold in mV.
Status: current Access: read-only
OBJECT-TYPE    
  TNDisplayString Size(0..16)  

tnDdmiMibConformance 1.3.6.1.4.1.868.2.5.152.2
OBJECT IDENTIFIER    

tnDdmiMibCompliances 1.3.6.1.4.1.868.2.5.152.2.1
OBJECT IDENTIFIER    

tnDdmiMibGroups 1.3.6.1.4.1.868.2.5.152.2.2
OBJECT IDENTIFIER    

tnDdmiConfigGlobalsInfoGroup 1.3.6.1.4.1.868.2.5.152.2.2.1
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

tnDdmiStatusInterfaceTableInfoGroup 1.3.6.1.4.1.868.2.5.152.2.2.2
A collection of objects suitable for bulk operations.
Status: current Access: read-only
OBJECT-GROUP    

tnDdmiMibCompliance 1.3.6.1.4.1.868.2.5.152.2.1.1
The compliance statement for the implementation.
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor