TN-CES-MIB

File: TN-CES-MIB.mib (92784 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB SNMPv2-TC
SNMPv2-CONF TRANSITION-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Unsigned32 Counter32 Integer32
InetAddressType InetAddress TruthValue
MacAddress DisplayString DateAndTime
OBJECT-GROUP NOTIFICATION-GROUP MODULE-COMPLIANCE
tnProducts

Defined Types

TnCesMiscClockPriorityEntry  
SEQUENCE    
  tnCesMiscClockPriorityItem INTEGER
  tnCesMiscClockPriority Unsigned32

TnCesPRIClockPriorityEntry  
SEQUENCE    
  tnCesPRIClockPriorityIndex Unsigned32
  tnCesPRIClockPriority Unsigned32

TnCesLLClockPriorityEntry  
SEQUENCE    
  tnCesLLClockPriorityIndex Unsigned32
  tnCesLLClockPriority Unsigned32

TnCesMulticastJoinEntry  
SEQUENCE    
  tnCesMulticastJoinIndex Unsigned32
  tnCesMulticastJoinAction TruthValue
  tnCesMulticastJoinAddrType InetAddressType
  tnCesMulticastJoinAddr InetAddress

TnCesTDMEntry  
SEQUENCE    
  tnCesTDMPortNumber Unsigned32
  tnCesTDMPresentation INTEGER
  tnCesTDMFraming INTEGER
  tnCesTDMMode INTEGER
  tnCesTDMTS0Passthrough TruthValue
  tnCesTDMCRC4 TruthValue
  tnCesTDMShutdownCallsOnFail TruthValue
  tnCesTDMImpedance INTEGER
  tnCesTDMT1Framing INTEGER
  tnCesTDMT1LineCode INTEGER
  tnCesTDMT1LoopCodeType INTEGER
  tnCesTDMT1LoopCodeRxEnable TruthValue
  tnCesTDMT1LoopCodeUserUp Unsigned32
  tnCesTDMT1LoopCodeUserDown Unsigned32
  tnCesTDMT1LoopCodeUserLength Unsigned32
  tnCesTDMDTE TruthValue

TnCesLLEntry  
SEQUENCE    
  tnCesLLNumber Unsigned32
  tnCesLLname DisplayString
  tnCesLLDirection INTEGER
  tnCesLLRemoteIpAddrType InetAddressType
  tnCesLLRemoteIpAddr InetAddress
  tnCesLLSecondaryRemoteIpAddrType InetAddressType
  tnCesLLSecondaryRemoteIpAddr InetAddress
  tnCesLLQosType INTEGER
  tnCesLLQosTOS Unsigned32
  tnCesLLQosDiffserv Unsigned32
  tnCesLLVlanTag TruthValue
  tnCesLLVlanId Unsigned32
  tnCesLLVlanPriority Unsigned32
  tnCesLLJitterBufferLength Unsigned32
  tnCesLLFramesPerPacket Unsigned32
  tnCesLLRemoteLinkNumber Unsigned32

TnCesLLSchedEntry  
SEQUENCE    
  tnCesLLSchedNumber Unsigned32
  tnCesLLSchedEnable TruthValue
  tnCesLLSchedStartTimeMonHours Unsigned32
  tnCesLLSchedStartTimeMonMins Unsigned32
  tnCesLLSchedStopTimeMonHours Unsigned32
  tnCesLLSchedStopTimeMonMins Unsigned32
  tnCesLLSchedStartTimeTueHours Unsigned32
  tnCesLLSchedStartTimeTueMins Unsigned32
  tnCesLLSchedStopTimeTueHours Unsigned32
  tnCesLLSchedStopTimeTueMins Unsigned32
  tnCesLLSchedStartTimeWedHours Unsigned32
  tnCesLLSchedStartTimeWedMins Unsigned32
  tnCesLLSchedStopTimeWedHours Unsigned32
  tnCesLLSchedStopTimeWedMins Unsigned32
  tnCesLLSchedStartTimeThuHours Unsigned32
  tnCesLLSchedStartTimeThuMins Unsigned32
  tnCesLLSchedStopTimeThuHours Unsigned32
  tnCesLLSchedStopTimeThuMins Unsigned32
  tnCesLLSchedStartTimeFriHours Unsigned32
  tnCesLLSchedStartTimeFriMins Unsigned32
  tnCesLLSchedStopTimeFriHours Unsigned32
  tnCesLLSchedStopTimeFriMins Unsigned32
  tnCesLLSchedStartTimeSatHours Unsigned32
  tnCesLLSchedStartTimeSatMins Unsigned32
  tnCesLLSchedStopTimeSatHours Unsigned32
  tnCesLLSchedStopTimeSatMins Unsigned32
  tnCesLLSchedStartTimeSunHours Unsigned32
  tnCesLLSchedStartTimeSunMins Unsigned32
  tnCesLLSchedStopTimeSunHours Unsigned32
  tnCesLLSchedStopTimeSunMins Unsigned32

TnCesLLJAEntry  
SEQUENCE    
  tnCesLLJANumber Unsigned32
  tnCesLLJitterAdjustmentMode INTEGER
  tnCesLLJitterAdjustmentAfter Unsigned32
  tnCesLLJASchedStartTimeMonHours Unsigned32
  tnCesLLJASchedStartTimeMonMins Unsigned32
  tnCesLLJASchedStopTimeMonHours Unsigned32
  tnCesLLJASchedStopTimeMonMins Unsigned32
  tnCesLLJASchedStartTimeTueHours Unsigned32
  tnCesLLJASchedStartTimeTueMins Unsigned32
  tnCesLLJASchedStopTimeTueHours Unsigned32
  tnCesLLJASchedStopTimeTueMins Unsigned32
  tnCesLLJASchedStartTimeWedHours Unsigned32
  tnCesLLJASchedStartTimeWedMins Unsigned32
  tnCesLLJASchedStopTimeWedHours Unsigned32
  tnCesLLJASchedStopTimeWedMins Unsigned32
  tnCesLLJASchedStartTimeThuHours Unsigned32
  tnCesLLJASchedStartTimeThuMins Unsigned32
  tnCesLLJASchedStopTimeThuHours Unsigned32
  tnCesLLJASchedStopTimeThuMins Unsigned32
  tnCesLLJASchedStartTimeFriHours Unsigned32
  tnCesLLJASchedStartTimeFriMins Unsigned32
  tnCesLLJASchedStopTimeFriHours Unsigned32
  tnCesLLJASchedStopTimeFriMins Unsigned32
  tnCesLLJASchedStartTimeSatHours Unsigned32
  tnCesLLJASchedStartTimeSatMins Unsigned32
  tnCesLLJASchedStopTimeSatHours Unsigned32
  tnCesLLJASchedStopTimeSatMins Unsigned32
  tnCesLLJASchedStartTimeSunHours Unsigned32
  tnCesLLJASchedStartTimeSunMins Unsigned32
  tnCesLLJASchedStopTimeSunHours Unsigned32
  tnCesLLJASchedStopTimeSunMins Unsigned32

TnCesLLChanSelectEntry  
SEQUENCE    
  tnCesLLChanSelectLLNumber Unsigned32
  tnCesLLChanSelectPortNumber Unsigned32
  tnCesLLChanSelectAvailable Unsigned32
  tnCesLLChanSelectUsed Unsigned32

TnCesLLAlternateEntry  
SEQUENCE    
  tnCesLLAlternateLLNumber Unsigned32
  tnCesLLPlesiosynchronous TruthValue
  tnCesLLAsymmetric TruthValue
  tnCesLLBytesPerPacketRx Unsigned32
  tnCesLLBytesPerPacketTx Unsigned32

TnCesLLStatusEntry  
SEQUENCE    
  tnCesLLStatusNumber Unsigned32
  tnCesLLStatusEnabled TruthValue
  tnCesLLStatusActive TruthValue
  tnCesLLStatusArpResolved TruthValue
  tnCesLLStatusNumberOfChannels Unsigned32
  tnCesLLStatusRemoteMac MacAddress
  tnCesLLStatusRemoteIpAddrType InetAddressType
  tnCesLLStatusRemoteIpAddr InetAddress
  tnCesLLStatusRemoteContextKnown TruthValue
  tnCesLLStatusRemoteContextNumber Unsigned32
  tnCesLLStatusRemotePortKnown TruthValue
  tnCesLLStatusRemotePort Unsigned32
  tnCesLLStatusQueueLengthValid TruthValue
  tnCesLLStatusMinQueueLength Unsigned32
  tnCesLLStatusMaxQueueLength Unsigned32
  tnCesLLStatusAveQueueLengthWhole Unsigned32
  tnCesLLStatusAveQueueLengthFrac Unsigned32
  tnCesLLStatusEarly Counter32
  tnCesLLStatusLate Counter32
  tnCesLLStatusUnderrun Counter32
  tnCesLLStatusLastSequence Counter32
  tnCesLLStatusPacketsRx Counter32
  tnCesLLStatusPacketsTx Counter32
  tnCesLLStatusSlipsReduceCount Counter32
  tnCesLLStatusSlipsExtendCount Counter32
  tnCesLLLocalLoop TruthValue
  tnCesLLRemoteLoop TruthValue
  tnCesLLNudge Integer32
  tnCesLLResetErrorStats TruthValue

TnCesTDMStatusEntry  
SEQUENCE    
  tnCesTDMStatusNumber Unsigned32
  tnCesTDMStatusPhysical DisplayString
  tnCesTDMStatusRxSignalLevel DisplayString
  tnCesTDMStatusRxError DisplayString
  tnCesTDMLocalLoop TruthValue
  tnCesTDMRemoteLoop TruthValue
  tnCesTDMBreakCalls TruthValue

TnCesCallStatusEntry  
SEQUENCE    
  tnCesCallStatusNumber Unsigned32
  tnCesCallStatusStartTime DateAndTime
  tnCesCallStatusSource DisplayString
  tnCesCallStatusDestination DisplayString
  tnCesCallStatusOriginator TruthValue
  tnCesCallStatusDestinationNumber DisplayString
  tnCesCallStatusSourceNumber DisplayString
  tnCesCallStatusState DisplayString

TnCesClockStatusEntry  
SEQUENCE    
  tnCesClockStatusStreamNumber Unsigned32
  tnCesClockStatusStreamStatus INTEGER
  tnCesClockStatusStreamMode INTEGER
  tnCesClockStatusStreamDCO Integer32
  tnCesClockStatusStreamDCOMin Integer32
  tnCesClockStatusStreamDCOMax Integer32
  tnCesClockStatusStreamDCOAvg Integer32

TnCesDebugTDMEntry  
SEQUENCE    
  tnCesDebugTDMPortNumber Unsigned32
  tnCesDebugTDMPortEnable TruthValue

TnCesDebugLLEntry  
SEQUENCE    
  tnCesDebugLLNumber Unsigned32
  tnCesDebugLLEnable TruthValue

TnCesDebugMiscEntry  
SEQUENCE    
  tnCesDebugMiscItem INTEGER
  tnCesDebugMiscEnable TruthValue

TnCesRS530Entry  
SEQUENCE    
  tnCesRS530PortNumber Unsigned32
  tnCesRS530Rate Unsigned32
  tnCesRS530ShutdownCallsOnFail TruthValue

TnCesRS530StatusEntry  
SEQUENCE    
  tnCesRS530StatusNumber Unsigned32
  tnCesRS530InterfaceType DisplayString
  tnCesRS530StatusDTR TruthValue
  tnCesRS530StatusDCD TruthValue
  tnCesRS530StatusRTS TruthValue
  tnCesRS530StatusCTS TruthValue
  tnCesRS530StatusDSR TruthValue
  tnCesRS530LocalLoop TruthValue
  tnCesRS530RemoteLoop TruthValue
  tnCesRS530BreakCalls TruthValue

Defined Values

tnCesMIB 1.3.6.1.4.1.868.2.5.60
The MIB module for the Circuit Emulation Service.
MODULE-IDENTITY    

tnCesNotifications 1.3.6.1.4.1.868.2.5.60.0
OBJECT IDENTIFIER    

tnCesEventId 1.3.6.1.4.1.868.2.5.60.0.3
OBJECT IDENTIFIER    

tnCesEventIdGeneral 1.3.6.1.4.1.868.2.5.60.0.3.0
OBJECT IDENTIFIER    

tnCesObjects 1.3.6.1.4.1.868.2.5.60.1
OBJECT IDENTIFIER    

tnCesConformance 1.3.6.1.4.1.868.2.5.60.2
OBJECT IDENTIFIER    

tnCesCompliances 1.3.6.1.4.1.868.2.5.60.2.1
OBJECT IDENTIFIER    

tnCesGroups 1.3.6.1.4.1.868.2.5.60.2.2
OBJECT IDENTIFIER    

tnCesProtocol 1.3.6.1.4.1.868.2.5.60.1.1
OBJECT IDENTIFIER    

tnCesProtocolType 1.3.6.1.4.1.868.2.5.60.1.1.1
Which network protocol to use for TDM over IP packets. Note that MPLS is not currenly supported.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ipUdpRtp(0), ip(1), mpls(2), ethernet(3)  

tnCesProtocolUnderrunFixed 1.3.6.1.4.1.868.2.5.60.1.1.2
Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. When true, use the fixed value specified by tnCesProtocolUnderrunValue. When false, use the last value sent on the timeslot.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesProtocolUnderrunValue 1.3.6.1.4.1.868.2.5.60.1.1.3
Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. Used when tnCesProtocolUnderrunFixed is false.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tnCesProtocolUDPBasePort 1.3.6.1.4.1.868.2.5.60.1.1.4
The UDP port number used for the first logical link. The 2nd logical link uses this value plus one, and so on. Only relevent when tnCesProtocolType is ipUdpRtp.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65472  

tnCesProtocolEnableSSRCChecking 1.3.6.1.4.1.868.2.5.60.1.1.5
Whether to check the RTP SSRC value on received packets. Disabling the check can be useful in aiding compatibility with equipment from other vendors. Only used when tnCesProtocolType is ipUdpRtp.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesClockingAlternate 1.3.6.1.4.1.868.2.5.60.1.2
OBJECT IDENTIFIER    

tnCesClockingAlternateEnable 1.3.6.1.4.1.868.2.5.60.1.2.1
Whether to use the alternate clocking architecure which supports asymmeric and plesiosynchronous operation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesClockRecovery 1.3.6.1.4.1.868.2.5.60.1.3
OBJECT IDENTIFIER    

tnCesClockRecoveryAlgorithm 1.3.6.1.4.1.868.2.5.60.1.3.1
Which algorithm to use for TDM over IP clock recovery.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER adaptive(1), adaptiveEnhanced(2), adaptiveFrequency(3)  

tnCesClockRecoveryFilter 1.3.6.1.4.1.868.2.5.60.1.3.2
Which filter setting to use for TDM over IP clock recovery.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER type1(1), type2(2)  

tnCesClockRecoveryMaxDeviation 1.3.6.1.4.1.868.2.5.60.1.3.3
The maximum step change allowed in the recovered clock in PPM.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..200  

tnCesEvent 1.3.6.1.4.1.868.2.5.60.1.4
OBJECT IDENTIFIER    

tnCesEventThreshold 1.3.6.1.4.1.868.2.5.60.1.4.1
Priority threshold for reporting events related to CES. Events with a priority above this level are not reported to the system log or notified in SNMP traps.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..5  

tnCesEventReportingInterval 1.3.6.1.4.1.868.2.5.60.1.4.2
How frequently to report certain CES events when thesholds are exceeded. The interval is specicifed in minutes.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1440  

tnCesEventThresholdEarly 1.3.6.1.4.1.868.2.5.60.1.4.3
Threshold above which to report early packet errors. When this value is zero, reporting is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

tnCesEventThresholdLate 1.3.6.1.4.1.868.2.5.60.1.4.4
Threshold above which to report late packet errors. When this value is zero, reporting is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

tnCesEventThresholdUnderrun 1.3.6.1.4.1.868.2.5.60.1.4.5
Threshold above which to report underrun errors. When this value is zero, reporting is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

tnCesEventThresholdDCO 1.3.6.1.4.1.868.2.5.60.1.4.6
Threshold above which to report clock recovery DCO changes. When this value is zero, reporting is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..65535  

tnCesProcessor 1.3.6.1.4.1.868.2.5.60.1.5
OBJECT IDENTIFIER    

tnCesProcessorVersion 1.3.6.1.4.1.868.2.5.60.1.5.1
CES packet processor hardware and software version information.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

tnCesProcessorProtocolMatch1 1.3.6.1.4.1.868.2.5.60.1.5.2
The number of frames which hit protocol matching rule 1.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorProtocolMatch2 1.3.6.1.4.1.868.2.5.60.1.5.3
The number of frames which hit protocol matching rule 2.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorProtocolMatch3 1.3.6.1.4.1.868.2.5.60.1.5.4
The number of frames which hit protocol matching rule 3.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorProtocolMatch4 1.3.6.1.4.1.868.2.5.60.1.5.5
The number of frames which hit protocol matching rule 4.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorProtocolNoMatch 1.3.6.1.4.1.868.2.5.60.1.5.6
The number of frames which hit no protocol matching rules.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorClassifyFail 1.3.6.1.4.1.868.2.5.60.1.5.7
The number of frames which fail to classify.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorVerifyFail 1.3.6.1.4.1.868.2.5.60.1.5.8
The number of frames which fail to verify.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorIpv4ChecksumFail 1.3.6.1.4.1.868.2.5.60.1.5.9
The number of frames with IPV4 checksum failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesProcessorUdpChecksumFail 1.3.6.1.4.1.868.2.5.60.1.5.10
The number of frames with UDP checksum failures.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesClockStatus 1.3.6.1.4.1.868.2.5.60.1.6
OBJECT IDENTIFIER    

tnCesClockStatusLock 1.3.6.1.4.1.868.2.5.60.1.6.1
The CES processor DPLL lock status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clockLockAutomatic(0), clockLockNormal(1), clockLockHoldover(2), clockLockFreerun(3), clockLockUnknown(4)  

tnCesClockStatusSlaveMode 1.3.6.1.4.1.868.2.5.60.1.6.2
Whether the CES processor clock is in slave (true) or master (false) mode.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesClockStatusSource 1.3.6.1.4.1.868.2.5.60.1.6.3
Name of the current clock source.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

tnCesTemperature 1.3.6.1.4.1.868.2.5.60.1.7
OBJECT IDENTIFIER    

tnCesTemperatureBoardWhole 1.3.6.1.4.1.868.2.5.60.1.7.1
Temperature measurement of circuit board. Whole part before the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesTemperatureBoardFrac 1.3.6.1.4.1.868.2.5.60.1.7.2
Temperature measurement of circuit board. Fractional part after the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesTemperatureProcessorWhole 1.3.6.1.4.1.868.2.5.60.1.7.3
Temperature measurement of processor. Whole part before the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesTemperatureProcessorFrac 1.3.6.1.4.1.868.2.5.60.1.7.4
Temperature measurement of processor. Fractional part after the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesIP 1.3.6.1.4.1.868.2.5.60.1.8
OBJECT IDENTIFIER    

tnCesIpv4AddrType 1.3.6.1.4.1.868.2.5.60.1.8.1
The IP address type associated with tnCesIpv4Addr. Has the value ipv4.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tnCesIpv4Addr 1.3.6.1.4.1.868.2.5.60.1.8.2
The IPv4 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv4 address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnCesIpv4PrefixLength 1.3.6.1.4.1.868.2.5.60.1.8.3
The prefix length associated with the CES IPv4 address.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32  

tnCesIpv6AddrType 1.3.6.1.4.1.868.2.5.60.1.8.4
The IP address type associated with tnCesIpv6Addr. Has the value ipv6.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tnCesIpv6Addr 1.3.6.1.4.1.868.2.5.60.1.8.5
The IPv6 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnCesIpv6PrefixLength 1.3.6.1.4.1.868.2.5.60.1.8.6
The prefix length associated with the CES IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..32  

tnCesClockPriority 1.3.6.1.4.1.868.2.5.60.1.9
OBJECT IDENTIFIER    

tnCesMiscClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.1
Table of clock priorities for miscellaneous sources.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesMiscClockPriorityEntry

tnCesMiscClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.1.1
Each entry has the clock priority for a particular clock source.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesMiscClockPriorityEntry  

tnCesMiscClockPriorityItem 1.3.6.1.4.1.868.2.5.60.1.9.1.1.1
Which clock source this clock priority is for.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER internal(1)  

tnCesMiscClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.1.1.2
The clock priority of a clock source. A lower numeric value indicates a higher priority.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..19  

tnCesPRIClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.2
Table of clock priorities for TDM ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesPRIClockPriorityEntry

tnCesPRIClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.2.1
Each entry has the clock priority for a TDM port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesPRIClockPriorityEntry  

tnCesPRIClockPriorityIndex 1.3.6.1.4.1.868.2.5.60.1.9.2.1.1
Which TDM port this clock priority is for.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesPRIClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.2.1.2
The clock priority of a TDM port. A lower numeric value indicates a higher priority.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..19  

tnCesLLClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.3
Table of clock priorities for logical link clock streams.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLClockPriorityEntry

tnCesLLClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.3.1
Each entry has the clock priority for a logical link clock stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLClockPriorityEntry  

tnCesLLClockPriorityIndex 1.3.6.1.4.1.868.2.5.60.1.9.3.1.1
Which logical link clocking stream this clock priority is for.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4  

tnCesLLClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.3.1.2
The clock priority of a logical link clock stream. A lower numeric value indicates a higher priority.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..19  

tnCesMulticastJoinTable 1.3.6.1.4.1.868.2.5.60.1.10
Table of multicast groups to join.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesMulticastJoinEntry

tnCesMulticastJoinEntry 1.3.6.1.4.1.868.2.5.60.1.10.1
Each entry has the configuration for a multicast group to join.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesMulticastJoinEntry  

tnCesMulticastJoinIndex 1.3.6.1.4.1.868.2.5.60.1.10.1.1
Index of multicast group.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4  

tnCesMulticastJoinAction 1.3.6.1.4.1.868.2.5.60.1.10.1.2
Whether to join a multicast group. When true, join the group specified by tnCesMulticastJoinAddr. When false, do not join any group and leave any previously joined goup.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesMulticastJoinAddrType 1.3.6.1.4.1.868.2.5.60.1.10.1.3
The IP address type of the multicast group to join. Must be ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

tnCesMulticastJoinAddr 1.3.6.1.4.1.868.2.5.60.1.10.1.4
The IP address of the multicast group to join. This must be a multicast address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnCesTDMTable 1.3.6.1.4.1.868.2.5.60.1.11
Table of TDM ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesTDMEntry

tnCesTDMEntry 1.3.6.1.4.1.868.2.5.60.1.11.1
Each entry has the configuration for a TDM port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesTDMEntry  

tnCesTDMPortNumber 1.3.6.1.4.1.868.2.5.60.1.11.1.1
The TDM port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesTDMPresentation 1.3.6.1.4.1.868.2.5.60.1.11.1.2
Network or user presentation. This options is not supported on all products. Modifications will be ignore on such products.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER te(0), nt(1)  

tnCesTDMFraming 1.3.6.1.4.1.868.2.5.60.1.11.1.3
Whether the TDM port operates in framed fractional or unframed full mode. It is not possible to set a port mode which would exclude any TDM channels that are assigned to a logical link (see tnCesLLChanSelectUsed). Any such channel must be deassigned first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER full(0), fractional(1)  

tnCesTDMMode 1.3.6.1.4.1.868.2.5.60.1.11.1.4
TDM port mode T1 or E1. It is not possible to set a port mode which would exclude any TDM channels that are assigned to a logical link (see tnCesLLChanSelectUsed). Any such channel must be deassigned first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER e1(0), t1(1)  

tnCesTDMTS0Passthrough 1.3.6.1.4.1.868.2.5.60.1.11.1.5
Whether timeslot zero is passed in E1 fractional mode. Only valid when tnCesTDMFraming is fractional and tnCesTDMMode is E1.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMCRC4 1.3.6.1.4.1.868.2.5.60.1.11.1.6
Whether the TDM framing uses CRC4. Only valid when tnCesTDMFraming is fractional.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMShutdownCallsOnFail 1.3.6.1.4.1.868.2.5.60.1.11.1.7
Whether to shutdown the CES connections or ISDN calls using this port when the port fails.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMImpedance 1.3.6.1.4.1.868.2.5.60.1.11.1.8
Electrical impedance of the TDM port, 75ohms or 120ohms.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER impedance120ohms(0), impedance75ohms(1)  

tnCesTDMT1Framing 1.3.6.1.4.1.868.2.5.60.1.11.1.9
The frame structure in T1 mode. Only used when tnCesTDMMode is T1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER esf(0), d4(1)  

tnCesTDMT1LineCode 1.3.6.1.4.1.868.2.5.60.1.11.1.10
The line code in T1 mode. Only used when tnCesTDMMode is T1.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b8zs(0), ami(1)  

tnCesTDMT1LoopCodeType 1.3.6.1.4.1.868.2.5.60.1.11.1.11
The type of loop code which when detected on the port will cause loops to be switched on or off.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fac1(0), fac2(1), fac3(2), user(3)  

tnCesTDMT1LoopCodeRxEnable 1.3.6.1.4.1.868.2.5.60.1.11.1.12
Whether detection of loop codes is enabled or disabled on the port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMT1LoopCodeUserUp 1.3.6.1.4.1.868.2.5.60.1.11.1.13
User defined bit pattern to cause loop up for the FACU option.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tnCesTDMT1LoopCodeUserDown 1.3.6.1.4.1.868.2.5.60.1.11.1.14
User defined bit pattern to cause loop down for the FACU option.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tnCesTDMT1LoopCodeUserLength 1.3.6.1.4.1.868.2.5.60.1.11.1.15
The number of bits in tnCesTDMT1LoopCodeUserUp and tnCesTDMT1LoopCodeUserDown.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 4..8  

tnCesTDMDTE 1.3.6.1.4.1.868.2.5.60.1.11.1.16
Whether the port is configured as DTE (true) or DCE (false). Only applies to Contra ports.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLTable 1.3.6.1.4.1.868.2.5.60.1.12
Table of logical link configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLEntry

tnCesLLEntry 1.3.6.1.4.1.868.2.5.60.1.12.1
Each entry has the current configuration of a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLEntry  

tnCesLLNumber 1.3.6.1.4.1.868.2.5.60.1.12.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLname 1.3.6.1.4.1.868.2.5.60.1.12.1.2
An optional name for the logical link.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..31)  

tnCesLLDirection 1.3.6.1.4.1.868.2.5.60.1.12.1.3
Direction of data flow over the packet network for a logical link.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), rx(1), tx(2), both(3)  

tnCesLLRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.12.1.4
The IP address type of the remote end of the logical link. Must be ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

tnCesLLRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.12.1.5
The IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDirection is rx then this must be a unicast address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnCesLLSecondaryRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.12.1.6
The secondary IP address type of the remote end of the logical link. Must be ipv4 or ipv6.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddressType  

tnCesLLSecondaryRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.12.1.7
The secondary IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDirection is rx then this must be a unicast address.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

tnCesLLQosType 1.3.6.1.4.1.868.2.5.60.1.12.1.8
Whether logical link QOS is encoded as Type of Service (TOS) or Diffserv.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tos(0), diffserv(1)  

tnCesLLQosTOS 1.3.6.1.4.1.868.2.5.60.1.12.1.9
Type Of Service value for logical link QOS. Only used when tnCesLLQosType is tos.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..255  

tnCesLLQosDiffserv 1.3.6.1.4.1.868.2.5.60.1.12.1.10
Diffserv codepoint value for logical link QOS. Only used when tnCesLLQosType is diffserv.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..63  

tnCesLLVlanTag 1.3.6.1.4.1.868.2.5.60.1.12.1.11
Whether Ethernet frames for this logical link are VLAN tagged.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLVlanId 1.3.6.1.4.1.868.2.5.60.1.12.1.12
VLAN ID for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..4094  

tnCesLLVlanPriority 1.3.6.1.4.1.868.2.5.60.1.12.1.13
Priority value for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..7  

tnCesLLJitterBufferLength 1.3.6.1.4.1.868.2.5.60.1.12.1.14
Jitter buffer length in ms for this logical link.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..400  

tnCesLLFramesPerPacket 1.3.6.1.4.1.868.2.5.60.1.12.1.15
In framed mode, the number of TDM frames in the packet payload for this logical link.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLRemoteLinkNumber 1.3.6.1.4.1.868.2.5.60.1.12.1.16
The remote logical link number that this link exchanges packets with.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLSchedTable 1.3.6.1.4.1.868.2.5.60.1.13
Table of logical link schedule configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLSchedEntry

tnCesLLSchedEntry 1.3.6.1.4.1.868.2.5.60.1.13.1
Each entry has the current configuration of a logical link schedule.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLSchedEntry  

tnCesLLSchedNumber 1.3.6.1.4.1.868.2.5.60.1.13.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLSchedEnable 1.3.6.1.4.1.868.2.5.60.1.13.1.2
Whether to enable the logical link schedule. When false, there is no scheduling and this link is always on. When true, the link is enabled according to its schedule.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLSchedStartTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.13.1.3
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.13.1.4
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.13.1.5
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.13.1.6
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.13.1.7
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.13.1.8
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.13.1.9
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.13.1.10
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.13.1.11
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.13.1.12
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.13.1.13
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.13.1.14
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.13.1.15
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.13.1.16
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.13.1.17
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.13.1.18
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.13.1.19
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.13.1.20
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.13.1.21
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.13.1.22
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.13.1.23
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.13.1.24
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.13.1.25
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.13.1.26
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStartTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.13.1.27
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStartTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.13.1.28
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLSchedStopTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.13.1.29
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLSchedStopTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.13.1.30
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJATable 1.3.6.1.4.1.868.2.5.60.1.14
Table of logical link dynamic jitter buffer adjustment configuration.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLJAEntry

tnCesLLJAEntry 1.3.6.1.4.1.868.2.5.60.1.14.1
Each entry has the current dynamic jitter adjustment configuration of a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLJAEntry  

tnCesLLJANumber 1.3.6.1.4.1.868.2.5.60.1.14.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLJitterAdjustmentMode 1.3.6.1.4.1.868.2.5.60.1.14.1.2
The mode in which automatic jitter buffer adustment is to be run. None - No automatic adjuistment of the jitter buffer will be carried out for this logical link. Always - Automatic jitter buffer adjustment is carried out periodically for this logical link while it is active. Schedule - Automatic jitter buffer adjustment is carried out periodically while this link is active during the specified schedule times. Once - Automatic jitter buffer adjustment is carried out once after this logical link becomes active.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), always(1), schedule(2), once(3)  

tnCesLLJitterAdjustmentAfter 1.3.6.1.4.1.868.2.5.60.1.14.1.3
How long to wait in minutes before doing any jitter buffer adjustment once the logical link has become active. Only used when tnCesLLJitterAdjustmentMode is always or once.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 3..999  

tnCesLLJASchedStartTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.14.1.4
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.14.1.5
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.14.1.6
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.14.1.7
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.14.1.8
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.14.1.9
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.14.1.10
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.14.1.11
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.14.1.12
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.14.1.13
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.14.1.14
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.14.1.15
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.14.1.16
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.14.1.17
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.14.1.18
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.14.1.19
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.14.1.20
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.14.1.21
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.14.1.22
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.14.1.23
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.14.1.24
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.14.1.25
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.14.1.26
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.14.1.27
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStartTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.14.1.28
Hours component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStartTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.14.1.29
Minutes component of schedule start time. The start time must not be later than the stop time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLJASchedStopTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.14.1.30
Hours component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..23  

tnCesLLJASchedStopTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.14.1.31
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0..59  

tnCesLLChanSelectTable 1.3.6.1.4.1.868.2.5.60.1.15
Table of TDM channels selected for a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLChanSelectEntry

tnCesLLChanSelectEntry 1.3.6.1.4.1.868.2.5.60.1.15.1
Each entry has the channel selection configuration of a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLChanSelectEntry  

tnCesLLChanSelectLLNumber 1.3.6.1.4.1.868.2.5.60.1.15.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLChanSelectPortNumber 1.3.6.1.4.1.868.2.5.60.1.15.1.2
The TDM or RS530 port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesLLChanSelectAvailable 1.3.6.1.4.1.868.2.5.60.1.15.1.3
Bitmap of whether each channel on this TDM port is available for use by this logical link. Channels are unavailable if they unavailable in the TDM port configuration (full/fractional/E1/T1) or are already selected for another logical link. Bit 0 is for the first channel, bit one for the second, etc.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesLLChanSelectUsed 1.3.6.1.4.1.868.2.5.60.1.15.1.4
Bitmap of whether each channel on this TDM port is assigned for use by this logical link. A channel cannot be assigned to a logical link if the channel is unavailable in the TDM port configuration (full/fractional/E1/T1), the channel is already assigned to another logical link, the channel is on a different TDM port from other channels in this link, or the logical link would have more than 32 channels assigned. Bit 0 is for the first channel, bit one for the second, etc. For products with RS530 ports, this item is ignored. The channels used will be configured automatically from the serial port bitrate whenever this table entry is updated.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

tnCesLLAlternateTable 1.3.6.1.4.1.868.2.5.60.1.16
Table of logical link configuration items for the alternate clocking mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLAlternateEntry

tnCesLLAlternateEntry 1.3.6.1.4.1.868.2.5.60.1.16.1
Each entry has the logical link configuration for the alternate clocking mode.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLAlternateEntry  

tnCesLLAlternateLLNumber 1.3.6.1.4.1.868.2.5.60.1.16.1.1
The clocking stream / logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4  

tnCesLLPlesiosynchronous 1.3.6.1.4.1.868.2.5.60.1.16.1.2
Whether clocking for stream is plesiosynchronous. Only used when tnCesClockingAlternateEnable is true.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLAsymmetric 1.3.6.1.4.1.868.2.5.60.1.16.1.3
Asymmetric clocking mode. Only applies when the associated TDM port is full and when tnCesClockingAlternateEnable is true.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLBytesPerPacketRx 1.3.6.1.4.1.868.2.5.60.1.16.1.4
In unframed mode, the number of bytes in the packet payload for the logical link in the receive direction.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1500  

tnCesLLBytesPerPacketTx 1.3.6.1.4.1.868.2.5.60.1.16.1.5
In unframed mode, the number of bytes in the packet payload for the logical link in the transmit direction.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..1500  

tnCesLLStatusTable 1.3.6.1.4.1.868.2.5.60.1.17
Table of logical link status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesLLStatusEntry

tnCesLLStatusEntry 1.3.6.1.4.1.868.2.5.60.1.17.1
Each entry has the current status of a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesLLStatusEntry  

tnCesLLStatusNumber 1.3.6.1.4.1.868.2.5.60.1.17.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLStatusEnabled 1.3.6.1.4.1.868.2.5.60.1.17.1.2
Whether the logical link is enabled for use.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusActive 1.3.6.1.4.1.868.2.5.60.1.17.1.3
Whether the logical link is active.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusArpResolved 1.3.6.1.4.1.868.2.5.60.1.17.1.4
Whether address resolution has been completed for the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusNumberOfChannels 1.3.6.1.4.1.868.2.5.60.1.17.1.5
The number of TDM channels being transported by this logical link.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..32  

tnCesLLStatusRemoteMac 1.3.6.1.4.1.868.2.5.60.1.17.1.6
The MAC address of the remote end of the logical link, or the gateway MAC address when the remote end is on a different IP subnet.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

tnCesLLStatusRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.17.1.7
The IP address type of the remote end of the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddressType  

tnCesLLStatusRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.17.1.8
The IP address of the remote end of the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  InetAddress  

tnCesLLStatusRemoteContextKnown 1.3.6.1.4.1.868.2.5.60.1.17.1.9
Whether the logical link number on the remote end is known.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusRemoteContextNumber 1.3.6.1.4.1.868.2.5.60.1.17.1.10
The logical link number on the remote end (if known).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesLLStatusRemotePortKnown 1.3.6.1.4.1.868.2.5.60.1.17.1.11
Whether the UDP port number of the remote end of the logical link is known.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusRemotePort 1.3.6.1.4.1.868.2.5.60.1.17.1.12
The UDP port number of the remote end of the logical link (if known).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..65535  

tnCesLLStatusQueueLengthValid 1.3.6.1.4.1.868.2.5.60.1.17.1.13
Whether the jitter buffer statistics are available for the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesLLStatusMinQueueLength 1.3.6.1.4.1.868.2.5.60.1.17.1.14
The minimum fill level of the logical link jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesLLStatusMaxQueueLength 1.3.6.1.4.1.868.2.5.60.1.17.1.15
The maximum fill level of the logical link jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesLLStatusAveQueueLengthWhole 1.3.6.1.4.1.868.2.5.60.1.17.1.16
The average fill level of the logical link jitter buffer. Whole part before the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesLLStatusAveQueueLengthFrac 1.3.6.1.4.1.868.2.5.60.1.17.1.17
The average fill level of the logical link jitter buffer. Fractional part after the decimal point.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

tnCesLLStatusEarly 1.3.6.1.4.1.868.2.5.60.1.17.1.18
The number of packets which arrived too early to be put into the logical link jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusLate 1.3.6.1.4.1.868.2.5.60.1.17.1.19
The number of packets which arrived too late to be put into the logical link jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusUnderrun 1.3.6.1.4.1.868.2.5.60.1.17.1.20
The number of underruns on the TDM interface caused by missing packets in the logical link jitter buffer.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusLastSequence 1.3.6.1.4.1.868.2.5.60.1.17.1.21
The sequence number of the last packet received for the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusPacketsRx 1.3.6.1.4.1.868.2.5.60.1.17.1.22
The number of packets received on the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusPacketsTx 1.3.6.1.4.1.868.2.5.60.1.17.1.23
The number of packets transmitted on the logical link.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusSlipsReduceCount 1.3.6.1.4.1.868.2.5.60.1.17.1.24
The number of times the jitter buffer has been slipped to reduced latency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLStatusSlipsExtendCount 1.3.6.1.4.1.868.2.5.60.1.17.1.25
The number of times the jitter buffer has been slipped to extend latency.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

tnCesLLLocalLoop 1.3.6.1.4.1.868.2.5.60.1.17.1.26
Whether the logical link local loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLRemoteLoop 1.3.6.1.4.1.868.2.5.60.1.17.1.27
Whether the logical link remote loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesLLNudge 1.3.6.1.4.1.868.2.5.60.1.17.1.28
The number of packets by which to nudge the jitter buffer for this logical link. A positive number extends the latency, a negative number reduces the latency, zero has no effect.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 -128..128  

tnCesLLResetErrorStats 1.3.6.1.4.1.868.2.5.60.1.17.1.29
Set to true to reset the jitter buffer error counts for this logical link.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMStatusTable 1.3.6.1.4.1.868.2.5.60.1.18
Table of TDM port status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesTDMStatusEntry

tnCesTDMStatusEntry 1.3.6.1.4.1.868.2.5.60.1.18.1
Each entry has the current status of a TDM port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesTDMStatusEntry  

tnCesTDMStatusNumber 1.3.6.1.4.1.868.2.5.60.1.18.1.1
The TDM port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesTDMStatusPhysical 1.3.6.1.4.1.868.2.5.60.1.18.1.2
Physical layer state of the TDM port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

tnCesTDMStatusRxSignalLevel 1.3.6.1.4.1.868.2.5.60.1.18.1.3
Receive signal level on the TDM port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

tnCesTDMStatusRxError 1.3.6.1.4.1.868.2.5.60.1.18.1.4
Receive error status of the TDM port.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

tnCesTDMLocalLoop 1.3.6.1.4.1.868.2.5.60.1.18.1.5
Whether the TDM port local loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMRemoteLoop 1.3.6.1.4.1.868.2.5.60.1.18.1.6
Whether the TDM port remote loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesTDMBreakCalls 1.3.6.1.4.1.868.2.5.60.1.18.1.7
Set to true to break the CES connections or ISDN calls active on this port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesCallStatusTable 1.3.6.1.4.1.868.2.5.60.1.19
Table of calls.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesCallStatusEntry

tnCesCallStatusEntry 1.3.6.1.4.1.868.2.5.60.1.19.1
Each entry has the current status of a CES call.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesCallStatusEntry  

tnCesCallStatusNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.1
The CES call number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesCallStatusStartTime 1.3.6.1.4.1.868.2.5.60.1.19.1.2
Time the call was started.
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

tnCesCallStatusSource 1.3.6.1.4.1.868.2.5.60.1.19.1.3
Source interface of the call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

tnCesCallStatusDestination 1.3.6.1.4.1.868.2.5.60.1.19.1.4
Destination interface of the call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..20)  

tnCesCallStatusOriginator 1.3.6.1.4.1.868.2.5.60.1.19.1.5
Whether this system originated the call.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesCallStatusDestinationNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.6
Destination number of the call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

tnCesCallStatusSourceNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.7
Source number of the call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..100)  

tnCesCallStatusState 1.3.6.1.4.1.868.2.5.60.1.19.1.8
State of the call.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  

tnCesClockStatusTable 1.3.6.1.4.1.868.2.5.60.1.20
Table of clock recovery status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesClockStatusEntry

tnCesClockStatusEntry 1.3.6.1.4.1.868.2.5.60.1.20.1
Each entry has the current status of a CES clock stream.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesClockStatusEntry  

tnCesClockStatusStreamNumber 1.3.6.1.4.1.868.2.5.60.1.20.1.1
The CES clock stream number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4  

tnCesClockStatusStreamStatus 1.3.6.1.4.1.868.2.5.60.1.20.1.2
Status of the clock recovery on the clock stream.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER freerun(0), holdover(1), acquiring(2), acquired(3)  

tnCesClockStatusStreamMode 1.3.6.1.4.1.868.2.5.60.1.20.1.3
The clock recovery algorithm running on the clock stream, or disabled if no clock recovery is running.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER clockRecoveryDisabled(0), adaptive(1), adaptiveEnhanced(2), adaptiveFrequency(3)  

tnCesClockStatusStreamDCO 1.3.6.1.4.1.868.2.5.60.1.20.1.4
Recovered clock frequency offset in PPB. NB Limited to 32 bit range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tnCesClockStatusStreamDCOMin 1.3.6.1.4.1.868.2.5.60.1.20.1.5
Minimum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tnCesClockStatusStreamDCOMax 1.3.6.1.4.1.868.2.5.60.1.20.1.6
Maximum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tnCesClockStatusStreamDCOAvg 1.3.6.1.4.1.868.2.5.60.1.20.1.7
Average value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

tnCesDebug 1.3.6.1.4.1.868.2.5.60.1.21
OBJECT IDENTIFIER    

tnCesDebugTDMTable 1.3.6.1.4.1.868.2.5.60.1.21.1
Table of TDM port debug settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesDebugTDMEntry

tnCesDebugTDMEntry 1.3.6.1.4.1.868.2.5.60.1.21.1.1
Each entry has the debug setting for a TDM port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesDebugTDMEntry  

tnCesDebugTDMPortNumber 1.3.6.1.4.1.868.2.5.60.1.21.1.1.1
The TDM port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesDebugTDMPortEnable 1.3.6.1.4.1.868.2.5.60.1.21.1.1.2
Whether to enable (true) or disable (false) debug on this TDM port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesDebugLLTable 1.3.6.1.4.1.868.2.5.60.1.21.2
Table of logical link debug settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesDebugLLEntry

tnCesDebugLLEntry 1.3.6.1.4.1.868.2.5.60.1.21.2.1
Each entry has the current debug setting for a logical link.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesDebugLLEntry  

tnCesDebugLLNumber 1.3.6.1.4.1.868.2.5.60.1.21.2.1.1
The logical link number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..128  

tnCesDebugLLEnable 1.3.6.1.4.1.868.2.5.60.1.21.2.1.2
Whether to enable (true) or disable (false) debug on this logical link.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesDebugMiscTable 1.3.6.1.4.1.868.2.5.60.1.21.3
Table of miscellaneous debug settings.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesDebugMiscEntry

tnCesDebugMiscEntry 1.3.6.1.4.1.868.2.5.60.1.21.3.1
Each entry has the current debug setting for a miscellaneous item.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesDebugMiscEntry  

tnCesDebugMiscItem 1.3.6.1.4.1.868.2.5.60.1.21.3.1.1
The debug item to enable or disable.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER control(1), arp(2), sip(3), logicalLinkControl(4), logicalLinkGlobal(5)  

tnCesDebugMiscEnable 1.3.6.1.4.1.868.2.5.60.1.21.3.1.2
Whether to enable (true) or disable (false) debug for this item.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesRS530Table 1.3.6.1.4.1.868.2.5.60.1.22
Table of RS530 serial ports.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesRS530Entry

tnCesRS530Entry 1.3.6.1.4.1.868.2.5.60.1.22.1
Each entry has the configuration for a RS530 serial port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesRS530Entry  

tnCesRS530PortNumber 1.3.6.1.4.1.868.2.5.60.1.22.1.1
The RS530 serial port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesRS530Rate 1.3.6.1.4.1.868.2.5.60.1.22.1.2
The RS530 serial port bit rate in bits per second. Valid rates are 64K to 2048K in 64K steps, or one of the following subrates: 38400, 19200, 9600, 4800, 2400.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

tnCesRS530ShutdownCallsOnFail 1.3.6.1.4.1.868.2.5.60.1.22.1.3
Whether to shutdown the CES connections using this port when the port fails.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesRS530StatusTable 1.3.6.1.4.1.868.2.5.60.1.23
Table of RS530 serial port status.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TnCesRS530StatusEntry

tnCesRS530StatusEntry 1.3.6.1.4.1.868.2.5.60.1.23.1
Each entry has the current status of a RS530 serial port.
Status: current Access: not-accessible
OBJECT-TYPE    
  TnCesRS530StatusEntry  

tnCesRS530StatusNumber 1.3.6.1.4.1.868.2.5.60.1.23.1.1
The RS530 serial port number.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..32  

tnCesRS530InterfaceType 1.3.6.1.4.1.868.2.5.60.1.23.1.2
Describes the type of physical interface used by the RS530 serial.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..50)  

tnCesRS530StatusDTR 1.3.6.1.4.1.868.2.5.60.1.23.1.3
Status of the RS530 serial port C/DTR lead.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesRS530StatusDCD 1.3.6.1.4.1.868.2.5.60.1.23.1.4
Status of the RS530 serial port I/DCD lead.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesRS530StatusRTS 1.3.6.1.4.1.868.2.5.60.1.23.1.5
Status of the RS530 serial port RTS lead.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesRS530StatusCTS 1.3.6.1.4.1.868.2.5.60.1.23.1.6
Status of the RS530 serial port CTS lead.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesRS530StatusDSR 1.3.6.1.4.1.868.2.5.60.1.23.1.7
Status of the RS530 serial port DSR lead.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

tnCesRS530LocalLoop 1.3.6.1.4.1.868.2.5.60.1.23.1.8
Whether the RS530 serial port local loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesRS530RemoteLoop 1.3.6.1.4.1.868.2.5.60.1.23.1.9
Whether the RS530 port remote loop is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesRS530BreakCalls 1.3.6.1.4.1.868.2.5.60.1.23.1.10
Set to true to break the CES connections or ISDN calls active on this port.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

tnCesEventDetails 1.3.6.1.4.1.868.2.5.60.0.1
Text information describing the event that has occurred.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

tnCesEventPriority 1.3.6.1.4.1.868.2.5.60.0.2
Priority of this event.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 1..6  

tnCesGeneralEvent 1.3.6.1.4.1.868.2.5.60.0.3.0.1
Notification of an event relating to CES.
Status: current Access: read-only
NOTIFICATION-TYPE    

tnCesGroup 1.3.6.1.4.1.868.2.5.60.2.2.1
Objects which implement CES support on a device.
Status: current Access: read-only
OBJECT-GROUP    

tnCesTrapGroup 1.3.6.1.4.1.868.2.5.60.2.2.2
Notifications which implement CES support on a device.
Status: current Access: read-only
NOTIFICATION-GROUP    

tnCesMIBCompliance 1.3.6.1.4.1.868.2.5.60.2.1.1
You will comply. Respect my authority!
Status: current Access: read-only
MODULE-COMPLIANCE    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor