OMNI-gx2drr2x-MIB

File: OMNI-gx2drr2x-MIB.mib (72731 bytes)

Imported modules

RFC-1212	RFC1213-MIB	RFC-1215
GX2HFC-MIB	NLSBBN-TRAPS-MIB

Imported symbols

OBJECT-TYPE	Counter	DisplayString
TRAP-TYPE	gx2Drr2x	trapIdentifier
trapNetworkElemModelNumber	trapNetworkElemSerialNum	trapPerceivedSeverity
trapNetworkElemOperState	trapNetworkElemAlarmStatus	trapNetworkElemAdminState
trapNetworkElemAvailStatus	trapText	trapNETrapLastTrapTimeStamp
trapChangedObjectId	trapChangedValueInteger	trapChangedValueDisplayString

Defined Types

Float
Counter

Gx2drr2xAnalogEntry
SEQUENCE
	gx2drr2xAnalogTableIndex	INTEGER
	drr2xlabelRFAAttenuation	DisplayString	Size(0..80)
	drr2xuomRFAAttenuation	DisplayString	Size(0..80)
	drr2xmajorHighRFAAttenuation	Float
	drr2xmajorLowRFAAttenuation	Float
	drr2xminorHighRFAAttenuation	Float
	drr2xminorLowRFAAttenuation	Float
	drr2xcurrentValueRFAAttenuation	Float
	drr2xstateFlagRFAAttenuation	INTEGER
	drr2xminValueRFAAttenuation	Float
	drr2xmaxValueRFAAttenuation	Float
	drr2xalarmStateRFAAttenuation	INTEGER
	drr2xlabelRFBAttenuation	DisplayString	Size(0..80)
	drr2xuomRFBAttenuation	DisplayString	Size(0..80)
	drr2xmajorHighRFBAttenuation	Float
	drr2xmajorLowRFBAttenuation	Float
	drr2xminorHighRFBAttenuation	Float
	drr2xminorLowRFBAttenuation	Float
	drr2xcurrentValueRFBAttenuation	Float
	drr2xstateFlagRFBAttenuation	INTEGER
	drr2xminValueRFBAttenuation	Float
	drr2xmaxValueRFBAttenuation	Float
	drr2xalarmStateRFBAttenuation	INTEGER
	drr2xlabelTrippointLevel	DisplayString	Size(0..80)
	drr2xuomTrippointLevel	DisplayString	Size(0..80)
	drr2xmajorHighTrippointLevel	Float
	drr2xmajorLowTrippointLevel	Float
	drr2xminorHighTrippointLevel	Float
	drr2xminorLowTrippointLevel	Float
	drr2xcurrentValueTrippointLevel	Float
	drr2xstateFlagTrippointLevel	INTEGER
	drr2xminValueTrippointLevel	Float
	drr2xmaxValueTrippointLevel	Float
	drr2xalarmStateTrippointLevel	INTEGER
	drr2xlabelOptCurrent	DisplayString	Size(0..80)
	drr2xuomOptCurrent	DisplayString	Size(0..80)
	drr2xmajorHighOptCurrent	Float
	drr2xmajorLowOptCurrent	Float
	drr2xminorHighOptCurrent	Float
	drr2xminorLowOptCurrent	Float
	drr2xcurrentValueOptCurrent	Float
	drr2xstateFlagOptCurrent	INTEGER
	drr2xminValueOptCurrent	Float
	drr2xmaxValueOptCurrent	Float
	drr2xalarmStateOptCurrent	INTEGER
	drr2xlabel12VCurrent	DisplayString	Size(0..80)
	drr2xuom12VCurrent	DisplayString	Size(0..80)
	drr2xmajorHigh12VCurrent	Float
	drr2xmajorLow12VCurrent	Float
	drr2xminorHigh12VCurrent	Float
	drr2xminorLow12VCurrent	Float
	drr2xcurrentValue12VCurrent	Float
	drr2xstateFlag12VCurrent	INTEGER
	drr2xminValue12VCurrent	Float
	drr2xmaxValue12VCurrent	Float
	drr2xalarmState12VCurrent	INTEGER
	drr2xlabelModTemp	DisplayString	Size(0..80)
	drr2xuomModTemp	DisplayString	Size(0..80)
	drr2xmajorHighModTemp	Float
	drr2xmajorLowModTemp	Float
	drr2xminorHighModTemp	Float
	drr2xminorLowModTemp	Float
	drr2xcurrentValueModTemp	Float
	drr2xstateFlagModTemp	INTEGER
	drr2xminValueModTemp	Float
	drr2xmaxValueModTemp	Float
	drr2xalarmStateModTemp	INTEGER
	drr2xlabelFanCurrent	DisplayString	Size(0..80)
	drr2xuomFanCurrent	DisplayString	Size(0..80)
	drr2xmajorHighFanCurrent	Float
	drr2xmajorLowFanCurrent	Float
	drr2xminorHighFanCurrent	Float
	drr2xminorLowFanCurrent	Float
	drr2xcurrentValueFanCurrent	Float
	drr2xstateFlagFanCurrent	INTEGER
	drr2xminValueFanCurrent	Float
	drr2xmaxValueFanCurrent	Float
	drr2xalarmStateFanCurrent	INTEGER

Gx2drr2xDigitalEntry
SEQUENCE
	gx2drr2xDigitalTableIndex	INTEGER
	drr2xlabelTrippointMode	DisplayString	Size(0..80)
	drr2xenumTrippointMode	DisplayString	Size(0..80)
	drr2xvalueTrippointMode	INTEGER
	drr2xstateflagTrippointMode	INTEGER
	drr2xlabelFactoryDefaultReset	DisplayString	Size(0..80)
	drr2xenumFactoryDefaultReset	DisplayString	Size(0..80)
	drr2xvalueFactoryDefaultReset	INTEGER
	drr2xstateflagFactoryDefaultReset	INTEGER

Gx2drr2xStatusEntry
SEQUENCE
	gx2drr2xStatusTableIndex	INTEGER
	drr2xlabelBoot	DisplayString	Size(0..80)
	drr2xvalueBoot	INTEGER
	drr2xstateflagBoot	INTEGER
	drr2xlabelFlash	DisplayString	Size(0..80)
	drr2xvalueFlash	INTEGER
	drr2xstateflagFlash	INTEGER
	drr2xlabelFactoryDataCRC	DisplayString	Size(0..80)
	drr2xvalueFactoryDataCRC	INTEGER
	drr2xstateflagFactoryDataCRC	INTEGER
	drr2xlabelAlarmDataCrc	DisplayString	Size(0..80)
	drr2xvalueAlarmDataCrc	INTEGER
	drr2xstateflagAlarmDataCrc	INTEGER
	drr2xlabelCalibrationDataCrc	DisplayString	Size(0..80)
	drr2xvalueCalibrationDataCrc	INTEGER
	drr2xstateflagCalibrationDataCrc	INTEGER
	drr2xlabelHardwareStatus	DisplayString	Size(0..80)
	drr2xvalueHardwareStatus	INTEGER
	drr2xstateflagHardwareStatus	INTEGER
	drr2xlabelOpticTripPointStatus	DisplayString	Size(0..80)
	drr2xvalueOpticTripPointStatus	INTEGER
	drr2xstateflagOpticTripPointStatus	INTEGER
	drr2xlabelLinkStatus	DisplayString	Size(0..80)
	drr2xvalueLinkStatus	INTEGER
	drr2xstateflagLinkStatus	INTEGER

Gx2drr2xFactoryEntry
SEQUENCE
	gx2drr2xFactoryTableIndex	INTEGER
	drr2xbootControlByte	INTEGER
	drr2xbootStatusByte	INTEGER
	drr2xbank1CRC	INTEGER
	drr2xbank2CRC	INTEGER
	drr2xprgEEPROMByte	INTEGER
	drr2xfactoryCRC	INTEGER
	drr2xcalculateCRC	INTEGER
	drr2xhourMeter	INTEGER
	drr2xflashPrgCntA	INTEGER
	drr2xflashPrgCntB	INTEGER
	drr2xflashBankARev	DisplayString	Size(0..80)
	drr2xflashBankBRev	DisplayString	Size(0..80)
	drr2xSubAgentRev	DisplayString	Size(0..80)

Defined Values

gx2drr2xDescriptor		1.3.6.1.4.1.1166.6.1.2.21.1
OBJECT IDENTIFIER

gx2drr2xAnalogTable		1.3.6.1.4.1.1166.6.1.2.21.2
This table contains gx2drr2x specific analog parameters with nominal,limits and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2drr2xAnalogEntry

gx2drr2xAnalogEntry		1.3.6.1.4.1.1166.6.1.2.21.2.1
This list contains the analog parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2drr2xAnalogEntry

gx2drr2xDigitalTable		1.3.6.1.4.1.1166.6.1.2.21.3
This table contains gx2drr2x specific digital parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2drr2xDigitalEntry

gx2drr2xDigitalEntry		1.3.6.1.4.1.1166.6.1.2.21.3.2
This list contains individual digital parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2drr2xDigitalEntry

gx2drr2xStatusTable		1.3.6.1.4.1.1166.6.1.2.21.4
This table contains gx2drr2x specific status parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2drr2xStatusEntry

gx2drr2xStatusEntry		1.3.6.1.4.1.1166.6.1.2.21.4.3
This list contains Status parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2drr2xStatusEntry

gx2drr2xFactoryTable		1.3.6.1.4.1.1166.6.1.2.21.5
This table contains gx2drr2x specific factory setting parameters with nominal and current values.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Gx2drr2xFactoryEntry

gx2drr2xFactoryEntry		1.3.6.1.4.1.1166.6.1.2.21.5.4
This list contains Factory setting parameters and descriptions.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Gx2drr2xFactoryEntry

gx2drr2xAnalogTableIndex		1.3.6.1.4.1.1166.6.1.2.21.2.1.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

drr2xlabelRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.2
The value of this object provides the label of the RF Channel A Attenuation Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.3
The value of this object provides the Unit of Measure of the RF Channel A Attenuation Analog parameter. The unit is in dB
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.4
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.5
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.6
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.7
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.8
The value of this object provides the Current value of the RF Channel A Attenuation Analog parameter.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

drr2xstateFlagRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.9
The value of this object provides the state of the RF Channel A Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.10
The value of this object provides the minimum value the RF Channel A Attenuation Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.11
The value of this object provides the maximum value the RF Channel A Attenuation Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateRFAAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.12
The value of this object provides the curent alarm state of the RF Channel A Attenuation Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabelRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.13
The value of this object provides the label of the RF Channel B Attenuation Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.14
The value of this object provides the Unit of Measure of the RF Channel B Attenuation Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.15
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.16
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.17
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.18
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF. It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.19
The value of this object provides the Current value of the RF Channel B Attenuation Analog parameter. The unit is dB
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

drr2xstateFlagRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.20
The value of this object provides the state of the RF Channel B Attenuation Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.21
The value of this object provides the minimum value the RF Channel B Attenuation Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.22
The value of this object provides the maximum value the RF Channel B Attenuation Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateRFBAttenuation		1.3.6.1.4.1.1166.6.1.2.21.2.1.23
The value of this object provides the curent alarm state of the RF Channel B Attenuation Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabelTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.24
The value of this object provides the label of the trip point level Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.25
The value of this object provides the Unit of Measure of the trip point level Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.26
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.27
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.28
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.29
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.30
The value of this object provides the Current value of the trip point level Analog parameter. The trip point level set the custumer preferred optical input level. This parameter combined with trippoint mode decides the trippoint alarm and RF channel output impedance. when optical power level is lower than trip point level(Set by this parameter) 1) When trip point mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will be changed to high impedance. 2) When trippoint mode is ALARM_ONLY, trippoint alarm will be generated but RF output inpedance remains to be low impedance. This trip point level value is a floating point number that is represented as an IEEE 32 bit number.
Status: mandatory	Access: read-write
OBJECT-TYPE
	Float

drr2xstateFlagTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.31
The value of this object provides the state of the trip point level Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.32
The value of this object provides the minimum value the trip point level Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.33
The value of this object provides the maximum value the trip point level Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateTrippointLevel		1.3.6.1.4.1.1166.6.1.2.21.2.1.34
The value of this object provides the curent alarm state of the trip point level Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabelOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.35
The value of this object provides the label of the Optical Power Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.36
The value of this object provides the Unit of Measure of the Optical Power Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.37
The value of this object provides the Major High alarm value of the Optical Power Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.38
The value of this object provides the Major Low alarm value of the Optical Power Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.39
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.40
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.41
The value of this object provides the Current value of the Optical Power Current Analog parameter. The input optical power in lower than min value, drr2xcurrentValueOptCurrent will report -99dBm The input optical power in higher than this value, drr2xcurrentValueOptCurrent will report 99dBm
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xstateFlagOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.42
The value of this object provides the state of the Optical Power Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.43
This is recommended min range for display gauge
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.44
This is recommended max range for display gauge
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateOptCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.45
The value of this object provides the curent alarm state of the Optical Power Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabel12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.46
The value of this object provides the label of the 12v power supply Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuom12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.47
The value of this object provides the Unit of Measure of the 12v power supply Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHigh12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.48
The value of this object provides the Major High alarm value of the 12v power supply Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLow12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.49
The value of this object provides the Major Low alarm value of the 12v power supply Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHigh12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.50
The value of this object provides the Minor High alarm value of the 12v power supply Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLow12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.51
The value of this object provides the Minor Low alarm value of the 12v power supply Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValue12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.52
The value of this object provides the Current value of the 12v power supply Current parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xstateFlag12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.53
The value of this object provides the state of the 12v power supply Current Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValue12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.54
The value of this object provides the minimum value the 12v power supply Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValue12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.55
The value of this object provides the maximum value the 12v power supply Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmState12VCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.56
The value of this object provides the curent alarm state of the 12v power supply Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabelModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.57
The value of this object provides the label of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.58
The value of this object provides the Unit of Measure of the Module Temperature Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.59
The value of this object provides the Major High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.60
The value of this object provides the Major Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.61
The value of this object provides the Minor High alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.62
The value of this object provides the Minor Low alarm value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.63
The value of this object provides the Current value of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xstateFlagModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.64
The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.65
The value of this object provides the minimum value the Module Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.66
The value of this object provides the maximum value the Module Temperature Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateModTemp		1.3.6.1.4.1.1166.6.1.2.21.2.1.67
The value of this object provides the curent alarm state of the Module Temperature Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

drr2xlabelFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.68
The value of this object provides the label of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xuomFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.69
The value of this object provides the Unit of Measure of the Fan Current Analog parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xmajorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.70
The value of this object provides the Major High alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmajorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.71
The value of this object provides the Major Low alarm value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xminorHighFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.72
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xminorLowFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.73
This object is not used by this module and always returns invalid float value of 0xFFFFFFFF . It is kept here for persistence.
Status: obsolete	Access: read-only
OBJECT-TYPE
	Float

drr2xcurrentValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.74
The value of this object provides the Current value of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xstateFlagFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.75
The value of this object provides the state of the Module Temperature Analog parameter. (1-hidden 2-read-only, 3-updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xminValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.76
The value of this object provides the minimum value the Fan Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xmaxValueFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.77
The value of this object provides the maximum value the Fan Current Analog parameter can achive.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Float

drr2xalarmStateFanCurrent		1.3.6.1.4.1.1166.6.1.2.21.2.1.78
The value of this object provides the curent alarm state of the Fan Current Analog parameter.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	noAlarm(1), majorLowAlarm(2), minorLowAlarm(3), minorHighAlarm(4), majorHighAlarm(5), informational(6)

gx2drr2xDigitalTableIndex		1.3.6.1.4.1.1166.6.1.2.21.3.2.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

drr2xlabelTrippointMode		1.3.6.1.4.1.1166.6.1.2.21.3.2.2
The value of this object provides the label of the Trip point mode Digital parameter. The trip point mode defines the RF switch action based on the optical power input to the DRR
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xenumTrippointMode		1.3.6.1.4.1.1166.6.1.2.21.3.2.3
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueTrippointMode		1.3.6.1.4.1.1166.6.1.2.21.3.2.4
The value of this object is the current value of trip point mode. There are three possible value: 1-off, 2-alarm_only, 3-alarm&switch. If module input optical power is higher than the preset trippoint value, no operational difference for these three modes. If module input optical power is less than the preset trippoint value, 1) When trippoint mode is OFF, no trippoint alarm will be generated and RF output impedance will stay normal as low. 2) When tripoint mode is ALARM_ONLY, trip_point alarm will be generated when the input optical power lower than the preset trippoint level but RF output impedance will stay normal as low. 3) When trippoint mode is ALARM_SWITCH, trip point alarm will be generated and RF output impedance will switch to abnorml
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), alarmOnly(2), alarm-and-Switch(3)

drr2xstateflagTrippointMode		1.3.6.1.4.1.1166.6.1.2.21.3.2.5
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), readOnly(2), updateable(3)

drr2xlabelFactoryDefaultReset		1.3.6.1.4.1.1166.6.1.2.21.3.2.6
The value of this object provides the label of the Factory Default Reset Digital parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xenumFactoryDefaultReset		1.3.6.1.4.1.1166.6.1.2.21.3.2.7
The value of this object represents the Enumeration values possible for the Digital parameter. Each Enumerated values is separated by a common. The first value has a enumerated value of 1.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueFactoryDefaultReset		1.3.6.1.4.1.1166.6.1.2.21.3.2.8
The read of this value will return a invalid value. The read will not reflect the actual setting value for this parameter
Status: mandatory	Access: read-write
OBJECT-TYPE
	INTEGER	off(1), on(2)

drr2xstateflagFactoryDefaultReset		1.3.6.1.4.1.1166.6.1.2.21.3.2.9
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2drr2xStatusTableIndex		1.3.6.1.4.1.1166.6.1.2.21.4.3.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

drr2xlabelBoot		1.3.6.1.4.1.1166.6.1.2.21.4.3.2
The value of this object provides the label of the Boot Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueBoot		1.3.6.1.4.1.1166.6.1.2.21.4.3.3
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagBoot		1.3.6.1.4.1.1166.6.1.2.21.4.3.4
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelFlash		1.3.6.1.4.1.1166.6.1.2.21.4.3.5
The value of this object provides the label of the Flash Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueFlash		1.3.6.1.4.1.1166.6.1.2.21.4.3.6
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagFlash		1.3.6.1.4.1.1166.6.1.2.21.4.3.7
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.21.4.3.8
The value of this object provides the label of the Factory Data CRC Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.21.4.3.9
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagFactoryDataCRC		1.3.6.1.4.1.1166.6.1.2.21.4.3.10
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.11
The value of this object provides the label of the Alarm Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.12
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagAlarmDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.13
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelCalibrationDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.14
The value of this object provides the label of the Calibration Data Crc parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueCalibrationDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.15
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagCalibrationDataCrc		1.3.6.1.4.1.1166.6.1.2.21.4.3.16
The value of this object provides the state of the the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelHardwareStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.17
The value of this object provides the label of the Module Hardware Status parameter.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueHardwareStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.18
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagHardwareStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.19
The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelOpticTripPointStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.20
The value of this object provides the label of the Optical Trip Point Status parameter.It indicates whether the optical power is above(0) or below(1) trip point value
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueOpticTripPointStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.21
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagOpticTripPointStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.22
The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

drr2xlabelLinkStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.23
The value of this object provides the label of the Link Activity Status parameter. It represents receiver out of SYN with transmitter or Demux can not detect the optical signal.
Status: optional	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xvalueLinkStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.24
The value of this object provides the current state of the parameter (1-Ok, 2-Undetermined 3-Warning, 4-Minor, 5-Major, 6-Critical).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ok(1), undetermined(2), warning(3), minor(4), major(5), critical(6)

drr2xstateflagLinkStatus		1.3.6.1.4.1.1166.6.1.2.21.4.3.25
The value of this object provides the state of the parameter. (1-Hidden 2-Read-Only, 3-Updateable).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	hidden(1), read-only(2), updateable(3)

gx2drr2xFactoryTableIndex		1.3.6.1.4.1.1166.6.1.2.21.5.4.1
The value of this object identifies the network element. This index is equal to the hfcCommonTableIndex for the same element.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..2147483647

drr2xbootControlByte		1.3.6.1.4.1.1166.6.1.2.21.5.4.2
The value of this object indicates which bank the firmware is currently being boot from.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xbootStatusByte		1.3.6.1.4.1.1166.6.1.2.21.5.4.3
This object indicates the status of the last boot
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xbank1CRC		1.3.6.1.4.1.1166.6.1.2.21.5.4.4
This object provides the CRC code of bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xbank2CRC		1.3.6.1.4.1.1166.6.1.2.21.5.4.5
This object provides the CRC code of bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xprgEEPROMByte		1.3.6.1.4.1.1166.6.1.2.21.5.4.6
This object indicates if the EEPROM has been programmed
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xfactoryCRC		1.3.6.1.4.1.1166.6.1.2.21.5.4.7
This object provides the CRC code for the Factory data.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xcalculateCRC		1.3.6.1.4.1.1166.6.1.2.21.5.4.8
This object indicates which of the Emnums will have the CRC calculated (1-factory, 2-alarm, 3-calibration).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	factory(1), alarm(2), calibration(3)

drr2xhourMeter		1.3.6.1.4.1.1166.6.1.2.21.5.4.9
This object provides the hour meter reading of the module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xflashPrgCntA		1.3.6.1.4.1.1166.6.1.2.21.5.4.10
This object provides the number of times Bank 0 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xflashPrgCntB		1.3.6.1.4.1.1166.6.1.2.21.5.4.11
This object provides the number of times Bank 1 flash has been programmed.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

drr2xflashBankARev		1.3.6.1.4.1.1166.6.1.2.21.5.4.12
This object provides the revision of flash bank 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xflashBankBRev		1.3.6.1.4.1.1166.6.1.2.21.5.4.13
This object provides the revision of flash bank 1.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

drr2xSubAgentRev		1.3.6.1.4.1.1166.6.1.2.21.5.4.14
This object provides the subagent revision of receiver module.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..80)

trapdrrConfigChangeInteger		1
This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapdrrConfigChangeDisplayString		2
This trap is issued if configuration of a single variable with DispalayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may contain current reading of that variable. trapPerceivedSeverity - 'indeterminate'
TRAP-TYPE

trapdrr12VCurrentAlarm		3
This trap is issued when the 12V power supply Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapdrrModuleTempAlarm		4
This trap is issued when the Internal Module Temperature goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapdrrFanCurrentAlarm		5
This trap is issued when the Fan Current parameter goes out of range. trapAdditionalInfoInteger variable contains current reading of the this parameter.
TRAP-TYPE

trapdrrFlashAlarm		6
This trap is issued when the detects an error during Flash memory operations.
TRAP-TYPE

trapdrrBankBootAlarm		7
This trap is issued when the module detects an error while booting from bank 0 or bank 1.
TRAP-TYPE

trapdrrAlarmDataCRCAlarm		8
This trap is issued when the Alarm Data CRC is incorrect.
TRAP-TYPE

trapdrrHardwareErrAlarm		9
This trap is issued when hardware is abnormal.
TRAP-TYPE

trapdrrOpticalSignalAlarm		10
This trap is issued when the optical signal is beyond the preset range.
TRAP-TYPE

trapdrrFactoryDataCRCAlarm		11
This trap is issued when the Factory Data CRC is incorrect.
TRAP-TYPE

trapdrrResetFactoryDefaultAlarm		12
This trap is issued when the Factory Default Reset occurs.
TRAP-TYPE

trapdrrTripPointAlarm		13
This trap is issued when the Input optical power is lower than the custumer set trip point and trippoint mode as ALARM_ONLY or SWITCH & ALARM.
TRAP-TYPE

trapdrrLinkAlarm		14
This trap is issued when receiver is out of SYN with transmitter
TRAP-TYPE

trapdrrCalibrationDataCRCAlarm		15
This trap is issued when the Calibration Data CRC is incorrect
TRAP-TYPE