SWITCHING-EXTENSION-MIB

File: SWITCHING-EXTENSION-MIB.mib (203157 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC QUANTA-SWITCH-MIB
SWITCHING-MIB RFC1213-MIB Q-BRIDGE-MIB
IANAifType-MIB IF-MIB INET-ADDRESS-MIB
SNMP-FRAMEWORK-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
IpAddress Integer32 Unsigned32
TimeTicks TEXTUAL-CONVENTION RowStatus
MacAddress TimeStamp quanta
switch AgentPortMask VlanList
DisplayString PhysAddress VlanIndex
dot1qVlanIndex dot1qFdbId IANAifType
ifIndex InterfaceIndex InterfaceIndexOrZero
InetAddressType InetAddress SnmpAdminString

Defined Types

AgentTemperatureFanStatusEntry  
SEQUENCE    
  agentTemperatureFanUnitIndex Integer32
  agentTemperature DisplayString
  agentTemperature1 DisplayString
  agentTemperature2 DisplayString
  agentTemperature3 DisplayString
  agentTemperature4 DisplayString
  agentTemperature5 DisplayString
  agentFAN1 INTEGER
  agentFAN2 INTEGER
  agentFAN3 INTEGER
  agentFAN4 INTEGER
  agentFANChipType DisplayString

AgentPowerSupplyStatusEntry  
SEQUENCE    
  agentPowerSupplyUnitIndex Integer32
  agentPowerSupplyStatus INTEGER
  agentPowerSupplyName DisplayString
  agentPowerSupplyModel DisplayString
  agentPowerSupplyRevisionNumber DisplayString
  agentPowerSupplyManufacturerLocation DisplayString
  agentPowerSupplyManufacturingDate DisplayString
  agentPowerSupplySerialNumber DisplayString
  agentPowerSupplyTemperature1 DisplayString
  agentPowerSupplyTemperature2 DisplayString
  agentPowerSupplyFanSpeed DisplayString
  agentPowerSupplyFanDuty Integer32
  agentPowerConsumption DisplayString

AgentDOMEntry  
SEQUENCE    
  agentDOMtransceiverIndex Integer32
  agentDOMTemperature DisplayString
  agentDOMVoltage DisplayString
  agentDOMBias DisplayString
  agentDOMTxpower DisplayString
  agentDOMRxpower DisplayString
  agentDOMtemperatureHighAlarm DisplayString
  agentDOMtemperatureHighWarning DisplayString
  agentDOMtemperatureLowWarning DisplayString
  agentDOMtemperatureLowAlarm DisplayString
  agentDOMvotageHighAlarm DisplayString
  agentDOMvotageHighWarning DisplayString
  agentDOMvotageLowWarning DisplayString
  agentDOMvotageLowAlarm DisplayString
  agentDOMbiasHighAlarm DisplayString
  agentDOMbiasHighWarning DisplayString
  agentDOMbiasLowWarning DisplayString
  agentDOMbiasLowAlarm DisplayString
  agentDOMtxpowerHighAlarm DisplayString
  agentDOMtxpowerHighWarning DisplayString
  agentDOMtxpowerLowWarning DisplayString
  agentDOMtxpowerLowAlarm DisplayString
  agentDOMrxpowerHighAlarm DisplayString
  agentDOMrxpowerHighWarning DisplayString
  agentDOMrxpowerLowWarning DisplayString
  agentDOMrxpowerLowAlarm DisplayString

Agent10GModuleEntry  
SEQUENCE    
  agent10GModuleUnitIndex Integer32
  agent10GModuleSlotIndex Integer32
  agent10GModulePortIndex Integer32
  agent10GModuleIndex Integer32
  agent10GModuleInterfaceNumber Integer32
  agent10GModuleType DisplayString
  agent10GModuleComplianceCode DisplayString
  agent10GModuleVendorName DisplayString
  agent10GModulePartNumber DisplayString
  agent10GModuleSerialNumber DisplayString
  agent10GModuleRevisionNumber DisplayString
  agent10GModuleManufacturingDate DisplayString

AgentGBICInfoEntry  
SEQUENCE    
  agentGBICInfoIndex Integer32
  agentGBICInfoInterfaceNumber Integer32
  agentGBICInfoComplianceCode DisplayString
  agentGBICInfoVendorName DisplayString
  agentGBICInfoPartNumber DisplayString
  agentGBICInfoSerialNumber DisplayString
  agentGBICInfoRevisionNumber DisplayString
  agentGBICInfoManufacturingDate DisplayString

AgentIpFilterConfigEntry  
SEQUENCE    
  agentIpFilterConfigIndex Integer32
  agentIpFilterConfigName DisplayString
  agentIpFilterConfigIP InetAddress
  agentIpFilterConfigMask InetAddress

AgentSwitchStormControlBroadcastEntry  
SEQUENCE    
  agentSwitchBcastStormIfIndex Integer32
  agentSwitchBcastStormExtensionPktRate Unsigned32
  agentSwitchBcastStormExtensionAdminMode INTEGER

AgentSwitchStormControlMulticastEntry  
SEQUENCE    
  agentSwitchMcastStormIfIndex Integer32
  agentSwitchMcastStormExtensionPktRate Unsigned32
  agentSwitchMcastStormExtensionAdminMode INTEGER

AgentSwitchStormControlUnicastEntry  
SEQUENCE    
  agentSwitchUcastStormIfIndex Integer32
  agentSwitchUcastStormExtensionPktRate Unsigned32
  agentSwitchUcastStormExtensionAdminMode INTEGER

AgentSwitchFlowControlEntry  
SEQUENCE    
  agentSwitchFlowControlIfIndex Integer32
  agentSwitchFlowControlAdminMode INTEGER

AgentSwitchStormControlActionEntry  
SEQUENCE    
  agentSwitchStormControlActionIfIndex Integer32
  agentSwitchStormControlActionShutdownMode INTEGER
  agentSwitchStormControlActionTrapMode INTEGER

AgentPortConfigExtensionEntry  
SEQUENCE    
  agentPortConfigExtensionIfIndex Integer32
  agentPortConfigExtensionAdminMode INTEGER
  agentPortConfigExtensionLinkTrapMode INTEGER
  agentPortConfigExtensionClearStats INTEGER
  agentPortConfigExtensionMaxFrameSizeLimit Integer32
  agentPortConfigExtensionMaxFrameSize Integer32

AgentIgmpSnoopL2MulticastStaticEntry  
SEQUENCE    
  agentIgmpSnoopL2MulticastStaticIndex Unsigned32
  agentIgmpSnoopL2MulticastStaticVlanId Unsigned32
  agentIgmpSnoopL2MulticastStaticMacAddress MacAddress
  agentIgmpSnoopL2MulticastStaticMemberPortMask AgentPortMask
  agentIgmpSnoopL2MulticastStaticActivePortMask AgentPortMask
  agentIgmpSnoopL2MulticastStaticMemberPorts OCTET STRING
  agentIgmpSnoopL2MulticastStaticActivePorts OCTET STRING

AgentMldSnoopL2MulticastStaticEntry  
SEQUENCE    
  agentMldSnoopL2MulticastStaticIndex Unsigned32
  agentMldSnoopL2MulticastStaticVlanId Unsigned32
  agentMldSnoopL2MulticastStaticMacAddress MacAddress
  agentMldSnoopL2MulticastStaticMemberPortMask AgentPortMask
  agentMldSnoopL2MulticastStaticActivePortMask AgentPortMask
  agentMldSnoopL2MulticastStaticMemberPorts OCTET STRING
  agentMldSnoopL2MulticastStaticActivePorts OCTET STRING

AgentLinkStateGroupEntry  
SEQUENCE    
  agentLinkStateGroupId Integer32
  agentLinkStateGroupMode INTEGER
  agentLinkStateGroupUpstreamPort DisplayString
  agentLinkStateGroupDownstreamPort DisplayString
  agentLinkStateGroupStatus RowStatus

AgentPortBackupGroupEntry  
SEQUENCE    
  agentPortBackupGroupId Integer32
  agentPortBackupGroupMode INTEGER
  agentPortBackupGroupActivePort DisplayString
  agentPortBackupGroupBackupPort DisplayString
  agentMacMoveUpdatetMode INTEGER
  agentPortBackupGroupStatus RowStatus
  agentPortBackupGroupFailBackTime Integer32

AgentCDPConfigPortModeEntry  
SEQUENCE    
  agentCDPConfigPortModeIfIndex Integer32
  agentCDPConfigPortModeAdminMode INTEGER

AgentCDPConfigNeighborInfoEntry  
SEQUENCE    
  agentCDPConfigNeighborInfoIndex Integer32
  agentCDPConfigNeighborInfoDeviceID DisplayString
  agentCDPConfigNeighborInfoLocalIF Integer32
  agentCDPConfigNeighborInfoHoldTime Integer32
  agentCDPConfigNeighborInfoCapability DisplayString
  agentCDPConfigNeighborInfoPlatform DisplayString
  agentCDPConfigNeighborInfoPortID DisplayString
  agentCDPConfigNeighborInfoManagementAddress IpAddress

AgentVlanVoiceConfigEntry  
SEQUENCE    
  agentVlanVoiceConfigIndex Integer32
  agentVlanVoiceConfigName DisplayString
  agentVlanVoiceConfigMacAddress DisplayString
  agentVlanVoiceConfigMacMask Integer32
  agentVlanVoiceConfigPriority Integer32
  agentVlanVoiceConfigDelete INTEGER

AgentVoiceVlanConfigEntry  
SEQUENCE    
  agentVoiceVlanConfigIndex Integer32
  agentVoiceVlanConfigIfMode INTEGER
  agentVoiceVlanConfigIfModeValue Integer32
  agentVoiceVlanConfigCosOverrideMode INTEGER
  agentVoiceVlanConfigOperState INTEGER

AgentVTPPortConfigEntry  
SEQUENCE    
  agentVTPPortConfigIndex Integer32
  agentVTPPortConfigTrunkMode INTEGER

AgentFIPSnoopingVlanConfigEntry  
SEQUENCE    
  agentFIPSnoopingVlanIndex Integer32
  agentFIPSnoopingVlanAdminMode INTEGER

AgentFIPSnoopingSessionEntry  
SEQUENCE    
  agentFIPSnoopingSessionKey PhysAddress
  agentFIPSnoopingSessionIfIndex Integer32
  agentFIPSnoopingSessionFCFMacAddress PhysAddress
  agentFIPSnoopingSessionENodeMacAddress PhysAddress
  agentFIPSnoopingSessionENodeIfIndex Integer32

AgentFIPSnoopingFCFEntry  
SEQUENCE    
  agentFIPSnoopingFCFKey PhysAddress
  agentFIPSnoopingFCFIfIndex Integer32
  agentFIPSnoopingFCFVlan VlanIndex
  agentFIPSnoopingFCFENodeNumber Integer32
  agentFIPSnoopingFCFFCMap Integer32
  agentFIPSnoopingFCFSwitchName DisplayString
  agentFIPSnoopingFCFFabricName DisplayString

AgentFIPSnoopingENodeEntry  
SEQUENCE    
  agentFIPSnoopingENodeKey PhysAddress
  agentFIPSnoopingENodeIfIndex Integer32
  agentFIPSnoopingENodeVlan VlanIndex
  agentFIPSnoopingENodeNameID DisplayString

AgentMLAGPortChannelEntry  
SEQUENCE    
  agentMLAGPortChannelifIndex InterfaceIndex
  agentMLAGPortChannelId INTEGER
  agentMLAGPortChannelifIndexStatus INTEGER
  agentMLAGPortChannelConsistancy INTEGER
  agentMLAGPortChannelActiveVlans DisplayString

AgentMLAGVlanRoutingPortEntry  
SEQUENCE    
  agentMLAGVlanRoutingPortifIndex InterfaceIndex
  agentMLAGVlanRoutingPortForbiddenMode INTEGER

AgentDCBXConfigEntry  
SEQUENCE    
  agentDCBXifIndex InterfaceIndex
  agentDCBXAdminMode INTEGER
  agentDCBXVersion INTEGER

AgentDCBXPFCConfigEntry  
SEQUENCE    
  agentDCBXPFCEnableMode INTEGER
  agentDCBXPFCAdvertiseMode INTEGER
  agentDCBXPFCWillingMode INTEGER
  agentDCBXPFCPriorityMask Unsigned32
  agentDCBXPFCMaxTrafficClass Unsigned32
  agentDCBXPFCOperVersion Unsigned32
  agentDCBXPFCOperMaxVersion Unsigned32
  agentDCBXPFCOperErrors DisplayString
  agentDCBXPFCOperMode INTEGER
  agentDCBXPFCOperPeerSyncd INTEGER
  agentDCBXPFCOperPriorityMask Unsigned32
  agentDCBXPFCOperMaxTrafficClass Unsigned32
  agentDCBXPFCPeerLocalifIndex InterfaceIndex
  agentDCBXPFCPeerStatus INTEGER
  agentDCBXPFCPeerEnableMode INTEGER
  agentDCBXPFCPeerWillingMode INTEGER
  agentDCBXPFCPeerPriorityMask Unsigned32
  agentDCBXPFCPeerMaxTrafficClass Unsigned32
  agentDCBXPFCDCBXOperVersion INTEGER

AgentDCBXPgConfigEntry  
SEQUENCE    
  agentDCBXPgEnableMode INTEGER
  agentDCBXPgAdvertiseMode INTEGER
  agentDCBXPgWillingMode INTEGER
  agentDCBXPgGroupBandwidth DisplayString
  agentDCBXPgPriorityGroupId DisplayString
  agentDCBXPgMaxTrafficClass Unsigned32
  agentDCBXPgOperVersion Unsigned32
  agentDCBXPgMaxVersion Unsigned32
  agentDCBXPgErrorReason DisplayString
  agentDCBXPgIsOperational INTEGER
  agentDCBXPgSyncedMode INTEGER
  agentDCBXPgOperGroupBandwidth DisplayString
  agentDCBXPgOperPriorityGroupId DisplayString
  agentDCBXPgOperMaxTrafficClass Unsigned32
  agentDCBXPgPeerStatus INTEGER
  agentDCBXPgPeerEnableMode INTEGER
  agentDCBXPgPeerWillingMode INTEGER
  agentDCBXPgPeerGroupBandwidth DisplayString
  agentDCBXPgPeerPriorityGroupId DisplayString
  agentDCBXPgPeerMaxTrafficClass Unsigned32
  agentDCBXPgDCBXOperVersion INTEGER

BridgeEvbTLVTC  
EVB TLV structure.
TEXTUAL-CONVENTION    
  BITS vdpCapable(0), ecpCapable(1), ecpRTE(2), vdpTimerCapable(3), reflectiveRelayCap(14), stdForwardingCap(15)  

AgentEvbConfigEntry  
SEQUENCE    
  agentEvbifIndex INTEGER
  agentEvbAdminMode INTEGER
  agentEvbCapability BridgeEvbTLVTC
  agentEvbForwardingMode BridgeEvbTLVTC
  agentEvbRetransmissionExp Unsigned32
  agentEvbOperCapability BridgeEvbTLVTC
  agentEvbOperForwardingMode BridgeEvbTLVTC
  agentEvbOperRetransmissionExp Unsigned32

AgentEvbVsiEntry  
SEQUENCE    
  agentEvbVsiInstanceId DisplayString
  agentEvbVsiMgrId Unsigned32
  agentEvbVsiId Unsigned32
  agentEvbVsiVersion Unsigned32
  agentEvbVsiMode INTEGER
  agentEvbVsiState INTEGER
  agentEvbVsiNumMacs Unsigned32

AgentEvbVsiMacEntry  
SEQUENCE    
  agentEvbVsiMacAddress MacAddress
  agentEvbVsiVlanId INTEGER

AgentVMTracerIfCtlEntry  
SEQUENCE    
  agentVMTracerIfIndex INTEGER
  agentVMTracerAdminMode INTEGER

AgentVMTracerSessionEntry  
SEQUENCE    
  agentVMTracerSessionIndex INTEGER
  agentVMTracerSessionName DisplayString
  agentVMTracerSessionUrl DisplayString
  agentVMTracerSessionUsername DisplayString
  agentVMTracerSessionPassword DisplayString
  agentVMTracerSessionAutoVlanMode INTEGER
  agentVMTracerSessionAllowVlan VlanList
  agentVMTracerSessionConnectionStatus INTEGER
  agentVMTracerSessionClear INTEGER

AgentVMTracerVMEntry  
SEQUENCE    
  agentVMTracerVMIndex INTEGER
  agentVMTracerVMName DisplayString
  agentVMTracerVMInterface DisplayString
  agentVMTracerVMAdapter DisplayString
  agentVMTracerVMMacAddress DisplayString
  agentVMTracerVMPortGroup DisplayString
  agentVMTracerVMVlanId Unsigned32
  agentVMTracerVMSwitch DisplayString
  agentVMTracerVMHost DisplayString
  agentVMTracerVMHostCpuSpeed DisplayString
  agentVMTracerVMHostMemory DisplayString
  agentVMTracerVMHostSystem DisplayString
  agentVMTracerVMHostVendor DisplayString
  agentVMTracerVMHostCpuCores Unsigned32
  agentVMTracerVMHostCpuPackages Unsigned32

Defined Values

switchingExtension 1.3.6.1.4.1.7244.2.101
QCI switching extension MIB
MODULE-IDENTITY    

agentInfoGroupExtension 1.3.6.1.4.1.7244.2.101.1
OBJECT IDENTIFIER    

agentInventoryGroupExtension 1.3.6.1.4.1.7244.2.101.1.1
OBJECT IDENTIFIER    

agentInventroyHardwareVersion 1.3.6.1.4.1.7244.2.101.1.1.100
The switch's hardware version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryLoaderVersion 1.3.6.1.4.1.7244.2.101.1.1.102
The Switch's loader version
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryBootRomVersion 1.3.6.1.4.1.7244.2.101.1.1.103
The switch's Boot Rom Version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryOpCodeVersion 1.3.6.1.4.1.7244.2.101.1.1.104
The switch's Operation Code version.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentInventoryLabelRevNumber 1.3.6.1.4.1.7244.2.101.1.1.105
The switch's Label Revision Number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperatureFanStatusTable 1.3.6.1.4.1.7244.2.101.1.1.106
The switch's temperature and FANs information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentTemperatureFanStatusEntry

agentTemperatureFanStatusEntry 1.3.6.1.4.1.7244.2.101.1.1.106.1
entry of temperature and FANs information table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentTemperatureFanStatusEntry  

agentTemperatureFanUnitIndex 1.3.6.1.4.1.7244.2.101.1.1.106.1.1
Unique index of temperature and FANs Information entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentTemperature 1.3.6.1.4.1.7244.2.101.1.1.106.1.2
temperature of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperature1 1.3.6.1.4.1.7244.2.101.1.1.106.1.11
temperature 1 of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperature2 1.3.6.1.4.1.7244.2.101.1.1.106.1.12
temperature 2 of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperature3 1.3.6.1.4.1.7244.2.101.1.1.106.1.13
temperature 3 of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperature4 1.3.6.1.4.1.7244.2.101.1.1.106.1.14
temperature 4 of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentTemperature5 1.3.6.1.4.1.7244.2.101.1.1.106.1.15
temperature 5 of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentFAN1 1.3.6.1.4.1.7244.2.101.1.1.106.1.21
FAN1 status of the unit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

agentFAN2 1.3.6.1.4.1.7244.2.101.1.1.106.1.22
FAN2 status of the unit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

agentFAN3 1.3.6.1.4.1.7244.2.101.1.1.106.1.23
FAN3 status of the unit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

agentFAN4 1.3.6.1.4.1.7244.2.101.1.1.106.1.24
FAN3 status of the unit
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2)  

agentFANChipType 1.3.6.1.4.1.7244.2.101.1.1.106.1.31
fan chip type of the unit
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyStatusTable 1.3.6.1.4.1.7244.2.101.1.1.107
The switch's power supplies information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentPowerSupplyStatusEntry

agentPowerSupplyStatusEntry 1.3.6.1.4.1.7244.2.101.1.1.107.1
entry of power supplies information table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentPowerSupplyStatusEntry  

agentPowerSupplyUnitIndex 1.3.6.1.4.1.7244.2.101.1.1.107.1.1
Unique index of power supplies Information entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentPowerSupplyStatus 1.3.6.1.4.1.7244.2.101.1.1.107.1.2
status of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER active(1), inactive(2), notpresent(3)  

agentPowerSupplyName 1.3.6.1.4.1.7244.2.101.1.1.107.1.3
name of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyModel 1.3.6.1.4.1.7244.2.101.1.1.107.1.4
model of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyRevisionNumber 1.3.6.1.4.1.7244.2.101.1.1.107.1.5
revision number of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyManufacturerLocation 1.3.6.1.4.1.7244.2.101.1.1.107.1.6
manufacturer location of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyManufacturingDate 1.3.6.1.4.1.7244.2.101.1.1.107.1.7
manufacturing date of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplySerialNumber 1.3.6.1.4.1.7244.2.101.1.1.107.1.8
serial number of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyTemperature1 1.3.6.1.4.1.7244.2.101.1.1.107.1.9
temperature 1 of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyTemperature2 1.3.6.1.4.1.7244.2.101.1.1.107.1.10
temperature 2 of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyFanSpeed 1.3.6.1.4.1.7244.2.101.1.1.107.1.11
fan speed of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentPowerSupplyFanDuty 1.3.6.1.4.1.7244.2.101.1.1.107.1.12
fan duty of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentPowerConsumption 1.3.6.1.4.1.7244.2.101.1.1.107.1.13
power consumption of the power supply
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMTable 1.3.6.1.4.1.7244.2.101.1.1.108
The switch's dom information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDOMEntry

agentDOMEntry 1.3.6.1.4.1.7244.2.101.1.1.108.1
entry of dom information table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDOMEntry  

agentDOMtransceiverIndex 1.3.6.1.4.1.7244.2.101.1.1.108.1.1
Unique index of dom Information entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentDOMTemperature 1.3.6.1.4.1.7244.2.101.1.1.108.1.2
temperature of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMVoltage 1.3.6.1.4.1.7244.2.101.1.1.108.1.3
votage of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMBias 1.3.6.1.4.1.7244.2.101.1.1.108.1.4
Bias current of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMTxpower 1.3.6.1.4.1.7244.2.101.1.1.108.1.5
Tx Power of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMRxpower 1.3.6.1.4.1.7244.2.101.1.1.108.1.6
Rx Power of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtemperatureHighAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.7
Temperature high alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtemperatureHighWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.8
Temperature high warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtemperatureLowWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.9
Temperature low warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtemperatureLowAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.10
Temperature low alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMvotageHighAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.11
Votage high alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMvotageHighWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.12
Votage high warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMvotageLowWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.13
Votage low warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMvotageLowAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.14
Votage low alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMbiasHighAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.15
Bias high alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMbiasHighWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.16
Bias high warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMbiasLowWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.17
Bias low warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMbiasLowAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.18
Bias low alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtxpowerHighAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.19
Tx Power high alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtxpowerHighWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.20
Tx Power high warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtxpowerLowWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.21
Tx Power low warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMtxpowerLowAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.22
Tx Power low alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMrxpowerHighAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.23
Rx Power high alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMrxpowerHighWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.24
Rx Power high warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMrxpowerLowWarning 1.3.6.1.4.1.7244.2.101.1.1.108.1.25
Rx Power low warning of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMrxpowerLowAlarm 1.3.6.1.4.1.7244.2.101.1.1.108.1.26
Rx Power low alarm of the transceiver module
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDOMGroup 1.3.6.1.4.1.7244.2.101.100
OBJECT IDENTIFIER    

agentDOMAdminMode 1.3.6.1.4.1.7244.2.101.100.1
Enable or disable the DOM feature. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDOMInterval 1.3.6.1.4.1.7244.2.101.100.2
Configure the interval of Digital Optical Monitor.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 300..1800  

agent10GModuleInfoGroupExtension 1.3.6.1.4.1.7244.2.101.1.2
OBJECT IDENTIFIER    

agent10GModuleTable 1.3.6.1.4.1.7244.2.101.1.2.107
The switch's 10G module information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Agent10GModuleEntry

agent10GModuleEntry 1.3.6.1.4.1.7244.2.101.1.2.107.1
entry of 10G module information table
Status: current Access: not-accessible
OBJECT-TYPE    
  Agent10GModuleEntry  

agent10GModuleUnitIndex 1.3.6.1.4.1.7244.2.101.1.2.107.1.1
The unit number associated with this unit.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agent10GModuleSlotIndex 1.3.6.1.4.1.7244.2.101.1.2.107.1.2
Unique slot index in 10G module entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agent10GModulePortIndex 1.3.6.1.4.1.7244.2.101.1.2.107.1.3
Unique port index of the slot in 10G module entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agent10GModuleIndex 1.3.6.1.4.1.7244.2.101.1.2.107.1.4
Unique index of 10G module entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agent10GModuleInterfaceNumber 1.3.6.1.4.1.7244.2.101.1.2.107.1.5
Interface number of the corresponding 10G module index entry.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agent10GModuleType 1.3.6.1.4.1.7244.2.101.1.2.107.1.6
10G module's types. It could be CX4 or SFP Plus.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModuleComplianceCode 1.3.6.1.4.1.7244.2.101.1.2.107.1.7
10G module's Compliance codes
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModuleVendorName 1.3.6.1.4.1.7244.2.101.1.2.107.1.8
10G module's vendor name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModulePartNumber 1.3.6.1.4.1.7244.2.101.1.2.107.1.9
10G module's part number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModuleSerialNumber 1.3.6.1.4.1.7244.2.101.1.2.107.1.10
10G module's serial number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModuleRevisionNumber 1.3.6.1.4.1.7244.2.101.1.2.107.1.11
10G module's revision number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agent10GModuleManufacturingDate 1.3.6.1.4.1.7244.2.101.1.2.107.1.12
10G module's Manufacturing date.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoTable 1.3.6.1.4.1.7244.2.101.1.3
The switch's GBIC information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentGBICInfoEntry

agentGBICInfoEntry 1.3.6.1.4.1.7244.2.101.1.3.1
entry of GBIC information table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentGBICInfoEntry  

agentGBICInfoIndex 1.3.6.1.4.1.7244.2.101.1.3.1.1
Unique index of GBIC Information entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentGBICInfoInterfaceNumber 1.3.6.1.4.1.7244.2.101.1.3.1.2
interface number of the corresponding GBIC index entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentGBICInfoComplianceCode 1.3.6.1.4.1.7244.2.101.1.3.1.3
Gigabit Ethernet Compliance codes
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoVendorName 1.3.6.1.4.1.7244.2.101.1.3.1.4
GBIC vendor name
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoPartNumber 1.3.6.1.4.1.7244.2.101.1.3.1.5
GBIC part number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoSerialNumber 1.3.6.1.4.1.7244.2.101.1.3.1.6
GBIC serial number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoRevisionNumber 1.3.6.1.4.1.7244.2.101.1.3.1.7
GBIC revision number
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentGBICInfoManufacturingDate 1.3.6.1.4.1.7244.2.101.1.3.1.8
GBIC manufacturing date
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2
OBJECT IDENTIFIER    

agentCLIConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.1
OBJECT IDENTIFIER    

agentSerialGroupExtension 1.3.6.1.4.1.7244.2.101.2.1.5
OBJECT IDENTIFIER    

agentSerialPasswdCnt 1.3.6.1.4.1.7244.2.101.2.1.5.100
The switch's serial port password count threshold.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

agentSerialPasswdCntSetToDefault 1.3.6.1.4.1.7244.2.101.2.1.5.101
Set the switch's serial port password count threshold to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSerialSilentTime 1.3.6.1.4.1.7244.2.101.2.1.5.102
If a user fail to login into the console for agentSerialPasswdCnt times, the user cannot login again for a period of agentSerialSilentTime seconds
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..65535  

agentSerialSilentTimeSetToDefault 1.3.6.1.4.1.7244.2.101.2.1.5.103
Set the switch's serial port silent time to the default value.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVtyGroupExtension 1.3.6.1.4.1.7244.2.101.2.1.6
OBJECT IDENTIFIER    

agentVtyTelnetServerAdminMode 1.3.6.1.4.1.7244.2.101.2.1.6.103
The switch's telnet server admin mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVtyPasswdCnt 1.3.6.1.4.1.7244.2.101.2.1.6.104
The switch's password count threshold for telnet and SSH connections. System will reject telnet or SSH connections if users fail the password authentication for agentVtyPasswdCnt times
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..120  

agentVtyPasswdCntSetToDefault 1.3.6.1.4.1.7244.2.101.2.1.6.105
Set the switch's password count threshold to the default value for telnet and SSH connections.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVtyTerminalLength 1.3.6.1.4.1.7244.2.101.2.1.6.106
The switch's terminal length for telnet connections.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 10..100  

agentVtyTerminalLengthSetToDefault 1.3.6.1.4.1.7244.2.101.2.1.6.107
Set the switch's terminal length to the default value for telnet connections.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentNetworkConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.3
OBJECT IDENTIFIER    

agentNetworkHttpPort 1.3.6.1.4.1.7244.2.101.2.3.100
The switch's HTTP port number.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..65535  

agentNetworkDhcpClientIfClientIdFormat 1.3.6.1.4.1.7244.2.101.2.3.101
Set the switch's client ID agentNetworkDhcpClientIfClientId format. It could be HEX(00:00:00:00:00:00) or TEXT( which length is less or equal to 32)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER hexformat(1), textformat(2)  

agentNetworkDhcpClientIfClientId 1.3.6.1.4.1.7244.2.101.2.3.102
Set the switch's Client ID. The client ID is used in asking for an IP address from the DHCP server. It could be HEX(00:00:00:00:00:00) or TEXT( which length is less or equal to 32)
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..32)  

agentNetworkDhcpSetToInventoryClientIfClientId 1.3.6.1.4.1.7244.2.101.2.3.103
If enable, set switch's Client ID to the inventory's default value
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentNetworkDhcpRestart 1.3.6.1.4.1.7244.2.101.2.3.104
If restart, release current IP address and Re-get the switch's IP address from the DHCP/BOOTP server
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER restart(1), noRestart(2)  

agentSwitchConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.8
OBJECT IDENTIFIER    

agentIPFilterConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.8.10
OBJECT IDENTIFIER    

agentIPFilterConfigAdminMode 1.3.6.1.4.1.7244.2.101.2.8.10.10
enable/disable IP filter function of the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpFilterConfigCreate 1.3.6.1.4.1.7244.2.101.2.8.10.11
Creates a new IpFilter entry with name and ip mask or ipv6/prefix length. Max length of ip filter name is 64. Ipv4 Example: IpFilterName 1.1.1.1 255.255.255.0 Ipv6 Example: IpFilterName2 1111::1/64
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentIpFilterConfigDelete 1.3.6.1.4.1.7244.2.101.2.8.10.12
Delete a IpFilter entry by name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentIpFilterConfigTable 1.3.6.1.4.1.7244.2.101.2.8.10.30
The switch's IP filter table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpFilterConfigEntry

agentIpFilterConfigEntry 1.3.6.1.4.1.7244.2.101.2.8.10.30.1
entry of IP filter table
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpFilterConfigEntry  

agentIpFilterConfigIndex 1.3.6.1.4.1.7244.2.101.2.8.10.30.1.1
Unique index of IP Filter entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentIpFilterConfigIP 1.3.6.1.4.1.7244.2.101.2.8.10.30.1.2
set the IPv4/IPv6 address which are allowed to connect to DUT IP should be changed with mask.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

agentIpFilterConfigMask 1.3.6.1.4.1.7244.2.101.2.8.10.30.1.3
set the IPv4/IPv6 mask for defining an IPv4/IPv6 range. IP should be changed with mask.
Status: current Access: read-write
OBJECT-TYPE    
  InetAddress  

agentIpFilterConfigName 1.3.6.1.4.1.7244.2.101.2.8.10.30.1.4
The name of IpFilter entry.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..64)  

agentTransferConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.9
OBJECT IDENTIFIER    

agentTransferCopyGroup 1.3.6.1.4.1.7244.2.101.2.9.3
OBJECT IDENTIFIER    

agentTransferCopyRunningConfigToSwitchDestFilename 1.3.6.1.4.1.7244.2.101.2.9.3.1
The filename used to store current running config in the switch. It can be up to 30 alphanumeric characters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

agentTransferCopyRunningConfigStart 1.3.6.1.4.1.7244.2.101.2.9.3.2
Copy running configure to switch, the filename is specified in agentTransferCopyRunningConfigToSwitchDestFilename.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentTransferCopyRunningConfigStatus 1.3.6.1.4.1.7244.2.101.2.9.3.3
Indicates the current status of a copy running configure operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(0), failure(1), wrongFileType(4), noPartitionTableEntry(15), runByOtherUsers(16)  

agentTransferDeleteGroup 1.3.6.1.4.1.7244.2.101.2.9.4
OBJECT IDENTIFIER    

agentTransferDeleteSwitchFilename 1.3.6.1.4.1.7244.2.101.2.9.4.1
The filename of the file to be deleted from the switch. It can be up to 32 alphanumeric characters.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentTransferDeleteStart 1.3.6.1.4.1.7244.2.101.2.9.4.2
start deleting file; the filename is specified in agentTransferDeleteSwitchFilename.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentTransferDeleteStatus 1.3.6.1.4.1.7244.2.101.2.9.4.3
Indicates the current status of the deleting operation.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(0), failure(1)  

agentStormContorlConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.8.18
OBJECT IDENTIFIER    

agentSwitchBroadcastControlMode 1.3.6.1.4.1.7244.2.101.2.8.18.1
The switch config broadcast allows you to enable or disable broadcast storm recovery mode. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the broadcast traffic until the broadcast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchMulticastControlMode 1.3.6.1.4.1.7244.2.101.2.8.18.2
The switch config multicast allows you to enable or disable multicast storm recovery mode. When you specify Enable for Multicast Storm Recovery and the multicast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the multicast traffic until the multicast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchUnicastControlMode 1.3.6.1.4.1.7244.2.101.2.8.18.3
The switch config unicast allows you to enable or disable unicast storm recovery mode. When you specify Enable for unicast Storm Recovery and the unicast traffic on any Ethernet port exceeds 20 percent of the link speed, the switch blocks (discards) the unicast traffic until the unicast traffic returns to 10 percent or less. Upper limit for 10M link is 20% and lower limit is 10%. For 100M link Upper limit is 5% and lower limit is 2%
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchDot3FlowControlMode 1.3.6.1.4.1.7244.2.101.2.8.18.4
Config switchconfig flowcontrol allows you to enable or disable 802.3x flow control for the switch. This value applies to only full-duplex mode ports.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchStormControlBroadcastTable 1.3.6.1.4.1.7244.2.101.2.8.18.10
The switch's storm control table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchStormControlBroadcastEntry

agentSwitchStormControlBroadcastEntry 1.3.6.1.4.1.7244.2.101.2.8.18.10.1
storm control for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchStormControlBroadcastEntry  

agentSwitchBcastStormIfIndex 1.3.6.1.4.1.7244.2.101.2.8.18.10.1.1
Unique index of switch broadcast storm entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentSwitchBcastStormExtensionPktRate 1.3.6.1.4.1.7244.2.101.2.8.18.10.1.2
The Pkt rate, range is from 1 to 14880000.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..14880000  

agentSwitchBcastStormExtensionAdminMode 1.3.6.1.4.1.7244.2.101.2.8.18.10.1.3
enable/disable broadcast storm control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchStormControlMulticastTable 1.3.6.1.4.1.7244.2.101.2.8.18.20
The switch's storm control table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchStormControlMulticastEntry

agentSwitchStormControlMulticastEntry 1.3.6.1.4.1.7244.2.101.2.8.18.20.1
storm control for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchStormControlMulticastEntry  

agentSwitchMcastStormIfIndex 1.3.6.1.4.1.7244.2.101.2.8.18.20.1.1
Unique index of switch Multicast storm entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentSwitchMcastStormExtensionPktRate 1.3.6.1.4.1.7244.2.101.2.8.18.20.1.2
The Pkt rate, range is from 1 to 14880000.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..14880000  

agentSwitchMcastStormExtensionAdminMode 1.3.6.1.4.1.7244.2.101.2.8.18.20.1.3
enable/disable Multicast storm control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchStormControlUnicastTable 1.3.6.1.4.1.7244.2.101.2.8.18.30
The switch's storm control table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchStormControlUnicastEntry

agentSwitchStormControlUnicastEntry 1.3.6.1.4.1.7244.2.101.2.8.18.30.1
storm control for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchStormControlUnicastEntry  

agentSwitchUcastStormIfIndex 1.3.6.1.4.1.7244.2.101.2.8.18.30.1.1
Unique index of switch Unicast storm entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentSwitchUcastStormExtensionPktRate 1.3.6.1.4.1.7244.2.101.2.8.18.30.1.2
The Pkt rate, range is from 1 to 14880000.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..14880000  

agentSwitchUcastStormExtensionAdminMode 1.3.6.1.4.1.7244.2.101.2.8.18.30.1.3
enable/disable ingress rate limit
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchFlowControlTable 1.3.6.1.4.1.7244.2.101.2.8.18.40
The switch's storm control table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchFlowControlEntry

agentSwitchFlowControlEntry 1.3.6.1.4.1.7244.2.101.2.8.18.40.1
storm control for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchFlowControlEntry  

agentSwitchFlowControlIfIndex 1.3.6.1.4.1.7244.2.101.2.8.18.40.1.1
Unique index of switch FlowControl storm entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentSwitchFlowControlAdminMode 1.3.6.1.4.1.7244.2.101.2.8.18.40.1.2
enable/disable FlowControl storm control
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchStormControlActionTable 1.3.6.1.4.1.7244.2.101.2.8.18.50
The switch's storm control table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentSwitchStormControlActionEntry

agentSwitchStormControlActionEntry 1.3.6.1.4.1.7244.2.101.2.8.18.50.1
storm control for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentSwitchStormControlActionEntry  

agentSwitchStormControlActionIfIndex 1.3.6.1.4.1.7244.2.101.2.8.18.50.1.1
Unique index of switch StormControlAction storm entry
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentSwitchStormControlActionShutdownMode 1.3.6.1.4.1.7244.2.101.2.8.18.50.1.2
Shutdown this interface if a storm occurs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentSwitchStormControlActionTrapMode 1.3.6.1.4.1.7244.2.101.2.8.18.50.1.3
Send SNMP trap if a storm occurs.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryConfigGroupExtension 1.3.6.1.4.1.7244.2.101.2.8.28
OBJECT IDENTIFIER    

agentErrRecoveryInterval 1.3.6.1.4.1.7244.2.101.2.8.28.1
Configure Recovery Timer Interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 30..86400  

agentErrRecoveryStormCtrlCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.2
Enable/Disable timer to recover from storm-control error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryUdldCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.3
Enable/Disable timer to recover from udld error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryPortSecurityCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.4
Enable/Disable timer to recover from port-security error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryBpduCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.5
Enable/Disable timer to recover from bpdu error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryLinkFlapCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.6
Enable/Disable timer to recover from link flap error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrRecoveryMacFlapCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.7
Enable/Disable timer to recover from MAC flap error disable state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrDetectLinkFlapCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.8
Enable/Disable error disable detection for link flapping state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentErrDetectMacFlapCauseMode 1.3.6.1.4.1.7244.2.101.2.8.28.9
Enable/Disable error disable detection for MAC flapping state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortConfigExtensionTable 1.3.6.1.4.1.7244.2.101.2.13
The switch's port capability table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentPortConfigExtensionEntry

agentPortConfigExtensionEntry 1.3.6.1.4.1.7244.2.101.2.13.1
port capability setting for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentPortConfigExtensionEntry  

agentPortConfigExtensionIfIndex 1.3.6.1.4.1.7244.2.101.2.13.1.1
port index used to uniquelly identify an entry of the port capability Table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentPortConfigExtensionAdminMode 1.3.6.1.4.1.7244.2.101.2.13.1.6
The switch's Port Admin Mode
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortConfigExtensionLinkTrapMode 1.3.6.1.4.1.7244.2.101.2.13.1.9
If enabled, link up and link down traps will be sent for this port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortConfigExtensionClearStats 1.3.6.1.4.1.7244.2.101.2.13.1.10
clear stats for this port only
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortConfigExtensionMaxFrameSizeLimit 1.3.6.1.4.1.7244.2.101.2.13.1.18
This object identifies the largest value that can be configured for agentPortConfigExtensionMaxFrameSize
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1518..12288  

agentPortConfigExtensionMaxFrameSize 1.3.6.1.4.1.7244.2.101.2.13.1.19
This object identifies the currently configured maximum frame size value for this port. The maximmum value that this object can be set to is the value of agentPortConfigExtensionMaxFrameSizeLimit. For Ethernet ports which support 802.1Q vlan tagging, the minimum value that this object can be set to is 1522
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1518..12288  

agentSwitchSnoopingGroupExtension 1.3.6.1.4.1.7244.2.101.2.8.6
OBJECT IDENTIFIER    

agentIgmpSnoopL2MulticastStaticTable 1.3.6.1.4.1.7244.2.101.2.8.6.112
Table for IGMP snooping static multicast addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIgmpSnoopL2MulticastStaticEntry

agentIgmpSnoopL2MulticastStaticEntry 1.3.6.1.4.1.7244.2.101.2.8.6.112.1
Entry for static multicast addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIgmpSnoopL2MulticastStaticEntry  

agentIgmpSnoopL2MulticastStaticIndex 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.1
Unique index of agentIgmpSnoopL2MulticastStaticEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentIgmpSnoopL2MulticastStaticVlanId 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.2
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentIgmpSnoopL2MulticastStaticMacAddress 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.3
MAC address of multicast group.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentIgmpSnoopL2MulticastStaticMemberPortMask 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.4
IGMP Snooping L2 Multicast Static Port Mask.
Status: current Access: read-only
OBJECT-TYPE    
  AgentPortMask  

agentIgmpSnoopL2MulticastStaticActivePortMask 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.5
IGMP Snooping L2 Multicast Static Active Port Mask.
Status: current Access: read-only
OBJECT-TYPE    
  AgentPortMask  

agentIgmpSnoopL2MulticastStaticMemberPorts 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.6
The set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

agentIgmpSnoopL2MulticastStaticActivePorts 1.3.6.1.4.1.7244.2.101.2.8.6.112.1.7
The set of ports which are active. (2,3) means port 2 and port 3 are active.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

agentMldSnoopL2MulticastStaticTable 1.3.6.1.4.1.7244.2.101.2.8.6.113
Table for MLD snooping static multicast addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentMldSnoopL2MulticastStaticEntry

agentMldSnoopL2MulticastStaticEntry 1.3.6.1.4.1.7244.2.101.2.8.6.113.1
Entry for static multicast addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentMldSnoopL2MulticastStaticEntry  

agentMldSnoopL2MulticastStaticIndex 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.1
Unique index of agentMldSnoopL2MulticastStaticEntry.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentMldSnoopL2MulticastStaticVlanId 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.2
This is defined as dot1qVlanIndex in the Q-BRIDGE-MIB.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentMldSnoopL2MulticastStaticMacAddress 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.3
MAC address of multicast group.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentMldSnoopL2MulticastStaticMemberPortMask 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.4
MLD Snooping L2 Multicast Static Port Mask.
Status: current Access: read-only
OBJECT-TYPE    
  AgentPortMask  

agentMldSnoopL2MulticastStaticActivePortMask 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.5
MLD Snooping L2 Multicast Static Active Port Mask.
Status: current Access: read-only
OBJECT-TYPE    
  AgentPortMask  

agentMldSnoopL2MulticastStaticMemberPorts 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.6
The set of ports which are members. (2,3) means port 2 and port 3 are Multicast Static Ports.
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

agentMldSnoopL2MulticastStaticActivePorts 1.3.6.1.4.1.7244.2.101.2.8.6.113.1.7
The set of ports which are active. (2,3) means port 2 and port 3 are active.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

agentSwitchCurrBootFilesGroupExtension 1.3.6.1.4.1.7244.2.101.103
OBJECT IDENTIFIER    

agentSwitchCurrBootRomFileName 1.3.6.1.4.1.7244.2.101.103.1
Current BootRom Filename. This is shown on vxWorks plateforms.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

agentSwitchCurrBootLoaderFileName 1.3.6.1.4.1.7244.2.101.103.3
Current Boot Loader Filename. This is shown on vxWorks plateforms.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentSwitchCurrBootConfigFileName 1.3.6.1.4.1.7244.2.101.103.5
Current configuration Filename
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

agentSwitchCurrBootOpCodeFileName 1.3.6.1.4.1.7244.2.101.103.7
Current Operation Code Filename
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..30)  

agentSwitchCurrUBootFileName 1.3.6.1.4.1.7244.2.101.103.9
Current UBoot Filename. This is shown on linux plateforms.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentSwitchCurrKernelFileName 1.3.6.1.4.1.7244.2.101.103.11
Current Kernel Filename. This is shown on linux plateforms.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentSwitchCurrVMTracerFileName 1.3.6.1.4.1.7244.2.101.103.12
Current VMTracer image Filename. This is shown on vmtracer supported L3 linux plateforms.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentLinkStateConfigGroup 1.3.6.1.4.1.7244.2.101.15
OBJECT IDENTIFIER    

agentLinkStateConfigAdminMode 1.3.6.1.4.1.7244.2.101.15.1
The administration mode of the Link state.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLinkStateGroupTable 1.3.6.1.4.1.7244.2.101.15.2
This table includes entries for the status of all currently configured Link state group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentLinkStateGroupEntry

agentLinkStateGroupEntry 1.3.6.1.4.1.7244.2.101.15.2.1
This table includes entries for the status of all currently configured Link state group.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentLinkStateGroupEntry  

agentLinkStateGroupId 1.3.6.1.4.1.7244.2.101.15.2.1.1
The id of the Link State group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

agentLinkStateGroupMode 1.3.6.1.4.1.7244.2.101.15.2.1.2
The mode of this Link State group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentLinkStateGroupUpstreamPort 1.3.6.1.4.1.7244.2.101.15.2.1.3
The up stream port of the Link State group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentLinkStateGroupDownstreamPort 1.3.6.1.4.1.7244.2.101.15.2.1.4
The down stream port of the Link State group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentLinkStateGroupStatus 1.3.6.1.4.1.7244.2.101.15.2.1.5
The status of Link State group. active(1) - This group setting is active. createAndGo(4) - Set to this value to create a new group. destroy(6) - Set to this value to remove this group.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentPortBackupConfigGroup 1.3.6.1.4.1.7244.2.101.16
OBJECT IDENTIFIER    

agentPortBackupConfigAdminMode 1.3.6.1.4.1.7244.2.101.16.1
The administration mode of the Port-backup.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortBackupGroupTable 1.3.6.1.4.1.7244.2.101.16.2
This table includes entries for the status of all currently configured Port-backup group.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentPortBackupGroupEntry

agentPortBackupGroupEntry 1.3.6.1.4.1.7244.2.101.16.2.1
This table includes entries for the status of all currently configured Port-backup group.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentPortBackupGroupEntry  

agentPortBackupGroupId 1.3.6.1.4.1.7244.2.101.16.2.1.1
The id of the Port-backup group.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 1..6  

agentPortBackupGroupMode 1.3.6.1.4.1.7244.2.101.16.2.1.2
The mode of this Port-backup group.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortBackupGroupActivePort 1.3.6.1.4.1.7244.2.101.16.2.1.3
The active port of the Port-backup group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentPortBackupGroupBackupPort 1.3.6.1.4.1.7244.2.101.16.2.1.4
The backup port of the Port-backup group.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentMacMoveUpdatetMode 1.3.6.1.4.1.7244.2.101.16.2.1.5
The mode of MAC Address-Table Move Update.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentPortBackupGroupStatus 1.3.6.1.4.1.7244.2.101.16.2.1.6
The status of Port-backup group. active(1) - This group setting is active. createAndGo(4) - Set to this value to create a new group. destroy(6) - Set to this value to remove this group.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentPortBackupGroupFailBackTime 1.3.6.1.4.1.7244.2.101.16.2.1.7
The value of the Port-backup fail back time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..60  

agentCDPConfigGroup 1.3.6.1.4.1.7244.2.101.110
OBJECT IDENTIFIER    

agentCDPConfigAdminMode 1.3.6.1.4.1.7244.2.101.110.1
enable/disable CDP (Cisco Discovery Protocol)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentCDPConfigTimeToLive 1.3.6.1.4.1.7244.2.101.110.2
The time that CDP information will be kept in other CDP-aware switch. The range is 10 to 255.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 10..255  

agentCDPConfigTransmitInterval 1.3.6.1.4.1.7244.2.101.110.3
The time interval that the CDP information is sent. The range is 5 to 254.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 5..254  

agentCDPConfigNumInPkts 1.3.6.1.4.1.7244.2.101.110.4
The number of CDP packets received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigNumOutPkts 1.3.6.1.4.1.7244.2.101.110.5
The number of CDP packets sent out.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigNumErrPkts 1.3.6.1.4.1.7244.2.101.110.6
The number of error CDP packets received/sent.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigResetNumPkts 1.3.6.1.4.1.7244.2.101.110.7
reset CDP in/out/err packet counters
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentCDPConfigResetDeviceInformation 1.3.6.1.4.1.7244.2.101.110.8
clear CDP neighbor information
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentCDPConfigPortModeTable 1.3.6.1.4.1.7244.2.101.110.10
The switch CDP administration table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentCDPConfigPortModeEntry

agentCDPConfigPortModeEntry 1.3.6.1.4.1.7244.2.101.110.10.1
CDP administration setting for a specific port.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentCDPConfigPortModeEntry  

agentCDPConfigPortModeIfIndex 1.3.6.1.4.1.7244.2.101.110.10.1.1
port index used to uniquelly identify an entry of the CDP administration Table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigPortModeAdminMode 1.3.6.1.4.1.7244.2.101.110.10.1.2
CDP administration for every individual port.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentCDPConfigNeighborInfoTable 1.3.6.1.4.1.7244.2.101.110.20
The switch CDP neighbor information table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentCDPConfigNeighborInfoEntry

agentCDPConfigNeighborInfoEntry 1.3.6.1.4.1.7244.2.101.110.20.1
CDP neighbor information.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentCDPConfigNeighborInfoEntry  

agentCDPConfigNeighborInfoIndex 1.3.6.1.4.1.7244.2.101.110.20.1.1
index used to uniquelly identify an entry of the CDP neighbor information Table
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigNeighborInfoDeviceID 1.3.6.1.4.1.7244.2.101.110.20.1.2
neighbor CDP device ID.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentCDPConfigNeighborInfoLocalIF 1.3.6.1.4.1.7244.2.101.110.20.1.3
Local IF number from which the CDP packets are received.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigNeighborInfoHoldTime 1.3.6.1.4.1.7244.2.101.110.20.1.4
CDP packets' time to live.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentCDPConfigNeighborInfoCapability 1.3.6.1.4.1.7244.2.101.110.20.1.5
neighborhood's capabilities.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentCDPConfigNeighborInfoPlatform 1.3.6.1.4.1.7244.2.101.110.20.1.6
neighborhood's platform.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentCDPConfigNeighborInfoPortID 1.3.6.1.4.1.7244.2.101.110.20.1.7
neighborhood's port ID from which the CDP packets are sent out.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentCDPConfigNeighborInfoManagementAddress 1.3.6.1.4.1.7244.2.101.110.20.1.8
neighborhood's management address from which the CDP packets are sent out.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentVlanVoiceConfigGroup 1.3.6.1.4.1.7244.2.101.111
OBJECT IDENTIFIER    

agentVlanVoiceVlanIDCreate 1.3.6.1.4.1.7244.2.101.111.1
The Voice Vlan Vlan Id.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..4093  

agentVlanVoiceAdminMode 1.3.6.1.4.1.7244.2.101.111.2
The Voice Vlan administration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVlanVoiceMacAddress 1.3.6.1.4.1.7244.2.101.111.3
The Voice Vlan MAC address. Multicast mac address is not allowed.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentVlanVoiceMacMask 1.3.6.1.4.1.7244.2.101.111.4
The Voice Vlan MAC mask.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0 | 128 | 192 | 224 | 240 | 248 | 252 | 254 | 255  

agentVlanVoicePriority 1.3.6.1.4.1.7244.2.101.111.5
The Voice Vlan priority.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..7  

agentVlanVoiceName 1.3.6.1.4.1.7244.2.101.111.6
The Voice Vlan name.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString  

agentVlanVoiceConfigTable 1.3.6.1.4.1.7244.2.101.111.7
The switch Voice Vlan show table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVlanVoiceConfigEntry

agentVlanVoiceConfigEntry 1.3.6.1.4.1.7244.2.101.111.7.1
The switch Voice Vlan show entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVlanVoiceConfigEntry  

agentVlanVoiceConfigIndex 1.3.6.1.4.1.7244.2.101.111.7.1.1
Voice Vlan Index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVlanVoiceConfigName 1.3.6.1.4.1.7244.2.101.111.7.1.2
The Voice Vlan name.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVlanVoiceConfigMacAddress 1.3.6.1.4.1.7244.2.101.111.7.1.3
The Voice Vlan MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVlanVoiceConfigMacMask 1.3.6.1.4.1.7244.2.101.111.7.1.4
The Voice Vlan MAC mask.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0 | 128 | 192 | 224 | 240 | 248 | 252 | 254 | 255  

agentVlanVoiceConfigPriority 1.3.6.1.4.1.7244.2.101.111.7.1.5
The Voice Vlan priority.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..7  

agentVlanVoiceConfigDelete 1.3.6.1.4.1.7244.2.101.111.7.1.6
Remove Voice Vlan entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVoiceVlanConfigGroup 1.3.6.1.4.1.7244.2.101.114
OBJECT IDENTIFIER    

agentVoiceVlanAdminMode 1.3.6.1.4.1.7244.2.101.114.1
The Voice Vlan administration Mode. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVoiceVlanConfigTable 1.3.6.1.4.1.7244.2.101.114.2
The switch Voice Vlan show table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVoiceVlanConfigEntry

agentVoiceVlanConfigEntry 1.3.6.1.4.1.7244.2.101.114.2.1
The switch Voice Vlan show entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVoiceVlanConfigEntry  

agentVoiceVlanConfigIndex 1.3.6.1.4.1.7244.2.101.114.2.1.1
Voice Vlan Index.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..4093  

agentVoiceVlanConfigIfMode 1.3.6.1.4.1.7244.2.101.114.2.1.2
The Voice VLAN mode for selected interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), vlanid(1), dot1p(2), none(3), untagged(4)  

agentVoiceVlanConfigIfModeValue 1.3.6.1.4.1.7244.2.101.114.2.1.3
The Voice VLAN mode value of the selected interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVoiceVlanConfigCosOverrideMode 1.3.6.1.4.1.7244.2.101.114.2.1.4
The CoS Override mode for selected interface. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVoiceVlanConfigOperState 1.3.6.1.4.1.7244.2.101.114.2.1.5
The operational status of the voice vlan of the given interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVTPConfigGroup 1.3.6.1.4.1.7244.2.101.115
OBJECT IDENTIFIER    

agentVTPAdminMode 1.3.6.1.4.1.7244.2.101.115.1
Enable or disable the VTP feature. The default mode is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVTPVersion 1.3.6.1.4.1.7244.2.101.115.2
The VTP version.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVTPConfigRevision 1.3.6.1.4.1.7244.2.101.115.3
The revision for the VTP domain status.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVTPMaxVlanNumSupported 1.3.6.1.4.1.7244.2.101.115.4
The maximum VLANs supported for VTP.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVTPVlanNumSupported 1.3.6.1.4.1.7244.2.101.115.5
The VLAN number for VTP currently.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVTPOperatingMode 1.3.6.1.4.1.7244.2.101.115.6
The operational mode of VTP device. The default setting is server mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER server(0), client(1), transparent(2)  

agentVTPDomainName 1.3.6.1.4.1.7244.2.101.115.7
The name of the VTP administrative domain.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentVTPPruningMode 1.3.6.1.4.1.7244.2.101.115.8
Enable or disable the VTP pruning mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVTPDomainPassword 1.3.6.1.4.1.7244.2.101.115.9
The the password for the VTP administrative domain.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentVTPV2Mode 1.3.6.1.4.1.7244.2.101.115.10
Enable or disable the VTP V2 mode.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVTPMD5Digest 1.3.6.1.4.1.7244.2.101.115.11
The MD5 Digest for the VTP domain status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentVTPConfigLastModified 1.3.6.1.4.1.7244.2.101.115.12
The timestamp of the last configuration modification and the IP address of the switch that caused the configuration change to the database.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentVTPLocalUpdaterID 1.3.6.1.4.1.7244.2.101.115.13
The local updater ID for the VTP domain status.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentVTPPortConfigTable 1.3.6.1.4.1.7244.2.101.115.14
The VTP Trunk status show table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVTPPortConfigEntry

agentVTPPortConfigEntry 1.3.6.1.4.1.7244.2.101.115.14.1
The switch Voice Vlan show entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVTPPortConfigEntry  

agentVTPPortConfigIndex 1.3.6.1.4.1.7244.2.101.115.14.1.1
VTP Trunkport Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  Integer32 0..2147483647  

agentVTPPortConfigTrunkMode 1.3.6.1.4.1.7244.2.101.115.14.1.2
The VTP Trunk mode for selected interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentFIPSnoopingGroup 1.3.6.1.4.1.7244.2.101.116
OBJECT IDENTIFIER    

agentFIPSnoopingAdminMode 1.3.6.1.4.1.7244.2.101.116.1
Enable or disable the FIPSnooping feature. The default mode is disable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentFIPSnoopingVlanConfigTable 1.3.6.1.4.1.7244.2.101.116.2
A table of the FIP Snooping Vlan configuration entries.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentFIPSnoopingVlanConfigEntry

agentFIPSnoopingVlanConfigEntry 1.3.6.1.4.1.7244.2.101.116.2.1
Represents entry for a FIP Snooping configurable Vlan.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentFIPSnoopingVlanConfigEntry  

agentFIPSnoopingVlanIndex 1.3.6.1.4.1.7244.2.101.116.2.1.1
VlanIndex values in the vlans.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentFIPSnoopingVlanAdminMode 1.3.6.1.4.1.7244.2.101.116.2.1.2
This enables or disables FIP Snooping on a selected Vlan interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

agentFIPSnoopingSessionTable 1.3.6.1.4.1.7244.2.101.116.5
A table that contains the objects for the with each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentFIPSnoopingSessionEntry

agentFIPSnoopingSessionEntry 1.3.6.1.4.1.7244.2.101.116.5.1
The information for FIP Snooping sessions.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentFIPSnoopingSessionEntry  

agentFIPSnoopingSessionKey 1.3.6.1.4.1.7244.2.101.116.5.1.1
The FIP Snooping Session Key.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentFIPSnoopingSessionIfIndex 1.3.6.1.4.1.7244.2.101.116.5.1.2
Name of the interface which is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingSessionFCFMacAddress 1.3.6.1.4.1.7244.2.101.116.5.1.3
The FCF MAC address of the session.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentFIPSnoopingSessionENodeMacAddress 1.3.6.1.4.1.7244.2.101.116.5.1.4
The ENode MAC address of the session.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentFIPSnoopingSessionENodeIfIndex 1.3.6.1.4.1.7244.2.101.116.5.1.5
The ENode interface of the session.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingFCFTable 1.3.6.1.4.1.7244.2.101.116.6
A table that contains the objects for the with each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentFIPSnoopingFCFEntry

agentFIPSnoopingFCFEntry 1.3.6.1.4.1.7244.2.101.116.6.1
The information for FIP Snooping FCF.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentFIPSnoopingFCFEntry  

agentFIPSnoopingFCFKey 1.3.6.1.4.1.7244.2.101.116.6.1.1
The FIP Snooping FCF Key.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentFIPSnoopingFCFIfIndex 1.3.6.1.4.1.7244.2.101.116.6.1.2
Name of the interface to which the FCoE Forwarder (FCF) is connected.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingFCFVlan 1.3.6.1.4.1.7244.2.101.116.6.1.3
Vlan Index for which this entry is associated with.
Status: current Access: read-only
OBJECT-TYPE    
  VlanIndex  

agentFIPSnoopingFCFENodeNumber 1.3.6.1.4.1.7244.2.101.116.6.1.4
Total number of ENodes that are connected to the FCF
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingFCFFCMap 1.3.6.1.4.1.7244.2.101.116.6.1.5
FC-Map value used by the FCF. The default value is 0xEFC00.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingFCFSwitchName 1.3.6.1.4.1.7244.2.101.116.6.1.6
Name ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentFIPSnoopingFCFFabricName 1.3.6.1.4.1.7244.2.101.116.6.1.7
Name of the FCF.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentFIPSnoopingENodeTable 1.3.6.1.4.1.7244.2.101.116.7
A table that contains the objects for the with each port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentFIPSnoopingENodeEntry

agentFIPSnoopingENodeEntry 1.3.6.1.4.1.7244.2.101.116.7.1
The information for FIP Snooping ENode.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentFIPSnoopingENodeEntry  

agentFIPSnoopingENodeKey 1.3.6.1.4.1.7244.2.101.116.7.1.1
The FIP Snooping ENode Key.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentFIPSnoopingENodeIfIndex 1.3.6.1.4.1.7244.2.101.116.7.1.2
The interface of enode.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

agentFIPSnoopingENodeVlan 1.3.6.1.4.1.7244.2.101.116.7.1.3
Vlan Index for which this entry is associated with.
Status: current Access: read-only
OBJECT-TYPE    
  VlanIndex  

agentFIPSnoopingENodeNameID 1.3.6.1.4.1.7244.2.101.116.7.1.4
Name ID
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentMLAGGroup 1.3.6.1.4.1.7244.2.101.117
OBJECT IDENTIFIER    

agentMLAGAdminMode 1.3.6.1.4.1.7244.2.101.117.1
Enable or disable the MLAG feature. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentMLAGDomainId 1.3.6.1.4.1.7244.2.101.117.2
Configure the domain Id of Multi-Chassis Link Aggregation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..1000  

agentMLAGConfigurationConsistancyStatus 1.3.6.1.4.1.7244.2.101.117.3
Check the switch configuration for consistency parameter.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), failure(2)  

agentMLAGMemberCount 1.3.6.1.4.1.7244.2.101.117.4
Get the number of MLAG members.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..2147483647  

agentMLAGSystemMac 1.3.6.1.4.1.7244.2.101.117.5
Set the system mac of Multi-Chassis Link Aggregation.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

agentMLAGKeepaliveTimeout 1.3.6.1.4.1.7244.2.101.117.6
To specify the timeout (in seconds) between re-transmissions to the MLAG peer device. The range is from 3 to 20. The default is 5.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 5..600  

agentMLAGPeerGatewayMode 1.3.6.1.4.1.7244.2.101.117.7
Enable or disable Layer 3 forwarding for packets destined to the gateway MAC address of the MLAG. The default mode is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentMLAGDelayRestore 1.3.6.1.4.1.7244.2.101.117.8
To delay the MLAG from coming up on the restored MLAG peer device after a reload when the peer adjacency is already established. The default value is 0, it means that there is no delay time. The range of delay time is from 5 to 600 seconds.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..600  

agentMLAGMemberLinkdownMode 1.3.6.1.4.1.7244.2.101.117.9
Enable or disable member port link down mode when MLAG is starting or stopping. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentMLAGPeerLinkGroup 1.3.6.1.4.1.7244.2.101.117.10
OBJECT IDENTIFIER    

agentMLAGPeerLinkifIndex 1.3.6.1.4.1.7244.2.101.117.10.1
Use this to set MLAG peer link interface. Set 0 to disable MLAG peer link.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

agentMLAGPeerLinkifStatus 1.3.6.1.4.1.7244.2.101.117.10.2
Show MLAG peer link interface status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

agentMLAGPeerLinkActiveVlans 1.3.6.1.4.1.7244.2.101.117.10.3
Show MLAG peer link interface active vlans.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentMLAGPeerLinkForbiddenVlans 1.3.6.1.4.1.7244.2.101.117.10.4
Show MLAG peer link interface forbidden vlans.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentMLAGPortChannelTable 1.3.6.1.4.1.7244.2.101.117.11
Table of Multi-Chassis Link Aggregation port channel status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentMLAGPortChannelEntry

agentMLAGPortChannelEntry 1.3.6.1.4.1.7244.2.101.117.11.1
Table of Multi-Chassis Link Aggregation port channel status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentMLAGPortChannelEntry  

agentMLAGPortChannelifIndex 1.3.6.1.4.1.7244.2.101.117.11.1.1
This is a unique index for an entry in the agentMLAGPortChannelTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

agentMLAGPortChannelId 1.3.6.1.4.1.7244.2.101.117.11.1.2
Identity of MLAG port channel number. Zero to disable MLAG mode.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..4096  

agentMLAGPortChannelifIndexStatus 1.3.6.1.4.1.7244.2.101.117.11.1.3
Interface status of MLAG port channel number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER up(1), down(2)  

agentMLAGPortChannelConsistancy 1.3.6.1.4.1.7244.2.101.117.11.1.4
Configuration consistancy of MLAG port channel number.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER success(1), failure(2)  

agentMLAGPortChannelActiveVlans 1.3.6.1.4.1.7244.2.101.117.11.1.5
Active vlans of MLAG port channel number.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentMLAGVlanRoutingPortTable 1.3.6.1.4.1.7244.2.101.117.12
Table of Multi-Chassis Link Aggregation Forbidden Configuration for the specified vlan routing interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentMLAGVlanRoutingPortEntry

agentMLAGVlanRoutingPortEntry 1.3.6.1.4.1.7244.2.101.117.12.1
Table of Multi-Chassis Link Aggregation Forbidden Configuration for the specified vlan routing interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentMLAGVlanRoutingPortEntry  

agentMLAGVlanRoutingPortifIndex 1.3.6.1.4.1.7244.2.101.117.12.1.1
This is a unique index for an entry in the agentMLAGVlanRoutingPortTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

agentMLAGVlanRoutingPortForbiddenMode 1.3.6.1.4.1.7244.2.101.117.12.1.2
Enable or disable forbidden mode of VLAN on peer link interface. The default mode is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDCBXGroup 1.3.6.1.4.1.7244.2.101.118
OBJECT IDENTIFIER    

agentDCBXConfigTable 1.3.6.1.4.1.7244.2.101.118.1
Table of Data center bridging exchange configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDCBXConfigEntry

agentDCBXConfigEntry 1.3.6.1.4.1.7244.2.101.118.1.1
Table of Data center bridging exchange configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDCBXConfigEntry  

agentDCBXifIndex 1.3.6.1.4.1.7244.2.101.118.1.1.1
This is a unique index for an entry in the agentDCBXPFCConfigTable. A non-zero value indicates the ifIndex for the corresponding interface entry in the ifTable.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

agentDCBXAdminMode 1.3.6.1.4.1.7244.2.101.118.1.1.2
Enable/Disable DCBX for the specified interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentDCBXVersion 1.3.6.1.4.1.7244.2.101.118.1.1.3
Configure DCBX version for the specified interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER cee(1), ieee(2), auto(3)  

agentDCBXPFCConfigTable 1.3.6.1.4.1.7244.2.101.118.2
Table of Data center bridging exchange configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDCBXPFCConfigEntry

agentDCBXPFCConfigEntry 1.3.6.1.4.1.7244.2.101.118.2.1
Table of Data center bridging exchange configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDCBXPFCConfigEntry  

agentDCBXPFCEnableMode 1.3.6.1.4.1.7244.2.101.118.2.1.1
Show the enable mode setting for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCAdvertiseMode 1.3.6.1.4.1.7244.2.101.118.2.1.2
Configure advertise mode setting for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCWillingMode 1.3.6.1.4.1.7244.2.101.118.2.1.3
Configure willing mode setting for DCBX PFC feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCPriorityMask 1.3.6.1.4.1.7244.2.101.118.2.1.4
Show the priority mask for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.2.1.5
Show the max traffic class for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCOperVersion 1.3.6.1.4.1.7244.2.101.118.2.1.6
Show the version for Operational DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCOperMaxVersion 1.3.6.1.4.1.7244.2.101.118.2.1.7
Show the max version for Operational DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCOperErrors 1.3.6.1.4.1.7244.2.101.118.2.1.8
Shows error reason for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPFCOperMode 1.3.6.1.4.1.7244.2.101.118.2.1.9
Show the operational mode for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCOperPeerSyncd 1.3.6.1.4.1.7244.2.101.118.2.1.10
Show feature sync for Operational DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCOperPriorityMask 1.3.6.1.4.1.7244.2.101.118.2.1.11
Show the priority mask for Operational DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCOperMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.2.1.12
Show the max traffic class for Operational DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCPeerLocalifIndex 1.3.6.1.4.1.7244.2.101.118.2.1.13
Show the local interface for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  InterfaceIndex  

agentDCBXPFCPeerStatus 1.3.6.1.4.1.7244.2.101.118.2.1.14
Show the status for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notpresent(0), successful(1), unsuccessful(2)  

agentDCBXPFCPeerEnableMode 1.3.6.1.4.1.7244.2.101.118.2.1.15
Show administrative mode setting for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCPeerWillingMode 1.3.6.1.4.1.7244.2.101.118.2.1.16
Show willing mode setting for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPFCPeerPriorityMask 1.3.6.1.4.1.7244.2.101.118.2.1.17
Show priority mask for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCPeerMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.2.1.18
Show the max traffic class for Peer DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPFCDCBXOperVersion 1.3.6.1.4.1.7244.2.101.118.2.1.19
Show the operational version for DCBX PFC feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cee(1), ieee(2)  

agentDCBXPgConfigTable 1.3.6.1.4.1.7244.2.101.118.3
Table of Data center bridging exchange Priority Group feature configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDCBXPgConfigEntry

agentDCBXPgConfigEntry 1.3.6.1.4.1.7244.2.101.118.3.1
Table of Data center bridging exchange Priority Group feature configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDCBXPgConfigEntry  

agentDCBXPgEnableMode 1.3.6.1.4.1.7244.2.101.118.3.1.1
Show enable mode setting for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgAdvertiseMode 1.3.6.1.4.1.7244.2.101.118.3.1.2
Enable/Disable advertise mode setting for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgWillingMode 1.3.6.1.4.1.7244.2.101.118.3.1.3
Enable/Disable willing mode setting for DCBX Priority Group feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgGroupBandwidth 1.3.6.1.4.1.7244.2.101.118.3.1.4
Show a 8 byte array which will be filled with bandwidth of 8 priority group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgPriorityGroupId 1.3.6.1.4.1.7244.2.101.118.3.1.5
Show priority map for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.3.1.6
Show the max traffic class for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPgOperVersion 1.3.6.1.4.1.7244.2.101.118.3.1.7
Show opertional version for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPgMaxVersion 1.3.6.1.4.1.7244.2.101.118.3.1.8
Show max version for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPgErrorReason 1.3.6.1.4.1.7244.2.101.118.3.1.9
Show error reason for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgIsOperational 1.3.6.1.4.1.7244.2.101.118.3.1.10
Show the operational mode of the PG for a interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgSyncedMode 1.3.6.1.4.1.7244.2.101.118.3.1.11
Show feature sync for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgOperGroupBandwidth 1.3.6.1.4.1.7244.2.101.118.3.1.12
Show a 8 byte array which will be filled with bandwidth of 8 priority group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgOperPriorityGroupId 1.3.6.1.4.1.7244.2.101.118.3.1.13
Show the operational priority map of the PG for a interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgOperMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.3.1.14
Show the max traffic class for Operational DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPgPeerStatus 1.3.6.1.4.1.7244.2.101.118.3.1.15
Show status (Error bit) for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER notpresent(0), successful(1), unsuccessful(2)  

agentDCBXPgPeerEnableMode 1.3.6.1.4.1.7244.2.101.118.3.1.16
Show enable mode setting for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgPeerWillingMode 1.3.6.1.4.1.7244.2.101.118.3.1.17
Show willing mode setting for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER true(1), false(2)  

agentDCBXPgPeerGroupBandwidth 1.3.6.1.4.1.7244.2.101.118.3.1.18
Show a 8 byte array which will be filled with bandwidth of 8 priority group.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgPeerPriorityGroupId 1.3.6.1.4.1.7244.2.101.118.3.1.19
Show priority map for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentDCBXPgPeerMaxTrafficClass 1.3.6.1.4.1.7244.2.101.118.3.1.20
Show the max traffic class for Peer DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32 0..255  

agentDCBXPgDCBXOperVersion 1.3.6.1.4.1.7244.2.101.118.3.1.21
Show the operational version for DCBX Priority Group feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER cee(1), ieee(2)  

agentEvbGroup 1.3.6.1.4.1.7244.2.101.119
OBJECT IDENTIFIER    

agentEvbConfigTable 1.3.6.1.4.1.7244.2.101.119.1
Table of Edge Virtual Bridging feature configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentEvbConfigEntry

agentEvbConfigEntry 1.3.6.1.4.1.7244.2.101.119.1.1
Table of Edge Virtual Bridging feature configurations for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentEvbConfigEntry  

agentEvbifIndex 1.3.6.1.4.1.7244.2.101.119.1.1.1
Show interface index for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..53  

agentEvbAdminMode 1.3.6.1.4.1.7244.2.101.119.1.1.2
Enable/disable mode setting for Evb feature.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentEvbCapability 1.3.6.1.4.1.7244.2.101.119.1.1.3
Configure capabilities for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeEvbTLVTC  

agentEvbForwardingMode 1.3.6.1.4.1.7244.2.101.119.1.1.4
Configure forwarding mode for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeEvbTLVTC  

agentEvbRetransmissionExp 1.3.6.1.4.1.7244.2.101.119.1.1.5
Configure RTE for Evb feature.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentEvbOperCapability 1.3.6.1.4.1.7244.2.101.119.1.1.6
Show current capabilities for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeEvbTLVTC  

agentEvbOperForwardingMode 1.3.6.1.4.1.7244.2.101.119.1.1.7
Show forwarding mode for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  BridgeEvbTLVTC  

agentEvbOperRetransmissionExp 1.3.6.1.4.1.7244.2.101.119.1.1.8
Show RTE for Evb feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentEvbVsiGroup 1.3.6.1.4.1.7244.2.101.119.2
OBJECT IDENTIFIER    

agentEvbVsiTable 1.3.6.1.4.1.7244.2.101.119.2.1
Table of Edge Virtual Bridging VSI feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentEvbVsiEntry

agentEvbVsiEntry 1.3.6.1.4.1.7244.2.101.119.2.1.1
Table of Edge Virtual Bridging VSI feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentEvbVsiEntry  

agentEvbVsiInstanceId 1.3.6.1.4.1.7244.2.101.119.2.1.1.1
Show interface instance id for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(16)  

agentEvbVsiMgrId 1.3.6.1.4.1.7244.2.101.119.2.1.1.2
Show interface mgr id for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentEvbVsiId 1.3.6.1.4.1.7244.2.101.119.2.1.1.3
Show id for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentEvbVsiVersion 1.3.6.1.4.1.7244.2.101.119.2.1.1.4
Show interface version for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentEvbVsiMode 1.3.6.1.4.1.7244.2.101.119.2.1.1.5
Show interface mode for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER preassociate(1), preassocerr(2), associate(3), deassociate(4)  

agentEvbVsiState 1.3.6.1.4.1.7244.2.101.119.2.1.1.6
Show interface state for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unassociated(1), assocprocessing(2), associated(3), preassocprocessing(4), preassociated(5), deassocprocessing(6), exit(7)  

agentEvbVsiNumMacs 1.3.6.1.4.1.7244.2.101.119.2.1.1.7
Show interface number of Macs for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentEvbVsiMacTable 1.3.6.1.4.1.7244.2.101.119.2.2
Table of Edge Virtual Bridging VSI Mac feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentEvbVsiMacEntry

agentEvbVsiMacEntry 1.3.6.1.4.1.7244.2.101.119.2.2.1
Table of Edge Virtual Bridging VSI Mac feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentEvbVsiMacEntry  

agentEvbVsiMacAddress 1.3.6.1.4.1.7244.2.101.119.2.2.1.1
Show interface MacAddress for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentEvbVsiVlanId 1.3.6.1.4.1.7244.2.101.119.2.2.1.2
Show interface VlanId for Evb Vsi feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..4093  

agentVMTracerGroup 1.3.6.1.4.1.7244.2.101.120
OBJECT IDENTIFIER    

agentVMTracerIfCtlTable 1.3.6.1.4.1.7244.2.101.120.1
Table of VM Tracer feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVMTracerIfCtlEntry

agentVMTracerIfCtlEntry 1.3.6.1.4.1.7244.2.101.120.1.1
Table of VM Tracer feature status for the specified interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVMTracerIfCtlEntry  

agentVMTracerIfIndex 1.3.6.1.4.1.7244.2.101.120.1.1.1
Show interface index for VM Tracer feature.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agentVMTracerAdminMode 1.3.6.1.4.1.7244.2.101.120.1.1.2
Enable/Disable VM Tracer mode for specified interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVMTracerSessionTable 1.3.6.1.4.1.7244.2.101.120.2
Table of VM Tracer feature session.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVMTracerSessionEntry

agentVMTracerSessionEntry 1.3.6.1.4.1.7244.2.101.120.2.1
Table of VM Tracer feature session.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVMTracerSessionEntry  

agentVMTracerSessionIndex 1.3.6.1.4.1.7244.2.101.120.2.1.1
Index of VM Tracer feature session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 0..3  

agentVMTracerSessionName 1.3.6.1.4.1.7244.2.101.120.2.1.2
Name of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentVMTracerSessionUrl 1.3.6.1.4.1.7244.2.101.120.2.1.3
Url of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..64)  

agentVMTracerSessionUsername 1.3.6.1.4.1.7244.2.101.120.2.1.4
Username of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentVMTracerSessionPassword 1.3.6.1.4.1.7244.2.101.120.2.1.5
Password of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..32)  

agentVMTracerSessionAutoVlanMode 1.3.6.1.4.1.7244.2.101.120.2.1.6
AutoVlan mode of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentVMTracerSessionAllowVlan 1.3.6.1.4.1.7244.2.101.120.2.1.7
Allow vlan range of VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  VlanList  

agentVMTracerSessionConnectionStatus 1.3.6.1.4.1.7244.2.101.120.2.1.8
Connection status of VM Tracer feature session.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

agentVMTracerSessionClear 1.3.6.1.4.1.7244.2.101.120.2.1.9
Clear current VM Tracer feature session.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER clear(1)  

agentVMTracerVMTable 1.3.6.1.4.1.7244.2.101.120.3
Table of VM Tracer feature vm.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentVMTracerVMEntry

agentVMTracerVMEntry 1.3.6.1.4.1.7244.2.101.120.3.1
Table of VM Tracer feature vm.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentVMTracerVMEntry  

agentVMTracerVMIndex 1.3.6.1.4.1.7244.2.101.120.3.1.1
Index of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER 1..65535  

agentVMTracerVMName 1.3.6.1.4.1.7244.2.101.120.3.1.2
Name of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMInterface 1.3.6.1.4.1.7244.2.101.120.3.1.3
Interface of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMAdapter 1.3.6.1.4.1.7244.2.101.120.3.1.4
Adapter of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMMacAddress 1.3.6.1.4.1.7244.2.101.120.3.1.5
MacAddress of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMPortGroup 1.3.6.1.4.1.7244.2.101.120.3.1.6
PortGroup of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMVlanId 1.3.6.1.4.1.7244.2.101.120.3.1.7
VlanId of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentVMTracerVMSwitch 1.3.6.1.4.1.7244.2.101.120.3.1.8
Switch of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHost 1.3.6.1.4.1.7244.2.101.120.3.1.9
Host of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHostCpuSpeed 1.3.6.1.4.1.7244.2.101.120.3.1.10
Host Cpu Speed of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHostMemory 1.3.6.1.4.1.7244.2.101.120.3.1.11
Host Memory of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHostSystem 1.3.6.1.4.1.7244.2.101.120.3.1.12
Host System of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHostVendor 1.3.6.1.4.1.7244.2.101.120.3.1.13
Host Vendor of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentVMTracerVMHostCpuCores 1.3.6.1.4.1.7244.2.101.120.3.1.14
Host Cpu Cores of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentVMTracerVMHostCpuPackages 1.3.6.1.4.1.7244.2.101.120.3.1.15
Host Cpu Packages of VM Tracer feature vm.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor