SW-DES3x50-ACLMGMT-MIB

File: SW-DES3x50-ACLMGMT-MIB.mib (41592 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	RFC1213-MIB
SNMP-FRAMEWORK-MIB	Q-BRIDGE-MIB	DLINK-ID-REC-MIB

Imported symbols

Counter32	Counter64	TimeTicks
NOTIFICATION-TYPE	MODULE-IDENTITY	OBJECT-TYPE
IpAddress	Unsigned32	MacAddress
RowStatus	DisplayString	SnmpAdminString
PortList	dlink-mgmt

Defined Types

SwACLEthernetEntry
SEQUENCE
	swACLEthernetProfileID	INTEGER
	swACLEthernetUsevlan	INTEGER
	swACLEthernetMacAddrMaskState	INTEGER
	swACLEthernetSrcMacAddrMask	MacAddress
	swACLEthernetDstMacAddrMask	MacAddress
	swACLEthernetUse8021p	INTEGER
	swACLEthernetUseEthernetType	INTEGER
	swACLEthernetPort	PortList
	swACLEthernetRowStatus	RowStatus

SwACLIpEntry
SEQUENCE
	swACLIpProfileID	INTEGER
	swACLIpUsevlan	INTEGER
	swACLIpIpAddrMaskState	INTEGER
	swACLIpSrcIpAddrMask	IpAddress
	swACLIpDstIpAddrMask	IpAddress
	swACLIpUseDSCP	INTEGER
	swACLIpUseProtoType	INTEGER
	swACLIpIcmpOption	INTEGER
	swACLIpIgmpOption	INTEGER
	swACLIpTcpOption	INTEGER
	swACLIpUdpOption	INTEGER
	swACLIpTCPorUDPSrcPortMask	OCTET STRING
	swACLIpTCPorUDPDstPortMask	OCTET STRING
	swACLIpTCPFlagBit	INTEGER
	swACLIpProtoIDOption	INTEGER
	swACLIpProtoIDMask	OCTET STRING
	swACLIpPort	PortList
	swACLIpRowStatus	RowStatus

SwACLPayloadEntry
SEQUENCE
	swACLPayloadProfileID	INTEGER
	swACLPayloadOffSet0to15	OCTET STRING
	swACLPayloadOffSet16to31	OCTET STRING
	swACLPayloadOffSet32to47	OCTET STRING
	swACLPayloadOffSet48to63	OCTET STRING
	swACLPayloadOffSet64to79	OCTET STRING
	swACLPayloadPort	PortList
	swACLPayloadRowStatus	RowStatus

SwACLEtherRuleEntry
SEQUENCE
	swACLEtherRuleProfileID	INTEGER
	swACLEtherRuleAccessID	INTEGER
	swACLEtherRuleVlan	SnmpAdminString
	swACLEtherRuleSrcMacAddress	MacAddress
	swACLEtherRuleDstMacAddress	MacAddress
	swACLEtherRule8021P	INTEGER
	swACLEtherRuleEtherType	OCTET STRING
	swACLEtherRuleEnablePriority	INTEGER
	swACLEtherRulePriority	INTEGER
	swACLEtherRuleReplacePriority	INTEGER
	swACLEtherRuleEnableReplaceDscp	INTEGER
	swACLEtherRuleRepDscp	INTEGER
	swACLEtherRulePermit	INTEGER
	swACLEtherRuleRowStatus	RowStatus

SwACLIpRuleEntry
SEQUENCE
	swACLIpRuleProfileID	INTEGER
	swACLIpRuleAccessID	INTEGER
	swACLIpRuleVlan	SnmpAdminString
	swACLIpRuleSrcIpaddress	IpAddress
	swACLIpRuleDstIpaddress	IpAddress
	swACLIpRuleDscp	INTEGER
	swACLIpRuleProtocol	INTEGER
	swACLIpRuleType	INTEGER
	swACLIpRuleCode	INTEGER
	swACLIpRuleSrcPort	INTEGER
	swACLIpRuleDstPort	INTEGER
	swACLIpRuleFlagBits	INTEGER
	swACLIpRuleProtoID	INTEGER
	swACLIpRuleUserMask	OCTET STRING
	swACLIpRuleEnablePriority	INTEGER
	swACLIpRulePriority	INTEGER
	swACLIpRuleReplacePriority	INTEGER
	swACLIpRuleEnableReplaceDscp	INTEGER
	swACLIpRuleRepDscp	INTEGER
	swACLIpRulePermit	INTEGER
	swACLIpRuleRowStatus	RowStatus

SwACLPayloadRuleEntry
SEQUENCE
	swACLPayloadRuleProfileID	INTEGER
	swACLPayloadRuleAccessID	INTEGER
	swACLPayloadRuleOffSet0to15	OCTET STRING
	swACLPayloadRuleOffSet16to31	OCTET STRING
	swACLPayloadRuleOffSet32to47	OCTET STRING
	swACLPayloadRuleOffSet48to63	OCTET STRING
	swACLPayloadRuleOffSet64to79	OCTET STRING
	swACLPayloadRuleEnablePriority	INTEGER
	swACLPayloadRulePriority	INTEGER
	swACLPayloadRuleReplacePriority	INTEGER
	swACLPayloadRuleEnableReplaceDscp	INTEGER
	swACLPayloadRuleRepDscp	INTEGER
	swACLPayloadRulePermit	INTEGER
	swACLPayloadRuleRowStatus	RowStatus

Defined Values

swAclMgmtMIB		1.3.6.1.4.1.171.11.5
The Structure of Access Control List Information for the proprietary enterprise.
MODULE-IDENTITY

swAclMaskMgmt		1.3.6.1.4.1.171.11.5.1
OBJECT IDENTIFIER

swAclRuleMgmt		1.3.6.1.4.1.171.11.5.2
OBJECT IDENTIFIER

swACLEthernetTable		1.3.6.1.4.1.171.11.5.1.1
This table contain ACL mask of Ethernet information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's layer 2 part of header the switch will examine. Masks can be entered that will be combined with the values the switch finds in the specified frame header fields.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLEthernetEntry

swACLEthernetEntry		1.3.6.1.4.1.171.11.5.1.1.1
A list of information about ACL of Ethernet.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLEthernetEntry

swACLEthernetProfileID		1.3.6.1.4.1.171.11.5.1.1.1.1
The ID of ACL mask entry ,and is unique in the mask list.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLEthernetUsevlan		1.3.6.1.4.1.171.11.5.1.1.1.2
Specifies that the switch will examine the VLAN part of each packet header.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEthernetMacAddrMaskState		1.3.6.1.4.1.171.11.5.1.1.1.3
This object indicates the status of MAC address mask. other(1) - Neither source MAC address nor destination MAC address are masked. dst-mac-addr(2) - recieved frames's destination MAC address are currently used to be filtered as it meets with the MAC address entry of the table. src-mac-addr(3) - recieved frames's source MAC address are currently used to be filtered as it meets with the MAC address entry of the table. dst-src-mac-addr(4) - recieved frames's destination MAC address or source MAC address are currently used to be filtered as it meets with the MAC address entry of the table.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), dst-mac-addr(2), src-mac-addr(3), dst-src-mac-addr(4)

swACLEthernetSrcMacAddrMask		1.3.6.1.4.1.171.11.5.1.1.1.4
This object Specifies the MAC address mask for the source MAC address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

swACLEthernetDstMacAddrMask		1.3.6.1.4.1.171.11.5.1.1.1.5
This object Specifies the MAC address mask for the destination MAC address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

swACLEthernetUse8021p		1.3.6.1.4.1.171.11.5.1.1.1.6
Specifies if the switch will examine the 802.1p priority value in the frame's header or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEthernetUseEthernetType		1.3.6.1.4.1.171.11.5.1.1.1.7
Specifies if the switch will examine the Ethernet type value in each frame's header or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEthernetPort		1.3.6.1.4.1.171.11.5.1.1.1.8
.
Status: current	Access: read-create
OBJECT-TYPE
	PortList	Size(0..127)

swACLEthernetRowStatus		1.3.6.1.4.1.171.11.5.1.1.1.9
This object indicates the status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swACLIpTable		1.3.6.1.4.1.171.11.5.1.2
This table contain ACL mask of IP information. Access profiles will be created on the switch by row creation and to define which parts of each incoming frame's IP layer part of header the switch will examine. Masks can be entered that will be combined with the values the switch finds in the specified frame header fields.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLIpEntry

swACLIpEntry		1.3.6.1.4.1.171.11.5.1.2.1
A list of information about ACL of IP Layer.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLIpEntry

swACLIpProfileID		1.3.6.1.4.1.171.11.5.1.2.1.1
The ID of ACL mask entry ,and is unique in the mask list.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLIpUsevlan		1.3.6.1.4.1.171.11.5.1.2.1.2
This object indicates if IP layer vlan is examined or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLIpIpAddrMaskState		1.3.6.1.4.1.171.11.5.1.2.1.3
This object indicates the status of IP address mask. other(1) - Neither source IP address nor destination IP address are masked. dst-ip-addr(2) - recieved frames's destination IP address are currently used to be filtered as it meets with the IP address entry of the table. src-ip-addr(3) - recieved frames's source IP address are currently used to be filtered as it meets with the IP address entry of the table. dst-src-ip-addr(4) - recieved frames's destination IP address or source IP address are currently used to be filtered as it meets with the IP address entry of the table.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), dst-ip-addr(2), src-ip-addr(3), dst-src-ip-addr(4)

swACLIpSrcIpAddrMask		1.3.6.1.4.1.171.11.5.1.2.1.4
This object Specifies IP address mask for the source IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

swACLIpDstIpAddrMask		1.3.6.1.4.1.171.11.5.1.2.1.5
This object Specifies the IP address mask for the destination IP address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

swACLIpUseDSCP		1.3.6.1.4.1.171.11.5.1.2.1.6
This object indicates DSCP protocol is is examined or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLIpUseProtoType		1.3.6.1.4.1.171.11.5.1.2.1.7
That object indicates which protocol will be examined.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), icmp(2), igmp(3), tcp(4), udp(5), protocolId(6)

swACLIpIcmpOption		1.3.6.1.4.1.171.11.5.1.2.1.8
This object indicates which fields should be filled in of ICMP. none(1)- two fields are null. type(2)- type field should be filled in. code(3)- code field should be filled in. type-code(4)- not only type fileld but code field should be filled in.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	none(1), type(2), code(3), type-code(4)

swACLIpIgmpOption		1.3.6.1.4.1.171.11.5.1.2.1.9
This object indicates Options of IGMP is examined or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

swACLIpTcpOption		1.3.6.1.4.1.171.11.5.1.2.1.10
This object indicates the status of filtered address of TCP. other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be filtered . src-addr(3) - recieved frames's source port are currently used to be filtered . dst-src-addr(4) - both recieved frames's destination port and source port are currently used to be filtered .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), dst-addr(2), src-addr(3), dst-src-addr(4)

swACLIpUdpOption		1.3.6.1.4.1.171.11.5.1.2.1.11
This object indicates the status of filtered address of UDP . other(1) - Neither source port nor destination port are masked. dst-addr(2) - recieved frames's destination port are currently used to be filtered . src-addr(3) - recieved frames's source port are currently used to be filtered . dst-src-addr(4) - recieved frames's destination port or source port are currently used to be filtered.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	other(1), dst-addr(2), src-addr(3), dst-src-addr(4)

swACLIpTCPorUDPSrcPortMask		1.3.6.1.4.1.171.11.5.1.2.1.12
Specifies a TCP port mask for the source port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

swACLIpTCPorUDPDstPortMask		1.3.6.1.4.1.171.11.5.1.2.1.13
Specifies a TCP port mask for the destination port if swACLIpUseProtoType is TCP Specifies a UDP port mask for the destination port if swACLIpUseProtoType is UDP.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

swACLIpTCPFlagBit		1.3.6.1.4.1.171.11.5.1.2.1.14
Specifies a TCP connection flag mask.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLIpProtoIDOption		1.3.6.1.4.1.171.11.5.1.2.1.15
Specifies that the switch will examine each frame's Protocol ID field or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enable(1), disable(2)

swACLIpProtoIDMask		1.3.6.1.4.1.171.11.5.1.2.1.16
Specifies that the rule applies to the IP protocol ID and the mask options behind the IP header.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4)

swACLIpPort		1.3.6.1.4.1.171.11.5.1.2.1.17
.
Status: current	Access: read-create
OBJECT-TYPE
	PortList	Size(0..127)

swACLIpRowStatus		1.3.6.1.4.1.171.11.5.1.2.1.18
This object indicates the status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swACLPayloadTable		1.3.6.1.4.1.171.11.5.1.3
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLPayloadEntry

swACLPayloadEntry		1.3.6.1.4.1.171.11.5.1.3.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLPayloadEntry

swACLPayloadProfileID		1.3.6.1.4.1.171.11.5.1.3.1.1
.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLPayloadOffSet0to15		1.3.6.1.4.1.171.11.5.1.3.1.2
.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadOffSet16to31		1.3.6.1.4.1.171.11.5.1.3.1.3
.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadOffSet32to47		1.3.6.1.4.1.171.11.5.1.3.1.4
.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadOffSet48to63		1.3.6.1.4.1.171.11.5.1.3.1.5
.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadOffSet64to79		1.3.6.1.4.1.171.11.5.1.3.1.6
.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadPort		1.3.6.1.4.1.171.11.5.1.3.1.7
.
Status: current	Access: read-create
OBJECT-TYPE
	PortList	Size(0..127)

swACLPayloadRowStatus		1.3.6.1.4.1.171.11.5.1.3.1.8
.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swACLEtherRuleTable		1.3.6.1.4.1.171.11.5.2.1
This table contain ACL rule of ethernet information.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLEtherRuleEntry

swACLEtherRuleEntry		1.3.6.1.4.1.171.11.5.2.1.1
A list of information about ACL rule of the layer 2 part of each packet.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLEtherRuleEntry

swACLEtherRuleProfileID		1.3.6.1.4.1.171.11.5.2.1.1.1
The ID of ACL mask entry ,and is unique in the mask list.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLEtherRuleAccessID		1.3.6.1.4.1.171.11.5.2.1.1.2
The ID of ACL rule entry relate to swACLEtherRuleProfileID.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLEtherRuleVlan		1.3.6.1.4.1.171.11.5.2.1.1.3
Specifies that the access will apply to only to this VLAN.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

swACLEtherRuleSrcMacAddress		1.3.6.1.4.1.171.11.5.2.1.1.4
Specifies that the access will apply to only packets with this source MAC address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

swACLEtherRuleDstMacAddress		1.3.6.1.4.1.171.11.5.2.1.1.5
Specifies that the access will apply to only packets with this destination MAC address.
Status: current	Access: read-create
OBJECT-TYPE
	MacAddress

swACLEtherRule8021P		1.3.6.1.4.1.171.11.5.2.1.1.6
Specifies that the access will apply only to packets with this 802.1p priority value.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

swACLEtherRuleEtherType		1.3.6.1.4.1.171.11.5.2.1.1.7
Specifies that the access will apply only to packets with this hexidecimal 802.1Q Ethernet type value in the packet header.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(2)

swACLEtherRuleEnablePriority		1.3.6.1.4.1.171.11.5.2.1.1.8
Specifies that the access will apply only to packets with priority value.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEtherRulePriority		1.3.6.1.4.1.171.11.5.2.1.1.9
Specific the priority will change to the packets while the swACLEtherRuleReplacePriority is enabled .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

swACLEtherRuleReplacePriority		1.3.6.1.4.1.171.11.5.2.1.1.10
Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEtherRuleEnableReplaceDscp		1.3.6.1.4.1.171.11.5.2.1.1.11
Specific the packets that match the access profile will replaced the DSCP field by the switch or not .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLEtherRuleRepDscp		1.3.6.1.4.1.171.11.5.2.1.1.12
specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLEtherRulePermit		1.3.6.1.4.1.171.11.5.2.1.1.13
This object indicates resoult of examination is permit or deny;default is permit(1) permit - Specifies that packets that match the access profile are permitted to be forwarded by the switch. deny - Specifies that packets that do not match the access profile are not permitted to be forwarded by the switch and will be filtered.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

swACLEtherRuleRowStatus		1.3.6.1.4.1.171.11.5.2.1.1.14
This object indicates the status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swACLIpRuleTable		1.3.6.1.4.1.171.11.5.2.2
.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLIpRuleEntry

swACLIpRuleEntry		1.3.6.1.4.1.171.11.5.2.2.1
.
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLIpRuleEntry

swACLIpRuleProfileID		1.3.6.1.4.1.171.11.5.2.2.1.1
The ID of ACL mask entry ,and is unique in the mask list.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLIpRuleAccessID		1.3.6.1.4.1.171.11.5.2.2.1.2
The ID of ACL IP rule entry .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLIpRuleVlan		1.3.6.1.4.1.171.11.5.2.2.1.3
Specifies that the access will apply to only to this VLAN.
Status: current	Access: read-create
OBJECT-TYPE
	SnmpAdminString	Size(1..32)

swACLIpRuleSrcIpaddress		1.3.6.1.4.1.171.11.5.2.2.1.4
Specific an IP source address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

swACLIpRuleDstIpaddress		1.3.6.1.4.1.171.11.5.2.2.1.5
Specific an IP destination address.
Status: current	Access: read-create
OBJECT-TYPE
	IpAddress

swACLIpRuleDscp		1.3.6.1.4.1.171.11.5.2.2.1.6
Specific the value of dscp, the value can be configured 0 to 63
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLIpRuleProtocol		1.3.6.1.4.1.171.11.5.2.2.1.7
Specifies the IP protocol which has been configured in swACLIpEntry .
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), icmp(2), igmp(3), tcp(4), udp(5), protocolId(6)

swACLIpRuleType		1.3.6.1.4.1.171.11.5.2.2.1.8
Specific that the rule applies to the value of icmp type traffic.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

swACLIpRuleCode		1.3.6.1.4.1.171.11.5.2.2.1.9
Specific that the rule applies to the value of icmp code traffic.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

swACLIpRuleSrcPort		1.3.6.1.4.1.171.11.5.2.2.1.10
Specific that the rule applies the range of tcp/udp source port
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

swACLIpRuleDstPort		1.3.6.1.4.1.171.11.5.2.2.1.11
Specific the range of tcp/udp destination port range
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..65535

swACLIpRuleFlagBits		1.3.6.1.4.1.171.11.5.2.2.1.12
A value which indicates the set of TCP flags that this entity may potentially offers. The value is a sum. This sum initially takes the value zero, Then, for each flag, L, in the range 1 through 6, that this node performs transactions for, 2 raised to (L - 1) is added to the sum. Note that values should be calculated accordingly: Flag functionality 6 urg bit 5 ack bit 4 rsh bit 3 rst bit 2 syn bit 1 fin bit For example,it you want to enable urg bit and ack bit,you should set vlaue 48(2^(5-1) + 2^(6-1)).
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLIpRuleProtoID		1.3.6.1.4.1.171.11.5.2.2.1.13
Specific that the rule applies to the value of ip protocol id traffic
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..255

swACLIpRuleUserMask		1.3.6.1.4.1.171.11.5.2.2.1.14
Specific that the rule applies to the ip protocol id and the range of options behind the IP header.
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(4)

swACLIpRuleEnablePriority		1.3.6.1.4.1.171.11.5.2.2.1.15
Specifies that the access will apply only to packets with priority value.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLIpRulePriority		1.3.6.1.4.1.171.11.5.2.2.1.16
Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

swACLIpRuleReplacePriority		1.3.6.1.4.1.171.11.5.2.2.1.17
Specific the packets that match the access profile will changed the 802.1p priority tag field by the switch or not .
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLIpRuleEnableReplaceDscp		1.3.6.1.4.1.171.11.5.2.2.1.18
Indicate weather the DSCP field can be over-write or not.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLIpRuleRepDscp		1.3.6.1.4.1.171.11.5.2.2.1.19
specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLIpRulePermit		1.3.6.1.4.1.171.11.5.2.2.1.20
This object indicates filter is permit or deny; default is permit(1)
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	deny(1), permit(2)

swACLIpRuleRowStatus		1.3.6.1.4.1.171.11.5.2.2.1.21
This object indicates the status of this entry.
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus

swACLPayloadRuleTable		1.3.6.1.4.1.171.11.5.2.3
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		SwACLPayloadRuleEntry

swACLPayloadRuleEntry		1.3.6.1.4.1.171.11.5.2.3.1
Tok_String
Status: current	Access: not-accessible
OBJECT-TYPE
	SwACLPayloadRuleEntry

swACLPayloadRuleProfileID		1.3.6.1.4.1.171.11.5.2.3.1.1
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLPayloadRuleAccessID		1.3.6.1.4.1.171.11.5.2.3.1.2
Tok_String
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

swACLPayloadRuleOffSet0to15		1.3.6.1.4.1.171.11.5.2.3.1.3
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadRuleOffSet16to31		1.3.6.1.4.1.171.11.5.2.3.1.4
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadRuleOffSet32to47		1.3.6.1.4.1.171.11.5.2.3.1.5
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadRuleOffSet48to63		1.3.6.1.4.1.171.11.5.2.3.1.6
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadRuleOffSet64to79		1.3.6.1.4.1.171.11.5.2.3.1.7
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	OCTET STRING	Size(16)

swACLPayloadRuleEnablePriority		1.3.6.1.4.1.171.11.5.2.3.1.8
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLPayloadRulePriority		1.3.6.1.4.1.171.11.5.2.3.1.9
Specifies that the access profile will apply to packets that contain this value in their 802.1p priority field of their header.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..7

swACLPayloadRuleReplacePriority		1.3.6.1.4.1.171.11.5.2.3.1.10
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLPayloadRuleEnableReplaceDscp		1.3.6.1.4.1.171.11.5.2.3.1.11
Indicate wether the DSCP field can be over-write or not
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	enabled(1), disabled(2)

swACLPayloadRuleRepDscp		1.3.6.1.4.1.171.11.5.2.3.1.12
specify a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in the DSCP field of the packet.
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	0..63

swACLPayloadRulePermit		1.3.6.1.4.1.171.11.5.2.3.1.13
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	INTEGER	permit(1), deny(2)

swACLPayloadRuleRowStatus		1.3.6.1.4.1.171.11.5.2.3.1.14
Tok_String
Status: current	Access: read-create
OBJECT-TYPE
	RowStatus