RT-AC68U-MIB

File: RT-AC68U-MIB.mib (268458 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC RFC1155-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 DisplayString
MacAddress RowStatus TruthValue
private IpAddress TimeTicks

Defined Types

Wl2gWepKeyEntry  
SEQUENCE    
  wepKeyIndexWl2g INTEGER
  wepKeyValueWl2g OCTET STRING

WbBridgeAPScanEntryWl2g  
SEQUENCE    
  wbAPResultIndexWl2g INTEGER
  wbAPResultBSSIDWl2g OCTET STRING
  wbAPResultSSIDWl2g OCTET STRING

WBRemoteAPEntryWl2g  
SEQUENCE    
  wbRemoteAPIndexWl2g INTEGER
  wbRemoteAPMACAddrWl2g MacAddress
  wbRemoteAPDelEntryWl2g INTEGER

MacFilterEntryWl2g  
SEQUENCE    
  macFilterIndexWl2g INTEGER
  macFilterMACAddrWl2g MacAddress
  macFilterDelEntryWl2g INTEGER

WepKeyEntryWl5g  
SEQUENCE    
  wepKeyIndexWl5g INTEGER
  wepKeyValueWl5g OCTET STRING

WbBridgeAPScanEntryWl5g  
SEQUENCE    
  wbAPResultIndexWl5g INTEGER
  wbAPResultBSSIDWl5g OCTET STRING
  wbAPResultSSIDWl5g OCTET STRING

WBRemoteAPEntryWl5g  
SEQUENCE    
  wbRemoteAPIndexWl5g INTEGER
  wbRemoteAPMACAddrWl5g MacAddress
  wbRemoteAPDelEntryWl5g INTEGER

MacFilterEntryWl5g  
SEQUENCE    
  macFilterIndexWl5g INTEGER
  macFilterMACAddrWl5g MacAddress
  macFilterDelEntryWl5g INTEGER

DsClientEntry  
SEQUENCE    
  dsClientIndex INTEGER
  dsClientMACAddr OCTET STRING
  dsClientIPAddr IpAddress
  dsClientName OCTET STRING

AssignedIPEntry  
SEQUENCE    
  assignedIPIndex INTEGER
  assignedIPMACAddr MacAddress
  assignedIPIPAddr IpAddress
  assignedIPDelEntry INTEGER

RClientEntry  
SEQUENCE    
  rClientIndex INTEGER
  rClientIPAddr OCTET STRING
  rClientName OCTET STRING

StaticRouteEntry  
SEQUENCE    
  staticRouteIndex INTEGER
  staticRouteIPAddr OCTET STRING
  staticRouteNetmask IpAddress
  staticRouteGateway IpAddress
  staticRouteMetric INTEGER
  staticRouteInterface INTEGER
  staticRouteDelEntry INTEGER

DwRoutingRuleEntry  
SEQUENCE    
  dwRoutingRuleIndex INTEGER
  dwSourceIP IpAddress
  dwDestinationIP IpAddress
  dwWANUnit INTEGER
  dwRoutingRuleDelEntry INTEGER

PortTriggerEntry  
SEQUENCE    
  portTriggerIndex INTEGER
  portTriggerDescription OCTET STRING
  portTriggerPort OCTET STRING
  portTriggerProtocol INTEGER
  portTriggerIncomingPort OCTET STRING
  portTriggerIncomingProtocol INTEGER
  portTriggerDelEntry INTEGER

WClientEntry  
SEQUENCE    
  wClientIndex INTEGER
  wClientIPAddr IpAddress
  wClientName OCTET STRING

PortForwardingEntry  
SEQUENCE    
  portForwardingIndex INTEGER
  portForwardingServiceName OCTET STRING
  portForwardingPortRange OCTET STRING
  portForwardingLocalIP IpAddress
  portForwardingLocalPort INTEGER
  portForwardingProtocol INTEGER
  portForwardingDelEntry INTEGER

VpnUserEntry  
SEQUENCE    
  vpnUserIndex INTEGER
  vpnUserUserName OCTET STRING
  vpnUserPassword OCTET STRING
  vpnConnectionStatus INTEGER
  vpnIp OCTET STRING
  vpnRemoteIp OCTET STRING
  vpnUserDelEntry INTEGER

VpnServerEntry  
SEQUENCE    
  vpnServerIndex INTEGER
  vpnServerDesc OCTET STRING
  vpnServerType INTEGER
  vpnServerIP OCTET STRING
  vpnServerUsername OCTET STRING
  vpnServerPwd OCTET STRING
  vpnServerConnectionStatus INTEGER
  vpnServerDelEntry INTEGER
  vpnServerConnect INTEGER

UrlFilterEntry  
SEQUENCE    
  urlFilterIndex INTEGER
  urlFilterUrl OCTET STRING
  urlFilterDelEntry INTEGER

KeywordFilterEntry  
SEQUENCE    
  keywordFilterIndex INTEGER
  keywordFilterKeyword OCTET STRING
  keywordFilterDelEntry INTEGER

NetworkServicesFilterEntry  
SEQUENCE    
  networkServicesFilterIndex INTEGER
  networkServicesFilterSourceIP IpAddress
  networkServicesFilterSourcePortRange OCTET STRING
  networkServicesFilterDestinationIP IpAddress
  networkServicesFilterDestinationPortRange OCTET STRING
  networkServicesFilterProtocol INTEGER
  networkServicesFilterDelEntry INTEGER

InboundFirewallRulesEntry  
SEQUENCE    
  inboundFirewallRulesIndex INTEGER
  inboundFirewallRulesServiceName OCTET STRING
  inboundFirewallRulesRemoteIP OCTET STRING
  inboundFirewallRulesLocalIP OCTET STRING
  inboundFirewallRulesPortRange OCTET STRING
  inboundFirewallRulesProtocol INTEGER
  inboundFirewallRulesDelEntry INTEGER

MScanClientEntry  
SEQUENCE    
  mScanClientIndex INTEGER
  mScanClientIPAddr IpAddress
  mScanClientName OCTET STRING

MClientListEntry  
SEQUENCE    
  mClientListIndex INTEGER
  mClientListClient IpAddress
  mClientListDelEntry INTEGER

Wl2gStationEntry  
SEQUENCE    
  wl2gStationIndex INTEGER
  wl2gStationMACAddr OCTET STRING
  wl2gAssociated OCTET STRING
  wl2gAuthorized OCTET STRING
  wl2gRSSI OCTET STRING
  wl2gPSM OCTET STRING
  wl2gTxRate OCTET STRING
  wl2gRxRate OCTET STRING
  wl2gStationConnectTime TimeTicks

Wl5gStationEntry  
SEQUENCE    
  wl5gStationIndex INTEGER
  wl5gStationMACAddr OCTET STRING
  wl5gAssociated OCTET STRING
  wl5gAuthorized OCTET STRING
  wl5gRSSI OCTET STRING
  wl5gPSM OCTET STRING
  wl5gTxRate OCTET STRING
  wl5gRxRate OCTET STRING
  wl5gStationConnectTime TimeTicks

DhcpLeasesEntry  
SEQUENCE    
  dhcpLeasesIndex INTEGER
  dhcpLeasesHostName OCTET STRING
  dhcpLeasesIPAddr OCTET STRING
  dhcpLeasesMACAddr OCTET STRING
  dhcpLeasesExpires OCTET STRING

Ipv6LanDeviceEntry  
SEQUENCE    
  ipv6LanDeviceIndex INTEGER
  ipv6LanDeviceHostName OCTET STRING
  ipv6LanDeviceMACAddr OCTET STRING
  ipv6LanDeviceIPv6Addr OCTET STRING

RoutingEntry  
SEQUENCE    
  routingIndex INTEGER
  routingDestination OCTET STRING
  routingGateway OCTET STRING
  routingGenmask OCTET STRING
  routingFlags OCTET STRING
  routingMetric INTEGER
  routingRef INTEGER
  routingUse INTEGER
  routingIface OCTET STRING

Ipv6RoutingEntry  
SEQUENCE    
  ipv6RoutingIndex INTEGER
  ipv6RoutingDest OCTET STRING
  ipv6RoutingNextHop OCTET STRING
  ipv6RoutingFlags OCTET STRING
  ipv6RoutingMetric INTEGER
  ipv6RoutingRef INTEGER
  ipv6RoutingUse INTEGER
  ipv6RoutingIface OCTET STRING

PortForwardingLogEntry  
SEQUENCE    
  portForwardingLogIndex INTEGER
  portForwardingLogDestination OCTET STRING
  portForwardingLogProtocol OCTET STRING
  portForwardingLogPortRange OCTET STRING
  portForwardingLogRedirectTo OCTET STRING
  portForwardingLogLocalPort OCTET STRING

ActiveConnectionEntry  
SEQUENCE    
  activeConnectionIndex INTEGER
  activeConnectionProto OCTET STRING
  activeConnectionNatedAddr OCTET STRING
  activeConnectionDestAddr OCTET STRING
  activeConnectionState OCTET STRING

Wl2gGuestNetworkEntry  
SEQUENCE    
  gIndexWl2g INTEGER
  gEnableWl2g INTEGER
  gSSIDWl2g OCTET STRING
  gAuthenticationWl2g INTEGER
  gWepEncryptionWl2g INTEGER
  gKeyIndexWl2g INTEGER
  gPassphraseWl2g OCTET STRING
  gWpaEncryptionWl2g INTEGER
  gWpaPreSharedKeyWl2g OCTET STRING
  gAccessTimeWl2g INTEGER
  gAccessTimeHWl2g INTEGER
  gAccessTimeMWl2g INTEGER
  gAccessIntranetWl2g INTEGER
  gEnableMacFilterWl2g INTEGER

GWepKeyEntry1Wl2g  
SEQUENCE    
  gWepKeyIndex1Wl2g INTEGER
  gWepKeyValue1Wl2g OCTET STRING

GWepKeyEntry2Wl2g  
SEQUENCE    
  gWepKeyIndex2Wl2g INTEGER
  gWepKeyValue2Wl2g OCTET STRING

GWepKeyEntry3Wl2g  
SEQUENCE    
  gWepKeyIndex3Wl2g INTEGER
  gWepKeyValue3Wl2g OCTET STRING

Wl5gGuestNetworkEntry  
SEQUENCE    
  gIndexWl5g INTEGER
  gEnableWl5g INTEGER
  gSSIDWl5g OCTET STRING
  gAuthenticationWl5g INTEGER
  gWepEncryptionWl5g INTEGER
  gKeyIndexWl5g INTEGER
  gPassphraseWl5g OCTET STRING
  gWpaEncryptionWl5g INTEGER
  gWpaPreSharedKeyWl5g OCTET STRING
  gAccessTimeWl5g INTEGER
  gAccessTimeHWl5g INTEGER
  gAccessTimeMWl5g INTEGER
  gAccessIntranetWl5g INTEGER
  gEnableMacFilterWl5g INTEGER

GWepKeyEntry1Wl5g  
SEQUENCE    
  gWepKeyIndex1Wl5g INTEGER
  gWepKeyValue1Wl5g OCTET STRING

GWl5gSSID2WepKeyEntry  
SEQUENCE    
  gWepKeyIndex2Wl5g INTEGER
  gWepKeyValue2Wl5g OCTET STRING

GWepKeyEntry3Wl5g  
SEQUENCE    
  gWepKeyIndex3Wl5g INTEGER
  gWepKeyValue3Wl5g OCTET STRING

UserSpecifyRuleEntry  
SEQUENCE    
  userSpecifyRuleIndex INTEGER
  userSpecifyRuleServiceName OCTET STRING
  userSpecifyRuleSrcIPorMAC OCTET STRING
  userSpecifyRuleDestPort OCTET STRING
  userSpecifyRuleProtocol INTEGER
  userSpecifyRuleMinTransferred OCTET STRING
  userSpecifyRuleMaxTransferred OCTET STRING
  userSpecifyRulePriority INTEGER
  userSpecifyRuleDelEntry INTEGER

PControlScanEntry  
SEQUENCE    
  pControlScanIndex INTEGER
  pControlScanIPAddr IpAddress
  pControlScanClientName OCTET STRING
  pControlScanClientMac MacAddress

PControlClientEntry  
SEQUENCE    
  pControlClientIndex INTEGER
  pControlEntryEnable INTEGER
  pControlClientName OCTET STRING
  pControlClientMac MacAddress
  pControlSunAllowTime OCTET STRING
  pControlMonAllowTime OCTET STRING
  pControlTueAllowTime OCTET STRING
  pControlWedAllowTime OCTET STRING
  pControlThuAllowTime OCTET STRING
  pControlFriAllowTime OCTET STRING
  pControlSatAllowTime OCTET STRING
  pControlClientDelEntry INTEGER

QAPScanEntry  
SEQUENCE    
  qAPResultIndex INTEGER
  qAPResultBand OCTET STRING
  qAPResultSSID OCTET STRING
  qAPResultChannel INTEGER
  qAPResultAuthentication INTEGER
  qAPResultEncryption INTEGER
  qAPResultRssi INTEGER
  qAPResultBSSID OCTET STRING
  qAPResultMode INTEGER
  qAPResultStatus INTEGER

QmAPScanEntry  
SEQUENCE    
  qmAPResultIndex INTEGER
  qmAPResultBand OCTET STRING
  qmAPResultSSID OCTET STRING
  qmAPResultChannel INTEGER
  qmAPResultAuthentication INTEGER
  qmAPResultEncryption INTEGER
  qmAPResultRssi INTEGER
  qmAPResultBSSID OCTET STRING
  qmAPResultMode INTEGER
  qmAPResultStatus INTEGER

Defined Values

enterprises 1.3.6.1.4.1
OBJECT IDENTIFIER    

asus 1.3.6.1.4.1.2623
OBJECT IDENTIFIER    

asus-wireless 1.3.6.1.4.1.2623.4
OBJECT IDENTIFIER    

rtac68u 1.3.6.1.4.1.2623.4.1
OBJECT IDENTIFIER    

rtac68uConfig 1.3.6.1.4.1.2623.4.1.1
The MIB module of Asus RT-AC68U.
MODULE-IDENTITY    

wireless 1.3.6.1.4.1.2623.4.1.1.1
OBJECT IDENTIFIER    

lan 1.3.6.1.4.1.2623.4.1.1.2
OBJECT IDENTIFIER    

wan 1.3.6.1.4.1.2623.4.1.1.3
OBJECT IDENTIFIER    

ipv6 1.3.6.1.4.1.2623.4.1.1.4
OBJECT IDENTIFIER    

vpn 1.3.6.1.4.1.2623.4.1.1.5
OBJECT IDENTIFIER    

firewall 1.3.6.1.4.1.2623.4.1.1.6
OBJECT IDENTIFIER    

administration 1.3.6.1.4.1.2623.4.1.1.7
OBJECT IDENTIFIER    

systemLog 1.3.6.1.4.1.2623.4.1.1.8
OBJECT IDENTIFIER    

guestNetwork 1.3.6.1.4.1.2623.4.1.1.9
OBJECT IDENTIFIER    

trafficManager 1.3.6.1.4.1.2623.4.1.1.10
OBJECT IDENTIFIER    

parentalControl 1.3.6.1.4.1.2623.4.1.1.11
OBJECT IDENTIFIER    

quickInternetSetup 1.3.6.1.4.1.2623.4.1.1.12
OBJECT IDENTIFIER    

wl2g 1.3.6.1.4.1.2623.4.1.1.1.1
OBJECT IDENTIFIER    

generalWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1
OBJECT IDENTIFIER    

ssidWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.1
The network name or SSID is a unique name that identifies the wireless network. WiFi devices automatically detect all networks within range. Assign an identification string of up to 32 characters for your wireless connection.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hideSSIDWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.2
If [YES] is selected, your SSID does not show in site surveys by wireless mobile clients and they can only connect to your ASUS Wireless Router with your SSID of AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wirelessModeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.3
This item allows you to select any of these options for the Wireless Mode of your 802.11n interface. [Auto]: Allows 802.11n, 802.11g, and 802.11b devices to connect to RT-AC68U. [Legacy]: Allows 802.11b/g/n devices to connect to RT-AC68U, but 802.11n devices only run at a speed of 54Mbps. [n Only]: Maximizes performance, but does not allow 802.11g and 802.11b devices to connect to your device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), dot11N-only(1), legacy(2)  

optimizedforXboxWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

protectionWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.5
Tick b/g Protection to allow b/g devices to connect to RT-AC68U without affecting 11n devices, but this increases the router's workload.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

channelBandwidthWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.6
Selecting a wider channel bandwidth provides you with a higher transmission speed. Uses 40MHz coexistent bandwidth to maximize the wireless throughput. If you experience issues with wireless stability, please choose the default mode (20MHz).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b20-or-40MHz(0), b20MHz(1), b40MHz(2)  

controlChannelWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.7
The radio channel for wireless connection operation. 0: auto
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

extensionChannelWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.8
Select the extension channel used in the 20/40MHz channel bandwidth mode. 802.11n uses the extension channel to get extra speed. For channels 1 to 4, you can only select an upper channel. For channels 5 to 7, you can select a lower or an upper channel as the extension channel. For channels above 7, you can only select a lower channel.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), below(2), above(3)  

authenticationWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.9
This field enables the authentication methods for wireless clients.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER open-system(1), shared-key(2), wpa-personal(3), wpa2-personal(4), wpa-auto-personal(5), wpa-enterprise(6), wpa2-enterprise(7), wpa-auto-enterprise(8), radius-with-8021x(9)  

wepEncryptionWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.10
Enable WEP Encyption to encrypt data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep-64bits(1), wep-128bits(2)  

keyIndexWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.11
Default transmit WEP Key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

wl2gWepKeyTable 1.3.6.1.4.1.2623.4.1.1.1.1.1.12
Wep Key Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wl2gWepKeyEntry

wl2gWepKeyEntry 1.3.6.1.4.1.2623.4.1.1.1.1.1.12.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Wl2gWepKeyEntry  

wepKeyIndexWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.12.1.1
Wep key index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

wepKeyValueWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.12.1.2
WEP key value.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

passphraseWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.13
If you select WEP Encryption, you can key in some words in this field to generate WEP keys automatically.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wpaEncryptionWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.14
Enable WPA Encryption to encrypt data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

wpaPreSharedKeyWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.15
This field requires a password of 8 and 63 characters(letters, numbers or a combination) or 64 hex digits to start the encryption process .
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

keyRotationIntervalWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.1.17
This field specifies the interval (in seconds) after which a WPA group key is changed . Enter [0] (zero) to indicate that a periodic key-change is not required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wpsWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2
OBJECT IDENTIFIER    

enableWPSWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.1
Selecting Yes allows Wi-Fi Protected Setup (WPS) to simplify the process of connecting any device to the wireless network. WPS support the authentication of Open system, WPA-Personal, WPA2-Personal. Not support Shared Key, WPA-Enterprise, WPA2-Enterprise and Radius.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

switchFrequencyTo5g 1.3.6.1.4.1.2623.4.1.1.1.1.2.2
If [YES] is selected, frequency of WPS will be switched to 5G. This value can be set only when WPS is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), nothing(2)  

connectionStatusWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

configuredWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

apPinCodeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.5
Key in the router's PIN code in the client's WPS utility and configure the network name and security settings.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientPinCodeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wpsMethodWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.2.7
Selecting PIN (Personal Information Number) you have to enter a number to establish a wireless connection. Select PBC (Push Button Configuration) you have to push a button to establish a wireless connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pbc(1), clientPinCode(2), nothing(3)  

bridgeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3
OBJECT IDENTIFIER    

wbMacAddrWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.1
MAC address of 2.4GHz.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wbApModeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.2
Select [AP Only] to disable Wireless Bridge function. Select [WDS Only] to disable local wireless station connection. Select [Hybrid] to enable Wireless bridge function and wireless stations will be able to connect to the AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ap-only(1), wds-only(2), hybrid(3)  

wbConnectRemoteBridegeAPWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.3
Select [Yes] to connect RT-AC68U to other APs listed in the Remote AP List.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wbRemoteBridgeScanWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.5
OBJECT IDENTIFIER    

wbBridgeAPScanActWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

wbWl2gBridgeAPScanTable 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WbBridgeAPScanEntryWl2g

wbWl2gBridgeAPScanEntry 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WbBridgeAPScanEntryWl2g  

wbAPResultIndexWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.2.1.1
AP scan result entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

wbAPResultBSSIDWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.2.1.2
BSSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wbAPResultSSIDWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.5.2.1.3
SSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

wbWl2gRemoteAPTable 1.3.6.1.4.1.2623.4.1.1.1.1.3.6
Remote AP list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WBRemoteAPEntryWl2g

wbRemoteAPEntryWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WBRemoteAPEntryWl2g  

wbRemoteAPIndexWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.6.1.1
Remote AP Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

wbRemoteAPMACAddrWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.6.1.2
MAC address of remote bridge APs.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

wbRemoteAPDelEntryWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.3.6.1.3
Delete the AP enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

macFilterWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4
OBJECT IDENTIFIER    

macFilterModeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4.1
In Accept mode, RT-AC68U only accept clients with MAC address in the list. In Reject mode, RT-AC68U will reject clients with MAC address in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), accept(2), reject(3)  

wl2gMacFilterTable 1.3.6.1.4.1.2623.4.1.1.1.1.4.2
Mac filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacFilterEntryWl2g

macFilterEntryWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  MacFilterEntryWl2g  

macFilterIndexWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4.2.1.1
Mac filter list index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

macFilterMACAddrWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4.2.1.2
MAC address of station which device controls its access.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

macFilterDelEntryWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.4.2.1.3
Delete the mac filter entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

radiusSettingWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.5
OBJECT IDENTIFIER    

radiusServerIPAddrWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.5.1
The IP address of the RADIUS server for wireless authentication and dynamic WEP key derivation.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

radiusPortWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.5.2
The UDP port number for connection to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusConnectionSecretWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.5.3
The password to connect to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

professionalWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6
OBJECT IDENTIFIER    

radioWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.1
Select [Yes] to enable radio function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

enableSchedWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.2
Select [Yes] to enable wirelss schedule function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

weekDaysEnableRadioWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.3
This field defines the dates that wireless function is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS monday(0), tuesday(1), wednesday(2), thursday(3), friday(4)  

weekDaysRadioStartTimeHWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.4
Hour of starting time of weekdays to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysRadioStartTimeMWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.5
Minute of starting time of weekdays to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekDaysRadioEndTimeHWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.6
Hour of ending time of weekdays to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysRadioEndTimeMWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.7
Minute of ending time of weekdays to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendEnableRadioWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.8
This field defines the dates that wireless function is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS saturday(0), sunday(1)  

weekendRadioStartTimeHWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.9
Hour of starting time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendRadioStartTimeMWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.10
Minute of starting time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendRadioEndTimeHWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.11
Hour of ending time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendRadioEndTimeMWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.12
Minute of ending time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

apIsolatedWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.13
When this feature is enabled, wireless clients or devices will not be able to communicate with each other. You may want to utilize this feature if you have many guests that frequent your wireless network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

roamingAssistantWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.14
In multiple AP or wireless router-repeater environment, client sometimes cannot automatically connect to the AP with better signal because it still connect to main wireless router. Enabling this feature would force disconnecting the client and main router when the signal strength is under the threshold and client can choose the AP with better signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

disconnectClientRSSIWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.15
Disconnect clients with RSSI lower than the settings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER -90..-70  

igmpSnoopingWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.16
When enabled, IGMP Snooping monitors IGMP communication among devices and optimizes wireless multicast traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

multicastRateWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.17
Select the multicast transmission rate. You are recommended to select Auto to maximize performance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), rOFDM-6(2), rOFDM-9(3), rOFDM-12(4), rOFDM-18(5), rOFDM-24(6), rOFDM-36(7), rOFDM-48(8), rOFDM-54(9), rCCK-1(10), rCCK-2(11), rCCK-5(12), rCCK-11(13)  

preambleTypeWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.18
The Preamble type defines the length of the CRC (Cyclic Redundancy Check) block, which is a technique for detecting data transmission errors among wireless devices. We recommend that you configure all wireless devices to the same preamble type. Use short preamble for wireless devices in high network traffic areas. Use long preamble for older wireless devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(1), short(2), auto(3)  

aMPDURTSWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.19
Select 'Enable' to use RTS for every AMPDU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

rtsThresholdWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.20
Lower the signal RTS (Request To Send) to promote the transmission efficiency in condition of noisy environment or too many clients.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2347  

dtimIntervalWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.21
DTIM (Delivery Traffic Indication Message) is included in Beacon packet.The DTIM Interval (1-255) means the period of time to wake up wireless clients from Sleep Mode. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

beaconIntervalWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.22
Beacon Interval means the period of time between one beacon and the next one. The default value is 100 (the unit is millisecond, or 1/1000 second). Lower the Beacon Interval to improve transmission performance in unstable environment or for roaming clients, but it will be power consuming.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..1000  

txBurstingWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.23
Selecting [Enable] enables TX Bursting to improve the transmission speed (from AP to client) of g devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmmAPSDWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.24
Enable or Disable WMM APSD (Automatic Power Save Delivery).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

optimizeAMPDUAggregWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.25
Optimize max number of mpdus in an AMDPU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

optimizeAckSuppressionWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.26
Optimize max number of ack to suppress in a row.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

txPowerAdjustmentWl2g 1.3.6.1.4.1.2623.4.1.1.1.1.6.27
Increase Tx Power to enhance the transmission quality or decrease Tx Power to reduce power consumption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

wl5g 1.3.6.1.4.1.2623.4.1.1.1.2
OBJECT IDENTIFIER    

generalWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1
OBJECT IDENTIFIER    

ssidWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.1
The network name or SSID is a unique name that identifies the wireless network. WiFi devices automatically detect all networks within range. Assign an identification string of up to 32 characters for your wireless connection.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

hideSSIDWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.2
If [YES] is selected, your SSID does not show in site surveys by wireless mobile clients and they can only connect to your ASUS Wireless Router with your SSID of AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

wirelessModeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.3
This item allows you to select any of these options for the Wireless Mode of your 802.11n interface. [Auto]: Allows 802.11n, 802.11g, and 802.11b devices to connect to RT-AC68U. [Legacy]: Allows 802.11b/g/n devices to connect to RT-AC68U, but 802.11n devices only run at a speed of 54Mbps. [n Only]: Maximizes performance, but does not allow 802.11g and 802.11b devices to connect to your device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), dot11N-only(1), legacy(2), n-ac-mixed(8)  

optimizedforXboxWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

channelBandwidthWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.5
Selecting a wider channel bandwidth provides you with a higher transmission speed. Uses 40MHz coexistent bandwidth to maximize the wireless throughput. If you experience issues with wireless stability, please choose the default mode (20MHz).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER b20-40-80MHz(0), b20MHz(1), b40MHz(2), b80MHz(3)  

controlChannelWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.6
The radio channel for wireless connection operation. 0: auto
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

extensionChannelWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.7
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER auto(1)  

authenticationWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.8
This field enables the authentication methods for wireless clients.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER opensystem(1), sharedkey(2), wpa-personal(3), wpa2-personal(4), wpa-auto-personal(5), wpa-enterprise(6), wpa2-enterprise(7), wpa-auto-enterprise(8), radius-with-8021x(9)  

wepEncryptionWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.9
Enable WEP Encyption to encrypt data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wep-64bits(1), wep-128bits(2)  

keyIndexWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.10
Default transmit WEP Key.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

wl5gWepKeyTable 1.3.6.1.4.1.2623.4.1.1.1.2.1.11
Wep Key Table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WepKeyEntryWl5g

wepKeyEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.11.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WepKeyEntryWl5g  

wepKeyIndexWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.11.1.1
Wep key index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

wepKeyValueWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.11.1.2
WEP key value
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

passphraseWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.12
If you select WEP Encryption, you can key in some words in this field to generate WEP keys automatically.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wpaEncryptionWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.13
Enable WPA Encryption to encrypt data.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

wpaPreSharedKeyWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.14
This field requires a password of 8 and 63 characters(letters, numbers or a combination) or 64 hex digits to start the encryption process .
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

keyRotationIntervalWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.1.16
This field specifies the interval (in seconds) after which a WPA group key is changed . Enter [0] (zero) to indicate that a periodic key-change is not required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wpsWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2
OBJECT IDENTIFIER    

enableWPSWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.1
Selecting Yes allows Wi-Fi Protected Setup (WPS) to simplify the process of connecting any device to the wireless network. WPS support the authentication of Open system, WPA-Personal, WPA2-Personal. Not support Shared Key, WPA-Enterprise, WPA2-Enterprise and Radius.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

switchFrequencyTo2g 1.3.6.1.4.1.2623.4.1.1.1.2.2.2
If [YES] is selected, frequency of WPS will be switched to 2.4G. This value can be set only when WPS is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), nothing(2)  

connectionStatusWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

configuredWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.4
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

apPinCodeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.5
Key in the router's PIN code in the client's WPS utility and configure the network name and security settings.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

clientPinCodeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

wpsMethodWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.2.7
Selecting PIN (Personal Information Number) you have to enter a number to establish a wireless connection. Select PBC (Push Button Configuration) you have to push a button to establish a wireless connection.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pbc(1), clientPinCode(2), nothing(3)  

bridgeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3
OBJECT IDENTIFIER    

wbMacAddrWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.1
MAC address of 5GHz.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

wbApModeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.2
Select [AP Only] to disable Wireless Bridge function. Select [WDS Only] to disable local wireless station connection. Select [Hybrid] to enable Wireless bridge function and wireless stations will be able to connect to the AP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ap-only(1), wds-only(2), hybrid(3)  

wbConnectRemoteBridegeAPWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.3
Select [Yes] to connect RT-AC68U to other APs listed in the Remote AP List.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wbRemoteBridgeScanWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5
OBJECT IDENTIFIER    

wbBridgeAPScanActWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

wbWl5gBridgeAPScanTable 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WbBridgeAPScanEntryWl5g

wbBridgeAPScanEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WbBridgeAPScanEntryWl5g  

wbAPResultIndexWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.2.1.1
AP scan result entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

wbAPResultBSSIDWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.2.1.2
BSSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wbAPResultSSIDWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.5.2.1.3
SSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

wbWl5gRemoteAPTable 1.3.6.1.4.1.2623.4.1.1.1.2.3.6
Remote AP list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WBRemoteAPEntryWl5g

wbRemoteAPEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.6.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WBRemoteAPEntryWl5g  

wbRemoteAPIndexWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.6.1.1
Remote AP Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

wbRemoteAPMACAddrWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.6.1.2
MAC address of remote bridge APs.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

wbRemoteAPDelEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.3.6.1.3
Delete the AP enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

macFilterWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4
OBJECT IDENTIFIER    

macFilterModeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4.1
In Accept mode, RT-AC68U only accept clients with MAC address in the list. In Reject mode, RT-AC68U will reject clients with MAC address in the list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), accept(2), reject(3)  

wl5gMacFilterTable 1.3.6.1.4.1.2623.4.1.1.1.2.4.2
Mac filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MacFilterEntryWl5g

macFilterEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  MacFilterEntryWl5g  

macFilterIndexWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4.2.1.1
Mac filter list index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

macFilterMACAddrWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4.2.1.2
MAC address of station which device controls its access.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

macFilterDelEntryWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.4.2.1.3
Delete the mac filter entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

radiusSettingWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.5
OBJECT IDENTIFIER    

radiusServerIPAddrWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.5.1
The IP address of the RADIUS server for wireless authentication and dynamic WEP key derivation.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

radiusPortWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.5.2
The UDP port number for connection to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

radiusConnectionSecretWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.5.3
The password to connect to the RADIUS server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

professionalWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6
OBJECT IDENTIFIER    

radioWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.1
Select [Yes] to enable radio function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

enableSchedWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.2
Select [Yes] to enable wirelss schedule function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

weekDaysEnableRadioWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.3
This field defines the dates that wireless function is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS monday(0), tuesday(1), wednesday(2), thursday(3), friday(4)  

weekDaysRadioStartTimeHWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.4
Hour of starting time of weekdays to enable 5G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysRadioStartTimeMWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.5
Minute of starting time of weekdays to enable 5G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekDaysRadioEndTimeHWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.6
Hour of ending time of weekdays to enable 5G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysRadioEndTimeMWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.7
Minute of ending time of weekdays to enable 5G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendEnableRadioWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.8
This field defines the dates that wireless function is enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS saturday(0), sunday(1)  

weekendRadioStartTimeHWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.9
Hour of starting time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendRadioStartTimeMWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.10
Minute of starting time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendRadioEndTimeHWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.11
Hour of ending time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendRadioEndTimeMWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.12
Minute of ending time of weekend to enable 2.4G radio.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

apIsolatedWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.13
When this feature is enabled, wireless clients or devices will not be able to communicate with each other. You may want to utilize this feature if you have many guests that frequent your wireless network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

roamingAssistantWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.14
In multiple AP or wireless router-repeater environment, client sometimes cannot automatically connect to the AP with better signal because it still connect to main wireless router. Enabling this feature would force disconnecting the client and main router when the signal strength is under the threshold and client can choose the AP with better signal.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

disconnectClientRSSIWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.15
Disconnect clients with RSSI lower than the settings.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

igmpSnoopingWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.16
When enabled, IGMP Snooping monitors IGMP communication among devices and optimizes wireless multicast traffic.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

multicastRateWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.17
Select the multicast transmission rate. You are recommended to select Auto to maximize performance.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), rOFDM-6(2), rOFDM-9(3), rOFDM-12(4), rOFDM-18(5), rOFDM-24(6), rOFDM-36(7), rOFDM-48(8), rOFDM-54(9)  

preambleTypeWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.18
The Preamble type defines the length of the CRC (Cyclic Redundancy Check) block, which is a technique for detecting data transmission errors among wireless devices. We recommend that you configure all wireless devices to the same preamble type. Use short preamble for wireless devices in high network traffic areas. Use long preamble for older wireless devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER long(1), short(2), auto(3)  

fragThresholdWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.19
Fragmentation Threshold sets the frame size of incoming messages (ranging from 256 to 2346 bytes) used as fragmentation boundary. If the frame size is too big, the heavy interference affects transmission reliability. If the frame size is too small, it decreases transmission efficiency.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 256..2346  

rtsThresholdWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.20
Lower the signal RTS (Request To Send) to promote the transmission efficiency in condition of noisy environment or too many clients.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..2347  

dtimIntervalWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.21
DTIM (Delivery Traffic Indication Message) is included in Beacon packet.The DTIM Interval (1-255) means the period of time to wake up wireless clients from Sleep Mode. The default value is 3.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

beaconIntervalWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.22
Beacon Interval means the period of time between one beacon and the next one. The default value is 100 (the unit is millisecond, or 1/1000 second). Lower the Beacon Interval to improve transmission performance in unstable environment or for roaming clients, but it will be power consuming.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 20..1000  

txBurstingWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.23
Selecting [Enable] enables TX Bursting to improve the transmission speed (from AP to client) of g devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmmWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.24
Enable WMM (Wi-Fi Multimedia) to improve user experience of multimedia applications on your wireless network.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), enable(2), disable(3)  

wmmNoAcknowledgementWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.25
[No-Acknowledgement] is the acknowledge policy at MAC level. When enabled, it results in more efficient throughput but higher error rates in a noisy Radio Frequency (RF) environment.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

wmmAPSDWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.26
Enable or Disable WMM APSD (Automatic Power Save Delivery).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

optimizeAMPDUAggregWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.27
Optimize max number of mpdus in an AMDPU.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

optimizeAckSuppressionWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.28
Optimize max number of ack to suppress in a row.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

explicitBeamformingWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.29
The client's WLAN adapter and router both support beamforming technology. This technology allows these devices to communicate the channel estimation and steering direction to each other to improve download and uplink speed.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

txPowerAdjustmentWl5g 1.3.6.1.4.1.2623.4.1.1.1.2.6.30
Increase Tx Power to enhance the transmission quality or decrease Tx Power to reduce power consumption.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..200  

lan-ip 1.3.6.1.4.1.2623.4.1.1.2.1
OBJECT IDENTIFIER    

lGetIpAutomatically 1.3.6.1.4.1.2623.4.1.1.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lIPAddress 1.3.6.1.4.1.2623.4.1.1.2.1.2
The value of this object is IP Address of the device as seen in your local network. The default value is 192.168.1.1.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lSubnetMask 1.3.6.1.4.1.2623.4.1.1.2.1.3
The value this object is Subnet Mask of the device as seen in your local network. The default value is 255.255.255.0.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lDefaultGateway 1.3.6.1.4.1.2623.4.1.1.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lConnectToDnsServerAutomatically 1.3.6.1.4.1.2623.4.1.1.2.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lDnsServer1 1.3.6.1.4.1.2623.4.1.1.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

lDnsServer2 1.3.6.1.4.1.2623.4.1.1.2.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

dhcp-server 1.3.6.1.4.1.2623.4.1.1.2.2
OBJECT IDENTIFIER    

basic-config-ds 1.3.6.1.4.1.2623.4.1.1.2.2.1
OBJECT IDENTIFIER    

enableDHCPServer 1.3.6.1.4.1.2623.4.1.1.2.2.1.1
Enable the DHCP server function to allow the router's DHCP server to automatically assign IP addresses to network clients. If this function is disabled, you need to manually assign the IP address settings on your LAN devices.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

domainName 1.3.6.1.4.1.2623.4.1.1.2.2.1.2
The Domain Name for clients who request IP Address from the DHCP Server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..253)  

ipPoolStartingAddress 1.3.6.1.4.1.2623.4.1.1.2.2.1.3
The first address in the pool to be assigned by the DHCP server in LAN.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipPoolEndingAddress 1.3.6.1.4.1.2623.4.1.1.2.2.1.4
This field indicates the last address in the pool to be assigned by the DHCP server in LAN.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

leaseTime 1.3.6.1.4.1.2623.4.1.1.2.2.1.5
Set the lease time that the network client is allowed to use its current IP address to connect to the wireless router. When the lease time expires, the network client should either renew or get a new IP address from the wireless router's DHCP server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

defaultGateway 1.3.6.1.4.1.2623.4.1.1.2.2.1.6
This field indicates the IP address of gateway in your LAN. If you leave it blank, the IP address of RT-AC68U will be assigned.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

dns-wins-server 1.3.6.1.4.1.2623.4.1.1.2.2.2
OBJECT IDENTIFIER    

dnsServer 1.3.6.1.4.1.2623.4.1.1.2.2.2.1
This field indicates the IP address of DNS to provide to clients that request IP Address from DHCP Server. You can leave it blank, then the DNS request will be processed by RT-AC68U.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

winsServer 1.3.6.1.4.1.2623.4.1.1.2.2.2.2
The Windows Internet Naming Service manages interaction of each PC with the Internet. If you use a WINS server, enter IP Address of server here.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

manual-assignment 1.3.6.1.4.1.2623.4.1.1.2.2.3
OBJECT IDENTIFIER    

enableManualAssignment 1.3.6.1.4.1.2623.4.1.1.2.2.3.1
Assign a fixed IP address for a specific client. The client's MAC address is required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dsClientListAct 1.3.6.1.4.1.2623.4.1.1.2.2.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

dsClientTable 1.3.6.1.4.1.2623.4.1.1.2.2.3.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DsClientEntry

dsClientEntry 1.3.6.1.4.1.2623.4.1.1.2.2.3.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DsClientEntry  

dsClientIndex 1.3.6.1.4.1.2623.4.1.1.2.2.3.3.1.1
Client entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

dsClientMACAddr 1.3.6.1.4.1.2623.4.1.1.2.2.3.3.1.2
MAC address of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

dsClientIPAddr 1.3.6.1.4.1.2623.4.1.1.2.2.3.3.1.3
IP address of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

dsClientName 1.3.6.1.4.1.2623.4.1.1.2.2.3.3.1.4
Name of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

assignedIPTable 1.3.6.1.4.1.2623.4.1.1.2.2.3.4
Assigned IP around the DHCP list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AssignedIPEntry

assignedIPEntry 1.3.6.1.4.1.2623.4.1.1.2.2.3.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AssignedIPEntry  

assignedIPIndex 1.3.6.1.4.1.2623.4.1.1.2.2.3.4.1.1
Remote AP Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

assignedIPMACAddr 1.3.6.1.4.1.2623.4.1.1.2.2.3.4.1.2
MAC address of assigned IP around the DHCP list.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

assignedIPIPAddr 1.3.6.1.4.1.2623.4.1.1.2.2.3.4.1.3
IP address of assigned IP around the DHCP list.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

assignedIPDelEntry 1.3.6.1.4.1.2623.4.1.1.2.2.3.4.1.4
Delete the assigned IP enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

route 1.3.6.1.4.1.2623.4.1.1.2.3
OBJECT IDENTIFIER    

enableStaticRoutes 1.3.6.1.4.1.2623.4.1.1.2.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

rClientListAct 1.3.6.1.4.1.2623.4.1.1.2.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

rClientTable 1.3.6.1.4.1.2623.4.1.1.2.3.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RClientEntry

rClientEntry 1.3.6.1.4.1.2623.4.1.1.2.3.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RClientEntry  

rClientIndex 1.3.6.1.4.1.2623.4.1.1.2.3.3.1.1
Client entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

rClientIPAddr 1.3.6.1.4.1.2623.4.1.1.2.3.3.1.2
IP address of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

rClientName 1.3.6.1.4.1.2623.4.1.1.2.3.3.1.3
Name of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

staticRouteTable 1.3.6.1.4.1.2623.4.1.1.2.3.4
Static route list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    StaticRouteEntry

staticRouteEntry 1.3.6.1.4.1.2623.4.1.1.2.3.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  StaticRouteEntry  

staticRouteIndex 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.1
Static Route Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

staticRouteIPAddr 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.2
IP address of static route list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

staticRouteNetmask 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.3
Netmask of static route list.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

staticRouteGateway 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.4
Netmask of static route list.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

staticRouteMetric 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.5
Metric of static route list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

staticRouteInterface 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.6
Interface of static route list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lan(1), man(2), wan(3)  

staticRouteDelEntry 1.3.6.1.4.1.2623.4.1.1.2.3.4.1.7
Delete the static route enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

iptv 1.3.6.1.4.1.2623.4.1.1.2.4
OBJECT IDENTIFIER    

port 1.3.6.1.4.1.2623.4.1.1.2.4.1
OBJECT IDENTIFIER    

selectISPProfile 1.3.6.1.4.1.2623.4.1.1.2.4.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), unifi-home(2), unifi-business(3), singtel-mio(4), singtel-others(5), m1-fiber(6), maxis-fiber(7), maxis-fiber-special(8), manual(9)  

iptvSTBPort 1.3.6.1.4.1.2623.4.1.1.2.4.1.2
This variable can be set only when the value of 'selectISPProfile' is 'none'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), lan1(2), lan2(3), lan3(4), lan4(5), lan1-and-lan2(6), lan3-and-lan4(7)  

voipPort 1.3.6.1.4.1.2623.4.1.1.2.4.1.3
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

internetVID 1.3.6.1.4.1.2623.4.1.1.2.4.1.4
User can set this variable only when 'selectISPProfile' is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

internetPRIO 1.3.6.1.4.1.2623.4.1.1.2.4.1.5
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

lan4PortVID 1.3.6.1.4.1.2623.4.1.1.2.4.1.6
User can set this variable only when 'selectISPProfil'e is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lan4PortPRIO 1.3.6.1.4.1.2623.4.1.1.2.4.1.7
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

lan3PortVID 1.3.6.1.4.1.2623.4.1.1.2.4.1.8
User can set this variable only when 'selectISPProfile' is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

lan3PortPRIO 1.3.6.1.4.1.2623.4.1.1.2.4.1.9
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

special-applications 1.3.6.1.4.1.2623.4.1.1.2.4.2
OBJECT IDENTIFIER    

useDHCPRoutes 1.3.6.1.4.1.2623.4.1.1.2.4.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), microsoft(2), rfc3442(3), rfc3442-and-microsoft(4)  

enableMulticastRouting 1.3.6.1.4.1.2623.4.1.1.2.4.2.2
Allows the wireless router to handle the multicast packets. Enabling multicast router also enables the RTP and RTSP functions.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

enableEfficientMulticastForwarding 1.3.6.1.4.1.2623.4.1.1.2.4.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

udpProxy 1.3.6.1.4.1.2623.4.1.1.2.4.2.4
Use this function to run the IPTV application (such as VLC) on several computers at the same time. This function can convert multicast UDP streams to unicast HTTP streams. Enter the port (such as 4000) that you want to assign for the IPTV application, then use this format to enter the address in the play list to watch IPTV streams: http://[Router IP]: [Udpxy port]/[protocol]/[channel IP address]:[channel port] (such as http://192.168.1.1: 4000/udp/239.255.1.1:5000 or http://192.168.1.1:4000/rtp/239.255.1.2:5000). Enter 0 (zero) to disable this function.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

switch-control 1.3.6.1.4.1.2623.4.1.1.2.5
OBJECT IDENTIFIER    

enableJumboFrame 1.3.6.1.4.1.2623.4.1.1.2.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

enableNATAccelerator 1.3.6.1.4.1.2623.4.1.1.2.5.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), ctf-level1(2), ctf-level2(3)  

internet-connection 1.3.6.1.4.1.2623.4.1.1.3.1
OBJECT IDENTIFIER    

wantype-wan 1.3.6.1.4.1.2623.4.1.1.3.1.1
OBJECT IDENTIFIER    

wbasic-config-ic 1.3.6.1.4.1.2623.4.1.1.3.1.1.1
OBJECT IDENTIFIER    

wwanConnectionType 1.3.6.1.4.1.2623.4.1.1.3.1.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER automatic-ip(1), pppoe(2), static-ip(3), pptp(4), l2tp(5)  

wenableWAN 1.3.6.1.4.1.2623.4.1.1.3.1.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wenableNAT 1.3.6.1.4.1.2623.4.1.1.3.1.1.1.3
NAT (Network Address Translation) is a process used in routers to replace the address information of network packet with new address information. Typical applications for NAT is router which connect to LAN with the WAN. In LAN every network devices had a private IP(LAN IP) but there is only one public IP(WAN IP). To grant the network devices access to the Internet, the router replaces the private IP address of the sender with its own public IP address in all outgoing data packets. The router saves all necessary information in a table(NAT table) so that incoming data packets can then be assigned on the correct network device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wenableUPnP 1.3.6.1.4.1.2623.4.1.1.3.1.1.1.4
UPnP (Universal Plug and Play) allows several devices (routers, televisions, stereo systems, game consoles, cellular phone) to be controlled via an IP-based network with or without a central control through a gateway.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wwan-ip-setting 1.3.6.1.4.1.2623.4.1.1.3.1.1.2
OBJECT IDENTIFIER    

wgetWanIPAuto 1.3.6.1.4.1.2623.4.1.1.3.1.1.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wwIPAddress 1.3.6.1.4.1.2623.4.1.1.3.1.1.2.2
If your WAN connection requires a static IP address, key in the IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwSubnetMask 1.3.6.1.4.1.2623.4.1.1.3.1.1.2.3
If your WAN connection requires a static IP address, key in the subnet mask in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwDefaultGateway 1.3.6.1.4.1.2623.4.1.1.3.1.1.2.4
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

wwan-dns-setting 1.3.6.1.4.1.2623.4.1.1.3.1.1.3
OBJECT IDENTIFIER    

wconnectDNSServerAuto 1.3.6.1.4.1.2623.4.1.1.3.1.1.3.1
Allows this router to get the DNS IP address from the ISP automatically.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wdnsServer1 1.3.6.1.4.1.2623.4.1.1.3.1.1.3.2
This field indicates the IP address of DNS that RT-AC68U contact to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

wdnsServer2 1.3.6.1.4.1.2623.4.1.1.3.1.1.3.3
This field indicates the IP address of DNS that RT-AC68U contact to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

waccount-setting 1.3.6.1.4.1.2623.4.1.1.3.1.1.4
OBJECT IDENTIFIER    

wAuthentication 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dot1x-md5(2)  

wUserName 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.2
This field is only available when you set the WAN Connection Type as USB Modem, PPPoE, PPTP or L2TP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

wPassword 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.3
This field is only available when you set WAN Connection Type as PPPoE.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

widleDisconnectTime 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.4
This field is optional and allows you to configure to terminate your ISP connection after a specified period of time. A value of zero allows infinite idle time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wmtu 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.5
The Maximum Transmission Unit (MTU) of PPPoE packet. The default value is 1492. Change this value only if your ISP requires it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wmru 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.6
The Maximum Receive Unit (MRU) of PPPoE packet. The default value is 1492. Change this value only if your ISP requires it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

wserviceName 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.7
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

waccessConcentratorName 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.8
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

wpptpOptions 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.9
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), no-encryption(2), mppe-40(3), mppe-128(4)  

wadditionalPppdOptions 1.3.6.1.4.1.2623.4.1.1.3.1.1.4.10
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

wspecial-requirement-from-ISP 1.3.6.1.4.1.2623.4.1.1.3.1.1.5
OBJECT IDENTIFIER    

wvpnServer 1.3.6.1.4.1.2623.4.1.1.3.1.1.5.1
If your WAN connection type is PPTP or L2TP, Please enter the server name or server ip of the VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

wenableVPNandDHCPConnection 1.3.6.1.4.1.2623.4.1.1.3.1.1.5.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

wHostName 1.3.6.1.4.1.2623.4.1.1.3.1.1.5.3
This field allows you to provide a host name for RT-AC68U. It is usually requested by your ISP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

wMacAddress 1.3.6.1.4.1.2623.4.1.1.3.1.1.5.4
MAC (Media Access Control) address is a unique identifier that identifies your computer or device in the network. ISPs monitor the MAC addresses of devices that connect to their services, and would disallow Internet connection for new MAC addresses. To fix this issue, you can do either of the following: *Contact your ISP and request to update the MAC address associated with your ISP subscription. *Clone or change the MAC address of the new device to match the MAC address of the original device.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

wdhcpQueryFrequency 1.3.6.1.4.1.2623.4.1.1.3.1.1.5.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal-mode(1), aggressive-mode(2)  

wantype-lan 1.3.6.1.4.1.2623.4.1.1.3.1.2
OBJECT IDENTIFIER    

lbasic-config-ic 1.3.6.1.4.1.2623.4.1.1.3.1.2.1
OBJECT IDENTIFIER    

lwanConnectionType 1.3.6.1.4.1.2623.4.1.1.3.1.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER automatic-ip(1), pppoe(2), static-ip(3), pptp(4), l2tp(5)  

lenableWAN 1.3.6.1.4.1.2623.4.1.1.3.1.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lenableNAT 1.3.6.1.4.1.2623.4.1.1.3.1.2.1.3
NAT (Network Address Translation) is a process used in routers to replace the address information of network packet with new address information. Typical applications for NAT is router which connect to LAN with the WAN. In LAN every network devices had a private IP(LAN IP) but there is only one public IP(WAN IP). To grant the network devices access to the Internet, the router replaces the private IP address of the sender with its own public IP address in all outgoing data packets. The router saves all necessary information in a table(NAT table) so that incoming data packets can then be assigned on the correct network device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lenableUPnP 1.3.6.1.4.1.2623.4.1.1.3.1.2.1.4
UPnP (Universal Plug and Play) allows several devices (routers, televisions, stereo systems, game consoles, cellular phone) to be controlled via an IP-based network with or without a central control through a gateway.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lwan-ip-setting 1.3.6.1.4.1.2623.4.1.1.3.1.2.2
OBJECT IDENTIFIER    

lgetWanIPAuto 1.3.6.1.4.1.2623.4.1.1.3.1.2.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lwIPAddress 1.3.6.1.4.1.2623.4.1.1.3.1.2.2.2
If your WAN connection requires a static IP address, key in the IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lwSubnetMask 1.3.6.1.4.1.2623.4.1.1.3.1.2.2.3
If your WAN connection requires a static IP address, key in the subnet mask in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lwDefaultGateway 1.3.6.1.4.1.2623.4.1.1.3.1.2.2.4
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

lwan-dns-setting 1.3.6.1.4.1.2623.4.1.1.3.1.2.3
OBJECT IDENTIFIER    

lwconnectDNSServerAuto 1.3.6.1.4.1.2623.4.1.1.3.1.2.3.1
Allows this router to get the DNS IP address from the ISP automatically.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lwdnsServer1 1.3.6.1.4.1.2623.4.1.1.3.1.2.3.2
This field indicates the IP address of DNS that RT-AC68U contact to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

lwdnsServer2 1.3.6.1.4.1.2623.4.1.1.3.1.2.3.3
This field indicates the IP address of DNS that RT-AC68U contact to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

laccount-setting 1.3.6.1.4.1.2623.4.1.1.3.1.2.4
OBJECT IDENTIFIER    

lAuthentication 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dot1x-md5(2)  

lUserName 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.2
This field is only available when you set the WAN Connection Type as USB Modem, PPPoE, PPTP or L2TP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

lPassword 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.3
This field is only available when you set WAN Connection Type as PPPoE.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

lidleDisconnectTime 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.4
This field is optional and allows you to configure to terminate your ISP connection after a specified period of time. A value of zero allows infinite idle time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

lmtu 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.5
The Maximum Transmission Unit (MTU) of PPPoE packet. The default value is 1492. Change this value only if your ISP requires it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

lmru 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.6
The Maximum Receive Unit (MRU) of PPPoE packet. The default value is 1492. Change this value only if your ISP requires it.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

lserviceName 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.7
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

laccessConcentratorName 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.8
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

lpptpOptions 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.9
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), no-encryption(2), mppe-40(3), mppe-128(4)  

ladditionalPppdOptions 1.3.6.1.4.1.2623.4.1.1.3.1.2.4.10
This field is optional and may be specified by some ISPs. Check with your ISP and fill them in if required.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

lspecial-requirement-from-ISP 1.3.6.1.4.1.2623.4.1.1.3.1.2.5
OBJECT IDENTIFIER    

lvpnServer 1.3.6.1.4.1.2623.4.1.1.3.1.2.5.1
If your WAN connection type is PPTP or L2TP, Please enter the server name or server ip of the VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

lenableVPNandDHCPConnection 1.3.6.1.4.1.2623.4.1.1.3.1.2.5.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

lHostName 1.3.6.1.4.1.2623.4.1.1.3.1.2.5.3
This field allows you to provide a host name for RT-AC68U. It is usually requested by your ISP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

lMacAddress 1.3.6.1.4.1.2623.4.1.1.3.1.2.5.4
MAC (Media Access Control) address is a unique identifier that identifies your computer or device in the network. ISPs monitor the MAC addresses of devices that connect to their services, and would disallow Internet connection for new MAC addresses. To fix this issue, you can do either of the following: *Contact your ISP and request to update the MAC address associated with your ISP subscription. *Clone or change the MAC address of the new device to match the MAC address of the original device.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

ldhcpQueryFrequency 1.3.6.1.4.1.2623.4.1.1.3.1.2.5.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER normal-mode(1), aggressive-mode(2)  

wantype-usb 1.3.6.1.4.1.2623.4.1.1.3.1.3
OBJECT IDENTIFIER    

uEnableUSBModem 1.3.6.1.4.1.2623.4.1.1.3.1.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(0)  

uUsbModem 1.3.6.1.4.1.2623.4.1.1.3.1.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wcdma(1), cdma2000(2), td-scdma(3), wimax(4)  

uNetworkType 1.3.6.1.4.1.2623.4.1.1.3.1.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), both4g-3g(2), only4g(3), only3g(4), only2g(5)  

uAPNService 1.3.6.1.4.1.2623.4.1.1.3.1.3.4
This is optional. If you do not know the APN service name, please contact your ISP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uDialNumber 1.3.6.1.4.1.2623.4.1.1.3.1.3.5
Please enter your dial number.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uPinCode 1.3.6.1.4.1.2623.4.1.1.3.1.3.6
Please input the Personal Identification Number(PIN) code of your SIM card. It must be the number which length is greater than 4 and smaller than 8. If you do not know the PIN code, please contact your ISP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uUsername 1.3.6.1.4.1.2623.4.1.1.3.1.3.7
Please enter your username.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uPassword 1.3.6.1.4.1.2623.4.1.1.3.1.3.8
Please enter your password.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uEmail 1.3.6.1.4.1.2623.4.1.1.3.1.3.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

uUSBAdapter 1.3.6.1.4.1.2623.4.1.1.3.1.3.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(0), samsung-u200(1), asus-t500(2), bandluxe-c120(3), bandluxe-c170(4), bandluxe-c339(5), huawei-e1550(6), huawei-e160g(7), huawei-e161(8), huawei-e169(9), huawei-e176(10), huawei-e220(11), huawei-k3520(12), huawei-et128(13), huawei-e1800(14), huawei-k4505(15), huawei-e172(16), huawei-e372(17), huawei-e122(18), huawei-e160e(19), huawei-e1552(20), huawei-e173(21), huawei-e1823(22), huawei-e1762(23), huawei-e1750c(24), huawei-e1752cu(25), alcatel-x200(26), alcatel-oune-touch-x220s(27), anydata-adu-510a(28), anydata-adu-500a(29), onda-mt833up(30), onda-mw833up(31), mts-ac2746(32), zte-ac5710(33), zte-mu351(34), zte-mf100(35), zte-mf636(36), zte-mf622(37), zte-mf626(38), zte-mf632(39), zte-mf112(40), zte-mfk3570-z(41), cs15(42), cs17(43), icon401(44)  

dual-wan 1.3.6.1.4.1.2623.4.1.1.3.2
OBJECT IDENTIFIER    

dwbasic-config 1.3.6.1.4.1.2623.4.1.1.3.2.1
OBJECT IDENTIFIER    

dwPrimaryWAN 1.3.6.1.4.1.2623.4.1.1.3.2.1.1
Primary WAN and secondary wan must be different.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wan(1), usb(2), lan(3)  

dwPWLanPort 1.3.6.1.4.1.2623.4.1.1.3.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lan1(1), lan2(2), lan3(3), lan4(4)  

dwSecondaryWAN 1.3.6.1.4.1.2623.4.1.1.3.2.1.3
Value 'none' means there is no secondary WAN. And primary WAN and secondary wan must be different.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), wan(1), usb(2), lan(3)  

dwSWLanPort 1.3.6.1.4.1.2623.4.1.1.3.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER lan1(1), lan2(2), lan3(3), lan4(4)  

dwDualWANMode 1.3.6.1.4.1.2623.4.1.1.3.2.1.5
Load Balance optimizes resource use and maximizes throughput. Use Failover mode for better performance if the difference of bandwidth between the Primary and Secondary WAN is more than 10Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fail-over(1), load-balance(2)  

dwLoadBalanceCfgPri 1.3.6.1.4.1.2623.4.1.1.3.2.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

dwLoadBalanceCfgSec 1.3.6.1.4.1.2623.4.1.1.3.2.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

dwAllowFailBack 1.3.6.1.4.1.2623.4.1.1.3.2.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dwPingTimeWatchdog 1.3.6.1.4.1.2623.4.1.1.3.2.2
OBJECT IDENTIFIER    

dwPingInterval 1.3.6.1.4.1.2623.4.1.1.3.2.2.1
Time interval between two ping packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..9  

dwPingDelay 1.3.6.1.4.1.2623.4.1.1.3.2.2.2
Time delay before the first ping packet is sent out when the router is restarted.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

dwPingFailCount 1.3.6.1.4.1.2623.4.1.1.3.2.2.3
Maximum number of pings the router sends continuously. If this value is reached, the primary WAN connection will be switched to the secondary WAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

dwPingFbCount 1.3.6.1.4.1.2623.4.1.1.3.2.2.4
Once switched to secondary wan, firmware can still detect the primary wan. When primary wan keep IP over the set value (Interval+delay)*failback count, the connection switched back to primary wan.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..99  

dwPingEnableWatchdog 1.3.6.1.4.1.2623.4.1.1.3.2.2.5
You can enable Ping Time Watchdog to continuously monitor the primary WAN connection between ZVMODELVZ and the remote host. The router will continuously ping a user defined target in this setting. If the router fails to ping the target IP address, the rouer will automatically do a failover.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dwPingTarget 1.3.6.1.4.1.2623.4.1.1.3.2.2.6
The IP address of the target host where the router is sending ping packets continuously.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

dwRoutingRules 1.3.6.1.4.1.2623.4.1.1.3.2.3
OBJECT IDENTIFIER    

dwEnableRoutingRules 1.3.6.1.4.1.2623.4.1.1.3.2.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dwRoutingRulesTable 1.3.6.1.4.1.2623.4.1.1.3.2.3.2
Routing Rules.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DwRoutingRuleEntry

dwRoutingRule 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DwRoutingRuleEntry  

dwRoutingRuleIndex 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1.1
Routing Rule index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

dwSourceIP 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1.2
Source IP address of the routing rule.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dwDestinationIP 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1.3
Destination IP address of the routing rule.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dwWANUnit 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER primary-wan(1), secondary-wan(2)  

dwRoutingRuleDelEntry 1.3.6.1.4.1.2623.4.1.1.3.2.3.2.1.5
Delete the routing rule enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

port-trigger 1.3.6.1.4.1.2623.4.1.1.3.3
OBJECT IDENTIFIER    

enablePortTrigger 1.3.6.1.4.1.2623.4.1.1.3.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

portTriggerTable 1.3.6.1.4.1.2623.4.1.1.3.3.2
Prt tirgger list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortTriggerEntry

portTriggerEntry 1.3.6.1.4.1.2623.4.1.1.3.3.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PortTriggerEntry  

portTriggerIndex 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.1
Port trigger index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

portTriggerDescription 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.2
Description of port trigger list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..18)  

portTriggerPort 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.3
Port of port trigger list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

portTriggerProtocol 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.4
Protocol of port trigger list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

portTriggerIncomingPort 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.5
Incoming port of port trigger list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

portTriggerIncomingProtocol 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.6
Incoming protocol of port trigger list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2)  

portTriggerDelEntry 1.3.6.1.4.1.2623.4.1.1.3.3.2.1.7
Delete the port trigger enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

port-forwarding 1.3.6.1.4.1.2623.4.1.1.3.4
OBJECT IDENTIFIER    

enablePortForwarding 1.3.6.1.4.1.2623.4.1.1.3.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ftpServerPort 1.3.6.1.4.1.2623.4.1.1.3.4.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

wClientListAct 1.3.6.1.4.1.2623.4.1.1.3.4.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

wClientTable 1.3.6.1.4.1.2623.4.1.1.3.4.4
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    WClientEntry

wClientEntry 1.3.6.1.4.1.2623.4.1.1.3.4.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  WClientEntry  

wClientIndex 1.3.6.1.4.1.2623.4.1.1.3.4.4.1.1
Client entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

wClientIPAddr 1.3.6.1.4.1.2623.4.1.1.3.4.4.1.2
MAC address of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

wClientName 1.3.6.1.4.1.2623.4.1.1.3.4.4.1.3
Name of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portForwardingTable 1.3.6.1.4.1.2623.4.1.1.3.4.5
Port forwarding list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortForwardingEntry

portForwardingEntry 1.3.6.1.4.1.2623.4.1.1.3.4.5.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PortForwardingEntry  

portForwardingIndex 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.1
Port Forwarding Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

portForwardingServiceName 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.2
Service name of port forwarding list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..30)  

portForwardingPortRange 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.3
Port range of port forwarding list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

portForwardingLocalIP 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.4
Local IP of port forwarding list.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

portForwardingLocalPort 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.5
Local port of port forwarding list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..65535  

portForwardingProtocol 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.6
Protocol of port forwarding list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), both(3), other(4)  

portForwardingDelEntry 1.3.6.1.4.1.2623.4.1.1.3.4.5.1.7
Delete the port forwarding entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dmz 1.3.6.1.4.1.2623.4.1.1.3.5
OBJECT IDENTIFIER    

enableDMZ 1.3.6.1.4.1.2623.4.1.1.3.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

exposedStationIPAddr 1.3.6.1.4.1.2623.4.1.1.3.5.2
If IP Address of Exposed Station is not set(blank), DMZ is disabled.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

ddns 1.3.6.1.4.1.2623.4.1.1.3.6
OBJECT IDENTIFIER    

enableDDNSClient 1.3.6.1.4.1.2623.4.1.1.3.6.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ddnsServer 1.3.6.1.4.1.2623.4.1.1.3.6.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER asus(1), dyndns(2), dyndns-custom(3), dyndns-static(4), tzo(5), zoneedit(6), dnsomatic(7), tunnelbroker(8), no-ip(9)  

ddnsHostName 1.3.6.1.4.1.2623.4.1.1.3.6.3
The host name cannot accept number prefix and '.' (such as '123abc' or 'aaa.bbb').
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..63)  

ddnsUserNameOrMail 1.3.6.1.4.1.2623.4.1.1.3.6.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

ddnsPasswordOrKey 1.3.6.1.4.1.2623.4.1.1.3.6.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

enableWildcard 1.3.6.1.4.1.2623.4.1.1.3.6.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

nat-passthrough 1.3.6.1.4.1.2623.4.1.1.3.7
OBJECT IDENTIFIER    

pptpPassthrough 1.3.6.1.4.1.2623.4.1.1.3.7.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

l2tpPassthrough 1.3.6.1.4.1.2623.4.1.1.3.7.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipsecPassthrough 1.3.6.1.4.1.2623.4.1.1.3.7.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rtspPassthrough 1.3.6.1.4.1.2623.4.1.1.3.7.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

h323Passthrough 1.3.6.1.4.1.2623.4.1.1.3.7.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

sipPassthrough 1.3.6.1.4.1.2623.4.1.1.3.7.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

pppoeRelay 1.3.6.1.4.1.2623.4.1.1.3.7.7
Enable PPPoE relay allows devices in LAN to establish a individual PPPoE connections that passes through NAT.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

basic-config-ipv6 1.3.6.1.4.1.2623.4.1.1.4.1
OBJECT IDENTIFIER    

connectionType 1.3.6.1.4.1.2623.4.1.1.4.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), native(2), tunnel-6to4(3), tunnel-6in4(4), tunnel-6rd(5), static-ipv6(6)  

nativeDhcpPd 1.3.6.1.4.1.2623.4.1.1.4.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

serverIPv4Address 1.3.6.1.4.1.2623.4.1.1.4.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipv4AnycastRelay 1.3.6.1.4.1.2623.4.1.1.4.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

dhcpOption 1.3.6.1.4.1.2623.4.1.1.4.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipv6Prefix 1.3.6.1.4.1.2623.4.1.1.4.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

ipv6PrefixLength6rd 1.3.6.1.4.1.2623.4.1.1.4.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..64  

ipv4BorderRouter 1.3.6.1.4.1.2623.4.1.1.4.1.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

ipv4RouterMaskLength 1.3.6.1.4.1.2623.4.1.1.4.1.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..32  

clientIPv6Address 1.3.6.1.4.1.2623.4.1.1.4.1.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

ipv6PrefixLength6in4 1.3.6.1.4.1.2623.4.1.1.4.1.11
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..64  

tunnelMTU 1.3.6.1.4.1.2623.4.1.1.4.1.12
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1280..1480  

tunnelTTL 1.3.6.1.4.1.2623.4.1.1.4.1.13
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..255  

wan-setting-ipv6 1.3.6.1.4.1.2623.4.1.1.4.2
OBJECT IDENTIFIER    

wanIPv6Address 1.3.6.1.4.1.2623.4.1.1.4.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

wanPrefixLength 1.3.6.1.4.1.2623.4.1.1.4.2.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..64  

wanIPv6Gateway 1.3.6.1.4.1.2623.4.1.1.4.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

lan-setting-ipv6 1.3.6.1.4.1.2623.4.1.1.4.3
OBJECT IDENTIFIER    

lanIpv6Address 1.3.6.1.4.1.2623.4.1.1.4.3.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

lanIpv6PrefixLength 1.3.6.1.4.1.2623.4.1.1.4.3.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 3..64  

lanIpv6Prefix 1.3.6.1.4.1.2623.4.1.1.4.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..39)  

lanIpv6AutoConfiguration 1.3.6.1.4.1.2623.4.1.1.4.3.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER stateless(1), stateful(2)  

lanIpv6LifeTime 1.3.6.1.4.1.2623.4.1.1.4.3.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 120..60480  

lanIpv6DhcpPoolStartPrefix 1.3.6.1.4.1.2623.4.1.1.4.3.6
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lanIpv6DhcpPoolStart 1.3.6.1.4.1.2623.4.1.1.4.3.7
Value Range: 0001-ffff
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

lanIpv6DhcpPoolEndPrefix 1.3.6.1.4.1.2623.4.1.1.4.3.8
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

lanIpv6DhcpPoolEnd 1.3.6.1.4.1.2623.4.1.1.4.3.9
Value Range: 0001-ffff
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..4)  

dns-setting-ipv6 1.3.6.1.4.1.2623.4.1.1.4.4
OBJECT IDENTIFIER    

ipv6ConnectToDNSServerAuto 1.3.6.1.4.1.2623.4.1.1.4.4.1
Allows this router to get the DNS IP address from the ISP automatically.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

ipv6DNSServer1 1.3.6.1.4.1.2623.4.1.1.4.4.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

ipv6DNSServer2 1.3.6.1.4.1.2623.4.1.1.4.4.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

ipv6DNSServer3 1.3.6.1.4.1.2623.4.1.1.4.4.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

auto-configuration-setting 1.3.6.1.4.1.2623.4.1.1.4.5
OBJECT IDENTIFIER    

enableRouterAdvertisement 1.3.6.1.4.1.2623.4.1.1.4.5.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

vpn-server-setting 1.3.6.1.4.1.2623.4.1.1.5.1
OBJECT IDENTIFIER    

general-setting 1.3.6.1.4.1.2623.4.1.1.5.1.1
OBJECT IDENTIFIER    

basic-config-vpn 1.3.6.1.4.1.2623.4.1.1.5.1.1.1
OBJECT IDENTIFIER    

enableVPNServer 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER off(0), on(1)  

vpnServerMode 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pptp(1), openVPN(2)  

sambaSupport 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

exportOVPNCfgFile 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.4
OBJECT IDENTIFIER    

oVPNCfgFileTftpSrv 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.4.1
Tftp server ip.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

oVPNCfgFileExport 1.3.6.1.4.1.2623.4.1.1.5.1.1.1.4.2
Export OpenVPN configuration file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER export(1), nothing(2)  

username-and-password 1.3.6.1.4.1.2623.4.1.1.5.1.1.2
OBJECT IDENTIFIER    

vpnUserTable 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1
VPN user list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VpnUserEntry

vpnUserEntry 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  VpnUserEntry  

vpnUserIndex 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.1
VPN user index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..16  

vpnUserUserName 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.2
User name of vpn user list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

vpnUserPassword 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.3
Password of vpn user list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

vpnConnectionStatus 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.4
Connectin status of the user.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

vpnIp 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.5
VPN Ip.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vpnRemoteIp 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.6
Remote ip of vpn client.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

vpnUserDelEntry 1.3.6.1.4.1.2623.4.1.1.5.1.1.2.1.1.7
Delete the vpn user enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vpn-advnaced-settings 1.3.6.1.4.1.2623.4.1.1.5.1.2
OBJECT IDENTIFIER    

vbroadcastSupport 1.3.6.1.4.1.2623.4.1.1.5.1.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), lan-to-vpn-client(2), vpn-client-to-lan(3), both(4)  

vAuthentication 1.3.6.1.4.1.2623.4.1.1.5.1.2.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER auto(1), ms-chapv1(2), ms-chapv2(3)  

vmppeEncryption 1.3.6.1.4.1.2623.4.1.1.5.1.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS mppe-128(0), mppe-40(1), no-encryption(2)  

vconnectToDNSServerAuto 1.3.6.1.4.1.2623.4.1.1.5.1.2.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vDNSServer1 1.3.6.1.4.1.2623.4.1.1.5.1.2.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

vDNSServer2 1.3.6.1.4.1.2623.4.1.1.5.1.2.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

vconnectToWINSServerAuto 1.3.6.1.4.1.2623.4.1.1.5.1.2.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vWINSServer1 1.3.6.1.4.1.2623.4.1.1.5.1.2.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

vWINSServer2 1.3.6.1.4.1.2623.4.1.1.5.1.2.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

vMRU 1.3.6.1.4.1.2623.4.1.1.5.1.2.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vMTU 1.3.6.1.4.1.2623.4.1.1.5.1.2.11
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

vclientStartIPAddress 1.3.6.1.4.1.2623.4.1.1.5.1.2.12
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

vclientEndIPAddress 1.3.6.1.4.1.2623.4.1.1.5.1.2.13
Maximum 10 clients
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..255  

vpn-client-setting 1.3.6.1.4.1.2623.4.1.1.5.2
OBJECT IDENTIFIER    

vpnServerTable 1.3.6.1.4.1.2623.4.1.1.5.2.1
VPN server list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    VpnServerEntry

vpnServerEntry 1.3.6.1.4.1.2623.4.1.1.5.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  VpnServerEntry  

vpnServerIndex 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.1
VPN server index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..10  

vpnServerDesc 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.2
Description of vpn server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

vpnServerType 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.3
There can be only one OpenVPN profile.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pptp(1), l2tp(2), openVPN(3), none(0)  

vpnServerIP 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

vpnServerUsername 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.5
User name of VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

vpnServerPwd 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.6
Password of VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

vpnServerConnectionStatus 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.7
Connectin status of VPN server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), disconnected(2)  

vpnServerDelEntry 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.8
Delete the VPN server entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

vpnServerConnect 1.3.6.1.4.1.2623.4.1.1.5.2.1.1.9
Connect to the VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER connect(1), disconnect(2), nothing(3)  

openVPNFile 1.3.6.1.4.1.2623.4.1.1.5.2.2
OBJECT IDENTIFIER    

openVPNImportFile 1.3.6.1.4.1.2623.4.1.1.5.2.2.1
OBJECT IDENTIFIER    

openVPNTftpSrv 1.3.6.1.4.1.2623.4.1.1.5.2.2.1.1
Tftp server ip.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

openVPNFileType 1.3.6.1.4.1.2623.4.1.1.5.2.2.1.2
Type of imported file. ovnp: .ovpn file ca: Certificate Authority cert: Client Certificate key: Client Key static: Static Key
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER ovpn(1), ca(2), cert(3), key(4), static(5), none(0)  

openVPNFileName 1.3.6.1.4.1.2623.4.1.1.5.2.2.1.3
The file name of the .vpn file or CA file which will be imported to the device.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

openVPNFileImport 1.3.6.1.4.1.2623.4.1.1.5.2.2.1.4
Import will upload the .vpn file or CA file to the device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER import(1), nothing(2)  

openVPNManualSetting 1.3.6.1.4.1.2623.4.1.1.5.2.2.2
OBJECT IDENTIFIER    

openVPNCertAuth 1.3.6.1.4.1.2623.4.1.1.5.2.2.2.1
Certificate Authority
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

openVPNClientCert 1.3.6.1.4.1.2623.4.1.1.5.2.2.2.2
Client Certificate
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

openVPNClientKey 1.3.6.1.4.1.2623.4.1.1.5.2.2.2.3
Client Key
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

openVPNStaticKey 1.3.6.1.4.1.2623.4.1.1.5.2.2.2.4
Static Key(Optional)
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

firewall-general 1.3.6.1.4.1.2623.4.1.1.6.1
OBJECT IDENTIFIER    

enableFirewall 1.3.6.1.4.1.2623.4.1.1.6.1.1
Disabling the firewall will deactivate all the related functions.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

enableDoSProtection 1.3.6.1.4.1.2623.4.1.1.6.1.2
A 'denial-of-service' attack is an explicit attempt to deny legitimate users from using a service or computer resource. Enabling this feature can protect the router from DoS attack but it would increase the router's workload.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

loggedPacketsType 1.3.6.1.4.1.2623.4.1.1.6.1.3
This field indicates the kind of packets logged between LAN and WAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dropped(2), accepted(3), both(4)  

respondPingRequestfromWAN 1.3.6.1.4.1.2623.4.1.1.6.1.4
This feature allows you to respond to ping request from WAN.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

url-filter 1.3.6.1.4.1.2623.4.1.1.6.2
OBJECT IDENTIFIER    

basic-config-url 1.3.6.1.4.1.2623.4.1.1.6.2.1
OBJECT IDENTIFIER    

enableURLFilter 1.3.6.1.4.1.2623.4.1.1.6.2.1.1
This field defines the dates that URL filter will be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

url-filter-list 1.3.6.1.4.1.2623.4.1.1.6.2.2
OBJECT IDENTIFIER    

urlFilterTable 1.3.6.1.4.1.2623.4.1.1.6.2.2.1
URL filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UrlFilterEntry

urlFilterEntry 1.3.6.1.4.1.2623.4.1.1.6.2.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  UrlFilterEntry  

urlFilterIndex 1.3.6.1.4.1.2623.4.1.1.6.2.2.1.1.1
URL Filter Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..128  

urlFilterUrl 1.3.6.1.4.1.2623.4.1.1.6.2.2.1.1.2
URL of url filter list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

urlFilterDelEntry 1.3.6.1.4.1.2623.4.1.1.6.2.2.1.1.3
Delete the url filter enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

keyword-filter 1.3.6.1.4.1.2623.4.1.1.6.3
OBJECT IDENTIFIER    

basic-config-keyword 1.3.6.1.4.1.2623.4.1.1.6.3.1
OBJECT IDENTIFIER    

enableKeywordFilter 1.3.6.1.4.1.2623.4.1.1.6.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

keyword-filter-list 1.3.6.1.4.1.2623.4.1.1.6.3.2
OBJECT IDENTIFIER    

keywordFilterTable 1.3.6.1.4.1.2623.4.1.1.6.3.2.1
Keyword filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    KeywordFilterEntry

keywordFilterEntry 1.3.6.1.4.1.2623.4.1.1.6.3.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  KeywordFilterEntry  

keywordFilterIndex 1.3.6.1.4.1.2623.4.1.1.6.3.2.1.1.1
Keyword Filter Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..128  

keywordFilterKeyword 1.3.6.1.4.1.2623.4.1.1.6.3.2.1.1.2
Keyword of keyword filter list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

keywordFilterDelEntry 1.3.6.1.4.1.2623.4.1.1.6.3.2.1.1.3
Delete the keyword filter enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

network-services-filter 1.3.6.1.4.1.2623.4.1.1.6.4
OBJECT IDENTIFIER    

enableNetworkServicesFilter 1.3.6.1.4.1.2623.4.1.1.6.4.1
Select [Yes] to enable filter that specify IP or port for control incoming and outgoing packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

filterTableType 1.3.6.1.4.1.2623.4.1.1.6.4.2
Select either White List or Black List to accept or reject those LAN to WAN packet exchanges for clients specified in the filter table.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER white-list(1), black-list(2)  

weekDaysEnableLANtoWANFilter 1.3.6.1.4.1.2623.4.1.1.6.4.3
This field defines the dates that LAN to WAN filter will be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS monday(0), tuesday(1), wednesday(2), thursday(3), friday(4)  

weekDaysFilterStartTimeH 1.3.6.1.4.1.2623.4.1.1.6.4.4
Hour of starting time of weekdays to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysFilterStartTimeM 1.3.6.1.4.1.2623.4.1.1.6.4.5
Minute of starting time of weekdays to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekDaysFilterEndTimeH 1.3.6.1.4.1.2623.4.1.1.6.4.6
Hour of ending time of weekdays to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekDaysFilterEndTimeM 1.3.6.1.4.1.2623.4.1.1.6.4.7
Minute of ending time of weekdays to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendEnableLANtoWANFilter 1.3.6.1.4.1.2623.4.1.1.6.4.8
This field defines the dates that LAN to WAN filter will be enabled.
Status: current Access: read-write
OBJECT-TYPE    
  BITS saturday(0), sunday(1)  

weekendFilterStartTimeH 1.3.6.1.4.1.2623.4.1.1.6.4.9
Hour of starting time of weekend to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendFilterStartTimeM 1.3.6.1.4.1.2623.4.1.1.6.4.10
Minute of starting time of weekend to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

weekendFilterEndTimeH 1.3.6.1.4.1.2623.4.1.1.6.4.11
Hour of ending time of weekend to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

weekendFilterEndTimeM 1.3.6.1.4.1.2623.4.1.1.6.4.12
Minute of ending time of weekend to enable Network Services Filter.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

filteredICMPPacketTypes 1.3.6.1.4.1.2623.4.1.1.6.4.13
This field defines a list of LAN to WAN ICMP packets type that will be filtered. For example, if you would like to filter Echo(type 8) and Echo Reply(type 0) ICMP packets, you need to enter a string with numbers separated by blank, such as, [0 8].
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

networkServicesFilterTable 1.3.6.1.4.1.2623.4.1.1.6.4.14
Network services filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    NetworkServicesFilterEntry

networkServicesFilterEntry 1.3.6.1.4.1.2623.4.1.1.6.4.14.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  NetworkServicesFilterEntry  

networkServicesFilterIndex 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.1
Network Services Filter Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

networkServicesFilterSourceIP 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.2
For source or destination IP address, you can : (a) enter a specific IP address, such as '192.168.122.1'; (b) enter IP addresses within one subnet or within the same IP pool, such as '192.168.123.*', or '192.168.*.*'; or (c) enter all IP addresses as '*.*.*.*'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

networkServicesFilterSourcePortRange 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.3
For source or destination port range, you can either : a) enter a specific port, such as '95'; or b) enter ports within a range, such as '103:315', '>100', or '<65535'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

networkServicesFilterDestinationIP 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.4
For source or destination IP address, you can : (a) enter a specific IP address, such as '192.168.122.1'; (b) enter IP addresses within one subnet or within the same IP pool, such as '192.168.123.*', or '192.168.*.*'; or (c) enter all IP addresses as '*.*.*.*'.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

networkServicesFilterDestinationPortRange 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.5
For source or destination port range, you can either : a) enter a specific port, such as '95'; or b) enter ports within a range, such as '103:315', '>100', or '<65535'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

networkServicesFilterProtocol 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.6
Protocol type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), tcp-all(2), tcp-syn(3), tcp-ack(4), tcp-fin(5), tcp-rst(6), tcp-urg(7), tcp-psh(8), udp(9), none(0)  

networkServicesFilterDelEntry 1.3.6.1.4.1.2623.4.1.1.6.4.14.1.7
Delete the network services filter enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

ipv6-firewall 1.3.6.1.4.1.2623.4.1.1.6.5
OBJECT IDENTIFIER    

enableIpv6Firewall 1.3.6.1.4.1.2623.4.1.1.6.5.1
Select [Yes] to enable IPv6 firewall.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

inboundFirewallRulesTable 1.3.6.1.4.1.2623.4.1.1.6.5.2
Network services filter list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    InboundFirewallRulesEntry

inboundFirewallRulesEntry 1.3.6.1.4.1.2623.4.1.1.6.5.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  InboundFirewallRulesEntry  

inboundFirewallRulesIndex 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.1
Inbound firewall rules Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..128  

inboundFirewallRulesServiceName 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

inboundFirewallRulesRemoteIP 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

inboundFirewallRulesLocalIP 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.4
Key in the LAN client's IP address.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

inboundFirewallRulesPortRange 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.5
Port range accepts various formats such as Port Range (300:350), individual ports (566,789) or Mix (1015:1024,3021).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..11)  

inboundFirewallRulesProtocol 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.6
Protocol type.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), both(3), other(4), none(0)  

inboundFirewallRulesDelEntry 1.3.6.1.4.1.2623.4.1.1.6.5.2.1.7
Delete the inbound firewall rule.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

operation-mode 1.3.6.1.4.1.2623.4.1.1.7.1
OBJECT IDENTIFIER    

operationMode 1.3.6.1.4.1.2623.4.1.1.7.1.1
RT-AC68U supports several operation modes to meet different requirements. Please select the mode that match your situation. * In wireless router/ IP sharing mode, RT-AC68U connects to the Internet via PPPoE, DHCP, PPTP, L2TP, or Static IP and shares the wireless network to LAN clients or devices. In this mode, NAT, firewall, and DHCP server are enabled by default. UPnP and Dynamic DNS are supported for SOHO and home users. Select this mode if you are a first-time user or you are not currently using any wired/wireless routers. * In Repeater mode, RT-AC68U wirelessly connects to an existing wireless network to extend the wireless coverage. In this mode, the firewall, IP sharing, and NAT functions are disabled. * In Access Point (AP) mode, RT-AC68U connects to a wireless router through an Ethernet cable to extend the wireless signal coverage to other network clients. In this mode, the firewall, IP sharing, and NAT functions are disabled by default. * RT-AC68U can be configured in Media bridge mode.The Media Bridge mode provides the fastest 802.11ac Wi-Fi connection for multiple media devices simultaneously. To set up the Media Bridge mode, you need two RT-AC68U: one configured as the Media station and the other as a router.Configure one RT-AC68U as a router and another RT-AC68U as an 802.11ac Media bridge to provide a simultaneous 802.11ac Wi-Fi connection for your media devices such as computer, Smart TV, game console, DVR, or media player via Ethernet cable.Change to Media Bridge mode to provide a simultaneous 802.11ac Wi-Fi connection for your media devices. In media bridge mode, only wireless devices connect to the P-AP. Client devices need to be connected to the media bridge with a network cable.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER wireless-router-mode(1), repeater-mode(2), access-point-mode(3), media-bridge(4)  

system 1.3.6.1.4.1.2623.4.1.1.7.2
OBJECT IDENTIFIER    

login-password 1.3.6.1.4.1.2623.4.1.1.7.2.1
OBJECT IDENTIFIER    

routerLoginName 1.3.6.1.4.1.2623.4.1.1.7.2.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..20)  

newPassword 1.3.6.1.4.1.2623.4.1.1.7.2.1.2
Password cannot be greater than 16 characters.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

miscellaneous 1.3.6.1.4.1.2623.4.1.1.7.2.2
OBJECT IDENTIFIER    

wpsButtonBehavior 1.3.6.1.4.1.2623.4.1.1.7.2.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER toggle-radio(1), activate-wps(2)  

remoteLogServer 1.3.6.1.4.1.2623.4.1.1.7.2.2.2
This field allows to assign a remote server to record log messages of RT-AC68U. If you leave it blank, the system will record up to 1024 messages on RT-AC68U.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

timeZone 1.3.6.1.4.1.2623.4.1.1.7.2.2.3
1 (GMT-12:00) Eniwetok, Kwajalein 2 (GMT-11:00) Midway Island, Samoa 3 (GMT-10:00) Hawaii 4 (GMT-09:00) Alaska 5 (GMT-08:00) Pacific Time (US, Canada) 6 (GMT-07:00) Mountain Time (US, Canada) 7 (GMT-07:00) Arizona 8 (GMT-07:00) Chihuahua, La Paz, Mazatlan 9 (GMT-06:00) Central Time (US, Canada) 10 (GMT-06:00) Saskatchewan 11 (GMT-06:00) Guadalajara, Mexico City 12 (GMT-06:00) Monterrey 13 (GMT-06:00) Central America 14 (GMT-05:00) Eastern Time (US, Canada) 15 (GMT-05:00) Indiana (East) 16 (GMT-05:00) Bogota, Lima, Quito 17 (GMT-04:00) Atlantic Time (Canada) 18 (GMT-04:00) Caracas, La Paz 19 (GMT-04:00) Santiago 20 (GMT-03:30) Newfoundland 21 (GMT-03:00) Brasilia 22 (GMT-03:00) Buenos Aires, Georgetown 23 (GMT-03:00) Greenland 24 (GMT-02:00) Mid-Atlantic 25 (GMT-01:00) Azores 26 (GMT-01:00) Cape Verde Is. 27 (GMT) Greenwich Mean Time 28 (GMT) Dublin, Edinburgh, Lisbon, London 29 (GMT) Casablanca, Monrovia 30 (GMT+01:00) Belgrade, Bratislava, Budapest 31 (GMT+01:00) Ljubljana, Prague 32 (GMT+01:00) Sarajevo, Skopje, Sofija 33 (GMT+01:00) Vilnius, Warsaw, Zagreb 34 (GMT+01:00) Brussels, Copenhagen 35 (GMT+01:00) Madrid, Paris 36 (GMT+01:00) Amsterdam, Berlin, Bern 37 (GMT+01:00) Rome, Stockholm, Vienna 38 (GMT+01:00) West Central Africa 39 (GMT+02:00) Bucharest 40 (GMT+02:00) Cairo 41 (GMT+02:00) Helsinki, Riga, Tallinn 42 (GMT+02:00) Athens, Istanbul, Minsk 43 (GMT+02:00) Jerusalem 44 (GMT+02:00) Harare, Pretoria 45 (GMT+02:00) Ukraine 46 (GMT+03:00) Kaliningrad, Kuwait, Riyadh 47 (GMT+03:00) Nairobi 48 (GMT+03:00) Baghdad 49 (GMT+03:30) Tehran 50 (GMT+04:00) Moscow, St. Petersburg 51 (GMT+04:00) Volgograd 52 (GMT+04:00) Abu Dhabi, Muscat 53 (GMT+04:00) Baku, Tbilisi, Yerevan 54 (GMT+04:30) Kabul 55 (GMT+05:00) Islamabad, Karachi, Tashkent 56 (GMT+05:30) Calcutta, Chennai 57 (GMT+05:30) Mumbai, New Delhi 58 (GMT+05:30) Sri Jayawardenepura 59 (GMT+05:45) Kathmandu 60 (GMT+06:00) Almaty 61 (GMT+06:00) Yekaterinburg 62 (GMT+06:00) Astana, Dhaka 63 (GMT+06:30) Rangoon 64 (GMT+07:00) Bangkok, Hanoi, Jakarta, Novosibirsk 65 (GMT+08:00) Krasnoyarsk 66 (GMT+08:00) Beijing, Hong Kong 67 (GMT+08:00) Chongqing, Urumqi 68 (GMT+08:00) Kuala Lumpur, Singapore 69 (GMT+08:00) Taipei 70 (GMT+08:00) Perth 71 (GMT+08:00) Ulaan Bataar 72 (GMT+09:00) Irkutsk, Seoul 73 (GMT+09:00) Osaka, Sapporo, Tokyo 74 (GMT+09:30) Darwin 75 (GMT+09:30) Adelaide 76 (GMT+10:00) Yakutsk 77 (GMT+10:00) Canberra, Melbourne, Sydney 78 (GMT+10:00) Brisbane 79 (GMT+10:00) Hobart 80 (GMT+10:00) Guam, Port Moresby 81 (GMT+11:00) Vladivostok 82 (GMT+11:00) Solomon Is. 83 (GMT+11:00) New Caledonia 84 (GMT+12:00) Magadan, Fiji, Kamchatka, Marshall Is. 85 (GMT+12:00) Auckland, Wellington 86 (GMT+13:00) Nuku'alofa
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..86  

manuallySetDaylightSaveingTime 1.3.6.1.4.1.2623.4.1.1.7.2.2.4
Manually set the daylight saving time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

dstStartTimeMonth 1.3.6.1.4.1.2623.4.1.1.7.2.2.5
The month of DST start time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mJanuary(1), mFebruary(2), mMarch(3), mApril(4), mMay(5), mJune(6), mJuly(7), mAugust(8), mSeptember(9), mOctober(10), mNovember(11), mDecember(12)  

dstStartTimeWeek 1.3.6.1.4.1.2623.4.1.1.7.2.2.6
The week of DST start time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

dstStartTimeWeekday 1.3.6.1.4.1.2623.4.1.1.7.2.2.7
The weekday of DST start time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

dstStartTimeHour 1.3.6.1.4.1.2623.4.1.1.7.2.2.8
The hour of DST start time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

dstEndTimeMonth 1.3.6.1.4.1.2623.4.1.1.7.2.2.9
The month of DST end time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER mJanuary(1), mFebruary(2), mMarch(3), mApril(4), mMay(5), mJune(6), mJuly(7), mAugust(8), mSeptember(9), mOctober(10), mNovember(11), mDecember(12)  

dstEndTimeWeek 1.3.6.1.4.1.2623.4.1.1.7.2.2.10
The week of DST end time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1..5  

dstEndTimeWeekday 1.3.6.1.4.1.2623.4.1.1.7.2.2.11
The weekday of DST end time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..6  

dstEndTimeHour 1.3.6.1.4.1.2623.4.1.1.7.2.2.12
The hour of DST end time.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

ntpServer 1.3.6.1.4.1.2623.4.1.1.7.2.2.13
To synchronize your system time with NTP Server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

enableTelnet 1.3.6.1.4.1.2623.4.1.1.7.2.2.14
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

authenticationMethod 1.3.6.1.4.1.2623.4.1.1.7.2.2.15
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER http(1), https(2), both(3)  

httpsLanPort 1.3.6.1.4.1.2623.4.1.1.7.2.2.16
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

enableWebAccessfromWAN 1.3.6.1.4.1.2623.4.1.1.7.2.2.17
This feature allows you to configure the wireless router via the Internet. The default port is 8080 and you can use http://[WAN IP]:8080 or http://[DDNS name]:8080 to launch the wireless router's web user interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

httpPortWebAccessfromWAN 1.3.6.1.4.1.2623.4.1.1.7.2.2.18
To specify the port used to config RT-AC68U from the Internet( 1024:65535 ).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

httpsPortWebAccessfromWAN 1.3.6.1.4.1.2623.4.1.1.7.2.2.19
To specify the port used to config RT-AC68U from the Internet( 1024:65535 ).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 1024..65535  

autoLogout 1.3.6.1.4.1.2623.4.1.1.7.2.2.20
Time to logout automatically. 0 means to disable the function of auto logout.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..999  

onlyAllowSpecificIP 1.3.6.1.4.1.2623.4.1.1.7.2.2.21
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

mScanClientListAct 1.3.6.1.4.1.2623.4.1.1.7.2.2.22
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

mScanClientTable 1.3.6.1.4.1.2623.4.1.1.7.2.2.23
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MScanClientEntry

mScanClientEntry 1.3.6.1.4.1.2623.4.1.1.7.2.2.23.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  MScanClientEntry  

mScanClientIndex 1.3.6.1.4.1.2623.4.1.1.7.2.2.23.1.1
Client entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

mScanClientIPAddr 1.3.6.1.4.1.2623.4.1.1.7.2.2.23.1.2
MAC address of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

mScanClientName 1.3.6.1.4.1.2623.4.1.1.7.2.2.23.1.3
Name of the client list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

mClientListTable 1.3.6.1.4.1.2623.4.1.1.7.2.2.24
Specified IP address list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MClientListEntry

mClientListEntry 1.3.6.1.4.1.2623.4.1.1.7.2.2.24.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  MClientListEntry  

mClientListIndex 1.3.6.1.4.1.2623.4.1.1.7.2.2.24.1.1
Client Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

mClientListClient 1.3.6.1.4.1.2623.4.1.1.7.2.2.24.1.2
IP address of client list.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

mClientListDelEntry 1.3.6.1.4.1.2623.4.1.1.7.2.2.24.1.3
Delete the specified IP client entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

firmware-upgrade 1.3.6.1.4.1.2623.4.1.1.7.3
OBJECT IDENTIFIER    

fTftpSrv 1.3.6.1.4.1.2623.4.1.1.7.3.1
Tftp server ip.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

fTftpFile 1.3.6.1.4.1.2623.4.1.1.7.3.2
The file name of the firmware which will be uploaded to the device.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

fFirmwareUpgrade 1.3.6.1.4.1.2623.4.1.1.7.3.3
Upgrade firmware or not. When the firmware upgrading, please don't power off the device, and wait for 80 seconds to reconnect to device.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER upgrade(1), nothing(2)  

setting-management 1.3.6.1.4.1.2623.4.1.1.7.4
OBJECT IDENTIFIER    

sTftpSrv 1.3.6.1.4.1.2623.4.1.1.7.4.1
Tftp server ip.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

sTftpFile 1.3.6.1.4.1.2623.4.1.1.7.4.2
The file name of the config file which will be uploaded to the device or downloaded to the local PC.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sTftpAction 1.3.6.1.4.1.2623.4.1.1.7.4.3
The actions of tftp. 'Get' will get config file from remote PC to device, and 'Put' will upload config file from device to remote PC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER get(1), put(2), nothing(3)  

snmp-setup 1.3.6.1.4.1.2623.4.1.1.7.5
OBJECT IDENTIFIER    

snmpEnable 1.3.6.1.4.1.2623.4.1.1.7.5.1
Enable SNMP.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

snSystemName 1.3.6.1.4.1.2623.4.1.1.7.5.2
The value of this object is the system name of the device. This value will be seen in the remote SNMP agent discovery result, and can be gotten and set by MIB browser and WEB.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

snLocation 1.3.6.1.4.1.2623.4.1.1.7.5.3
The value of this object is the system location of the device. This value will be seen in the remote SNMP agent discovery result, and can be gotten and set by MIB browser and WEB.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

snContact 1.3.6.1.4.1.2623.4.1.1.7.5.4
The value of this object is the system contact information of the device. This value will be seen in the remote SNMP agent discovery result, and can be gotten and set by MIB browser and WEB.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

snGetCommunity 1.3.6.1.4.1.2623.4.1.1.7.5.5
The value of this object is the read-write community used in the SNMPv1 and SNMPv2c. The community string can be gotten and set by MIB browser and WEB.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snSetCommunity 1.3.6.1.4.1.2623.4.1.1.7.5.6
The value of this object is the read-only community used in the SNMPv1 and SNMPv2c. The community string can be gotten and set by MIB browser and WEB.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

snmpV3Setting 1.3.6.1.4.1.2623.4.1.1.7.5.7
OBJECT IDENTIFIER    

authProtocol 1.3.6.1.4.1.2623.4.1.1.7.5.7.1
The value of this object shows SNMPv3 authentication protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), md5(2), sha(3)  

authPass 1.3.6.1.4.1.2623.4.1.1.7.5.7.2
The authentication password. SNMPv3 pass phrases must be at least 8 characters long.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8..64)  

privProtocol 1.3.6.1.4.1.2623.4.1.1.7.5.7.3
The value of this object shows SNMPv3 privacy protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), des(2), aes(3)  

privPass 1.3.6.1.4.1.2623.4.1.1.7.5.7.4
The privacy password. SNMPv3 passphrases must be at least 8 characters long.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(8..64)  

snVersion 1.3.6.1.4.1.2623.4.1.1.7.5.8
The value of this object is the MIB version device supports.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

systemCommand 1.3.6.1.4.1.2623.4.1.1.7.6
1 commit 2 reboot 3 factoryDefault 4 restart_wireless 5 restart_net_and_phy 6 restart_net 7 restart_wan_if 8 restart_firewall 9 restart_ddns 10 restart_pppoe_relay 11 restart_allnet 12 restart_pptpd 13 restart_all 14 restart_time 15 restart_qos 16 restart_upnp 17 restart_ntpc 18 restart_snmpd 19 wps_apply 20 reset_wps 21 nothing
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER commit(1), reboot(2), factoryDefault(3), restart-wireless(4), restart-net-and-phy(5), restart-net(6), restart-wan-if(7), restart-firewall(8), restart-ddns(9), restart-pppoe-relay(10), restart-allnet(11), restart-pptpd(12), restart-all(13), restart-time(14), restart-qos(15), restart-upnp(16), restart-ntpc(17), restart-snmpd(18), wps-apply(19), reset-wps(20), nothing(21)  

general-log 1.3.6.1.4.1.2623.4.1.1.8.1
OBJECT IDENTIFIER    

systemTime 1.3.6.1.4.1.2623.4.1.1.8.1.1
Tok_String
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

upTime 1.3.6.1.4.1.2623.4.1.1.8.1.2
The value of this oject is the elapsed time (in hundredths of a second) since system boot.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

saveSysLog 1.3.6.1.4.1.2623.4.1.1.8.1.3
OBJECT IDENTIFIER    

sysLogTftpSrv 1.3.6.1.4.1.2623.4.1.1.8.1.3.1
Tftp server ip.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..39)  

sysLogTftpFile 1.3.6.1.4.1.2623.4.1.1.8.1.3.2
The file name of the syslog file which will be saved to the local PC. Default name is syslog.txt.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

sysLogSaveAct 1.3.6.1.4.1.2623.4.1.1.8.1.3.3
Select 'Save' to save syslog file to the local PC.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER save(1), nothing(2)  

wireless-log 1.3.6.1.4.1.2623.4.1.1.8.2
OBJECT IDENTIFIER    

logWl2g 1.3.6.1.4.1.2623.4.1.1.8.2.1
OBJECT IDENTIFIER    

bssInfoWl2g 1.3.6.1.4.1.2623.4.1.1.8.2.1.1
The value of this object shows the bss info of the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gRefreshSta 1.3.6.1.4.1.2623.4.1.1.8.2.1.2
Get/Refresh station table of wireless 2g.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER refresh(1), nothing(2)  

wl2gStationTable 1.3.6.1.4.1.2623.4.1.1.8.2.1.3
2.4G station list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wl2gStationEntry

wl2gStationEntry 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Wl2gStationEntry  

wl2gStationIndex 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.1
2.4G Station List Index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

wl2gStationMACAddr 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.2
The MAC address of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gAssociated 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.3
Show the associated state of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gAuthorized 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.4
Show the authorized state of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gRSSI 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.5
Show the RSSI(dBm) of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gPSM 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.6
Show the PSM of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gTxRate 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.7
The Tx Rate of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gRxRate 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.8
The Rx Rate of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl2gStationConnectTime 1.3.6.1.4.1.2623.4.1.1.8.2.1.3.1.9
The value of this oject is the elapsed time (in hundredths of a second) since the 2.4G station connects to RT-AC68U.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

logWl5g 1.3.6.1.4.1.2623.4.1.1.8.2.2
OBJECT IDENTIFIER    

bssInfoWl5g 1.3.6.1.4.1.2623.4.1.1.8.2.2.1
The value of this object shows the bss info of the device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gRefreshSta 1.3.6.1.4.1.2623.4.1.1.8.2.2.2
Get/Refresh station table of wireless 5g.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER refresh(1), nothing(2)  

wl5gStationTable 1.3.6.1.4.1.2623.4.1.1.8.2.2.3
5G station list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wl5gStationEntry

wl5gStationEntry 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Wl5gStationEntry  

wl5gStationIndex 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.1
5G Station List Index
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

wl5gStationMACAddr 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.2
The MAC address of 5G station list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gAssociated 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.3
Show the associated state of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gAuthorized 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.4
Show the authorized state of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gRSSI 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.5
Show the RSSI(dBm) of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gPSM 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.6
Show the PSM of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gTxRate 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.7
The Tx Rate of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gRxRate 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.8
The Rx Rate of 2.4G station.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

wl5gStationConnectTime 1.3.6.1.4.1.2623.4.1.1.8.2.2.3.1.9
The value of this oject is the elapsed time (in hundredths of a second) since the 2.4G station connects to RT-AC68U.
Status: current Access: read-only
OBJECT-TYPE    
  TimeTicks  

dhcp-leases 1.3.6.1.4.1.2623.4.1.1.8.3
OBJECT IDENTIFIER    

dhcpLeasesTable 1.3.6.1.4.1.2623.4.1.1.8.3.1
DHCP leases list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    DhcpLeasesEntry

dhcpLeasesEntry 1.3.6.1.4.1.2623.4.1.1.8.3.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  DhcpLeasesEntry  

dhcpLeasesIndex 1.3.6.1.4.1.2623.4.1.1.8.3.1.1.1
DHCP Leases List Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..253  

dhcpLeasesHostName 1.3.6.1.4.1.2623.4.1.1.8.3.1.1.2
The host name of DHCP leases list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

dhcpLeasesIPAddr 1.3.6.1.4.1.2623.4.1.1.8.3.1.1.3
The IP address of DHCP leases list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

dhcpLeasesMACAddr 1.3.6.1.4.1.2623.4.1.1.8.3.1.1.4
The MAC address of DHCP leases list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

dhcpLeasesExpires 1.3.6.1.4.1.2623.4.1.1.8.3.1.1.5
The expires of DHCP leases list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6-log 1.3.6.1.4.1.2623.4.1.1.8.4
OBJECT IDENTIFIER    

ipv6ConnectionType 1.3.6.1.4.1.2623.4.1.1.8.4.1
IPv6 Connection Type.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6WanAddress 1.3.6.1.4.1.2623.4.1.1.8.4.2
WAN IPv6 Address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6WanGateway 1.3.6.1.4.1.2623.4.1.1.8.4.3
WAN IPv6 Gateway.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanAddress 1.3.6.1.4.1.2623.4.1.1.8.4.4
LAN IPv6 Address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanLinkLocalAddress 1.3.6.1.4.1.2623.4.1.1.8.4.5
LAN IPv6 Link-Local Address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6DhcpPd 1.3.6.1.4.1.2623.4.1.1.8.4.6
DHCP-PD.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanPrefix 1.3.6.1.4.1.2623.4.1.1.8.4.7
LAN IPv6 Prefix.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6DnsAddress 1.3.6.1.4.1.2623.4.1.1.8.4.8
DNS Address.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanDevicesTable 1.3.6.1.4.1.2623.4.1.1.8.4.9
IPv6 LAN devices list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ipv6LanDeviceEntry

ipv6LanDeviceEntry 1.3.6.1.4.1.2623.4.1.1.8.4.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6LanDeviceEntry  

ipv6LanDeviceIndex 1.3.6.1.4.1.2623.4.1.1.8.4.9.1.1
IPv6 LAN Devices Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..253  

ipv6LanDeviceHostName 1.3.6.1.4.1.2623.4.1.1.8.4.9.1.2
The host name of IPv6 LAN device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanDeviceMACAddr 1.3.6.1.4.1.2623.4.1.1.8.4.9.1.3
The MAC address of IPv6 LAN device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6LanDeviceIPv6Addr 1.3.6.1.4.1.2623.4.1.1.8.4.9.1.4
The IPv6 address of IPv6 LAN device.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

routing-table 1.3.6.1.4.1.2623.4.1.1.8.5
OBJECT IDENTIFIER    

routingTable 1.3.6.1.4.1.2623.4.1.1.8.5.1
Routing list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RoutingEntry

routingEntry 1.3.6.1.4.1.2623.4.1.1.8.5.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  RoutingEntry  

routingIndex 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.1
Routing rule Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

routingDestination 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.2
The destination of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

routingGateway 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.3
The gateway of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

routingGenmask 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.4
The genmask of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

routingFlags 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.5
The flags of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

routingMetric 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.6
The metric of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

routingRef 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.7
The ref of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

routingUse 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.8
The use of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

routingIface 1.3.6.1.4.1.2623.4.1.1.8.5.1.1.9
The Iface of routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6RoutingTable 1.3.6.1.4.1.2623.4.1.1.8.5.2
IPv6 Routing table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Ipv6RoutingEntry

ipv6RoutingEntry 1.3.6.1.4.1.2623.4.1.1.8.5.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6RoutingEntry  

ipv6RoutingIndex 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.1
IPv6 Routing rule Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..64  

ipv6RoutingDest 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.2
The destination of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6RoutingNextHop 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.3
The gateway of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6RoutingFlags 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.4
The flags of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

ipv6RoutingMetric 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.5
The metric of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipv6RoutingRef 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.6
The ref of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipv6RoutingUse 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.7
The use of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

ipv6RoutingIface 1.3.6.1.4.1.2623.4.1.1.8.5.2.1.8
The Iface of IPv6 routing rule.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

port-forwarding-log 1.3.6.1.4.1.2623.4.1.1.8.6
OBJECT IDENTIFIER    

portForwardingLogTable 1.3.6.1.4.1.2623.4.1.1.8.6.1
This table shows the port forwarding status. Some P2P programs use the UPnP protocol to open the port and the port number is shown on this table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PortForwardingLogEntry

portForwardingLogEntry 1.3.6.1.4.1.2623.4.1.1.8.6.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PortForwardingLogEntry  

portForwardingLogIndex 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.1
Port Forwarding List Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

portForwardingLogDestination 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.2
The destination of port forwarding list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portForwardingLogProtocol 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.3
The protocol of port forwarding list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portForwardingLogPortRange 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.4
The port range of port forwarding list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portForwardingLogRedirectTo 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.5
The redirect of port forwarding list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

portForwardingLogLocalPort 1.3.6.1.4.1.2623.4.1.1.8.6.1.1.6
The local port of port forwarding list.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

connection-log 1.3.6.1.4.1.2623.4.1.1.8.7
OBJECT IDENTIFIER    

activeConnectionTable 1.3.6.1.4.1.2623.4.1.1.8.7.1
This is the history log of active connections.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    ActiveConnectionEntry

activeConnectionEntry 1.3.6.1.4.1.2623.4.1.1.8.7.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  ActiveConnectionEntry  

activeConnectionIndex 1.3.6.1.4.1.2623.4.1.1.8.7.1.1.1
Index of active connection.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..253  

activeConnectionProto 1.3.6.1.4.1.2623.4.1.1.8.7.1.1.2
Protocol of active connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

activeConnectionNatedAddr 1.3.6.1.4.1.2623.4.1.1.8.7.1.1.3
Nated address of active connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

activeConnectionDestAddr 1.3.6.1.4.1.2623.4.1.1.8.7.1.1.4
Destination address of active connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

activeConnectionState 1.3.6.1.4.1.2623.4.1.1.8.7.1.1.5
State of active connection.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

guest-network-wl2g 1.3.6.1.4.1.2623.4.1.1.9.1
OBJECT IDENTIFIER    

wl2gGuestNetworkTable 1.3.6.1.4.1.2623.4.1.1.9.1.1
Guest network list for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wl2gGuestNetworkEntry

wl2gGuestNetworkEntry 1.3.6.1.4.1.2623.4.1.1.9.1.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Wl2gGuestNetworkEntry  

gIndexWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.1
Guest Network List Index for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..3  

gEnableWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.2
The enable of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gSSIDWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.3
The SSID of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

gAuthenticationWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.4
The authentication method of guest network list of 2G. Open system with wep key, shared key, and radius with 802.1x are only supported when wireless mode is legacy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER opensystem(1), sharedkey(2), wpa-personal(3), wpa2-personal(4), wpa-auto-personal(5), wpa-enterprise(6), wpa2-enterprise(7), wpa-auto-enterprise(8), radius-with-8021x(9)  

gWepEncryptionWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.5
The wep encryption of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep-64bits(2), wep-128bits(3)  

gKeyIndexWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.6
The key index of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

gPassphraseWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.7
The passphrase of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWpaEncryptionWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.8
The WPA encryption of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

gWpaPreSharedKeyWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.9
The WPA pre-shared key of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gAccessTimeWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.10
The access time of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER specific-time(1), limitless(2)  

gAccessTimeHWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.11
The access time (hour) of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

gAccessTimeMWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.12
The access time (minute) of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

gAccessIntranetWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.13
The access intranet of guest network list for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gEnableMacFilterWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.1.1.14
Enable MAC filter of guest network of 2G. Note: MAC filter function of primary SSID must be enabled first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

gSSIDWepKeyWl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2
OBJECT IDENTIFIER    

gWl2gSSID1WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.1.2.1
Wep key table of guest network 1 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWepKeyEntry1Wl2g

gWepKeyEntry1Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWepKeyEntry1Wl2g  

gWepKeyIndex1Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.1.1.1
Wep key index of guest network 1 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue1Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.1.1.2
WEP key value of guest network 1 for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWl2gSSID2WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.1.2.2
Wep key table of guest network 2 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWepKeyEntry2Wl2g

gWepKeyEntry2Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWepKeyEntry2Wl2g  

gWepKeyIndex2Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.2.1.1
Wep key index of guest network 2 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue2Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.2.1.2
WEP key value of guest network 2 for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWl2gSSID3WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.1.2.3
Wep key table of guest network 3 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWepKeyEntry3Wl2g

gWepKeyEntry3Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWepKeyEntry3Wl2g  

gWepKeyIndex3Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.3.1.1
Wep key index of guest network 3 for 2G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue3Wl2g 1.3.6.1.4.1.2623.4.1.1.9.1.2.3.1.2
WEP key value of guest network 3 for 2G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

guest-network-wl5g 1.3.6.1.4.1.2623.4.1.1.9.2
OBJECT IDENTIFIER    

wl5gGuestNetworkTable 1.3.6.1.4.1.2623.4.1.1.9.2.1
Guest network list for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    Wl5gGuestNetworkEntry

wl5gGuestNetworkEntry 1.3.6.1.4.1.2623.4.1.1.9.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  Wl5gGuestNetworkEntry  

gIndexWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.1
Guest Network List Index for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..3  

gEnableWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.2
The enable of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gSSIDWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.3
The SSID of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

gAuthenticationWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.4
The authentication method of guest network list of 5G. Open system with wep key, shared key, and radius with 802.1x are only supported when wireless mode is legacy.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER opensystem(1), sharedkey(2), wpa-personal(3), wpa2-personal(4), wpa-auto-personal(5), wpa-enterprise(6), wpa2-enterprise(7), wpa-auto-enterprise(8), radius-with-8021x(9)  

gWepEncryptionWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.5
The wep encryption of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep-64bits(2), wep-128bits(3)  

gKeyIndexWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.6
The key index of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

gPassphraseWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.7
The passphrase of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWpaEncryptionWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.8
The WPA encryption of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

gWpaPreSharedKeyWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.9
The WPA pre-shared key of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gAccessTimeWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.10
The access time of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER specific-time(1), limitless(2)  

gAccessTimeHWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.11
The access time (hour) of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..23  

gAccessTimeMWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.12
The access time (minute) of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..59  

gAccessIntranetWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.13
The access intranet of guest network list for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

gEnableMacFilterWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.1.1.14
Enable MAC filter of guest network of 5G. Note: MAC filter function of primary SSID must be enabled first.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

gSSIDWepKeyWl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2
OBJECT IDENTIFIER    

gWl5gSSID1WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.2.2.1
Wep key table of guest network 1 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWepKeyEntry1Wl5g

gWepKeyEntry1Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWepKeyEntry1Wl5g  

gWepKeyIndex1Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.1.1.1
Wep key index of guest network 1 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue1Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.1.1.2
WEP key value of guest network 1 for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWl5gSSID2WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.2.2.2
Wep key table of guest network 2 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWl5gSSID2WepKeyEntry

gWl5gSSID2WepKeyEntry 1.3.6.1.4.1.2623.4.1.1.9.2.2.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWl5gSSID2WepKeyEntry  

gWepKeyIndex2Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.2.1.1
Wep key index of guest network 2 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue2Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.2.1.2
WEP key value of guest network 2 for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

gWl5gSSID3WepKeyTable 1.3.6.1.4.1.2623.4.1.1.9.2.2.3
Wep key table of guest network 3 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GWepKeyEntry3Wl5g

gWl5gSSID3WepKeyEntry 1.3.6.1.4.1.2623.4.1.1.9.2.2.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  GWepKeyEntry3Wl5g  

gWepKeyIndex3Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.3.1.1
Wep key index of guest network 3 for 5G.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..4  

gWepKeyValue3Wl5g 1.3.6.1.4.1.2623.4.1.1.9.2.2.3.1.2
WEP key value of guest network 3 for 5G.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

automatic-mode 1.3.6.1.4.1.2623.4.1.1.10.1
OBJECT IDENTIFIER    

enableQoS 1.3.6.1.4.1.2623.4.1.1.10.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

uploadBandwidth 1.3.6.1.4.1.2623.4.1.1.10.1.2
If the measured uplink speed is incorrect, you can assign it manually here.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

downloadBandwidth 1.3.6.1.4.1.2623.4.1.1.10.1.3
If the measured downlink speed is incorrect, you can assign it manually here.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER  

user-defined-qos-rules 1.3.6.1.4.1.2623.4.1.1.10.2
OBJECT IDENTIFIER    

userSpecifyRuleTable 1.3.6.1.4.1.2623.4.1.1.10.2.1
User specify rule list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    UserSpecifyRuleEntry

userSpecifyRuleEntry 1.3.6.1.4.1.2623.4.1.1.10.2.1.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  UserSpecifyRuleEntry  

userSpecifyRuleIndex 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.1
User Specify Rule Index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

userSpecifyRuleServiceName 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.2
Service name of user specify rule list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

userSpecifyRuleSrcIPorMAC 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.3
For source or destination IP address, you can : (a) enter a specific IP address, such as '192.168.122.1'; (b) enter IP addresses within one subnet or within the same IP pool, such as '192.168.123.*', or '192.168.*.*'; or (c) enter all IP addresses as '*.*.*.*\'.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

userSpecifyRuleDestPort 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.4
Destination port of user specify rule list.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

userSpecifyRuleProtocol 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.5
Protocol of user specify rule list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tcp(1), udp(2), tcp-or-udp(3), any(4)  

userSpecifyRuleMinTransferred 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.6
Set the network traffic limit (in KB) for a specific service to generate specific priorities for the service assigned to a specific port. For example, if two network clients, PC 1 and PC 2, are both accessing the Internet (set at port 80), but PC 1 exceeded the network traffic limit due to some downloading tasks, PC 1 will be given a lower priority. The Transferred column refers to the upstream and downstream traffic (outgoing and incoming network traffic) for one session. If you do not want to set the traffic limit, you can leave it blank.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

userSpecifyRuleMaxTransferred 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.7
Set the network traffic limit (in KB) for a specific service to generate specific priorities for the service assigned to a specific port. For example, if two network clients, PC 1 and PC 2, are both accessing the Internet (set at port 80), but PC 1 exceeded the network traffic limit due to some downloading tasks, PC 1 will be given a lower priority. The Transferred column refers to the upstream and downstream traffic (outgoing and incoming network traffic) for one session. If you do not want to set the traffic limit, you can leave it blank.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

userSpecifyRulePriority 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.8
Priority of user specify rule list.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER highest(1), high(2), medium(3), low(4), lowest(5)  

userSpecifyRuleDelEntry 1.3.6.1.4.1.2623.4.1.1.10.2.1.1.9
Delete the user specify rule enntry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

user-defined-priority 1.3.6.1.4.1.2623.4.1.1.10.3
OBJECT IDENTIFIER    

upload-bandwidth 1.3.6.1.4.1.2623.4.1.1.10.3.1
OBJECT IDENTIFIER    

upHighestMinReserveBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.1
Minimum reserved bandwidth of highest upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upHighestMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.2
Maximum bandwidth limit of highest upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upHighMinReserveBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.3
Minimum reserved bandwidth of high upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upHighMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.4
Maximum bandwidth limit of high upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upMediumMinReserveBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.5
Minimum reserved bandwidth of medium upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upMediumMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.6
Maximum bandwidth limit of medium upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upLowMinReserveBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.7
Minimum reserved bandwidth of low upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upLowMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.8
Maximum bandwidth limit of low upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upLowestMinReserveBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.9
Minimum reserved bandwidth of lowest upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

upLowestMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.1.10
Maximum bandwidth limit of lowest upload priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

download-bandwidth 1.3.6.1.4.1.2623.4.1.1.10.3.2
OBJECT IDENTIFIER    

downHighestMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.2.1
Maximum bandwidth limit of highest download priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

downHighMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.2.2
Maximum bandwidth limit of high download priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

downMediumMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.2.3
Maximum bandwidth limit of medium download priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

downLowMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.2.4
Maximum bandwidth limit of low download priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

downLowestMaxBd 1.3.6.1.4.1.2623.4.1.1.10.3.2.5
Maximum bandwidth limit of lowest download priority.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..100  

highestPriorityPacket 1.3.6.1.4.1.2623.4.1.1.10.3.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  BITS ack(0), syn(1), fin(2), rst(3), icmp(4)  

pControlEnable 1.3.6.1.4.1.2623.4.1.1.11.1
Enable parental control.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER on(1), off(2)  

pControlScanClients 1.3.6.1.4.1.2623.4.1.1.11.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

pControlScanTable 1.3.6.1.4.1.2623.4.1.1.11.3
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PControlScanEntry

pControlScanEntry 1.3.6.1.4.1.2623.4.1.1.11.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PControlScanEntry  

pControlScanIndex 1.3.6.1.4.1.2623.4.1.1.11.3.1.1
Client entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

pControlScanIPAddr 1.3.6.1.4.1.2623.4.1.1.11.3.1.2
MAC address of the client.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

pControlScanClientName 1.3.6.1.4.1.2623.4.1.1.11.3.1.3
Name of the client.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

pControlScanClientMac 1.3.6.1.4.1.2623.4.1.1.11.3.1.4
MAC address of the client.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

pControlClientTable 1.3.6.1.4.1.2623.4.1.1.11.4
Parental control client list.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    PControlClientEntry

pControlClientEntry 1.3.6.1.4.1.2623.4.1.1.11.4.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  PControlClientEntry  

pControlClientIndex 1.3.6.1.4.1.2623.4.1.1.11.4.1.1
Parental control client list index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..16  

pControlEntryEnable 1.3.6.1.4.1.2623.4.1.1.11.4.1.2
Enable the entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(0)  

pControlClientName 1.3.6.1.4.1.2623.4.1.1.11.4.1.3
Name of parental control client.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlClientMac 1.3.6.1.4.1.2623.4.1.1.11.4.1.4
Mac address of parental control client.
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

pControlSunAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.5
Time on Sunday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlMonAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.6
Time on Monday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlTueAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.7
Time on Tuesday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlWedAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.8
Time on Wednesday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlThuAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.9
Time on Thursday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlFriAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.10
Time on Friday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlSatAllowTime 1.3.6.1.4.1.2623.4.1.1.11.4.1.11
Time on Saturday at which clients are allowed to access internet. String format: If client can access internet from 1 o'clock to 3 o'clock, from 14 o'clock to 15 o'clock, and form 19 o'clock to 23 o'clock, please set '00-03,14-15,19-23'. '00-24' means all day.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

pControlClientDelEntry 1.3.6.1.4.1.2623.4.1.1.11.4.1.12
Delete the entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qRouterMode 1.3.6.1.4.1.2623.4.1.1.12.1
OBJECT IDENTIFIER    

qRInternetSetup 1.3.6.1.4.1.2623.4.1.1.12.1.1
OBJECT IDENTIFIER    

qRConnectionType 1.3.6.1.4.1.2623.4.1.1.12.1.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER automatic-ip(1), pppoe(2), static-ip(3), pptp(4), l2tp(5)  

qRAutomaticIP 1.3.6.1.4.1.2623.4.1.1.12.1.1.2
OBJECT IDENTIFIER    

qRAHostName 1.3.6.1.4.1.2623.4.1.1.12.1.1.2.1
This field allows you to provide a host name for RT-AC68U. It is usually requested by your ISP.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

qRAMacAddress 1.3.6.1.4.1.2623.4.1.1.12.1.1.2.2
MAC (Media Access Control) address is a unique identifier that identifies your computer or device in the network. ISPs monitor the MAC addresses of devices that connect to their services, and would disallow Internet connection for new MAC addresses. To fix this issue, you can do either of the following: *Contact your ISP and request to update the MAC address associated with your ISP subscription. *Clone or change the MAC address of the new device to match the MAC address of the original device. (This is optional.)
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

qRAConnectToDnsServerAutomatically 1.3.6.1.4.1.2623.4.1.1.12.1.1.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qRADnsServer1 1.3.6.1.4.1.2623.4.1.1.12.1.1.2.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRADnsServer2 1.3.6.1.4.1.2623.4.1.1.12.1.1.2.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRPPPoE 1.3.6.1.4.1.2623.4.1.1.12.1.1.3
OBJECT IDENTIFIER    

qRPPPoEUserName 1.3.6.1.4.1.2623.4.1.1.12.1.1.3.1
If you subscribe to PPPoE, PPTP or L2TP connection type, your ISP would give you a card or document that contains the account name and password on it. The account name and password that your ISP provided are used to connect to the Internet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

qRPPPoEPassword 1.3.6.1.4.1.2623.4.1.1.12.1.1.3.2
If you subscribe to PPPoE, PPTP or L2TP connection type, your ISP would give you a card or document that contains the account name and password on it. The account name and password that your ISP provided are used to connect to the Internet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

qRStaticIP 1.3.6.1.4.1.2623.4.1.1.12.1.1.4
OBJECT IDENTIFIER    

qRIPAddress 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.1
If your WAN connection requires a static IP address, key in the IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRSubnetMask 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.2
If your WAN connection requires a static IP address, key in the subnet mask in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRDefaultGateway 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.3
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRDnsServer1 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRDnsServer2 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRMacAddress 1.3.6.1.4.1.2623.4.1.1.12.1.1.4.6
MAC (Media Access Control) address is a unique identifier that identifies your computer or device in the network. ISPs monitor the MAC addresses of devices that connect to their services, and would disallow Internet connection for new MAC addresses. To fix this issue, you can do either of the following: *Contact your ISP and request to update the MAC address associated with your ISP subscription. *Clone or change the MAC address of the new device to match the MAC address of the original device. (This is optional.)
Status: current Access: read-write
OBJECT-TYPE    
  MacAddress  

qRPPTPL2TP 1.3.6.1.4.1.2623.4.1.1.12.1.1.5
OBJECT IDENTIFIER    

qRUserName 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.1
If you subscribe to PPPoE, PPTP or L2TP connection type, your ISP would give you a card or document that contains the account name and password on it. The account name and password that your ISP provided are used to connect to the Internet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

qRPassword 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.2
If you subscribe to PPPoE, PPTP or L2TP connection type, your ISP would give you a card or document that contains the account name and password on it. The account name and password that your ISP provided are used to connect to the Internet.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..64)  

qRPIPAddress 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.3
If your WAN connection requires a static IP address, key in the IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRPSubnetMask 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.4
If your WAN connection requires a static IP address, key in the subnet mask in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRPDefaultGateway 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.5
If your WAN connection requires a static IP address, key in the gateway IP address in this field.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qRPConnectToDnsServerAutomatically 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qRPDnsServer1 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRPDnsServer2 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qRPvpnServer 1.3.6.1.4.1.2623.4.1.1.12.1.1.5.9
If your WAN connection type is PPTP or L2TP, Please enter the server name or server ip of the VPN server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..256)  

qRSpecialRequirementFromISP 1.3.6.1.4.1.2623.4.1.1.12.1.1.6
OBJECT IDENTIFIER    

qRSelectISPProfile 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), unifi-home(2), unifi-business(3), singtel-mio(4), singtel-others(5), m1-fiber(6), maxis-fiber(7), maxis-fiber-special(8), manual(9)  

qRIptvSTBPort 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.2
Show the IPTV STB Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qRVoipPort 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.3
Show the VoIP Port.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qRInternetVID 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.4
User can set this variable only when 'selectISPProfile' is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRInternetPRIO 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.5
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

qRLan4PortVID 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.6
User can set this variable only when 'selectISPProfil'e is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRLan4PortPRIO 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.7
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

qRLan3PortVID 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.8
User can set this variable only when 'selectISPProfile' is 'manual'. Blank value means internetVID won't be used. Value Range: 2-4094.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRLan3PortPRIO 1.3.6.1.4.1.2623.4.1.1.12.1.1.6.9
User can set this variable only when 'selectISPProfile' is 'manual'.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..7  

qRWirelessSetting 1.3.6.1.4.1.2623.4.1.1.12.1.2
OBJECT IDENTIFIER    

qRnetworkNameWl2g 1.3.6.1.4.1.2623.4.1.1.12.1.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRnetworkKeyWl2g 1.3.6.1.4.1.2623.4.1.1.12.1.2.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRnetworkNameWl5g 1.3.6.1.4.1.2623.4.1.1.12.1.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRnetworkKeyWl5g 1.3.6.1.4.1.2623.4.1.1.12.1.2.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qRepeaterMode 1.3.6.1.4.1.2623.4.1.1.12.2
OBJECT IDENTIFIER    

qAPScanAct 1.3.6.1.4.1.2623.4.1.1.12.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

qAPScanTable 1.3.6.1.4.1.2623.4.1.1.12.2.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QAPScanEntry

qAPScanEntry 1.3.6.1.4.1.2623.4.1.1.12.2.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  QAPScanEntry  

qAPResultIndex 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.1
AP scan result entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

qAPResultBand 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.2
Band of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qAPResultSSID 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.3
SSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

qAPResultChannel 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.4
Channel of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qAPResultAuthentication 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.5
Authentication of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER open-system(1), wpa-enterprise(2), wpa2-enterprise(3), wpa-personl(4), wpa2-personl(5), none(6), radius-with-8021x(7), unknown(8)  

qAPResultEncryption 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.6
Encryption of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), wep(2), tkip(3), aes(4), tkip-aes(5), unknown(6)  

qAPResultRssi 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.7
Rssi of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qAPResultBSSID 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.8
BSSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qAPResultMode 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.9
Mode of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), an(3), bg(4), bgn(5)  

qAPResultStatus 1.3.6.1.4.1.2623.4.1.1.12.2.2.1.10
Status of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qWlcBand 1.3.6.1.4.1.2623.4.1.1.12.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER band2g(1), band5g(2)  

qWlcSsid 1.3.6.1.4.1.2623.4.1.1.12.2.4
The network name that RT-AC68U will connect to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

qWlcAuthentication 1.3.6.1.4.1.2623.4.1.1.12.2.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER open-system(1), shared-key(2), wpa-personal(3), wpa2-personal(4), wpa-enterprise(5), wpa2-enterprise(6), radius-with-8021x(7)  

qWlcWepEncryption 1.3.6.1.4.1.2623.4.1.1.12.2.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep-64bits(2), wep-128bits(3)  

qWlcKeyIndex 1.3.6.1.4.1.2623.4.1.1.12.2.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

qWlcWepKeyValue 1.3.6.1.4.1.2623.4.1.1.12.2.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qWlcWpaEncryption 1.3.6.1.4.1.2623.4.1.1.12.2.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

qWlcWpaPreSharedKey 1.3.6.1.4.1.2623.4.1.1.12.2.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qTWirelessSetting 1.3.6.1.4.1.2623.4.1.1.12.2.11
OBJECT IDENTIFIER    

qTUseDefaultSettings 1.3.6.1.4.1.2623.4.1.1.12.2.11.1
Select 'yes' to use the same settings as the network you want to extend.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), nothing(2)  

qTnetworkNameWl2g 1.3.6.1.4.1.2623.4.1.1.12.2.11.2
The Network name of RT-AC68U 2.4G band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qTnetworkKeyWl2g 1.3.6.1.4.1.2623.4.1.1.12.2.11.3
The Network key of RT-AC68U 2.4G band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qTnetworkNameWl5g 1.3.6.1.4.1.2623.4.1.1.12.2.11.4
The Network key of RT-AC68U 5G band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qTnetworkKeyWl5g 1.3.6.1.4.1.2623.4.1.1.12.2.11.5
The Network key of RT-AC68U 5G band.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qApMode 1.3.6.1.4.1.2623.4.1.1.12.3
OBJECT IDENTIFIER    

qlanIpSetting 1.3.6.1.4.1.2623.4.1.1.12.3.1
OBJECT IDENTIFIER    

qlanGetIpAutomatically 1.3.6.1.4.1.2623.4.1.1.12.3.1.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qlanIPAddress 1.3.6.1.4.1.2623.4.1.1.12.3.1.2
The value of this object is IP Address of the device which is seen on your local network. The default value is 192.168.1.1.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qlanSubnetMask 1.3.6.1.4.1.2623.4.1.1.12.3.1.3
The value this object is Subnet Mask of the device which is seen on your local network. The default value is 255.255.255.0.
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qlanDefaultGateway 1.3.6.1.4.1.2623.4.1.1.12.3.1.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

qlanConnectToDnsServerAutomatically 1.3.6.1.4.1.2623.4.1.1.12.3.1.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER yes(1), no(2)  

qlanDnsServer1 1.3.6.1.4.1.2623.4.1.1.12.3.1.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qlanDnsServer2 1.3.6.1.4.1.2623.4.1.1.12.3.1.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..15)  

qPWirelessSetting 1.3.6.1.4.1.2623.4.1.1.12.3.2
OBJECT IDENTIFIER    

qPnetworkNameWl2g 1.3.6.1.4.1.2623.4.1.1.12.3.2.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qPnetworkKeyWl2g 1.3.6.1.4.1.2623.4.1.1.12.3.2.2
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qPnetworkNameWl5g 1.3.6.1.4.1.2623.4.1.1.12.3.2.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qPnetworkKeyWl5g 1.3.6.1.4.1.2623.4.1.1.12.3.2.4
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qMediaBridgeMode 1.3.6.1.4.1.2623.4.1.1.12.4
OBJECT IDENTIFIER    

qmAPScanAct 1.3.6.1.4.1.2623.4.1.1.12.4.1
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER scan(1), nothing(2)  

qmAPScanTable 1.3.6.1.4.1.2623.4.1.1.12.4.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    QmAPScanEntry

qmAPScanEntry 1.3.6.1.4.1.2623.4.1.1.12.4.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  QmAPScanEntry  

qmAPResultIndex 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.1
AP scan result entry index.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 1..32  

qmAPResultBand 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.2
Band of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qmAPResultSSID 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.3
SSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

qmAPResultChannel 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.4
Channel of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qmAPResultAuthentication 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.5
Authentication of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER open-system(1), wpa-enterprise(2), wpa2-enterprise(3), wpa-personl(4), wpa2-personl(5), none(6), radius-with-8021x(7), unknown(8)  

qmAPResultEncryption 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.6
Encryption of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER none(1), wep(2), tkip(3), aes(4), tkip-aes(5), unknown(6)  

qmAPResultRssi 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.7
Rssi of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qmAPResultBSSID 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.8
BSSID of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

qmAPResultMode 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.9
Mode of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER a(1), b(2), an(3), bg(4), bgn(5)  

qmAPResultStatus 1.3.6.1.4.1.2623.4.1.1.12.4.2.1.10
Status of the AP scan result.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

qmWlcBand 1.3.6.1.4.1.2623.4.1.1.12.4.3
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER band2g(1), band5g(2)  

qmWlcSsid 1.3.6.1.4.1.2623.4.1.1.12.4.4
The network name that RT-AC68U will connect to.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

qmWlcAuthentication 1.3.6.1.4.1.2623.4.1.1.12.4.5
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER open-system(1), shared-key(2), wpa-personal(3), wpa2-personal(4), wpa-enterprise(5), wpa2-enterprise(6), radius-with-8021x(7)  

qmWlcWepEncryption 1.3.6.1.4.1.2623.4.1.1.12.4.6
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), wep-64bits(2), wep-128bits(3)  

qmWlcKeyIndex 1.3.6.1.4.1.2623.4.1.1.12.4.7
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER first(1), second(2), third(3), forth(4)  

qmWlcWepKeyValue 1.3.6.1.4.1.2623.4.1.1.12.4.8
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

qmWlcWpaEncryption 1.3.6.1.4.1.2623.4.1.1.12.4.9
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER tkip(1), aes(2), tkip-aes(3), none(0)  

qmWlcWpaPreSharedKey 1.3.6.1.4.1.2623.4.1.1.12.4.10
Tok_String
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor