TELDAT-MON-CentrixD-MIB

File: TELDAT-MON-CentrixD-MIB.mib (48152 bytes)

Imported modules

RFC1155-SMI RFC-1212 RFC1213-MIB
TELDAT-MIB

Imported symbols

Counter IpAddress OBJECT-TYPE
DisplayString telproducts

Defined Types

TelProdCentrixDConfDEPFilterEntry  
SEQUENCE    
  telProdCentrixDConfDEPFilterIndex INTEGER
  telProdCentrixDConfDEPFilterType INTEGER
  telProdCentrixDConfDEPFilterPattern INTEGER
  telProdCentrixDConfDEPFilterValue DisplayString
  telProdCentrixDConfDEPFilterDelete INTEGER

TelProdCentrixDMonDEPTransOkEntry  
SEQUENCE    
  telProdCentrixDMonDEPTransOkIndex INTEGER
  telProdCentrixDMonDEPTransOkStartTime OCTET STRING
  telProdCentrixDMonDEPTransOkEndTime OCTET STRING
  telProdCentrixDMonDEPTransOkDate OCTET STRING
  telProdCentrixDMonDEPTransOkId1 DisplayString
  telProdCentrixDMonDEPTransOkId2 DisplayString
  telProdCentrixDMonDEPTransOkId3 DisplayString
  telProdCentrixDMonDEPTransOkType DisplayString
  telProdCentrixDMonDEPTransOkIpAddr IpAddress
  telProdCentrixDMonDEPTransOkNri DisplayString
  telProdCentrixDMonDEPTransOkCause INTEGER
  telProdCentrixDMonDEPTransOkX25Cause INTEGER
  telProdCentrixDMonDEPTransOkDiagn INTEGER
  telProdCentrixDMonDEPTransOkState INTEGER

TelProdCentrixDMonDEPTraOkNewEntry  
SEQUENCE    
  telProdCentrixDMonDEPTraOkNewIndex INTEGER
  telProdCentrixDMonDEPTraOkNewStartTime OCTET STRING
  telProdCentrixDMonDEPTraOkNewEndTime OCTET STRING
  telProdCentrixDMonDEPTraOkNewDate OCTET STRING
  telProdCentrixDMonDEPTraOkNewId1 DisplayString
  telProdCentrixDMonDEPTraOkNewId2 DisplayString
  telProdCentrixDMonDEPTraOkNewId3 DisplayString
  telProdCentrixDMonDEPTraOkNewType DisplayString
  telProdCentrixDMonDEPTraOkNewIpAddr IpAddress
  telProdCentrixDMonDEPTraOkNewNri DisplayString
  telProdCentrixDMonDEPTraOkNewCause INTEGER
  telProdCentrixDMonDEPTraOkNewX25Cause INTEGER
  telProdCentrixDMonDEPTraOkNewDiagn INTEGER
  telProdCentrixDMonDEPTraOkNewState INTEGER

TelProdCentrixDMonDEPTransWroEntry  
SEQUENCE    
  telProdCentrixDMonDEPTransWroIndex INTEGER
  telProdCentrixDMonDEPTransWroStartTime OCTET STRING
  telProdCentrixDMonDEPTransWroEndTime OCTET STRING
  telProdCentrixDMonDEPTransWroDate OCTET STRING
  telProdCentrixDMonDEPTransWroId1 DisplayString
  telProdCentrixDMonDEPTransWroId2 DisplayString
  telProdCentrixDMonDEPTransWroId3 DisplayString
  telProdCentrixDMonDEPTransWroType DisplayString
  telProdCentrixDMonDEPTransWroIpAddr IpAddress
  telProdCentrixDMonDEPTransWroNri DisplayString
  telProdCentrixDMonDEPTransWroCause INTEGER
  telProdCentrixDMonDEPTransWroX25Cause INTEGER
  telProdCentrixDMonDEPTransWroDiagn INTEGER
  telProdCentrixDMonDEPTransWroState INTEGER

TelProdCentrixDMonDEPTraWroNewEntry  
SEQUENCE    
  telProdCentrixDMonDEPTraWroNewIndex INTEGER
  telProdCentrixDMonDEPTraWroNewStartTime OCTET STRING
  telProdCentrixDMonDEPTraWroNewEndTime OCTET STRING
  telProdCentrixDMonDEPTraWroNewDate OCTET STRING
  telProdCentrixDMonDEPTraWroNewId1 DisplayString
  telProdCentrixDMonDEPTraWroNewId2 DisplayString
  telProdCentrixDMonDEPTraWroNewId3 DisplayString
  telProdCentrixDMonDEPTraWroNewType DisplayString
  telProdCentrixDMonDEPTraWroNewIpAddr IpAddress
  telProdCentrixDMonDEPTraWroNewNri DisplayString
  telProdCentrixDMonDEPTraWroNewCause INTEGER
  telProdCentrixDMonDEPTraWroNewX25Cause INTEGER
  telProdCentrixDMonDEPTraWroNewDiagn INTEGER
  telProdCentrixDMonDEPTraWroNewState INTEGER

Defined Values

telProductsCentrixD 1.3.6.1.4.1.2007.4.71
OBJECT IDENTIFIER    

telProdCentrixDConfig 1.3.6.1.4.1.2007.4.71.1
OBJECT IDENTIFIER    

telProdCentrixDMonit 1.3.6.1.4.1.2007.4.71.2
OBJECT IDENTIFIER    

telProdCentrixDConfProtocol 1.3.6.1.4.1.2007.4.71.1.1
OBJECT IDENTIFIER    

telProdCentrixDConfDEP 1.3.6.1.4.1.2007.4.71.1.1.1
OBJECT IDENTIFIER    

telProdCentrixDConfDEPFilterGroup 1.3.6.1.4.1.2007.4.71.1.1.1.1
OBJECT IDENTIFIER    

telProdCentrixDConfDEPFilterEnable 1.3.6.1.4.1.2007.4.71.1.1.1.1.1
Variable to enable/disable the process of filtering in order to choose which complete and incomplete transactions are going to be stored in the corresponding table. Allowed values for this variable are: (1) enabled (2) disabled.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER enabled(1), disabled(2)  

telProdCentrixDConfDEPFilterTable 1.3.6.1.4.1.2007.4.71.1.1.1.1.2
The filter table contains one entry for each filter configured. These filters are used to choose which complete and incomplete transactions are going to be stored in the corresponding table (only if filtering process is enabled).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdCentrixDConfDEPFilterEntry

telProdCentrixDConfDEPFilterEntry 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1
Each entry of the filter table contains the configuration parameters corresponding to one of the filters to be applied to complete and incomplete transactions in order to choose which of them are going to be stored in the respective tables. Variables included in each entry are: an index to identify the concrete filter, the filter type (inclusive or exclusive), the pattern of comparison (i.e. the type or class of the value used to select which transactions are stored), the value in which comparison is based and a variable to delete the entry (the filter).
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdCentrixDConfDEPFilterEntry  

telProdCentrixDConfDEPFilterIndex 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.1
Index of the table: order of the entry inside the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDConfDEPFilterType 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.2
Filter type: (1) inclusive, (2) exclusive. Default value: 2 (exclusive).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER inclusive(1), exclusive(2)  

telProdCentrixDConfDEPFilterPattern 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.3
Pattern of comparison, i.e. the type or class of the value used to select which complete and incomplete transactions will be stored in the corresponding table. Allowed values for this variable are: (1) serial-number (2) hostname (3) nri. Default value: 2 (hostname).
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER serial-number(1), hostname(2), nri(3)  

telProdCentrixDConfDEPFilterValue 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.4
Value of comparison to decide if a transaction is or no stored. Depending of the value taken for the previous variable, this parameter is under the following restrictions: 1. Serial number must be a string corresponding to a valid serial number. 2. Hostname must be a string no longer than 79 characters. 3. NRI must be a string composed of one to 16 digits (a valid X.25 address). Default value is an empty string.
Status: mandatory Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDConfDEPFilterDelete 1.3.6.1.4.1.2007.4.71.1.1.1.1.2.1.5
If the value of this variable is set to 1, this entry will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER delete(1), ok(2), error(3), undefined(4)  

telProdCentrixDMonProtocol 1.3.6.1.4.1.2007.4.71.2.1
OBJECT IDENTIFIER    

telProdCentrixDMonDEP 1.3.6.1.4.1.2007.4.71.2.1.1
OBJECT IDENTIFIER    

telProdCentrixDMonDEPTransGroup 1.3.6.1.4.1.2007.4.71.2.1.1.1
OBJECT IDENTIFIER    

telProdCentrixDMonDEPTransClearGroup 1.3.6.1.4.1.2007.4.71.2.1.1.1.1
OBJECT IDENTIFIER    

telProdCentrixDMonDEPTransClearOk 1.3.6.1.4.1.2007.4.71.2.1.1.1.1.1
Command field to clear ALL correct transactions. If the value of this variable is set to 1, all correct transactions will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2), error(3), undefined(4)  

telProdCentrixDMonDEPTransClearWrong 1.3.6.1.4.1.2007.4.71.2.1.1.1.1.2
Command field to clear ALL wrong or incomplete transactions. If the value of this variable is set to 1, all wrong transactions will be deleted. In GET operations, the value taken by this variable indicates the result of the last operation: ok (2), if the entry was deleted succesfully; error (3), if the operation failed; the value undefined (4) indicates that delete operations have not been made yet.
Status: mandatory Access: read-write
OBJECT-TYPE    
  INTEGER clear(1), ok(2), error(3), undefined(4)  

telProdCentrixDMonDEPTransOkGroup 1.3.6.1.4.1.2007.4.71.2.1.1.1.2
OBJECT IDENTIFIER    

telProdCentrixDMonDEPTransOkNumber 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.1
Total number of completed transactions carried out since last restart, filtered or not filtered (stored in the corresponding table).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdCentrixDMonDEPTransOkNoFiltNumber 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.2
Total number of completed transactions carried out and stored in the corresponding table (not filtered) since last restart.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdCentrixDMonDEPTransOkTable 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3
Table with the latest transactions carried out that have been sucessfully completed. Each entry contains information about one single completed transaction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdCentrixDMonDEPTransOkEntry

telProdCentrixDMonDEPTransOkEntry 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1
Each entry contains information about one completed transaction and it is composed of the following fields: an index to identify the transaction in the table, start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that carried out the operation, X.25 address that the datafone calls, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdCentrixDMonDEPTransOkEntry  

telProdCentrixDMonDEPTransOkIndex 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.1
Index of the table: order of the entry inside the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransOkStartTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.2
This variable indicates the start time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransOkEndTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.3
This variable indicates the end time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransOkDate 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.4
This variable indicates the date the operation was carried out on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransOkId1 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.5
First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransOkId2 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.6
Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransOkId3 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.7
Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransOkType 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.8
Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1)  

telProdCentrixDMonDEPTransOkIpAddr 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.9
IP address of the remote peer that carried out the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdCentrixDMonDEPTransOkNri 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.10
X.25 address that the datafone calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

telProdCentrixDMonDEPTransOkCause 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.11
This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25-host-disc(1), eot(2), t4(3), unexpected-x25-data(4), x25-pos-disc(5), x25-disc(51), timeout-x25-establish(52), rcv-eot-from-pos(53), bad-s-msg(57), timeout-wait-msg-ends(58), timeout-wait-msg-start-E5(59), max-retrans-due-nak(60), max-retrans-due-timeout(61), max-bad-msg-rcv(62), msg-too-short(63), max-bad-data-rcv(64), timeout-wait-msg-start-E2(65), timeout-wait-ack(66), timeout-wait-host-answers(68), tcp-ses-released(70), na-not-found(80), timeout-opening-tcp-ses-to-host(81), tcp-ses-closed-by-host(82), max-tcp-host-ses-time-expired(83)  

telProdCentrixDMonDEPTransOkX25Cause 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.12
This variable indicates the reason why the X.25 connection was released.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransOkDiagn 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.13
This variable indicates the diagnosis of the X.25 call release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransOkState 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.3.1.14
This variable indicates the DEP fsm state when the transaction was stored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraOkNewTable 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4
This table has only one entry which contains information about the first of the latest transactions that have been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdCentrixDMonDEPTraOkNewEntry

telProdCentrixDMonDEPTraOkNewEntry 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1
This table has only one entry which contains information about the first of the latest transactions that have been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. It is composed of the following fields: an index to identify the transaction in the table (it always takes the value 1), start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that carried out the operation, X.25 address that the datafone calls, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdCentrixDMonDEPTraOkNewEntry  

telProdCentrixDMonDEPTraOkNewIndex 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.1
Index of the table: order of the entry inside the table. It can only takes the value 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraOkNewStartTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.2
This variable indicates the start time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraOkNewEndTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.3
This variable indicates the end time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraOkNewDate 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.4
This variable indicates the date the operation was carried out on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraOkNewId1 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.5
First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraOkNewId2 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.6
Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraOkNewId3 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.7
Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraOkNewType 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.8
Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1)  

telProdCentrixDMonDEPTraOkNewIpAddr 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.9
IP address of the remote peer that carried out the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdCentrixDMonDEPTraOkNewNri 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.10
X.25 address that the datafone calls.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

telProdCentrixDMonDEPTraOkNewCause 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.11
This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25-host-disc(1), eot(2), t4(3), unexpected-x25-data(4), x25-pos-disc(5), x25-disc(51), timeout-x25-establish(52), rcv-eot-from-pos(53), bad-s-msg(57), timeout-wait-msg-ends(58), timeout-wait-msg-start-E5(59), max-retrans-due-nak(60), max-retrans-due-timeout(61), max-bad-msg-rcv(62), msg-too-short(63), max-bad-data-rcv(64), timeout-wait-msg-start-E2(65), timeout-wait-ack(66), timeout-wait-host-answers(68), tcp-ses-released(70), na-not-found(80), timeout-opening-tcp-ses-to-host(81), tcp-ses-closed-by-host(82), max-tcp-host-ses-time-expired(83)  

telProdCentrixDMonDEPTraOkNewX25Cause 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.12
This variable indicates the reason why the X.25 connection was released.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraOkNewDiagn 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.13
This variable indicates the diagnosis of the X.25 call release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraOkNewState 1.3.6.1.4.1.2007.4.71.2.1.1.1.2.4.1.14
This variable indicates the DEP fsm state when the transaction was stored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransWroGroup 1.3.6.1.4.1.2007.4.71.2.1.1.1.3
OBJECT IDENTIFIER    

telProdCentrixDMonDEPTransWroNumber 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.1
Total number of transactions that have not been sucessfully completed since last restart, filtered or not filtered (stored in the corresponding table).
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdCentrixDMonDEPTransWroNoFiltNumber 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.2
Total number of transactions that have not been sucessfully completed and stored in the corresponding table (not filtered) since last restart.
Status: mandatory Access: read-only
OBJECT-TYPE    
  Counter  

telProdCentrixDMonDEPTransWroTable 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3
Table with the latest transactions that have not been sucessfully completed. Each entry contains information about one incomplete transaction.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdCentrixDMonDEPTransWroEntry

telProdCentrixDMonDEPTransWroEntry 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1
Each entry contains information about one incomplete transaction and it is composed of the following fields: an index to identify the transaction in the table, start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that tried to carry out the operation, X.25 address that the datafone called, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdCentrixDMonDEPTransWroEntry  

telProdCentrixDMonDEPTransWroIndex 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.1
Index of the table: order of the entry inside the table.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransWroStartTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.2
This variable indicates the start time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransWroEndTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.3
This variable indicates the end time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransWroDate 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.4
This variable indicates the date the operation was carried out on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTransWroId1 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.5
First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransWroId2 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.6
Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransWroId3 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.7
Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTransWroType 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.8
Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1)  

telProdCentrixDMonDEPTransWroIpAddr 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.9
IP address of the remote peer that carried out the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdCentrixDMonDEPTransWroNri 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.10
X.25 address that the datafone called.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

telProdCentrixDMonDEPTransWroCause 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.11
This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25-host-disc(1), eot(2), t4(3), unexpected-x25-data(4), x25-pos-disc(5), x25-disc(51), timeout-x25-establish(52), rcv-eot-from-pos(53), bad-s-msg(57), timeout-wait-msg-ends(58), timeout-wait-msg-start-E5(59), max-retrans-due-nak(60), max-retrans-due-timeout(61), max-bad-msg-rcv(62), msg-too-short(63), max-bad-data-rcv(64), timeout-wait-msg-start-E2(65), timeout-wait-ack(66), timeout-wait-host-answers(68), tcp-ses-released(70), na-not-found(80), timeout-opening-tcp-ses-to-host(81), tcp-ses-closed-by-host(82), max-tcp-host-ses-time-expired(83)  

telProdCentrixDMonDEPTransWroX25Cause 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.12
This variable indicates the reason why the X.25 connection was released.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransWroDiagn 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.13
This variable indicates the diagnosis of the X.25 call release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTransWroState 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.3.1.14
This variable indicates the DEP fsm state when the transaction was stored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraWroNewTable 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4
This table has only one entry which contains information about the first of the latest transactions that have not been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    TelProdCentrixDMonDEPTraWroNewEntry

telProdCentrixDMonDEPTraWroNewEntry 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1
This table has only one entry which contains information about the first of the latest transactions that have not been sucessfully completed, that have been stored in the corresponding table (have not been filtered) and that have not been sent to the manager station yet. It is composed of the following fields: an index to identify the transaction in the table (it always takes the value 1), start and end time and date of the operation, three variables for the three possible identifiers associated to the remote peer, type of transaction, IP address of the remote peer that tried to carry out the operation, X.25 address that the datafone called, the reason why the connection failed, the reason why the X.25 connection was released, the diagnosis of the X.25 call release and the DEP fsm state when the transaction was stored.
Status: mandatory Access: not-accessible
OBJECT-TYPE    
  TelProdCentrixDMonDEPTraWroNewEntry  

telProdCentrixDMonDEPTraWroNewIndex 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.1
Index of the table: order of the entry inside the table. It can only takes the value 1.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraWroNewStartTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.2
This variable indicates the start time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraWroNewEndTime 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.3
This variable indicates the end time of the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraWroNewDate 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.4
This variable indicates the date the operation was carried out on.
Status: mandatory Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(3)  

telProdCentrixDMonDEPTraWroNewId1 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.5
First identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a first identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraWroNewId2 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.6
Second identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a second identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraWroNewId3 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.7
Third identifier of the remote peer which initiates the operation. This variable will be an empty string if remote peer does not send a third identifier.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..79)  

telProdCentrixDMonDEPTraWroNewType 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.8
Type of transaction performed. Values: '0' authorization or purchase '1' repayment '2' repetition '3' enquiry '4' close '5' account-entity selection '6' operation details '8' account enquiry '9' movement enquiry 'M' memory inicialization/setup 'U' Unknown.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(1)  

telProdCentrixDMonDEPTraWroNewIpAddr 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.9
IP address of the remote peer that carried out the operation.
Status: mandatory Access: read-only
OBJECT-TYPE    
  IpAddress  

telProdCentrixDMonDEPTraWroNewNri 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.10
X.25 address that the datafone called.
Status: mandatory Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..15)  

telProdCentrixDMonDEPTraWroNewCause 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.11
This variable indicates the reason why the connection failed. Possible values are: (1) X.25 call released by the host (2) EOT received: POS Disconnection (3) T4 received: POS Disconnection (4) Unexpected X.25 data received (5) X.25 call released by POS: the host has received a L message which is not a response to a previous L message sent. (51) X.25 call released by the host (52) Timeout waiting X25 establish. (53) Release from POS: EOT received. (57) Bad message waiting S message. (58) Timeout waiting message ends from POS. (59) Timeout waiting message start from POS, E5. (60) Reach max number of retransmissions send to POS, due NAK. (61) Reach max number of retransmissions send to POS, due timeout. (62) Reach max number of bad messages received from POS. (63) Was received a message too short. (64) Reach max number of bad data received from POS, in E2. (65) Timeout waiting message start from POS, in E2. (66) Timeout waiting ACK from POS. (68) Timeout waiting a Host answers. (70) TCP session release from remote end (POS). (80) NA (X25) not found in Host regiters configuration. (81) Timeout opening TCP session to Host. (82) TCP session closed by Host. (83) Max. TCP Host session time expired.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER x25-host-disc(1), eot(2), t4(3), unexpected-x25-data(4), x25-pos-disc(5), x25-disc(51), timeout-x25-establish(52), rcv-eot-from-pos(53), bad-s-msg(57), timeout-wait-msg-ends(58), timeout-wait-msg-start-E5(59), max-retrans-due-nak(60), max-retrans-due-timeout(61), max-bad-msg-rcv(62), msg-too-short(63), max-bad-data-rcv(64), timeout-wait-msg-start-E2(65), timeout-wait-ack(66), timeout-wait-host-answers(68), tcp-ses-released(70), na-not-found(80), timeout-opening-tcp-ses-to-host(81), tcp-ses-closed-by-host(82), max-tcp-host-ses-time-expired(83)  

telProdCentrixDMonDEPTraWroNewX25Cause 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.12
This variable indicates the reason why the X.25 connection was released.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraWroNewDiagn 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.13
This variable indicates the diagnosis of the X.25 call release.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPTraWroNewState 1.3.6.1.4.1.2007.4.71.2.1.1.1.3.4.1.14
This variable indicates the DEP fsm state when the transaction was stored.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPSessionsGroup 1.3.6.1.4.1.2007.4.71.2.1.1.2
OBJECT IDENTIFIER    

telProdCentrixDMonDEPSessTcpGroup 1.3.6.1.4.1.2007.4.71.2.1.1.2.1
OBJECT IDENTIFIER    

telProdCentrixDMonDEPSessTcpTotal 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.1
Number of DEP sessions open.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPSessTcpIn 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.2
Number of TCP IN sessions open, this sessions are open by POS.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER  

telProdCentrixDMonDEPSessTcpOut 1.3.6.1.4.1.2007.4.71.2.1.1.2.1.3
Number of TCP OUT sessions open, this sessions are open from HOST.
Status: mandatory Access: read-only
OBJECT-TYPE    
  INTEGER