NETBOTZV2-MIB
File:
NETBOTZV2-MIB.mib (293009 bytes)
Imported modules
Imported symbols
Defined Types
OperStatus |
|
The operational status of the device entity. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
disconnected(0), error(1), normal(2) |
|
ErrorStatus |
|
The error status of the device entity. If there are no error conditions
reported for the entity, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the entity. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
normal(0), info(1), warning(2), error(3), critical(4), failure(5) |
|
BoolValue |
|
A boolean value. |
TEXTUAL-CONVENTION |
|
|
|
|
INTEGER |
no(0), yes(1), null(2) |
|
EnclosureEntry |
|
SEQUENCE |
|
|
|
|
enclosureId |
DisplayString |
|
|
enclosureStatus |
OperStatus |
|
|
enclosureErrorStatus |
ErrorStatus |
|
|
enclosureLabel |
DisplayString |
|
|
enclosureParentEncId |
DisplayString |
|
|
enclosureDockedToEncId |
DisplayString |
|
DINPortEntry |
|
SEQUENCE |
|
|
|
|
dinPortId |
DisplayString |
|
|
dinPortStatus |
OperStatus |
|
|
dinPortLabel |
DisplayString |
|
|
dinPortEncId |
DisplayString |
|
|
dinPortSensorIdSuffix |
DisplayString |
|
|
dinPortSupportsAverage |
BoolValue |
|
|
dinPortSupportsRMS |
BoolValue |
|
|
dinPortSupportsDryContact |
BoolValue |
|
OtherPortEntry |
|
SEQUENCE |
|
|
|
|
otherPortId |
DisplayString |
|
|
otherPortStatus |
OperStatus |
|
|
otherPortLabel |
DisplayString |
|
|
otherPortEncId |
DisplayString |
|
TempSensorEntry |
|
SEQUENCE |
|
|
|
|
tempSensorId |
DisplayString |
|
|
tempSensorValue |
Integer32 |
|
|
tempSensorErrorStatus |
ErrorStatus |
|
|
tempSensorLabel |
DisplayString |
|
|
tempSensorEncId |
DisplayString |
|
|
tempSensorPortId |
DisplayString |
|
|
tempSensorValueStr |
DisplayString |
|
|
tempSensorValueInt |
Integer32 |
|
|
tempSensorValueIntF |
Integer32 |
|
HumiSensorEntry |
|
SEQUENCE |
|
|
|
|
humiSensorId |
DisplayString |
|
|
humiSensorValue |
Integer32 |
|
|
humiSensorErrorStatus |
ErrorStatus |
|
|
humiSensorLabel |
DisplayString |
|
|
humiSensorEncId |
DisplayString |
|
|
humiSensorPortId |
DisplayString |
|
|
humiSensorValueStr |
DisplayString |
|
|
humiSensorValueInt |
Integer32 |
|
DewPointSensorEntry |
|
SEQUENCE |
|
|
|
|
dewPointSensorId |
DisplayString |
|
|
dewPointSensorValue |
Integer32 |
|
|
dewPointSensorErrorStatus |
ErrorStatus |
|
|
dewPointSensorLabel |
DisplayString |
|
|
dewPointSensorEncId |
DisplayString |
|
|
dewPointSensorPortId |
DisplayString |
|
|
dewPointSensorValueStr |
DisplayString |
|
|
dewPointSensorValueInt |
Integer32 |
|
AudioSensorEntry |
|
SEQUENCE |
|
|
|
|
audioSensorId |
DisplayString |
|
|
audioSensorValue |
Integer32 |
|
|
audioSensorErrorStatus |
ErrorStatus |
|
|
audioSensorLabel |
DisplayString |
|
|
audioSensorEncId |
DisplayString |
|
|
audioSensorPortId |
DisplayString |
|
|
audioSensorValueStr |
DisplayString |
|
|
audioSensorValueInt |
Integer32 |
|
AirFlowSensorEntry |
|
SEQUENCE |
|
|
|
|
airFlowSensorId |
DisplayString |
|
|
airFlowSensorValue |
Integer32 |
|
|
airFlowSensorErrorStatus |
ErrorStatus |
|
|
airFlowSensorLabel |
DisplayString |
|
|
airFlowSensorEncId |
DisplayString |
|
|
airFlowSensorPortId |
DisplayString |
|
|
airFlowSensorValueStr |
DisplayString |
|
|
airFlowSensorValueInt |
Integer32 |
|
AmpDetectSensorEntry |
|
SEQUENCE |
|
|
|
|
ampDetectSensorId |
DisplayString |
|
|
ampDetectSensorValue |
Integer32 |
|
|
ampDetectSensorErrorStatus |
ErrorStatus |
|
|
ampDetectSensorLabel |
DisplayString |
|
|
ampDetectSensorEncId |
DisplayString |
|
|
ampDetectSensorPortId |
DisplayString |
|
|
ampDetectSensorValueStr |
DisplayString |
|
|
ampDetectSensorValueInt |
Integer32 |
|
OtherNumericSensorEntry |
|
SEQUENCE |
|
|
|
|
otherNumericSensorId |
DisplayString |
|
|
otherNumericSensorValue |
Integer32 |
|
|
otherNumericSensorErrorStatus |
ErrorStatus |
|
|
otherNumericSensorLabel |
DisplayString |
|
|
otherNumericSensorEncId |
DisplayString |
|
|
otherNumericSensorPortId |
DisplayString |
|
|
otherNumericSensorValueStr |
DisplayString |
|
|
otherNumericSensorValueInt |
Integer32 |
|
|
otherNumericSensorUnits |
DisplayString |
|
|
otherNumericSensorValueIntX1000 |
Integer32 |
|
|
otherNumericSensorValueIntX1000000 |
Integer32 |
|
DoorSwitchSensorEntry |
|
SEQUENCE |
|
|
|
|
doorSwitchSensorId |
DisplayString |
|
|
doorSwitchSensorValue |
INTEGER |
|
|
doorSwitchSensorErrorStatus |
ErrorStatus |
|
|
doorSwitchSensorLabel |
DisplayString |
|
|
doorSwitchSensorEncId |
DisplayString |
|
|
doorSwitchSensorPortId |
DisplayString |
|
|
doorSwitchSensorValueStr |
DisplayString |
|
CameraMotionSensorEntry |
|
SEQUENCE |
|
|
|
|
cameraMotionSensorId |
DisplayString |
|
|
cameraMotionSensorValue |
INTEGER |
|
|
cameraMotionSensorErrorStatus |
ErrorStatus |
|
|
cameraMotionSensorLabel |
DisplayString |
|
|
cameraMotionSensorEncId |
DisplayString |
|
|
cameraMotionSensorPortId |
DisplayString |
|
|
cameraMotionSensorValueStr |
DisplayString |
|
OtherStateSensorEntry |
|
SEQUENCE |
|
|
|
|
otherStateSensorId |
DisplayString |
|
|
otherStateSensorValue |
INTEGER |
|
|
otherStateSensorErrorStatus |
ErrorStatus |
|
|
otherStateSensorLabel |
DisplayString |
|
|
otherStateSensorEncId |
DisplayString |
|
|
otherStateSensorPortId |
DisplayString |
|
|
otherStateSensorValueStr |
DisplayString |
|
ErrorCondEntry |
|
SEQUENCE |
|
|
|
|
errorCondId |
DisplayString |
|
|
errorCondSeverity |
ErrorStatus |
|
|
errorCondTypeId |
DisplayString |
|
|
errorCondStartTime |
DateAndTime |
|
|
errorCondStartTimeStr |
DisplayString |
|
|
errorCondResolved |
BoolValue |
|
|
errorCondResolvedTime |
DateAndTime |
|
|
errorCondResolvedTimeStr |
DisplayString |
|
|
errorCondEncId |
DisplayString |
|
|
errorCondPortId |
DisplayString |
|
|
errorCondSensorId |
DisplayString |
|
Defined Values
netBotz-V2 |
1.3.6.1.4.1.5528.100.1 |
NetBotz BotzWare V2.x MIB |
MODULE-IDENTITY |
|
|
|
netBotz |
1.3.6.1.4.1.5528 |
OBJECT IDENTIFIER |
|
|
|
netBotzV2 |
1.3.6.1.4.1.5528.100 |
OBJECT IDENTIFIER |
|
|
|
enclosureTable |
1.3.6.1.4.1.5528.100.2.1 |
A list of enclosures (base enclosure and pods). |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
EnclosureEntry |
|
enclosureEntry |
1.3.6.1.4.1.5528.100.2.1.1 |
Enclosure entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
EnclosureEntry |
|
|
enclosureId |
1.3.6.1.4.1.5528.100.2.1.1.1 |
The id of the physical enclosure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
enclosureStatus |
1.3.6.1.4.1.5528.100.2.1.1.2 |
The operational status of the enclosure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OperStatus |
|
|
enclosureErrorStatus |
1.3.6.1.4.1.5528.100.2.1.1.3 |
The error status of the enclosure. If there are no error conditions
reported for the enclosure, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the enclosure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
enclosureLabel |
1.3.6.1.4.1.5528.100.2.1.1.4 |
The unique label assigned to the enclosure (or pod). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
enclosureParentEncId |
1.3.6.1.4.1.5528.100.2.1.1.5 |
The id of the parent enclosure this enclosure is attached to. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
enclosureDockedToEncId |
1.3.6.1.4.1.5528.100.2.1.1.6 |
The id of the enclosure this enclosure is hard-docked with,
i.e. as when sensor and camera pods are docked with the base
system unit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dinPortTable |
1.3.6.1.4.1.5528.100.3.1 |
A list of DIN port entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
DINPortEntry |
|
dinPortEntry |
1.3.6.1.4.1.5528.100.3.1.1 |
DIN port entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DINPortEntry |
|
|
dinPortId |
1.3.6.1.4.1.5528.100.3.1.1.1 |
The unique id of the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dinPortStatus |
1.3.6.1.4.1.5528.100.3.1.1.2 |
The operational status of the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OperStatus |
|
|
dinPortLabel |
1.3.6.1.4.1.5528.100.3.1.1.3 |
The unique label assigned to the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dinPortEncId |
1.3.6.1.4.1.5528.100.3.1.1.4 |
The id of the physical enclosure containing the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dinPortSensorIdSuffix |
1.3.6.1.4.1.5528.100.3.1.1.5 |
The ID suffix added to a sensor plugged into the port.
The ID suffix is combined with the sensor class ID when
generating a local unique id for the DIN sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dinPortSupportsAverage |
1.3.6.1.4.1.5528.100.3.1.1.6 |
Whether the port supports returning the average voltage
reading of the sensor. This is used to determine which
classes of sensors are supported by the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BoolValue |
|
|
dinPortSupportsRMS |
1.3.6.1.4.1.5528.100.3.1.1.7 |
Whether the port supports returning the AC RMS voltage
reading of the sensor. This is used to determine which
classes of sensors are supported by the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BoolValue |
|
|
otherPortTable |
1.3.6.1.4.1.5528.100.3.10 |
A list of other port entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
OtherPortEntry |
|
otherPortEntry |
1.3.6.1.4.1.5528.100.3.10.1 |
Other port entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OtherPortEntry |
|
|
otherPortId |
1.3.6.1.4.1.5528.100.3.10.1.1 |
The unique id of the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
otherPortStatus |
1.3.6.1.4.1.5528.100.3.10.1.2 |
The operational status of the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
OperStatus |
|
|
otherPortLabel |
1.3.6.1.4.1.5528.100.3.10.1.3 |
The unique label assigned to the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
otherPortEncId |
1.3.6.1.4.1.5528.100.3.10.1.4 |
The id of the physical enclosure containing the port. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
tempSensorTable |
1.3.6.1.4.1.5528.100.4.1.1 |
A list of temperature sensor entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
TempSensorEntry |
|
tempSensorEntry |
1.3.6.1.4.1.5528.100.4.1.1.1 |
A temperature sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
TempSensorEntry |
|
|
tempSensorId |
1.3.6.1.4.1.5528.100.4.1.1.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
tempSensorValue |
1.3.6.1.4.1.5528.100.4.1.1.1.2 |
The temperature measured by the sensor in tenths of a degree Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-500..1000 |
|
tempSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.1.1.3 |
The error status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
tempSensorLabel |
1.3.6.1.4.1.5528.100.4.1.1.1.4 |
The unique label assigned to the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tempSensorEncId |
1.3.6.1.4.1.5528.100.4.1.1.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
tempSensorPortId |
1.3.6.1.4.1.5528.100.4.1.1.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
tempSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.1.1.7 |
The temperature reading, in degrees celsius, shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
tempSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.1.1.8 |
The temperature measured by the sensor in degree Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-50..100 |
|
tempSensorValueIntF |
1.3.6.1.4.1.5528.100.4.1.1.1.9 |
The temperature measured by the sensor in degree Farenheit. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-50..212 |
|
humiSensorTable |
1.3.6.1.4.1.5528.100.4.1.2 |
A list of humidity sensor entries. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
HumiSensorEntry |
|
humiSensorEntry |
1.3.6.1.4.1.5528.100.4.1.2.1 |
A humidity sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
HumiSensorEntry |
|
|
humiSensorId |
1.3.6.1.4.1.5528.100.4.1.2.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
humiSensorValue |
1.3.6.1.4.1.5528.100.4.1.2.1.2 |
The relative humidity measured by the sensor in tenths of a percent. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1000 |
|
humiSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.2.1.3 |
The error status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
humiSensorLabel |
1.3.6.1.4.1.5528.100.4.1.2.1.4 |
The unique label assigned to the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
humiSensorEncId |
1.3.6.1.4.1.5528.100.4.1.2.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
humiSensorPortId |
1.3.6.1.4.1.5528.100.4.1.2.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
humiSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.2.1.7 |
The humidity reading, in percent, shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
humiSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.2.1.8 |
The relative humidity measured by the sensor in percent. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..100 |
|
dewPointSensorEntry |
1.3.6.1.4.1.5528.100.4.1.3.1 |
An ampere sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DewPointSensorEntry |
|
|
dewPointSensorId |
1.3.6.1.4.1.5528.100.4.1.3.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dewPointSensorValue |
1.3.6.1.4.1.5528.100.4.1.3.1.2 |
The dew point value measured by the sensor in tenths of a degree Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-500..1000 |
|
dewPointSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.3.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
dewPointSensorEncId |
1.3.6.1.4.1.5528.100.4.1.3.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dewPointSensorPortId |
1.3.6.1.4.1.5528.100.4.1.3.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
dewPointSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.3.1.7 |
The dew point reading, in degrees celsius, shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
dewPointSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.3.1.8 |
The dew point value measured by the sensor in degrees Celsius. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
-50..100 |
|
audioSensorEntry |
1.3.6.1.4.1.5528.100.4.1.4.1 |
An audio sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AudioSensorEntry |
|
|
audioSensorId |
1.3.6.1.4.1.5528.100.4.1.4.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
audioSensorValue |
1.3.6.1.4.1.5528.100.4.1.4.1.2 |
The (unitless) audio level measured by the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
audioSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.4.1.3 |
The error status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
audioSensorLabel |
1.3.6.1.4.1.5528.100.4.1.4.1.4 |
The unique label assigned to the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
audioSensorEncId |
1.3.6.1.4.1.5528.100.4.1.4.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
audioSensorPortId |
1.3.6.1.4.1.5528.100.4.1.4.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
audioSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.4.1.7 |
The audio reading shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
audioSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.4.1.8 |
The (unitless) audio level measured by the sensor (1/10 of audioSensorValue). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
airFlowSensorEntry |
1.3.6.1.4.1.5528.100.4.1.5.1 |
An air flow sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AirFlowSensorEntry |
|
|
airFlowSensorId |
1.3.6.1.4.1.5528.100.4.1.5.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
airFlowSensorValue |
1.3.6.1.4.1.5528.100.4.1.5.1.2 |
The air flow measured by the sensor in tenths of a meter per minute. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..10000 |
|
airFlowSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.5.1.3 |
The error status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
airFlowSensorEncId |
1.3.6.1.4.1.5528.100.4.1.5.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
airFlowSensorPortId |
1.3.6.1.4.1.5528.100.4.1.5.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
airFlowSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.5.1.7 |
The airflow reading, in meters per minute, shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
airFlowSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.5.1.8 |
The air flow measured by the sensor in meters per minute. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..1000 |
|
ampDetectSensorEntry |
1.3.6.1.4.1.5528.100.4.1.6.1 |
An ampere sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
AmpDetectSensorEntry |
|
|
ampDetectSensorId |
1.3.6.1.4.1.5528.100.4.1.6.1.1 |
The unique id of the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
ampDetectSensorValue |
1.3.6.1.4.1.5528.100.4.1.6.1.2 |
The value measured by the sensor in tenths of an ampere. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..65535 |
|
ampDetectSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.6.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
ampDetectSensorEncId |
1.3.6.1.4.1.5528.100.4.1.6.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
ampDetectSensorPortId |
1.3.6.1.4.1.5528.100.4.1.6.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
ampDetectSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.6.1.7 |
The amp detect reading, in amperes, shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
ampDetectSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.6.1.8 |
The value measured by the sensor in amperes. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
0..6554 |
|
otherNumericSensorEntry |
1.3.6.1.4.1.5528.100.4.1.10.1 |
Other numeric sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OtherNumericSensorEntry |
|
|
otherNumericSensorValue |
1.3.6.1.4.1.5528.100.4.1.10.1.2 |
The value measured by the sensor in tenths of the unit of measure. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
otherNumericSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.1.10.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
otherNumericSensorEncId |
1.3.6.1.4.1.5528.100.4.1.10.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
otherNumericSensorPortId |
1.3.6.1.4.1.5528.100.4.1.10.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
otherNumericSensorValueStr |
1.3.6.1.4.1.5528.100.4.1.10.1.7 |
The sensor reading shown as a string (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
otherNumericSensorValueInt |
1.3.6.1.4.1.5528.100.4.1.10.1.8 |
The value measured by the sensor in the unit of measure (1/10 of otherNumericSensorValue) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
otherNumericSensorValueIntX1000 |
1.3.6.1.4.1.5528.100.4.1.10.1.10 |
The value measured by the sensor in thousandths of the unit of measure (100 times otherNumericSensorValue) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
otherNumericSensorValueIntX1000000 |
1.3.6.1.4.1.5528.100.4.1.10.1.11 |
The value measured by the sensor in millionths of the unit of measure (100000 times otherNumericSensorValue) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
Integer32 |
|
|
doorSwitchSensorEntry |
1.3.6.1.4.1.5528.100.4.2.2.1 |
Door switch sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
DoorSwitchSensorEntry |
|
|
doorSwitchSensorValue |
1.3.6.1.4.1.5528.100.4.2.2.1.2 |
Whether the door is open or closed. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
null(-1), open(0), closed(1) |
|
doorSwitchSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.2.2.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
doorSwitchSensorEncId |
1.3.6.1.4.1.5528.100.4.2.2.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
doorSwitchSensorPortId |
1.3.6.1.4.1.5528.100.4.2.2.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
cameraMotionSensorEntry |
1.3.6.1.4.1.5528.100.4.2.3.1 |
Camera motion sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
CameraMotionSensorEntry |
|
|
cameraMotionSensorValue |
1.3.6.1.4.1.5528.100.4.2.3.1.2 |
Whether motion is detected by the camera sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
null(-1), noMotion(0), motionDetected(1) |
|
cameraMotionSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.2.3.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
cameraMotionSensorEncId |
1.3.6.1.4.1.5528.100.4.2.3.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
cameraMotionSensorPortId |
1.3.6.1.4.1.5528.100.4.2.3.1.6 |
The id of the port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
otherStateSensorEntry |
1.3.6.1.4.1.5528.100.4.2.10.1 |
Other state sensor entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
OtherStateSensorEntry |
|
|
otherStateSensorValue |
1.3.6.1.4.1.5528.100.4.2.10.1.2 |
State value reported by the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
otherStateSensorErrorStatus |
1.3.6.1.4.1.5528.100.4.2.10.1.3 |
The operational status of the sensor. If there are no error conditions
reported for the sensor, the status is normal. Otherwise, the status is
reported as the severity value of the highest severity error condition
that is not resolved for the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
otherStateSensorEncId |
1.3.6.1.4.1.5528.100.4.2.10.1.5 |
The id of the physical enclosure containing the sensor. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
otherStateSensorPortId |
1.3.6.1.4.1.5528.100.4.2.10.1.6 |
The id of port the sensor is plugged into (or empty string
if it is not plugged into a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
errorCondTable |
1.3.6.1.4.1.5528.100.5.1 |
A list of active and resolved error conditions. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
SEQUENCE OF |
|
|
|
|
ErrorCondEntry |
|
errorCondEntry |
1.3.6.1.4.1.5528.100.5.1.1 |
Error condition entry. |
Status: current |
Access: not-accessible |
OBJECT-TYPE |
|
|
|
|
ErrorCondEntry |
|
|
errorCondId |
1.3.6.1.4.1.5528.100.5.1.1.1 |
The unique id of the error condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
errorCondSeverity |
1.3.6.1.4.1.5528.100.5.1.1.2 |
The relative severity of the error condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
ErrorStatus |
|
|
errorCondTypeId |
1.3.6.1.4.1.5528.100.5.1.1.3 |
The error type id reported for the error condition. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
errorCondStartTime |
1.3.6.1.4.1.5528.100.5.1.1.4 |
The start time of the error condition, in msec since 1/1/1970. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
errorCondStartTimeStr |
1.3.6.1.4.1.5528.100.5.1.1.5 |
The start time of the error condition, as ISO date-time formatted string (UTC). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
errorCondResolved |
1.3.6.1.4.1.5528.100.5.1.1.6 |
Whether the error condition was resolved. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
BoolValue |
|
|
errorCondResolvedTime |
1.3.6.1.4.1.5528.100.5.1.1.7 |
The time the error condition was resolved (if it was resolved), in msec since 1/1/1970. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DateAndTime |
|
|
errorCondResolvedTimeStr |
1.3.6.1.4.1.5528.100.5.1.1.8 |
The time the error condition was resolved (if it was resolved), as ISO date-time formatted string (UTC). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
errorCondEncId |
1.3.6.1.4.1.5528.100.5.1.1.9 |
The id of the physical enclosure associated with the error. |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
errorCondPortId |
1.3.6.1.4.1.5528.100.5.1.1.10 |
The id of the port associated with the error (or empty string
if the error is not associated with a port). |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
errorCondSensorId |
1.3.6.1.4.1.5528.100.5.1.1.11 |
The id of the sensor associated with the error (or empty string
if the error is not associated with a sensor.) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
netBotzV2TrapErrorID |
1.3.6.1.4.1.5528.100.11.1 |
Unique ID of error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
netBotzV2TrapSensorID |
1.3.6.1.4.1.5528.100.11.4 |
ID of sensor associated with error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
netBotzV2TrapPodID |
1.3.6.1.4.1.5528.100.11.6 |
ID of pod associated with error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
netBotzV2TrapPodLabel |
1.3.6.1.4.1.5528.100.11.7 |
Label of pod associated with error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
netBotzV2TrapPortID |
1.3.6.1.4.1.5528.100.11.8 |
ID of port associated with error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
Size(0..127) |
|
netBotzV2TrapPortLabel |
1.3.6.1.4.1.5528.100.11.9 |
Label of port associated with error condition that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
DisplayString |
|
|
netBotzV2TrapStartTime |
1.3.6.1.4.1.5528.100.11.10 |
Start time (in UTC seconds) for error that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netBotzV2TrapNotifyTime |
1.3.6.1.4.1.5528.100.11.11 |
Notification time (in UTC seconds) for error that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netBotzV2TrapResolveTime |
1.3.6.1.4.1.5528.100.11.12 |
Resolve time (in UTC seconds) for error that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netBotzV2TrapSeverity |
1.3.6.1.4.1.5528.100.11.13 |
Severity of error that produced the trap |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
information(0), warning(1), error(2), critical(3), failure(4) |
|
netBotzV2TrapSensorValueInt |
1.3.6.1.4.1.5528.100.11.15 |
Whole integer representation of value of sensor (without decimal portion) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netBotzV2TrapSensorValueFraction |
1.3.6.1.4.1.5528.100.11.16 |
Fractional portion of value of sensor (multiplied by 1000000) |
Status: current |
Access: read-only |
OBJECT-TYPE |
|
|
|
|
INTEGER |
|
|
netBotzTempTooHigh |
1.3.6.1.4.1.5528.100.10.2.1.0.2 |
Temperature sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.1.0.102 |
Temperature sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempUnplugged |
1.3.6.1.4.1.5528.100.10.2.1.0.6 |
Temperature sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempReplugged |
1.3.6.1.4.1.5528.100.10.2.1.0.106 |
Temperature sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempIncreasingTooQuickly |
1.3.6.1.4.1.5528.100.10.2.1.0.8 |
Temperature sensor value increasing too quickly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempNotIncreasingTooQuickly |
1.3.6.1.4.1.5528.100.10.2.1.0.108 |
Temperature sensor value no longer increasing too quickly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempDecreasingTooQuickly |
1.3.6.1.4.1.5528.100.10.2.1.0.9 |
Temperature sensor value decreasing too quickly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempNotDecreasingTooQuickly |
1.3.6.1.4.1.5528.100.10.2.1.0.109 |
Temperature sensor value no longer decreasing too quickly. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempError |
1.3.6.1.4.1.5528.100.10.2.1.0.1 |
Temperature sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTempErrorRTN |
1.3.6.1.4.1.5528.100.10.2.1.0.101 |
Temperature sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityTooHigh |
1.3.6.1.4.1.5528.100.10.2.2.0.2 |
Humidity sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.2.0.102 |
Humidity sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityUnplugged |
1.3.6.1.4.1.5528.100.10.2.2.0.6 |
Humidity sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityReplugged |
1.3.6.1.4.1.5528.100.10.2.2.0.106 |
Humidity sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityError |
1.3.6.1.4.1.5528.100.10.2.2.0.1 |
Humidity sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzHumidityErrorRTN |
1.3.6.1.4.1.5528.100.10.2.2.0.101 |
Humidity sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointTooHigh |
1.3.6.1.4.1.5528.100.10.2.3.0.2 |
DewPoint sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.3.0.102 |
DewPoint sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointUnplugged |
1.3.6.1.4.1.5528.100.10.2.3.0.6 |
DewPoint sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointReplugged |
1.3.6.1.4.1.5528.100.10.2.3.0.106 |
DewPoint sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointError |
1.3.6.1.4.1.5528.100.10.2.3.0.1 |
DewPoint sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDewPointErrorRTN |
1.3.6.1.4.1.5528.100.10.2.3.0.101 |
DewPoint sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowTooHigh |
1.3.6.1.4.1.5528.100.10.2.4.0.2 |
AirFlow sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.4.0.102 |
AirFlow sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowUnplugged |
1.3.6.1.4.1.5528.100.10.2.4.0.6 |
AirFlow sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowReplugged |
1.3.6.1.4.1.5528.100.10.2.4.0.106 |
AirFlow sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowError |
1.3.6.1.4.1.5528.100.10.2.4.0.1 |
AirFlow sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAirFlowErrorRTN |
1.3.6.1.4.1.5528.100.10.2.4.0.101 |
AirFlow sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioTooHigh |
1.3.6.1.4.1.5528.100.10.2.5.0.2 |
Audio sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.5.0.102 |
Audio sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioUnplugged |
1.3.6.1.4.1.5528.100.10.2.5.0.6 |
Audio sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioReplugged |
1.3.6.1.4.1.5528.100.10.2.5.0.106 |
Audio sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioError |
1.3.6.1.4.1.5528.100.10.2.5.0.1 |
Audio sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAudioErrorRTN |
1.3.6.1.4.1.5528.100.10.2.5.0.101 |
Audio sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectTooHigh |
1.3.6.1.4.1.5528.100.10.2.6.0.2 |
Amp Detectsensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.6.0.102 |
Amp Detectsensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectUnplugged |
1.3.6.1.4.1.5528.100.10.2.6.0.6 |
Amp Detectsensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectReplugged |
1.3.6.1.4.1.5528.100.10.2.6.0.106 |
Amp Detectsensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectError |
1.3.6.1.4.1.5528.100.10.2.6.0.1 |
Amp Detectsensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzAmpDetectErrorRTN |
1.3.6.1.4.1.5528.100.10.2.6.0.101 |
Amp Detectsensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorUnplugged |
1.3.6.1.4.1.5528.100.10.2.9.0.6 |
Door Sensor sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorReplugged |
1.3.6.1.4.1.5528.100.10.2.9.0.106 |
Door Sensor sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorError |
1.3.6.1.4.1.5528.100.10.2.9.0.1 |
Door Sensor sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.9.0.101 |
Door Sensor sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorValueError |
1.3.6.1.4.1.5528.100.10.2.9.0.10 |
Door Sensor sensor value error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDoorSensorValueErrorRTN |
1.3.6.1.4.1.5528.100.10.2.9.0.110 |
Door Sensor sensor value error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMicPlugSensorUnplugged |
1.3.6.1.4.1.5528.100.10.2.10.0.6 |
MicPlug Sensor sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMicPlugSensorReplugged |
1.3.6.1.4.1.5528.100.10.2.10.0.106 |
MicPlug Sensor sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMicPlugSensorError |
1.3.6.1.4.1.5528.100.10.2.10.0.1 |
MicPlug Sensor sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMicPlugSensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.10.0.101 |
MicPlug Sensor sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMicPlugSensorValueError |
1.3.6.1.4.1.5528.100.10.2.10.0.10 |
MicPlug Sensor sensor value error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSpeakerPlugSensorReplugged |
1.3.6.1.4.1.5528.100.10.2.11.0.106 |
SpeakerPlug Sensor sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSpeakerPlugSensorError |
1.3.6.1.4.1.5528.100.10.2.11.0.1 |
SpeakerPlug Sensor sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSpeakerPlugSensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.11.0.101 |
SpeakerPlug Sensor sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTVSignalSensorReplugged |
1.3.6.1.4.1.5528.100.10.2.12.0.106 |
TVSignal Sensor sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTVSignalSensorError |
1.3.6.1.4.1.5528.100.10.2.12.0.1 |
TVSignal Sensor sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzTVSignalSensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.12.0.101 |
TVSignal Sensor sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPodUnplugged |
1.3.6.1.4.1.5528.100.10.3.0.7 |
Pod unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPodReplugged |
1.3.6.1.4.1.5528.100.10.3.0.107 |
Pod no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSensorPodUnplugged |
1.3.6.1.4.1.5528.100.10.3.2.0.7 |
Sensor Pod unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSensorPodReplugged |
1.3.6.1.4.1.5528.100.10.3.2.0.107 |
Sensor Pod no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzCameraPodUnplugged |
1.3.6.1.4.1.5528.100.10.3.3.0.7 |
Camera Pod unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzCameraPodReplugged |
1.3.6.1.4.1.5528.100.10.3.3.0.107 |
Camera Pod no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzLogonError |
1.3.6.1.4.1.5528.100.10.3.0.11 |
Multiple failed logon attempts. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzLogonErrorResolved |
1.3.6.1.4.1.5528.100.10.3.0.111 |
Failed logon attempts stopped, or logon succeeded. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzDriveNotFoundError |
1.3.6.1.4.1.5528.100.10.3.0.12 |
Configured add-on drive not found or has malfunctioned. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionTooHigh |
1.3.6.1.4.1.5528.100.10.2.13.0.2 |
GPS Position sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.13.0.102 |
GPS Position sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionUnplugged |
1.3.6.1.4.1.5528.100.10.2.13.0.6 |
GPS Position sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionReplugged |
1.3.6.1.4.1.5528.100.10.2.13.0.106 |
GPS Position sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionError |
1.3.6.1.4.1.5528.100.10.2.13.0.1 |
GPS Position sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSPositionErrorRTN |
1.3.6.1.4.1.5528.100.10.2.13.0.101 |
GPS Position sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementTooHigh |
1.3.6.1.4.1.5528.100.10.2.14.0.2 |
GPS Movement sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.14.0.102 |
GPS Movement sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementUnplugged |
1.3.6.1.4.1.5528.100.10.2.14.0.6 |
GPS Movement sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementReplugged |
1.3.6.1.4.1.5528.100.10.2.14.0.106 |
GPS Movement sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementError |
1.3.6.1.4.1.5528.100.10.2.14.0.1 |
GPS Movement sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSMovementErrorRTN |
1.3.6.1.4.1.5528.100.10.2.14.0.101 |
GPS Movement sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropTooHigh |
1.3.6.1.4.1.5528.100.10.2.23.0.2 |
Packet Drop sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.23.0.102 |
Packet Drop sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropUnplugged |
1.3.6.1.4.1.5528.100.10.2.23.0.6 |
Packet Drop sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropReplugged |
1.3.6.1.4.1.5528.100.10.2.23.0.106 |
Packet Drop sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropError |
1.3.6.1.4.1.5528.100.10.2.23.0.1 |
Packet Drop sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzPacketDropErrorRTN |
1.3.6.1.4.1.5528.100.10.2.23.0.101 |
Packet Drop sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerTooHigh |
1.3.6.1.4.1.5528.100.10.2.24.0.2 |
SNMP Crawler sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.24.0.102 |
SNMP Crawler sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerUnplugged |
1.3.6.1.4.1.5528.100.10.2.24.0.6 |
SNMP Crawler sensor unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerReplugged |
1.3.6.1.4.1.5528.100.10.2.24.0.106 |
SNMP Crawler sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerError |
1.3.6.1.4.1.5528.100.10.2.24.0.1 |
SNMP Crawler sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzSNMPCrawlerErrorRTN |
1.3.6.1.4.1.5528.100.10.2.24.0.101 |
SNMP Crawler sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSStatusSensorReplugged |
1.3.6.1.4.1.5528.100.10.2.15.0.106 |
GPS Status Sensor sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSStatusSensorError |
1.3.6.1.4.1.5528.100.10.2.15.0.1 |
GPS Status Sensor sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzGPSStatusSensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.15.0.101 |
GPS Status Sensor sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMultiRAESensorTooHigh |
1.3.6.1.4.1.5528.100.10.2.27.0.2 |
MultiRAE sensor value too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMultiRAESensorTooHighRTN |
1.3.6.1.4.1.5528.100.10.2.27.0.102 |
MultiRAE sensor value is not longer too high. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMultiRAESensorReplugged |
1.3.6.1.4.1.5528.100.10.2.27.0.106 |
MultiRAE sensor no longer unplugged. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMultiRAESensorError |
1.3.6.1.4.1.5528.100.10.2.27.0.1 |
MultiRAE sensor error. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|
netBotzMultiRAESensorErrorRTN |
1.3.6.1.4.1.5528.100.10.2.27.0.101 |
MultiRAE sensor error resolved. |
Status: current |
Access: read-only |
NOTIFICATION-TYPE |
|
|
|