TELDAT-MON-INTERF-WLAN-MIB

File: TELDAT-MON-INTERF-WLAN-MIB.mib (34619 bytes)

Imported modules

Imported symbols

OBJECT-TYPE	Counter32	MacAddress
DisplayString	TEXTUAL-CONVENTION	telProdNpMonInterfRouter

Defined Types

WlanRSSI
This type is used to represent receiver input levels in dBm.
TEXTUAL-CONVENTION
	INTEGER	-110..0

WlanRate
This type is used to represent WLAN data rates in 500 Kbps units.
TEXTUAL-CONVENTION
	INTEGER	0..600

TelProdNpMonInterfWlanRadioEntry
SEQUENCE
	telProdNpMonInterfWlanRadioIfIndex	INTEGER
	telProdNpMonInterfWlanRadioIfMode	INTEGER
	telProdNpMonInterfWlanRadioIfSpeed	INTEGER
	telProdNpMonInterfWlanRadioIfChannel	INTEGER
	telProdNpMonInterfWlanRadioIfRtsThreshold	INTEGER
	telProdNpMonInterfWlanRadioIfTxPower	INTEGER
	telProdNpMonInterfWlanRadioIfBand	INTEGER
	telProdNpMonInterfWlanRadioIfCountry	DisplayString
	telProdNpMonInterfWlanRadioIfAddress	MacAddress
	telProdNpMonInterfWlanRadioIfRealChannel	INTEGER
	telProdNpMonInterfWlanRadioIfFragmentThreshold	INTEGER

TelProdNpMonInterfWlanBSSEntry
SEQUENCE
	telProdNpMonInterfWlanBSSIfIndex	INTEGER
	telProdNpMonInterfWlanBSSId	DisplayString
	telProdNpMonInterfWlanBSSPrivInvoked	INTEGER
	telProdNpMonInterfWlanBSSRsn	INTEGER
	telProdNpMonInterfWlanBSSAkm	INTEGER
	telProdNpMonInterfWlanBSSCipher	INTEGER
	telProdNpMonInterfWlanBSSDefaultKey	INTEGER
	telProdNpMonInterfWlanBSSKey1	OCTET STRING
	telProdNpMonInterfWlanBSSKey2	OCTET STRING
	telProdNpMonInterfWlanBSSKey3	OCTET STRING
	telProdNpMonInterfWlanBSSKey4	OCTET STRING
	telProdNpMonInterfWlanBSSMaxAsoc	INTEGER
	telProdNpMonInterfWlanBSSAcl	INTEGER
	telProdNpMonInterfWlanBSSClientIsolation	INTEGER
	telProdNpMonInterfWlanBSSHidden	INTEGER
	telProdNpMonInterfWlanBSSBssId	MacAddress
	telProdNpMonInterfWlanBSSBeaconPeriod	INTEGER
	telProdNpMonInterfWlanBSSDTIMPeriod	INTEGER
	telProdNpMonInterfWlanBSSMSDUTx	Counter32
	telProdNpMonInterfWlanBSSMSDURx	Counter32
	telProdNpMonInterfWlanBSSBytesTx	Counter32
	telProdNpMonInterfWlanBSSBytesRx	Counter32
	telProdNpMonInterfWlanBSSCurrent	INTEGER
	telProdNpMonInterfWlanBSSOpMode	INTEGER

TelProdNpMonInterfWlanStationEntry
SEQUENCE
	telProdNpMonInterfWlanStationIfIndex	INTEGER
	telProdNpMonInterfWlanStationAddress	MacAddress
	telProdNpMonInterfWlanStationState	INTEGER
	telProdNpMonInterfWlanStationSecurity	INTEGER
	telProdNpMonInterfWlanStationNode	INTEGER
	telProdNpMonInterfWlanStationMSDUTx	Counter32
	telProdNpMonInterfWlanStationMSDURx	Counter32
	telProdNpMonInterfWlanStationBytesRx	Counter32
	telProdNpMonInterfWlanStationBytesTx	Counter32
	telProdNpMonInterfWlanStationRate	WlanRate
	telProdNpMonInterfWlanStationSignal	WlanRSSI
	telProdNpMonInterfWlanStationNoise	WlanRSSI
	telProdNpMonInterfWlanStationConnectTime	Counter32

TelProdNpMonInterfWlanACLEntry
SEQUENCE
	telProdNpMonInterfWlanACLIfIndex	INTEGER
	telProdNpMonInterfWlanACLAddress	MacAddress

TelProdNpMonInterfWlanScanResultsEntry
SEQUENCE
	telProdNpMonInterfWlanScanResultsIfIndex	INTEGER
	telProdNpMonInterfWlanScanResultsIndex	INTEGER
	telProdNpMonInterfWlanScanResultsBSSID	MacAddress
	telProdNpMonInterfWlanScanResultsSSID	DisplayString
	telProdNpMonInterfWlanScanResultsChannel	INTEGER
	telProdNpMonInterfWlanScanResultsSignal	WlanRSSI
	telProdNpMonInterfWlanScanResultsNoise	WlanRSSI
	telProdNpMonInterfWlanScanResultsBeaconPeriod	INTEGER
	telProdNpMonInterfWlanScanResultsRates	DisplayString
	telProdNpMonInterfWlanScanResultsBasicRates	DisplayString
	telProdNpMonInterfWlanScanResultsExtendedRates	DisplayString

TelProdNpMonInterfWlanWMMEntry
SEQUENCE
	telProdNpMonInterfWlanWMMAccCat	INTEGER
	telProdNpMonInterfWlanWMMwlanIf	INTEGER
	telProdNpMonInterfWlanWMMaCWmin	INTEGER
	telProdNpMonInterfWlanWMMaCWmax	INTEGER
	telProdNpMonInterfWlanWMMAifsn	INTEGER
	telProdNpMonInterfWlanWMMTxopLimit	INTEGER
	telProdNpMonInterfWlanWMMAckPolicy	INTEGER
	telProdNpMonInterfWlanWMMACM	INTEGER
	telProdNpMonInterfWlanWMMType	INTEGER

Defined Values

telProdNpMonInterfWlan		1.3.6.1.4.1.2007.4.1.2.2.2.24
OBJECT IDENTIFIER

telProdNpMonInterfWlanRadioTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.1
The telProdNpMonInterfWlanRadioTable contains information relating to the interfaces available on the system. Each entry corresponds to an available WLAN interface. Entries cannot be added or deleted by the user. Creating entries: Entries are created by the system automatically when a new WLAN module is installed. Deleting entries: Entries are removed by the system after the appropriate WLAN module is removed.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanRadioEntry

telProdNpMonInterfWlanRadioEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1
A base list of objects that are information about Wlan radio data. The index is the number of the interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanRadioEntry

telProdNpMonInterfWlanRadioIfIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.1
Unique radio index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanRadioIfMode		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.2
Mixed and compatibility modes between various 802.11 substandards.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	mode-11a(1), mode-11b(2), mode-11g(4), mode-11b-11g(6), mode-11n(8), mode-11a-11n(9), mode-11g-11n(12), mode-11b-11g-11n(14), mode-11a-11b-11g-11n(15)

telProdNpMonInterfWlanRadioIfSpeed		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.3
The value defines the bitrate or the coding scheme to use for data frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanRadioIfChannel		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.4
The physical channel
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-1..256

telProdNpMonInterfWlanRadioIfRtsThreshold		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.5
This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed, except as RTS/CTS is used as a cross modulation protection mechanism. An RTS/CTS handshake shall be performed at the beginning of any frame exchange sequence where the MPDU is of type Data or Management, the MPDU has an individual address in the Address1 field, and the length of the MPDU is greater than this threshold. Setting this attribute to be larger than the maximum MSDU size shall have the effect of turning off the RTS/CTS handshake for frames of Data or Management type transmitted by this STA. Setting this attribute to one shall have the effect of turning on the RTS/CTS handshake for all frames of Data or Management type transmitted by this STA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	-1..65535

telProdNpMonInterfWlanRadioIfTxPower		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.6
Transmitter output power in dBm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..63

telProdNpMonInterfWlanRadioIfBand		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.7
Frequency band.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanRadioIfCountry		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.8
This attribute identifies the country in which the station is operating. The first two octets of this string is the two character country code as described in document ISO/IEC 3166-1. The third octet shall be one of the following: 1. an ASCII space character, if the regulations under which the station is operating encompass all environments in the country, 2. an ASCII 'O' character, if the regulations under which the station is operating are for an Outdoor environment only, or 3. an ASCII 'I' character, if the regulations under which the station is operating are for an Indoor environment only.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..3)

telProdNpMonInterfWlanRadioIfAddress		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.9
The MAC Address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

telProdNpMonInterfWlanRadioIfRealChannel		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.10
The actually selected channel for transmit and receive. In most cases this is the same value as wlanIfChannel, except if automatic channel selection is active. In this case, this variable shows the channel in use.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..256

telProdNpMonInterfWlanRadioIfFragmentThreshold		1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11
This attribute shall specify the mandatory maximum size, in octets, of the PSDU that may be delivered to the PHY. This maximum size does not apply in the case of A-MPDU. An MSDU, A-MSDU or MMPDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU, A-MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY and shall never exceed the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	256..8000

telProdNpMonInterfWlanBSSTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.2
Describes a WLAN VSS and the correspondending settings
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanBSSEntry

telProdNpMonInterfWlanBSSEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1
A base list of objects that are information about BSS data. The index is the number of the interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanBSSEntry

telProdNpMonInterfWlanBSSIfIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.1
Unique BSS index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanBSSId		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.2
This attribute reflects the SSID.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

telProdNpMonInterfWlanBSSPrivInvoked		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.3
The Privacy Invoke setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), enable(2)

telProdNpMonInterfWlanBSSRsn		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.4
The Robust Security Network setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	wpa(0), wpa2(1), none(2)

telProdNpMonInterfWlanBSSAkm		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.5
The Authenticated Key Management setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	dot1x(0), psk(1)

telProdNpMonInterfWlanBSSCipher		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.6
The ciphers used.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(0), auto(1), wep(2), tkip(3), aes-ccm(4)

telProdNpMonInterfWlanBSSDefaultKey		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.7
Default key for WEP encryption.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	key1(1), key2(2), key3(3), key4(4)

telProdNpMonInterfWlanBSSKey1		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.8
Key string for WEP key no. 1. Also used for WPA passphrase.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..64)

telProdNpMonInterfWlanBSSKey2		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.9
Key string for WEP key no. 2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..33)

telProdNpMonInterfWlanBSSKey3		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.10
Key string for WEP key no. 3.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..33)

telProdNpMonInterfWlanBSSKey4		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.11
Key string for WEP key no. 4.
Status: mandatory	Access: read-only
OBJECT-TYPE
	OCTET STRING	Size(0..33)

telProdNpMonInterfWlanBSSMaxAsoc		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.12
The number of allowed clients of the requested BSS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..256

telProdNpMonInterfWlanBSSAcl		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.13
MAC Media Access Control via MAC Address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), deny-entries(1), allow-entries(2)

telProdNpMonInterfWlanBSSClientIsolation		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.14
Client isolation setting.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	disable(0), enable(1)

telProdNpMonInterfWlanBSSHidden		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.15
Define whether SSID is hidden (yes(2)) or not (no(1)).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	yes(2), no(1)

telProdNpMonInterfWlanBSSBssId		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.16
This object contains the actual current BSSID for the service set.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

telProdNpMonInterfWlanBSSBeaconPeriod		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.17
This attribute shall specify the number of TU that a station shall use for scheduling Beacon transmissions. This value is transmitted in Beacon and Probe Response frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

telProdNpMonInterfWlanBSSDTIMPeriod		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.18
This attribute shall specify the number of beacon intervals that shall elapse between transmission of Beacons frames containing a TIM element whose DTIM Count field is 0. This value is transmitted in the DTIM Period field of Beacon frames.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

telProdNpMonInterfWlanBSSMSDUTx		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.19
This attribute counts the total number of packets transmitted on this BSS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanBSSMSDURx		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.20
This attribute counts the total number of packets received by this BSS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanBSSBytesTx		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.21
Transmitted Bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanBSSBytesRx		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.22
Received Bytes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanBSSCurrent		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.23
Count of current associated stations
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanBSSOpMode		1.3.6.1.4.1.2007.4.1.2.2.2.24.2.1.24
This value specify that the scan properties is used for AP, client or wds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	access-point(0), station(1), wbr(2), repeater(3)

telProdNpMonInterfWlanStationTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.3
The telProdNpMonInterfWlanStation contains information relating to the clients currently associated to our access points. Each entry corresponds to an associated client station (STA). Entries cannot be added or deleted by the user. Creating entries: Entries are created by the system automatically when a new STA ia associated. Deleting entries: Entries are removed by the system whenever an associated STA is removed.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanStationEntry

telProdNpMonInterfWlanStationEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1
A base list of objects that are information about stations. The index is the number of the interface and the MAC address of the station
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanStationEntry

telProdNpMonInterfWlanStationIfIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.1
Interface number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanStationAddress		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.2
MAC Address of the Assigned STA.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

telProdNpMonInterfWlanStationState		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.3
Station state.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanStationSecurity		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.4
The Security Option of the Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), wep40(2), wep104(3), wpa-psk(4), wpa(5), wpa2(6), wpa2-psk(7)

telProdNpMonInterfWlanStationNode		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.5
The Node type of the Station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	unknown(1), access-point(2), client(3)

telProdNpMonInterfWlanStationMSDUTx		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.6
This attribute counts the total number of packets transmitted to this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanStationMSDURx		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.7
This attribute counts the total number of packets received from this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanStationBytesTx		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.8
This attribute counts the total number of octets transmitted to this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanStationBytesRx		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.9
This attribute counts the total number of octets received from this station.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanStationRate		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.10
This attribute reflects the data rate of the latest packet received from this station, in 500 kbps units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	WlanRate

telProdNpMonInterfWlanStationSignal		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.11
This attribute shows the received signal strength in dBm.
Status: mandatory	Access: read-only
OBJECT-TYPE
	WlanRSSI

telProdNpMonInterfWlanStationNoise		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.12
This attribute shows the measured noise level in dBm, or 0 if no connection can be established.
Status: mandatory	Access: read-only
OBJECT-TYPE
	WlanRSSI

telProdNpMonInterfWlanStationConnectTime		1.3.6.1.4.1.2007.4.1.2.2.2.24.3.1.13
This attribute records the system uptime at the moment the client successfully finished association.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter32

telProdNpMonInterfWlanACLTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.4
The WLAN Access List based on MAC Addresses
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanACLEntry

telProdNpMonInterfWlanACLEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1
The WLAN Access List based on MAC Addresses entry. Index: telProdNpMonInterfWlanACLIfIndex telProdNpMonInterfWlanACLAddress.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanACLEntry

telProdNpMonInterfWlanACLIfIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.1
The Interface the MAC Address belongs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanACLAddress		1.3.6.1.4.1.2007.4.1.2.2.2.24.4.1.2
The MAC Address for the accepted client
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

telProdNpMonInterfWlanScanResultsTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.5
This table contains the list of BSS entries found by foreground or background scanning in client mode.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanScanResultsEntry

telProdNpMonInterfWlanScanResultsEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1
A entry of the table. Index: telProdNpMonInterfWlanScanResultsIfIndex, telProdNpMonInterfWlanScanResultsIndex
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanScanResultsEntry

telProdNpMonInterfWlanScanResultsIfIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.1
ifIndex of the WLAN Interface the scan results belong to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanScanResultsIndex		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.2
Auxiliary index for different BSS entries.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanScanResultsBSSID		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.3
BSSID of this BSS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	MacAddress

telProdNpMonInterfWlanScanResultsSSID		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.4
SSID aka network name of this BSS. If broadcasting of SSID is disabled on this BSS, this string may be empty.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

telProdNpMonInterfWlanScanResultsChannel		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.5
The channel this BSS was received on.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..256

telProdNpMonInterfWlanScanResultsSignal		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.6
Receive signal strength of this BSS.
Status: mandatory	Access: read-only
OBJECT-TYPE
	WlanRSSI

telProdNpMonInterfWlanScanResultsNoise		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.7
This attribute shows the measured noise level in dBm, or 0 when this value is not available. It's the value measured during the last reception of data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	WlanRSSI

telProdNpMonInterfWlanScanResultsBeaconPeriod		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.8
This attribute contains the number of TU that this BSS uses for scheduling Beacon transmissions.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..65535

telProdNpMonInterfWlanScanResultsRates		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.9
This attribute contains one octet for each supported rate in this BSS, in Mbps units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

telProdNpMonInterfWlanScanResultsBasicRates		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.10
This attribute contains one octet for each required basic rate in this BSS, in Mbps units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

telProdNpMonInterfWlanScanResultsExtendedRates		1.3.6.1.4.1.2007.4.1.2.2.2.24.5.1.11
This attribute contains one octet for each supported extended rate in this BSS, in Mbps units.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString

telProdNpMonInterfWlanWMMTable		1.3.6.1.4.1.2007.4.1.2.2.2.24.6
Describes a WLAN WMM Access category settings
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		TelProdNpMonInterfWlanWMMEntry

telProdNpMonInterfWlanWMMEntry		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1
A entry of the table. Index: telProdNpMonInterfWlanWMMAccCat, telProdNpMonInterfWlanWMMwlanIf, telProdNpMonInterfWlanWMMType
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	TelProdNpMonInterfWlanWMMEntry

telProdNpMonInterfWlanWMMwlanIf		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.1
Radio index the AC belongs to.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanWMMAccCat		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.2
Access category type, each category is mandatory for a wlanIf. An access category (AC) is a label for the common set of enhanced distributed channel access (EDCA) parameters that are used by a quality of service (QoS) station (QSTA) to contend for the channel in order to transmit medium access control (MAC) service data units (MSDUs) with certain priorities. (More info in '802.11E / 3.123 access category (AC)'). besteffort(1): standard/default priority background(2): low priority video(3): medium priority (higher than 'besteffort') voice(4): high priority
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	besteffort(1), background(2), video(3), voice(4)

telProdNpMonInterfWlanWMMType		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.3
Type to which this telProdNpMonInterfWlanWMMEntry corresponds. Type access-point means the own parameters for WMM are changed. The entries with type station will be provided to the connected stations via WMM-IE.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	access-point(1), station(2)

telProdNpMonInterfWlanWMMaCWmin		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.4
Minimum size of contention window. for AC-BK and AC-BE telProdNpMonInterfWlanWMMaCWmin = telProdNpMonInterfWlanIfCWmin, for AC-VI telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-1)/2, for AC-VO telProdNpMonInterfWlanWMMaCWmin = (telProdNpMonInterfWlanIfCWmin-3)/4.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanWMMaCWmax		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.5
Maximum size of contention window. for AC-BK telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmax, for AC-BE telProdNpMonInterfWlanWMMaCWmax = 4*telProdNpMonInterfWlanIfCWmin + 3, for AC-VI telProdNpMonInterfWlanWMMaCWmax = telProdNpMonInterfWlanIfCWmin, for AC-VO telProdNpMonInterfWlanWMMaCWmax = (telProdNpMonInterfWlanIfCWmin-1)/2.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

telProdNpMonInterfWlanWMMAifsn		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.6
Arbitration Inter-Frame Space Number (AIFSN) for this Access category.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..99

telProdNpMonInterfWlanWMMTxopLimit		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.7
802.11 mode Transmit Opportunity Limit. The TxopLimit value is given in units of 32 microseconds.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..9999

telProdNpMonInterfWlanWMMAckPolicy		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.8
Ack policy for this Access category (default value is 'ack(1)').
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ack(1), noAck(2)

telProdNpMonInterfWlanWMMACM		1.3.6.1.4.1.2007.4.1.2.2.2.24.6.1.9
ACM (admission control) policy for this Access category i (default value is 'disabled(2)').
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)