SONOMASYSTEMS-SONOMA-ATM-E1-MIB

File: SONOMASYSTEMS-SONOMA-ATM-E1-MIB.mib (10161 bytes)

Imported modules

RFC1155-SMI

RFC-1212

SONOMASYSTEMS-SONOMA-MIB

Imported symbols

Counter

OBJECT-TYPE

sonomaATM

Defined Types

AtmE1ConfPhyEntry
SEQUENCE
	atmE1ConfPhysIndex	INTEGER
	atmE1ConfLoopback	INTEGER
	atmE1ConfTxClockSelect	INTEGER
	atmE1ConfFillerCells	INTEGER

AtmE1StatsEntry
SEQUENCE
	atmE1StatsPhysIndex	INTEGER
	atmE1StatsNoSignals	Counter
	atmE1StatsRAIDetects	Counter
	atmE1StatsFASErrors	Counter
	atmE1StatsCVErrors	Counter
	atmE1StatsCRCErrors	Counter
	atmE1StatsEBitErrors	Counter
	atmE1StatsSyncLossCount	Counter
	atmE1StatsHECErrors	Counter
	atmE1StatsSignalLoss	INTEGER
	atmE1StatsRAIDetect	INTEGER
	atmE1StatsSyncLoss	INTEGER
	atmE1StatsTxClockLoss	INTEGER
	atmE1StatsClearCounters	INTEGER

Defined Values

sonomaE1ATMAdapterGroup		1.3.6.1.4.1.2926.25.7.6
OBJECT IDENTIFIER

atmE1ConfGroup		1.3.6.1.4.1.2926.25.7.6.1
OBJECT IDENTIFIER

atmE1StatsGroup		1.3.6.1.4.1.2926.25.7.6.2
OBJECT IDENTIFIER

atmE1ConfPhyTable		1.3.6.1.4.1.2926.25.7.6.1.1
A table of physical layer configuration for the E1 interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmE1ConfPhyEntry

atmE1ConfPhyEntry		1.3.6.1.4.1.2926.25.7.6.1.1.1
A entry in the table, containing information about the physical layer of a E1 interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmE1ConfPhyEntry

atmE1ConfPhysIndex		1.3.6.1.4.1.2926.25.7.6.1.1.1.1
The physical interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmE1ConfLoopback		1.3.6.1.4.1.2926.25.7.6.1.1.1.2
This object is used to modify the state of internal loopback....
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	disabled(1), internal(2), external(3)

atmE1ConfTxClockSelect		1.3.6.1.4.1.2926.25.7.6.1.1.1.3
Configure the transmit clock.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	internal(1), recovered(2)

atmE1ConfFillerCells		1.3.6.1.4.1.2926.25.7.6.1.1.1.4
This parameter indicates the type of filler cells to send when there are no data cells.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	unassigned(1), idle(2)

atmE1StatsTable		1.3.6.1.4.1.2926.25.7.6.2.1
A table of physical layer statistics information for the E1 interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		AtmE1StatsEntry

atmE1StatsEntry		1.3.6.1.4.1.2926.25.7.6.2.1.1
A entry in the table, containing information about the physical layer of a E1 interface
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	AtmE1StatsEntry

atmE1StatsPhysIndex		1.3.6.1.4.1.2926.25.7.6.2.1.1.1
The physical interface index.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

atmE1StatsNoSignals		1.3.6.1.4.1.2926.25.7.6.2.1.1.2
No signal error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsRAIDetects		1.3.6.1.4.1.2926.25.7.6.2.1.1.3
RAI Detect counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsFASErrors		1.3.6.1.4.1.2926.25.7.6.2.1.1.4
FAS (Frame Alignment Signal) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsCVErrors		1.3.6.1.4.1.2926.25.7.6.2.1.1.5
CV (Code Violation) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsCRCErrors		1.3.6.1.4.1.2926.25.7.6.2.1.1.6
CRC4 error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsEBitErrors		1.3.6.1.4.1.2926.25.7.6.2.1.1.7
E-Bit (FEBE) error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsSyncLossCount		1.3.6.1.4.1.2926.25.7.6.2.1.1.8
Sync Loss counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsHECErrors		1.3.6.1.4.1.2926.25.7.6.2.1.1.9
HEC error counter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

atmE1StatsSignalLoss		1.3.6.1.4.1.2926.25.7.6.2.1.1.10
Signal loss indication.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmE1StatsRAIDetect		1.3.6.1.4.1.2926.25.7.6.2.1.1.11
RAI indication.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmE1StatsSyncLoss		1.3.6.1.4.1.2926.25.7.6.2.1.1.12
Loss of sync indication.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmE1StatsTxClockLoss		1.3.6.1.4.1.2926.25.7.6.2.1.1.13
Loss of transmit clock indication.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	true(1), false(2)

atmE1StatsClearCounters		1.3.6.1.4.1.2926.25.7.6.2.1.1.14
Clear all counters in this group ONLY.
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	true(1), false(2)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor