SIEMENS-HP4KHIM-MIB
File:
SIEMENS-HP4KHIM-MIB.mib (118530 bytes)
Imported modules
Imported symbols
Defined Types
HimPEN |
|
Octet String for storing PEN numbers. The format is
The PEN is displayed in the following format: [LTG]-[LTU]-[EBT].
LTG: Line/Trunk Group: always 1
LTU: Line/Trunk Unit: a number between 1 and 99
EBT: a three-digit number. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..9) |
|
HimSwitchNumber |
|
Data type of the switch number. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..17) |
|
HimYesNo |
|
Boolean data type:
1. no
2. yes
The order is set like this to comply with the definition of data leaves in the hicom MIB that use this convention implicitly. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
yes(1), no(2), other(0) |
|
DiscoveryStates |
|
INTEGER |
done(1), error(2), busy(3), finok(4), finerr(5), kill(6) |
|
|
HimPhoneNumber |
|
Convention that represents phone numbers in a HiPath system. |
TEXTUAL-CONVENTION |
|
|
|
|
OCTET STRING |
Size(0..22) |
|
HimShelfNWType |
|
Network type of the shelf. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
flex(1), local(2), apnw(3), apdl(4), other(0) |
|
HimWelPgEntry |
|
SEQUENCE |
|
|
|
|
himWelPgPabxId |
HimPabxId |
|
|
himWelPgSysNo |
HimSwitchNumber |
|
|
himHP4KVersion |
OCTET STRING |
|
|
himSystemRelease |
OCTET STRING |
|
|
himRevisionLevel |
OCTET STRING |
|
|
himHWArchitecture |
OCTET STRING |
|
|
himHWArchitectureType |
OCTET STRING |
|
|
himOperationMode |
OCTET STRING |
|
|
himSWUProc1 |
OCTET STRING |
|
|
himSWUMemory1 |
OCTET STRING |
|
|
himSWUProc2 |
OCTET STRING |
|
|
himSWUMemory2 |
OCTET STRING |
|
HimTechInfoEntry |
|
SEQUENCE |
|
|
|
|
himTechInfoPabxId |
HimPabxId |
|
|
himTechInfoInfoNo |
OCTET STRING |
|
|
himTechInfoDate |
OCTET STRING |
|
|
himTechInfoTechnicalData |
OCTET STRING |
|
|
himTechInfoNumber |
OCTET STRING |
|
|
himTechInfoExtraText |
OCTET STRING |
|
HimNotepadDataEntry |
|
SEQUENCE |
|
|
|
|
himNotepadDataPabxId |
HimPabxId |
|
|
himNotepadDataInfoNo |
Unsigned32 |
|
|
himNotepadDataDate |
OCTET STRING |
|
|
himNotepadDataText |
OCTET STRING |
|
HimProjPlanInfoEntry |
|
SEQUENCE |
|
|
|
|
himProjPlanPabxId |
HimPabxId |
|
|
himProjPlanInfoFile |
OCTET STRING |
|
|
himProjPlanInfoCreationDate |
OCTET STRING |
|
|
himProjPlanInfoCreationTime |
OCTET STRING |
|
HimSpecShelfDataEntry |
|
SEQUENCE |
|
|
|
|
himSpecShelfDataPabxId |
HimPabxId |
|
|
himSpecShelfDataAddress |
OCTET STRING |
|
|
himSpecShelfDataFrameType |
OCTET STRING |
|
|
himSpecShelfDataLTU |
INTEGER |
|
|
himSpecShelfDataNetworkType |
HimShelfNWType |
|
|
himSpecShelfDataNetworkAddress |
IpAddress |
|
|
himSpecShelfDataRemote |
OCTET STRING |
|
|
himSpecShelfDataLocation |
OCTET STRING |
|
|
himSpecShelfDataLTUC |
OCTET STRING |
|
HimSWUBoardEntry |
|
SEQUENCE |
|
|
|
|
himSWUBoardPabxId |
HimPabxId |
|
|
himSWUBoardPEN |
HimPEN |
|
|
himSWUBoardOverlayLTU |
OCTET STRING |
|
|
himSWUBoardType |
OCTET STRING |
|
|
himSWUBoardNominal |
OCTET STRING |
|
|
himSWUBoardActual |
OCTET STRING |
|
|
hhimSWUBoardFirmware |
OCTET STRING |
|
|
himSWUBoardRev |
OCTET STRING |
|
|
himSWUBoardFunctId |
OCTET STRING |
|
|
himSWUBoardMode |
OCTET STRING |
|
|
himSWUBoardLWNo |
OCTET STRING |
|
|
himSWUBoardLWInterVer |
OCTET STRING |
|
|
himSWUBoardLWName |
OCTET STRING |
|
|
himSWUBoardLWDate |
OCTET STRING |
|
HimPSIOAssEntry |
|
SEQUENCE |
|
|
|
|
himPSIOAssPabxId |
HimPabxId |
|
|
himPSIOAssPEN |
HimPEN |
|
|
himPSIOAssAssembly |
OCTET STRING |
|
|
himPSIOAssActual |
OCTET STRING |
|
|
himPSIOAssFirmware |
OCTET STRING |
|
HimSerialLineEntry |
|
SEQUENCE |
|
|
|
|
himSerialLinePabxId |
HimPabxId |
|
|
himSerialLineNumber |
Unsigned32 |
|
|
himSerialLineBoardType |
OCTET STRING |
|
|
himSerialLineSpeed |
Unsigned32 |
|
|
himSerialLineLogDevName |
OCTET STRING |
|
|
himSerialLineDevType |
OCTET STRING |
|
|
himSerialLineType |
INTEGER |
|
HimSCSIDevEntry |
|
SEQUENCE |
|
|
|
|
himSCSIDevPabxId |
HimPabxId |
|
|
himSCSIDevId |
Unsigned32 |
|
|
himSCSIDevType |
OCTET STRING |
|
|
himSCSIDevName |
OCTET STRING |
|
|
himSCSIDevFirmware |
OCTET STRING |
|
|
himSCSIDevLoadDrive |
OCTET STRING |
|
HimCabinetEntry |
|
SEQUENCE |
|
|
|
|
himCabPabxId |
HimPabxId |
|
|
himCabAddr |
OCTET STRING |
|
|
himCabPhysAddr |
OCTET STRING |
|
|
himCabCabinet |
OCTET STRING |
|
|
himCabPartNo |
OCTET STRING |
|
|
himCabShelfNo |
Unsigned32 |
|
|
himCabFrame |
OCTET STRING |
|
|
himCabPid1 |
OCTET STRING |
|
|
himCabPid2 |
OCTET STRING |
|
|
himCabPid3 |
OCTET STRING |
|
|
himCabLTUNo |
OCTET STRING |
|
HimMemScalingEntry |
|
SEQUENCE |
|
|
|
|
himMemScalingPabxId |
HimPabxId |
|
|
himMemScalingUnit |
OCTET STRING |
|
|
himMemScalingUsed |
Integer32 |
|
|
himMemScalingMaxUsed |
Integer32 |
|
|
himMemScalingAllocated |
Integer32 |
|
|
himMemScalingStandard |
Integer32 |
|
|
himMemScalingSysMax |
Integer32 |
|
HimDBConfSysEntry |
|
SEQUENCE |
|
|
|
|
himDBConfSysPabxId |
HimPabxId |
|
|
himDBConfSysClass1 |
OCTET STRING |
|
|
himDBConfSysClass2 |
OCTET STRING |
|
|
himDBConfSysHWAss1 |
OCTET STRING |
|
|
himDBConfSysHWAss2 |
OCTET STRING |
|
|
himDBConfSysDevLine1 |
OCTET STRING |
|
|
himDBConfSysDevLine2 |
OCTET STRING |
|
|
himDBConfSysOpMode |
INTEGER |
|
|
himDBConfSysResType |
OCTET STRING |
|
|
himDBConfSysHWArch |
OCTET STRING |
|
|
himDBConfSysHWArchType |
OCTET STRING |
|
|
himDBConfSysNo |
HimSwitchNumber |
|
|
himDBConfSysLoc |
INTEGER |
|
|
himDBConfSysBaseApp |
OCTET STRING |
|
|
himDBConfSysDBApp |
OCTET STRING |
|
|
himDBConfSysID |
OCTET STRING |
|
HimDBConfHWEntry |
|
SEQUENCE |
|
|
|
|
himDBConfHWPabxId |
HimPabxId |
|
|
himDBConfHWLTG |
Integer32 |
|
|
himDBConfHWLTU |
Integer32 |
|
|
himDBConfHWLines |
Integer32 |
|
|
himDBConfHWPorts |
Integer32 |
|
|
himDBConfHWPBC |
Integer32 |
|
|
himDBConfHWMTSBdPerGSN |
Integer32 |
|
|
himDBConfHWSIUPPerLTU |
Integer32 |
|
|
himDBConfHWDIUCPerLTU |
Integer32 |
|
|
himDBConfHWHwyPerMTSBd |
Integer32 |
|
|
himDBConfHWHDLCPerDCL |
Integer32 |
|
|
himDBConfHWPBCPerDCL |
Integer32 |
|
|
himDBConfHWStdSIULine |
Integer32 |
|
|
himDBConfHWConfLine |
Integer32 |
|
|
himDBConfHWDBDim |
OCTET STRING |
|
|
himDBConfHWTableVer |
Integer32 |
|
HimHWDataEntry |
|
SEQUENCE |
|
|
|
|
himHWDataPabxId |
HimPabxId |
|
|
himHWArch |
OCTET STRING |
|
|
himHWArchType |
OCTET STRING |
|
|
himHWOpMode |
OCTET STRING |
|
|
himHWSWUProc1 |
OCTET STRING |
|
|
himHWSWUMem1 |
OCTET STRING |
|
|
himHWSWUProc2 |
OCTET STRING |
|
|
himHWSWUMem2 |
OCTET STRING |
|
|
himHWADPProc |
OCTET STRING |
|
|
himHWADPMem |
OCTET STRING |
|
HimLWDataOnCBEntry |
|
SEQUENCE |
|
|
|
|
himLWDataOnCBPabxId |
HimPabxId |
|
|
himLWOnCBAss |
OCTET STRING |
|
|
himLWOnCBPBCAddr |
OCTET STRING |
|
|
himLWOnCBFileName |
OCTET STRING |
|
|
himLWOnCBProdTime |
OCTET STRING |
|
HimLWOnProcEntry |
|
SEQUENCE |
|
|
|
|
himLWOnProcPabxId |
HimPabxId |
|
|
himLWOnProcAss |
OCTET STRING |
|
|
himLWOnProcInfoType |
OCTET STRING |
|
|
himLWOnProcLWId |
OCTET STRING |
|
|
himLWOnProcLWIdCMP |
OCTET STRING |
|
|
himLWOnProcLWIdLP |
OCTET STRING |
|
HimLWOnCSIUEntry |
|
SEQUENCE |
|
|
|
|
himLWOnCSIUPabxId |
HimPabxId |
|
|
himLWOnCSIUNominal |
OCTET STRING |
|
|
himLWOnCSIULWNo |
OCTET STRING |
|
|
himLWOnCSIUProc |
OCTET STRING |
|
|
himLWOnCSIUSlot |
OCTET STRING |
|
|
himLWOnCSIUActual |
OCTET STRING |
|
|
himLWOnCSIUFileName |
OCTET STRING |
|
|
himLWOnCSIUFileProd |
OCTET STRING |
|
HimMacAddrEntry |
|
SEQUENCE |
|
|
|
|
himMacAddrPabxId |
HimPabxId |
|
|
himMacAddrProc |
OCTET STRING |
|
|
himMacAddrInfoType |
OCTET STRING |
|
|
himMacAddrCLan |
MacAddress |
|
|
himMacAddrIPDA |
MacAddress |
|
HimMarkFeatEntry |
|
SEQUENCE |
|
|
|
|
himMarkFeatPabxId |
HimPabxId |
|
|
himMarkFeatVer |
OCTET STRING |
|
|
himMarkFeatSerNo |
OCTET STRING |
|
|
himMarkFeatHWId |
OCTET STRING |
|
|
himMarkFeatInstallDate |
OCTET STRING |
|
|
himMarkFeatExpiryDate |
OCTET STRING |
|
|
himMarkFeatConfCode |
OCTET STRING |
|
|
himMarkFeatTrialModeAct |
HimYesNo |
|
|
himMarkFeatTrialRemDays |
Integer32 |
|
HimSalesFeatEntry |
|
SEQUENCE |
|
|
|
|
himSalesFeatPabxId |
HimPabxId |
|
|
himSalesFeatMarketPackId |
OCTET STRING |
|
|
himSalesFeatMarketPack |
OCTET STRING |
|
|
himSalesFeatContract |
OCTET STRING |
|
|
himSalesFeatUsed |
OCTET STRING |
|
|
himSalesFeatFree |
OCTET STRING |
|
|
himSalesFeatMarkForTrial |
OCTET STRING |
|
HimTechFeatEntry |
|
SEQUENCE |
|
|
|
|
himTechFeatPabxId |
HimPabxId |
|
|
himTechFeatId |
OCTET STRING |
|
|
himTechFeatName |
OCTET STRING |
|
|
himTechFeatState |
HimYesNo |
|
HimSwitchAPSEntry |
|
SEQUENCE |
|
|
|
|
himSwitchAPSPabxId |
HimPabxId |
|
|
himSwitchAPSName |
OCTET STRING |
|
|
himSwitchAPSCorrVer |
OCTET STRING |
|
|
himSwitchAPSPartNo |
OCTET STRING |
|
HimReplAMOEntry |
|
SEQUENCE |
|
|
|
|
himReplAMOPabxId |
HimPabxId |
|
|
himReplAMOAPS |
OCTET STRING |
|
|
himReplAMOName |
OCTET STRING |
|
|
himReplAMOInAPSDir |
OCTET STRING |
|
|
himReplAMOSubsystem |
OCTET STRING |
|
HimPatchInfoEntry |
|
SEQUENCE |
|
|
|
|
himPatchInfoPabxId |
HimPabxId |
|
|
himPatchInfoPatchNo |
OCTET STRING |
|
|
himPatchInfoPatchGroup |
OCTET STRING |
|
|
himPatchInfoOpt |
HimYesNo |
|
|
himPatchInfoActHD |
OCTET STRING |
|
|
himPatchInfoActADP |
OCTET STRING |
|
|
himPatchInfoActBP |
OCTET STRING |
|
HimSWVerOnProcEntry |
|
SEQUENCE |
|
|
|
|
himSWVerOnProcPabxId |
HimPabxId |
|
|
himSWVerOnProcSrc |
OCTET STRING |
|
|
himSWVerOnProcSWVer |
OCTET STRING |
|
|
himSWVerOnProcItemCodeNoPrefix |
OCTET STRING |
|
|
himSWVerOnProcHP4KVer |
OCTET STRING |
|
|
himSWVerOnProcSysRel |
OCTET STRING |
|
|
himSWVerOnProcCountry |
OCTET STRING |
|
|
himSWVerOnProcCountryCode |
OCTET STRING |
|
|
himSWVerOnProcRevNo |
OCTET STRING |
|
HimSWPkgVerEntry |
|
SEQUENCE |
|
|
|
|
himSWPkgVerPabxId |
HimPabxId |
|
|
himSWPkgVerPkgAbbr |
OCTET STRING |
|
|
himSWPkgVerPkgName |
OCTET STRING |
|
|
himSWPkgVerVersion |
OCTET STRING |
|
|
himSWPkgVerInstAt |
OCTET STRING |
|
|
himSWPkgVerStatus |
INTEGER |
|
HimSysBasicEntry |
|
SEQUENCE |
|
|
|
|
himSysBasicPabxId |
HimPabxId |
|
|
himSysBasicDomain |
OCTET STRING |
|
|
himSysBasicNodeNo |
OCTET STRING |
|
|
himSysBasicLEGK |
HimYesNo |
|
HimSysLANCardsEntry |
|
SEQUENCE |
|
|
|
|
himSysLANCardsPabxId |
HimPabxId |
|
|
himSysLANCardsIPAddr |
IpAddress |
|
|
himSysLANCardsNetMask |
IpAddress |
|
|
himSysLANCardsBroadCast |
IpAddress |
|
|
himSysLANCardsType |
INTEGER |
|
|
himSysLANCardsStatus |
INTEGER |
|
HimSysHostsEntry |
|
SEQUENCE |
|
|
|
|
himSysHostsPabxId |
HimPabxId |
|
|
himSysHostsNo |
Integer32 |
|
|
himSysHostsIPAddr |
IpAddress |
|
|
himSysHostsName |
OCTET STRING |
|
HimSysWAMLConnEntry |
|
SEQUENCE |
|
|
|
|
himSysWAMLConnPabxId |
HimPabxId |
|
|
himSysWAMLConnLTG |
Integer32 |
|
|
himSysWAMLConnLTU |
Integer32 |
|
|
himSysWAMLConnSlot |
Integer32 |
|
|
himSysWAMLConnRufNr |
HimPhoneNumber |
|
|
himSysWAMLConnBChl |
Unsigned32 |
|
|
himSysWAMLConnStatus |
OCTET STRING |
|
HimSysWAMLConnIPEntry |
|
SEQUENCE |
|
|
|
|
himSysWAMLConnIPPabxId |
HimPabxId |
|
|
himSysWAMLConnIPLTG |
Integer32 |
|
|
himSysWAMLConnIPLTU |
Integer32 |
|
|
himSysWAMLConnIPSlot |
Integer32 |
|
|
himSysWAMLConnIPIfName |
OCTET STRING |
|
|
himSysWAMLConnIPAddr |
IpAddress |
|
|
himSysWAMLConnIPNetMask |
IpAddress |
|
HimBoardBasicEntry |
|
SEQUENCE |
|
|
|
|
himBoardBasicPabxId |
HimPabxId |
|
|
himBoardBasicLTG |
Integer32 |
|
|
himBoardBasicLTU |
Integer32 |
|
|
himBoardBasicSlot |
Integer32 |
|
|
himBoardBasicFuncId |
Integer32 |
|
|
himBoardBasicCat |
INTEGER |
|
|
himBoardBasicName |
OCTET STRING |
|
|
himBoardBasicVOIPSec |
HimYesNo |
|
|
himBoardBasicLWVar |
OCTET STRING |
|
|
himBoardBasicNoCirc |
Integer32 |
|
HimBoardIPEntry |
|
SEQUENCE |
|
|
|
|
himBoardIPGwyIPAddr |
IpAddress |
|
|
himBoardIPSrcIPAddr |
IpAddress |
|
|
himBoardIPNetMask |
IpAddress |
|
|
himBoardIPDefRouter |
IpAddress |
|
|
himBoardIPCustLANIP |
IpAddress |
|
|
himBoardIPSTMI2IGWSubMask |
IpAddress |
|
|
himBoardIPDefGWIP |
IpAddress |
|
|
himBoardIPManStatIP |
IpAddress |
|
|
himBoardIPManStatPort |
Integer32 |
|
|
himBoardIPBckpServIP |
IpAddress |
|
|
himBoardIPBckpServPort |
Integer32 |
|
HimBoardLocEntry |
|
SEQUENCE |
|
|
|
|
himBoardLocId |
Integer32 |
|
|
himBoardLocLoc |
OCTET STRING |
|
|
himBoardLocPhoneNo |
HimPhoneNumber |
|
|
himBoardLocFaxNo |
HimPhoneNumber |
|
HimIPDAGenEntry |
|
SEQUENCE |
|
|
|
|
himIPDAGenPabxId |
HimPabxId |
|
|
himIPDAGenSpeed |
Integer32 |
|
|
himIPDAGenMode |
INTEGER |
|
|
himIPDAGenPayConn |
Integer32 |
|
|
himIPDAGenSigConn |
Integer32 |
|
HimIPDAGenIPEntry |
|
SEQUENCE |
|
|
|
|
himIPDAGenIPNetAddr |
IpAddress |
|
|
himIPDAGenIPNetMask |
IpAddress |
|
|
himIPDAGenIPCCAAddr |
IpAddress |
|
|
himIPDAGenIPCCBAddr |
IpAddress |
|
|
himIPDAGenIPDefRoutAddr |
IpAddress |
|
|
himIPDAGenIPSurvNetAddr |
IpAddress |
|
HimIPDABasicEntry |
|
SEQUENCE |
|
|
|
|
himIPDABasicPabxId |
HimPabxId |
|
|
himIPDABasicLTU |
Integer32 |
|
|
himIPDABasicConnType |
HimShelfNWType |
|
|
himIPDABasicBChanNo |
Integer32 |
|
|
himIPDABasicConvAMLaw |
HimYesNo |
|
HimIPDAIPEntry |
|
SEQUENCE |
|
|
|
|
himIPDAIPAccPtAddr |
IpAddress |
|
|
himIPDAIPTAccPtAddr |
IpAddress |
|
|
himIPDAIPAccPtRoutAddr |
IpAddress |
|
|
himIPDAIPNetMaskNW |
IpAddress |
|
|
himIPDAIPAccPtPriRoutAddr |
IpAddress |
|
|
himIPDAIPNetMaskDL |
IpAddress |
|
HimIPDALocEntry |
|
SEQUENCE |
|
|
|
|
himIPDALocId |
Integer32 |
|
|
himIPDALocLoc |
OCTET STRING |
|
|
himIPDALocPhoneNo |
HimPhoneNumber |
|
|
himIPDALocFaxNo |
HimPhoneNumber |
|
HimDiscovEntry |
|
SEQUENCE |
|
|
|
|
himDiscovPabxId |
HimPabxId |
|
|
himDiscovPabxMnemonic |
DisplayString |
|
|
himDiscovStatus |
DiscoveryStates |
|
|
himDiscovMode |
DiscoveryModes |
|
|
himDiscovTimDat |
DisplayString |
|
|
himDiscovErrTimDat |
DisplayString |
|
Defined Values
siemens |
1.3.6.1.4.1.4329 |
OBJECT IDENTIFIER |
|
|
|
hp4khim |
1.3.6.1.4.1.4329.2.51 |
Tok_String |
MODULE-IDENTITY |
|
|
|
himWelcomePage |
1.3.6.1.4.1.4329.2.51.1 |
OBJECT IDENTIFIER |
|
|
|
himWelPgEntry |
1.3.6.1.4.1.4329.2.51.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimWelPgEntry |
|
|
himWelPgSysNo |
1.3.6.1.4.1.4329.2.51.1.1.1.2 |
This field contains the system number (max. 17 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimSwitchNumber |
|
|
himHP4KVersion |
1.3.6.1.4.1.4329.2.51.1.1.1.3 |
This field contains the Hicom/HiPath version number of the system (max. 4 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himSystemRelease |
1.3.6.1.4.1.4329.2.51.1.1.1.4 |
This field contains the system release number of the system (max. 2 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himRevisionLevel |
1.3.6.1.4.1.4329.2.51.1.1.1.5 |
This field contains the revision number of the system software (max. 2 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himHWArchitecture |
1.3.6.1.4.1.4329.2.51.1.1.1.6 |
This field contains the information on hardware architecture in the format [hw-architecture][system-variant][hw-design]
[hw-architecture]
Abbreviation describing hardware architecture. F.i '4300', '350E', etc.
[system-variant]
H40: SYSTEM VARIANT 40
H80: SYSTEM VARIANT 80
H600: SYSTEM VARIANT 600
[hw-design]
ECX: HARDWARE DESIGN EXTENDED COMPACT EXTENDED
ECDSC: HARDWARE DESIGN EXTENDED COMPACT DSC
CXE: HARDWARE DESIGN EXTENDED COMPACT CXE |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..25) |
|
himHWArchitectureType |
1.3.6.1.4.1.4329.2.51.1.1.1.7 |
This field contains abbreviation describing hardware architecture type (max. 3 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himOperationMode |
1.3.6.1.4.1.4329.2.51.1.1.1.8 |
This field contains the operating mode of the system.
Possible Values:
SIMPLEX: OPERATING MODE SIMPLEX
DUPLEX: OPERATING MODE DUPLEX REDUNDANCY |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..7) |
|
himSWUProc1 |
1.3.6.1.4.1.4329.2.51.1.1.1.9 |
These fields contains the name of the SWU processor board (max. 8 characters).
SWU = Switching Unit
Possible values:
- CC-A
- CC-B |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSWUMemory1 |
1.3.6.1.4.1.4329.2.51.1.1.1.10 |
These fields contain the size of the SWU memory for each processor card.
SWU = Switching Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himSWUProc2 |
1.3.6.1.4.1.4329.2.51.1.1.1.11 |
These fields contains the name of the SWU processor board (max. 8 characters).
SWU = Switching Unit
Possible values:
- CC-A
- CC-B |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSWUMemory2 |
1.3.6.1.4.1.4329.2.51.1.1.1.12 |
These fields contain the size of the SWU memory for each processor card.
SWU = Switching Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himTechInfoEntry |
1.3.6.1.4.1.4329.2.51.2.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimTechInfoEntry |
|
|
himTechInfoInfoNo |
1.3.6.1.4.1.4329.2.51.2.1.1.2 |
This field contains the number of the subsystem. This number can be assigned as required when configuring the subsystem. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..7) |
|
himTechInfoDate |
1.3.6.1.4.1.4329.2.51.2.1.1.3 |
This field contains the date on which the subsystem was configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himTechInfoTechnicalData |
1.3.6.1.4.1.4329.2.51.2.1.1.4 |
This field contains the technical data of the subsystem. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..40) |
|
himTechInfoNumber |
1.3.6.1.4.1.4329.2.51.2.1.1.5 |
This field contains the number of each subsystem configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himNotepadDataTable |
1.3.6.1.4.1.4329.2.51.2.2 |
This node contains the system data entered in a notepad. The table for notepad entries holds a maximum of 30 data records. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimNotepadDataEntry |
|
himNotepadDataEntry |
1.3.6.1.4.1.4329.2.51.2.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimNotepadDataEntry |
|
|
himNotepadDataInfoNo |
1.3.6.1.4.1.4329.2.51.2.2.1.2 |
This field contains the number of the subsystem. This number is assigned permanently when configuring the subsystem. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
himNotepadDataDate |
1.3.6.1.4.1.4329.2.51.2.2.1.3 |
This field contains the date on which the subsystem was configured. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himNotepadDataText |
1.3.6.1.4.1.4329.2.51.2.2.1.4 |
This field contains the technical data of the subsystem. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..77) |
|
himProjPlanInfoTable |
1.3.6.1.4.1.4329.2.51.2.3 |
This screen makes it possible to generate a file with project planning data. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimProjPlanInfoEntry |
|
himProjPlanInfoEntry |
1.3.6.1.4.1.4329.2.51.2.3.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimProjPlanInfoEntry |
|
|
himProjPlanInfoFile |
1.3.6.1.4.1.4329.2.51.2.3.1.2 |
This field contains the name of the project planning file. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..12) |
|
himProjPlanInfoCreationDate |
1.3.6.1.4.1.4329.2.51.2.3.1.3 |
This field contains the date on which the project planning file was generated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himProjPlanInfoCreationTime |
1.3.6.1.4.1.4329.2.51.2.3.1.4 |
This field contains the time at which the project planning file was generated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSpecShelfDataTable |
1.3.6.1.4.1.4329.2.51.3.1 |
All subscriber and trunk-related lines are grouped within LTU (Line/Trunk Unit) frames. Each frame has several slots for modules. The frame is connected to the system via the LTUC control board.
This table contains the frame configuration. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSpecShelfDataEntry |
|
himSpecShelfDataEntry |
1.3.6.1.4.1.4329.2.51.3.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSpecShelfDataEntry |
|
|
himSpecShelfDataAddress |
1.3.6.1.4.1.4329.2.51.3.1.1.2 |
This field contains the address of the shelf in format LTG.LTU.
LTG:Line/Trunk Group
LTU: Line/Trunk Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..9) |
|
himSpecShelfDataFrameType |
1.3.6.1.4.1.4329.2.51.3.1.1.3 |
This field contains the part number of the frame. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSpecShelfDataLTU |
1.3.6.1.4.1.4329.2.51.3.1.1.4 |
This field contains type of LTU (Line/Trunk Unit) frame.
Possible values for LTU frame type:
- PREATL - frametype for Preatlantic Hicom Types
- CC40F - basisframe for 40CMX
- CC80W - basisframe for 80CMX
- CC80F - basisframe for 80CMX/DSC and CXE
- L80XF - for 80CMX/DSC, CXE, 600ECS and AP shelves
- L80XW - extension frame for 80CMX/DSC
- LTUW - frame for 600ECX and AP shelves
Possible values for AP shelf type:
- L80XF - for 80CMX/DSC, CXE, 600ECS and AP shelves
- LTUW - frame for 600ECX and AP shelves
- INCH19 - 19 inch frame for AP shelves |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
preatl(1), cc40f(2), cc80w(3), cc80f(4), l80xf(5), l80xw(6), ltuw(7), inch19(8), ap37009(9), ap370013(10), ext-comp-x(11), other(0) |
|
himSpecShelfDataRemote |
1.3.6.1.4.1.4329.2.51.3.1.1.7 |
This field shows if frame is remote.
Possible values:
- yes - frame is remote
- no - frame is not remote |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSpecShelfDataLocation |
1.3.6.1.4.1.4329.2.51.3.1.1.8 |
This field contains postal address (city, street, building, ..) , where a FLEX LTU or an AP shelf is located. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..48) |
|
himSpecShelfDataLTUC |
1.3.6.1.4.1.4329.2.51.3.1.1.9 |
This field contains part number adding LTUC module.
LTUC: Line/Trunk Unit Control. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..14) |
|
himSWUBoardTable |
1.3.6.1.4.1.4329.2.51.3.2 |
This table contains the configuration of the peripheral boards.
Periphery Assemblies
Peripheral and ring generator assemblies as well as SIU are configured in the LTU. The board is entered in the SWU database.
LTU = Line/Trunk Unit
SIU = Signaling Interface Unit
SWU = Switching Unit |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSWUBoardEntry |
|
himSWUBoardEntry |
1.3.6.1.4.1.4329.2.51.3.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSWUBoardEntry |
|
|
himSWUBoardPEN |
1.3.6.1.4.1.4329.2.51.3.2.1.2 |
This field contains the name of the board PEN.
PEN: Port Equipment Number
The PEN is displayed in the following format: [LTG]-[LTU]-[EBT].
LTG: Line/Trunk Group
LTU: Line/Trunk Unit
EBT: Slot |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPEN |
|
|
himSWUBoardOverlayLTU |
1.3.6.1.4.1.4329.2.51.3.2.1.3 |
This field contains the name of the overlay LTU (Line/Trunk Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWUBoardType |
1.3.6.1.4.1.4329.2.51.3.2.1.4 |
This field contains the name of the configured board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSWUBoardNominal |
1.3.6.1.4.1.4329.2.51.3.2.1.5 |
This field contains the name of the nominal board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himSWUBoardActual |
1.3.6.1.4.1.4329.2.51.3.2.1.6 |
This field contains part number of the board that is plugged in. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
hhimSWUBoardFirmware |
1.3.6.1.4.1.4329.2.51.3.2.1.7 |
This field contains the name of the firmware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himSWUBoardRev |
1.3.6.1.4.1.4329.2.51.3.2.1.8 |
This field contains the revision of the board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWUBoardFunctId |
1.3.6.1.4.1.4329.2.51.3.2.1.9 |
Function identification number for boards with more than one functions (e.g. SIUX, STMA, SLMO24). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSWUBoardMode |
1.3.6.1.4.1.4329.2.51.3.2.1.10 |
This field contains the mode of the board. The mode is only displayed for the RG/ACGEN board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSWUBoardLWNo |
1.3.6.1.4.1.4329.2.51.3.2.1.11 |
This field contains the number of the loadware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himSWUBoardLWInterVer |
1.3.6.1.4.1.4329.2.51.3.2.1.12 |
This field contains the interface version of the board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWUBoardLWName |
1.3.6.1.4.1.4329.2.51.3.2.1.13 |
This field contains the file name of the loadware file or of the initialization file. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
himSWUBoardLWDate |
1.3.6.1.4.1.4329.2.51.3.2.1.14 |
This field contains the date on which the loadware or the initialization file was generated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..20) |
|
himPSIOAssTable |
1.3.6.1.4.1.4329.2.51.4.1 |
This table contains the PSIO assemblies data. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimPSIOAssEntry |
|
himPSIOAssEntry |
1.3.6.1.4.1.4329.2.51.4.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimPSIOAssEntry |
|
|
himPSIOAssAssembly |
1.3.6.1.4.1.4329.2.51.4.1.1.3 |
This field contains the name of the PSIO board.
PSIO: Peripheral Serial Input Output |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himPSIOAssPEN |
1.3.6.1.4.1.4329.2.51.4.1.1.2 |
This field contains the name of the board PEN.
PEN: Port Equipment Number
The PEN is displayed in the following format: [LTG]-[LTU]-[EBT].
LTG: Line/Trunk Group
LTU: Line/Trunk Unit
EBT: Slot |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPEN |
|
|
himPSIOAssActual |
1.3.6.1.4.1.4329.2.51.4.1.1.4 |
This field contains the part number of the PSIO board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himPSIOAssFirmware |
1.3.6.1.4.1.4329.2.51.4.1.1.5 |
This field contains the firmware name of the PSIO board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himSerialLineEntry |
1.3.6.1.4.1.4329.2.51.4.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSerialLineEntry |
|
|
himSerialLineBoardType |
1.3.6.1.4.1.4329.2.51.4.2.1.3 |
This field contains abbreviation name of the board type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSerialLineNumber |
1.3.6.1.4.1.4329.2.51.4.2.1.2 |
This field contains the physical line number of the interface.
Possible Values: numeric, 8-63 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
8..63 |
|
himSerialLineSpeed |
1.3.6.1.4.1.4329.2.51.4.2.1.4 |
This field contains standardized transmission speed (baud rate).
Possible Values: 50, 100, 200, 300, 600, 1200, 2400, 4800, 9600, 19200. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
himSerialLineLogDevName |
1.3.6.1.4.1.4329.2.51.4.2.1.5 |
This field contains the logical device name of the line.
Possible Values:
Value - Description
CON1 - LOGICAL DEVICE CONNECTION,TERMINAL 1
CON2 - LOGICAL DEVICE CONNECTION,TERMINAL 2
CON3 - LOGICAL DEVICE CONNECTION,TERMINAL 3
CON4 - LOGICAL DEVICE CONNECTION,TERMINAL 4
CON5 - LOGICAL DEVICE CONNECTION 5
CON6 - LOGICAL DEVICE CONNECTION 6
PR1 - LOGICAL DEVICE:LINE PRINTER 1
PR2 - LOGICAL DEVICE:LINE PRINTER 2
PR3 - LOGICAL DEVICE:LINE PRINTER 3
PR4 - LOGICAL DEVICE:LINE PRINTER 4 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSerialLineDevType |
1.3.6.1.4.1.4329.2.51.4.2.1.6 |
This field contains the device type of the line.
Possible Values:
Value - Description
PT88 - DEVICE TYPE
QUOSC - QUME-ONLY-SCREEN
QUOPT - QUME-ONLY-PT88
QUSCAPT - QUME-SCREEN-AND-PT88
PCOSC - PC-D-ONLY-SCREEN
PCOPT - PC-D-ONLY-PT88
PCSCAPT - PC-D-SCREEN-AND-PT88
ASC - ASCII-CODE
EBC - EBCDIC CODE
RSV1 - RESERVED DEVICE TYPE 1
RSV2 - RESERVED DEVICE TYPE 2
RSV3 - RESERVED DEVICE TYPE 3 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..18) |
|
himSerialLineType |
1.3.6.1.4.1.4329.2.51.4.2.1.7 |
This field contains the line type (operation of synchronous lines (terminals) connected via V24 modems).
Possible values:
- ASY: asynchronous line type
- V24: ccitt rec v24 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
asy(1), v24(2), other(0) |
|
himSCSIDevTable |
1.3.6.1.4.1.4329.2.51.4.3 |
This table contains the data for the SCSI devices connected. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSCSIDevEntry |
|
himSCSIDevEntry |
1.3.6.1.4.1.4329.2.51.4.3.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSCSIDevEntry |
|
|
himSCSIDevId |
1.3.6.1.4.1.4329.2.51.4.3.1.2 |
This field contains the type of SCSI device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
0..7 |
|
himSCSIDevType |
1.3.6.1.4.1.4329.2.51.4.3.1.3 |
This field contains the SCSI ID of the device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..13) |
|
himSCSIDevName |
1.3.6.1.4.1.4329.2.51.4.3.1.4 |
This field contains the name of the SCSI device in format: [vendor] [product number]. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..25) |
|
himSCSIDevFirmware |
1.3.6.1.4.1.4329.2.51.4.3.1.5 |
This field contains the firmware name of the SCSI device. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..4) |
|
himSCSIDevLoadDrive |
1.3.6.1.4.1.4329.2.51.4.3.1.6 |
This field displays (if activity is in progress) the device from which the operating system and the database are started. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himCabinetTable |
1.3.6.1.4.1.4329.2.51.5.1 |
This table contains the data for configuring the cabinets and frames in a system. They reflect the physical structure of the system. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimCabinetEntry |
|
himCabinetEntry |
1.3.6.1.4.1.4329.2.51.5.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimCabinetEntry |
|
|
himCabPabxId |
1.3.6.1.4.1.4329.2.51.5.1.1.1 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPabxId |
|
|
himCabAddr |
1.3.6.1.4.1.4329.2.51.5.1.1.2 |
This field contains the cabinet address.
Structure of cabinet address:
P 1 01
| | |__Number of cabinet in cabinet row
| |_____Units, position of cabinet row
|_______Tens (P=0, Q=1), position of the cabinet |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..4) |
|
himCabPhysAddr |
1.3.6.1.4.1.4329.2.51.5.1.1.3 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himCabCabinet |
1.3.6.1.4.1.4329.2.51.5.1.1.4 |
This field contains the name of the cabinet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himCabPartNo |
1.3.6.1.4.1.4329.2.51.5.1.1.5 |
This field contains the part number of the cabinet. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..14) |
|
himCabShelfNo |
1.3.6.1.4.1.4329.2.51.5.1.1.6 |
This field contains the number of the shelf. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
1..14 |
|
himCabFrame |
1.3.6.1.4.1.4329.2.51.5.1.1.7 |
This field contains the name of the frame. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himCabPid1 |
1.3.6.1.4.1.4329.2.51.5.1.1.8 |
This field contains the processor ID 1. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himCabPid2 |
1.3.6.1.4.1.4329.2.51.5.1.1.9 |
This field contains the processor ID 2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himCabPid3 |
1.3.6.1.4.1.4329.2.51.5.1.1.10 |
This field contains the processor ID 2. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himCabLTUNo |
1.3.6.1.4.1.4329.2.51.5.1.1.11 |
This field contains the number of the LTU (Line/Trunk Unit).
The LTU range is divided in two parts: HHS (HICOM Host System) and AP (Access Point). The available values of the ranges are: HHS 1-15 and AP 17-99. The LTU 16 is forbidden. There are existing shelfes which are allowed only in HHS and others which are allowed only in the AP range. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himMemScalingTable |
1.3.6.1.4.1.4329.2.51.5.2 |
This screen contains the memory parameters for each of the devices or features specified.
The values are only displayed in Configuration Management. See also DIMSU parameter list. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimMemScalingEntry |
|
himMemScalingEntry |
1.3.6.1.4.1.4329.2.51.5.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimMemScalingEntry |
|
|
himMemScalingUnit |
1.3.6.1.4.1.4329.2.51.5.2.1.2 |
This field contains the parameter name (AMO DIMSU). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himMemScalingUsed |
1.3.6.1.4.1.4329.2.51.5.2.1.3 |
This value specifies the number of memory elements already used up. The comparison with the value in the Maximum field indicates how much of the allocated memory is still available for configuring devices or features. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himMemScalingMaxUsed |
1.3.6.1.4.1.4329.2.51.5.2.1.4 |
This field contains the number of memory elements allocated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himMemScalingAllocated |
1.3.6.1.4.1.4329.2.51.5.2.1.5 |
This field displays the maximum number of memory elements that once have been used up during the lifetime of the switch ('high water mark'). It gives an indication how much memory was necessary at one time, so it is advised to not reduce the Maximum value below this value. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himMemScalingStandard |
1.3.6.1.4.1.4329.2.51.5.2.1.6 |
Standard is the advised value to be set in the Maximum field, if you don't have special needs to set it to a specific value. If you set all devices and features to the standard values it is guaranteed that you don't run out of DIMSU memory. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himMemScalingSysMax |
1.3.6.1.4.1.4329.2.51.5.2.1.7 |
This field contains the maximum number of possible memory elements. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfSysEntry |
1.3.6.1.4.1.4329.2.51.6.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimDBConfSysEntry |
|
|
himDBConfSysClass1 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.2 |
This field contains the name of the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..12) |
|
himDBConfSysClass2 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.3 |
This field contains the coded name of the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himDBConfSysHWAss1 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.4 |
This field contains the hardware ID of the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..20) |
|
himDBConfSysHWAss2 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.5 |
This field contains the shortened hardware ID of the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..7) |
|
himDBConfSysDevLine1 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.6 |
This field contains the name of the product line. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..18) |
|
himDBConfSysDevLine2 |
1.3.6.1.4.1.4329.2.51.6.1.1.1.7 |
This field contains the shortened name of the product line.
Possible values:
- H300: EUROPE DEVELOPMENT
- HUSA: US DEVELOPMENT |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..4) |
|
himDBConfSysOpMode |
1.3.6.1.4.1.4329.2.51.6.1.1.1.8 |
This field contains the operating mode of the system.
Possible Values:
- SIMPLEX: OPERATING MODE SIMPLEX
- DUPLEX: OPERATING MODE DUPLEX REDUNDANCY |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
simplex(1), duplex(2), other(0) |
|
himDBConfSysResType |
1.3.6.1.4.1.4329.2.51.6.1.1.1.9 |
This field contains the restart identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himDBConfSysHWArch |
1.3.6.1.4.1.4329.2.51.6.1.1.1.10 |
This field contains the name of the hardware architecture. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himDBConfSysHWArchType |
1.3.6.1.4.1.4329.2.51.6.1.1.1.11 |
This field contains the name of the hardware architecture type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himDBConfSysNo |
1.3.6.1.4.1.4329.2.51.6.1.1.1.12 |
This field contains the number of the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimSwitchNumber |
|
|
himDBConfSysLoc |
1.3.6.1.4.1.4329.2.51.6.1.1.1.13 |
This field contains the name of the location in which the system is installed.
Possible Values:
- CUSTOMER (customer)
- SUPPORT (support)
- TESTLAB (testlab) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
customer(1), support(2), testlab(3), other(0) |
|
himDBConfSysBaseApp |
1.3.6.1.4.1.4329.2.51.6.1.1.1.14 |
This field contains the name of the base application. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himDBConfSysDBApp |
1.3.6.1.4.1.4329.2.51.6.1.1.1.15 |
This field contains the name of the database application. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himDBConfSysID |
1.3.6.1.4.1.4329.2.51.6.1.1.1.16 |
This field contains the system identification. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himDBConfHW |
1.3.6.1.4.1.4329.2.51.6.2 |
OBJECT IDENTIFIER |
|
|
|
himDBConfHWEntry |
1.3.6.1.4.1.4329.2.51.6.2.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimDBConfHWEntry |
|
|
himDBConfHWLTG |
1.3.6.1.4.1.4329.2.51.6.2.1.1.2 |
This field contains the number of LTGs in the system.
LTG: Line/Trunk Group |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1 |
|
himDBConfHWLTU |
1.3.6.1.4.1.4329.2.51.6.2.1.1.3 |
This field contains the number of LTUs in the system.
LTU: Line/Trunk Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..15 | 17..99 |
|
himDBConfHWLines |
1.3.6.1.4.1.4329.2.51.6.2.1.1.4 |
This field contains the number of lines in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWPorts |
1.3.6.1.4.1.4329.2.51.6.2.1.1.5 |
This field contains the number of ports in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWPBC |
1.3.6.1.4.1.4329.2.51.6.2.1.1.6 |
This field contains the number of peripheral board controllers (PBC) in the system. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWMTSBdPerGSN |
1.3.6.1.4.1.4329.2.51.6.2.1.1.7 |
This field contains the number of memory time switches (MTS) per group switching network (GSN). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWSIUPPerLTU |
1.3.6.1.4.1.4329.2.51.6.2.1.1.8 |
This field contains the number of SIUP boards per LTU (Line/Trunk Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWDIUCPerLTU |
1.3.6.1.4.1.4329.2.51.6.2.1.1.9 |
This field contains the number of DIUC boards per LTU (Line/Trunk Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWHwyPerMTSBd |
1.3.6.1.4.1.4329.2.51.6.2.1.1.10 |
This field contains the number highways (HYW) per MTS board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWHDLCPerDCL |
1.3.6.1.4.1.4329.2.51.6.2.1.1.11 |
This field contains the number of high level data link control (HDLC) channels per data communication link (DCL). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWPBCPerDCL |
1.3.6.1.4.1.4329.2.51.6.2.1.1.12 |
This field contains the number of peripheral board controllers (PBC) per data communication link (DCL). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWStdSIULine |
1.3.6.1.4.1.4329.2.51.6.2.1.1.13 |
This field contains the number of signaling unit lines.
SIU: Signaling-Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWConfLine |
1.3.6.1.4.1.4329.2.51.6.2.1.1.14 |
This field contains the number of lines in the CONFERENCE board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himDBConfHWDBDim |
1.3.6.1.4.1.4329.2.51.6.2.1.1.15 |
This field contains the name of the database dimensioning. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himDBConfHWTableVer |
1.3.6.1.4.1.4329.2.51.6.2.1.1.16 |
This field contains the version of the Conf table. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himHWData |
1.3.6.1.4.1.4329.2.51.6.3 |
OBJECT IDENTIFIER |
|
|
|
himHWDataEntry |
1.3.6.1.4.1.4329.2.51.6.3.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimHWDataEntry |
|
|
himHWArch |
1.3.6.1.4.1.4329.2.51.6.3.1.1.2 |
This field contains the name of the hardware architecture. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..25) |
|
himHWArchType |
1.3.6.1.4.1.4329.2.51.6.3.1.1.3 |
This field contains the name of the hardware architecture type. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himHWOpMode |
1.3.6.1.4.1.4329.2.51.6.3.1.1.4 |
This field contains the name of the operating mode. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..7) |
|
himHWSWUProc1 |
1.3.6.1.4.1.4329.2.51.6.3.1.1.5 |
These fields contain the name of the SWU processor board (max. 8 characters).
SWU = Switching Unit
Possible values:
- CC-A
- CC-B
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himHWSWUMem1 |
1.3.6.1.4.1.4329.2.51.6.3.1.1.6 |
These fields contain the size of the SWU memory for each processor board.
SWU = Switching Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himHWSWUProc2 |
1.3.6.1.4.1.4329.2.51.6.3.1.1.7 |
These fields contain the name of the SWU processor board (max. 8 characters).
SWU = Switching Unit
Possible values:
- CC-A
- CC-B
|
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himHWSWUMem2 |
1.3.6.1.4.1.4329.2.51.6.3.1.1.8 |
These fields contain the size of the SWU memory for each processor board.
SWU = Switching Unit |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himHWADPProc |
1.3.6.1.4.1.4329.2.51.6.3.1.1.9 |
This field contains the name of the ADP processor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himHWADPMem |
1.3.6.1.4.1.4329.2.51.6.3.1.1.10 |
This field contains the size of memory used by the ADP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himLWDataOnCBEntry |
1.3.6.1.4.1.4329.2.51.6.4.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimLWDataOnCBEntry |
|
|
himLWOnCBAss |
1.3.6.1.4.1.4329.2.51.6.4.1.1.2 |
This field contains the hardware ID of the board.
Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himLWOnCBPBCAddr |
1.3.6.1.4.1.4329.2.51.6.4.1.1.3 |
This field contains the peripheral board controller (PBC) address of the module.
Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himLWOnCBFileName |
1.3.6.1.4.1.4329.2.51.6.4.1.1.4 |
This field contains the filename of the loadware file.
Note: Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
himLWOnCBProdTime |
1.3.6.1.4.1.4329.2.51.6.4.1.1.5 |
This field contains the production date of the loadware.
Note:Certain types of processor boards (e. g. DPC5) are using only firmware. Therefore, no loadware data is displayed and this field remains empty. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..20) |
|
himLWOnProcEntry |
1.3.6.1.4.1.4329.2.51.6.5.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimLWOnProcEntry |
|
|
himLWOnProcAss |
1.3.6.1.4.1.4329.2.51.6.5.1.1.2 |
This field contains the name of the directory where the file with information on Loadware resides, e. g. CCA, CCB or ADP (max. 3 characters). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himLWOnProcInfoType |
1.3.6.1.4.1.4329.2.51.6.5.1.1.3 |
This field contains the boot type. It represents the file name also. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himLWOnProcLWId |
1.3.6.1.4.1.4329.2.51.6.5.1.1.4 |
This field contains the name of the loadware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himLWOnProcLWIdCMP |
1.3.6.1.4.1.4329.2.51.6.5.1.1.5 |
This field contains the name of the loadware ID for the CMP. This field contains the '-' character if it is not relevant to this board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himLWOnProcLWIdLP |
1.3.6.1.4.1.4329.2.51.6.5.1.1.6 |
This field contains the name of the loadware ID for the LP. This field contains the '-' character if it is not relevant to this board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himLWOnCSIUTable |
1.3.6.1.4.1.4329.2.51.6.6.1 |
This table contains the loadware data on the central SIU (Signaling Interface Unit). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimLWOnCSIUEntry |
|
himLWOnCSIUEntry |
1.3.6.1.4.1.4329.2.51.6.6.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimLWOnCSIUEntry |
|
|
himLWOnCSIUNominal |
1.3.6.1.4.1.4329.2.51.6.6.1.1.2 |
This field contains the name of the nominal SIU (Signaling Interface Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..14) |
|
himLWOnCSIULWNo |
1.3.6.1.4.1.4329.2.51.6.6.1.1.3 |
This field contains the name of the SIU (Signaling Interface Unit) loadware. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himLWOnCSIUProc |
1.3.6.1.4.1.4329.2.51.6.6.1.1.4 |
This field contains the name of the processor in the SIU (Signaling Interface Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himLWOnCSIUSlot |
1.3.6.1.4.1.4329.2.51.6.6.1.1.5 |
This field contains the name of the SIU (Signaling Interface Unit) slot. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himLWOnCSIUActual |
1.3.6.1.4.1.4329.2.51.6.6.1.1.6 |
This field contains the name of the current SIU (Signaling Interface Unit). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..14) |
|
himLWOnCSIUFileName |
1.3.6.1.4.1.4329.2.51.6.6.1.1.7 |
This field contains the file name of the loadware file or of the initialization file. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..32) |
|
himLWOnCSIUFileProd |
1.3.6.1.4.1.4329.2.51.6.6.1.1.8 |
This field contains the date on which the loadware or the initialization file was generated. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..20) |
|
himMacAddrTable |
1.3.6.1.4.1.4329.2.51.6.7.1 |
This table contains the C-LAN and IPDA MAC addresses which are read during the boot process. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimMacAddrEntry |
|
himMacAddrEntry |
1.3.6.1.4.1.4329.2.51.6.7.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimMacAddrEntry |
|
|
himMacAddrProc |
1.3.6.1.4.1.4329.2.51.6.7.1.1.2 |
This field contains the name of the processor (CCA, CCB or ADP - max 3 characters). It is also the name of the Unix directory where the file with information on MAC address resides. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himMacAddrInfoType |
1.3.6.1.4.1.4329.2.51.6.7.1.1.3 |
This field contains the condition on which the mac addresses are available. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himMacAddrCLan |
1.3.6.1.4.1.4329.2.51.6.7.1.1.4 |
This field contains the MAC address for UW7 part. The format is following: 'xx xx xx xx xx xx'. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
himMacAddrIPDA |
1.3.6.1.4.1.4329.2.51.6.7.1.1.5 |
This field contains the MAC address for RMX part. The format is following: 'xx xx xx xx xx xx'. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
himMarkFeatEntry |
1.3.6.1.4.1.4329.2.51.7.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimMarkFeatEntry |
|
|
himMarkFeatVer |
1.3.6.1.4.1.4329.2.51.7.1.1.1.2 |
This field contains the version of the software package.
Format explanation:
H 2 04
| |__SW version (01=EV1.0; 02=EV2.0; 03=EV3.0; 04=HiPath 4000 V1.0; 05=HiPath 4000 V2.0; 06=HiPath 4000 V3.0)
|
|_____Marketing concept (1=Old, 2=New) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..4) |
|
himMarkFeatSerNo |
1.3.6.1.4.1.4329.2.51.7.1.1.1.3 |
This field contains the serial number of the software package. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himMarkFeatHWId |
1.3.6.1.4.1.4329.2.51.7.1.1.1.4 |
This field contains the dongle ID of the hardware dongle connected. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himMarkFeatInstallDate |
1.3.6.1.4.1.4329.2.51.7.1.1.1.5 |
This field contains the date on which the code word was entered. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himMarkFeatExpiryDate |
1.3.6.1.4.1.4329.2.51.7.1.1.1.6 |
This field contains the date on which the code word will expire. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himMarkFeatConfCode |
1.3.6.1.4.1.4329.2.51.7.1.1.1.7 |
This field contains codeword entry confirmation code. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himMarkFeatTrialModeAct |
1.3.6.1.4.1.4329.2.51.7.1.1.1.8 |
This field shows whether trial mode is active.
Possible values:
- yes - trial mode is activated
- no - trial mode is not activated |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimYesNo |
|
|
himMarkFeatTrialRemDays |
1.3.6.1.4.1.4329.2.51.7.1.1.1.9 |
This field contains number of remaining days of an active trial mode. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himSalesFeatEntry |
1.3.6.1.4.1.4329.2.51.7.1.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSalesFeatEntry |
|
|
himSalesFeatMarketPackId |
1.3.6.1.4.1.4329.2.51.7.1.2.1.2 |
This column contains the CM ids of the marketing packages. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSalesFeatMarketPack |
1.3.6.1.4.1.4329.2.51.7.1.2.1.3 |
This column contains the names of the marketing packages. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..50) |
|
himSalesFeatContract |
1.3.6.1.4.1.4329.2.51.7.1.2.1.4 |
This column indicates whether the marketing packages have been purchased. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himSalesFeatUsed |
1.3.6.1.4.1.4329.2.51.7.1.2.1.5 |
This column indicates whether the marketing packages have been used. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himSalesFeatFree |
1.3.6.1.4.1.4329.2.51.7.1.2.1.6 |
This field contains the number of free packages. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himSalesFeatMarkForTrial |
1.3.6.1.4.1.4329.2.51.7.1.2.1.7 |
This field contains the number of packages (entites) marked for trial or blocked (if the trial mode is not active). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..5) |
|
himTechFeatEntry |
1.3.6.1.4.1.4329.2.51.7.2.1.1 |
This table contains all enabled and disabled customer-specific features. Use the Object List view to display a list of all features availavle. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimTechFeatEntry |
|
|
himTechFeatId |
1.3.6.1.4.1.4329.2.51.7.2.1.1.2 |
This field contains the CM id of the customer-specific feature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himTechFeatName |
1.3.6.1.4.1.4329.2.51.7.2.1.1.3 |
This field contains the name of the customer-specific feature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..70) |
|
himTechFeatState |
1.3.6.1.4.1.4329.2.51.7.2.1.1.4 |
This field contains the status of the customer-specific feature. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimYesNo |
|
|
himSwitchAPSEntry |
1.3.6.1.4.1.4329.2.51.8.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSwitchAPSEntry |
|
|
himSwitchAPSName |
1.3.6.1.4.1.4329.2.51.8.1.1.1.2 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSwitchAPSCorrVer |
1.3.6.1.4.1.4329.2.51.8.1.1.1.3 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSwitchAPSPartNo |
1.3.6.1.4.1.4329.2.51.8.1.1.1.4 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..17) |
|
himReplAMOTable |
1.3.6.1.4.1.4329.2.51.8.2.1 |
This table displays those AMOs that have been changed since the last system correction version. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimReplAMOEntry |
|
himReplAMOEntry |
1.3.6.1.4.1.4329.2.51.8.2.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimReplAMOEntry |
|
|
himReplAMOAPS |
1.3.6.1.4.1.4329.2.51.8.2.1.1.2 |
The APS in which the change has been made. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himReplAMOName |
1.3.6.1.4.1.4329.2.51.8.2.1.1.3 |
This field contains the name of the AMO command. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himReplAMOInAPSDir |
1.3.6.1.4.1.4329.2.51.8.2.1.1.4 |
This field contains the name of the subsystem in the DIR file. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..22) |
|
himReplAMOSubsystem |
1.3.6.1.4.1.4329.2.51.8.2.1.1.5 |
This field contains the name of the current subsystem. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..22) |
|
himPatchInfoTable |
1.3.6.1.4.1.4329.2.51.8.3.1 |
This table contains information on the software patches that have been implemented. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimPatchInfoEntry |
|
himPatchInfoEntry |
1.3.6.1.4.1.4329.2.51.8.3.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimPatchInfoEntry |
|
|
himPatchInfoPatchNo |
1.3.6.1.4.1.4329.2.51.8.3.1.1.2 |
This field contains the number of the patch. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..12) |
|
himPatchInfoPatchGroup |
1.3.6.1.4.1.4329.2.51.8.3.1.1.3 |
This field contains the name of the patch group. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himPatchInfoOpt |
1.3.6.1.4.1.4329.2.51.8.3.1.1.4 |
This field represents an indicator that the patch is:
- optional: not part of patch packet,
- not optional: a part of patch packet (represents the whole list of internal
activated/deactivated patches).
The purpose of this field is to give user an option to display all patches as well as only optional ones. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimYesNo |
|
|
himPatchInfoActHD |
1.3.6.1.4.1.4329.2.51.8.3.1.1.5 |
This field indicates whether the patch is enabled on the hard disk. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himPatchInfoActADP |
1.3.6.1.4.1.4329.2.51.8.3.1.1.6 |
This field indicates whether the patch is enabled on the ADP. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himPatchInfoActBP |
1.3.6.1.4.1.4329.2.51.8.3.1.1.7 |
This field indicates whether the patch is enabled on the A/B processor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWVerOnProcTable |
1.3.6.1.4.1.4329.2.51.9.1 |
This table contains data on the software versions loaded on the processor boards. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSWVerOnProcEntry |
|
himSWVerOnProcEntry |
1.3.6.1.4.1.4329.2.51.9.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSWVerOnProcEntry |
|
|
himSWVerOnProcSrc |
1.3.6.1.4.1.4329.2.51.9.1.1.2 |
This field contains the name of the software source. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSWVerOnProcSWVer |
1.3.6.1.4.1.4329.2.51.9.1.1.3 |
This field contains the name of the software version of the ADP software.
The software version is displayed in the following format:
[item-code-prefix][hipath-version][release-no][country-id][country-code][revision-no]
e. g.
P30252N 43 08 B 000 10 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..17) |
|
himSWVerOnProcItemCodeNoPrefix |
1.3.6.1.4.1.4329.2.51.9.1.1.4 |
This field contains the prefix of the software. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSWVerOnProcHP4KVer |
1.3.6.1.4.1.4329.2.51.9.1.1.5 |
This field contains the Hicom/HiPath version. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWVerOnProcSysRel |
1.3.6.1.4.1.4329.2.51.9.1.1.6 |
This field contains the system release number. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWVerOnProcCountry |
1.3.6.1.4.1.4329.2.51.9.1.1.7 |
This field contains the country identifier. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himSWVerOnProcCountryCode |
1.3.6.1.4.1.4329.2.51.9.1.1.8 |
This field contains the country encoding. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..3) |
|
himSWVerOnProcRevNo |
1.3.6.1.4.1.4329.2.51.9.1.1.9 |
This field contains the revision number of the ADP software. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..2) |
|
himSWPkgVerTable |
1.3.6.1.4.1.4329.2.51.10.1 |
This table contains the software versions of the service functions. This data is retrieved using the UNIX command pgkinfo -l. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSWPkgVerEntry |
|
himSWPkgVerEntry |
1.3.6.1.4.1.4329.2.51.10.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSWPkgVerEntry |
|
|
himSWPkgVerPkgAbbr |
1.3.6.1.4.1.4329.2.51.10.1.1.2 |
This field contains the abbreviation of the software package. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..16) |
|
himSWPkgVerPkgName |
1.3.6.1.4.1.4329.2.51.10.1.1.3 |
This field contains the name of the software package. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..50) |
|
himSWPkgVerVersion |
1.3.6.1.4.1.4329.2.51.10.1.1.4 |
This field contains the version of the software package. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..6) |
|
himSWPkgVerInstAt |
1.3.6.1.4.1.4329.2.51.10.1.1.5 |
This field contains the date on which the software package was installed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..20) |
|
himSWPkgVerStatus |
1.3.6.1.4.1.4329.2.51.10.1.1.6 |
This field contains the status of the software package. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
partial(1), complete(2), other(0) |
|
himSystem |
1.3.6.1.4.1.4329.2.51.11 |
OBJECT IDENTIFIER |
|
|
|
himSysBasicTable |
1.3.6.1.4.1.4329.2.51.11.1 |
This table complements the information about the HiPath 4000 system that is stored in the hicomSystem branch of the hicom MIB. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimSysBasicEntry |
|
himSysBasicEntry |
1.3.6.1.4.1.4329.2.51.11.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSysBasicEntry |
|
|
himSysBasicDomain |
1.3.6.1.4.1.4329.2.51.11.1.1.2 |
This field contains the name of the domain to which the system is belonging. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himSysBasicNodeNo |
1.3.6.1.4.1.4329.2.51.11.1.1.3 |
HiPath node number.
This field contains the globally unique number of your own PABX. This has a hierarchical structure containing different levels in Version V1.0 and later.
Up to three values of the format:
L2- L1- L0 can be used for numbering a system.
- L2: area number in level 2
- L1: area number in level 1
- L0: area number in level 0 or node number in the old sense.
If the value '0' is selected for a level, this means that the relevant hierarchical level is not being used for node numbering: '0' is equal to 'nothing' or 'level is not set'.
With the help of this new node number format it is now possible to implement node numbers in networks in which - just as with dial numbers - the network hierarchy is reflected in the node numbers.
The same numbering level (= number of levels set in the node number) must be used for all nodes in a network.
This field will always show a three-level display with leading zeroes for levels not used for systems in Version V1.0 and later.
Example:
- 0-0-100 for 1-level numbering
- 0-1-101 for 2-level numbering
- 1-2-300 for 3-level numbering
Values: 0-9 and '-' with format 22-111-000
Level 0 (000) 0-999
Level 1 (111) 0-253
Level 2 (22) 0-29
Max. 10 digits |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himSysBasicLEGK |
1.3.6.1.4.1.4329.2.51.11.1.1.4 |
This field tells if the 'LEGK' feature is activated on the system.
LEGK is a process within the call processing of HiPath 4000 with the following functions:
- Gate keeper function: IP address resolution mechanism for IP trunking requiring the HG3550 board as hardware.
- Resource Management: This function monitors network component usage for controlling IP trunking, IPDA scenarios, HFA and direct media connections.
The LEGK can be activated at every HiPath 4000 in the network. Alternatively, it can be configured on a specific HiPath 4000 system only. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimYesNo |
|
|
himSysLANCardsEntry |
1.3.6.1.4.1.4329.2.51.11.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSysLANCardsEntry |
|
|
himSysLANCardsIPAddr |
1.3.6.1.4.1.4329.2.51.11.2.1.2 |
Unique IP address within the Customer LAN. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himSysLANCardsNetMask |
1.3.6.1.4.1.4329.2.51.11.2.1.3 |
The netmask of the LAN card. It depends on the class of the LAN Card address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himSysLANCardsBroadCast |
1.3.6.1.4.1.4329.2.51.11.2.1.4 |
The broadcast address is used to send a datagram packet to all hosts of a network or subnetwork, e.g. for address propagation from a router.
The broadcast address also depends on the LAN Card address. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himSysLANCardsType |
1.3.6.1.4.1.4329.2.51.11.2.1.5 |
Type of the LAN card. Possible values are Ethernet and Token Ring. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ethernet(1), tokenring(2), other(0) |
|
himSysLANCardsStatus |
1.3.6.1.4.1.4329.2.51.11.2.1.6 |
The status of the configured LAN card. Can be one of the following:
- Unknown (no traffic light lit): The LAN Card is configured, but no reboot has been performed.
- Enabled (green traffic light lit): The LAN Card is active.
- Disabled (red traffic light lit): The LAN Card is not active. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2), stale(3), configured(4), unconfigured(5), other(0) |
|
himSysHostsEntry |
1.3.6.1.4.1.4329.2.51.11.3.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSysHostsEntry |
|
|
himSysHostsNo |
1.3.6.1.4.1.4329.2.51.11.3.1.2 |
Index of the host entry. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..2147483647 |
|
himSysHostsIPAddr |
1.3.6.1.4.1.4329.2.51.11.3.1.3 |
The IP address of the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himSysHostsName |
1.3.6.1.4.1.4329.2.51.11.3.1.4 |
Unique name of the host. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..50) |
|
himSysWAMLConnEntry |
1.3.6.1.4.1.4329.2.51.11.4.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSysWAMLConnEntry |
|
|
himSysWAMLConnLTG |
1.3.6.1.4.1.4329.2.51.11.4.1.1.2 |
Line/trunk group number.
Valid values: 1-1 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1 |
|
himSysWAMLConnLTU |
1.3.6.1.4.1.4329.2.51.11.4.1.1.3 |
Line/trunk unit.
Valid values:
1-15, for
IP Gateway
DSP HW of NCUI
STMI
STMA
WAML
1-99, for
RG/ACGEN
PER
DIU
SIUP
TMD
17-99, for
NCUI
STMA
WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..99 |
|
himSysWAMLConnSlot |
1.3.6.1.4.1.4329.2.51.11.4.1.1.4 |
Slot number of LTU (Line/Trunk Unit).
Valid values:
1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD
1-145, for STMA, WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..145 |
|
himSysWAMLConnBChl |
1.3.6.1.4.1.4329.2.51.11.4.1.1.6 |
Number of b-channels on the WAML board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Unsigned32 |
|
|
himSysWAMLConnStatus |
1.3.6.1.4.1.4329.2.51.11.4.1.1.7 |
Status of the WAML board. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himSysWAMLConnIPEntry |
1.3.6.1.4.1.4329.2.51.11.4.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimSysWAMLConnIPEntry |
|
|
himSysWAMLConnIPLTG |
1.3.6.1.4.1.4329.2.51.11.4.2.1.2 |
Line/trunk group number.
Valid values: 1-1 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1 |
|
himSysWAMLConnIPLTU |
1.3.6.1.4.1.4329.2.51.11.4.2.1.3 |
Line/trunk unit.
Valid values:
1-15, for
IP Gateway
DSP HW of NCUI
STMI
STMA
WAML
1-99, for
RG/ACGEN
PER
DIU
SIUP
TMD
17-99, for
NCUI
STMA
WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..99 |
|
himSysWAMLConnIPSlot |
1.3.6.1.4.1.4329.2.51.11.4.2.1.4 |
Slot number of LTU (Line/Trunk Unit).
Valid values:
1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD
1-145, for STMA, WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..145 |
|
himSysWAMLConnIPIfName |
1.3.6.1.4.1.4329.2.51.11.4.2.1.5 |
Name of the interface. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..8) |
|
himBoards |
1.3.6.1.4.1.4329.2.51.12 |
OBJECT IDENTIFIER |
|
|
|
himBoardBasicTable |
1.3.6.1.4.1.4329.2.51.12.1 |
This table contains the boards that are managed by CM.
It can be viewed as an extension of hicomBCSUTable. Please note that the PEN (LTG, LTU, Slot) of LTU boards is different from what is contained in CM, and uses the same format as in the hicom MIB. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimBoardBasicEntry |
|
himBoardBasicEntry |
1.3.6.1.4.1.4329.2.51.12.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimBoardBasicEntry |
|
|
himBoardBasicLTG |
1.3.6.1.4.1.4329.2.51.12.1.1.2 |
Line/trunk group number.
Valid values: 1-1 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1 |
|
himBoardBasicLTU |
1.3.6.1.4.1.4329.2.51.12.1.1.3 |
Line/trunk unit.
Valid values:
1-15, for
IP Gateway
DSP HW of NCUI
STMI
STMA
WAML
1-99, for
RG/ACGEN
PER
DIU
SIUP
TMD
17-99, for
NCUI
STMA
WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..99 |
|
himBoardBasicSlot |
1.3.6.1.4.1.4329.2.51.12.1.1.4 |
Slot number of LTU (Line/Trunk Unit).
Valid values:
1-121, for STMI, IP gateway, PER, RG, ACGEN, DIU, SIUP, TMD
1-145, for STMA, WAML |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..145 |
|
himBoardBasicFuncId |
1.3.6.1.4.1.4329.2.51.12.1.1.5 |
Function ID
Valid values: 0-255
2 for SIU type 2 (MFV)
3 for SIU type 3 (MFC)
4 for SIU - RDS functionality
5 for SIU - ANI signaling
6 for SIU - CIS multifrequency (MFS)
7 for SIU - line testing |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
himBoardBasicCat |
1.3.6.1.4.1.4329.2.51.12.1.1.6 |
Category
The board type includes:
LTG -- line/trunk group
LTU -- line/trunk unit
PER -- peripheral module
PERHW -- load peripheral hardware
ACGEN -- alternating current generator
DIU -- digital interface unit
IPGW -- IP gateway
RG -- ring generator
SIUP -- signalling unit periphery
TMD -- T1 boards |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
ltg(1), ltu(2), per(3), perhw(4), acgen(5), diu(6), ipgw(7), rg(8), siup(9), tmd(10), other(0) |
|
himBoardBasicName |
1.3.6.1.4.1.4329.2.51.12.1.1.7 |
Name of the setup the board is configured to. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..10) |
|
himBoardBasicLWVar |
1.3.6.1.4.1.4329.2.51.12.1.1.9 |
The loadware variant.
Default value: 0
Valid values: 0-9, A-D |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..1) |
|
himBoardBasicNoCirc |
1.3.6.1.4.1.4329.2.51.12.1.1.10 |
Number of circuits to be configured.
Valid values: 1-255 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..255 |
|
himBoardIPTable |
1.3.6.1.4.1.4329.2.51.12.2 |
This table contains the IP address configuration of the boards.
Please note that not all fields are used for all boards. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimBoardIPEntry |
|
himBoardIPEntry |
1.3.6.1.4.1.4329.2.51.12.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimBoardIPEntry |
|
|
himBoardIPGwyIPAddr |
1.3.6.1.4.1.4329.2.51.12.2.1.1 |
IP address of the gateway.
Valid for: STMI |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPSrcIPAddr |
1.3.6.1.4.1.4329.2.51.12.2.1.2 |
Source IP address of STMI-HFA board.
A valid Source IP address must always be specified in order to enable the IP phones to address the system (SWU)
Default: 0.0.0.0
Valid for: HFA |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPNetMask |
1.3.6.1.4.1.4329.2.51.12.2.1.3 |
IP network mask.
Valid for: HFA |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPDefRouter |
1.3.6.1.4.1.4329.2.51.12.2.1.4 |
IP address of the default router within the LAN segment.
The default router takes care of routing forward all packets with a destination address with a network part different from the own LAN segment.
Default: 0.0.0.0
Valid for: HFA |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPCustLANIP |
1.3.6.1.4.1.4329.2.51.12.2.1.5 |
IP address of customer LAN.
Default: 0.0.0.0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPSTMI2IGWSubMask |
1.3.6.1.4.1.4329.2.51.12.2.1.6 |
IP subnet mask of LAN segment.
Default: 0.0.0.0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPDefGWIP |
1.3.6.1.4.1.4329.2.51.12.2.1.7 |
Default gateway IP address.
Default: 0.0.0.0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPManStatIP |
1.3.6.1.4.1.4329.2.51.12.2.1.8 |
IP address of management station.
Default: 0.0.0.0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPManStatPort |
1.3.6.1.4.1.4329.2.51.12.2.1.9 |
Port number of management station.
Valid values: 1024 - 65535
Default: 0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1024..65535 |
|
himBoardIPBckpServIP |
1.3.6.1.4.1.4329.2.51.12.2.1.10 |
IP address of backup server.
Default: 0.0.0.0
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himBoardIPBckpServPort |
1.3.6.1.4.1.4329.2.51.12.2.1.11 |
Port number of backup server.
Default: 0 (0 means 'undefined port number')
Valid for: IGW, SIP |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
himBoardLocTable |
1.3.6.1.4.1.4329.2.51.12.3 |
This table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimBoardLocEntry |
|
himBoardLocEntry |
1.3.6.1.4.1.4329.2.51.12.3.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimBoardLocEntry |
|
|
himBoardLocId |
1.3.6.1.4.1.4329.2.51.12.3.1.1 |
Describes the location of the switch for the system configurator.
Valid values: 0-999 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..999 |
|
himBoardLocLoc |
1.3.6.1.4.1.4329.2.51.12.3.1.2 |
Postal address of the LTU (Line/Trunk Unit) shelf.
Applies to the Local Connection Type.
Valid values: text, up to 45 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..45) |
|
himBoardLocPhoneNo |
1.3.6.1.4.1.4329.2.51.12.3.1.3 |
Phone number at the shelf location.
Valid values: 0-9, *, #, A-D, up to 22 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPhoneNumber |
|
|
himBoardLocFaxNo |
1.3.6.1.4.1.4329.2.51.12.3.1.4 |
Fax number at the shelf location.
Valid values: 0-9, *, #, A-D, up to 22 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPhoneNumber |
|
|
himIPDA |
1.3.6.1.4.1.4329.2.51.13 |
OBJECT IDENTIFIER |
|
|
|
himIPDAGenTable |
1.3.6.1.4.1.4329.2.51.13.1.1 |
General settings that are true for all IPDAs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimIPDAGenEntry |
|
himIPDAGenEntry |
1.3.6.1.4.1.4329.2.51.13.1.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimIPDAGenEntry |
|
|
himIPDAGenSpeed |
1.3.6.1.4.1.4329.2.51.13.1.1.1.2 |
Indicates the bit-rate speed.
Valid values: 10 Mbits/s; 100 Mbits/s |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
10 | 100 |
|
himIPDAGenMode |
1.3.6.1.4.1.4329.2.51.13.1.1.1.3 |
Indicates the bit-rate mode.
Valid values: Full Duplex, Half Duplex |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
fullduplex(1), halfduplex(2), other(3) |
|
himIPDAGenPayConn |
1.3.6.1.4.1.4329.2.51.13.1.1.1.4 |
TOS for VoIP payload connections to APs (CP).
Valid values: 0-255 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
himIPDAGenSigConn |
1.3.6.1.4.1.4329.2.51.13.1.1.1.5 |
TOS for signalling connections to APs (FA).
Valid values: 0-255 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..255 |
|
himIPDAGenIPTable |
1.3.6.1.4.1.4329.2.51.13.1.2 |
General IP settings that are true for all IPDAs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimIPDAGenIPEntry |
|
himIPDAGenIPEntry |
1.3.6.1.4.1.4329.2.51.13.1.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimIPDAGenIPEntry |
|
|
himIPDAGenIPNetAddr |
1.3.6.1.4.1.4329.2.51.13.1.2.1.1 |
IP net address of HiPath LAN segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAGenIPNetMask |
1.3.6.1.4.1.4329.2.51.13.1.2.1.2 |
IP net mask of HiPath LAN segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAGenIPCCAAddr |
1.3.6.1.4.1.4329.2.51.13.1.2.1.3 |
Address of the CC-A processor within the HiPath LAN segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAGenIPCCBAddr |
1.3.6.1.4.1.4329.2.51.13.1.2.1.4 |
Address of the CC-B processor within the HiPath LAN segment.
Default value: 0.0.0.0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAGenIPDefRoutAddr |
1.3.6.1.4.1.4329.2.51.13.1.2.1.5 |
IP address of the default router within the HiPath LAN segment. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAGenIPSurvNetAddr |
1.3.6.1.4.1.4329.2.51.13.1.2.1.6 |
The IP address of the survivability net.
Default value: 0.0.0.0 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDABasicTable |
1.3.6.1.4.1.4329.2.51.13.2.1 |
This table stores IPDA information from CM. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimIPDABasicEntry |
|
himIPDABasicEntry |
1.3.6.1.4.1.4329.2.51.13.2.1.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimIPDABasicEntry |
|
|
himIPDABasicLTU |
1.3.6.1.4.1.4329.2.51.13.2.1.1.2 |
Line/trunk unit.
Valid values: 17-99 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
17..99 |
|
himIPDABasicConnType |
1.3.6.1.4.1.4329.2.51.13.2.1.1.3 |
Connection type of the shelf.
Valid values:
APDL -- AP shelf via IP - direct linked
APNW -- AP shelf via IP - network |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimShelfNWType |
0 | 3..4 |
|
himIPDABasicBChanNo |
1.3.6.1.4.1.4329.2.51.13.2.1.1.4 |
Amount of B-Channels.
Valid values: 1- 120 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
1..120 |
|
himIPDAIPTable |
1.3.6.1.4.1.4329.2.51.13.2.2 |
This table contains the IP address configuration of the IPDAs. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimIPDAIPEntry |
|
himIPDAIPEntry |
1.3.6.1.4.1.4329.2.51.13.2.2.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimIPDAIPEntry |
|
|
himIPDAIPAccPtAddr |
1.3.6.1.4.1.4329.2.51.13.2.2.1.1 |
IP address of the access point in the AP network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAIPTAccPtAddr |
1.3.6.1.4.1.4329.2.51.13.2.2.1.2 |
IP address for the TAP/Service PC link at the access point.
This IP address must be in the same network as the access point in the AP network. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAIPAccPtRoutAddr |
1.3.6.1.4.1.4329.2.51.13.2.2.1.3 |
IP address of the gateway (IP address of the router in the AP network). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAIPNetMaskNW |
1.3.6.1.4.1.4329.2.51.13.2.2.1.4 |
Netmask of the network to which the respective Access Point in AP network belongs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAIPAccPtPriRoutAddr |
1.3.6.1.4.1.4329.2.51.13.2.2.1.5 |
IP address of the primary signalling router for NCUI board (IP address of the router in the HiPath 4000 LAN segment). Required if the connection type is APDL. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDAIPNetMaskDL |
1.3.6.1.4.1.4329.2.51.13.2.2.1.6 |
Netmask of the network to which the Access Point in AP internal network belongs. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
himIPDALocTable |
1.3.6.1.4.1.4329.2.51.13.2.3 |
This table contains the location data of the boards. It is only available for boards of type DSX, LTUCA, LTUCE and LTUCX. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimIPDALocEntry |
|
himIPDALocEntry |
1.3.6.1.4.1.4329.2.51.13.2.3.1 |
Tok_String |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimIPDALocEntry |
|
|
himIPDALocId |
1.3.6.1.4.1.4329.2.51.13.2.3.1.1 |
Describes the location of the switch for the system configurator.
Valid values: 0-999 |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..999 |
|
himIPDALocLoc |
1.3.6.1.4.1.4329.2.51.13.2.3.1.2 |
Postal address of the LTU (Line/Trunk Unit) shelf.
Applies to the Local Connection Type.
Valid values: text, up to 45 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
Size(0..45) |
|
himIPDALocPhoneNo |
1.3.6.1.4.1.4329.2.51.13.2.3.1.3 |
Phone number at the shelf location.
Valid values: 0-9, *, #, A-D, up to 22 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPhoneNumber |
|
|
himIPDALocFaxNo |
1.3.6.1.4.1.4329.2.51.13.2.3.1.4 |
Fax number at the shelf location.
Valid values: 0-9, *, #, A-D, up to 22 characters |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPhoneNumber |
|
|
himInfo |
1.3.6.1.4.1.4329.2.51.14 |
OBJECT IDENTIFIER |
|
|
|
himSubagentLastMsgNo |
1.3.6.1.4.1.4329.2.51.14.1 |
The last message, warning or error number
issued by the Him subagent. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himSubagentLastMsgText |
1.3.6.1.4.1.4329.2.51.14.2 |
The last message, warning or error text
issued by the Him subagent. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OCTET STRING |
|
|
himResultData |
1.3.6.1.4.1.4329.2.51.14.3 |
Is used for agent internal communication.
Contains the PabxId of a Hicom for which
the last discovery process was conveyed.
Is SET by the discovery agent and
indicates the availability of new discovered data.
The new data is to be incorporated by the subagent
into the subagent's data base. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himChanges |
1.3.6.1.4.1.4329.2.51.15.1 |
Indicates the number of finished HIM discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Counter32 |
|
|
himDiscovTable |
1.3.6.1.4.1.4329.2.51.15.2 |
The table describing the status concerning
discovery of HIM information. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HimDiscovEntry |
|
himDiscovEntry |
1.3.6.1.4.1.4329.2.51.15.2.1 |
The entry describes the status of the discovery process. It is designed to comply with the structure of discovery entries in the hicom MIB, even though data is only provided for one switch. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HimDiscovEntry |
|
|
himDiscovPabxId |
1.3.6.1.4.1.4329.2.51.15.2.1.1 |
Unique identifier of the Hicom being discovered. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
HimPabxId |
|
|
himDiscovStatus |
1.3.6.1.4.1.4329.2.51.15.2.1.3 |
Status of discovery process.
A managment station may initiate a discovery by setting
this variable to value busy.
The other values are set by the agent. |
Status: current |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DiscoveryStates |
|
|
himDiscovTimDat |
1.3.6.1.4.1.4329.2.51.15.2.1.5 |
Date and time (year, month, day, hour, minute, second)
the last successful discovery action was performed for the Hicom. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
himDiscovErrTimDat |
1.3.6.1.4.1.4329.2.51.15.2.1.6 |
Date and time (year, month, day, hour, minute, second)
the last failed discovery action was performed for the Hicom. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
himWelcomePageGroup |
1.3.6.1.4.1.4329.2.51.20.1.1 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSwitchDataGroup |
1.3.6.1.4.1.4329.2.51.20.1.2 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSpecGroup |
1.3.6.1.4.1.4329.2.51.20.1.3 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSWUPeripheryGroup |
1.3.6.1.4.1.4329.2.51.20.1.4 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himCentralSwitchGroup |
1.3.6.1.4.1.4329.2.51.20.1.5 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himGeneralSwitchGroup |
1.3.6.1.4.1.4329.2.51.20.1.6 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himFeaturesGroup |
1.3.6.1.4.1.4329.2.51.20.1.7 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himAPSPatchesGroup |
1.3.6.1.4.1.4329.2.51.20.1.8 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSWVersionGroup |
1.3.6.1.4.1.4329.2.51.20.1.9 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSWPkgVersionGroup |
1.3.6.1.4.1.4329.2.51.20.1.10 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himSystemGroup |
1.3.6.1.4.1.4329.2.51.20.1.11 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himBoardsGroup |
1.3.6.1.4.1.4329.2.51.20.1.12 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himIPDAGroup |
1.3.6.1.4.1.4329.2.51.20.1.13 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himInfoGroup |
1.3.6.1.4.1.4329.2.51.20.1.14 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himDiscoveryGroup |
1.3.6.1.4.1.4329.2.51.20.1.15 |
Tok_String |
Status: current |
Access: read-only |
OBJECT-GROUP |
|
|
|
himTrapsGroup |
1.3.6.1.4.1.4329.2.51.20.1.16 |
Tok_String |
Status: current |
Access: read-only |
NOTIFICATION-GROUP |
|
|
|
himTrapPabxId |
1.3.6.1.4.1.4329.2.51.21.1.1 |
Unique identifier of a Hicom system. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
himTraps |
1.3.6.1.4.1.4329.2.51.21.2 |
OBJECT IDENTIFIER |
|
|
|
internalMessageHimSubagent |
1.3.6.1.4.1.4329.2.51.21.2.0 |
An internalMessage trap contains an informational
message generated by the subagent. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|
internalWarningHimSubagent |
1.3.6.1.4.1.4329.2.51.21.2.1 |
An internalWarning trap contains a warning message
generated by a subagent. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|
internalErrorHimSubagent |
1.3.6.1.4.1.4329.2.51.21.2.2 |
An internalError trap contains an error message
generated by a subagent.
After issuing this trap, the agent terminates. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|
himDiscovSucc |
1.3.6.1.4.1.4329.2.51.21.2.10 |
A himDiscovSucc trap indicates the
successful termination of a discovery process. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|
himDiscovErr |
1.3.6.1.4.1.4329.2.51.21.2.11 |
A himDiscovErr trap signifies the
unsuccessful termination of a discovery process. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|
himDiscovBusy |
1.3.6.1.4.1.4329.2.51.21.2.19 |
A himDiscovBusy trap signifies
that a sw discovery process is running. |
Status: current |
Access: not-accessible |
NOTIFICATION-TYPE |
|
|
|