TELSEY-STB-MIB

File: TELSEY-STB-MIB.mib (20974 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB

Imported symbols

IpAddress OBJECT-TYPE DisplayString

Defined Values

telsey 1.3.6.1.4.1.10171
OBJECT IDENTIFIER    

stb 1.3.6.1.4.1.10171.2
OBJECT IDENTIFIER    

stbInfo 1.3.6.1.4.1.10171.2.1
OBJECT IDENTIFIER    

hwVersion 1.3.6.1.4.1.10171.2.1.1
Read STB hardware version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

swVersion 1.3.6.1.4.1.10171.2.1.2
Read STB software version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

vendorVersion 1.3.6.1.4.1.10171.2.1.3
Read STB vendor name (always 'telsey').
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

collectLog 1.3.6.1.4.1.10171.2.1.4
Collect STB log.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(0), create(1)  

stbStatus 1.3.6.1.4.1.10171.2.1.5
Get/Set STB status, including standby
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER running(0), outportsOff(1), browserDown(2), fullStandby(3)  

stbNetwork 1.3.6.1.4.1.10171.2.2
OBJECT IDENTIFIER    

networkIP 1.3.6.1.4.1.10171.2.2.1
OBJECT IDENTIFIER    

ipMode 1.3.6.1.4.1.10171.2.2.1.1
Upgrade STB firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

ipAddress 1.3.6.1.4.1.10171.2.2.1.2
Get/Set STB IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipNetmask 1.3.6.1.4.1.10171.2.2.1.3
Get/Set STB IP netmask.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipGateway 1.3.6.1.4.1.10171.2.2.1.4
Get/Set STB IP gateway.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

ipDNS 1.3.6.1.4.1.10171.2.2.1.5
Get/Set STB IP DNS.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

networkTime 1.3.6.1.4.1.10171.2.2.2
OBJECT IDENTIFIER    

timeActive 1.3.6.1.4.1.10171.2.2.2.1
Upgrade STB firmware.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

timeServer 1.3.6.1.4.1.10171.2.2.2.2
Get/Set STB Network Time server IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

timeZone 1.3.6.1.4.1.10171.2.2.2.3
Get/Set STB Timezone Country.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

systemUpgrade 1.3.6.1.4.1.10171.2.3
OBJECT IDENTIFIER    

upgradeActivate 1.3.6.1.4.1.10171.2.3.1
Active means it checks for newer image from network at boot time.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

upgradeMode 1.3.6.1.4.1.10171.2.3.2
Get/Set upgrade mode.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dynamic(1)  

upgradeMulticastGroup 1.3.6.1.4.1.10171.2.3.3
Get/Set Multicast IP Group.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

upgradeMulticastPort 1.3.6.1.4.1.10171.2.3.4
Get/Set Multicast Port.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

upgradeTftpIpAddress 1.3.6.1.4.1.10171.2.3.5
Get/Set TFTP Server IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

upgradeTftpFileName 1.3.6.1.4.1.10171.2.3.6
Get/Set Upgrade Package Name in the TFTP server.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

upgradeMultipleServer 1.3.6.1.4.1.10171.2.3.7
Get/Set list of HTTP URLs.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

upgradeRestoreInfo 1.3.6.1.4.1.10171.2.3.8
Restore Info for Upgrade .
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER not-needed(0), do-done(1), error(2)  

stbSystem 1.3.6.1.4.1.10171.2.4
OBJECT IDENTIFIER    

tvSignal 1.3.6.1.4.1.10171.2.4.1
Get/Set STB TV signal. Some TV with RGB input only doesn't want Composite input signal.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER rgbComposite(1), compositeOnly(2), svideo(3)  

tvHdmiActivate 1.3.6.1.4.1.10171.2.4.2
Enable/Disable HDMI.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

tvHdmiMode 1.3.6.1.4.1.10171.2.4.3
Get/Set HDMI format
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER format480i60(0), format576p50(1), format576i50(2), format720p50(3), format720p60(4), format1080i50(5), format1080i60(6), formatVESA1440x900at60(7), formatVESA1600x1200at60(8)  

tvFormat 1.3.6.1.4.1.10171.2.4.4
Get/Set STB TV format. Normal 4:3 (3), Wide 16:9 (2), 4:3 Letterbox (1)
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER letterbox(1), wide(2), normal(3)  

tvBootAutoSwitch 1.3.6.1.4.1.10171.2.4.5
Get/Set STB TV autoswitch during boot up sequence.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

tvAudio 1.3.6.1.4.1.10171.2.4.6
Get/Set STB TV audio volume.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 0..30  

stbBrowser 1.3.6.1.4.1.10171.2.5
OBJECT IDENTIFIER    

browserHomepage 1.3.6.1.4.1.10171.2.5.1
Get/Set STB T-Browsing home page.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

browserURL 1.3.6.1.4.1.10171.2.5.2
Get/Set STB T-Browsing home page.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

browserProxy 1.3.6.1.4.1.10171.2.5.3
OBJECT IDENTIFIER    

proxyMethod 1.3.6.1.4.1.10171.2.5.3.1
Get/Set method to use to set proxy.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER direct(0), manual(1), download(2), acs(3)  

proxyServer 1.3.6.1.4.1.10171.2.5.3.2
Get/Set Proxy server IP address.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

browserWindow 1.3.6.1.4.1.10171.2.5.4
OBJECT IDENTIFIER    

windowMode 1.3.6.1.4.1.10171.2.5.4.1
Get/Set STB browser window mode
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER default(0), custom(1)  

windowWidth 1.3.6.1.4.1.10171.2.5.4.2
Get/Set STB browser window width in pixel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1920  

windowHeight 1.3.6.1.4.1.10171.2.5.4.3
Get/Set STB browser window height in pixel.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER 1..1080  

windowXPos 1.3.6.1.4.1.10171.2.5.4.4
Get/Set STB browser window X Position.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

windowYPos 1.3.6.1.4.1.10171.2.5.4.5
Get/Set STB browser window Y Position.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  


linkVisited 1.3.6.1.4.1.10171.2.5.5.1
Get/Set STB browser visited link color.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER blue(0), yellow(1)  

browserFont 1.3.6.1.4.1.10171.2.5.6
OBJECT IDENTIFIER    

fontSize 1.3.6.1.4.1.10171.2.5.6.1
Get/Set STB browser font size.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

browserLanguage 1.3.6.1.4.1.10171.2.5.7
Get/Set STB browser language.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER italian(0), english(1)  

browserToolbar 1.3.6.1.4.1.10171.2.5.8
OBJECT IDENTIFIER    

toolbarActivate 1.3.6.1.4.1.10171.2.5.8.1
Show / hide browser navigation toolbar.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

browserHomepageRollover 1.3.6.1.4.1.10171.2.5.9
Get/Set STB T-Browsing home page.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

browserDelay 1.3.6.1.4.1.10171.2.5.10
Get/Set Delay Browser Execution
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER  

stbPlayer 1.3.6.1.4.1.10171.2.6
OBJECT IDENTIFIER    

playerSubtitles 1.3.6.1.4.1.10171.2.6.1
OBJECT IDENTIFIER    

subtitlesActivate 1.3.6.1.4.1.10171.2.6.1.1
Show / hide videostreaming subtitles.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

subtitlesLanguage 1.3.6.1.4.1.10171.2.6.1.2
Get/Set STB videostreaming subtitles language.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER italian(0), english(1), french1(2), french2(3), german1(4), german2(5), norwegian(6), spanish(7), japanese(8)  

playerAudio 1.3.6.1.4.1.10171.2.6.2
OBJECT IDENTIFIER    

audioLanguage 1.3.6.1.4.1.10171.2.6.2.1
Get/Set STB videostreaming audio language.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER italian(0), english(1), french1(2), french2(3), german1(4), german2(5), norwegian(6), spanish(7), japanese(8)  

stbRemoteManager 1.3.6.1.4.1.10171.2.7
OBJECT IDENTIFIER    

remoteMGroup 1.3.6.1.4.1.10171.2.7.1
Get/Set Group to belong for the Remote Management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

remoteMUser 1.3.6.1.4.1.10171.2.7.2
Get/Set User for the Remote Management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

remoteMPwd 1.3.6.1.4.1.10171.2.7.3
Get/Set Password of the User for Remote Management.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString  

remoteMProtocol 1.3.6.1.4.1.10171.2.7.4
Get/Set Remote Management Protocol.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER snmp(0)  

remoteMEncryptActivate 1.3.6.1.4.1.10171.2.7.5
Active means use encryption at next reboot.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inactive(0), active(1)  

remoteMEncryptAlgo 1.3.6.1.4.1.10171.2.7.6
Get/Set Algorithm for the Encryption.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER des(0), aes(1)  

stbAction 1.3.6.1.4.1.10171.2.8
OBJECT IDENTIFIER    

actionReboot 1.3.6.1.4.1.10171.2.8.1
Reboot Set Top Box.
Status: mandatory Access: write-only
OBJECT-TYPE    
  INTEGER nothing(0), reboot(1)  

actionPing 1.3.6.1.4.1.10171.2.8.2
Return alive message.
Status: mandatory Access: read-write
OBJECT-TYPE    
  IpAddress  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor