RADLAN-ETS-MIB

File: RADLAN-ETS-MIB.mib (5446 bytes)

Imported modules

SNMPv2-SMI	IF-MIB	SNMPv2-TC
Q-BRIDGE-MIB	RADLAN-MIB

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	Counter32
Gauge32	Unsigned32	IpAddress
TimeTicks	InterfaceIndexOrZero	InterfaceIndex
TruthValue	RowStatus	RowPointer
TEXTUAL-CONVENTION	DisplayString	Counter64
PortList	Percents	rnd

Defined Types

EtsPriorityGroupType
Priority group enumerator.
TEXTUAL-CONVENTION
	INTEGER	priorityGroup0(0), priorityGroup1(1), priorityGroup2(2), priorityGroup3(3), priorityGroup4(4), priorityGroup5(5), priorityGroup6(6), priorityGroup7(7), priorityGroup15(15)

EtsAdminStatusReasonType
Administarative reason enumerator.
TEXTUAL-CONVENTION
	INTEGER	ok(1), too-many-groups(2), too-many-queues(3), not-highest-queue(4)

RlEtsPriorityGroupMappingEntry
SEQUENCE
	rlEtsPriorityGroupMapping8021QPrio	INTEGER
	rlEtsPriorityGroupMappingAdminPG	EtsPriorityGroupType
	rlEtsPriorityGroupMappingOperPG	EtsPriorityGroupType
	rlEtsPriorityGroupMappingStatus	RowStatus

Defined Values

rlEtsMib		1.3.6.1.4.1.89.201
Added: EtsPriorityGroupType rlEtsFeatureStatus rlEtsPriorityGroupMappingTable rlEtsPriorityGroupBwAllocTable.
MODULE-IDENTITY

rlEtsFeatureStatus		1.3.6.1.4.1.89.201.1
This scalar indicates ETS enable status.
Status: current	Access: read-write
OBJECT-TYPE
	TruthValue

rlEtsPriorityGroupMappingTable		1.3.6.1.4.1.89.201.2
This table describes Enhanced Transmission Selection Priority to Priority Group Mapping.
Status: current	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		RlEtsPriorityGroupMappingEntry

rlEtsPriorityGroupMappingEntry		1.3.6.1.4.1.89.201.2.1
Each entry in this table describes The priority to priority group mapping. The index is represented by rlEtsPriorityGroupMapping8021QPrio.
Status: current	Access: not-accessible
OBJECT-TYPE
	RlEtsPriorityGroupMappingEntry

rlEtsPriorityGroupMapping8021QPrio		1.3.6.1.4.1.89.201.2.1.1
802.1Q Priority.
Status: current	Access: not-accessible
OBJECT-TYPE
	INTEGER	0..7

rlEtsPriorityGroupMappingAdminPG		1.3.6.1.4.1.89.201.2.1.2
Administrative (desired) Priority group of this priority.
Status: current	Access: read-write
OBJECT-TYPE
	EtsPriorityGroupType

rlEtsPriorityGroupMappingOperPG		1.3.6.1.4.1.89.201.2.1.3
Operational (current) priority group of this priority.
Status: current	Access: read-only
OBJECT-TYPE
	EtsPriorityGroupType

rlEtsPriorityGroupMappingStatus		1.3.6.1.4.1.89.201.2.1.4
The status of a table entry. It is used to add/delete an entry from this table.
Status: current	Access: read-write
OBJECT-TYPE
	RowStatus

rlEtsPriorityGroupMappingProblemReason		1.3.6.1.4.1.89.201.3
Reason if priority to priority group, admin status is not equal to operational status.
Status: current	Access: read-only
OBJECT-TYPE
	EtsAdminStatusReasonType

rlEtsPriorityGroupMappingProblemIndex		1.3.6.1.4.1.89.201.4
Index of problematic PG if rlEtsPriorityGroupMappingProblemReason = too-many-queues(2) or index of problematic queue if rlEtsPriorityGroupMappingProblemReason = too-many-groups(1).
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER

rlEtsPriorityGroupBwAlloc		1.3.6.1.4.1.89.201.5
Enhanced Transmission Selection Priority Group Bandwidth Allocation identifier. Each pair of octets represent priority group with corresponding bandwidth
Status: current	Access: read-write
OBJECT-TYPE
	OCTET STRING	Size(16)

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor