OPTIX-SDH-ALM-MIB

File: OPTIX-SDH-ALM-MIB.mib (17083 bytes)

Imported modules

OPTIX-OID-MIB OPTIX-SDH-TC-MIB SNMPv2-CONF
SNMPv2-SMI SNMPv2-TC

Imported symbols

optixCommonSdh SdhAlarmEventType OBJECT-GROUP
MODULE-COMPLIANCE mgmt Gauge32
OBJECT-TYPE MODULE-IDENTITY DateAndTime

Defined Types

RowStatus  
INTEGER active(1), notInService(2), notReady(3), createAndGo(4), createAndWait(5), destroy(6)    

AlmAutoReportEntry  
SEQUENCE    
  almAutoRepBid Gauge32
  almAutoRepEid SdhAlarmEventType
  almAutoRep INTEGER

AlmSeverityEntry  
SEQUENCE    
  almSeverityBid Gauge32
  almSeverityEid SdhAlarmEventType
  almSeverity INTEGER

AlmMonStateEntry  
SEQUENCE    
  almMonStateBid Gauge32
  almMonStateEid SdhAlarmEventType
  almMonStatePort Gauge32
  almMonStatePath Gauge32
  almMonState INTEGER

AlmHisAlarmDataEntry  
SEQUENCE    
  almHisAlarmDataTableStatus RowStatus
  almHisAlarmDataPara OCTET STRING
  almHisAlarmDataEndTime DateAndTime
  almHisAlarmDataStartTime DateAndTime
  almHisAlarmDataState INTEGER
  almHisAlarmDataSeverity INTEGER
  almHisAlarmDataEid SdhAlarmEventType
  almHisAlarmDataBid Gauge32
  almHisAlarmDataNID Gauge32

AlmCurAlarmDataEntry  
SEQUENCE    
  almCurAlarmDataTableStatus RowStatus
  almCurAlarmDataPara OCTET STRING
  almCurAlarmDataEndTime DateAndTime
  almCurAlarmDataStartTime DateAndTime
  almCurAlarmDataState INTEGER
  almCurAlarmDataSeverity INTEGER
  almCurAlarmDataEid SdhAlarmEventType
  almCurAlarmDataBid Gauge32
  almCurAlarmDataNID Gauge32

Defined Values

optixAlarm 1.3.6.1.4.1.2011.2.25.3.10.30
This module MIB describes the Optix Alarm.
MODULE-IDENTITY    

almAttribute 1.3.6.1.4.1.2011.2.25.3.10.30.10
OBJECT IDENTIFIER    

almAutoReportTable 1.3.6.1.4.1.2011.2.25.3.10.30.10.10
Alarm auotmatic report status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlmAutoReportEntry

almAutoReportEntry 1.3.6.1.4.1.2011.2.25.3.10.30.10.10.1
Alarm auotmatic report status entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlmAutoReportEntry  

almAutoRepBid 1.3.6.1.4.1.2011.2.25.3.10.30.10.10.1.1
Card ID
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almAutoRepEid 1.3.6.1.4.1.2011.2.25.3.10.30.10.10.1.2
Alarm ID
Status: current Access: read-only
OBJECT-TYPE    
  SdhAlarmEventType  

almAutoRep 1.3.6.1.4.1.2011.2.25.3.10.30.10.10.1.3
Alarm auotmatic report status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

almSeverityTable 1.3.6.1.4.1.2011.2.25.3.10.30.10.20
Alarm severity table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlmSeverityEntry

almSeverityEntry 1.3.6.1.4.1.2011.2.25.3.10.30.10.20.1
Alarm severity table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlmSeverityEntry  

almSeverityBid 1.3.6.1.4.1.2011.2.25.3.10.30.10.20.1.1
Card ID
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almSeverityEid 1.3.6.1.4.1.2011.2.25.3.10.30.10.20.1.2
Alarm ID
Status: current Access: read-only
OBJECT-TYPE    
  SdhAlarmEventType  

almSeverity 1.3.6.1.4.1.2011.2.25.3.10.30.10.20.1.3
Alarm severity.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4)  

almMonStateTable 1.3.6.1.4.1.2011.2.25.3.10.30.10.30
Alarm monitor status table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlmMonStateEntry

almMonStateEntry 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1
Alarm monitor status entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlmMonStateEntry  

almMonStateBid 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1.1
Card ID
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almMonStateEid 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1.2
Alarm ID
Status: current Access: read-only
OBJECT-TYPE    
  SdhAlarmEventType  

almMonStatePort 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1.3
Optical port No.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almMonStatePath 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1.4
Path No.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almMonState 1.3.6.1.4.1.2011.2.25.3.10.30.10.30.1.5
Alarm monitor status.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

almData 1.3.6.1.4.1.2011.2.25.3.10.30.20
OBJECT IDENTIFIER    

almHisAlarmDataTable 1.3.6.1.4.1.2011.2.25.3.10.30.20.20
Historic alarm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlmHisAlarmDataEntry

almHisAlarmDataEntry 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1
Historic alarm Entry.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlmHisAlarmDataEntry  

almHisAlarmDataTableStatus 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.9
Indicate whether this row has been deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

almHisAlarmDataPara 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.8
Additional parameters,include optical port No,path No,etc.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(5)  

almHisAlarmDataEndTime 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.7
Date and time when alarm cleared,has following format: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

almHisAlarmDataStartTime 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.6
Date and time when alarm declared,has following format: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

almHisAlarmDataState 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.5
Alarm state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER almStart(1), almGo(2), almEnd(3)  

almHisAlarmDataSeverity 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.4
Alarm severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4)  

almHisAlarmDataEid 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.3
Alarm event ID.
Status: current Access: read-only
OBJECT-TYPE    
  SdhAlarmEventType  

almHisAlarmDataBid 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.2
Card ID.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almHisAlarmDataNID 1.3.6.1.4.1.2011.2.25.3.10.30.20.20.1.1
Number ID.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almCurAlarmDataTable 1.3.6.1.4.1.2011.2.25.3.10.30.20.10
Current alarm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    AlmCurAlarmDataEntry

almCurAlarmDataEntry 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1
Current alarm table.
Status: current Access: not-accessible
OBJECT-TYPE    
  AlmCurAlarmDataEntry  

almCurAlarmDataTableStatus 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.9
Indicate whether this row has been deleted.
Status: current Access: read-write
OBJECT-TYPE    
  RowStatus  

almCurAlarmDataPara 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.8
Additional parameters,include optical port No,path No,etc.
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(5)  

almCurAlarmDataEndTime 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.7
Date and time when alarm cleared,has following format: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

almCurAlarmDataStartTime 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.6
Date and time when alarm declared,has following format: field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) 7 8 deci-second 0..9 8 9 direction from UTC '+' / '-' 9 10 hours from UTC 0..11
Status: current Access: read-only
OBJECT-TYPE    
  DateAndTime  

almCurAlarmDataState 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.5
Alarm state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER almStart(1), almGo(2), almEnd(3)  

almCurAlarmDataSeverity 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.4
Alarm severity.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER critical(1), major(2), minor(3), warning(4)  

almCurAlarmDataEid 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.3
Alarm event ID.
Status: current Access: read-only
OBJECT-TYPE    
  SdhAlarmEventType  

almCurAlarmDataBid 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.2
Card ID.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

almCurAlarmDataNID 1.3.6.1.4.1.2011.2.25.3.10.30.20.10.1.1
Number ID.
Status: current Access: read-only
OBJECT-TYPE    
  Gauge32  

optixAlarmConformance 1.3.6.1.4.1.2011.2.25.3.10.30.50
OBJECT IDENTIFIER    

optixAlarmCompliances 1.3.6.1.4.1.2011.2.25.3.10.30.50.2
OBJECT IDENTIFIER    

optixAlarmbasicCompliance 1.3.6.1.4.1.2011.2.25.3.10.30.50.2.1
Enter the description of the created MODULE-COMPLIANCE.
Status: current Access: read-only
MODULE-COMPLIANCE    

optixAlarmGroups 1.3.6.1.4.1.2011.2.25.3.10.30.50.1
OBJECT IDENTIFIER    

currentObjectGroup 1.3.6.1.4.1.2011.2.25.3.10.30.50.1.1
Enter the description of the created OBJECT-GROUP.
Status: current Access: read-only
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor