NBS-OTNOH-MIB

File: NBS-OTNOH-MIB.mib (6316 bytes)

Imported modules

SNMPv2-SMI SNMPv2-TC IF-MIB
NBS-MIB

Imported symbols

OBJECT-TYPE MODULE-IDENTITY OBJECT-IDENTITY
RowStatus InterfaceIndex nbs

Defined Types

NbsOtnohTtiEntry  
SEQUENCE    
  nbsOtnohTtiIfIndex InterfaceIndex
  nbsOtnohTtiScope INTEGER
  nbsOtnohTtiSendSapi STRING
  nbsOtnohTtiSendDapi STRING
  nbsOtnohTtiSendOpSpec STRING
  nbsOtnohTtiExpectSapi STRING
  nbsOtnohTtiExpectDapi STRING
  nbsOtnohTtiExpectOpSpec STRING
  nbsOtnohTtiRowStatus RowStatus

Defined Values

nbsOtnohMib 1.3.6.1.4.1.629.224
OTN/SONET Overhead fields
MODULE-IDENTITY    

nbsOtnohTtiGrp 1.3.6.1.4.1.629.224.1
OTN overhead fields
OBJECT-IDENTITY    

nbsOtnohTtiTable 1.3.6.1.4.1.629.224.1.1
OTN Trail Trace Identifier values
OBJECT-TYPE    
  SEQUENCE OF  
    NbsOtnohTtiEntry

nbsOtnohTtiEntry 1.3.6.1.4.1.629.224.1.1.1
Trail Trace Identifier (TTI) values for a particular interface. Per ITU-T G.709, a TTI has 64 bytes; the first 16 contain the Source Access Point Identifer (SAPI), the next 16 contain the Destination Access Point Identifer (SAPI), and the final 32 contain an Operator Specific value. For the SAPI and DAPI, the first byte is all zero, and the other fifteen are seven-bit International Reference Alphabet (IRA) characters; ACSII is the USA variant. There is a three character international segment field followed by a twelve character national segment field, which consists of two subfields: the ITU carrier code (ICC) and a unique access point code (UAPC).
OBJECT-TYPE    
  NbsOtnohTtiEntry  

nbsOtnohTtiIfIndex 1.3.6.1.4.1.629.224.1.1.1.1
The mib2 ifIndex
OBJECT-TYPE    
  InterfaceIndex  

nbsOtnohTtiScope 1.3.6.1.4.1.629.224.1.1.1.2
This object specifies the TTI field that the following row values apply.
OBJECT-TYPE    
  INTEGER tcm1(1), tcm2(2), tcm3(3), tcm4(4), tcm5(5), tcm6(6), section(7), path(8)  

nbsOtnohTtiSendSapi 1.3.6.1.4.1.629.224.1.1.1.3
This object specifies the Source Access Point Identifier (SAPI) byte value(s) to send in the selected TTI field of outgoing OTN frames. There are sixteen bytes in the SAPI. Any bytes unspecified by this string will be set to zero.
OBJECT-TYPE    
  STRING Size(0..16)  

nbsOtnohTtiSendDapi 1.3.6.1.4.1.629.224.1.1.1.4
This object specifies the Destination Access Point Identifier (DAPI) byte value(s) to send in the selected TTI field of outgoing OTN frames. There are sixteen bytes in the DAPI. Any bytes unspecified by this string will be set to zero.
OBJECT-TYPE    
  STRING Size(0..16)  

nbsOtnohTtiSendOpSpec 1.3.6.1.4.1.629.224.1.1.1.5
This object specifies the Operator Specfic byte value(s) to send in the selected TTI field of outgoing OTN frames. There are thirty-two bytes in the SAPI. Any bytes unspecified by this string will be set to zero.
OBJECT-TYPE    
  STRING Size(0..32)  

nbsOtnohTtiExpectSapi 1.3.6.1.4.1.629.224.1.1.1.6
This object specifies the sixteen byte Source Access Point Identifier (SAPI) value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no SAPI matching is desired.
OBJECT-TYPE    
  STRING Size(0..16)  

nbsOtnohTtiExpectDapi 1.3.6.1.4.1.629.224.1.1.1.7
This object specifies the sixteen byte Destination Access Point Identifier (DAPI) value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no DAPI matching is desired.
OBJECT-TYPE    
  STRING Size(0..16)  

nbsOtnohTtiExpectOpSpec 1.3.6.1.4.1.629.224.1.1.1.8
This object specifies the thirty-two byte Operator Specfic value to expect in the selected TTI field of incoming OTN frames. A zero length octet string indicates no Operator Specfic matching is desired.
OBJECT-TYPE    
  STRING Size(0..32)  

nbsOtnohTtiRowStatus 1.3.6.1.4.1.629.224.1.1.1.10
Used to add/remove the configuration of a network segment
OBJECT-TYPE    
  RowStatus