ROUTING6-MIB

File: ROUTING6-MIB.mib (114965 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
IPV6-TC OSPFV3-MIB OSPF-MIB
QUANTA-SWITCH-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
mib-2 Counter32 Unsigned32
Integer32 IpAddress Gauge32
DisplayString PhysAddress TruthValue
TimeStamp TEXTUAL-CONVENTION VariablePointer
RowPointer RowStatus MacAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
Ipv6IfIndex Ipv6Address Ipv6AddressPrefix
Ipv6AddressIfIdentifier Ipv6IfIndexOrZero ospfv3IfEntry
ospfv3VirtIfEntry ospfv3AreaEntry RouterID
AreaID switch

Defined Types

SpfTimerRange  
The range of intervals on which Spf timers can be configured.
TEXTUAL-CONVENTION    
  Integer32 0..65535  

AutoCostRefBw  
The value of reference bandwidth from which ospf calculates metric cost.
TEXTUAL-CONVENTION    
  Unsigned32 1..4294967  

AgentIpv6InterfaceEntry  
SEQUENCE    
  agentIpv6InterfaceIfIndex Integer32
  agentIpv6InterfaceMtuValue Unsigned32
  agentIpv6InterfaceDadTransmits Integer32
  agentIpv6InterfaceLinkLocalOnly INTEGER
  agentIpv6InterfaceIcmpUnreachables INTEGER
  agentIpv6InterfaceAutoconfig INTEGER
  agentIpv6InterfaceDhcpClient INTEGER

AgentIpv6RouterAdvertisementEntry  
SEQUENCE    
  agentIpv6RouterAdvertisementIfIndex Integer32
  agentIpv6RouterAdvertisementSuppressMode INTEGER
  agentIpv6RouterAdvertisementMaxAdvertisementInterval Integer32
  agentIpv6RouterAdvertisementMinAdvertisementInterval Integer32
  agentIpv6RouterAdvertisementAdvertisementLifetime Integer32
  agentIpv6RouterAdvertisementNbrSolicitInterval Unsigned32
  agentIpv6RouterAdvertisementReachableTime Integer32
  agentIpv6RouterAdvertisementManagedFlag INTEGER
  agentIpv6RouterAdvertisementOtherFlag INTEGER

AgentIpv6AddrPrefixEntry  
SEQUENCE    
  agentIpv6AddrPrefix Ipv6AddressPrefix
  agentIpv6AddrPrefixLength INTEGER
  agentIpv6AddrPrefixOnLinkFlag TruthValue
  agentIpv6AddrPrefixAutonomousFlag TruthValue
  agentIpv6AddrPrefixAdvPreferredLifetime Unsigned32
  agentIpv6AddrPrefixAdvValidLifetime Unsigned32

AgentIpv6AddrEntry  
SEQUENCE    
  agentIpv6AddrAddress Ipv6Address
  agentIpv6AddrPfxLength INTEGER
  agentIpv6AddrEui64Flag TruthValue
  agentIpv6AddrStatus RowStatus

AgentIpv6StaticRouteEntry  
SEQUENCE    
  agentIpv6StaticRouteDest Ipv6AddressPrefix
  agentIpv6StaticRoutePfxLength INTEGER
  agentIpv6StaticRouteIfIndex Ipv6IfIndexOrZero
  agentIpv6StaticRouteNextHop Ipv6Address
  agentIpv6StaticRoutePreference INTEGER
  agentIpv6StaticRouteStatus RowStatus

AgentIpv6ServicePortPrefixEntry  
SEQUENCE    
  agentIpv6ServicePortPrefixIndex Unsigned32
  agentIpv6ServicePortPrefix Ipv6Address
  agentIpv6ServicePortPrefixLength Unsigned32

AgentIpv6ServicePortDefaultRouterEntry  
SEQUENCE    
  agentIpv6ServicePortDefaultRouterIndex Unsigned32
  agentIpv6ServicePortDefaultRouter Ipv6Address

AgentIpv6ServicePortNbrEntry  
SEQUENCE    
  agentIpv6ServicePortNbrAddr Ipv6Address
  agentIpv6ServicePortNbrPhysAddr MacAddress
  agentIpv6ServicePortNbrState INTEGER
  agentIpv6ServicePortNbrUpdated TimeStamp
  agentIpv6ServicePortNbrIsRouter TruthValue

AgentIpv6NeighborEntry  
SEQUENCE    
  agentIpv6NeighborIfIndex Ipv6IfIndex
  agentIpv6NeighborAddress Ipv6Address
  agentIpv6NeighborMacAddress PhysAddress
  agentIpv6NeighborIsRouter TruthValue
  agentIpv6NeighborState INTEGER
  agentIpv6NeighborLastUpdated TimeStamp

AgentIpv6StaticNeighborEntry  
SEQUENCE    
  agentIpv6StaticNeighborIfIndex Ipv6IfIndex
  agentIpv6StaticNeighborAddress Ipv6Address
  agentIpv6StaticNeighborMacAddress PhysAddress

AgentRipngRouteRedistEntry  
SEQUENCE    
  agentRipngRouteRedistSource INTEGER
  agentRipngRouteRedistMode INTEGER
  agentRipngRouteRedistMetric Integer32
  agentRipngRouteRedistMetricConfigured TruthValue

AgentRipngIfEntry  
SEQUENCE    
  agentRipngIfIndex Integer32
  agentRipngIfAdminMode INTEGER
  agentRipngIfPassiveMode INTEGER

AgentOspfv3RouteRedistEntry  
SEQUENCE    
  agentOspfv3RouteRedistSource INTEGER
  agentOspfv3RouteRedistMode INTEGER
  agentOspfv3RouteRedistMetric Integer32
  agentOspfv3RouteRedistMetricConfigured TruthValue
  agentOspfv3RouteRedistMetricType INTEGER
  agentOspfv3RouteRedistTag Unsigned32

AgentOspfv3IfEntry  
SEQUENCE    
  agentOspfv3IfIpMtuIgnoreFlag INTEGER
  agentOspfv3IfPassiveMode TruthValue

AgentOspfv3LsdbEntry  
SEQUENCE    
  agentOspfv3LsdbAreaId AreaID
  agentOspfv3LsdbType INTEGER
  agentOspfv3LsdbLsid IpAddress
  agentOspfv3LsdbRouterId RouterID
  agentOspfv3LsdbSequence Unsigned32
  agentOspfv3LsdbAge Integer32
  agentOspfv3LsdbChecksum Unsigned32
  agentOspfv3LsdbAdvertisement DisplayString

AgentOspfv3AsLsdbEntry  
SEQUENCE    
  agentOspfv3AsLsdbType INTEGER
  agentOspfv3AsLsdbLsid IpAddress
  agentOspfv3AsLsdbRouterId RouterID
  agentOspfv3AsLsdbSequence Unsigned32
  agentOspfv3AsLsdbAge Integer32
  agentOspfv3AsLsdbChecksum Integer32
  agentOspfv3AsLsdbAdvertisement OCTET STRING

AgentDhcp6ClientParametersEntry  
SEQUENCE    
  agentDhcp6ClientInterfaceIndex Unsigned32
  agentDhcp6ClientPrefix Ipv6AddressPrefix
  agentDhcp6ClientPrefixlength INTEGER
  agentDhcp6ClientState INTEGER
  agentDhcp6ClientServerDUID DisplayString
  agentDhcp6ClientT1Time Unsigned32
  agentDhcp6ClientT2Time Unsigned32
  agentDhcp6ClientIAID Unsigned32
  agentDhcp6ClientPreferredLifeTime Unsigned32
  agentDhcp6ClientValidLifeTime Unsigned32
  agentDhcp6ClientRenewTime Unsigned32
  agentDhcp6ClientExpireTime Unsigned32

Defined Values

routingIpv6 1.3.6.1.4.1.7244.2.30
The Quanta Private MIB for FastPath Ipv6 Routing
MODULE-IDENTITY    

agentIpv6Group 1.3.6.1.4.1.7244.2.30.1
OBJECT IDENTIFIER    

agentIpv6RoutingMode 1.3.6.1.4.1.7244.2.30.1.1
Administratively enables/disables ipv6 unicast routing on the switch.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6InterfaceTable 1.3.6.1.4.1.7244.2.30.1.2
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6InterfaceEntry

agentIpv6InterfaceEntry 1.3.6.1.4.1.7244.2.30.1.2.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6InterfaceEntry  

agentIpv6InterfaceIfIndex 1.3.6.1.4.1.7244.2.30.1.2.1.1
The IfIndex associated with this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentIpv6InterfaceMtuValue 1.3.6.1.4.1.7244.2.30.1.2.1.2
Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 0 | 1280..1500  

agentIpv6InterfaceDadTransmits 1.3.6.1.4.1.7244.2.30.1.2.1.3
Configures the dad transmits value for this interface.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..600  

agentIpv6InterfaceLinkLocalOnly 1.3.6.1.4.1.7244.2.30.1.2.1.4
When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6InterfaceIcmpUnreachables 1.3.6.1.4.1.7244.2.30.1.2.1.5
If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6InterfaceAutoconfig 1.3.6.1.4.1.7244.2.30.1.2.1.6
If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6InterfaceDhcpClient 1.3.6.1.4.1.7244.2.30.1.2.1.7
If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6RouterAdvertisementTable 1.3.6.1.4.1.7244.2.30.1.3
There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6RouterAdvertisementEntry

agentIpv6RouterAdvertisementEntry 1.3.6.1.4.1.7244.2.30.1.3.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6RouterAdvertisementEntry  

agentIpv6RouterAdvertisementIfIndex 1.3.6.1.4.1.7244.2.30.1.3.1.1
Interface Number to configure Router Advertisement on.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentIpv6RouterAdvertisementSuppressMode 1.3.6.1.4.1.7244.2.30.1.3.1.2
Enable or disable router advertisement suppression on the interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6RouterAdvertisementMaxAdvertisementInterval 1.3.6.1.4.1.7244.2.30.1.3.1.3
Maximum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 4..1800  

agentIpv6RouterAdvertisementMinAdvertisementInterval 1.3.6.1.4.1.7244.2.30.1.3.1.4
Mimimum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 3..1350  

agentIpv6RouterAdvertisementAdvertisementLifetime 1.3.6.1.4.1.7244.2.30.1.3.1.5
Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..9000  

agentIpv6RouterAdvertisementNbrSolicitInterval 1.3.6.1.4.1.7244.2.30.1.3.1.6
Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. The valid value range is 1000..4294967295
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentIpv6RouterAdvertisementReachableTime 1.3.6.1.4.1.7244.2.30.1.3.1.7
Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..3600000  

agentIpv6RouterAdvertisementManagedFlag 1.3.6.1.4.1.7244.2.30.1.3.1.8
Value of managed config field of router advertisement sent from the interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6RouterAdvertisementOtherFlag 1.3.6.1.4.1.7244.2.30.1.3.1.9
Value of other config field of router advertisement sent from the interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentIpv6AddrPrefixTable 1.3.6.1.4.1.7244.2.30.1.4
The list of IPv6 address prefixes of IPv6 interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6AddrPrefixEntry

agentIpv6AddrPrefixEntry 1.3.6.1.4.1.7244.2.30.1.4.1
An interface entry containing objects of a particular IPv6 address prefix.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6AddrPrefixEntry  

agentIpv6AddrPrefix 1.3.6.1.4.1.7244.2.30.1.4.1.1
The prefix associated with the this interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6AddressPrefix  

agentIpv6AddrPrefixLength 1.3.6.1.4.1.7244.2.30.1.4.1.2
The length of the prefix (in bits).
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..128  

agentIpv6AddrPrefixOnLinkFlag 1.3.6.1.4.1.7244.2.30.1.4.1.3
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentIpv6AddrPrefixAutonomousFlag 1.3.6.1.4.1.7244.2.30.1.4.1.4
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentIpv6AddrPrefixAdvPreferredLifetime 1.3.6.1.4.1.7244.2.30.1.4.1.5
It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentIpv6AddrPrefixAdvValidLifetime 1.3.6.1.4.1.7244.2.30.1.4.1.6
It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentIpv6AddrTable 1.3.6.1.4.1.7244.2.30.1.5
The table of addressing information relevant to this node's interface addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6AddrEntry

agentIpv6AddrEntry 1.3.6.1.4.1.7244.2.30.1.5.1
The addressing information for one of this node's interface addresses.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6AddrEntry  

agentIpv6AddrAddress 1.3.6.1.4.1.7244.2.30.1.5.1.1
The IPv6 address to which this entry's addressing information pertains.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

agentIpv6AddrPfxLength 1.3.6.1.4.1.7244.2.30.1.5.1.2
The length of the prefix (in bits) associated with the IPv6 address of this entry.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..128  

agentIpv6AddrEui64Flag 1.3.6.1.4.1.7244.2.30.1.5.1.3
This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
Status: current Access: read-create
OBJECT-TYPE    
  TruthValue  

agentIpv6AddrStatus 1.3.6.1.4.1.7244.2.30.1.5.1.4
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentIpv6StaticRouteTable 1.3.6.1.4.1.7244.2.30.1.6
IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6StaticRouteEntry

agentIpv6StaticRouteEntry 1.3.6.1.4.1.7244.2.30.1.6.1
A routing entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6StaticRouteEntry  

agentIpv6StaticRouteDest 1.3.6.1.4.1.7244.2.30.1.6.1.1
The destination IPv6 address of this route. This object may not take a Multicast address value.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6AddressPrefix  

agentIpv6StaticRoutePfxLength 1.3.6.1.4.1.7244.2.30.1.6.1.2
Indicates the prefix length of the destination address.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER 0..128  

agentIpv6StaticRouteIfIndex 1.3.6.1.4.1.7244.2.30.1.6.1.3
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6IfIndexOrZero  

agentIpv6StaticRouteNextHop 1.3.6.1.4.1.7244.2.30.1.6.1.4
The address of the next system en route.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

agentIpv6StaticRoutePreference 1.3.6.1.4.1.7244.2.30.1.6.1.5
The routing preference metric for this route. A lower value is more preferred.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 1..255  

agentIpv6StaticRouteStatus 1.3.6.1.4.1.7244.2.30.1.6.1.6
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

agentIpv6ServicePortGroup 1.3.6.1.4.1.7244.2.30.1.7
OBJECT IDENTIFIER    

agentIpv6ServicePortPrefixTable 1.3.6.1.4.1.7244.2.30.1.7.1
IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6ServicePortPrefixEntry

agentIpv6ServicePortPrefixEntry 1.3.6.1.4.1.7244.2.30.1.7.1.1
An IPv6 Service Port Prefix entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6ServicePortPrefixEntry  

agentIpv6ServicePortPrefixIndex 1.3.6.1.4.1.7244.2.30.1.7.1.1.1
The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

agentIpv6ServicePortPrefix 1.3.6.1.4.1.7244.2.30.1.7.1.1.2
The Ipv6 Prefix Address configured on the Service Port.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

agentIpv6ServicePortPrefixLength 1.3.6.1.4.1.7244.2.30.1.7.1.1.3
The length of the IPv6 Prefix Address.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentIpv6ServicePortDefaultRouterTable 1.3.6.1.4.1.7244.2.30.1.7.2
IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6ServicePortDefaultRouterEntry

agentIpv6ServicePortDefaultRouterEntry 1.3.6.1.4.1.7244.2.30.1.7.2.1
An IPv6 Service Port Default Router entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6ServicePortDefaultRouterEntry  

agentIpv6ServicePortDefaultRouterIndex 1.3.6.1.4.1.7244.2.30.1.7.2.1.1
The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32  

agentIpv6ServicePortDefaultRouter 1.3.6.1.4.1.7244.2.30.1.7.2.1.2
The Address of the IPv6 Default Router configured on the Service Port.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

agentIpv6ServicePortNbrTable 1.3.6.1.4.1.7244.2.30.1.7.3
IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6ServicePortNbrEntry

agentIpv6ServicePortNbrEntry 1.3.6.1.4.1.7244.2.30.1.7.3.1
An IPv6 Service Port Neighbor entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6ServicePortNbrEntry  

agentIpv6ServicePortNbrAddr 1.3.6.1.4.1.7244.2.30.1.7.3.1.1
The Ipv6 Address of a neighbor switch visible to the Service Port.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6Address  

agentIpv6ServicePortNbrPhysAddr 1.3.6.1.4.1.7244.2.30.1.7.3.1.2
The MacAddress of the neighboring switch.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

agentIpv6ServicePortNbrState 1.3.6.1.4.1.7244.2.30.1.7.3.1.3
The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reachable(1), stale(2), delay(3), probe(4), unknown(6)  

agentIpv6ServicePortNbrUpdated 1.3.6.1.4.1.7244.2.30.1.7.3.1.4
The last sysUpTime that this neighbor has been updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

agentIpv6ServicePortNbrIsRouter 1.3.6.1.4.1.7244.2.30.1.7.3.1.5
Returns true(1) if the neighbor machine is a router, false(2) otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentIpv6ServicePortConfigProtocol 1.3.6.1.4.1.7244.2.30.1.7.4
The switch's ServicePort IPv6 config protocol
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), dhcp6(2)  

agentIpv6ServicePortDhcpRestart 1.3.6.1.4.1.7244.2.30.1.7.5
The switch's ServicePort IPv6 DHCP Restart
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentIpv6NeighborGroup 1.3.6.1.4.1.7244.2.30.1.9
OBJECT IDENTIFIER    

agentIpv6NeighborTable 1.3.6.1.4.1.7244.2.30.1.9.1
IPv6 Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6NeighborEntry

agentIpv6NeighborEntry 1.3.6.1.4.1.7244.2.30.1.9.1.1
An IPv6 Neighbor entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6NeighborEntry  

agentIpv6NeighborIfIndex 1.3.6.1.4.1.7244.2.30.1.9.1.1.1
A unique non-zero value identifying the particular IPv6 interface.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6IfIndex  

agentIpv6NeighborAddress 1.3.6.1.4.1.7244.2.30.1.9.1.1.2
The Ipv6 Address of a neighbor switch visible
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

agentIpv6NeighborMacAddress 1.3.6.1.4.1.7244.2.30.1.9.1.1.3
The MacAddress of the neighboring switch.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentIpv6NeighborIsRouter 1.3.6.1.4.1.7244.2.30.1.9.1.1.4
Returns true(1) if the neighbor machine is a router, false(2) otherwise.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

agentIpv6NeighborState 1.3.6.1.4.1.7244.2.30.1.9.1.1.5
The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER reachable(1), stale(2), delay(3), probe(4), invalid(5), unknown(6)  

agentIpv6NeighborLastUpdated 1.3.6.1.4.1.7244.2.30.1.9.1.1.6
The last sysUpTime that this neighbor has been updated.
Status: current Access: read-only
OBJECT-TYPE    
  TimeStamp  

agentIpv6StaticNeighbor 1.3.6.1.4.1.7244.2.30.1.9.2
IPv6 static Neighbor Table. This table contains an entry for each valid IPv6 static Neighbor configured
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentIpv6StaticNeighborEntry

agentIpv6StaticNeighborEntry 1.3.6.1.4.1.7244.2.30.1.9.2.1
An IPv6 static Neighbor entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentIpv6StaticNeighborEntry  

agentIpv6StaticNeighborIfIndex 1.3.6.1.4.1.7244.2.30.1.9.2.1.1
A unique non-zero value identifying the particular IPv6 interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  Ipv6IfIndex  

agentIpv6StaticNeighborAddress 1.3.6.1.4.1.7244.2.30.1.9.2.1.2
The Ipv6 Address of a static neighbor switch visible
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6Address  

agentIpv6StaticNeighborMacAddress 1.3.6.1.4.1.7244.2.30.1.9.2.1.3
The MacAddress of the static neighboring switch.
Status: current Access: read-only
OBJECT-TYPE    
  PhysAddress  

agentIpv6StaticNeighborRowAddress 1.3.6.1.4.1.7244.2.30.1.9.3
The Ipv6 Address of a static neighbor switch visible
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..40)  

agentIpv6StaticNeighborRowMacAddress 1.3.6.1.4.1.7244.2.30.1.9.4
The MacAddress of the static neighboring switch.
Status: current Access: read-write
OBJECT-TYPE    
  PhysAddress  

agentIpv6StaticNeighborRowStatus 1.3.6.1.4.1.7244.2.30.1.9.5
Creates a new entry in the Neighbor table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated address from the interface.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

agentRouterRipngConfigGroup 1.3.6.1.4.1.7244.2.30.2
OBJECT IDENTIFIER    

agentRouterRipngAdminState 1.3.6.1.4.1.7244.2.30.2.1
Sets the administrative mode of RIPng in the router.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentRouterRipngSplitHorizonMode 1.3.6.1.4.1.7244.2.30.2.2
Sets the RIPng split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(1), simple(2), poisonReverse(3)  

agentRouterRipngDefaultMetric 1.3.6.1.4.1.7244.2.30.2.5
Default metric of redistributed routes, when RIPng redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

agentRouterRipngDefaultMetricConfigured 1.3.6.1.4.1.7244.2.30.2.6
Flag to determine whether RIPng default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentRouterRipngDefaultInfoOriginate 1.3.6.1.4.1.7244.2.30.2.7
Flag to determine, whether RIPng can advertise a default-route learned from another protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentRouterRipngDistance 1.3.6.1.4.1.7244.2.30.2.8
Configure the distance value for RIPng routes.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..255  

agentRouterRipngUpdateTime 1.3.6.1.4.1.7244.2.30.2.10
Configure the Ripng update time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..2147483647  

agentRouterRipngGarbageTime 1.3.6.1.4.1.7244.2.30.2.11
Configure the Ripng garbage time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..2147483647  

agentRouterRipngTimeoutTime 1.3.6.1.4.1.7244.2.30.2.12
Configure the Ripng timeout time.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 5..2147483647  

agentRipngRouteRedistTable 1.3.6.1.4.1.7244.2.30.2.9
This table contains the MIB objects required to configure route-redistribution for RIPng. Here, RIPng is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentRipngRouteRedistEntry

agentRipngRouteRedistEntry 1.3.6.1.4.1.7244.2.30.2.9.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentRipngRouteRedistEntry  

agentRipngRouteRedistSource 1.3.6.1.4.1.7244.2.30.2.9.1.1
Source route, from which RIPng can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), static(2), ospf(3)  

agentRipngRouteRedistMode 1.3.6.1.4.1.7244.2.30.2.9.1.2
User enabels/disables route-redistribution for a particular source protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentRipngRouteRedistMetric 1.3.6.1.4.1.7244.2.30.2.9.1.3
Metric used for redistributing a particular source protocol route into RIPng. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..15  

agentRipngRouteRedistMetricConfigured 1.3.6.1.4.1.7244.2.30.2.9.1.4
Flag to determine whether RIPng redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentRipngIfTable 1.3.6.1.4.1.7244.2.30.2.13
The Ripng Interface Table describes the inter- faces from the viewpoint of Ripng.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentRipngIfEntry

agentRipngIfEntry 1.3.6.1.4.1.7244.2.30.2.13.1
The Ripng Interface Entry describes one inter- face from the viewpoint of Ripng.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentRipngIfEntry  

agentRipngIfIndex 1.3.6.1.4.1.7244.2.30.2.13.1.1
The IfIndex associated with this instance.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentRipngIfAdminMode 1.3.6.1.4.1.7244.2.30.2.13.1.2
Configures interface mode of Ripng.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentRipngIfPassiveMode 1.3.6.1.4.1.7244.2.30.2.13.1.3
Flag to determine whether the interface is passive. A passive interface will not participate in the Ripng adjacency formation.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentRouterOspfv3ConfigGroup 1.3.6.1.4.1.7244.2.30.3
OBJECT IDENTIFIER    

agentOspfv3DefaultMetric 1.3.6.1.4.1.7244.2.30.3.1
Default metric of redistributed routes, when OSPFv3 redistributes from other protocols.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..16777214  

agentOspfv3DefaultMetricConfigured 1.3.6.1.4.1.7244.2.30.3.2
Flag to determine whether OSPFv3 default-metric is configured or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3DefaultInfoOriginate 1.3.6.1.4.1.7244.2.30.3.3
Flag to determine, whether OSPFv3 can advertise a default-route learned from another protocol.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3DefaultInfoOriginateAlways 1.3.6.1.4.1.7244.2.30.3.4
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3DefaultInfoOriginateMetric 1.3.6.1.4.1.7244.2.30.3.5
Metric of the default route,which OSPF advertises when learned from other protocol.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16777215  

agentOspfv3DefaultInfoOriginateMetricConfigured 1.3.6.1.4.1.7244.2.30.3.6
Flag to determine whether OSPF default-info originate metric is configured or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3DefaultInfoOriginateMetricType 1.3.6.1.4.1.7244.2.30.3.7
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER externalType1(1), externalType2(2)  

agentOspfv3RouteRedistTable 1.3.6.1.4.1.7244.2.30.3.8
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentOspfv3RouteRedistEntry

agentOspfv3RouteRedistEntry 1.3.6.1.4.1.7244.2.30.3.8.1
Tok_String
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentOspfv3RouteRedistEntry  

agentOspfv3RouteRedistSource 1.3.6.1.4.1.7244.2.30.3.8.1.1
Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER connected(1), static(2)  

agentOspfv3RouteRedistMode 1.3.6.1.4.1.7244.2.30.3.8.1.2
User enabels/disables route-redistribution for a particular source protocol.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentOspfv3RouteRedistMetric 1.3.6.1.4.1.7244.2.30.3.8.1.3
Metric used for redistributing a particular source protocol route into OSPF.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..16777214  

agentOspfv3RouteRedistMetricConfigured 1.3.6.1.4.1.7244.2.30.3.8.1.4
Flag to determine whether OSPF redistribute-metric is configured or not.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3RouteRedistMetricType 1.3.6.1.4.1.7244.2.30.3.8.1.5
Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER externalType1(1), externalType2(2)  

agentOspfv3RouteRedistTag 1.3.6.1.4.1.7244.2.30.3.8.1.6
It specifies the tag field in routes redistributed by OSPF.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

agentOspfv3IfTable 1.3.6.1.4.1.7244.2.30.3.9
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentOspfv3IfEntry

agentOspfv3IfEntry 1.3.6.1.4.1.7244.2.30.3.9.1
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentOspfv3IfEntry  

agentOspfv3IfIpMtuIgnoreFlag 1.3.6.1.4.1.7244.2.30.3.9.1.2
Configures the IP MTU Ignore Flag value for this OSPF interface.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

agentOspfv3IfPassiveMode 1.3.6.1.4.1.7244.2.30.3.9.1.3
Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentOspfv3LsdbTable 1.3.6.1.4.1.7244.2.30.3.10
The OSPF Process's Link State Database.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentOspfv3LsdbEntry

agentOspfv3LsdbEntry 1.3.6.1.4.1.7244.2.30.3.10.1
A single Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentOspfv3LsdbEntry  

agentOspfv3LsdbAreaId 1.3.6.1.4.1.7244.2.30.3.10.1.1
The 32 bit identifier of the Area from which the LSA was received.
Status: current Access: read-only
OBJECT-TYPE    
  AreaID  

agentOspfv3LsdbType 1.3.6.1.4.1.7244.2.30.3.10.1.2
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER illegalLSA(0), routerLink(1), networkLink(2), interNetwork(3), interRouter(4), asExternal(5), multicastGroup(6), nssaExternal(7), link(8), intraPrefix(9), unknownLink(10), unknownArea(11)  

agentOspfv3LsdbLsid 1.3.6.1.4.1.7244.2.30.3.10.1.3
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentOspfv3LsdbRouterId 1.3.6.1.4.1.7244.2.30.3.10.1.4
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current Access: read-only
OBJECT-TYPE    
  RouterID  

agentOspfv3LsdbSequence 1.3.6.1.4.1.7244.2.30.3.10.1.5
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentOspfv3LsdbAge 1.3.6.1.4.1.7244.2.30.3.10.1.6
This field is the age of the link state adver- tisement in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentOspfv3LsdbChecksum 1.3.6.1.4.1.7244.2.30.3.10.1.7
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentOspfv3LsdbAdvertisement 1.3.6.1.4.1.7244.2.30.3.10.1.8
The entire Link State Advertisement, including its header.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

agentOspfv3AutoCostRefBw 1.3.6.1.4.1.7244.2.30.3.14
Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
Status: current Access: read-write
OBJECT-TYPE    
  AutoCostRefBw  

agentOspfv3AsLsdbTable 1.3.6.1.4.1.7244.2.30.3.18
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentOspfv3AsLsdbEntry

agentOspfv3AsLsdbEntry 1.3.6.1.4.1.7244.2.30.3.18.1
A single Link State Advertisement.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentOspfv3AsLsdbEntry  

agentOspfv3AsLsdbType 1.3.6.1.4.1.7244.2.30.3.18.1.1
The type of the link state advertisement. Each link state type has a separate advertise- ment format.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER illegalLSA(0), routerLink(1), networkLink(2), interNetwork(3), interRouter(4), asExternal(5), multicastGroup(6), nssaExternal(7), link(8), intraPrefix(9), unknownLink(10), unknownArea(11)  

agentOspfv3AsLsdbLsid 1.3.6.1.4.1.7244.2.30.3.18.1.2
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

agentOspfv3AsLsdbRouterId 1.3.6.1.4.1.7244.2.30.3.18.1.3
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
Status: current Access: read-only
OBJECT-TYPE    
  RouterID  

agentOspfv3AsLsdbSequence 1.3.6.1.4.1.7244.2.30.3.18.1.4
The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentOspfv3AsLsdbAge 1.3.6.1.4.1.7244.2.30.3.18.1.5
This field is the age of the link state adver- tisement in seconds.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentOspfv3AsLsdbChecksum 1.3.6.1.4.1.7244.2.30.3.18.1.6
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
Status: current Access: read-only
OBJECT-TYPE    
  Integer32 0..2147483647  

agentOspfv3AsLsdbAdvertisement 1.3.6.1.4.1.7244.2.30.3.18.1.7
The entire Link State Advertisement, including its header.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(1..65535)  

agentOspfv3DefaultPassiveMode 1.3.6.1.4.1.7244.2.30.3.19
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPFv3 adjacency formation.
Status: current Access: read-write
OBJECT-TYPE    
  TruthValue  

agentIpv6IcmpControlGroup 1.3.6.1.4.1.7244.2.30.1.10
OBJECT IDENTIFIER    

agentIpv6IcmpRateLimitInterval 1.3.6.1.4.1.7244.2.30.1.10.1
Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..2147483647  

agentIpv6IcmpRateLimitBurstSize 1.3.6.1.4.1.7244.2.30.1.10.2
Specifies the number of tokens to be placed after timeout.
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 1..200  

agentDhcp6ClientParametersTable 1.3.6.1.4.1.7244.2.30.1.11
Information about the DHCPv6 Client parameters on the interfaces.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AgentDhcp6ClientParametersEntry

agentDhcp6ClientParametersEntry 1.3.6.1.4.1.7244.2.30.1.11.1
DHCPv6 Client information on an interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  AgentDhcp6ClientParametersEntry  

agentDhcp6ClientInterfaceIndex 1.3.6.1.4.1.7244.2.30.1.11.1.1
The Interface index on which the IPv6 address is leased by the DHCPv6 Server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientPrefix 1.3.6.1.4.1.7244.2.30.1.11.1.2
The IPv6 Prefix leased by the DHCPv6 Server.
Status: current Access: read-only
OBJECT-TYPE    
  Ipv6AddressPrefix  

agentDhcp6ClientPrefixlength 1.3.6.1.4.1.7244.2.30.1.11.1.3
The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

agentDhcp6ClientState 1.3.6.1.4.1.7244.2.30.1.11.1.4
The State of the DHCPv6 Client on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER inactive(0), solicit(1), request(2), active(3), renew(4), rebind(5), release(6)  

agentDhcp6ClientServerDUID 1.3.6.1.4.1.7244.2.30.1.11.1.5
The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString Size(1..255)  

agentDhcp6ClientT1Time 1.3.6.1.4.1.7244.2.30.1.11.1.6
The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientT2Time 1.3.6.1.4.1.7244.2.30.1.11.1.7
The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientIAID 1.3.6.1.4.1.7244.2.30.1.11.1.8
An identifier for an identity association chosen by this Client.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientPreferredLifeTime 1.3.6.1.4.1.7244.2.30.1.11.1.9
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientValidLifeTime 1.3.6.1.4.1.7244.2.30.1.11.1.10
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientRenewTime 1.3.6.1.4.1.7244.2.30.1.11.1.11
The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

agentDhcp6ClientExpireTime 1.3.6.1.4.1.7244.2.30.1.11.1.12
The time (in seconds) when the DHCPv6 leased address expires.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor