POWERCONNECT3048-MIB
File:
POWERCONNECT3048-MIB.mib (41277 bytes)
Imported modules
Imported symbols
Defined Types
HostEntry |
|
SEQUENCE |
|
|
|
|
hostIndex |
INTEGER |
|
|
hostName |
DisplayString |
|
|
hostIP |
IpAddress |
|
|
hostComm |
DisplayString |
|
|
hostStatus |
INTEGER |
|
ConfigPortEntry |
|
SEQUENCE |
|
|
|
|
configPort |
INTEGER |
|
|
configPortDuplex |
INTEGER |
|
|
configPortRuntFilt |
INTEGER |
|
|
configPortSrcSecurity |
INTEGER |
|
|
configPortDataRate |
INTEGER |
|
|
configForwardingMode |
INTEGER |
|
|
configPortDuplexOper |
INTEGER |
|
|
configPortDataRateOper |
INTEGER |
|
|
configPortStateOper |
INTEGER |
|
|
configPortFlowControl |
INTEGER |
|
|
configPortDefaultVlanId |
INTEGER |
|
|
configPortComments |
DisplayString |
|
|
configPortAutoNegotiation |
INTEGER |
|
|
configPortHOLBlocking |
INTEGER |
|
|
configPortFlowControlOper |
INTEGER |
|
|
configPortGBIC |
INTEGER |
|
|
configPortFastLink |
INTEGER |
|
|
configPortPriority |
INTEGER |
|
ConfigDiffServEntry |
|
SEQUENCE |
|
|
|
|
configDiffServDSCP |
INTEGER |
|
|
configDiffServPriority |
INTEGER |
|
ConfigIpFilterEntry |
|
SEQUENCE |
|
|
|
|
configIpFilterIpAddress |
IpAddress |
|
|
configIpFilterStatus |
INTEGER |
|
VlanEntry |
|
SEQUENCE |
|
|
|
|
vlanId |
INTEGER |
|
|
vlanName |
DisplayString |
|
|
vlanStatus |
INTEGER |
|
VlanPortEntry |
|
SEQUENCE |
|
|
|
|
vlanPortPortId |
INTEGER |
|
|
vlanPortVlanId |
INTEGER |
|
|
vlanPortStatus |
INTEGER |
|
|
vlanPortTaggedMode |
INTEGER |
|
PortTrunkEntry |
|
SEQUENCE |
|
|
|
|
portTrunkId |
INTEGER |
|
|
portTrunkMember |
INTEGER |
|
|
portTrunkMemberValue |
INTEGER |
|
Defined Values
dell |
1.3.6.1.4.1.674 |
OBJECT IDENTIFIER |
|
|
|
dellLan |
1.3.6.1.4.1.674.10895 |
OBJECT IDENTIFIER |
|
|
|
commTable |
1.3.6.1.4.1.674.10895.5.1.1 |
A list of SNMP Community Entries |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
CommEntry |
|
commIndex |
1.3.6.1.4.1.674.10895.5.1.1.1.1 |
An index that uniquely identifies an entry in the
Community Table. Eight entries are currently supported. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..8 |
|
commName |
1.3.6.1.4.1.674.10895.5.1.1.1.2 |
The name of this SNMP Community Entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
commGet |
1.3.6.1.4.1.674.10895.5.1.1.1.3 |
The GET permission for the community. A (1) indicates a
GET enable. A (2) indicates a GET disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
commSet |
1.3.6.1.4.1.674.10895.5.1.1.1.4 |
The SET permission for the community. A (1) indicates a
SET enable. A (2) indicates a SET disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
commTrap |
1.3.6.1.4.1.674.10895.5.1.1.1.5 |
The TRAP permission for the community. A (1) indicates a
TRAP enable. A (2) indicates a TRAP disable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
commStatus |
1.3.6.1.4.1.674.10895.5.1.1.1.6 |
The RowStatus for the community entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..6 |
|
hostTable |
1.3.6.1.4.1.674.10895.5.2.1 |
A list of SNMP Trusted Host Entries |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HostEntry |
|
hostEntry |
1.3.6.1.4.1.674.10895.5.2.1.1 |
A list of SNMP Host properties |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HostEntry |
|
|
hostIndex |
1.3.6.1.4.1.674.10895.5.2.1.1.1 |
An index that uniquely identifies an entry in the
Host Table. Sixteen entries are currently supported. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..16 |
|
hostName |
1.3.6.1.4.1.674.10895.5.2.1.1.2 |
The name of this Host Entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
hostIP |
1.3.6.1.4.1.674.10895.5.2.1.1.3 |
The IP Address for the host. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
hostComm |
1.3.6.1.4.1.674.10895.5.2.1.1.4 |
The name of the community this host belongs to. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
hostStatus |
1.3.6.1.4.1.674.10895.5.2.1.1.5 |
The RowStatus for the community entry. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..6 |
|
hostAuthorization |
1.3.6.1.4.1.674.10895.5.2.2 |
If enabled, the host must be in the hostTable in order
to access the device via SNMP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
miscBaud |
1.3.6.1.4.1.674.10895.5.3.1 |
The Serial port BAUD Rate. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
miscReset |
1.3.6.1.4.1.674.10895.5.3.2 |
Physically resets the unit - use with care. A (1) resets
the unit, a (2) does nothing. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reset(1), noop(2) |
|
miscStatisticsReset |
1.3.6.1.4.1.674.10895.5.3.3 |
Resets the units statistics. A (1) resets
the unit, a (2) does nothing. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
reset(1), noop(2) |
|
miscSwitchOperState |
1.3.6.1.4.1.674.10895.5.3.4 |
Global operation state of the switch. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
other(1), unknown(2), ok(3), noncritical(4), critical(5), nonrecoverable(6) |
|
spanOnOff |
1.3.6.1.4.1.674.10895.5.4.1 |
Enable/Disable Spanning Tree. A (1) enables, a (2) disables. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configVerSwPrimary |
1.3.6.1.4.1.674.10895.5.11.1 |
The software image version string |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
configVerHwChipSet |
1.3.6.1.4.1.674.10895.5.11.2 |
The hardware chipset version string |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..31) |
|
configBootMode |
1.3.6.1.4.1.674.10895.5.11.3 |
Defines the method used for downloading the image when reset. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
flash(1), net(2) |
|
configBootFtpServerIp |
1.3.6.1.4.1.674.10895.5.11.4 |
The FTP server's IP address used for downloading the
boot image |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configPortTable |
1.3.6.1.4.1.674.10895.5.11.6 |
A list of interface entries used for enterprise specific
configuration. The number of entries is given by the value
of ifNumber. All interface entries are assumed to be
Ethernet interafaces. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ConfigPortEntry |
|
configPortEntry |
1.3.6.1.4.1.674.10895.5.11.6.1 |
An enterprise specific interface entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ConfigPortEntry |
|
|
configPort |
1.3.6.1.4.1.674.10895.5.11.6.1.1 |
A unique value for each interface that correlates to ifIndex.
Its value ranges between 1 and the value of ifNumber. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
configPortDuplex |
1.3.6.1.4.1.674.10895.5.11.6.1.3 |
The port's duplex desired state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
half-duplex(1), full-duplex(2) |
|
configPortRuntFilt |
1.3.6.1.4.1.674.10895.5.11.6.1.4 |
Defines whether the port will drop runt packets |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortSrcSecurity |
1.3.6.1.4.1.674.10895.5.11.6.1.5 |
The desired state for an interface's source security. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortDataRate |
1.3.6.1.4.1.674.10895.5.11.6.1.6 |
The port's desired transmission data rate. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rate10Meg(1), rate100Meg(2), rate1Gig(4) |
|
configForwardingMode |
1.3.6.1.4.1.674.10895.5.11.6.1.7 |
Indicates whether the packets will receive the entire
packet before forwarding. 'store-and-forward'
receives the entire packet before forwarding.
'cut-through' may forward the packet before the
entire packet is received. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
store-and-forward(1), cut-through(2) |
|
configPortDuplexOper |
1.3.6.1.4.1.674.10895.5.11.6.1.8 |
The port's duplex state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
half-duplex(1), full-duplex(2) |
|
configPortDataRateOper |
1.3.6.1.4.1.674.10895.5.11.6.1.9 |
The port's transmission data rate. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
rate10Meg(1), rate100Meg(2), rate1Gig(4) |
|
configPortStateOper |
1.3.6.1.4.1.674.10895.5.11.6.1.10 |
The port's current state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), blocking(2), listening(3), learning(4), forwarding(5) |
|
configPortFlowControl |
1.3.6.1.4.1.674.10895.5.11.6.1.11 |
The port will avoid transmitting a new packet
for the period of time specified in a received
PAUSE packet when enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortDefaultVlanId |
1.3.6.1.4.1.674.10895.5.11.6.1.12 |
The port will add this vlan id tag to any incoming packet
which is lacking a vlan id tag. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..4094 |
|
configPortAutoNegotiation |
1.3.6.1.4.1.674.10895.5.11.6.1.14 |
The port will perform auto-negotiation to determine the
port's duplex and data rate. When auto-negotiation is
enabled, the negotiated duplex and data rate can be
determined by configPortDuplexOper and
configPortDataRateOper mib objects respectively. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortHOLBlocking |
1.3.6.1.4.1.674.10895.5.11.6.1.15 |
When enabled, the port will prevent head-of-line blocking
from occuring. If the current port is to forward a packet
to a port which is beleived to be blocked, the packet will
be dropped instead of forwarded. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortFlowControlOper |
1.3.6.1.4.1.674.10895.5.11.6.1.16 |
The port's current flow control state. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configPortGBIC |
1.3.6.1.4.1.674.10895.5.11.6.1.17 |
Port Type. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
1..7 |
|
configPortFastLink |
1.3.6.1.4.1.674.10895.5.11.6.1.18 |
The port's FastLink option. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
disabled(1), enabled(2) |
|
configPortPriority |
1.3.6.1.4.1.674.10895.5.11.6.1.19 |
The port's current flow control state. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), high(2) |
|
configRmonOnOff |
1.3.6.1.4.1.674.10895.5.11.7 |
Enable or disable Remote Montioring, RMON. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configMirroringOnOff |
1.3.6.1.4.1.674.10895.5.11.8 |
Enable or disable port mirroring. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configMirrorSrc |
1.3.6.1.4.1.674.10895.5.11.9 |
When mirroring is enabled (configMirroringOnOff =
enabled), this identifies the mirroring source port.
This value has a valid range of 1 to ifNumber when enbaled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
configMirrorMon |
1.3.6.1.4.1.674.10895.5.11.10 |
When mirroring is enabled (configMirroringOnOff =
enabled), this identifies the mirroring monitoring
port. This value has a valid range of 1 to ifNumber when
enabled. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
configIpAssignmentMode |
1.3.6.1.4.1.674.10895.5.11.12 |
Indicates whether the device address is assigned by
the user (manual), BootP, or DHCP. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
manual(1), bootP(2), dhcp(3) |
|
configPhysAddress |
1.3.6.1.4.1.674.10895.5.11.13 |
The interface's address at the protocol layer
immediately 'below' the network layer in the
protocol stack. This is the physical address
for the end-station. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
MacAddress |
|
|
configIpAddress |
1.3.6.1.4.1.674.10895.5.11.16 |
The IP Address for the RDU box. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configNetMask |
1.3.6.1.4.1.674.10895.5.11.17 |
The network mask for the RDU box. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configGateway |
1.3.6.1.4.1.674.10895.5.11.18 |
The Gatway Address for the RDU box. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configSave |
1.3.6.1.4.1.674.10895.5.11.19 |
Physically saves the current configuration to nvram.
- use with care.
(1) saves the configuration
(2) does nothing. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
save(1), noop(2) |
|
configVerifyPassword |
1.3.6.1.4.1.674.10895.5.11.20 |
Verify the password is valid. If invalid a BAD_VALUE
error is returned. |
Status: mandatory |
Access: write-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..20) |
|
configRestoreDefaults |
1.3.6.1.4.1.674.10895.5.11.22 |
Restores the configuration of the unit to the
original settings. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
restore(1), noop(2) |
|
configIGMPOnOff |
1.3.6.1.4.1.674.10895.5.11.23 |
Enable or disable the IGMP protocol within the switch. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configWebOnOff |
1.3.6.1.4.1.674.10895.5.11.24 |
Enable or disable the Web Interface. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configHighPriorityOptimization |
1.3.6.1.4.1.674.10895.5.11.25 |
Enable or disable high priority optimization. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configDynamicAddressLearning |
1.3.6.1.4.1.674.10895.5.11.26 |
The ablility to learn dynamic addresses automatically.
With this parameter disabled, a new address detected on
a port will cause that port to be disabled, force a
configuration save, and issue a trap alerting
management stations of the intrusion. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configUserAuthenticationMode |
1.3.6.1.4.1.674.10895.5.11.27 |
Determines whether the user password will be authenticated
by the switch, a remote RADIUS server, or some combination
of the two. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
local(1), localThenRemote(2), remoteThenLocal(3), remote(4) |
|
configRadiusServerIpAddress |
1.3.6.1.4.1.674.10895.5.11.28 |
The IP Address of the RADIUS server used for remote
user authentication. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configRadiusSharedSecret |
1.3.6.1.4.1.674.10895.5.11.29 |
A string of characters used in the RADIUS password
encryption process. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..32) |
|
configTelnetConsole |
1.3.6.1.4.1.674.10895.5.11.30 |
Enable or disable the telnet console. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configDiffServEntry |
1.3.6.1.4.1.674.10895.5.11.31.1 |
An enterprise specific DSCP entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ConfigDiffServEntry |
|
|
configDiffServDSCP |
1.3.6.1.4.1.674.10895.5.11.31.1.1 |
A DSCP value. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
configDiffServPriority |
1.3.6.1.4.1.674.10895.5.11.31.1.2 |
The DSCP's current priority setting. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
normal(1), high(2) |
|
configTftpServerIpAddress |
1.3.6.1.4.1.674.10895.5.11.32 |
The IP Address of the tftp server used to upload and
download configuration files. This object is to be used
in conjunction with configTftpServerFileName and
configTftpOperation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configTftpServerFileName |
1.3.6.1.4.1.674.10895.5.11.33 |
The filename, including the path, used to store or
retrieve a configuration file from the tftp server.
This object is to be used in conjunction with
configTftpServerIpAddress and configTftpOperation. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..64) |
|
configTftpOperation |
1.3.6.1.4.1.674.10895.5.11.34 |
The tftp operation to perform. Either download a
configuration to the unit or upload the current
configuration to the tftp server. This object is
to be used in conjunction with
configTftpServerIpAddress and configTftpServerFileName. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
download(1), upload(2) |
|
configIpFilter |
1.3.6.1.4.1.674.10895.5.11.35 |
Determines if access to the device is limited to only
those IP addresses specified in the configIpFilterTable. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
enabled(1), disabled(2) |
|
configIpFilterEntry |
1.3.6.1.4.1.674.10895.5.11.36.1 |
An enterprise specific IP filter entry. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ConfigIpFilterEntry |
|
|
configIpFilterIpAddress |
1.3.6.1.4.1.674.10895.5.11.36.1.1 |
An IP address which is allowed access to this device. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
IpAddress |
|
|
configIpFilterStatus |
1.3.6.1.4.1.674.10895.5.11.36.1.2 |
The status of an entry in the IP filter Table. Only
a subset of the rowstatus variables (active, destroy)
are available. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), destroy(6) |
|
vlanTable |
1.3.6.1.4.1.674.10895.5.13.1 |
A list of the VLANs |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanEntry |
|
vlanEntry |
1.3.6.1.4.1.674.10895.5.13.1.1 |
A VLAN entry containing the VLAN id and name. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanEntry |
|
|
vlanId |
1.3.6.1.4.1.674.10895.5.13.1.1.1 |
The VLAN identifier. A maximum of 16 VLANs is supported.
The value must be from 0 to 4095. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vlanName |
1.3.6.1.4.1.674.10895.5.13.1.1.2 |
The VLAN name associated with the VLAN Id. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..15) |
|
vlanStatus |
1.3.6.1.4.1.674.10895.5.13.1.1.3 |
The status of an entry in the VLAN Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), createAndGo(4), destroy(6) |
|
vlanPortTable |
1.3.6.1.4.1.674.10895.5.13.2 |
A list of ports and their associated VLAN. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
VlanPortEntry |
|
vlanPortEntry |
1.3.6.1.4.1.674.10895.5.13.2.1 |
Information pertaining to an individual port regarding
to which VLAN it belongs. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
VlanPortEntry |
|
|
vlanPortPortId |
1.3.6.1.4.1.674.10895.5.13.2.1.1 |
A port identifier that is in the range of 1 to ifNumber. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vlanPortVlanId |
1.3.6.1.4.1.674.10895.5.13.2.1.2 |
The VLAN identifier. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
vlanPortStatus |
1.3.6.1.4.1.674.10895.5.13.2.1.3 |
The status of this port's association within this VLAN. Only
a subset of the rowstatus variables (active, createAndGo,
destroy) are available. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
active(1), createAndGo(4), destroy(6) |
|
vlanPortTaggedMode |
1.3.6.1.4.1.674.10895.5.13.2.1.4 |
The tagged mode of a VLAN port. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
untagged(1), tagged(2) |
|
portTrunkTable |
1.3.6.1.4.1.674.10895.5.14.1 |
A list of port trunks and their associated members. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
PortTrunkEntry |
|
portTrunkEntry |
1.3.6.1.4.1.674.10895.5.14.1.1 |
A port trunk entry containing the trunk id and trunk members. |
Status: mandatory |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
PortTrunkEntry |
|
|
portTrunkId |
1.3.6.1.4.1.674.10895.5.14.1.1.1 |
The port trunk identifier. The current range is from 1 to 4. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
portTrunkMember |
1.3.6.1.4.1.674.10895.5.14.1.1.2 |
A port trunk has four members. |
Status: mandatory |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
portTrunkMemberValue |
1.3.6.1.4.1.674.10895.5.14.1.1.3 |
A port trunk member value indicates which port is a
member of the specified trunk. Valid values are in the
range from 0 to ifNumber. A zero indicates that no port
is contained in the specifed member. |
Status: mandatory |
Access: read-write |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
addressIntrusion |
0 |
An addressIntrusion trap signifies that an
unauthorized address has been seen on the network. |
TRAP-TYPE |
|
|
|