TELDAT-MON-PROTOCOL-NAPT-MIB

File: TELDAT-MON-PROTOCOL-NAPT-MIB.mib (14432 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
TELDAT-SW-STRUCTURE-MIB

Imported symbols

IpAddress Counter OBJECT-TYPE
DisplayString telProdNpMonProtIP

Defined Types

TelProdNpMonProtIPNAPTEntry  
SEQUENCE    
  telProdNpMonProtIPNAPTIndex INTEGER
  telProdNpMonProtIPNAPTSrcAddr IpAddress
  telProdNpMonProtIPNAPTSrcPort INTEGER
  telProdNpMonProtIPNAPTNewPort INTEGER
  telProdNpMonProtIPNAPTAge INTEGER
  telProdNpMonProtIPNAPTDeltFst INTEGER
  telProdNpMonProtIPNAPTDeltSnd INTEGER

TelProdNpMonProtIPNAPTConnEntry  
SEQUENCE    
  telProdNpMonProtIPNAPTConnIndex INTEGER
  telProdNpMonProtIPNAPTConnSrcAddr IpAddress
  telProdNpMonProtIPNAPTConnSrcIdent INTEGER
  telProdNpMonProtIPNAPTConnNewIdent INTEGER
  telProdNpMonProtIPNAPTConnAge INTEGER

Defined Values

telProdNpMonProtIPNAPTMonit 1.3.6.1.4.1.2007.4.1.2.3.1.11
OBJECT IDENTIFIER    

telProdNpMonProtIPNAPTTable 1.3.6.1.4.1.2007.4.1.2.3.1.11.1
NAPT connections table: Network Address Port Translation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonProtIPNAPTEntry

telProdNpMonProtIPNAPTEntry 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1
Each entry is a NAPT connection in which a change of ports is performed (NAT of ports). It consists of an index that shows the position of the entry in the table, the source address, the source port, the new port to which it has been translated, the time passed since that entry was used for the last time and the delta values.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonProtIPNAPTEntry  

telProdNpMonProtIPNAPTIndex 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.1
Table index: position of the entry (NAPT connection).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTSrcAddr 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.2
Source IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonProtIPNAPTSrcPort 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.3
Source port.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTNewPort 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.4
New port: the port assigned after the translation. In the case the index and port number were different, this variable would take the value 0.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTAge 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.5
Time to live of the entry before being deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTDeltFst 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.6
First parameter related to the deltas. The deltas show the difference in the number of bytes that exist in the packets before and after the port and address translation in FTP connections. FTP connections are not clear thus they require changes inside the packets exchanged during the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTDeltSnd 1.3.6.1.4.1.2007.4.1.2.3.1.11.1.1.7
First parameter related to the deltas. The deltas show the difference in the number of bytes that exist in the packets before and after the port and address translation in FTP connections. FTP connections are not clear thus they require changes inside the packets exchanged during the connection.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTConnTable 1.3.6.1.4.1.2007.4.1.2.3.1.11.2
Table of the connections that do not use port and therefore they do not appear in the table of connections in which a port translation has occured. In these connections there is a change in the connection identifier. It belongs to NAPT.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonProtIPNAPTConnEntry

telProdNpMonProtIPNAPTConnEntry 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1
Each entry is one of the connections that do not use ports and therefore do not appear in the connections table with port change. There is a change in the connection identifier. It consists of an index that shows the entry position inside the table, the source address, the source identifier, the new assigned identifier and the time passed since the connection was used for the last time.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonProtIPNAPTConnEntry  

telProdNpMonProtIPNAPTConnIndex 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1.1
Table index: position of the current entry. Each entry keeps information about one of the connections with identifier change. This connections do not use ports thus it is impossible to change them and therefore they don't generate an entry in the table that keeps the connections with port translation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTConnSrcAddr 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1.2
Source IP address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonProtIPNAPTConnSrcIdent 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1.3
Source identifier (or initial).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTConnNewIdent 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1.4
New assigned identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTConnAge 1.3.6.1.4.1.2007.4.1.2.3.1.11.2.1.5
Time to live of the entry before being deleted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemory 1.3.6.1.4.1.2007.4.1.2.3.1.11.3
OBJECT IDENTIFIER    

telProdNpMonProtIPNAPTMemResPortAddrs 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.1
Number of port-address structures reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemUsedPorts 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.2
Number of port-address structures used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemReservPorts 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.3
Number of port structures reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemResIdentAddrs 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.4
Number of identifier-address structures reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemUsedIdent 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.5
Number of identifier-address structures used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTMemReservIdent 1.3.6.1.4.1.2007.4.1.2.3.1.11.3.6
Number of identifier structures reserved.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTPortInfo 1.3.6.1.4.1.2007.4.1.2.3.1.11.4
OBJECT IDENTIFIER    

telProdNpMonProtIPNAPTPortInfUsed 1.3.6.1.4.1.2007.4.1.2.3.1.11.4.1
Number of ports used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTPortInfFree 1.3.6.1.4.1.2007.4.1.2.3.1.11.4.2
Number of free ports.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTIdentInfo 1.3.6.1.4.1.2007.4.1.2.3.1.11.5
OBJECT IDENTIFIER    

telProdNpMonProtIPNAPTIdentInfUsed 1.3.6.1.4.1.2007.4.1.2.3.1.11.5.1
Number of interfaces used.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTIdentInfFree 1.3.6.1.4.1.2007.4.1.2.3.1.11.5.2
Number of free interfaces.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonProtIPNAPTStats 1.3.6.1.4.1.2007.4.1.2.3.1.11.6
OBJECT IDENTIFIER    

telProdNpMonProtIPNAPTStatsBadVers 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.1
Not processed packets due to wrong version.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsBadAddrSize 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.2
Not processed packets due to wrong header length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsBadChecksum 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.3
Not processed packets due to wrong checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsBadTcpCheck 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.4
Not processed packets due to wrong tcp checksum.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsPortsOutRange 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.5
Not processed packets as the received port is out of range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsIdentOutRange 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.6
Not processed packets as the identifier is out of range.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonProtIPNAPTStatsAddrDiff 1.3.6.1.4.1.2007.4.1.2.3.1.11.6.7
Not processed packets as IP address is different from the PPP interface address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor