Summitd
File:
Summitd.mib (7969 bytes)
Imported modules
Imported symbols
Defined Values
uni-a |
1.3.6.1.4.1.23688.1.1 |
OBJECT IDENTIFIER |
|
|
|
name |
1.3.6.1.4.1.23688.1.1.1 |
Name of the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..16) |
|
condition |
1.3.6.1.4.1.23688.1.1.2 |
Condition of the unit (1-ok,2-Error,3-Warning). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ok(1), error(2), warning(3) |
|
mannum |
1.3.6.1.4.1.23688.1.1.3 |
Maufacturing number of the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
status |
1.3.6.1.4.1.23688.1.1.4 |
Status of the unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(1..16) |
|
ebno |
1.3.6.1.4.1.23688.1.1.6 |
Eb/No signal quality in 0.1 db (72 -> 7.2db). |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
berr |
1.3.6.1.4.1.23688.1.1.7 |
Bit error rate bit/sec. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
temperature |
1.3.6.1.4.1.23688.1.1.8 |
Temperature of the unit . |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
maxENspeed |
1.3.6.1.4.1.23688.1.1.9 |
Maximum enabled speed of the radio in Mbit/sec. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
currentRadioSpeed |
1.3.6.1.4.1.23688.1.1.10 |
Current speed of the radio in Mbit/sec |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
type |
1.3.6.1.4.1.23688.1.1.11 |
Uni type. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
txFreq |
1.3.6.1.4.1.23688.1.1.12 |
Frequency of the transmitter in MHz. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
rxFreq |
1.3.6.1.4.1.23688.1.1.13 |
Frequency of the receiver in MHz. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
txDataSpeed |
1.3.6.1.4.1.23688.1.1.14 |
Current data speed of the transmitter in bit/sec. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
rxDataSpeed |
1.3.6.1.4.1.23688.1.1.15 |
Current data speed of the receiver in bit/sec. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
remoteName |
1.3.6.1.4.1.23688.1.1.16 |
Name of the remote Unit. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
remoteIPaddress |
1.3.6.1.4.1.23688.1.1.17 |
IP address of the remote unit |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
atpc |
1.3.6.1.4.1.23688.1.1.18 |
ATPC - Automatic Transmit Power Control (1-enabled, 2-disabled) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
txPower |
1.3.6.1.4.1.23688.1.1.19 |
Actual Transmit Power [dBm] |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
acm |
1.3.6.1.4.1.23688.1.1.20 |
ACM - Adaptive Coding & Modulation (1-enabled, 2-disabled) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
txModulation |
1.3.6.1.4.1.23688.1.1.21 |
Current Modulation (Tx) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qam-2(1), qam-4(2), qam-8(3), qam-16(4), qam-32(5), qam-64(6), qam-128(7), qam-256(8), qam-512(9), qam-1024(10) |
|
rxModulation |
1.3.6.1.4.1.23688.1.1.22 |
Current Modulation (Rx) |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
qam-2(1), qam-4(2), qam-8(3), qam-16(4), qam-32(5), qam-64(6), qam-128(7), qam-256(8), qam-512(9), qam-1024(10) |
|
txBandwidth |
1.3.6.1.4.1.23688.1.1.23 |
Actual Transmit Bandwidth [MHz] |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
rxBandwidth |
1.3.6.1.4.1.23688.1.1.24 |
Actual Receiver Bandwidth [MHz] |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|
licenseExpire |
1.3.6.1.4.1.23688.1.1.25 |
License expire time (time to blocked radio) [day],
0 Blocked, -1 no Expire time set |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Gauge |
|
|