SNMP-SMIv2-MIB

File: SNMP-SMIv2-MIB.mib (5147 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IF-MIB RFC1213-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
TimeTicks Counter32 snmpModules
mib-2 DisplayString TestAndIncr
TimeStamp MODULE-COMPLIANCE OBJECT-GROUP
NOTIFICATION-GROUP ifIndex ifAdminStatus
ifOperStatus egpNeighAddr

Defined Values

snmpMIB 1.3.6.1.6.3.1
The MIB module for SNMP entities. Copyright (C) The Internet Society (2002). This version of this MIB module is part of RFC 3418; see the RFC itself for full legal notices.
MODULE-IDENTITY    

snmpMIBObjects 1.3.6.1.6.3.1.1
OBJECT IDENTIFIER    

snmpTraps 1.3.6.1.6.3.1.1.5
OBJECT IDENTIFIER    

coldStart 1.3.6.1.6.3.1.1.5.1
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
Status: current Access: read-only
NOTIFICATION-TYPE    

warmStart 1.3.6.1.6.3.1.1.5.2
A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
Status: current Access: read-only
NOTIFICATION-TYPE    

linkDown 1.3.6.1.6.3.1.1.5.3
A linkDown trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is about to transition into the down state.
Status: current Access: read-only
NOTIFICATION-TYPE    

linkUp 1.3.6.1.6.3.1.1.5.4
A linkUp trap signifies that the SNMPv2 entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links has transitioned out of the down state.
Status: current Access: read-only
NOTIFICATION-TYPE    

authenticationFailure 1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the SNMP entity has received a protocol message that is not properly authenticated. While all implementations of SNMP entities MAY be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap will be generated.
Status: current Access: read-only
NOTIFICATION-TYPE    

egpNeighborLoss 1.3.6.1.6.3.1.1.5.6
An egpNeighborLoss trap signifies that an EGP neighbor for whom the sending protocol entity was an EGP peer has been marked down and the peer relationship no longer obtains.
Status: current Access: read-only
NOTIFICATION-TYPE