RBN-MPLS-L3VPN-STD-EXT-MIB

File: RBN-MPLS-L3VPN-STD-EXT-MIB.mib (5805 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMP-FRAMEWORK-MIB
MPLS-L3VPN-STD-MIB IANA-ADDRESS-FAMILY-NUMBERS-MIB RBN-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE Unsigned32
MODULE-COMPLIANCE OBJECT-GROUP SnmpAdminString
mplsL3VpnVrfName MplsL3VpnRtType MplsL3VpnRouteDistinguisher
AddressFamilyNumbers rbnMgmt

Defined Types

RbnMplsL3VpnVrfRTEntry  
SEQUENCE    
  rbnMplsL3VpnVrfRTAddrFamily AddressFamilyNumbers
  rbnMplsL3VpnVrfRTType MplsL3VpnRtType
  rbnMplsL3VpnVrfRTIndex Unsigned32
  rbnMplsL3VpnVrfRT MplsL3VpnRouteDistinguisher
  rbnMplsL3VpnVrfRTDescr SnmpAdminString

Defined Values

rbnMplsL3VpnMIB 1.3.6.1.4.1.2352.2.51
This MIB contains managed object definitions for the Layer-3 Multiprotocol Label Switching Virtual Private Networks. This version of this MIB module extends RFC4382.
MODULE-IDENTITY    

rbnMplsL3VpnObjects 1.3.6.1.4.1.2352.2.51.1
OBJECT IDENTIFIER    

rbnMplsL3VpnConf 1.3.6.1.4.1.2352.2.51.1.1
OBJECT IDENTIFIER    

rbnMplsL3VpnConformance 1.3.6.1.4.1.2352.2.51.2
OBJECT IDENTIFIER    

rbnMplsL3VpnVrfRTTable 1.3.6.1.4.1.2352.2.51.1.1.1
This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN. rbnMplsL3VpnVrfRTTable is equivalent to mplsL3VpnVrfRTTable except for lexicographical ordering.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    RbnMplsL3VpnVrfRTEntry

rbnMplsL3VpnVrfRTEntry 1.3.6.1.4.1.2352.2.51.1.1.1.1
An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. The indexing provides an ordering per-VRF instance. See [RFC4364] for a complete definition of a route target.
Status: current Access: not-accessible
OBJECT-TYPE    
  RbnMplsL3VpnVrfRTEntry  

rbnMplsL3VpnVrfRTAddrFamily 1.3.6.1.4.1.2352.2.51.1.1.1.1.1
The address family in which the route target is declared.
Status: current Access: not-accessible
OBJECT-TYPE    
  AddressFamilyNumbers  

rbnMplsL3VpnVrfRTType 1.3.6.1.4.1.2352.2.51.1.1.1.1.2
The route target distribution type.
Status: current Access: not-accessible
OBJECT-TYPE    
  MplsL3VpnRtType  

rbnMplsL3VpnVrfRTIndex 1.3.6.1.4.1.2352.2.51.1.1.1.1.3
Auxiliary index for route targets configured for a particular VRF.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

rbnMplsL3VpnVrfRT 1.3.6.1.4.1.2352.2.51.1.1.1.1.4
The route target distribution policy.
Status: current Access: read-only
OBJECT-TYPE    
  MplsL3VpnRouteDistinguisher  

rbnMplsL3VpnVrfRTDescr 1.3.6.1.4.1.2352.2.51.1.1.1.1.5
Description of the route target.
Status: current Access: read-only
OBJECT-TYPE    
  SnmpAdminString  

rbnMplsL3VpnGroups 1.3.6.1.4.1.2352.2.51.2.1
OBJECT IDENTIFIER    

rbnMplsL3VpnCompliances 1.3.6.1.4.1.2352.2.51.2.2
OBJECT IDENTIFIER    

rbnMplsL3VpnModuleCompliance 1.3.6.1.4.1.2352.2.51.2.2.1
Compliance statement for agents that provide support for the RBN-MPLS-L3VPN-STD-EXT-MIB
Status: current Access: read-only
MODULE-COMPLIANCE    

rbnMplsL3VpnGroup 1.3.6.1.4.1.2352.2.51.2.1.1
Collection of scalar objects required for MPLS VPN management.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor