RCV3

File: RCV3.mib (89764 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB RFC-1212

Imported symbols

enterprises IpAddress Counter
DisplayString OBJECT-TYPE ifIndex

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

PbeShaEncryptedObject  
OCTET STRING    

Rc3InterfaceEntry  
SEQUENCE    
  rc3InterfaceIp IpAddress
  rc3InterfaceMask IpAddress
  rc3InterfaceMac OCTET STRING

Rc3IpRouteEntry  
SEQUENCE    
  rc3IpRouteDest IpAddress
  rc3IpRouteMask IpAddress
  rc3IpRouteIfIndex INTEGER
  rc3IpRouteNextHop IpAddress
  rc3IpRouteMetric INTEGER
  rc3IpRouteProto INTEGER
  rc3IpRouteAge INTEGER
  rc3IpRouteRowStatus RowStatus

Rc3StatusMsgEntry  
SEQUENCE    
  rc3StatusMsgIndex INTEGER
  rc3FirstInTimeStamp INTEGER
  rc3LastInTimeStamp INTEGER
  rc3EventCode INTEGER
  rc3EventCodeRepetitions INTEGER
  rc3EventSpecificDescr1 OCTET STRING
  rc3EventSpecificDescr2 OCTET STRING

Rc3SysLogServerEntry  
SEQUENCE    
  rc3SysLogServerIp IpAddress
  rc3SysLogServerPort INTEGER
  rc3SysLogPriorityLevel INTEGER
  rc3SysLogMsgStatus RowStatus

Rc3TrapRcvrEntry  
SEQUENCE    
  rc3TrapRcvrIpAddr IpAddress
  rc3TrapRcvrComm OCTET STRING
  rc3TrapRcvrType INTEGER
  rc3TrapRcvrStatus RowStatus

Rc3RadiusAuthServerEntry  
SEQUENCE    
  rc3RadiusAuthServerEntryIndx INTEGER
  rc3RadiusAuthServerIP IpAddress
  rc3RadiusAuthServerPort INTEGER
  rc3RadiusAttributeOffset INTEGER
  rc3RadiusAuthServerSharedSecret OCTET STRING
  rc3RadiusAuthServerRetries INTEGER
  rc3RadiusAuthServerSharedSecretFips PbeShaEncryptedObject

Rc3LocalAuthEntry  
SEQUENCE    
  rc3LocalAuthId INTEGER
  rc3LocalAuthName DisplayString
  rc3LocalAuthPassword PbeShaEncryptedObject
  rc3LocalAuthIpAddr IpAddress
  rc3LocalAuthIpMask IpAddress
  rc3LocalAuthRowStatus RowStatus

Rc3CACertEntry  
SEQUENCE    
  rc3CACertIndex INTEGER
  rc3CACertName DisplayString
  rc3CACertData OCTET STRING
  rc3CACertStatus RowStatus

Rc3UserCertEntry  
SEQUENCE    
  rc3UserCertIndex INTEGER
  rc3UserCertName OCTET STRING
  rc3UserCertData OCTET STRING
  rc3UserCertStatus RowStatus

Rc3IsakmpProposalEntry  
SEQUENCE    
  rc3IsakmpProposalIndx INTEGER
  rc3IsakmpProposalEncryption INTEGER
  rc3IsakmpProposalHash INTEGER
  rc3IsakmpProposalAuthMode INTEGER
  rc3IsakmpProposalDhGroup INTEGER

Rc3EspProposalEntry  
SEQUENCE    
  rc3EspProposalIndx INTEGER
  rc3EspProposalCipherAlgo INTEGER
  rc3EspProposalEncapsulation INTEGER
  rc3EspProposalAuth INTEGER
  rc3EspProposalGroup INTEGER

Rc3AhProposalEntry  
SEQUENCE    
  rc3AhProposalIndx INTEGER
  rc3AhProposalAuth INTEGER
  rc3AhProposalEncapsulation INTEGER
  rc3AhProposalGroup INTEGER

Rc3EipProposalEntry  
SEQUENCE    
  rc3EipProposalIndx INTEGER
  rc3EipProposalCipherAlgo INTEGER

Rc3PdePeerInfoEntry  
SEQUENCE    
  rc3PdePeerIndx INTEGER
  rc3PdePeerType INTEGER
  rc3PdePeerAddr IpAddress
  rc3PdePeerDN OCTET STRING
  rc3PdePeerIssuerDN OCTET STRING
  rc3PdePeerLocalCertIndx INTEGER
  rc3PdePeerKeyMgmtType INTEGER
  rc3PdePeerKeyMgmtIndx INTEGER
  rc3PdePeerIpsecProtocolIndx INTEGER
  rc3PdePeerIfIndex INTEGER
  rc3PdePeerNextHop IpAddress
  rc3PdePeerContinue INTEGER
  rc3PdePeerIsakmpLifeType INTEGER
  rc3PdePeerIsakmpLifeTimeSeconds INTEGER
  rc3PdePeerIsakmpLifeTimeKiloBytes INTEGER
  rc3PdePeerIpsecLifeType INTEGER
  rc3PdePeerIpsecLifeTimeSeconds INTEGER
  rc3PdePeerIpsecLifeTimeKiloBytes INTEGER
  rc3PdePeerRowStatus RowStatus
  rc3PdeFilterProtocol INTEGER
  rc3PdeLocalPort INTEGER
  rc3PdeRemotePort INTEGER
  rc3PdeName DisplayString
  rc3PdeULA INTEGER
  rc3PdePeerLocalInterfaceIpAddr IpAddress

Rc3PdeLocalNetworkEntry  
SEQUENCE    
  rc3PdeLocalNetworkNumber IpAddress
  rc3PdeLocalNetworkMask IpAddress
  rc3PdeLocalNetworkRowStatus RowStatus

Rc3PdeRemoteNetworkEntry  
SEQUENCE    
  rc3PdeRemoteNetworkNumber IpAddress
  rc3PdeRemoteNetworkMask IpAddress
  rc3PdeRemoteNetworkRowStatus RowStatus

Rc3SAStatEntry  
SEQUENCE    
  rc3SAStatPeerAddr IpAddress
  rc3SAStatConnStatus INTEGER
  rc3SAStatCreateTime INTEGER
  rc3SAStatEncryptPktCount Counter
  rc3SAStatEncryptByteCount Counter
  rc3SAStatDecryptPktCount Counter
  rc3SAStatDecryptByteCount Counter
  rc3SAStatFragPktCount Counter
  rc3SAStatReset INTEGER
  rc3SAStatUserName DisplayString
  rc3SAStatPollsSent Counter
  rc3SAStatPollsReceived Counter
  rc3SAStatPollsAverageTime INTEGER
  rc3SAStatPollsMaxTime INTEGER
  rc3SAStatPollsMinTime INTEGER

Rc3PdeManualKeyMgmtEntry  
SEQUENCE    
  rc3PdeManualKeyMgmtIndx INTEGER
  rc3PdeManualInboundEncryptKey OCTET STRING
  rc3PdeManualOutboundEncryptKey OCTET STRING
  rc3PdeManualInboundAuthKey OCTET STRING
  rc3PdeManualOutboundAuthKey OCTET STRING
  rc3PdeManualInboundSpi INTEGER
  rc3PdeManualOutboundSpi INTEGER
  rc3PdeManualKeyMgmtRowStatus RowStatus
  rc3PdeManualInboundEncryptKeyFips PbeShaEncryptedObject
  rc3PdeManualOutboundEncryptKeyFips PbeShaEncryptedObject
  rc3PdeManualInboundAuthKeyFips PbeShaEncryptedObject
  rc3PdeManualOutboundAuthKeyFips PbeShaEncryptedObject

Rc3PdeIsakmpKeyMgmtEntry  
SEQUENCE    
  rc3PdeIsakmpIndx INTEGER
  rc3PdeIsakmpProposals OCTET STRING
  rc3PdeIsakmpRetries INTEGER
  rc3PdeIsakmpAuthPresharedKey OCTET STRING
  rc3PdeIsakmpPfs INTEGER
  rc3PdeIsakmpRowStatus RowStatus
  rc3PdeIsakmpAuthPresharedKeyFips PbeShaEncryptedObject

Rc3PdeIpsecProtocolEntry  
SEQUENCE    
  rc3PdeIpsecProtocolIndx INTEGER
  rc3PdeIpsecProtocolType INTEGER
  rc3PdeIpsecProposals OCTET STRING
  rc3PdeIpsecProtocolRowStatus RowStatus

Rc3PdeSelectProtocolTableEntry  
SEQUENCE    
  rc3PdeSelectProtocol INTEGER
  rc3PdeSelectPort INTEGER
  rc3PdeSelectAction INTEGER
  rc3PdeSelectRowStatus RowStatus

Defined Values

redCreek 1.3.6.1.4.1.1958
OBJECT IDENTIFIER    

products 1.3.6.1.4.1.1958.1
OBJECT IDENTIFIER    

registration 1.3.6.1.4.1.1958.2
OBJECT IDENTIFIER    

rcRavlin 1.3.6.1.4.1.1958.1.1
OBJECT IDENTIFIER    

rcAdmin 1.3.6.1.4.1.1958.1.1.1
OBJECT IDENTIFIER    

rcSecure 1.3.6.1.4.1.1958.1.1.2
OBJECT IDENTIFIER    

rcBoot 1.3.6.1.4.1.1958.1.1.3
OBJECT IDENTIFIER    

rcStatus 1.3.6.1.4.1.1958.1.1.4
OBJECT IDENTIFIER    

rcTrap 1.3.6.1.4.1.1958.1.1.5
OBJECT IDENTIFIER    

rcDebug 1.3.6.1.4.1.1958.1.1.6
OBJECT IDENTIFIER    

rcEsp 1.3.6.1.4.1.1958.1.1.7
OBJECT IDENTIFIER    

rcMgmt 1.3.6.1.4.1.1958.1.1.8
OBJECT IDENTIFIER    

rcPolicy 1.3.6.1.4.1.1958.1.1.9
OBJECT IDENTIFIER    

rcRavlin10 1.3.6.1.4.1.1958.2.1
OBJECT IDENTIFIER    

rcRavlin4 1.3.6.1.4.1.1958.2.2
OBJECT IDENTIFIER    

rcPCI 1.3.6.1.4.1.1958.2.3
OBJECT IDENTIFIER    

rcRavlin10Ver3 1.3.6.1.4.1.1958.2.4
OBJECT IDENTIFIER    

rcRavlin4Ver3 1.3.6.1.4.1.1958.2.5
OBJECT IDENTIFIER    

rcPCIVer3 1.3.6.1.4.1.1958.2.6
OBJECT IDENTIFIER    

rc3System 1.3.6.1.4.1.1958.1.1.8.1
OBJECT IDENTIFIER    

rc3Network 1.3.6.1.4.1.1958.1.1.8.2
OBJECT IDENTIFIER    

rc3Control 1.3.6.1.4.1.1958.1.1.8.3
OBJECT IDENTIFIER    

rc3Stat 1.3.6.1.4.1.1958.1.1.8.4
OBJECT IDENTIFIER    

rc3Snmp 1.3.6.1.4.1.1958.1.1.8.5
OBJECT IDENTIFIER    

rc3ClientCfg 1.3.6.1.4.1.1958.1.1.8.6
OBJECT IDENTIFIER    

rc3Download 1.3.6.1.4.1.1958.1.1.8.7
OBJECT IDENTIFIER    

rc3Misc 1.3.6.1.4.1.1958.1.1.8.8
OBJECT IDENTIFIER    

rc3Cert 1.3.6.1.4.1.1958.1.1.8.9
OBJECT IDENTIFIER    

rc3Proposals 1.3.6.1.4.1.1958.1.1.9.1
OBJECT IDENTIFIER    

rc3Pde 1.3.6.1.4.1.1958.1.1.9.2
OBJECT IDENTIFIER    

rc3PdMisc 1.3.6.1.4.1.1958.1.1.9.3
OBJECT IDENTIFIER    

rc3BootRomVer 1.3.6.1.4.1.1958.1.1.8.1.1
Boot Rom Software version, in the form 'major.minor[letters]'. If the version is unknown or not avaliable then the value should be a zero length string.
OBJECT-TYPE    
  DisplayString Size(0..12)  

rc3FirmwareVer 1.3.6.1.4.1.1958.1.1.8.1.2
Software version, in the form 'major.minor[letters]'. If the version is unknown or not avaliable then the value should be a zero length string.
OBJECT-TYPE    
  DisplayString Size(0..12)  

rc3FirmwareID 1.3.6.1.4.1.1958.1.1.8.1.3
A Textual description to identify the firmware on the Ravlin.
OBJECT-TYPE    
  DisplayString Size(0..24)  

rc3HardwareVer 1.3.6.1.4.1.1958.1.1.8.1.4
Hardware version, in the form 'major.minor[letters]'. If the version is unknown or not avaliable then the value should be a zero length string.
OBJECT-TYPE    
  DisplayString Size(0..12)  

rc3DistinguishedName 1.3.6.1.4.1.1958.1.1.8.1.5
Factory Assigned Unique Security ID for the Ravlin Unit. It consists of three parts of the form 'mmmCK-xxx-sssss'. mmm - is the model number. CK - is a single digit checksum xxx,sssss - is a sequence number.
OBJECT-TYPE    
  DisplayString  

rc3HostName 1.3.6.1.4.1.1958.1.1.8.1.6
Host name assigned to the Ravlin unit. If host name exists, then it is used as the DHCP host name, else rcDistinguishedName is used. Hence the name must be unique in a single DHCP scope. Max Size for Host name is 15 characters.
OBJECT-TYPE    
  DisplayString Size(0..15)  

rc3InterfaceTable 1.3.6.1.4.1.1958.1.1.8.2.1
Interface table, for the Ravlin unit. This is a fixed sized table. The size of the table is determined by the value of ifNumber. Entries cannot be added or deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3InterfaceEntry

rc3InterfaceEntry 1.3.6.1.4.1.1958.1.1.8.2.1.1
An interface entry containing objects at the subnetwork layer and below for a particular interface.
OBJECT-TYPE    
  Rc3InterfaceEntry  

rc3InterfaceIp 1.3.6.1.4.1.1958.1.1.8.2.1.1.2
The interface's address at the network layer in the protocol stack.
OBJECT-TYPE    
  IpAddress  

rc3InterfaceMask 1.3.6.1.4.1.1958.1.1.8.2.1.1.3
The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0.
OBJECT-TYPE    
  IpAddress  

rc3InterfaceMac 1.3.6.1.4.1.1958.1.1.8.2.1.1.4
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
OBJECT-TYPE    
  OCTET STRING  

rc3IpRouteTable 1.3.6.1.4.1.1958.1.1.8.2.2
The routing table for this Ravlin.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3IpRouteEntry

rc3IpRouteEntry 1.3.6.1.4.1.1958.1.1.8.2.2.1
A route to a particular destination.
OBJECT-TYPE    
  Rc3IpRouteEntry  

rc3IpRouteDest 1.3.6.1.4.1.1958.1.1.8.2.2.1.1
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. This value should be logical-ANDed with the rc3IpRouteMask prior to being added to the table.
OBJECT-TYPE    
  IpAddress  

rc3IpRouteMask 1.3.6.1.4.1.1958.1.1.8.2.2.1.2
Indicates the mask that will be logical-ANDed with the destination address before being compared to the value in the rc3IpRouteDest field.
OBJECT-TYPE    
  IpAddress  

rc3IpRouteIfIndex 1.3.6.1.4.1.1958.1.1.8.2.2.1.3
The index value which uniquely identifies the local interface through which the next hop of this route should be reached.
OBJECT-TYPE    
  INTEGER  

rc3IpRouteNextHop 1.3.6.1.4.1.1958.1.1.8.2.2.1.4
The IP address of the next hop of this route.
OBJECT-TYPE    
  IpAddress  

rc3IpRouteMetric 1.3.6.1.4.1.1958.1.1.8.2.2.1.5
The primary routing metric for this route.
OBJECT-TYPE    
  INTEGER  

rc3IpRouteProto 1.3.6.1.4.1.1958.1.1.8.2.2.1.6
The routing mechanism via which this route was learned.
OBJECT-TYPE    
  INTEGER other(1), local(2), netmgmt(3), icmp(4), egp(5), ggp(6), hello(7), rip(8), is-is(9), es-is(10), ciscoIgrp(11), bbnSpfIgp(12), ospf(13), bgp(14)  

rc3IpRouteAge 1.3.6.1.4.1.1958.1.1.8.2.2.1.7
The number of seconds since this route was last updated or otherwise determined to be correct.
OBJECT-TYPE    
  INTEGER  

rc3IpRouteRowStatus 1.3.6.1.4.1.1958.1.1.8.2.2.1.8
This object is used to create/delete rows from the IP Route Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PacketHandlingOptions 1.3.6.1.4.1.1958.1.1.8.2.3
This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Forward non-IP Traffic in Bridge Mode Bit 1 - Forward Local IP Traffic in Bridge Mode Bit 2 - Forward MAC Broadcast in Bridge Mode Bit 3 - Forward IP Broadcast in Router Mode Bit 4 - Send ICMP Re-Direct Messages in Router Mode Bit 5 - Forward Multicast Bit 6 - ARP proxy on the Remote Port Bit 7 - Ignore Don't frag bit. Default is disable. In default mode, if - the Don't frag bit is set, and packets needs to be fragmented - then Ravlin will send ICMP back to the sender and drop the packet. Bit 8 - NAT packets matching bypass selector list. Bit 9 - SNMP access on Remote port in clear. Default is enabled. If disabled then the ONLY way to access the device from the Remote side is to manage it via a tunnel. Note - 0 Allow SNMP on remote in the clear. - 1 Allow SNMP on remote thru. the tunnel. -- Enable/Disable is reversed for bit 9 to avoid hassles in backward -- compatibility Bit 10 - Enable/Disable PPPoE on Remote Port - Default is disable. Note - 1 Enable - 0 Disable Bit 11 - Enable/Disable PPPoE connect on Demand - Default is disable. Note - 1 Enable - 0 Disable Bit 29 - Enable/Disable listening to unsolicited ARP on local port. Default is disable. Note - 1 Enable - 0 Disable Bit 30 - Enable/Disable cascading packets from one gateway to another. Default is disable. Note - 1 Enable - 0 Disable The flags specifying behavior for bridge mode are ignored when the device is in router mode, and the flags specifying behavior for router mode are ignored when the device is in bridge mode.
OBJECT-TYPE    
  INTEGER  

rc3PPPoEUserName 1.3.6.1.4.1.1958.1.1.8.2.4
User name
OBJECT-TYPE    
  DisplayString Size(0..20)  

rc3PPPoEUserPassword 1.3.6.1.4.1.1958.1.1.8.2.5
User Password. Password will be encrypted by RNM when doing a set. Get for user password
OBJECT-TYPE    
  DisplayString Size(0..20)  

rc3PPPoEServiceName 1.3.6.1.4.1.1958.1.1.8.2.6
Service Name.
OBJECT-TYPE    
  DisplayString Size(0..20)  

rc3PPPoEConcentratorName 1.3.6.1.4.1.1958.1.1.8.2.7
PPPoE Concentrator Name.
OBJECT-TYPE    
  DisplayString Size(0..20)  

rc3PPPoEIdleTimeout 1.3.6.1.4.1.1958.1.1.8.2.8
The duration in minutes to timeout PPPoE connection when there is no traffic.Default is 10 minutes.
OBJECT-TYPE    
  INTEGER  

rc3PPPoERetryCount 1.3.6.1.4.1.1958.1.1.8.2.9
Retry count for PPPoE. Default is 10.
OBJECT-TYPE    
  INTEGER  

rc3PPPoEDnsServer1 1.3.6.1.4.1.1958.1.1.8.2.10
IP address of DNS server1. When Ravlin is enabled to get its remote interface attributes via PPPoE, it will also provide DNS server IP address. This is a read-only attribute, the user can use to setup his end host.
OBJECT-TYPE    
  IpAddress  

rc3PPPoEDnsServer2 1.3.6.1.4.1.1958.1.1.8.2.11
IP address of DNS server1. When Ravlin is enabled to get its remote interface attributes via PPPoE, it will also provide DNS server IP address. This is a read-only attribute, the user can use to setup his end host.
OBJECT-TYPE    
  IpAddress  

rc3Reset 1.3.6.1.4.1.1958.1.1.8.3.1
Action object to do the following: warmstart - Reboots the device. Firmware and configuration information is maintained. clearallactiveSA - All active SA entries are removed. clearARPcache - All entries in the ARP cache are removed. clearmessagetable - All entries in the status message table will be removed. resettodefaults - IP address and subnet mask are maintained. All other configuration information is removed. Firmware is maintained. resettofactorydefaults - All configuration information is removed. Firmware is maintained. eraseflash - Firmware is removed and the device will be in BOOT ROM mode. Configuration information is maintained. disablebox - Delete Box's manufactured certificate and private key. ** ** WARNING: this function will render the Ravlin box useless. ** Use only when device is no longer required to be in service FOREVER. **
OBJECT-TYPE    
  INTEGER other(1), warmstart(2), clearallactiveSA(3), clearARPcache(4), clearmessagetable(5), resettodefaults(6), resettofactorydefaults(7), eraseflash(8), disablebox(9)  

rc3ArpCacheCleanupInterval 1.3.6.1.4.1.1958.1.1.8.3.2
The duration in minutes to cleanup ARP cache.
OBJECT-TYPE    
  INTEGER  

rc3Password 1.3.6.1.4.1.1958.1.1.8.3.3
Object used to set new password for the box. For SNMP set operations the password is encrypted. The key for encrypt/Decrypt is generated by hashing the old password and a selector value. The default password is 1234. On read an octet string of zero length is returned.
OBJECT-TYPE    
  OCTET STRING Size(1..16)  

rc3OperationalMode 1.3.6.1.4.1.1958.1.1.8.3.4
The desired state of the Ravlin. For the passall and vpnready modes, the device will act as either a router or a bridge depending on the configuration of the network interfaces. If the two interfaces are on the same network, then the device will function as a bridge, otherwise it will function as a router. passall - all traffic either in bridge or router mode. blockall - drop all incoming packets. vpnready - use the policy database and configuration flags to determine which traffic to pass, block, or apply security. standby - (READ-ONLY) drop all incoming packets, until the device configuration is not complete. EUse this mode, when the remote interface has DHCP or PPPoE enabled.
OBJECT-TYPE    
  INTEGER passall(1), blockall(2), vpnready(3), standby(4)  

rc3InactiveClientTimeout 1.3.6.1.4.1.1958.1.1.8.3.5
The duration in minutes to tear down the SA between the RavSoft client and Ravlin server.
OBJECT-TYPE    
  INTEGER  

rc3DHCPServerIP 1.3.6.1.4.1.1958.1.1.8.3.6
IP Address of the DHCP server. This address can ONLY configured manually by SNMP.
OBJECT-TYPE    
  IpAddress  

rc3DHCPRequest 1.3.6.1.4.1.1958.1.1.8.3.7
This is Bit Masked Object. Zero or more bits can be set or cleared. Bit 0 - Enable/Disable DHCP on the Local Port Bit 1 - Enable/Disable DHCP on the Remote Port Bit 2 - Tunnel local host's DHCP request If the Bit is set, then DHCP is enabled, else it is disabled. By default DHCP is enabled on both ports.
OBJECT-TYPE    
  INTEGER  

rc3PasswordFips 1.3.6.1.4.1.1958.1.1.8.3.8
Available for release 3.30 and up. Object used to set new password for the box. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. The default password is 1234. On read an octet string of zero length is returned. Password string size (1..20)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3DHCPRelayIpAddr 1.3.6.1.4.1.1958.1.1.8.3.9
IP Address to be used for DHCP Relay. This is used when the Ravlin unit redeives a DHCP request from the Ravsoft client.
OBJECT-TYPE    
  IpAddress  

rc3SysPerfTimeBetweenPolls 1.3.6.1.4.1.1958.1.1.8.3.10
Time in seconds after which the polling will occur. A value of 0 means that this Ravlin will not poll. Default value is zero(0). The minimum value can be set is 30 seconds and maximum is 600 seconds.
OBJECT-TYPE    
  INTEGER  

rc3SysPerfTimeBetweenReports 1.3.6.1.4.1.1958.1.1.8.3.11
Time in seconds after which reporting will occur.
OBJECT-TYPE    
  INTEGER  

rc3SysPerfTrapThreshold 1.3.6.1.4.1.1958.1.1.8.3.12
This is the threshold of packet loss below which a warning trap will be generated. This threshold is measured in percentage of packets sent versus packets received.
OBJECT-TYPE    
  INTEGER  

rc3DHCPBroadcastIntf 1.3.6.1.4.1.1958.1.1.8.3.13
Indentify the interface to broadcast DHCP requests. When the DHCP server IP Address is not a broadcast address, then SNMP agent will return a value of notApplicable. Manager CANNOT set this object to notApplicable.
OBJECT-TYPE    
  INTEGER local(1), remote(2), notApplicable(3)  

rc3StateLessDHCP 1.3.6.1.4.1.1958.1.1.8.3.14
Enables a head end device not to keep state information for DHCP records, used in DHCP relay. This will allow head end to be in cluster topology. When enabled, DHCP records will exchanged via ISAKMP private notify messages after ISAKMP SA is established. If disabled then DHCP records are saved in NVM.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rc3ActiveSAcount 1.3.6.1.4.1.1958.1.1.8.4.1
Number of active Secure Associations(SA).
OBJECT-TYPE    
  INTEGER  

rc3PendingSAcount 1.3.6.1.4.1.1958.1.1.8.4.2
Number of pending Secure Associations.
OBJECT-TYPE    
  INTEGER  

rc3SigFailCount 1.3.6.1.4.1.1958.1.1.8.4.3
Indicates number of times the signature failed.
OBJECT-TYPE    
  INTEGER  

rc3StatusMsgTable 1.3.6.1.4.1.1958.1.1.8.4.4
The table containing the status messages for this device. This entire table is read-only.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3StatusMsgEntry

rc3StatusMsgEntry 1.3.6.1.4.1.1958.1.1.8.4.4.1
An entry in the status message table. For status messages that repeat, only one entry is used, and the rc3EventCodeRepetitions filed identifies the number of consecutive messages of that type that have occurred. This should prevent the table from being wiped out by a series of consecutive messages of the same type. The entire table can be cleared using rc3Reset.
OBJECT-TYPE    
  Rc3StatusMsgEntry  

rc3StatusMsgIndex 1.3.6.1.4.1.1958.1.1.8.4.4.1.1
This value is used as a unique identifier for each entry.
OBJECT-TYPE    
  INTEGER  

rc3FirstInTimeStamp 1.3.6.1.4.1.1958.1.1.8.4.4.1.2
The time when this message was first generated.
OBJECT-TYPE    
  INTEGER  

rc3LastInTimeStamp 1.3.6.1.4.1.1958.1.1.8.4.4.1.3
The time when this message was last generated.
OBJECT-TYPE    
  INTEGER  

rc3EventCode 1.3.6.1.4.1.1958.1.1.8.4.4.1.4
An identifier of the event caused the status message to be generated.
OBJECT-TYPE    
  INTEGER  

rc3EventCodeRepetitions 1.3.6.1.4.1.1958.1.1.8.4.4.1.5
The number of times in a row this event occurred.
OBJECT-TYPE    
  INTEGER  

rc3EventSpecificDescr1 1.3.6.1.4.1.1958.1.1.8.4.4.1.6
If the event code maps to a string that contains '%1', this value will be substituted for the '%1' when the string is displayed.
OBJECT-TYPE    
  OCTET STRING  

rc3EventSpecificDescr2 1.3.6.1.4.1.1958.1.1.8.4.4.1.7
If the event code maps to a string that contains '%2', this value will be substituted for the '%2' when the string is displayed.
OBJECT-TYPE    
  OCTET STRING  

rc3SysLogServerIP 1.3.6.1.4.1.1958.1.1.8.4.5
IP Address of the syslog server.
OBJECT-TYPE    
  IpAddress  

rc3SysLogPortNum 1.3.6.1.4.1.1958.1.1.8.4.6
Port number for the syslog service.
OBJECT-TYPE    
  INTEGER  

rc3SysLogMsgLevel 1.3.6.1.4.1.1958.1.1.8.4.7
Specify how verbose the message logging should be.
OBJECT-TYPE    
  INTEGER critical(1), severe(2), error(3), warning(4), normal(5), debug(6), invalid(7)  

rc3SysLogServerTable 1.3.6.1.4.1.1958.1.1.8.4.8
The table containing the list of syslog server IP Address, syslog port, and priority of syslog message it will receive.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3SysLogServerEntry

rc3SysLogServerEntry 1.3.6.1.4.1.1958.1.1.8.4.8.1
An entry in the syslog server table. This table can have zero to five entries.
OBJECT-TYPE    
  Rc3SysLogServerEntry  

rc3SysLogServerIp 1.3.6.1.4.1.1958.1.1.8.4.8.1.1
This value is used as a unique identifier for each entry.
OBJECT-TYPE    
  IpAddress  

rc3SysLogServerPort 1.3.6.1.4.1.1958.1.1.8.4.8.1.2
This value is used as a unique identifier for each entry.
OBJECT-TYPE    
  INTEGER  

rc3SysLogPriorityLevel 1.3.6.1.4.1.1958.1.1.8.4.8.1.3
Specify how verbose the message logging should be.
OBJECT-TYPE    
  INTEGER critical(1), severe(2), error(3), warning(4), normal(5), debug(6)  

rc3SysLogMsgStatus 1.3.6.1.4.1.1958.1.1.8.4.8.1.4
This object is used to create/delete rows from the SYSLOG server Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3ReadCommunityString 1.3.6.1.4.1.1958.1.1.8.5.1
This object is used to change Read Community string public. For SNMP set operations the string is encrypted. The key for encrypt/Decrypt is generated by hashing the password and a selector value. This object will return NULL for get/getnext.
OBJECT-TYPE    
  DisplayString Size(1..20)  

rc3WriteCommunityString 1.3.6.1.4.1.1958.1.1.8.5.2
This object is used to change Write Community string private. For SNMP set operations the string is encrypted. The key for encrypt/Decrypt is generated by hashing the password and a selector value. This object will return NULL for get/getnext.
OBJECT-TYPE    
  DisplayString Size(1..20)  

rc3TrapRcvrTable 1.3.6.1.4.1.1958.1.1.8.5.3
A Table to register SNMP Manager IP Address and community string to receive TRAP's from Ravlin Unit. This table can have a maximum of 5 entries.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3TrapRcvrEntry

rc3TrapRcvrEntry 1.3.6.1.4.1.1958.1.1.8.5.3.1
A row in the Trap Receiver Table. Rows in this table can be created or Deleted.
OBJECT-TYPE    
  Rc3TrapRcvrEntry  

rc3TrapRcvrIpAddr 1.3.6.1.4.1.1958.1.1.8.5.3.1.1
The IP Address of the SNMP Manager that would receive TRAP.
OBJECT-TYPE    
  IpAddress  

rc3TrapRcvrComm 1.3.6.1.4.1.1958.1.1.8.5.3.1.2
Community string used by SNMP Manager.
OBJECT-TYPE    
  OCTET STRING Size(0..20)  

rc3TrapRcvrType 1.3.6.1.4.1.1958.1.1.8.5.3.1.3
Specifies the types of TRAPS that this manager should received.
OBJECT-TYPE    
  INTEGER  

rc3TrapRcvrStatus 1.3.6.1.4.1.1958.1.1.8.5.3.1.4
This object is used to create/delete rows from the TRAP Receiver Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3SnmpErrorCode 1.3.6.1.4.1.1958.1.1.8.5.4
This object will return the reason for the last SNMP SET error. Since SNMPv1 has a limited number of error codes, this object provides an extension to report specific enterprise errors.
OBJECT-TYPE    
  INTEGER  

rc3ReadCommunityStringFips 1.3.6.1.4.1.1958.1.1.8.5.5
Available for release 3.30 and up. Object used to set read community string for this device. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. The default ReadCommunityString is 'public'. On read an octet string of zero length is returned. read community string SIZE(1..20)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3WriteCommunityStringFips 1.3.6.1.4.1.1958.1.1.8.5.6
Available for release 3.30 and up. Object used to set write community string for this device. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. The default WriteCommunityString is 'private'. On read an octet string of zero length is returned. write community string SIZE(1..20)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3ClientAuthentication 1.3.6.1.4.1.1958.1.1.8.6.1
Enable or Disable client Authentication. There are two Authentication methods. Either RADIUS or LOCAL. Client Authentication is not avaliable on the personal Ravlin.
OBJECT-TYPE    
  INTEGER enableRadius(1), disableAuthentication(2), enableLocal(3)  

rc3ActiveRadiusServer 1.3.6.1.4.1.1958.1.1.8.6.2
Specify the current active RADIUS server by its IP Address. If this RADIUS server is not responding, then the agent will direct RADIUS requests to the next preferred RADIUS server in the list, and accordingly change the value of this object to indicate the active server.
OBJECT-TYPE    
  IpAddress  

rc3RadiusPriority 1.3.6.1.4.1.1958.1.1.8.6.3
Specify the priority of the Radius servers in the table. Each octet will specify one of the entries in order of preference.
OBJECT-TYPE    
  OCTET STRING Size(1..3)  

rc3RadiusAuthServerTable 1.3.6.1.4.1.1958.1.1.8.6.4
Table, to setup Primary and/or Secondary Authentication Server. This is a fixed sized table. RADIUS packets will be routed to their destination using the Route Table.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3RadiusAuthServerEntry

rc3RadiusAuthServerEntry 1.3.6.1.4.1.1958.1.1.8.6.4.1
RADIUS Auth Server entry containing all the attributes required to configure Auth Server. There will be a maximum of three entries in the table. If rc3RadiusAuthServerIP is 0.0.0.0, then that row is not used.
OBJECT-TYPE    
  Rc3RadiusAuthServerEntry  

rc3RadiusAuthServerEntryIndx 1.3.6.1.4.1.1958.1.1.8.6.4.1.1
A unique identifier for the entry in this table. Valid values are 1-3.
OBJECT-TYPE    
  INTEGER 1..3  

rc3RadiusAuthServerIP 1.3.6.1.4.1.1958.1.1.8.6.4.1.2
The IP Address (Network Address), of the RADIUS Authentication server.
OBJECT-TYPE    
  IpAddress  

rc3RadiusAuthServerPort 1.3.6.1.4.1.1958.1.1.8.6.4.1.3
Specifies the UDP port number used by the RADIUS service on the Authentication Server.
OBJECT-TYPE    
  INTEGER  

rc3RadiusAttributeOffset 1.3.6.1.4.1.1958.1.1.8.6.4.1.4
If zero, then use vendor specific attributes. Otherwise this object specifies the first offset to use for the RedCreek attribute values.
OBJECT-TYPE    
  INTEGER  

rc3RadiusAuthServerSharedSecret 1.3.6.1.4.1.1958.1.1.8.6.4.1.5
This is the shared secret between the Ravlin and Radius Server. For SNMP set operations the string is encrypted. The key for encrypt/Decrypt is generated by hashing the password and a selector value. This object will return NULL for get/getnext.
OBJECT-TYPE    
  OCTET STRING  

rc3RadiusAuthServerRetries 1.3.6.1.4.1.1958.1.1.8.6.4.1.6
This limits the number of retries with the Authentication Server. Default is 3. Maximum is 5. Min is 1
OBJECT-TYPE    
  INTEGER  

rc3RadiusAuthServerSharedSecretFips 1.3.6.1.4.1.1958.1.1.8.6.4.1.7
Available for release 3.30 and up. Object used to set shared secret key between the Ravlin and Radius Server. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the preshared key exists, then on read a dummy string is returned. shared secret key length is (0..32)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3LocalAuthTable 1.3.6.1.4.1.1958.1.1.8.6.5
Table to maintain the database of user name, password and static virtual IP Address and Mask.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3LocalAuthEntry

rc3LocalAuthEntry 1.3.6.1.4.1.1958.1.1.8.6.5.1
Entries in this table can be added and deleted.
OBJECT-TYPE    
  Rc3LocalAuthEntry  

rc3LocalAuthId 1.3.6.1.4.1.1958.1.1.8.6.5.1.1
A unique value for each entry.
OBJECT-TYPE    
  INTEGER  

rc3LocalAuthName 1.3.6.1.4.1.1958.1.1.8.6.5.1.2
User name, used to logon and get authenticated. When password is read it will return a NULL string.
OBJECT-TYPE    
  DisplayString Size(1..16)  

rc3LocalAuthPassword 1.3.6.1.4.1.1958.1.1.8.6.5.1.3
Password for the user, to authenticated with
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3LocalAuthIpAddr 1.3.6.1.4.1.1958.1.1.8.6.5.1.4
Static virtual IP address.
OBJECT-TYPE    
  IpAddress  

rc3LocalAuthIpMask 1.3.6.1.4.1.1958.1.1.8.6.5.1.5
Static virtual Mask
OBJECT-TYPE    
  IpAddress  

rc3LocalAuthRowStatus 1.3.6.1.4.1.1958.1.1.8.6.5.1.6
This object is used to create/delete rows from the IP Route Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3ImageSize 1.3.6.1.4.1.1958.1.1.8.7.1
Size of Image in bytes. SNMP manager must send this value before it can do a software download. On receipt of this object the AGENT will allocate the memory of rc3ImageSize, and start a 60 second timer. If the Agent does not receive the actual software block within the timeout period, it will assume the software download is aborted.
OBJECT-TYPE    
  INTEGER  

rc3SoftwareBlock 1.3.6.1.4.1.1958.1.1.8.7.2
A block of software image to be downloaded to the flash. AGENT uses a 60 second timer to timeout and abort software download, if no more block is received. On read the AGENT returns a zero length (NULL) string.
OBJECT-TYPE    
  OCTET STRING  

rc3SoftwareBlockNumber 1.3.6.1.4.1.1958.1.1.8.7.3
A sequential counter to keep track of the block number of the image that is sent by the SNMP Manager.
OBJECT-TYPE    
  INTEGER  

rc3RandomNumber 1.3.6.1.4.1.1958.1.1.8.8.1
A new Random number is used for every set hash computation. After the set operation is successful, the Ravlin changes the random number value, thus preventing replay.
OBJECT-TYPE    
  INTEGER  

rc3HashObject 1.3.6.1.4.1.1958.1.1.8.8.2
Image checksum/hash, after the last block of Image download is completed. On this indication the AGENT will do a checksum verification, and if correct will write the Image to the flash. If download Image checksum is incorrect then returns 'Gen Err'.
OBJECT-TYPE    
  OCTET STRING  

rc3UlaAuthenticationTimer 1.3.6.1.4.1.1958.1.1.8.8.3
The duration in minutes to re-authenticate a user for gateway access. Minimum is 30 minutes.
OBJECT-TYPE    
  INTEGER  

rc3UlaAuthenticationPort 1.3.6.1.4.1.1958.1.1.8.8.4
UDP port used for ULA authentication. By default the Ravlin will send to the RADIUS port 1812.
OBJECT-TYPE    
  INTEGER  

rc3SystemTime 1.3.6.1.4.1.1958.1.1.8.8.5
This object reads the current system time in GMT.
OBJECT-TYPE    
  INTEGER  

rc3CACertTable 1.3.6.1.4.1.1958.1.1.8.9.1
Table containing the CA certificates and public keys that can be used to verify User Certificate. The index value of 1 and 2 is reserved for RedCreek CA certificate that is manufactured into the box. Attempts to modify this entry will return generic error. A total of upto 6 CA certificates can be added.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3CACertEntry

rc3CACertEntry 1.3.6.1.4.1.1958.1.1.8.9.1.1
The entries in this table indicate that trust has been established for this root CA. Entries in the Policy Database will list an issuer name that is trusted, and the certificate for that issuer should reside in this table.
OBJECT-TYPE    
  Rc3CACertEntry  

rc3CACertIndex 1.3.6.1.4.1.1958.1.1.8.9.1.1.1
A unique identifier for this certificate in this table.
OBJECT-TYPE    
  INTEGER  

rc3CACertName 1.3.6.1.4.1.1958.1.1.8.9.1.1.2
Textual string used to identify a CA certificate.
OBJECT-TYPE    
  DisplayString Size(1..16)  

rc3CACertData 1.3.6.1.4.1.1958.1.1.8.9.1.1.3
The x509v3 DER encoded CA certificate.
OBJECT-TYPE    
  OCTET STRING  

rc3CACertStatus 1.3.6.1.4.1.1958.1.1.8.9.1.1.4
This object is used to create/delete rows from the CA Certificate Table. See the definition for RowStatus for a range of valid values used.
OBJECT-TYPE    
  RowStatus  

rc3UserCertTable 1.3.6.1.4.1.1958.1.1.8.9.2
Table containing the User certificates and public keys that can be used to identify this device to its peers. A public/private key pair will be generated for each entry as it is added to the table. The private keys are stored on the device, but are not readable via SNMP. The index value of 1 is reserved for the User certificate signed by RedCreek CA and is manufactured into the box. Attempts to modify that entry will cause an error.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3UserCertEntry

rc3UserCertEntry 1.3.6.1.4.1.1958.1.1.8.9.2.1
The entries in this table can be used as a cache for peer certificates. An attempt to verify the certificate is made when the entry is added to the table.
OBJECT-TYPE    
  Rc3UserCertEntry  

rc3UserCertIndex 1.3.6.1.4.1.1958.1.1.8.9.2.1.1
A unique identifier for this certificate in this table.
OBJECT-TYPE    
  INTEGER  

rc3UserCertName 1.3.6.1.4.1.1958.1.1.8.9.2.1.2
Textual string used to identify a User certificate.
OBJECT-TYPE    
  OCTET STRING  

rc3UserCertData 1.3.6.1.4.1.1958.1.1.8.9.2.1.3
The x509v3 DER encoded user certificate.
OBJECT-TYPE    
  OCTET STRING  

rc3UserCertStatus 1.3.6.1.4.1.1958.1.1.8.9.2.1.4
This object is used to create/delete rows from the User Certificate Table. See the definition for RowStatus for a range of valid values used.
OBJECT-TYPE    
  RowStatus  

rc3UserCertRDN 1.3.6.1.4.1.1958.1.1.8.9.3
User Certificate info. used to generate a PKCS10 info. This info. a public/private key pair.
OBJECT-TYPE    
  OCTET STRING  

rc3UserCertAlgoId 1.3.6.1.4.1.1958.1.1.8.9.4
Algorithm used to sign the hash.
OBJECT-TYPE    
  INTEGER  

rc3GenerateKeyPair 1.3.6.1.4.1.1958.1.1.8.9.5
If the two items above are set then is used to actually to start generating the key pair.
OBJECT-TYPE    
  INTEGER  

rc3UserCertGetPkcs10 1.3.6.1.4.1.1958.1.1.8.9.6
OBJECT-TYPE    
  OCTET STRING  

rc3IsakmpProposalTable 1.3.6.1.4.1.1958.1.1.9.1.1
This table contains a list of ISAKMP phase one proposals.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3IsakmpProposalEntry

rc3IsakmpProposalEntry 1.3.6.1.4.1.1958.1.1.9.1.1.1
An entry in the ISAKMP phase one proposal table.
OBJECT-TYPE    
  Rc3IsakmpProposalEntry  

rc3IsakmpProposalIndx 1.3.6.1.4.1.1958.1.1.9.1.1.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3IsakmpProposalEncryption 1.3.6.1.4.1.1958.1.1.9.1.1.1.2
The encryption type. Currently only des-cbc-56 and 3des-cbc and des-cbc-40 are supported.
OBJECT-TYPE    
  INTEGER des-cbc(1), triple-des-cbc(5), des-cbc-40(249)  

rc3IsakmpProposalHash 1.3.6.1.4.1.1958.1.1.9.1.1.1.3
The hash type. Currently md5 and sha are supported.
OBJECT-TYPE    
  INTEGER md5(1), sha(2)  

rc3IsakmpProposalAuthMode 1.3.6.1.4.1.1958.1.1.9.1.1.1.4
later
OBJECT-TYPE    
  INTEGER pre-sharedkey(1), dss-signature(2), rsa-signature(3), rsa-encryption(4)  

rc3IsakmpProposalDhGroup 1.3.6.1.4.1.1958.1.1.9.1.1.1.5
later
OBJECT-TYPE    
  INTEGER group1(1), group(2)  

rc3EspProposalTable 1.3.6.1.4.1.1958.1.1.9.1.2
This table contains a list of ESP proposals.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3EspProposalEntry

rc3EspProposalEntry 1.3.6.1.4.1.1958.1.1.9.1.2.1
An entry in the ESP proposal table.
OBJECT-TYPE    
  Rc3EspProposalEntry  

rc3EspProposalIndx 1.3.6.1.4.1.1958.1.1.9.1.2.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3EspProposalCipherAlgo 1.3.6.1.4.1.1958.1.1.9.1.2.1.2
later
OBJECT-TYPE    
  INTEGER esp-null(0), esp-des(2), esp-3des(3), esp-40des(249)  

rc3EspProposalEncapsulation 1.3.6.1.4.1.1958.1.1.9.1.2.1.3
later
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

rc3EspProposalAuth 1.3.6.1.4.1.1958.1.1.9.1.2.1.4
later
OBJECT-TYPE    
  INTEGER no-auth(0), hmac-md5(1), hmac-sha-1(2), des-mac(3)  

rc3EspProposalGroup 1.3.6.1.4.1.1958.1.1.9.1.2.1.5
later
OBJECT-TYPE    
  INTEGER group1(1), group(2)  

rc3AhProposalTable 1.3.6.1.4.1.1958.1.1.9.1.3
This table contains a list of AH proposals.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3AhProposalEntry

rc3AhProposalEntry 1.3.6.1.4.1.1958.1.1.9.1.3.1
An entry in the AH proposal table.
OBJECT-TYPE    
  Rc3AhProposalEntry  

rc3AhProposalIndx 1.3.6.1.4.1.1958.1.1.9.1.3.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3AhProposalAuth 1.3.6.1.4.1.1958.1.1.9.1.3.1.2
later
OBJECT-TYPE    
  INTEGER reserved(1), ah-md5(2), ah-sha(3)  

rc3AhProposalEncapsulation 1.3.6.1.4.1.1958.1.1.9.1.3.1.3
later
OBJECT-TYPE    
  INTEGER tunnel(1), transport(2)  

rc3AhProposalGroup 1.3.6.1.4.1.1958.1.1.9.1.3.1.4
later
OBJECT-TYPE    
  INTEGER group1(1), group(2)  

rc3EipProposalTable 1.3.6.1.4.1.1958.1.1.9.1.4
This table contains a list of EIP proposals.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3EipProposalEntry

rc3EipProposalEntry 1.3.6.1.4.1.1958.1.1.9.1.4.1
An entry in the EIP proposal table.
OBJECT-TYPE    
  Rc3EipProposalEntry  

rc3EipProposalIndx 1.3.6.1.4.1.1958.1.1.9.1.4.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3EipProposalCipherAlgo 1.3.6.1.4.1.1958.1.1.9.1.4.1.2
later
OBJECT-TYPE    
  INTEGER eip-des(2), eip-3des(3), eip-40des(249)  

rc3PdePeerInfoTable 1.3.6.1.4.1.1958.1.1.9.2.1
This table contains info. about the remote unit. Remote unit type determines the attributes that are required to be configured. Entries in this table can be added or deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdePeerInfoEntry

rc3PdePeerInfoEntry 1.3.6.1.4.1.1958.1.1.9.2.1.1
A Remote unit info entry containing objects to identify remote unit type, DN, Key Mgmt method used, IPSEC protocol to be negotiated, and Next Hop if there is a need to OVERRIDE the routing table.
OBJECT-TYPE    
  Rc3PdePeerInfoEntry  

rc3PdePeerIndx 1.3.6.1.4.1.1958.1.1.9.2.1.1.1
A unique numeric ID value for each Pde. This value is used to index into the table.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerType 1.3.6.1.4.1.1958.1.1.9.2.1.1.2
The semantics for the different remote unit type is host - need to specify DN, KeyMgmt, and IpsecProtocol (Addr optional) gateway - need to specify DN, KeyMgmt, and IpsecProtocol (Addr optional) bypassboth - need to specify nothing else in this table bypassoutbound - need to specify nothing else in this table
OBJECT-TYPE    
  INTEGER host(1), gateway(2), bypassboth(3), bypassoutbound(4)  

rc3PdePeerAddr 1.3.6.1.4.1.1958.1.1.9.2.1.1.3
IP Address of the remote Ravlin unit. This is used for hosts and gateways that have static IP addresses. A value of 0.0.0.0 indicates that the peer is has a dynamic IP address.
OBJECT-TYPE    
  IpAddress  

rc3PdePeerDN 1.3.6.1.4.1.1958.1.1.9.2.1.1.4
The Distinguished Name of the peer. Can be a Security ID (SID), DER encoded DN, or a DN filter.
OBJECT-TYPE    
  OCTET STRING  

rc3PdePeerIssuerDN 1.3.6.1.4.1.1958.1.1.9.2.1.1.5
The Distinguished Name of the issuer that signed the peer's certificate. If the SID is being used, then the issuer DN should be null.
OBJECT-TYPE    
  OCTET STRING  

rc3PdePeerLocalCertIndx 1.3.6.1.4.1.1958.1.1.9.2.1.1.6
This index corresponds to an entry in the local certificate table, which will determine which local certificate will be used to identify this device to the peer device.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerKeyMgmtType 1.3.6.1.4.1.1958.1.1.9.2.1.1.7
manual - use manual method to derive session keys. isakmp - use IETF protocol ISAKMP to derive session keys.
OBJECT-TYPE    
  INTEGER manual(1), isakmp(2)  

rc3PdePeerKeyMgmtIndx 1.3.6.1.4.1.1958.1.1.9.2.1.1.8
This index corresponds to an entry in either the rc3PdeManualKeyMgmtTable, or an entry in the rc3PdeIsakmpKeyMgmtTable depending on the value of rc3PdePeerKeyMgmtType.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerIpsecProtocolIndx 1.3.6.1.4.1.1958.1.1.9.2.1.1.9
This index corresponds to an entry in the rc3PdeIpsecProtocolTable, use a value of zero for eip.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerIfIndex 1.3.6.1.4.1.1958.1.1.9.2.1.1.10
This indicates the interface to use in order to deliver the packet to the Remote unit. If none is specified, then the routing table will be used to determine the next hop.
OBJECT-TYPE    
  INTEGER none(1), remote(3)  

rc3PdePeerNextHop 1.3.6.1.4.1.1958.1.1.9.2.1.1.11
If non-zero, then this represents the next hop IP Address used by this Pde. If this value is zero, then use the next hop from the Routing table.
OBJECT-TYPE    
  IpAddress  

rc3PdePeerContinue 1.3.6.1.4.1.1958.1.1.9.2.1.1.12
Allow the packet to continue the Pde selection process when rc3StatConnStatus is failed or dropped.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rc3PdePeerIsakmpLifeType 1.3.6.1.4.1.1958.1.1.9.2.1.1.13
The type of key lifetime for ISAKMP phase one.
OBJECT-TYPE    
  INTEGER seconds(1)  

rc3PdePeerIsakmpLifeTimeSeconds 1.3.6.1.4.1.1958.1.1.9.2.1.1.14
The lifetime in seconds for ISAKMP phase one.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerIsakmpLifeTimeKiloBytes 1.3.6.1.4.1.1958.1.1.9.2.1.1.15
The lifetime in kilobytes for ISAKMP phase one.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerIpsecLifeType 1.3.6.1.4.1.1958.1.1.9.2.1.1.16
The type of key lifetime for IPsec.
OBJECT-TYPE    
  INTEGER seconds(1)  

rc3PdePeerIpsecLifeTimeSeconds 1.3.6.1.4.1.1958.1.1.9.2.1.1.17
The lifetime in seconds for IPsec.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerIpsecLifeTimeKiloBytes 1.3.6.1.4.1.1958.1.1.9.2.1.1.18
The lifetime in kilobytes for IPsec.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerRowStatus 1.3.6.1.4.1.1958.1.1.9.2.1.1.19
This object is used to create/delete rows from the Policy Database Entry Peer Info Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeFilterProtocol 1.3.6.1.4.1.1958.1.1.9.2.1.1.20
Value specifying an associated IP protocol ID (e.g UDP/TCP). A value of zero means that the protocol ID field should be ignored.
OBJECT-TYPE    
  INTEGER  

rc3PdeLocalPort 1.3.6.1.4.1.1958.1.1.9.2.1.1.21
Value specifying an associated port. A value of zero means that the port field should be ignored.
OBJECT-TYPE    
  INTEGER  

rc3PdeRemotePort 1.3.6.1.4.1.1958.1.1.9.2.1.1.22
Value specifying an associated port. A value of zero means that the port field should be ignored.
OBJECT-TYPE    
  INTEGER  

rc3PdeName 1.3.6.1.4.1.1958.1.1.9.2.1.1.23
Name used to uniquely identify a PDE. Ravlin firmware will assign a unique Default pdeName value for each PDE inserted, and can be changed.
OBJECT-TYPE    
  DisplayString Size(1..15)  

rc3PdeULA 1.3.6.1.4.1.1958.1.1.9.2.1.1.24
If enabled for a gateway PDE ONLY, then each user needs to be authenticated after SA is established. This bit has no meaning for any other type of PDE.
OBJECT-TYPE    
  INTEGER enable(1), disable(2)  

rc3PdePeerLocalInterfaceIpAddr 1.3.6.1.4.1.1958.1.1.9.2.1.1.25
Specifies remote ravlin's local IP Address. A value of 0 means that this PDE does not participate in polling.
OBJECT-TYPE    
  IpAddress  

rc3PdeLocalNetworkTable 1.3.6.1.4.1.1958.1.1.9.2.2
This table provides the selector list containing 1..n entry pair(s) of network number and mask for the local interface. Entries in this table can be added or deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeLocalNetworkEntry

rc3PdeLocalNetworkEntry 1.3.6.1.4.1.1958.1.1.9.2.2.1
An entry in the Local Network Selector Table. Rows are created by an SNMP SET request seeting the value of rc3PdeLocalNetworkRowStatus to 'createAndGo' or 'createAndWait'. Rows are deleted by an SNMP SET request setting the value of rc3PdeLocalNetworkRowStatus to 'destroy'.
OBJECT-TYPE    
  Rc3PdeLocalNetworkEntry  

rc3PdeLocalNetworkNumber 1.3.6.1.4.1.1958.1.1.9.2.2.1.1
The local network address that will be used to match packets for this entry in the Policy Database.
OBJECT-TYPE    
  IpAddress  

rc3PdeLocalNetworkMask 1.3.6.1.4.1.1958.1.1.9.2.2.1.2
The local network mask that will be used to match packets for this entry in the Policy Database.
OBJECT-TYPE    
  IpAddress  

rc3PdeLocalNetworkRowStatus 1.3.6.1.4.1.1958.1.1.9.2.2.1.3
This object is used to create/delete rows from the Policy Database Entry Local Network Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeRemoteNetworkTable 1.3.6.1.4.1.1958.1.1.9.2.3
This table provides the selector list containing 1..n entry pair(s) of network number and mask for the Remote interface.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeRemoteNetworkEntry

rc3PdeRemoteNetworkEntry 1.3.6.1.4.1.1958.1.1.9.2.3.1
An entry in the Remote Network Selector Table. Rows are created by an SNMP SET request seeting the value of rc3PdeRemoteNetworkRowStatus to createAndGo or createAndWait. Rows are deleted by an SNMP SET request setting the value of rc3PdeRemoteNetworkRowStatus to destroy.
OBJECT-TYPE    
  Rc3PdeRemoteNetworkEntry  

rc3PdeRemoteNetworkNumber 1.3.6.1.4.1.1958.1.1.9.2.3.1.1
The remote network address that will be used to match packets for this entry in the Policy Database.
OBJECT-TYPE    
  IpAddress  

rc3PdeRemoteNetworkMask 1.3.6.1.4.1.1958.1.1.9.2.3.1.2
The remote network mask that will be used to match packets for this entry in the Policy Database.
OBJECT-TYPE    
  IpAddress  

rc3PdeRemoteNetworkRowStatus 1.3.6.1.4.1.1958.1.1.9.2.3.1.3
This object is used to create/delete rows from the Policy Database Entry Remote Network Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3SAStatTable 1.3.6.1.4.1.1958.1.1.9.2.4
This table provides statistics for each Security Association(Pde).
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3SAStatEntry

rc3SAStatEntry 1.3.6.1.4.1.1958.1.1.9.2.4.1
Entries in table cannot be added or deleted. This table is completely controlled by the agent. Each Pde statistics will be represented by an entry in this table.
OBJECT-TYPE    
  Rc3SAStatEntry  

rc3SAStatPeerAddr 1.3.6.1.4.1.1958.1.1.9.2.4.1.1
Second index into the stat table. Currently since multiple clients share the policy database entry, this allows stat from all clients sharing this database entry.
OBJECT-TYPE    
  IpAddress  

rc3SAStatConnStatus 1.3.6.1.4.1.1958.1.1.9.2.4.1.2
Values 1..4 are controlled by the agent. ONLY value 5, 6, is a read-write value from the manager. Value 5, will block all traffic and 6, will initiate ISAKMP with the remote when it receives the next IP packet that matches the selector.
OBJECT-TYPE    
  INTEGER inactive(1), active(2), pending(3), failed(4), block(5), rebuild(6)  

rc3SAStatCreateTime 1.3.6.1.4.1.1958.1.1.9.2.4.1.3
Time this Pde was actually established.
OBJECT-TYPE    
  INTEGER  

rc3SAStatEncryptPktCount 1.3.6.1.4.1.1958.1.1.9.2.4.1.4
Total encrypted packet count for this Pde, identified by Pde indx.
OBJECT-TYPE    
  Counter  

rc3SAStatEncryptByteCount 1.3.6.1.4.1.1958.1.1.9.2.4.1.5
Total encrypted byte count for this Pde, identified by Pde indx.
OBJECT-TYPE    
  Counter  

rc3SAStatDecryptPktCount 1.3.6.1.4.1.1958.1.1.9.2.4.1.6
Total decrypted packet count for this Pde, identified by Pde indx.
OBJECT-TYPE    
  Counter  

rc3SAStatDecryptByteCount 1.3.6.1.4.1.1958.1.1.9.2.4.1.7
Total decrypted byte count for this Pde, identified by Pde indx.
OBJECT-TYPE    
  Counter  

rc3SAStatFragPktCount 1.3.6.1.4.1.1958.1.1.9.2.4.1.8
later
OBJECT-TYPE    
  Counter  

rc3SAStatReset 1.3.6.1.4.1.1958.1.1.9.2.4.1.9
SNMP GET/GET NEXT for this object will return value other. SNMP SET request of reset will clear the stat values for row index by rc3PdePeerIndx, and rc3SAStatPeerAddr.
OBJECT-TYPE    
  INTEGER other(1), reset(2)  

rc3SAStatUserName 1.3.6.1.4.1.1958.1.1.9.2.4.1.10
User name used for RADIUS authentication.
OBJECT-TYPE    
  DisplayString  

rc3SAStatPollsSent 1.3.6.1.4.1.1958.1.1.9.2.4.1.11
The number of ICMP polling packets sent through this PDE's tunnel.
OBJECT-TYPE    
  Counter  

rc3SAStatPollsReceived 1.3.6.1.4.1.1958.1.1.9.2.4.1.12
The number of ICMP polling packet responses recieved through this PDE's tunnel.
OBJECT-TYPE    
  Counter  

rc3SAStatPollsAverageTime 1.3.6.1.4.1.1958.1.1.9.2.4.1.13
The average round trip time on milliseconds of all polling packets.
OBJECT-TYPE    
  INTEGER  

rc3SAStatPollsMaxTime 1.3.6.1.4.1.1958.1.1.9.2.4.1.14
The maximum round trip time on milliseconds for a ICMP polling packet.
OBJECT-TYPE    
  INTEGER  

rc3SAStatPollsMinTime 1.3.6.1.4.1.1958.1.1.9.2.4.1.15
The minimum round trip time on milliseconds for a ICMP polling packet.
OBJECT-TYPE    
  INTEGER  

rc3PdeManualKeyMgmtTable 1.3.6.1.4.1.1958.1.1.9.2.5
Table contains all the required parameters if manual keying method is used to establish an Pde. Entries in this table can be added or deleted. The initial release will allow only one entry (rc3PdeManualIndx = 1).
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeManualKeyMgmtEntry

rc3PdeManualKeyMgmtEntry 1.3.6.1.4.1.1958.1.1.9.2.5.1
Row Entry for Manual Key Mgmt Table.
OBJECT-TYPE    
  Rc3PdeManualKeyMgmtEntry  

rc3PdeManualKeyMgmtIndx 1.3.6.1.4.1.1958.1.1.9.2.5.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3PdeManualInboundEncryptKey 1.3.6.1.4.1.1958.1.1.9.2.5.1.2
later
OBJECT-TYPE    
  OCTET STRING  

rc3PdeManualOutboundEncryptKey 1.3.6.1.4.1.1958.1.1.9.2.5.1.3
later
OBJECT-TYPE    
  OCTET STRING  

rc3PdeManualInboundAuthKey 1.3.6.1.4.1.1958.1.1.9.2.5.1.4
later
OBJECT-TYPE    
  OCTET STRING  

rc3PdeManualOutboundAuthKey 1.3.6.1.4.1.1958.1.1.9.2.5.1.5
later
OBJECT-TYPE    
  OCTET STRING  

rc3PdeManualInboundSpi 1.3.6.1.4.1.1958.1.1.9.2.5.1.6
later
OBJECT-TYPE    
  INTEGER  

rc3PdeManualOutboundSpi 1.3.6.1.4.1.1958.1.1.9.2.5.1.7
later
OBJECT-TYPE    
  INTEGER  

rc3PdeManualKeyMgmtRowStatus 1.3.6.1.4.1.1958.1.1.9.2.5.1.8
This object is used to create/delete rows from the Policy Database Entry Manual Key Management Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeManualInboundEncryptKeyFips 1.3.6.1.4.1.1958.1.1.9.2.5.1.9
Available for release 3.30 and up. Object used to set manual inbound encryption key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual inbound encryption key exists, then on read a dummy string is returned. manual inbound encryption key length is (0..24)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3PdeManualOutboundEncryptKeyFips 1.3.6.1.4.1.1958.1.1.9.2.5.1.10
Available for release 3.30 and up. Object used to set manual outbound encryption key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual outbound encryption key exists, then on read a dummy string is returned. manual outbound encryption key length is (0..24)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3PdeManualInboundAuthKeyFips 1.3.6.1.4.1.1958.1.1.9.2.5.1.11
Available for release 3.30 and up. Object used to set manual inbound authentication key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual inbound authentication key exists, then on read a dummy string is returned. manual inbound authentication key length is (0..20)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3PdeManualOutboundAuthKeyFips 1.3.6.1.4.1.1958.1.1.9.2.5.1.12
Available for release 3.30 and up. Object used to set manual inbound authentication key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the manual inbound authentication key exists, then on read a dummy string is returned. manual outbound authentication key length is (0..20)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3PdeIsakmpKeyMgmtTable 1.3.6.1.4.1.1958.1.1.9.2.6
Table contains all the required parameters if ISAKMP keying method is used to establish a Security Association for a Policy Database Entry. The rc3PdeIsakmpIndx value is referenced by the rc3PdePeerKeyMgmtIndx value in the rc3PdePeerInfoTable. Entries in this table can be added or deleted.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeIsakmpKeyMgmtEntry

rc3PdeIsakmpKeyMgmtEntry 1.3.6.1.4.1.1958.1.1.9.2.6.1
An entry in the ISAKMP Key Management Table.
OBJECT-TYPE    
  Rc3PdeIsakmpKeyMgmtEntry  

rc3PdeIsakmpIndx 1.3.6.1.4.1.1958.1.1.9.2.6.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3PdeIsakmpProposals 1.3.6.1.4.1.1958.1.1.9.2.6.1.2
Each byte in the octet string will specify (in order of preference) the index into the ISAKMP proposal table (rc3IsakmpProposalTable). Up to eight proposals can be entered. These values are used when negotiating the ISAKMP phase one session.
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

rc3PdeIsakmpRetries 1.3.6.1.4.1.1958.1.1.9.2.6.1.3
later
OBJECT-TYPE    
  INTEGER  

rc3PdeIsakmpAuthPresharedKey 1.3.6.1.4.1.1958.1.1.9.2.6.1.4
later
OBJECT-TYPE    
  OCTET STRING  

rc3PdeIsakmpPfs 1.3.6.1.4.1.1958.1.1.9.2.6.1.5
later
OBJECT-TYPE    
  INTEGER  

rc3PdeIsakmpRowStatus 1.3.6.1.4.1.1958.1.1.9.2.6.1.6
This object is used to create/delete rows from the Policy Database Entry ISAKMP Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeIsakmpAuthPresharedKeyFips 1.3.6.1.4.1.1958.1.1.9.2.6.1.7
Available for release 3.30 and up. Object used to set preshared Authentication key. Refer to the textual convention of PbeShaEncryptedObject, for the process used to set this object. If the preshared key exists, then on read a dummy string is returned. Preshared key length is (0..32)
OBJECT-TYPE    
  PbeShaEncryptedObject  

rc3PdeIpsecProtocolTable 1.3.6.1.4.1.1958.1.1.9.2.7
This table contains sets of IPsec proposals for use when negotiating ESP, AH, or mixed mode Security Associations. The rc3PdeIpsecProtocolIndx value is referenced by the rc3PdePeerIpsecProtocolIndx value in the rc3PdePeerInfoTable.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeIpsecProtocolEntry

rc3PdeIpsecProtocolEntry 1.3.6.1.4.1.1958.1.1.9.2.7.1
later
OBJECT-TYPE    
  Rc3PdeIpsecProtocolEntry  

rc3PdeIpsecProtocolIndx 1.3.6.1.4.1.1958.1.1.9.2.7.1.1
This value is used as a unique identifier for entries in this table.
OBJECT-TYPE    
  INTEGER  

rc3PdeIpsecProtocolType 1.3.6.1.4.1.1958.1.1.9.2.7.1.2
Indicates the protocol type that the list of Proposals refer to.
OBJECT-TYPE    
  INTEGER ah(1), esp(2), mixed(3), proprietaryeip(4)  

rc3PdeIpsecProposals 1.3.6.1.4.1.1958.1.1.9.2.7.1.3
Each byte in the octet string will specify (in order of preference) the index into the ESP or AH proposal table (rc3EspProposalTable or rc3AhProposalTable). Up to eight proposals can be entered. If mixed mode is used, then the first four bytes will specify ESP proposals, and the last four bytes will specify AH proposals. These values are used when negotiating the IPsec session.
OBJECT-TYPE    
  OCTET STRING Size(1..8)  

rc3PdeIpsecProtocolRowStatus 1.3.6.1.4.1.1958.1.1.9.2.7.1.4
This object is used to create/delete rows from the Policy Database Entry IPsec Protocol Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeSelectProtocolTable 1.3.6.1.4.1.1958.1.1.9.2.8
This table contains a set of filters for each entry in the Policy Database. If one or more filters exist for a given policy entry, then those filters will be check after a packet has matched the local and remote network selectors. The filters can specify whether to block the packet, pass it in the clear, or use the action specified in the policy entry.
OBJECT-TYPE    
  SEQUENCE OF  
    Rc3PdeSelectProtocolTableEntry

rc3PdeSelectProtocolTableEntry 1.3.6.1.4.1.1958.1.1.9.2.8.1
The table index includes the index from the corresponding policy database entry, as well as the protocol and port. All entries in this table that have the same rc3PdePeerIndx value will be used to determine the disposition of packets that match that policy entry.
OBJECT-TYPE    
  Rc3PdeSelectProtocolTableEntry  

rc3PdeSelectProtocol 1.3.6.1.4.1.1958.1.1.9.2.8.1.1
The IP protocol number.
OBJECT-TYPE    
  INTEGER  

rc3PdeSelectPort 1.3.6.1.4.1.1958.1.1.9.2.8.1.2
The TCP/UDP port number.
OBJECT-TYPE    
  INTEGER  

rc3PdeSelectAction 1.3.6.1.4.1.1958.1.1.9.2.8.1.3
This variable determines how the packet should be handled if it matches this selection entry. block - drop the packet pass - pass the packet in the clear operational - use the rc3PdePeerType value in the corresponding rc3PdePerrInfoTable to determine how to handle the packet
OBJECT-TYPE    
  INTEGER block(1), pass(2), operational(3)  

rc3PdeSelectRowStatus 1.3.6.1.4.1.1958.1.1.9.2.8.1.4
This object is used to create/delete rows from the Policy Database Entry Select Protocol Table. See the definition for RowStatus for a range of valid values used. On read status indicates ACTIVE.
OBJECT-TYPE    
  RowStatus  

rc3PdeCount 1.3.6.1.4.1.1958.1.1.9.3.1
The count of number of Pde(s) completely configured on the Ravlin unit.
OBJECT-TYPE    
  INTEGER  

rc3PdePeerPreference 1.3.6.1.4.1.1958.1.1.9.3.2
This indicates the searc3h order for the Pde list. The list is ordered in the ascending order; i.e Pde with the lowest preference value has the highest priority.
OBJECT-TYPE    
  OCTET STRING  

rc3PdeNextAvailableIndx 1.3.6.1.4.1.1958.1.1.9.3.3
The next available unique indx for the manager to create a instance of the PDE Peer Info. table entry.
OBJECT-TYPE    
  INTEGER