SPC200
File:
SPC200.mib (149415 bytes)
Imported modules
Imported symbols
Defined Types
| ModulationValue |
|
| Modulation amplitude used by a group of carriers. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
none(1), bpsk(2), qpsk(3), qam16(4), qam64(5), qam256(6) |
|
| PilotValue |
|
| The pilot carrier wave can be chosen between
the carrier 1 up to carrier 128 inside a band carrier range. |
| TEXTUAL-CONVENTION |
|
|
|
| |
Integer32 |
1..128 |
|
| PlcChannelType |
|
| The different type of plc channels:
rx for the current reception channel,
rx last for the last reception channel,
tx for the current transmission channel. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
rx(1), rxLast(2), tx(3) |
|
| EstimationMode |
|
| The type of Channel estimation process. Two are available:
- automatic, the equipment negociates the best configuration
with the remote equipment,
- manual, the operator defines the configuration. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
automatic(1), manual(2) |
|
| ResultValue |
|
| Result value of input vectors. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
success(1), fail(2) |
|
| SoftwareActionResultValue |
|
| Result value of software action process. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
success(0), on-going(1), fileNotExist(2), flashExhausted(3), flashCorrupted(4), notEnoughMemory(5), invalidParameter(6), genericError(7) |
|
| SoftwareActionType |
|
| Type of software management action. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
switch(1), remove(2) |
|
| PlcModeType |
|
| Type of software management action. |
| TEXTUAL-CONVENTION |
|
|
|
| |
INTEGER |
ad-hoc(0), slave(1), master(2) |
|
| PortStatsEntry |
|
| SEQUENCE |
|
|
|
| |
portStatsBandIndex |
BandValue |
|
| |
portStatsGroupIndex |
GroupValue |
|
| |
portStatsCarrierIndex |
CarrierValue |
|
| |
portStatsSignal |
Counter32 |
|
| |
portStatsNoise |
Counter32 |
|
| PortStats2Entry |
|
| SEQUENCE |
|
|
|
| |
portStats2Signal |
OCTET STRING |
|
| |
portStats2Noise |
OCTET STRING |
|
| |
portStats2AvgBandAtt |
Counter32 |
|
| |
portStats2AvgBandSNR |
Counter32 |
|
| PortStats3Entry |
|
| SEQUENCE |
|
|
|
| |
portStats3AvgAtt |
Counter32 |
|
| |
portStats3AvgSNR |
Counter32 |
|
| PlcSNAnalyserEntry |
|
| SEQUENCE |
|
|
|
| |
plcSNAnalyserMinSignal |
OCTET STRING |
|
| |
plcSNAnalyserMaxSignal |
OCTET STRING |
|
| |
plcSNAnalyserAvgSignal |
OCTET STRING |
|
| |
plcSNAnalyserLastSignal |
OCTET STRING |
|
| |
plcSNAnalyserFFTDiv |
Counter32 |
|
| PlcBasePortEntry |
|
| SEQUENCE |
|
|
|
| |
plcBasePortIndex |
MacAddress |
|
| |
plcBasePortAddress |
MacAddress |
|
| |
plcBasePortChannelEstimation |
EstimationMode |
|
| |
plcBasePortAttenuation |
Counter32 |
|
| PlcChannelModulationStringEntry |
|
| SEQUENCE |
|
|
|
| |
plcRxChannelModulation |
OCTET STRING |
|
| |
plcRxLastChannelModulation |
OCTET STRING |
|
| |
plcTxChannelModulation |
OCTET STRING |
|
| PlcPortChannelEntry |
|
| SEQUENCE |
|
|
|
| |
plcPortChannelIndex |
Unsigned32 |
|
| |
plcPortChannelType |
PlcChannelType |
|
| |
plcPortChannelGain |
Integer32 |
|
| |
plcPortChannelBandwidth |
ChannelBandwidthValue |
|
| |
plcPortChannelMaxBandwidth |
ChannelBandwidthValue |
|
| |
plcPortChannelSynchronizationBand |
BandValue |
|
| PlcChannelPilotStringEntry |
|
| SEQUENCE |
|
|
|
| |
plcRxChannelPilots |
OCTET STRING |
|
| |
plcRxLastChannelPilots |
OCTET STRING |
|
| |
plcTxChannelPilots |
OCTET STRING |
|
| PlcChannelPilotsEntry |
|
| SEQUENCE |
|
|
|
| |
plcChannelPilotBandIndex |
BandValue |
|
| |
plcChannelPilot1 |
PilotValue |
|
| |
plcChannePilot2 |
PilotValue |
|
| PlcNodeNotchesEntry |
|
| SEQUENCE |
|
|
|
| |
plcNodeNotchesBandIndex |
BandValue |
|
| |
plcNodeNotchesGroupIndex |
GroupValue |
|
| |
plcNodeNotchesCarrier1 |
TruthValue |
|
| |
plcNodeNotchesCarrier2 |
TruthValue |
|
| |
plcNodeNotchesCarrier3 |
TruthValue |
|
| |
plcNodeNotchesCarrier4 |
TruthValue |
|
| |
plcNodeNotchesCarrier5 |
TruthValue |
|
| |
plcNodeNotchesCarrier6 |
TruthValue |
|
| |
plcNodeNotchesCarrier7 |
TruthValue |
|
| |
plcNodeNotchesCarrier8 |
TruthValue |
|
| PlcNodePilotsEntry |
|
| SEQUENCE |
|
|
|
| |
plcNodePilotsBandIndex |
BandValue |
|
| |
plcNodePilot1 |
PilotValue |
|
| |
plcNodePilot2 |
PilotValue |
|
| PlcNodeAdaptsStringEntry |
|
| SEQUENCE |
|
|
|
| |
plcNodeAdaptsStringBandIndex |
BandValue |
|
| |
plcNodeAdaptsStringBand |
OCTET STRING |
|
| PlcNodeAdaptsEntry |
|
| SEQUENCE |
|
|
|
| |
plcNodeAdaptsBandIndex |
BandValue |
|
| |
plcNodeAdaptsGroupIndex |
GroupValue |
|
| |
plcNodeAdaptsCarrier1 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier2 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier3 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier4 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier5 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier6 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier7 |
AdaptValue |
|
| |
plcNodeAdaptsCarrier8 |
AdaptValue |
|
| PlcNodeNetConfigEntry |
|
| SEQUENCE |
|
|
|
| |
plcNodeIpAddr |
IpAddress |
|
| |
plcNodeNetMask |
IpAddress |
|
| |
plcNodeMacAddr |
MacAddress |
|
| |
plcNodeGateway |
IpAddress |
|
| SoftwareEntry |
|
| SEQUENCE |
|
|
|
| |
softwareIndex |
SoftwareIndex |
|
| |
softwareVersion |
DisplayString |
|
Defined Values
| spc200MIB |
1.3.6.1.4.1.22764.1 |
| Description |
| MODULE-IDENTITY |
|
|
|
| plc |
1.3.6.1.4.1.22764.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| stats |
1.3.6.1.4.1.22764.1.1.1 |
| OBJECT IDENTIFIER |
|
|
|
| portStatsTable |
1.3.6.1.4.1.22764.1.1.1.2 |
| This table gathers all statistic data specific
to SPC200 chip relative to plc connection. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PortStatsEntry |
|
| portStatsEntry |
1.3.6.1.4.1.22764.1.1.1.2.1 |
| This row contains statistic data specific to
SPC200 chip relative to a connection. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PortStatsEntry |
|
|
| portStatsBandIndex |
1.3.6.1.4.1.22764.1.1.1.2.1.1 |
| The band number on which the signal,
noise, ber data are collected. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| portStatsGroupIndex |
1.3.6.1.4.1.22764.1.1.1.2.1.2 |
| The group number on which the signal,
noise, ber data are collected |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GroupValue |
|
|
| portStatsCarrierIndex |
1.3.6.1.4.1.22764.1.1.1.2.1.3 |
| The group number on which the signal,
noise, ber data are collected |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
CarrierValue |
|
|
| portStatsSignal |
1.3.6.1.4.1.22764.1.1.1.2.1.4 |
| The DB value of the signal associated
with the carrier wave entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| portStatsNoise |
1.3.6.1.4.1.22764.1.1.1.2.1.5 |
| The DB value of the noise associated
with the carrier wave entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| portStats2Table |
1.3.6.1.4.1.22764.1.1.1.3 |
| This table gathers all statistic data specific to
SPC200 chip relative to plc channels. This table has
the same information as the portChannelStatsTable
but in a more compact way. This table has been added
to deal with possible slow performances. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PortStats2Entry |
|
| portStats2Entry |
1.3.6.1.4.1.22764.1.1.1.3.1 |
| This row contains statistic data specific to
SPC200 chip relative to a connection. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PortStats2Entry |
|
|
| portStats2Signal |
1.3.6.1.4.1.22764.1.1.1.3.1.1 |
| The values of the signal for all the carrier waves.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is coded on two bytes.
There is one value for each 128 carriers of the
considered band. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| portStats2Noise |
1.3.6.1.4.1.22764.1.1.1.3.1.2 |
| The values of the noise for all the carrier waves.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is coded on two bytes.
There is one value for each 128 carriers of the
considered band. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| portStats3Table |
1.3.6.1.4.1.22764.1.1.1.4 |
| This table gathers all statistic data specific to
SPC200 chip relative to plc channels. This table has
the same information as the portChannelStatsTable
but in a more compact way. This table has been added
to deal with possible slow performances. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PortStats3Entry |
|
| portStats3Entry |
1.3.6.1.4.1.22764.1.1.1.4.1 |
| This row contains statistic data specific to
SPC200 chip relative to a connection. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PortStats3Entry |
|
|
| portStats3AvgAtt |
1.3.6.1.4.1.22764.1.1.1.4.1.1 |
| Average attenuation on the link (dB). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| portStats3AvgSNR |
1.3.6.1.4.1.22764.1.1.1.4.1.2 |
| Average SNR on the link (dB). |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| bootstats |
1.3.6.1.4.1.22764.1.1.1.5 |
| boot statistics |
| Status: current |
Access: read-only |
| OBJECT-IDENTITY |
|
|
|
| plcObjects |
1.3.6.1.4.1.22764.1.1.2 |
| OBJECT IDENTIFIER |
|
|
|
| plcMode |
1.3.6.1.4.1.22764.1.1.2.1 |
| Plc Mode |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
PlcModeType |
|
|
| plcTopo |
1.3.6.1.4.1.22764.1.1.2.2 |
| OBJECT IDENTIFIER |
|
|
|
| plcSNAnalyserEnable |
1.3.6.1.4.1.22764.1.1.2.4.1 |
| true if the modem should turn to spectrum analyser mode.
In this mode the modem enters a receive only mode,
and captures periodic samples of the signal on the powerline.
The spectrum analyser mode shall be disabled for normal
powerline modem operation. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| plcSNAnalyserTable |
1.3.6.1.4.1.22764.1.1.2.4.2 |
| This table gathers all statistic data specific to
SPC200 chip relative to plc analyser. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcSNAnalyserEntry |
|
| plcSNAnalyserEntry |
1.3.6.1.4.1.22764.1.1.2.4.2.1 |
| This row contains statistic data specific to
SPC200 chip relative to a band. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcSNAnalyserEntry |
|
|
| plcSNAnalyserMinSignal |
1.3.6.1.4.1.22764.1.1.2.4.2.1.1 |
| Minimum signal measured over several samples for the
associated carrier wave entry. The value is expressed
in Glomer which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer) - 113 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcSNAnalyserMaxSignal |
1.3.6.1.4.1.22764.1.1.2.4.2.1.2 |
| Maximum signal measured on several samples for the
associated carrier wave entry. The value is expressed
in Glomer which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer) - 113 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcSNAnalyserAvgSignal |
1.3.6.1.4.1.22764.1.1.2.4.2.1.3 |
| Average signal measured on several samples for the
associated carrier wave entry. The value is expressed
in Glomer which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer) - 113 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcSNAnalyserLastSignal |
1.3.6.1.4.1.22764.1.1.2.4.2.1.4 |
| Signal measured for last sample on the associated
carrier wave entry. The value is expressed
in Glomer which can be converted in dBm/Hz using the
following formula: dBm/Hz = 19*log10(Glomer) - 113 |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcSNAnalyserFFTDiv |
1.3.6.1.4.1.22764.1.1.2.4.2.1.5 |
| FFT division factor on the associated band. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| plcSNAnalyserAGC |
1.3.6.1.4.1.22764.1.1.2.4.3 |
| Gain factor in dB, as used by the
Automatic Gain Control last sample |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
0..255 |
|
| plcAGCAnalyserEnable |
1.3.6.1.4.1.22764.1.1.2.5.1 |
| |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
true(1), false(2) |
|
| plcTopoChanges |
1.3.6.1.4.1.22764.1.1.2.2.1 |
| The total number of topology changes detected
by this plc bridge since the management entity
was last reset or initialized. Such changes
concerns only
- the plcBasePortTable rows
- the plcBasePortTable columns
except for plcBasePortChannelEstimation |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
Counter32 |
|
|
| plcBasePortTable |
1.3.6.1.4.1.22764.1.1.2.2.2 |
| This table contains the list of plc remote connection |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcBasePortEntry |
|
| plcBasePortEntry |
1.3.6.1.4.1.22764.1.1.2.2.2.1 |
| This row contains plc remote connection information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcBasePortEntry |
|
|
| plcBasePortIndex |
1.3.6.1.4.1.22764.1.1.2.2.2.1.1 |
| The MAC address of the MAC layer above
the plc interface of the remote PLC equipment. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| plcBasePortAddress |
1.3.6.1.4.1.22764.1.1.2.2.2.1.2 |
| The MAC address of the MAC layer above
the plc interface of the remote PLC equipment. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| plcChannelModulationStringEntry |
1.3.6.1.4.1.22764.1.1.2.2.3.1 |
| This row contains string values for a quick access to
the modulation amplitude configuration
of each active channel of the remote
connection referenced by plcBasePortIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcChannelModulationStringEntry |
|
|
| plcRxChannelModulation |
1.3.6.1.4.1.22764.1.1.2.2.3.1.1 |
| The modulation amplitude values for the Rx channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits.
There are ( 16 groups * 7 bands ) / 2 = 66 values. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcRxLastChannelModulation |
1.3.6.1.4.1.22764.1.1.2.2.3.1.2 |
| The modulation amplitude values for the Rx Last channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits representing ModulationValue - 1.
There are ( 16 groups * 7 bands ) / 2 = 66 values. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcTxChannelModulation |
1.3.6.1.4.1.22764.1.1.2.2.3.1.3 |
| The modulation amplitude values for the Tx channel of
a given remote connection entry.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing two modulation values.
Each modulation is coded on 4 bits.
There are ( 16 groups * 7 bands ) / 2 = 66 values. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcChannelModulationEntry |
1.3.6.1.4.1.22764.1.1.2.2.4.1 |
| This row contains modulation amplitude configuration
of the channel, referenced by the plcPortChannelIndex,
of the remote connection referenced by
plcBasePortIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcChannelModulationEntry |
|
|
| plcModBandIndex |
1.3.6.1.4.1.22764.1.1.2.2.4.1.1 |
| The band number of which the modulations are defined |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| plcModGroup1 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.2 |
| The modulation amplitude of the first group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup2 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.3 |
| The modulation amplitude of the second group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup3 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.4 |
| The modulation amplitude of the third group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup4 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.5 |
| The modulation amplitude of the fourth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup5 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.6 |
| The modulation amplitude of the fifth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup6 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.7 |
| The modulation amplitude of the sixth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup7 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.8 |
| The modulation amplitude of the seventh group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup8 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.9 |
| The modulation amplitude of the eighth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup9 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.10 |
| The modulation amplitude of the nineth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup10 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.11 |
| The modulation amplitude of the tenth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup11 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.12 |
| The modulation amplitude of the eleventh group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup12 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.13 |
| The modulation amplitude of the twelveth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup13 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.14 |
| The modulation amplitude of the thirteenth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup14 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.15 |
| The modulation amplitude of the fourteenth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup15 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.16 |
| The modulation amplitude of the fifteenth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcModGroup16 |
1.3.6.1.4.1.22764.1.1.2.2.4.1.17 |
| The modulation amplitude of the sixteenth group
of the band entry of the channel entry
for a given remote connection entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
ModulationValue |
|
|
| plcPortChannelEntry |
1.3.6.1.4.1.22764.1.1.2.2.6.1 |
| This row contains plc channel information |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcPortChannelEntry |
|
|
| plcPortChannelIndex |
1.3.6.1.4.1.22764.1.1.2.2.6.1.1 |
| The channel number belongs to the remote connection
with plc equipment associated with the
plcBasePortIndex value.
Only three channels are expected.
Index 1 for RX channel
Index 2 for RXLast channel
index 3 for TX channel |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
Unsigned32 |
|
|
| plcPortChannelGain |
1.3.6.1.4.1.22764.1.1.2.2.6.1.3 |
| The gain associated with the channel. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
Integer32 |
|
|
| plcChannelPilotStringEntry |
1.3.6.1.4.1.22764.1.1.2.2.7.1 |
| This row contains a quick access for pilot values ,
of the remote connection referenced by
plcBasePortIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcChannelPilotStringEntry |
|
|
| plcRxChannelPilots |
1.3.6.1.4.1.22764.1.1.2.2.7.1.1 |
| The carrier wave numbers which support
the pilot waves for the Rx Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcRxLastChannelPilots |
1.3.6.1.4.1.22764.1.1.2.2.7.1.2 |
| The carrier wave numbers which support
the pilot waves for the Rx Last Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcTxChannelPilots |
1.3.6.1.4.1.22764.1.1.2.2.7.1.3 |
| The carrier wave numbers which support
the pilot waves for the Tx Channel.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcChannelPilotsEntry |
1.3.6.1.4.1.22764.1.1.2.2.8.1 |
| This row contains the pilots 1 and 2 configuration
for a channel defined by the
couple (plcBasePortIndex, plcPortChannelIndex) |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcChannelPilotsEntry |
|
|
| plcChannelPilotBandIndex |
1.3.6.1.4.1.22764.1.1.2.2.8.1.1 |
| The band number on which the pilots are defined. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| plcChannelPilot1 |
1.3.6.1.4.1.22764.1.1.2.2.8.1.2 |
| The carrier wave number which supports
the first pilot wave for the channel
associated with this entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PilotValue |
|
|
| plcChannePilot2 |
1.3.6.1.4.1.22764.1.1.2.2.8.1.3 |
| The carrier wave number which supports
the second pilot wave for the channel
associated with this entry. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PilotValue |
|
|
| plcNodeNotches |
1.3.6.1.4.1.22764.1.1.2.3.1 |
| The values of the notches for all the node bands.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is an octet representing the 8 notches of
each group. There is one value for each 7 * 16 bands. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcNodeNotchesTable |
1.3.6.1.4.1.22764.1.1.2.3.2 |
| This table contains Notches configuration
for the SPC200 chip. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcNodeNotchesEntry |
|
| plcNodeNotchesEntry |
1.3.6.1.4.1.22764.1.1.2.3.2.1 |
| This row contains Notches configuration for a group.
The group is defined by the couple
(plcNodeNotchesGroupIndex, plcNodeNotchesBandIndex). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcNodeNotchesEntry |
|
|
| plcNodeNotchesBandIndex |
1.3.6.1.4.1.22764.1.1.2.3.2.1.1 |
| The band number on which the notches are defined. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| plcNodeNotchesCarrier1 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.3 |
| Tell if the first carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier2 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.4 |
| Tell if the second carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier3 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.5 |
| Tell if the third carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier4 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.6 |
| Tell if the fourth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier5 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.7 |
| Tell if the fifth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier6 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.8 |
| Tell if the sixth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier7 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.9 |
| Tell if the seventh carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeNotchesCarrier8 |
1.3.6.1.4.1.22764.1.1.2.3.2.1.10 |
| Tell if the eighth carrier of the group entry
of the band entry is a notch carrier.
The true value means the current carrier is a notch. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodePilots |
1.3.6.1.4.1.22764.1.1.2.3.4 |
| The values of the pilot for all the node bands.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is a pair of octets representing the pilot
values. There is one pair (pilot1 pilot2) for each
of the 7 bands. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcNodePilotsTable |
1.3.6.1.4.1.22764.1.1.2.3.5 |
| This table contains pilot values
used by default on all channels. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcNodePilotsEntry |
|
| plcNodePilotsEntry |
1.3.6.1.4.1.22764.1.1.2.3.5.1 |
| This row contains pilot values
used by default on a band.
The band is defined by the index
plcNodePilotsBandIndex. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcNodePilotsEntry |
|
|
| plcNodePilotsBandIndex |
1.3.6.1.4.1.22764.1.1.2.3.5.1.1 |
| The band number on which the pilot values are defined. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| plcNodePilot1 |
1.3.6.1.4.1.22764.1.1.2.3.5.1.2 |
| The default carrier wave number
which supports the first pilot wave. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PilotValue |
|
|
| plcNodePilot2 |
1.3.6.1.4.1.22764.1.1.2.3.5.1.3 |
| The default carrier wave number
which supports the second pilot wave. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
PilotValue |
|
|
| plcNodeAdaptsStringTable |
1.3.6.1.4.1.22764.1.1.2.3.7 |
| This table contains string values for a
quick access to the adapt configurations
of all the carriers. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcNodeAdaptsStringEntry |
|
| plcNodeAdaptsStringEntry |
1.3.6.1.4.1.22764.1.1.2.3.7.1 |
| This row contains string values for a quick access to
the adapt configuration
of each carrier of a band. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcNodeAdaptsStringEntry |
|
|
| plcNodeAdaptsStringBand |
1.3.6.1.4.1.22764.1.1.2.3.7.1.2 |
| The adapt values of the 128 carriers of a band.
The expected format is VALUE VALUE VALUE ... VALUE.
Each value is two octets representing one adapt carrier
level.
There are ( 16 groups * 8 carriers) = 128 values. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
OCTET STRING |
|
|
| plcNodeAdaptsTable |
1.3.6.1.4.1.22764.1.1.2.3.8 |
| This table contains adapt level configuration
for each carrier of the node. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
PlcNodeAdaptsEntry |
|
| plcNodeAdaptsEntry |
1.3.6.1.4.1.22764.1.1.2.3.8.1 |
| This row contains adapt level values
for a group of carriers.
The group is defined by the couple
(plcNodeAdaptsBandIndex,plcNodeAdaptsGroupIndex). |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcNodeAdaptsEntry |
|
|
| plcNodeAdaptsBandIndex |
1.3.6.1.4.1.22764.1.1.2.3.8.1.1 |
| The band number on which the adapt values are defined. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| plcNodeAdaptsGroupIndex |
1.3.6.1.4.1.22764.1.1.2.3.8.1.2 |
| The group number on which the adapt values are defined. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
GroupValue |
|
|
| plcNodeAdaptsCarrier1 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.3 |
| The adapt level of the first carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier2 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.4 |
| The adapt level of the second carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier3 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.5 |
| The adapt level of the third carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier4 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.6 |
| The adapt level of the fourth carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier5 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.7 |
| The adapt level of the fifth carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier6 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.8 |
| The adapt level of the sixth carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier7 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.9 |
| The adapt level of the seventh carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeAdaptsCarrier8 |
1.3.6.1.4.1.22764.1.1.2.3.8.1.10 |
| The adapt level of the eighth carrier of the group. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
AdaptValue |
|
|
| plcNodeNetConfigEntry |
1.3.6.1.4.1.22764.1.1.2.3.10.1 |
| This row contains ip and mac address
used by an interface. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
PlcNodeNetConfigEntry |
|
|
| plcNodeIpAddr |
1.3.6.1.4.1.22764.1.1.2.3.10.1.1 |
| The IP address of the IP layer above the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| plcNodeNetMask |
1.3.6.1.4.1.22764.1.1.2.3.10.1.2 |
| The IP Subnet mask of the IP layer above the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| plcNodeMacAddr |
1.3.6.1.4.1.22764.1.1.2.3.10.1.3 |
| The MAC address of the MAC layer above the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
MacAddress |
|
|
| plcNodeGateway |
1.3.6.1.4.1.22764.1.1.2.3.10.1.4 |
| The Gateway address of the IP layer above the interface. |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
IpAddress |
|
|
| plcNodeActionsCommitProceed |
1.3.6.1.4.1.22764.1.1.2.3.11.1.1 |
| True to request the commit of the configuration
changes into the flash memory |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcNodeActionsResetProceed |
1.3.6.1.4.1.22764.1.1.2.3.11.2.1 |
| True to request the reset of the node.
This operation will terminate the communication
between the manager and the node |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcBssId |
1.3.6.1.4.1.22764.1.1.2.6 |
| OBJECT IDENTIFIER |
|
|
|
| plcMasterBssId |
1.3.6.1.4.1.22764.1.1.2.6.1 |
| The value of the master Bss Id |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..99 |
|
| plcSlaveBssId |
1.3.6.1.4.1.22764.1.1.2.6.2 |
| The value of the slave Bss Id |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
INTEGER |
0..99 |
|
| plcSpy |
1.3.6.1.4.1.22764.1.1.2.7 |
| OBJECT IDENTIFIER |
|
|
|
| plcSpyIsDynamic |
1.3.6.1.4.1.22764.1.1.2.7.1 |
| True to set the spy dynamic mode |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcStaticSpySynchBandNb |
1.3.6.1.4.1.22764.1.1.2.7.2 |
| The synchronization band number used for static spy mode |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
BandValue |
|
|
| softwareTable |
1.3.6.1.4.1.22764.1.1.3.4 |
| This table contains the current and reserve
softwares of the node. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SEQUENCE OF |
|
|
| |
|
SoftwareEntry |
|
| softwareEntry |
1.3.6.1.4.1.22764.1.1.3.4.1 |
| This row contains software information. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SoftwareEntry |
|
|
| softwareIndex |
1.3.6.1.4.1.22764.1.1.3.4.1.1 |
| The index number of the software. |
| Status: current |
Access: not-accessible |
| OBJECT-TYPE |
|
|
|
| |
SoftwareIndex |
|
|
| softwareVersion |
1.3.6.1.4.1.22764.1.1.3.4.1.2 |
| The name of the software release. |
| Status: current |
Access: read-only |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..255) |
|
| softwareUploadPassword |
1.3.6.1.4.1.22764.1.1.3.5.3 |
| The user password on the TFTP server.
Warning: This field is displayed using 6 * characters |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
DisplayString |
Size(0..16) |
|
| softwareActionProceed |
1.3.6.1.4.1.22764.1.1.3.6.3 |
| True to request the switch between the current
and the reserver software to start |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| plcGroups |
1.3.6.1.4.1.22764.1.1.4.2 |
| OBJECT IDENTIFIER |
|
|
|
| plcCompliance |
1.3.6.1.4.1.22764.1.1.4.1.1 |
| The compliance statement for SPC200 chip. |
| Status: current |
Access: read-only |
| MODULE-COMPLIANCE |
|
|
|
| nodeGroup |
1.3.6.1.4.1.22764.1.1.4.2.1 |
| A collection of objects providing
node configuration information. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| topologyGroup |
1.3.6.1.4.1.22764.1.1.4.2.3 |
| A collection of objects providing
topology configuration. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| statisticGroup |
1.3.6.1.4.1.22764.1.1.4.2.5 |
| A collection of objects providing
statistic data on node and plc link performances. |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| softwareGroup |
1.3.6.1.4.1.22764.1.1.4.2.6 |
| A collection of objects providing
software management |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| analyserGroup |
1.3.6.1.4.1.22764.1.1.4.2.7 |
| A collection of objects providing
spectrum analyser data |
| Status: current |
Access: read-only |
| OBJECT-GROUP |
|
|
|
| agentCapabilities |
1.3.6.1.4.1.22764.1.1.4.3 |
| The SPC200 chip SNMP agent capabilities |
| Status: current |
Access: not-implemented |
| AGENT-CAPABILITIES |
|
|
|
| ipExt |
1.3.6.1.4.1.22764.1.4 |
| Extended ip needed for SPiDCOM functionalities |
| Status: current |
Access: not-implemented |
| OBJECT-IDENTITY |
|
|
|
| ipDynamic |
1.3.6.1.4.1.22764.1.4.1 |
| True if Ip address is set dynamically |
| Status: current |
Access: read-write |
| OBJECT-TYPE |
|
|
|
| |
TruthValue |
|
|
| ipExtGroup |
1.3.6.1.4.1.22764.1.4.2 |
| The fields needed by the SPiDCOM functionalities |
| Status: current |
Access: read-write |
| OBJECT-GROUP |
|
|
|