RBN-SYS-SECURITY-MIB

File: RBN-SYS-SECURITY-MIB.mib (8994 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC SNMPv2-CONF
HCNUM-TC RBN-TC RBN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Gauge32 Counter64 DateAndTime
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
CounterBasedGauge64 RbnUnsigned64 rbnModules

Defined Values

rbnSysSecurityMib 1.3.6.1.4.1.2352.5.54
This MIB module defines attributes and notifications related to system and network level security issues. All mib objects defined in the module are viewed within the context identified in the SNMP protocol (i.e. the community string in v1/v2c or the contextName in v3).
MODULE-IDENTITY    

rbnSysSecNotifications 1.3.6.1.4.1.2352.5.54.0
OBJECT IDENTIFIER    

rbnSysSecObjects 1.3.6.1.4.1.2352.5.54.1
OBJECT IDENTIFIER    

rbnSysSecConformance 1.3.6.1.4.1.2352.5.54.2
OBJECT IDENTIFIER    

rbnSysSecThresholdObjects 1.3.6.1.4.1.2352.5.54.1.1
OBJECT IDENTIFIER    

rbnSysSecNotifyEnable 1.3.6.1.4.1.2352.5.54.1.1.1
The bit mask to enable/disable notifications for crossing specific threshold.
Status: current Access: read-write
OBJECT-TYPE    
  BITS maliciousPkt(0)  

rbnMeasurementInterval 1.3.6.1.4.1.2352.5.54.1.1.2
Data is sampled at the start and end of a specified interval. The difference between the start and end values |end - start| is called the delta value. When setting the interval, care should be taken that the interval should be short enough that the sampled variable is very unlikely to increase or decrease by more than range of the variable.
Status: current Access: read-write
OBJECT-TYPE    
  Gauge32 1..3600  

rbnMaliciousPktsThresholdHi 1.3.6.1.4.1.2352.5.54.1.1.3
When the current sampling interval delta value of the malicious packets counter is greater than or equal to this threshold, and the delta value at the last sampling interval was less than this threshold, a single high threshold exceeded event will be generated. A single high threshold exceeded event will also be generated if the first sampling interval delta value of the malicious IP packets counter is greater than or equal to this threshold. After a high threshold exceeded event is generated, another such event will not be generated until the delta value falls below this threshold and reaches the rbnMaliciousPktsThresholdLow, generating a low threshold exceeded event. In other words there cannot be successive high threshold events without an intervening low threshold event.
Status: current Access: read-write
OBJECT-TYPE    
  RbnUnsigned64  

rbnMaliciousPktsThresholdLow 1.3.6.1.4.1.2352.5.54.1.1.4
When the current sampling interval delta value of the malicious packets counter is less than or equal to this threshold, and the delta value at the last sampling interval was greater than this threshold, a single low threshold exceeded event will be generated. In addition, a high threshold exceeded event must occur before a low threshold exceeded event can be generated.
Status: current Access: read-write
OBJECT-TYPE    
  RbnUnsigned64  

rbnSysSecStatsObjects 1.3.6.1.4.1.2352.5.54.1.2
OBJECT IDENTIFIER    

rbnMaliciousPktsCounter 1.3.6.1.4.1.2352.5.54.1.2.1
A count of all malicious pkts. This includes but is not limited to malformed IP packets, malformed layer 4 IP, packets filtered by ACLs for specific faults, IP packets identified as attempting to spoof a system, and IP packets which failed reassembly.
Status: current Access: read-only
OBJECT-TYPE    
  Counter64  

rbnMaliciousPktsDelta 1.3.6.1.4.1.2352.5.54.1.2.2
The delta value of rbnMaliciousPktsCounter at the most recently completed measurement interval.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  CounterBasedGauge64  

rbnSysSecNotifyObjects 1.3.6.1.4.1.2352.5.54.1.4
OBJECT IDENTIFIER    

rbnThresholdNotifyTime 1.3.6.1.4.1.2352.5.54.1.4.1
The DateAndTime of the notification.
Status: current Access: accessible-for-notify
OBJECT-TYPE    
  DateAndTime  

rbnMaliciousPktThresholdHiExceeded 1.3.6.1.4.1.2352.5.54.0.1
This notification signifies that one of the delta values is equal to or greater than the corresponding high threshold value. The specific delta value is the last object in the notification varbind list.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

rbnMaliciousPktThresholdLowExceeded 1.3.6.1.4.1.2352.5.54.0.2
This notification signifies that one of the delta values is less than or equal to the corresponding low threshold value. The specific delta value is the last object in the notification varbind list.
Status: current Access: accessible-for-notify
NOTIFICATION-TYPE    

rbnSysSecCompliances 1.3.6.1.4.1.2352.5.54.2.1
OBJECT IDENTIFIER    

rbnSysSecGroups 1.3.6.1.4.1.2352.5.54.2.2
OBJECT IDENTIFIER    

rbnMaliciousPktGroup 1.3.6.1.4.1.2352.5.54.2.2.1
Set of objects for the group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

rbnSysSecNotifyObjectsGroup 1.3.6.1.4.1.2352.5.54.2.2.4
Set of objects for the group.
Status: current Access: accessible-for-notify
OBJECT-GROUP    

rbnSysSecNotificationGroup 1.3.6.1.4.1.2352.5.54.2.2.5
Set of notifications for the group.
Status: current Access: accessible-for-notify
NOTIFICATION-GROUP    

rbnSysSecCompliance 1.3.6.1.4.1.2352.5.54.2.1.1
The compliance statement for support of this mib module.
Status: current Access: read-only
MODULE-COMPLIANCE