TELDAT-MON-INTERF-PPP-MIB

File: TELDAT-MON-INTERF-PPP-MIB.mib (144761 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
TELDAT-SW-STRUCTURE-MIB

Imported symbols

IpAddress Counter OBJECT-TYPE
DisplayString PhysAddress telProdNpMonInterfRouter

Defined Types

TelProdNpMonIfcPPPLCPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPLCPCtrlGloPPPIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlGloLowIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlGloOrdIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlGloLowDescr DisplayString
  telProdNpMonIfcPPPLCPCtrlGloCircId INTEGER
  telProdNpMonIfcPPPLCPCtrlGloVersion DisplayString
  telProdNpMonIfcPPPLCPCtrlGloState INTEGER

TelProdNpMonIfcPPPLCPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPLCPCtrlOptPPPIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlOptLowIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlOptOrdIndex INTEGER
  telProdNpMonIfcPPPLCPCtrlOptLowDescr DisplayString
  telProdNpMonIfcPPPLCPCtrlOptCircId INTEGER
  telProdNpMonIfcPPPLCPCtrlOptMRULoc INTEGER
  telProdNpMonIfcPPPLCPCtrlOptMRURem INTEGER
  telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskLoc OCTET STRING
  telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskRem OCTET STRING
  telProdNpMonIfcPPPLCPCtrlOptAuthLoc INTEGER
  telProdNpMonIfcPPPLCPCtrlOptAuthRem INTEGER
  telProdNpMonIfcPPPLCPCtrlOptMagNumLoc DisplayString
  telProdNpMonIfcPPPLCPCtrlOptMagNumRem DisplayString
  telProdNpMonIfcPPPLCPCtrlOptProtCmpLoc INTEGER
  telProdNpMonIfcPPPLCPCtrlOptProtCmpRem INTEGER
  telProdNpMonIfcPPPLCPCtrlOptAddCmpLoc INTEGER
  telProdNpMonIfcPPPLCPCtrlOptAddCmpRem INTEGER
  telProdNpMonIfcPPPLCPCtrlOptChecksumLoc INTEGER
  telProdNpMonIfcPPPLCPCtrlOptChecksumRem INTEGER

TelProdNpMonIfcPPPLCPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPLCPStPPPIndex INTEGER
  telProdNpMonIfcPPPLCPStLowIndex INTEGER
  telProdNpMonIfcPPPLCPStOrdIndex INTEGER
  telProdNpMonIfcPPPLCPStLowDescr DisplayString
  telProdNpMonIfcPPPLCPStCircId INTEGER
  telProdNpMonIfcPPPLCPStClear INTEGER
  telProdNpMonIfcPPPLCPStFramesRx Counter
  telProdNpMonIfcPPPLCPStFramesTx Counter
  telProdNpMonIfcPPPLCPStBytesRx Counter
  telProdNpMonIfcPPPLCPStBytesTx Counter
  telProdNpMonIfcPPPLCPStConfReqRx Counter
  telProdNpMonIfcPPPLCPStConfReqTx Counter
  telProdNpMonIfcPPPLCPStConfAckRx Counter
  telProdNpMonIfcPPPLCPStConfAckTx Counter
  telProdNpMonIfcPPPLCPStConfNakRx Counter
  telProdNpMonIfcPPPLCPStConfNakTx Counter
  telProdNpMonIfcPPPLCPStConfRejRx Counter
  telProdNpMonIfcPPPLCPStConfRejTx Counter
  telProdNpMonIfcPPPLCPStTermReqRx Counter
  telProdNpMonIfcPPPLCPStTermReqTx Counter
  telProdNpMonIfcPPPLCPStTermAckRx Counter
  telProdNpMonIfcPPPLCPStTermAckTx Counter
  telProdNpMonIfcPPPLCPStEchoReqRx Counter
  telProdNpMonIfcPPPLCPStEchoReqTx Counter
  telProdNpMonIfcPPPLCPStEchoRepRx Counter
  telProdNpMonIfcPPPLCPStEchoRepTx Counter

TelProdNpMonIfcPPPIPCPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPIPCPCtrlGloIndex INTEGER
  telProdNpMonIfcPPPIPCPCtrlGloState INTEGER

TelProdNpMonIfcPPPIPCPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPIPCPCtrlOptIndex INTEGER
  telProdNpMonIfcPPPIPCPCtrlOptIpAddrLoc IpAddress
  telProdNpMonIfcPPPIPCPCtrlOptIpAddrRem IpAddress
  telProdNpMonIfcPPPIPCPCtrlOptVJCmpLoc INTEGER
  telProdNpMonIfcPPPIPCPCtrlOptVJCmpRem INTEGER

TelProdNpMonIfcPPPIPCPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPIPCPStIndex INTEGER
  telProdNpMonIfcPPPIPCPStClear INTEGER
  telProdNpMonIfcPPPIPCPStConfReqRx Counter
  telProdNpMonIfcPPPIPCPStConfReqTx Counter
  telProdNpMonIfcPPPIPCPStConfAckRx Counter
  telProdNpMonIfcPPPIPCPStConfAckTx Counter
  telProdNpMonIfcPPPIPCPStConfNakRx Counter
  telProdNpMonIfcPPPIPCPStConfNakTx Counter
  telProdNpMonIfcPPPIPCPStConfRejRx Counter
  telProdNpMonIfcPPPIPCPStConfRejTx Counter
  telProdNpMonIfcPPPIPCPStTermReqRx Counter
  telProdNpMonIfcPPPIPCPStTermReqTx Counter
  telProdNpMonIfcPPPIPCPStTermAckRx Counter
  telProdNpMonIfcPPPIPCPStTermAckTx Counter

TelProdNpMonIfcPPPVJStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPVJStIndex INTEGER
  telProdNpMonIfcPPPVJStClear INTEGER
  telProdNpMonIfcPPPVJStOutPackets Counter
  telProdNpMonIfcPPPVJStOutComprPkts Counter
  telProdNpMonIfcPPPVJStSearches Counter
  telProdNpMonIfcPPPVJStNoConnState Counter
  telProdNpMonIfcPPPVJStInUncomPkts Counter
  telProdNpMonIfcPPPVJStInComprPkts Counter
  telProdNpMonIfcPPPVJStInUnkTypePkts Counter
  telProdNpMonIfcPPPVJStInPktsTossErr Counter

TelProdNpMonIfcPPPCrtpStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPCrtpStIndex INTEGER
  telProdNpMonIfcPPPCrtpStClear INTEGER
  telProdNpMonIfcPPPCrtpStOutPackets Counter
  telProdNpMonIfcPPPCrtpStOutComprPkts Counter
  telProdNpMonIfcPPPCrtpStSearches Counter
  telProdNpMonIfcPPPCrtpStNoConnState Counter
  telProdNpMonIfcPPPCrtpStInUncomPkts Counter
  telProdNpMonIfcPPPCrtpStInComprPkts Counter
  telProdNpMonIfcPPPCrtpStInUnkTypePkts Counter
  telProdNpMonIfcPPPCrtpStInContextStPkts Counter

TelProdNpMonIfcPPPCommClearEntry  
SEQUENCE    
  telProdNpMonIfcPPPCommClearIndex INTEGER
  telProdNpMonIfcPPPCommClear INTEGER

TelProdNpMonIfcPPPCommResetEntry  
SEQUENCE    
  telProdNpMonIfcPPPCommResetIndex INTEGER
  telProdNpMonIfcPPPCommReset INTEGER

TelProdNpMonIfcPPPCCPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPCCPCtrlGloIndex INTEGER
  telProdNpMonIfcPPPCCPCtrlGloCCP INTEGER
  telProdNpMonIfcPPPCCPCtrlGloState INTEGER

TelProdNpMonIfcPPPCCPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPCCPCtrlOptIndex INTEGER
  telProdNpMonIfcPPPCCPCtrlOptProtOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptProtIn INTEGER
  telProdNpMonIfcPPPCCPCtrlOptEventOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptEventIn INTEGER
  telProdNpMonIfcPPPCCPCtrlOptTypeOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptTypeIn INTEGER
  telProdNpMonIfcPPPCCPCtrlOptHistOut DisplayString
  telProdNpMonIfcPPPCCPCtrlOptHistIn DisplayString
  telProdNpMonIfcPPPCCPCtrlOptChkModOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptChkModIn INTEGER
  telProdNpMonIfcPPPCCPCtrlOptPrcModOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptPrcModIn INTEGER
  telProdNpMonIfcPPPCCPCtrlOptSessionOut DisplayString
  telProdNpMonIfcPPPCCPCtrlOptSessionIn DisplayString
  telProdNpMonIfcPPPCCPCtrlOptSeqNumOut INTEGER
  telProdNpMonIfcPPPCCPCtrlOptSeqNumIn INTEGER

TelProdNpMonIfcPPPCCPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPCCPStIndex INTEGER
  telProdNpMonIfcPPPCCPStClear INTEGER
  telProdNpMonIfcPPPCCPStConfReqRx Counter
  telProdNpMonIfcPPPCCPStConfReqTx Counter
  telProdNpMonIfcPPPCCPStConfAckRx Counter
  telProdNpMonIfcPPPCCPStConfAckTx Counter
  telProdNpMonIfcPPPCCPStConfNakRx Counter
  telProdNpMonIfcPPPCCPStConfNakTx Counter
  telProdNpMonIfcPPPCCPStConfRejRx Counter
  telProdNpMonIfcPPPCCPStConfRejTx Counter
  telProdNpMonIfcPPPCCPStTermReqRx Counter
  telProdNpMonIfcPPPCCPStTermReqTx Counter
  telProdNpMonIfcPPPCCPStTermAckRx Counter
  telProdNpMonIfcPPPCCPStTermAckTx Counter
  telProdNpMonIfcPPPCCPStProcFrsRx Counter
  telProdNpMonIfcPPPCCPStProcFrsTx Counter
  telProdNpMonIfcPPPCCPStProcBytRx Counter
  telProdNpMonIfcPPPCCPStProcBytTx Counter
  telProdNpMonIfcPPPCCPStFramesRx Counter
  telProdNpMonIfcPPPCCPStFramesTx Counter
  telProdNpMonIfcPPPCCPStBytesRx Counter
  telProdNpMonIfcPPPCCPStBytesTx Counter
  telProdNpMonIfcPPPCCPStUncompFrsRx Counter
  telProdNpMonIfcPPPCCPStUncompFrsTx Counter
  telProdNpMonIfcPPPCCPStErrorFrsRx Counter
  telProdNpMonIfcPPPCCPStErrorFrsTx Counter
  telProdNpMonIfcPPPCCPStResetReqRx Counter
  telProdNpMonIfcPPPCCPStResetReqTx Counter
  telProdNpMonIfcPPPCCPStResetAckRx Counter
  telProdNpMonIfcPPPCCPStResetAckTx Counter
  telProdNpMonIfcPPPCCPStSeqErrorsRx Counter
  telProdNpMonIfcPPPCCPStSeqErrorsTx Counter
  telProdNpMonIfcPPPCCPStLCBErrorsRx Counter
  telProdNpMonIfcPPPCCPStLCBErrorsTx Counter
  telProdNpMonIfcPPPCCPStHdrErrorsRx Counter
  telProdNpMonIfcPPPCCPStHdrErrorsTx Counter

TelProdNpMonIfcPPPMPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPMPCtrlGloIndex INTEGER
  telProdNpMonIfcPPPMPCtrlGloRemUserName DisplayString
  telProdNpMonIfcPPPMPCtrlGloBundleLinks INTEGER
  telProdNpMonIfcPPPMPCtrlGloFragments INTEGER
  telProdNpMonIfcPPPMPCtrlGloRTFragments INTEGER

TelProdNpMonIfcPPPMPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPMPCtrlOptIndex INTEGER
  telProdNpMonIfcPPPMPCtrlOptMRRULoc INTEGER
  telProdNpMonIfcPPPMPCtrlOptMRRURem INTEGER
  telProdNpMonIfcPPPMPCtrlOptSSNLoc INTEGER
  telProdNpMonIfcPPPMPCtrlOptSSNRem INTEGER
  telProdNpMonIfcPPPMPCtrlOptClassLoc INTEGER
  telProdNpMonIfcPPPMPCtrlOptClassRem INTEGER
  telProdNpMonIfcPPPMPCtrlOptAddressLoc DisplayString
  telProdNpMonIfcPPPMPCtrlOptAddressRem DisplayString
  telprodNpMonIfcPPPMPCtrlOptMHFNeg INTEGER

TelProdNpMonIfcPPPMPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPMPStIndex INTEGER
  telProdNpMonIfcPPPMPStClear INTEGER
  telProdNpMonIfcPPPMPStFramesTx Counter
  telProdNpMonIfcPPPMPStFramesRx Counter
  telProdNpMonIfcPPPMPStBytesTx Counter
  telProdNpMonIfcPPPMPStBytesRx Counter
  telProdNpMonIfcPPPMPStQueuedFrm Counter
  telProdNpMonIfcPPPMPStErrorFrm Counter
  telProdNpMonIfcPPPMPStSeqLoss Counter
  telProdNpMonIfcPPPMPStRTFramesTx Counter
  telProdNpMonIfcPPPMPStRTFramesRx Counter
  telProdNpMonIfcPPPMPStRTBytesTx Counter
  telProdNpMonIfcPPPMPStRTBytesRx Counter
  telProdNpMonIfcPPPMPStRTQueuedFrm Counter
  telProdNpMonIfcPPPMPStRTErrorFrm Counter
  telProdNpMonIfcPPPMPStRTSeqLoss Counter

TelProdNpMonIfcPPPDialEntry  
SEQUENCE    
  telProdNpMonIfcPPPDialIfcIndex INTEGER
  telProdNpMonIfcPPPDialOrderIndex INTEGER
  telProdNpMonIfcPPPDialName DisplayString
  telProdNpMonIfcPPPDialDesAddr DisplayString
  telProdNpMonIfcPPPDialLocAddr DisplayString
  telProdNpMonIfcPPPDialLowIfc INTEGER
  telProdNpMonIfcPPPDialCircReq INTEGER
  telProdNpMonIfcPPPDialCircStatus INTEGER
  telProdNpMonIfcPPPDialCircAsig INTEGER

TelProdNpMonIfcPPPNCPIPCPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPIPCPCtrlGloIndex INTEGER
  telProdNpMonIfcPPPNCPIPCPCtrlGloState INTEGER

TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPIPCPCtrlOptIndex INTEGER
  telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrLoc IpAddress
  telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrRem IpAddress
  telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpLoc INTEGER
  telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpRem INTEGER

TelProdNpMonIfcPPPNCPIPCPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPIPCPStIndex INTEGER
  telProdNpMonIfcPPPNCPIPCPStClear INTEGER
  telProdNpMonIfcPPPNCPIPCPStConfReqRx Counter
  telProdNpMonIfcPPPNCPIPCPStConfReqTx Counter
  telProdNpMonIfcPPPNCPIPCPStConfAckRx Counter
  telProdNpMonIfcPPPNCPIPCPStConfAckTx Counter
  telProdNpMonIfcPPPNCPIPCPStConfNakRx Counter
  telProdNpMonIfcPPPNCPIPCPStConfNakTx Counter
  telProdNpMonIfcPPPNCPIPCPStConfRejRx Counter
  telProdNpMonIfcPPPNCPIPCPStConfRejTx Counter
  telProdNpMonIfcPPPNCPIPCPStTermReqRx Counter
  telProdNpMonIfcPPPNCPIPCPStTermReqTx Counter
  telProdNpMonIfcPPPNCPIPCPStTermAckRx Counter
  telProdNpMonIfcPPPNCPIPCPStTermAckTx Counter

TelProdNpMonIfcPPPNCPBCPControlGloEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPBCPCtrlGloIndex INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlGloState INTEGER

TelProdNpMonIfcPPPNCPBCPControlOptionsEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPBCPCtrlOptIndex INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptLineIdLoc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptLineIdRem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Loc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Rem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Loc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Rem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiLoc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiRem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptTinyLoc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptTinyRem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DLoc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DRem INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbLoc INTEGER
  telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbRem INTEGER

TelProdNpMonIfcPPPNCPBCPStatsEntry  
SEQUENCE    
  telProdNpMonIfcPPPNCPBCPStIndex INTEGER
  telProdNpMonIfcPPPNCPBCPStClear INTEGER
  telProdNpMonIfcPPPNCPBCPStConfReqRx Counter
  telProdNpMonIfcPPPNCPBCPStConfReqTx Counter
  telProdNpMonIfcPPPNCPBCPStConfAckRx Counter
  telProdNpMonIfcPPPNCPBCPStConfAckTx Counter
  telProdNpMonIfcPPPNCPBCPStConfNakRx Counter
  telProdNpMonIfcPPPNCPBCPStConfNakTx Counter
  telProdNpMonIfcPPPNCPBCPStConfRejRx Counter
  telProdNpMonIfcPPPNCPBCPStConfRejTx Counter
  telProdNpMonIfcPPPNCPBCPStTermReqRx Counter
  telProdNpMonIfcPPPNCPBCPStTermReqTx Counter
  telProdNpMonIfcPPPNCPBCPStTermAckRx Counter
  telProdNpMonIfcPPPNCPBCPStTermAckTx Counter

Defined Values

telProdNpMonInterfPPP 1.3.6.1.4.1.2007.4.1.2.2.2.10
OBJECT IDENTIFIER    

telProdNpMonIfcPPPLCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.1
OBJECT IDENTIFIER    

telProdNpMonIfcPPPLCPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1
This table contains global LCP parameters. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPLCPControlGloEntry

telProdNpMonIfcPPPLCPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1
Each entry contains the PPP interface number of the node, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, the version number and the current state of the LCP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPLCPControlGloEntry  

telProdNpMonIfcPPPLCPCtrlGloPPPIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.1
PPP interface number of the node (first index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlGloLowIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.2
Lower interface number of the node (second index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlGloOrdIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.3
Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlGloLowDescr 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.4
A description of the lower interface corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPCtrlGloCircId 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.5
Circuit identifier inside the lower interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlGloVersion 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.6
Version number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPCtrlGloState 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.1.1.7
Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9)  

telProdNpMonIfcPPPLCPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2
This table contains variables that give information about the transmitted and received options during the link setup. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPLCPControlOptionsEntry

telProdNpMonIfcPPPLCPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1
Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, the local and remote MRU, the local and remote Asynchronous Control Character Map, the authentication type (if it exists) in the local and remote site, the local and remote Magic Number, if Protocol Field Compression has been used in the local or remote end, if Address/Control Field Compression has been used in the local or remote end, and if 32 bits Checksum has been used in the local or remote end.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPLCPControlOptionsEntry  

telProdNpMonIfcPPPLCPCtrlOptPPPIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.1
PPP interface number of the node (first index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptLowIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.2
Lower interface number of the node (second index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptOrdIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.3
Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptLowDescr 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.4
A description of the lower interface corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPCtrlOptCircId 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.5
Circuit identifier inside the lower interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptMRULoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.6
MRU (Maximum Received Unit) in the local end. It represents the PPP frame maximum size that is accepted in reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptMRURem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.7
MRU (Maximum Received Unit) in the remote end. It represents the PPP frame maximum size that is accepted in reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.8
Local Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous PPP. If characters are inside the frame, they won't cause the activation of flow control process in modems or adapters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

telProdNpMonIfcPPPLCPCtrlOptAsyCharMaskRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.9
Remote Asynchronous Control Character Map. It shows the mask to use if transparent transmission is applied over control characters (XON, XOFF) for asynchronous PPP. If characters are inside the frame, they won't cause the activation of flow control process in modems or adapters.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(4)  

telProdNpMonIfcPPPLCPCtrlOptAuthLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.10
Local authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), pap(1), chap(2), other(3)  

telProdNpMonIfcPPPLCPCtrlOptAuthRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.11
Remote authentication type used. Possible options are: PAP (1), CHAP (2), a different one (3) or no authentication used (0).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER none(0), pap(1), chap(2), other(3)  

telProdNpMonIfcPPPLCPCtrlOptMagNumLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.12
Local magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and the times the clock has reset. The magic number has 4 bytes. This variable is a string that shows an hexadecimal value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPCtrlOptMagNumRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.13
Remote magic number. It is useful to determine if there is a loop in the link by transmitting a random number between the ends based on the system clock and the times the clock has reset. The magic number has 4 bytes. This variable is a string that shows an hexadecimal value.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPCtrlOptProtCmpLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.14
This variable indicates if Protocol Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the PPP frame protocol field is compressed and a byte is transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPLCPCtrlOptProtCmpRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.15
This variable indicates if Protocol Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the PPP frame protocol field is compressed and a byte is transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-negotiated(0), yes(1), no(2)  

telProdNpMonIfcPPPLCPCtrlOptAddCmpLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.16
This variable indicates if Address/Control Field Compression is used at the local end. Possible values are: (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the control and address fields of the PPP frame are not transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPLCPCtrlOptAddCmpRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.17
This variable indicates if Address/Control Field Compression is used at the remote end. Possible values are: (0) non negotiated, (1) yes or (2) no. Once LCP has been negotiated and NCP has been established, the control and address fields of the PPP frame are not transmitted.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-negotiated(0), yes(1), no(2)  

telProdNpMonIfcPPPLCPCtrlOptChecksumLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.18
This variable indicates if 32 bits Checksum is used at the local end. Possible values are: (1) yes or (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPLCPCtrlOptChecksumRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.2.1.19
This variable indicates if 32 bits Checksum is used at the remote end. Possible values are: (1) yes or (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPLCPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3
This table contains statistics of the LCP protocol. The entry number is determined by the PPP interface number, the lower interface number and the order number of the link inside the lower interface.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPLCPStatsEntry

telProdNpMonIfcPPPLCPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1
Each entry contains the PPP interface number, the lower interface number, the order number of the link inside the lower interface, a description of the lower interface, the circuit identifier, a variable to check variables deletion (corresponding counters reset), and variables that give information about the following counters values: sent and received frames number, sent and received bytes number, number of sent and received Configure Request LCP frames, number of sent and received Configure Ack LCP frames, number of sent and received Configure Nak LCP frames, number of sent and received Configure Reject LCP frames, number of sent and received Terminate Request LCP frames, number of sent and received Terminate Ack LCP frames, number of sent and received Echo Request LCP frames, number of sent and received Echo Reply LCP frames.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPLCPStatsEntry  

telProdNpMonIfcPPPLCPStPPPIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.1
PPP interface number of the node (first index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPStLowIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.2
Lower interface number of the node (second index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPStOrdIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.3
Order number of the link inside the lower interface corresponding to the LCP parameters of the entry (third index of the entry).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPStLowDescr 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.4
A description of the lower interface corresponding to this entry.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPLCPStCircId 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.5
Circuit identifier inside the lower interface.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPLCPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.6
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPLCPStFramesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.7
Number of frames received through the link shown in the indexes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStFramesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.8
Number of frames sent through the link shown in the indexes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStBytesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.9
Number of bytes received through the link shown in the indexes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStBytesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.10
Number of bytes sent through the link shown in the indexes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.11
Number of Configure Request LCP frames received through the link shown in the indexes. These frames are transmitted when a link is started and contains link configuration options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.12
Number of Configure Request LCP frames sent through the link shown in the indexes. These frames are transmitted when a link is started and contains link configuration options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.13
Number of Configure Ack LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with the received configuration options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.14
Number of Configure Ack LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and shows accordance with the received configuration options.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfNakRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.15
Number of Configure Nak LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not been accepted, nevertheless a remote reccomended or accepted value is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfNakTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.16
Number of Configure Nak LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not been accepted, nevertheless a remote reccomended or accepted value is sent.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfRejRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.17
Number of Configure Reject LCP frames received through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not neither accepted nor recognized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStConfRejTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.18
Number of Configure Reject LCP frames transmitted through the link shown in the indexes. These frames are answers to Configure Requests and indicates that some configuration options received in the identified frame has not neither accepted nor recognized.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStTermReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.19
Number of Terminate Request LCP frames received through the link shown in the indexes. These frames are transmitted to finish, close, the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStTermReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.20
Number of Terminate Request LCP frames transmitted through the link shown in the indexes. These frames are transmitted to finish, close, the link.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStTermAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.21
Number of Terminate Ack LCP frames received through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The reception of a non expected Terminate Ack packet indicates that the link has been closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStTermAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.22
Number of Terminate Ack LCP frames transmitted through the link shown in the indexes. These frames are transmitted after a Terminate Request is received. The reception of a non expected Terminate Ack packet indicates that the link has been closed.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStEchoReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.23
Number of Echo Request LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStEchoReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.24
Number of Echo Request LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStEchoRepRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.25
Number of Echo Reply LCP frames received through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPLCPStEchoRepTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.1.3.1.26
Number of Echo Reply LCP frames transmitted through the link shown in the indexes. These frames are used in link maintenance. From time to time a query containing Echo Request code is generated, and is sent back with an Echo Reply.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.2
OBJECT IDENTIFIER    

telProdNpMonIfcPPPIPCPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1
This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index).
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPIPCPControlGloEntry

telProdNpMonIfcPPPIPCPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1
Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPIPCPControlGloEntry  

telProdNpMonIfcPPPIPCPCtrlGloIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPIPCPCtrlGloState 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.1.1.2
Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9)  

telProdNpMonIfcPPPIPCPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2
This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index).
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPIPCPControlOptionsEntry

telProdNpMonIfcPPPIPCPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1
Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if received) and if the Van Jacobson compression option has been selected at any end (local or remote).
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPIPCPControlOptionsEntry  

telProdNpMonIfcPPPIPCPCtrlOptIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPIPCPCtrlOptIpAddrLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.2
The IP address assigned (supposing dinamic assignation has been selected).
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonIfcPPPIPCPCtrlOptIpAddrRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.3
The remote IP address (supposing it has been received).
Status: obsolete Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonIfcPPPIPCPCtrlOptVJCmpLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.4
Van Jacobson compression selected or not in the local end: (1) yes, (2) no.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPIPCPCtrlOptVJCmpRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.2.1.5
Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no.
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER non-negotiated(0), yes(1), no(2)  

telProdNpMonIfcPPPIPCPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3
This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index).
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPIPCPStatsEntry

telProdNpMonIfcPPPIPCPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames.
Status: obsolete Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPIPCPStatsEntry  

telProdNpMonIfcPPPIPCPStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: obsolete Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPIPCPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPIPCPStConfReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.3
Number of Configure Request NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.4
Number of Configure Request NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.5
Number of Configure Ack NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.6
Number of Configure Ack NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfNakRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.7
Number of Configure Nak NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfNakTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.8
Number of Configure Nak NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfRejRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.9
Number of Configure Reject NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStConfRejTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.10
Number of Configure Reject NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStTermReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.11
Number of Terminate Request NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStTermReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.12
Number of Terminate Request NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStTermAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.13
Number of Terminate Ack NCP frames received through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPIPCPStTermAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.2.3.1.14
Number of Terminate Ack NCP frames transmitted through the interface number shown in the index.
Status: obsolete Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.3
This table contains monitoring parameters related to Van Jacobson compression. The entry number is determined by the interface number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPVJStatsEntry

telProdNpMonIfcPPPVJStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of outbound TCP/IP packets, number of outbound compressed TCP/IP packets, number of searchs of the connection state, number of times the connection state wasn't found, number of inbound TCP/IP packets, number of inbound compressed TCP/IP packets, number of inbound TCP/IP packets classified as unknown and number of tossed error inbound TCP/IP packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPVJStatsEntry  

telProdNpMonIfcPPPVJStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPVJStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.2
This variable when is readed shows the output from the last counter restart attemp: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPVJStOutPackets 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.3
Number of outbound TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStOutComprPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.4
Number of outbound compressed TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStSearches 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.5
Number of searchs of the connection state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStNoConnState 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.6
Times the connection state could not be found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStInUncomPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.7
Number of inbound uncompressed TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStInComprPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.8
Number of inbound compressed TCP/IP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStInUnkTypePkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.9
Number of inbound TCP/IP packets classified as unkown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPVJStInPktsTossErr 1.3.6.1.4.1.2007.4.1.2.2.2.10.3.1.10
Number of inbound TCP/IP packets tossed error.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.4
This table contains monitoring parameters related to CRTP compression. The entry number is determined by the interface number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCrtpStatsEntry

telProdNpMonIfcPPPCrtpStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of outbound RTP packets, number of outbound compressed RTP packets, number of searchs of the connection state, number of times the connection state wasn't found, number of inbound RTP packets, number of inbound compressed RTP packets, number of inbound RTP packets classified as unknown and number of inbound RTP Context State packets.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCrtpStatsEntry  

telProdNpMonIfcPPPCrtpStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCrtpStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPCrtpStOutPackets 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.3
Number of outbound RTP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStOutComprPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.4
Number of outbound compressed RTP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStSearches 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.5
Number of searchs of the connection state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStNoConnState 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.6
Times the connection state could not be found.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStInUncomPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.7
Number of inbound uncompressed RTP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStInComprPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.8
Number of inbound compressed RTP packets.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStInUnkTypePkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.9
Number of inbound RTP packets classified as unkown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCrtpStInContextStPkts 1.3.6.1.4.1.2007.4.1.2.2.2.10.4.1.10
Number of inbound RTP Context State packets
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCommandGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.5
OBJECT IDENTIFIER    

telProdNpMonIfcPPPCommClearTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1
Table of CLEAR commands for different interfaces. The entry number is determined by the interface number and indicates the interface type to which this command is applied.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCommClearEntry

telProdNpMonIfcPPPCommClearEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1
Each entry contains the interface number, that is the table index, and indicates the interface the CLEAR command is applied on, a variable to perform the CLEAR operation: restart interface statistics, that when is readed indicates the output of the last CLEAR operation.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCommClearEntry  

telProdNpMonIfcPPPCommClearIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCommClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.1.1.2
This variable when is readed shows the output from the last attempt to restart interface statistics. Possible values are: 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the table yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes statistics to restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPCommResetTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2
Table of RESET-LINK commands for different type of interfaces. The entry number is determined by the interface number, and indicates which interface we are considering.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCommResetEntry

telProdNpMonIfcPPPCommResetEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1
Each entry contains the node interface number, that is the table index, and indicates the interface the RESET-LINK command is applied on, and a variable to perform the RESET-LINK operation: pull down the PPP link and when the variable is readed indicates the output of the last operation attempt.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCommResetEntry  

telProdNpMonIfcPPPCommResetIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCommReset 1.3.6.1.4.1.2007.4.1.2.2.2.10.5.2.1.2
This variable when is readed shows the output from the last attempt to drop PPP link. Possible values are: 2 (ok) if the operation was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to drop the link yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) implies the PPP link is going to be dropped.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPCCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.6
OBJECT IDENTIFIER    

telProdNpMonIfcPPPCCPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1
This table contains CCP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCCPControlGloEntry

telProdNpMonIfcPPPCCPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1
Each entry contains the node interface number which is the table index, and variables that shows if the CCP protocol is enabled or disabled, and the current state of the CCP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCCPControlGloEntry  

telProdNpMonIfcPPPCCPCtrlGloIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCCPCtrlGloCCP 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.2
This variable indicates if the CCP protocol is enabled or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telProdNpMonIfcPPPCCPCtrlGloState 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.1.1.3
Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9)  

telProdNpMonIfcPPPCCPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2
This table contains the variables that informs about the CCP protocol options. The entry number is determined by the interface value (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCCPControlOptionsEntry

telProdNpMonIfcPPPCCPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1
Each entry contains the node interface number, which is the table index, the output and input encapsulated protocol, the output and input event, the type of configuration format associated to the output and input, the number of output and input negotiated histories, the output and input negotiated check mode, the output and input negotiated process mode, the output and input session and the output and input sequence number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCCPControlOptionsEntry  

telProdNpMonIfcPPPCCPCtrlOptIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCCPCtrlOptProtOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.2
Output encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), mppp(2), other(3)  

telProdNpMonIfcPPPCCPCtrlOptProtIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.3
Input encapsulated protocol. It can be used PPP (1), MPPP (2) or other different of thesesones (3).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER ppp(1), mppp(2), other(3)  

telProdNpMonIfcPPPCCPCtrlOptEventOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.4
Output event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER encode(1), decode(2), all(3)  

telProdNpMonIfcPPPCCPCtrlOptEventIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.5
Input event.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER encode(1), decode(2), all(3)  

telProdNpMonIfcPPPCCPCtrlOptTypeOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.6
Type of configuration format associated to the output.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lzs-dcp(1), no-comp(2), stac(3), msppc(4), predic(5), bsdlzw(6), other(7)  

telProdNpMonIfcPPPCCPCtrlOptTypeIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.7
Type of configuration format associated to the input.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER lzs-dcp(1), no-comp(2), stac(3), msppc(4), predic(5), bsdlzw(6), other(7)  

telProdNpMonIfcPPPCCPCtrlOptHistOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.8
The number of output negotiated histories. This variable indicates pack to pack or the corresponding number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPCCPCtrlOptHistIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.9
The number of input negotiated histories. This variable indicates pack to pack or the corresponding number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPCCPCtrlOptChkModOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.10
Output negotiated check mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(0), none(1), lcb(2), crc(3), seqnum(4), seqnum-and-lcb(5), extended(6), other(7)  

telProdNpMonIfcPPPCCPCtrlOptChkModIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.11
Input negotiated check mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(0), none(1), lcb(2), crc(3), seqnum(4), seqnum-and-lcb(5), extended(6), other(7)  

telProdNpMonIfcPPPCCPCtrlOptPrcModOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.12
Output negotiated process mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(0), none(1), procuncomp(2), other(3)  

telProdNpMonIfcPPPCCPCtrlOptPrcModIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.13
Input negotiated process mode.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER unused(0), none(1), procuncomp(2), other(3)  

telProdNpMonIfcPPPCCPCtrlOptSessionOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.14
Output session identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPCCPCtrlOptSessionIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.15
Input session identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPCCPCtrlOptSeqNumOut 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.16
Output sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCCPCtrlOptSeqNumIn 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.2.1.17
Input sequence number.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCCPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3
This table contains statistics of the CCP protocol. The entry number is determined by the interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPCCPStatsEntry

telProdNpMonIfcPPPCCPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request CCP frames, number of sent and received Configure Ack CCP frames, number of sent and received Configure Nak CCP frames, number of sent and received Configure Reject CCP frames, number of sent and received Terminate Request CCP frames, number of sent and received Terminate Ack CCP frames, number of sent and received Terminate Ack CCP frames, number of processed frames received for uncompress and compress, number of processed bytes received for uncompress and compress, number of uncompressed and compressed frames, number of uncompressed and compressed bytes, number of non processed frames received for uncompress and compress, number of frames with errors in compression and uncompression, number of received and sent Reset Request CCP frames, number of received and sent Reset Ack CCP frames, number of sequence errors in reception and transmission, number of LCB errors in reception and transmission and number of received and sent header errors.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPCCPStatsEntry  

telProdNpMonIfcPPPCCPStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPCCPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPCCPStConfReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.3
Number of received Configure Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.4
Number of sent Configure Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.5
Number of received Configure Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.6
Number of sent Configure Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfNakRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.7
Number of received Configure Nak CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfNakTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.8
Number of sent Configure Nak CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfRejRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.9
Number of received Configure Reject CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStConfRejTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.10
Number of sent Configure Reject CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStTermReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.11
Number of received Terminate Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStTermReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.12
Number of sent Terminate Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStTermAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.13
Number of received Terminate Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStTermAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.14
Number of sent Terminate Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStProcFrsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.15
Number of processed frames received for uncompress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStProcFrsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.16
Number of processed frames received for compress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStProcBytRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.17
Number of processed bytes received for uncompress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStProcBytTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.18
Number of processed bytes received for compress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStFramesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.19
Number of uncompressed frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStFramesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.20
Number of compressed frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStBytesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.21
Number of uncompressed bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStBytesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.22
Number of compressed bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStUncompFrsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.23
Number of non processed frames received for uncompress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStUncompFrsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.24
Number of non processed frames received for compress.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStErrorFrsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.25
Number of frames whith errors in compression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStErrorFrsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.26
Number of frames whith errors in uncompression.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStResetReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.27
Number of received Reset Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStResetReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.28
Number of sent Reset Request CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStResetAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.29
Number of received Reset Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStResetAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.30
Number of sent Reset Ack CCP frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStSeqErrorsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.31
Number of sequence errors in reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStSeqErrorsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.32
Number of sequence errors in transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStLCBErrorsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.33
Number of LCB errors in reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStLCBErrorsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.34
Number of LCB errors in transmission.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStHdrErrorsRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.35
Number of received header errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPCCPStHdrErrorsTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.6.3.1.36
Number of sent header errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.7
OBJECT IDENTIFIER    

telProdNpMonIfcPPPMPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1
This table contains Multilink PPP global parameters. This table has an entry for each PPP interface. The entry number is determined by the corresponding interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPMPControlGloEntry

telProdNpMonIfcPPPMPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1
Each entry contains the node interface number which is the table index, and variables that shows the remote user name, the number of active links in bundle and the current fragment queue length.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPMPControlGloEntry  

telProdNpMonIfcPPPMPCtrlGloIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPMPCtrlGloRemUserName 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.2
When the authentication is enabled, this variable indicates the remote user name. In other case, it contains a empty string.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..30)  


telProdNpMonIfcPPPMPCtrlGloFragments 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.4
This variable shows the current fragment queue length.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPMPCtrlGloRTFragments 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.1.1.5
This variable shows the current fragment queue length for real time traffic.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPMPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2
This table contains the variables that informs about the Multilink PPP options. The entry number is determined by the interface value (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPMPControlOptionsEntry

telProdNpMonIfcPPPMPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1
Each entry contains the node interface number, which is the table index, the local and remote maximum packet size accepted in reception, if short sequence number header format is enabled in the local and remote end, the local and remote associated class and the local and remote address.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPMPControlOptionsEntry  

telProdNpMonIfcPPPMPCtrlOptIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPMPCtrlOptMRRULoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.2
Maximum packet size accepted in reception associated to the local end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

telProdNpMonIfcPPPMPCtrlOptMRRURem 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.3
Maximum packet size accepted in reception associated to the remote end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

telProdNpMonIfcPPPMPCtrlOptSSNLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.4
This variable shows if the short sequence number header format in the local end is enabled or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPMPCtrlOptSSNRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.5
This variable shows if the short sequence number header format in the remote end is enabled or disabled.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-negotiated(0), yes(1), no(2)  

telProdNpMonIfcPPPMPCtrlOptClassLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.6
This variable shows the class associated to the local end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null-class(0), locally-assigned-address(1), ip-address(2), ethernet-mac-address(3), magic-number(4), public-switched-network-directory-number(5)  

telProdNpMonIfcPPPMPCtrlOptClassRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.7
This variable shows the class associated to the remote end.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER null-class(0), locally-assigned-address(1), ip-address(2), ethernet-mac-address(3), magic-number(4), public-switched-network-directory-number(5)  

telProdNpMonIfcPPPMPCtrlOptAddressLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.8
This variable indicates the address associated to the local end. It is a string that must be interpreted according to the local class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

telProdNpMonIfcPPPMPCtrlOptAddressRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.9
This variable indicates the address associated to the remote end. It is a string that must be interpreted according to the remote class.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..19)  

telprodNpMonIfcPPPMPCtrlOptMHFNeg 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.2.1.10
This variable shows if the multiclass multilink option has been negotiated.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER no(1), yes(2)  

telProdNpMonIfcPPPMPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3
This table contains statistics of the Multilink PPP. The entry number is determined by the interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPMPStatsEntry

telProdNpMonIfcPPPMPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received frames, number of sent and received bytes, number of queued frames, number of error frames and number of sequence loss in reception.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPMPStatsEntry  

telProdNpMonIfcPPPMPStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPMPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPMPStFramesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.3
Number of sent frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStFramesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.4
Number of received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStBytesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.5
Number of sent bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStBytesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.6
Number of received bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStQueuedFrm 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.7
Number of queued received frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStErrorFrm 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.8
Number of rejected frames due to errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStSeqLoss 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.9
Number of sequence loss in reception.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTFramesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.10
Number of sent real time frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTFramesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.11
Number of received real time frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTBytesTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.12
Number of sent real time bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTBytesRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.13
Number of received real time bytes.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTQueuedFrm 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.14
Number of queued received real time frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTErrorFrm 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.15
Number of rejected real time frames due to errors.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPMPStRTSeqLoss 1.3.6.1.4.1.2007.4.1.2.2.2.10.7.3.1.16
Number of sequence loss in reception of real time frames.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPDialTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.8
This table contains information about monitoring parameters associated to Dial part of PPP. The entry number is determined by the PPP interface value and the Dial order number.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPDialEntry

telProdNpMonIfcPPPDialEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1
Each entry contains the PPP interface number of the node, the Dial order number, the Dial profile name, the remote address, the local address, the number of the interface over the PPP is mounted, the requested circuit identifier, the Dial circuit state and the assigned circuit identifier.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPDialEntry  

telProdNpMonIfcPPPDialIfcIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.1
PPP interface number of the node (first table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPDialOrderIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.2
Dial order number inside the PPP interface (second table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPDialName 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.3
Dial profile name.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPDialDesAddr 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.4
If the interface that support the PPP interface is switched, this variable indicates the remote address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPDialLocAddr 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.5
If the interface that support the PPP interface is switched, this variable indicates the local address.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString  

telProdNpMonIfcPPPDialLowIfc 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.6
Number of the interface the PPP is mounted over. In this case, the interfaces are numbered from 0, the same as in console.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPDialCircReq 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.7
When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the requested circuit identifier. Its value must be 255 to indicate the choice of the circuit number is free.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPDialCircStatus 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.8
Dial circuit state.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER down(0), closed(1), opening(2), closing(3), open(4)  

telProdNpMonIfcPPPDialCircAsig 1.3.6.1.4.1.2007.4.1.2.2.2.10.8.1.9
When the interface that support the PPP interface is composed of different subinterfaces, this variable specifies the assigned circuit identifier. If the Dial circuit state is not OPEN(4), the requested circuit identifier is shown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.9
OBJECT IDENTIFIER    

telProdNpMonIfcPPPNCPIPCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1
OBJECT IDENTIFIER    

telProdNpMonIfcPPPNCPIPCPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1
This table contains IPCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPIPCPControlGloEntry

telProdNpMonIfcPPPNCPIPCPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1
Each entry contains the node interface number which is the table index, and a variable that shows the current state of the IPCP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPIPCPControlGloEntry  

telProdNpMonIfcPPPNCPIPCPCtrlGloIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPIPCPCtrlGloState 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.1.1.2
Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9)  

telProdNpMonIfcPPPNCPIPCPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2
This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry

telProdNpMonIfcPPPNCPIPCPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1
Each entry contains the node interface number, which is the table index, the assigned IP address (in case of dinamic asignation), remote end IP address (if received) and if the Van Jacobson compression option has been selected at any end (local or remote).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPIPCPControlOptionsEntry  

telProdNpMonIfcPPPNCPIPCPCtrlOptIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.2
The IP address assigned (supposing dinamic assignation has been selected).
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonIfcPPPNCPIPCPCtrlOptIpAddrRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.3
The remote IP address (supposing it has been received).
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.4
Van Jacobson compression selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPIPCPCtrlOptVJCmpRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.2.1.5
Van Jacobson compression selected or not in the remote end: (0) non negotiated, (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER non-negotiated(0), yes(1), no(2)  

telProdNpMonIfcPPPNCPIPCPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3
This table contains statistics of the IPCP protocol. The entry number is determined by the interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPIPCPStatsEntry

telProdNpMonIfcPPPNCPIPCPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPIPCPStatsEntry  

telProdNpMonIfcPPPNCPIPCPStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPIPCPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPNCPIPCPStConfReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.3
Number of Configure Request NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.4
Number of Configure Request NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.5
Number of Configure Ack NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.6
Number of Configure Ack NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfNakRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.7
Number of Configure Nak NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfNakTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.8
Number of Configure Nak NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfRejRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.9
Number of Configure Reject NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStConfRejTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.10
Number of Configure Reject NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStTermReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.11
Number of Terminate Request NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStTermReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.12
Number of Terminate Request NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStTermAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.13
Number of Terminate Ack NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPIPCPStTermAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.1.3.1.14
Number of Terminate Ack NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPGroup 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2
OBJECT IDENTIFIER    

telProdNpMonIfcPPPNCPBCPControlGloTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1
This table contains BCP global parameters. This table has an entry for each PPP interface of the node. The entry number is determined by the corresponding interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPBCPControlGloEntry

telProdNpMonIfcPPPNCPBCPControlGloEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1
Each entry contains the node interface number which is the table index, and a variable that shows the current state of the BCP protocol.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPBCPControlGloEntry  

telProdNpMonIfcPPPNCPBCPCtrlGloIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPBCPCtrlGloState 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.1.1.2
Current protocol state. The possible values of the variable are integer numbers between 0 and 9. Each number is related to a feasible state: (0) initial, (1) starting, (2) closed, (3) stopped, (4) closing, (5) stopping, (6) req-sent, (7) ack-rcvd, (8) ack-sent, (9) opened.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), req-sent(6), ack-rcvd(7), ack-sent(8), opened(9)  

telProdNpMonIfcPPPNCPBCPControlOptionsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2
This table contains information about parameters used to monitor received and transmitted options during the network level protocol setup. The entry number is determined by the interface value (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPBCPControlOptionsEntry

telProdNpMonIfcPPPNCPBCPControlOptionsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1
Each entry contains the node interface number, which is the table index, local tinygram support and remote tinygram support.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPBCPControlOptionsEntry  

telProdNpMonIfcPPPNCPBCPCtrlOptIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPBCPCtrlOptLineIdLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.2
Line Identification configured for SRB on the local end
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPBCPCtrlOptLineIdRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.3
Line Identification configured for SRB on the remote end
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Loc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.4
Reception of IEEE 802.3 frames allowed selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptMac8023Rem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.5
Reception of IEEE 802.3 frames allowed selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Loc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.6
Reception of IEEE 802.5 frames allowed selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptMac8025Rem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.7
Reception of IEEE 802.5 frames allowed selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.8
Reception of FDDI frames allowed selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptMacFddiRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.9
Reception of FDDI frames allowed selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptTinyLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.10
Tinygram compress support selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptTinyRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.11
Tinygram compress support selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.12
Reception of 802.1D STP frames allowed selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptStp8021DRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.13
Reception of 802.1D STP frames allowed selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbLoc 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.14
Reception of IBM SRB STP frames allowed selected or not in the local end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPCtrlOptStpIbmSrbRem 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.2.1.15
Reception of IBM SRB STP frames allowed selected or not in the remote end: (1) yes, (2) no.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

telProdNpMonIfcPPPNCPBCPStatsTable 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3
This table contains statistics of the BCP protocol. The entry number is determined by the interface number (table index).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdNpMonIfcPPPNCPBCPStatsEntry

telProdNpMonIfcPPPNCPBCPStatsEntry 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1
Each entry contains the node interface number, which is the table index, a variable to check variables deletion (corresponding counters reset), and information about the following counters values: number of sent and received Configure Request NCP frames, number of sent and received Configure Ack NCP frames, number of sent and received Configure Nak NCP frames, number of sent and received Configure Reject NCP frames, number of sent and received Terminate Request NCP frames, number of sent and received Terminate Ack NCP frames.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdNpMonIfcPPPNCPBCPStatsEntry  

telProdNpMonIfcPPPNCPBCPStIndex 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.1
Interface number of the node, that indicates the corresponding table entry (it is the table index).
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdNpMonIfcPPPNCPBCPStClear 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.2
This variable when is readed shows the output from the last counter restart attempt: the value is 2 (ok) if the restart was performed succesfully, 3 (error) if an error ocurred and 4 (undefined) if nobody has tried to restart the counters yet. In set operations, the value 1 (it is the only value that can be assigned by a writing operation) causes a counter restart.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdNpMonIfcPPPNCPBCPStConfReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.3
Number of Configure Request NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.4
Number of Configure Request NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.5
Number of Configure Ack NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.6
Number of Configure Ack NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfNakRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.7
Number of Configure Nak NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfNakTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.8
Number of Configure Nak NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfRejRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.9
Number of Configure Reject NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStConfRejTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.10
Number of Configure Reject NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStTermReqRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.11
Number of Terminate Request NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStTermReqTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.12
Number of Terminate Request NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStTermAckRx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.13
Number of Terminate Ack NCP frames received through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdNpMonIfcPPPNCPBCPStTermAckTx 1.3.6.1.4.1.2007.4.1.2.2.2.10.9.2.3.1.14
Number of Terminate Ack NCP frames transmitted through the interface number shown in the index.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor