Motorola-Cpe-PRIVATE-MIB

File: Motorola-Cpe-PRIVATE-MIB.mib (93124 bytes)

Imported modules

SNMPv2-TC IF-MIB SNMPv2-SMI

Imported symbols

DisplayString DateAndTime RowStatus
ifIndex ifAdminStatus ifOperStatus
MODULE-IDENTITY OBJECT-TYPE Unsigned32
enterprises Integer32 IpAddress
NOTIFICATION-TYPE

Defined Types

GemtekDevCpeChannelEntry  
SEQUENCE    
  gemtekDevCpeChannelIndex Integer32
  gemtekDevCpeChannelActive INTEGER
  gemtekDevCpeChannelFrequency Unsigned32
  gemtekDevCpeChannelBandwidth Integer32
  gemtekDevCpeChannelRssi OCTET STRING
  gemtekDevCpeChannelCinr OCTET STRING
  gemtekDevCpeChannelEntryEnable INTEGER
  gemtekDevCpeChannelRowstatus RowStatus
  gemtekDevCpeChannelBsId OCTET STRING
  gemtekDevCpeChannelPreambelIndex OCTET STRING

GemtekDevCpeCACertificateFileEntry  
SEQUENCE    
  gemtekDevCpeCACertificateIndex Integer32
  gemtekDevCpeCACertificateSize Unsigned32
  gemtekDevCpeCACertificateIssuer OCTET STRING
  gemtekDevCpeCAValidityDateBegin OCTET STRING
  gemtekDevCpeCAValidityDateEnd OCTET STRING
  gemtekDevCpeCACertificateSubject OCTET STRING

GemtekDevCpeUserCertificateFileEntry  
SEQUENCE    
  gemtekDevCpeUserCertificateIndex Integer32
  gemtekDevCpeUserCertificateSize Unsigned32
  gemtekDevCpeUserCertificateIssuer OCTET STRING
  gemtekDevCpeUserValidityDateBegin OCTET STRING
  gemtekDevCpeUserValidityDateEnd OCTET STRING
  gemtekDevCpeUserCertificateSubject OCTET STRING

GemtekDevCpeFirewallEntry  
SEQUENCE    
  gemtekDevCpeFirewallIndex Integer32
  gemtekDevCpeFirewallName OCTET STRING
  gemtekDevCpeFirewallAction INTEGER
  gemtekDevCpeFirewallInterface INTEGER
  gemtekDevCpeFirewallProtocol INTEGER
  gemtekDevCpeFirewallPriority INTEGER
  gemtekDevCpeFirewallEntryEnable INTEGER
  gemtekDevCpeFirewallSrcMac OCTET STRING
  gemtekDevCpeFirewallDstMac OCTET STRING
  gemtekDevCpeFirewallSrcIpAddress IpAddress
  gemtekDevCpeFirewallDstIpAddress IpAddress
  gemtekDevCpeFirewallSrcPortRangeBegin Integer32
  gemtekDevCpeFirewallSrcPortRangeEnd Integer32
  gemtekDevCpeFirewallDstPortRangeBegin Integer32
  gemtekDevCpeFirewallDstPortRangeEnd Integer32
  gemtekDevCpeFirewallRowstatus RowStatus

GemtekDevCpeServiceFlowEntry  
SEQUENCE    
  gemtekDevCpeServiceFlowIndex Integer32
  gemtekDevCpeServiceFlowSFID Unsigned32
  gemtekDevCpeServiceFlowCID Unsigned32
  gemtekDevCpeServiceFlowBCID Unsigned32
  gemtekDevCpeServiceFlowType INTEGER
  gemtekDevCpeServiceFlowState INTEGER
  gemtekDevCpeServiceFlowDirection INTEGER
  gemtekDevCpeServiceFlowEnable INTEGER
  gemtekDevCpeServiceFlowScheduling INTEGER
  gemtekDevCpeServiceFlowMaxRate Unsigned32
  gemtekDevCpeServiceFlowARQ INTEGER
  gemtekDevCpeServiceFlowHARQ INTEGER
  gemtekDevCpeServiceFlowRules Unsigned32

GemtekDevCpeVlanMembershipEntry  
SEQUENCE    
  gemtekDevCpeVlanMembershipIndex Integer32
  gemtekDevCpeVlanMembershipVidBegin Unsigned32
  gemtekDevCpeVlanMembershipVidEnd Unsigned32
  gemtekDevCpeVlanMembershipVidRowstatus RowStatus

GemtekDevCpeDhcpServerPermanentHostEntry  
SEQUENCE    
  gemtekDevCpeDhcpServerPermanentHostIndex Integer32
  gemtekDevCpeDhcpServerPermanentHostMac OCTET STRING
  gemtekDevCpeDhcpServerPermanentHostIp IpAddress
  gemtekDevCpeDhcpServerPermanentHostEntryEnable INTEGER
  gemtekDevCpeDhcpServerPermanentRowstatus RowStatus

GemtekDevCpePortForwardingEntry  
SEQUENCE    
  gemtekDevCpePortForwardingIndex Integer32
  gemtekDevCpePortForwardingWanPortBegin Integer32
  gemtekDevCpePortForwardingWanPortEnd Integer32
  gemtekDevCpePortForwardingLanIp IpAddress
  gemtekDevCpePortForwardingLanPortBegin Integer32
  gemtekDevCpePortForwardingLanPortEnd Integer32
  gemtekDevCpePortForwardingProtocol INTEGER
  gemtekDevCpePortForwardingEntryEnable INTEGER
  gemtekDevCpePortForwardingRowstatus RowStatus

GemtekDevCpePortTriggerEntry  
SEQUENCE    
  gemtekDevCpePortTriggerIndex Integer32
  gemtekDevCpePortTriggerName OCTET STRING
  gemtekDevCpePortTriggerTriggerPortBegin Integer32
  gemtekDevCpePortTriggerTriggerPortEnd Integer32
  gemtekDevCpePortTriggerForwardingPortBegin Integer32
  gemtekDevCpePortTriggerForwardingPortEnd Integer32
  gemtekDevCpePortTriggerProtocol INTEGER
  gemtekDevCpePortTriggerEntryEnable INTEGER
  gemtekDevCpePortTriggerRowstatus RowStatus

GemtekDevCpeDhcpClentListEntry  
SEQUENCE    
  gemtekDevCpeDhcpClentListIndex Integer32
  gemtekDevCpeDhcpClentListIp IpAddress
  gemtekDevCpeDhcpClentListMacAddress OCTET STRING
  gemtekDevCpeDhcpClentListExpireTime OCTET STRING

Defined Values

gemtekDevCpe 1.3.6.1.4.1.10529.300
PMP 320 CPE MIB tree
MODULE-IDENTITY    

gemtek 1.3.6.1.4.1.10529
OBJECT IDENTIFIER    

gemtekDevCpeStatus 1.3.6.1.4.1.10529.300.1
OBJECT IDENTIFIER    

gemtekDevCpeControl 1.3.6.1.4.1.10529.300.2
OBJECT IDENTIFIER    

gemtekDevCpeTrap 1.3.6.1.4.1.10529.300.3
OBJECT IDENTIFIER    

gemtekDevCpeDate 1.3.6.1.4.1.10529.300.4
OBJECT IDENTIFIER    

gemtekDevCpeAccountManagement 1.3.6.1.4.1.10529.300.5
OBJECT IDENTIFIER    

gemtekDevCpeScanner 1.3.6.1.4.1.10529.300.6
OBJECT IDENTIFIER    

gemtekDevCpeAuthentication 1.3.6.1.4.1.10529.300.7
OBJECT IDENTIFIER    

gemtekDevCpeNetworkMode 1.3.6.1.4.1.10529.300.8
OBJECT IDENTIFIER    

gemtekDevCpeFirewall 1.3.6.1.4.1.10529.300.9
OBJECT IDENTIFIER    

gemtekDevCpeServiceFlow 1.3.6.1.4.1.10529.300.11
OBJECT IDENTIFIER    

gemtekDevCpeSyslog 1.3.6.1.4.1.10529.300.12
OBJECT IDENTIFIER    

gemtekDevCpeMaxTxPower 1.3.6.1.4.1.10529.300.13
OBJECT IDENTIFIER    

gemtekDevCpePullFtpUpgrade 1.3.6.1.4.1.10529.300.21
OBJECT IDENTIFIER    

gemtekDevCpePushFtpUpgrade 1.3.6.1.4.1.10529.300.22
OBJECT IDENTIFIER    

gemtekDevCpeTftpUpgrade 1.3.6.1.4.1.10529.300.69
OBJECT IDENTIFIER    

wirelessStatus 1.3.6.1.4.1.10529.300.1.1
OBJECT IDENTIFIER    

networkStatus 1.3.6.1.4.1.10529.300.1.2
OBJECT IDENTIFIER    

deviceStatus 1.3.6.1.4.1.10529.300.1.3
OBJECT IDENTIFIER    

rebootWithResponse 1.3.6.1.4.1.10529.300.2.1
If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0).
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER rebootRequired(1), rebootNotRequired(0), reboot(255)  

isRebootRequired 1.3.6.1.4.1.10529.300.2.2
If reading this OID, rebootRequired(1) indicates a reboot is currently required, else, returns rebootNotRequired(0).
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER rebootRequired(1), rebootNotRequired(0)  

autoSaveConfig 1.3.6.1.4.1.10529.300.2.3
OID to enable/disable the system save to flash automatically. Change setting will save configuraition immediately. Set autoSaveConfig = 0 can save configuraition immediately and don't turn on auto save.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER autoSaveEnabled(1), autoSaveDisabled(0)  

autoSavePeriod 1.3.6.1.4.1.10529.300.2.4
The variable is deprecated. An OID to set the auto save period in seconds.
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

startStopWimax 1.3.6.1.4.1.10529.300.2.5
Start/Stop WiMAX
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER start(1), stop(0)  

snmpBuzzerConfig 1.3.6.1.4.1.10529.300.2.6
OID to enable/disable/demo the system buzzer.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER snmpBuzzerDisabled(0), snmpBuzzerEnabled(1), snmpBuzzerDemo(2)  

snmpBuzzerDisableDelay 1.3.6.1.4.1.10529.300.2.7
An OID to set the auto disable the buzzer in how many seconds after CPE operational.(0~1800)
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeSnmpReadCommunity 1.3.6.1.4.1.10529.300.2.8
An OID to set/get the SNMP Read community.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeSnmpSetCommunity 1.3.6.1.4.1.10529.300.2.9
An OID to set/get the SNMP Set community.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeRestFactoryDefault 1.3.6.1.4.1.10529.300.2.10
Reset to factory default setting.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeAutoFirmwareRollback 1.3.6.1.4.1.10529.300.2.11
Auto firmware rollback Disable/Level 1/Level 2.(default:Disable)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), levelOne(1), levelTwo(2)  

gemtekDevCpeFirmwareValidationTime 1.3.6.1.4.1.10529.300.2.12
Auto firmware rollback Level 1: The duration of firmware validation test time(0~99999 seconds).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeFirmwareValidationCount 1.3.6.1.4.1.10529.300.2.13
Auto firmware rollback Level 2: Failure count in firmware validation test(0~999).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeSnmpAccessFromLan 1.3.6.1.4.1.10529.300.2.14
Allow SNMP access from LAN enabled/disabled.(Default:disabled) Setting will take effect immediately.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDynamicMaxTxPowerBpsk 1.3.6.1.4.1.10529.300.2.15
BPSK Dynamic Max Tx Power(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeDynamicMaxTxPowerQpsk 1.3.6.1.4.1.10529.300.2.16
QPSK Dynamic Max Tx Power(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeDynamicMaxTxPowerQam16 1.3.6.1.4.1.10529.300.2.17
QAM16 Dynamic Max Tx Power(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeDynamicMaxTxPowerQam64 1.3.6.1.4.1.10529.300.2.18
QAM64 Dynamic Max Tx Power(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeSnmpAccessDomain 1.3.6.1.4.1.10529.300.2.19
OBJECT IDENTIFIER    

gemtekDevCpeSnmpAccessDomainEnable 1.3.6.1.4.1.10529.300.2.19.1
Enable/Disable SNMP access domain(Default:Disable) Setting will take effect until save and reboot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeSnmpAccessDomainIp 1.3.6.1.4.1.10529.300.2.19.2
SNMP access domain IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeSnmpAccessDomainNetmask 1.3.6.1.4.1.10529.300.2.19.3
SNMP access domain netmask EX: gemtekDevCpeSnmpAccessDomainIp = 192.168.1.1 gemtekDevCpeSnmpAccessDomainNetmask = 255.255.255.0 SNMP access domain = 192.168.1.0
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeTrapServer 1.3.6.1.4.1.10529.300.3.1
OBJECT IDENTIFIER    

gemtekDevCpeTrapPrefix 1.3.6.1.4.1.10529.300.3.2
OBJECT IDENTIFIER    

gemtekDevCpeSystemDate 1.3.6.1.4.1.10529.300.4.1
CPE system Date
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gemtekDevCpeNtpServerEnable 1.3.6.1.4.1.10529.300.4.2
NTP Server Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeNtpServer 1.3.6.1.4.1.10529.300.4.3
NTP Server configuration
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

gemtekDevCpeNtpServerFromDHCP 1.3.6.1.4.1.10529.300.4.4
NTP Server From DHCP
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeTimeZone 1.3.6.1.4.1.10529.300.4.5
CPE Time Zone configuration: 0 (GMT-12:00) International Date Line West , 1 (GMT-11:00) Midway Island, Samoa , 2 (GMT-10:00) Hawaii , 3 (GMT-09:00) Alaska , 4 (GMT-08:00) Pacific Time (US and Canada) , 5 (GMT-08:00) Tijuana, Baja California , 6 (GMT-07:00) Arizona , 7 (GMT-07:00) Chihuahua, La Paz, Mazatlan - New , 8 (GMT-07:00) Chihuahua, La Paz, Mazatlan - Old , 9 (GMT-07:00) Mountain Time (US and Canada) , 10 (GMT-06:00) Central America , 11 (GMT-06:00) Central Time (US and Canada) , 12 (GMT-06:00) Guadalajara, Mexico City, Monterrey - New , 13 (GMT-06:00) Guadalajara, Mexico City, Monterrey - Old , 14 (GMT-06:00) Saskatchewan , 15 (GMT-05:00) Bogota, Lima, Quito, Rio Branco , 16 (GMT-05:00) Eastern Time (US and Canada) , 17 (GMT-05:00) Indiana (East) , 18 (GMT-04:30) Caracas , 19 (GMT-04:00) Atlantic Time (Canada) , 20 (GMT-04:00) Caracas, La Paz , 21 (GMT-04:00) Manaus , 22 (GMT-04:00) Santiago , 23 (GMT-03:30) Newfoundland , 24 (GMT-03:00) Brasilia , 25 (GMT-03:00) Buenos Aires, Georgetown , 26 (GMT-03:00) Greenland , 27 (GMT-03:00) Montevideo , 28 (GMT-02:00) Mid-Atlantic , 29 (GMT-01:00) Azores , 30 (GMT-01:00) Cape Verde Is. , 31 (GMT) Casablanca, Monrovia, Reykjavik , 32 (GMT) Greenwich Mean Time - Dublin, Edinburgh, Lisbon, London , 33 (GMT+01:00) Amsterdam, Berlin, Bern, Rome, Stockholm, Vienna , 34 (GMT+01:00) Belgrade, Bratislava, Budapest, Ljubljana, Prague , 35 (GMT+01:00) Brussels, Copenhagen, Madrid, Paris , 36 (GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb , 37 (GMT+01:00) West Central Africa , 38 (GMT+02:00) Amman , 39 (GMT+02:00) Athens, Bucharest, Istanbul , 40 (GMT+02:00) Beirut , 41 (GMT+02:00) Cairo , 42 (GMT+02:00) Harare, Pretoria , 43 (GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius , 44 (GMT+02:00) Jerusalem , 45 (GMT+02:00) Minsk , 46 (GMT+02:00) Windhoek , 47 (GMT+03:00) Baghdad , 48 (GMT+03:00) Kuwait, Riyadh , 49 (GMT+03:00) Moscow, St. Petersburg, Volgograd , 50 (GMT+03:00) Nairobi , 51 (GMT+03:00) Tbilisi , 52 (GMT+03:30) Tehran , 53 (GMT+04:00) Abu Dhabi, Muscat , 54 (GMT+04:00) Baku , 55 (GMT+04:00) Caucasus Standard Time , 56 (GMT+04:00) Yerevan , 57 (GMT+04:30) Kabul , 58 (GMT+05:00) Yekaterinburg , 59 (GMT+05:00) Islamabad, Karachi, Tashkent , 60 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi , 61 (GMT+05:30) Sri Jayawardenapura-Kotte , 62 (GMT+05:45) Kathmandu , 63 (GMT+06:00) Almaty, Novosibirsk , 64 (GMT+06:00) Astana, Dhaka , 65 (GMT+06:30) Yangon (Rangoon) , 66 (GMT+07:00) Bangkok, Hanoi, Jakarta , 67 (GMT+07:00) Krasnoyarsk , 68 (GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi , 69 (GMT+08:00) Irkutsk, Ulaan Bataar , 70 (GMT+08:00) Kuala Lumpur, Singapore , 71 (GMT+08:00) Perth , 72 (GMT+08:00) Taipei , 73 (GMT+09:00) Osaka, Sapporo, Tokyo , 74 (GMT+09:00) Seoul , 75 (GMT+09:00) Yakutsk , 76 (GMT+09:30) Adelaide , 77 (GMT+09:30) Darwin , 78 (GMT+10:00) Brisbane , 79 (GMT+10:00) Canberra, Melbourne, Sydney , 80 (GMT+10:00) Guam, Port Moresby , 81 (GMT+10:00) Hobart , 82 (GMT+10:00) Vladivostok , 83 (GMT+11:00) Magadan, Solomon Is., New Caledonia , 84 (GMT+12:00) Auckland, Wellington , 85 (GMT+12:00) Fiji, Kamchatka, Marshall Is. , 86 (GMT+13:00) Nuku`alofa
Status: current Access: read-write
OBJECT-TYPE    
  Integer32 0..86  

gemtekDevCpeDaylightSaving 1.3.6.1.4.1.10529.300.4.6
Daylight Saving Enable configuration
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

administratorUsername 1.3.6.1.4.1.10529.300.5.1
set/get WEB administrator username
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

administratorPassword 1.3.6.1.4.1.10529.300.5.2
set-only WEB administrator password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

administratorEnable 1.3.6.1.4.1.10529.300.5.3
set/get WEB administrator eabled/disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

operatorUsername 1.3.6.1.4.1.10529.300.5.4
set/get WEB operator username
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

operatorPassword 1.3.6.1.4.1.10529.300.5.5
set-only WEB operator password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

operatorEnable 1.3.6.1.4.1.10529.300.5.6
set/get WEB operator eabled/disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

adminUsername 1.3.6.1.4.1.10529.300.5.7
set/get WEB admin username
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

adminPassword 1.3.6.1.4.1.10529.300.5.8
set-only WEB admin password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

adminEnable 1.3.6.1.4.1.10529.300.5.9
set/get WEB admin eabled/disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeChannelBandwidthRang 1.3.6.1.4.1.10529.300.6.1
No function for this OID since f03b00-5.8.8Moto Select the Channel Bandwidth Rang. 0: threeToFive 3MHz ~ 5MHz => 3MHz, 3.5MHz, 5MHz 1: sixToTen 6MHz ~ 10MHz => 6MHz, 7MHz, 8.75MHz, 10MHz
Status: deprecated Access: read-write
OBJECT-TYPE    
  INTEGER threeToFive(0), sixToTen(1)  

gemtekDevCpeChannelApplyLoadOrSave 1.3.6.1.4.1.10529.300.6.2
Channel Scanner Setting load or save (defualut:0). Saved channel Table will take effect until reboot.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER load(0), save(1)  

gemtekDevCpeChannelTable 1.3.6.1.4.1.10529.300.6.3
Channel Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeChannelEntry

gemtekDevCpeFrequencyRangeSetting 1.3.6.1.4.1.10529.300.6.4
OBJECT IDENTIFIER    

gemtekDevCpeAPPreferredList 1.3.6.1.4.1.10529.300.6.5
OBJECT IDENTIFIER    

gemtekDevCpeLockFrequencyRangeMin 1.3.6.1.4.1.10529.300.6.4.1
CPE lock frequency range Min(kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeLockFrequencyRangeMax 1.3.6.1.4.1.10529.300.6.4.2
CPE lock frequency range Max(kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeLockFrequencyRange 1.3.6.1.4.1.10529.300.6.4.3
Lock/Unlock frequency range state.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER unlock(0), lock(1)  

gemtekDevCpeModelFrequencyRangeMin 1.3.6.1.4.1.10529.300.6.4.4
CPE model frequency range Min(kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeModelFrequencyRangeMax 1.3.6.1.4.1.10529.300.6.4.5
CPE Model frequency range Max(kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeAPPreferredSelectionEnable 1.3.6.1.4.1.10529.300.6.5.1
AP Preferred Selection eabled/disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeAPPreferredBsIdListLocked 1.3.6.1.4.1.10529.300.6.5.2
Configured BsId List Locked eabled/disabled
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeAPPreferredPriorityOneBsId 1.3.6.1.4.1.10529.300.6.5.3
Priority 1 BsId Address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeAPPreferredPriorityTwoBsId 1.3.6.1.4.1.10529.300.6.5.4
Priority 2 BsId Address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeAPPreferredPriorityThreeBsId 1.3.6.1.4.1.10529.300.6.5.5
Priority 3 BsId Address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeAPPreferredPriorityFourBsId 1.3.6.1.4.1.10529.300.6.5.6
Priority 4 BsId Address
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeChannelEntry 1.3.6.1.4.1.10529.300.6.3.1
Channel Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeChannelEntry  

gemtekDevCpeChannelIndex 1.3.6.1.4.1.10529.300.6.3.1.1
Channel Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeChannelActive 1.3.6.1.4.1.10529.300.6.3.1.2
Channel Active/Disactive
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disactive(0), active(1)  

gemtekDevCpeChannelFrequency 1.3.6.1.4.1.10529.300.6.3.1.3
Channel Frequency configuration (kHz)
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeChannelBandwidth 1.3.6.1.4.1.10529.300.6.3.1.4
Channel Bandwidth configuration(kHz) 3.5MHz = 3500kHz 5MHz = 5000kHz 7MHz = 7000kHz 10MHz = 10000kHz
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeChannelRssi 1.3.6.1.4.1.10529.300.6.3.1.5
Channel RSSI (dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeChannelCinr 1.3.6.1.4.1.10529.300.6.3.1.6
Channel CINR(dB)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeChannelEntryEnable 1.3.6.1.4.1.10529.300.6.3.1.7
Channel Entry Enable(Disable/Enable)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeChannelRowstatus 1.3.6.1.4.1.10529.300.6.3.1.8
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpeChannelBsId 1.3.6.1.4.1.10529.300.6.3.1.9
Channel Bs Id
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeChannelPreambelIndex 1.3.6.1.4.1.10529.300.6.3.1.10
Channel Preamble Index
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeAuthenticationSelectionPhase1 1.3.6.1.4.1.10529.300.7.1
Authentication Selection Phase1(None/EAP-TLS/EAP-TTLS) EAP-TLS needs at least one Device certificate file. Please upload a device certificate file to CPE then you can set EAP-TLS.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER none(0), eapTtls(1), eapTls(2)  

eapIdentityType 1.3.6.1.4.1.10529.300.7.2
EAP-TLS/EAP-TTLS Identity type 0: no Identity(Use realm) 1: manaul Identity 2: random Identity
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER noIdentity(0), manaulIdentity(1), randomIdentity(2)  

eapIdentityUseRealm 1.3.6.1.4.1.10529.300.7.3
EAP-TLS/EAP-TTLS Identity use realm Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eapIdentityString 1.3.6.1.4.1.10529.300.7.4
EAP-TLS/EAP-TTLS Identity String configuration
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

eapRealmString 1.3.6.1.4.1.10529.300.7.5
EAP-TLS/EAP-TTLS Identity String configuration
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

eapValidateTheDateDurationOfCaCertificate 1.3.6.1.4.1.10529.300.7.6
EAP-TLS/EAP-TTLS Validate the date duration of CA certificate(Disable/Enable)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eapValidateTheServerCertificate 1.3.6.1.4.1.10529.300.7.7
EAP-TLS/EAP-TTLS Validate the server certificate(Disable/Enable) It needs at least one CA certificate file. Please upload a CA certificate file to CPE then you can set it enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeAuthenticationEAPTLS 1.3.6.1.4.1.10529.300.7.8
OBJECT IDENTIFIER    

gemtekDevCpeAuthenticationEAPTTLS 1.3.6.1.4.1.10529.300.7.9
OBJECT IDENTIFIER    

gemtekDevCpeCertificationFileManagement 1.3.6.1.4.1.10529.300.7.10
OBJECT IDENTIFIER    

gemtekDevCpeCertificateUpload 1.3.6.1.4.1.10529.300.7.10.1
OBJECT IDENTIFIER    

gemtekDevCpeCACertificateFileName 1.3.6.1.4.1.10529.300.7.10.1.1
specify the CA certificate file name on the FTP server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

gemtekDevCpeCACertificateFileUpload 1.3.6.1.4.1.10529.300.7.10.1.2
check and upload the CA certificate file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), upload(1)  

gemtekDevCpeUserCertificateFileName 1.3.6.1.4.1.10529.300.7.10.1.3
specify the user certificate file name on the FTP server.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(1..32)  

gemtekDevCpeUserCertificateFileUpload 1.3.6.1.4.1.10529.300.7.10.1.4
check and upload the user certificate file.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), upload(1)  

gemtekDevCpeCACertificateFileDelete 1.3.6.1.4.1.10529.300.7.10.2
delete the CA certificate file. Validate the server certificate needs at least one CA certificate file. If you delete all CA certificate files, it will change eapValidateTheServerCertificate to disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fileOne(1), fileTwo(2)  

gemtekDevCpeUserCertificateFileDelete 1.3.6.1.4.1.10529.300.7.10.3
delete the user certificate file. EAP-TLS needs at least one device certificate file. If you delete all user certificate files, it will change gemtekDevCpeAuthenticationSelectionPhase1 to EAP-TTLS, and use device certificate disabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER fileOne(1), fileTwo(2)  

gemtekDevCpeCACertificateFileTable 1.3.6.1.4.1.10529.300.7.10.4
CA certificate file table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeCACertificateFileEntry

gemtekDevCpeCACertificateFileEntry 1.3.6.1.4.1.10529.300.7.10.4.1
CA certificate file entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeCACertificateFileEntry  

gemtekDevCpeCACertificateIndex 1.3.6.1.4.1.10529.300.7.10.4.1.1
CA certificate file Table Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeCACertificateSize 1.3.6.1.4.1.10529.300.7.10.4.1.2
CA certificate file size(Byte)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeCACertificateIssuer 1.3.6.1.4.1.10529.300.7.10.4.1.3
CA certificate file issuer
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpeCAValidityDateBegin 1.3.6.1.4.1.10529.300.7.10.4.1.4
CA certificate file validity date begin
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeCAValidityDateEnd 1.3.6.1.4.1.10529.300.7.10.4.1.5
CA certificate file validity date end
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeCACertificateSubject 1.3.6.1.4.1.10529.300.7.10.4.1.6
CA certificate file subject
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpeUserCertificateFileTable 1.3.6.1.4.1.10529.300.7.10.5
User certificate file table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeUserCertificateFileEntry

gemtekDevCpeUserCertificateFileEntry 1.3.6.1.4.1.10529.300.7.10.5.1
User certificate file entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeUserCertificateFileEntry  

gemtekDevCpeUserCertificateIndex 1.3.6.1.4.1.10529.300.7.10.5.1.1
User certificate file Table Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeUserCertificateSize 1.3.6.1.4.1.10529.300.7.10.5.1.2
User certificate file size(Byte)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeUserCertificateIssuer 1.3.6.1.4.1.10529.300.7.10.5.1.3
User certificate file issuer
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpeUserValidityDateBegin 1.3.6.1.4.1.10529.300.7.10.5.1.4
User certificate file validity date begin
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeUserValidityDateEnd 1.3.6.1.4.1.10529.300.7.10.5.1.5
User certificate file validity date end
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeUserCertificateSubject 1.3.6.1.4.1.10529.300.7.10.5.1.6
User certificate file subject
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpeNetoworkOperatingMode 1.3.6.1.4.1.10529.300.8.1
Netowork Operating Mode(Bridge/NAT)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER nat(0), bridge(1)  

gemtekDevCpeBridgeMode 1.3.6.1.4.1.10529.300.8.2
OBJECT IDENTIFIER    

gemtekDevCpeNatMode 1.3.6.1.4.1.10529.300.8.3
OBJECT IDENTIFIER    

gemtekDevCpeAllowWebAccessingFromWan 1.3.6.1.4.1.10529.300.9.1
Allow Web Accessing From WAN(disable/enable)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeAllowTelnetAccessingFromWan 1.3.6.1.4.1.10529.300.9.2
Allow Telnet Accessing From WAN(disable/enable)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDmzEnable 1.3.6.1.4.1.10529.300.9.3
DMZ Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDmzIpAddress 1.3.6.1.4.1.10529.300.9.4
DMZ IP Address
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeRedirectIcmpToTheDmzHostEnable 1.3.6.1.4.1.10529.300.9.5
Redirect ICMP packets to the DMZ host Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEnable 1.3.6.1.4.1.10529.300.9.6
Firewall Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallTable 1.3.6.1.4.1.10529.300.9.7
Firewall Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeFirewallEntry

gemtekDevCpeFirewallEntry 1.3.6.1.4.1.10529.300.9.7.1
Firewall Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeFirewallEntry  

gemtekDevCpeFirewallIndex 1.3.6.1.4.1.10529.300.9.7.1.1
Firewall Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeFirewallName 1.3.6.1.4.1.10529.300.9.7.1.2
Firewall Name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING  

gemtekDevCpeFirewallAction 1.3.6.1.4.1.10529.300.9.7.1.3
Firewall Action(Deny/Allow)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER deny(0), allow(1)  

gemtekDevCpeFirewallInterface 1.3.6.1.4.1.10529.300.9.7.1.4
Firewall Interface(Ethernet/Wimax)
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER ethernet(0), wimax(1)  

gemtekDevCpeFirewallProtocol 1.3.6.1.4.1.10529.300.9.7.1.5
Firewall Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER any(0), icmp(1), tcp(6), udp(17)  

gemtekDevCpeFirewallPriority 1.3.6.1.4.1.10529.300.9.7.1.6
Firewall Entry Priority
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER hi(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8), nine(9), lo(10)  

gemtekDevCpeFirewallEntryEnable 1.3.6.1.4.1.10529.300.9.7.1.7
Firewall Entry Enable/Disable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallSrcMac 1.3.6.1.4.1.10529.300.9.7.1.8
Firewall Source MAC Address
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeFirewallDstMac 1.3.6.1.4.1.10529.300.9.7.1.9
Firewall Destination MAC Address
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..17)  

gemtekDevCpeFirewallSrcIpAddress 1.3.6.1.4.1.10529.300.9.7.1.10
Firewall Source IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeFirewallDstIpAddress 1.3.6.1.4.1.10529.300.9.7.1.11
Firewall Destination IP Address
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeFirewallSrcPortRangeBegin 1.3.6.1.4.1.10529.300.9.7.1.12
Firewall Source Port Range Begin(1~65535)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeFirewallSrcPortRangeEnd 1.3.6.1.4.1.10529.300.9.7.1.13
Firewall Source Port Range End(1~65535)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeFirewallDstPortRangeBegin 1.3.6.1.4.1.10529.300.9.7.1.14
Firewall Destination Port Range Begin(1~65535)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeFirewallDstPortRangeEnd 1.3.6.1.4.1.10529.300.9.7.1.15
Firewall Destination Port Range End(1~65535)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeFirewallRowstatus 1.3.6.1.4.1.10529.300.9.7.1.16
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpeTelnetEnable 1.3.6.1.4.1.10529.300.9.8
Telnet Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterOneEnable 1.3.6.1.4.1.10529.300.9.9
Firewall Ether-Type Filter Group One Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterOneTypeDeny 1.3.6.1.4.1.10529.300.9.10
Firewall Ether-Type Filter Group One Type Deny
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeFirewallEtherTypeFilterTwoEnable 1.3.6.1.4.1.10529.300.9.11
Firewall Ether-Type Filter Group Two Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterTwoTypeDeny 1.3.6.1.4.1.10529.300.9.12
Firewall Ether-Type Filter Group Two Type Deny
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeFirewallEtherTypeFilterThreeEnable 1.3.6.1.4.1.10529.300.9.13
Firewall Ether-Type Filter Group Three Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterThreeTypeDeny 1.3.6.1.4.1.10529.300.9.14
Firewall Ether-Type Filter Group Three Type Deny
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeFirewallEtherTypeFilterFourEnable 1.3.6.1.4.1.10529.300.9.15
Firewall Ether-Type Filter Group Four Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterFourTypeDeny 1.3.6.1.4.1.10529.300.9.16
Firewall Ether-Type Filter Group Four Type Deny
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeFirewallEtherTypeFilterFiveEnable 1.3.6.1.4.1.10529.300.9.17
Firewall Ether-Type Filter Group Five Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeFirewallEtherTypeFilterFiveTypeDeny 1.3.6.1.4.1.10529.300.9.18
Firewall Ether-Type Filter Group Five Type Deny
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..4)  

gemtekDevCpeFirewallPPPoEEnable 1.3.6.1.4.1.10529.300.9.19
PPPoE Enable/Disable (Only allow PPPoE traffic pass through)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeServiceFlowTable 1.3.6.1.4.1.10529.300.11.1
gemtekDevCpeServiceFlowTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeServiceFlowEntry

gemtekDevCpeServiceFlowEntry 1.3.6.1.4.1.10529.300.11.1.1
gemtekDevCpeServiceFlowEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeServiceFlowEntry  

gemtekDevCpeServiceFlowIndex 1.3.6.1.4.1.10529.300.11.1.1.1
Service Flow Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeServiceFlowSFID 1.3.6.1.4.1.10529.300.11.1.1.2
Service Flow SFID
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeServiceFlowCID 1.3.6.1.4.1.10529.300.11.1.1.3
Service Flow CID
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeServiceFlowBCID 1.3.6.1.4.1.10529.300.11.1.1.4
Service Flow Basic CID
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeServiceFlowType 1.3.6.1.4.1.10529.300.11.1.1.5
Service Flow Type: 0:basic 1:primary 2:secondary 3:data 4multicast
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER basic(0), primary(1), secondary(2), data(3), multicast(4)  

gemtekDevCpeServiceFlowState 1.3.6.1.4.1.10529.300.11.1.1.6
Service Flow State: 0:provisioned 1:admitted 2:active
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER provisioned(0), admitted(1), active(2)  

gemtekDevCpeServiceFlowDirection 1.3.6.1.4.1.10529.300.11.1.1.7
Service Flow Direction 1:uplink 2:downlink 3:bidirectional
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER uplink(1), downlink(2), bidirectional(3)  

gemtekDevCpeServiceFlowEnable 1.3.6.1.4.1.10529.300.11.1.1.8
Service Flow Enable/Disable
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER disable(0), enable(1)  

gemtekDevCpeServiceFlowScheduling 1.3.6.1.4.1.10529.300.11.1.1.9
Service Flow Scheduling type
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER bestEffort(2), nrtps(3), rtps(4), ertps(5), ugs(6)  

gemtekDevCpeServiceFlowMaxRate 1.3.6.1.4.1.10529.300.11.1.1.10
Service Flow Max Rate(bit/s)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeServiceFlowARQ 1.3.6.1.4.1.10529.300.11.1.1.11
Service Flow ARQ Enable yes/no
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

gemtekDevCpeServiceFlowHARQ 1.3.6.1.4.1.10529.300.11.1.1.12
Service Flow HARQ Enable yes/no
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER no(0), yes(1)  

gemtekDevCpeServiceFlowRules 1.3.6.1.4.1.10529.300.11.1.1.13
Service Flow calssifier rule numbers
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpePullFtpServerIP 1.3.6.1.4.1.10529.300.21.1
FTP upgrade server IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpePullFtpServerUserName 1.3.6.1.4.1.10529.300.21.2
Ftp Server User Name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpePullFtpServerPassword 1.3.6.1.4.1.10529.300.21.3
Ftp Server Password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpePullFtpFilePath 1.3.6.1.4.1.10529.300.21.4
Ftp File Path
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpePullFtpFileName 1.3.6.1.4.1.10529.300.21.5
Ftp File Name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpePullFtpUpgradeCmd 1.3.6.1.4.1.10529.300.21.6
Control FTP upgrade
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), downloadAndUpgrade(1), rollback(2)  

gemtekDevCpePullFtpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.21.7
Device status information on the progress of the upgrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(0), downloading(1), installing(2), error(3), success(4)  

gemtekDevCpeCurrentSwVersion 1.3.6.1.4.1.10529.300.22.1
This value identifies the version of software currently running in the CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpePreviousSwVersion 1.3.6.1.4.1.10529.300.22.2
This value identifies the previous software version in the CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeDownloadSwVersion 1.3.6.1.4.1.10529.300.22.3
This value identifies the version of software to download
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpePushFtpUpgradeCmd 1.3.6.1.4.1.10529.300.22.4
Control FTP upgrade process
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), download(1), upgrade(2), rollback(3)  

gemtekDevCpePushFtpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.22.5
Device status information on the progress of the upgrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(0), installing(1), error(2), success(3)  

gemtekDevCpeWimaxRssi 1.3.6.1.4.1.10529.300.1.1.1
RSSI Report(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxCinr 1.3.6.1.4.1.10529.300.1.1.2
CINR Report(dB)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxTxPower 1.3.6.1.4.1.10529.300.1.1.3
Tx Power Report(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxMaxTxPower 1.3.6.1.4.1.10529.300.1.1.4
MAX Tx Power Report(dBm)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxUpLinkModulation 1.3.6.1.4.1.10529.300.1.1.5
Up Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 5/8 64-QAM [BTC] 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeWimaxDownLinkModulation 1.3.6.1.4.1.10529.300.1.1.6
Down Link Modulation Type : QPSK [CC] 1/2 QPSK [CC] 3/4 16-QAM [CC] 1/2 16-QAM [CC] 3/4 64-QAM [CC] 1/2 64-QAM [CC] 2/3 64-QAM [CC] 3/4 QPSK [BTC] 1/2 QPSK [BTC] 3/4 or 2/3 16-QAM [BTC] 3/5 16-QAM [BTC] 4/5 64-QAM [BTC] 2/3 or 5/8 64-QAM [BTC] 5/6 or 4/5 QPSK [CTC] 1/2 Reserved QPSK [CTC] 3/4 16-QAM [CTC] 1/2 16-QAM [CTC] 3/4 64-QAM [CTC] 1/2 64-QAM [CTC] 2/3 64-QAM [CTC] 3/4 64-QAM [CTC] 5/6 QPSK [ZT CC] 1/2 QPSK [ZT CC] 3/4 16-QAM [ZT CC] 1/2 16-QAM [ZT CC] 3/4 64-QAM [ZT CC] 1/2 64-QAM [ZT CC] 2/3 64-QAM [ZT CC] 3/4 QPSK [LDPC] 1/2 QPSK [LDPC] 2/3 A code QPSK [LDPC] 3/4 A code 16-QAM [LDPC] 1/2 16-QAM [LDPC] 2/3 A code 16-QAM [LDPC] 3/4 A code 64-QAM [LDPC] 1/2 64-QAM [LDPC] 2/3 A code 64-QAM [LDPC] 3/4 A code QPSK [LDPC] 2/3 B code QPSK [LDPC] 3/4 B code 16-QAM [LDPC] 2/3 B code 16-QAM [LDPC] 3/4 B code 64-QAM [LDPC] 2/3 B code 64-QAM [LDPC] 3/4 B code QPSK [CC with optional interleaver] 1/2 QPSK [CC with optional interleaver] 3/4 16-QAM [CC with optional interleaver] 1/2 16-QAM [CC with optional interleaver] 3/4 64-QAM [CC with optional interleaver] 2/3 64-QAM [CC with optional interleaver] 3/4 QPSK [LDPC] 5/6 16-QAM [LDPC] 5/6 64-QAM [LDPC] 5/6
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeWimaxBsid 1.3.6.1.4.1.10529.300.1.1.7
Base Station MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeWimaxFrequency 1.3.6.1.4.1.10529.300.1.1.8
Center Frequency (kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeWimaxUpLinkDataRate 1.3.6.1.4.1.10529.300.1.1.9
Up Link Data Rate Report(Kbps)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxDownLinkDataRate 1.3.6.1.4.1.10529.300.1.1.10
Down Link Data Rate Report(Kbps)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxTotalUpLinkDataByte 1.3.6.1.4.1.10529.300.1.1.11
Total Up Link Data Bytes Report(Bytes)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeWimaxTotalDownLinkDataByte 1.3.6.1.4.1.10529.300.1.1.12
Total Down Link Data Bytes Report(Bytes)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeWimaxCpeState 1.3.6.1.4.1.10529.300.1.1.13
CPE State
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeWimaxCinrReuse1 1.3.6.1.4.1.10529.300.1.1.14
CINR Reuse1 Report(dB)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxCinrReuse3 1.3.6.1.4.1.10529.300.1.1.15
CINR Reuse3 Report(dB)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxBandwidth 1.3.6.1.4.1.10529.300.1.1.16
CPE Bandwidth(kHz)
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeWimaxZoneCinrChannelZero 1.3.6.1.4.1.10529.300.1.1.17
Zone CINR channel 0 Report(dB)
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeWimaxMimoMode 1.3.6.1.4.1.10529.300.1.1.18
MIMO mode status
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER siso(0), mimoMatrixA(1), mimoMatrixB(2), disconnect(4)  

gemtekDevCpeLanMacAddresss 1.3.6.1.4.1.10529.300.1.2.1
CPE LAN MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeLanTotalDownLinkDataByte 1.3.6.1.4.1.10529.300.1.2.2
Total Down Link Data Bytes Report(Bytes)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeLanTotalUpLinkDataByte 1.3.6.1.4.1.10529.300.1.2.3
Total Up Link Data Bytes Report(Bytes)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeLanTotalDownLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.4
LAN Total Down Link Data Packets Report(Packets)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeLanTotalUpLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.5
LAN Total Up Link Data Packets Report(Packets)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeWanMacAddresss 1.3.6.1.4.1.10529.300.1.2.6
CPE WAN MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeWanTotalDownLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.7
WAN Total Down Link Data Packets Report(Packets)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeWanTotalUpLinkDataPackets 1.3.6.1.4.1.10529.300.1.2.8
WAN Total Up Link Data Packets Report(Packets)
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeHardwareModel 1.3.6.1.4.1.10529.300.1.3.1
Hardware Model of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeFirmwareVersion 1.3.6.1.4.1.10529.300.1.3.2
Firmware Version of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeFirmwareCreationDate 1.3.6.1.4.1.10529.300.1.3.3
Firmware Creation Date
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeFrequencyRange 1.3.6.1.4.1.10529.300.1.3.4
Frequency Range of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeSerialNumber 1.3.6.1.4.1.10529.300.1.3.5
Serial Number of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeLatitude 1.3.6.1.4.1.10529.300.1.3.6
CPE Latitude Report
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

gemtekDevCpeLongitude 1.3.6.1.4.1.10529.300.1.3.7
CPE Longitude Report
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

gemtekDevCpeHeight 1.3.6.1.4.1.10529.300.1.3.8
CPE Height Report
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..16)  

gemtekDevCpeMibsVersion 1.3.6.1.4.1.10529.300.1.3.9
MIBs Version of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeBootromVersion 1.3.6.1.4.1.10529.300.1.3.10
Bootrom Version of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeBootromCreationDate 1.3.6.1.4.1.10529.300.1.3.11
Bootrom Creation Date
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

gemtekDevCpeProductVersion 1.3.6.1.4.1.10529.300.1.3.12
Product Version of CPE
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..255)  

trapServerEnable 1.3.6.1.4.1.10529.300.3.1.1
Enables/disables trap. Default: Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

trapServerIp 1.3.6.1.4.1.10529.300.3.1.2
trap server
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

trapServerPort 1.3.6.1.4.1.10529.300.3.1.3
trap port
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

trapServerCommunity 1.3.6.1.4.1.10529.300.3.1.4
trap community
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

coldStart 1.3.6.1.4.1.10529.300.3.2.1
A coldStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself and that its configuration may have been altered.
Status: current Access: read-write
NOTIFICATION-TYPE    

warmStart 1.3.6.1.4.1.10529.300.3.2.2
A warmStart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that its configuration is unaltered.
Status: current Access: read-write
NOTIFICATION-TYPE    

fatalErrorRestart 1.3.6.1.4.1.10529.300.3.2.3
A fatalErrorRestart trap signifies that the SNMP entity, supporting a notification originator application, is reinitializing itself such that fatal error may have occured.
Status: current Access: read-write
NOTIFICATION-TYPE    

linkUp 1.3.6.1.4.1.10529.300.3.2.4
A linkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left the down state and transitioned into some other state (but not into the notPresent state). This other state is indicated by the included value of ifOperStatus.
Status: current Access: read-write
NOTIFICATION-TYPE    

notTheHightestPriorityAP 1.3.6.1.4.1.10529.300.3.2.5
When the AP preferred selection mode is enabled and the PMP320CPE synchronizes to an AP that is not the highest priority AP in the BSID list, the CPE shall send an SNMP trap after initial service flows and PMP320CPE management IP connectivity are established.
Status: current Access: read-write
NOTIFICATION-TYPE    

eapTlsPrivateKeyPassword 1.3.6.1.4.1.10529.300.7.8.1
EAP-TLS Private key password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

eapTtlsPhase2 1.3.6.1.4.1.10529.300.7.9.1
EAP-TTLS Phase2(PAP/CHAP/MSCHAP/MSCHAPV2/MD5)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER pap(1), chap(2), mschap(3), mschapV2(4), md5(5)  

eapTtlsUsername 1.3.6.1.4.1.10529.300.7.9.2
EAP-TTLS Username
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

eapTtlsPassword 1.3.6.1.4.1.10529.300.7.9.3
EAP-TTLS Password
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

eapTtlsUseDeviceCertificate 1.3.6.1.4.1.10529.300.7.9.4
EAP-TTLS Use device certificate(Disable/Enable) It needs at least one user certificate file. Please upload a user certificate file to CPE then you can set it enabled.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

eapTtlsPrivateKeyPassword 1.3.6.1.4.1.10529.300.7.9.5
EAP-TTLS Private key password(the same as EAP-TLS).
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..32)  

gemtekDevCpeBridgeIpType 1.3.6.1.4.1.10529.300.8.2.1
Bridge IP Type(Static/DHCP)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dhcp(1)  

gemtekDevCpeBridgeIpAddress 1.3.6.1.4.1.10529.300.8.2.2
Bridge Mode Static IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeBridgeNetmask 1.3.6.1.4.1.10529.300.8.2.3
Bridge Mode Static Netmask configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeBridgeGateway 1.3.6.1.4.1.10529.300.8.2.4
Bridge Mode Static IP Gateway
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeBridgeDhcpLeaseTime 1.3.6.1.4.1.10529.300.8.2.5
Bridge Mode DHCP IP Lease time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeBridgeDhcpRenewalTime 1.3.6.1.4.1.10529.300.8.2.6
Bridge Mode DHCP IP Renewal time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeBridgeDhcpRebindTime 1.3.6.1.4.1.10529.300.8.2.7
Bridge Mode DHCP IP Rebind time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeMVLAN 1.3.6.1.4.1.10529.300.8.2.8
OBJECT IDENTIFIER    

gemtekDevCpeMgmtVlan 1.3.6.1.4.1.10529.300.8.2.8.1
OBJECT IDENTIFIER    

gemtekDevCpeDataVlan 1.3.6.1.4.1.10529.300.8.2.8.2
OBJECT IDENTIFIER    

gemtekDevCpeVlanMembershipTable 1.3.6.1.4.1.10529.300.8.2.8.3
VLAN Membership Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeVlanMembershipEntry

gemtekDevCpeVlanMembershipEntry 1.3.6.1.4.1.10529.300.8.2.8.3.1
VLAN Membership Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeVlanMembershipEntry  

gemtekDevCpeDscpToVp 1.3.6.1.4.1.10529.300.8.2.8.4
OBJECT IDENTIFIER    

gemtekDevCpePktCounter 1.3.6.1.4.1.10529.300.8.2.8.5
OBJECT IDENTIFIER    

gemtekDevCpeMgmtVlanEnalbe 1.3.6.1.4.1.10529.300.8.2.8.1.1
Management VLAN (Enabled/Disabled)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeMgmtVlanVid 1.3.6.1.4.1.10529.300.8.2.8.1.2
Setting Management VLAN VID(0~4095).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeMgmtVlanVp 1.3.6.1.4.1.10529.300.8.2.8.1.3
Management VLAN VP.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeDataVlanEnalbe 1.3.6.1.4.1.10529.300.8.2.8.2.1
Data VLAN (Enabled/Disabled)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDataVlanVid 1.3.6.1.4.1.10529.300.8.2.8.2.2
Setting Data VLAN VID(0~4095).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeAllowPacketType 1.3.6.1.4.1.10529.300.8.2.8.2.3
Data VLN allow packet type
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER all(0), taggedOnly(1), untaggedOnly(2)  

gemtekDevCpeVlanMembershipIndex 1.3.6.1.4.1.10529.300.8.2.8.3.1.1
VLAN Membership Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeVlanMembershipVidBegin 1.3.6.1.4.1.10529.300.8.2.8.3.1.2
VLAN Membership VLAN VID Begin(0~4095).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeVlanMembershipVidEnd 1.3.6.1.4.1.10529.300.8.2.8.3.1.3
VLAN Membership VLAN VID End(0~4095).
Status: current Access: read-create
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeVlanMembershipVidRowstatus 1.3.6.1.4.1.10529.300.8.2.8.3.1.4
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row. Every row can't overlap(Begin,End).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpeDscpToVpMapping 1.3.6.1.4.1.10529.300.8.2.8.4.1
DSCP To VP Mapping, CP00~CP63,CP00=0,CP48=6,CP56=7.
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

gemtekDevCpeTaggedPkts 1.3.6.1.4.1.10529.300.8.2.8.5.1
CPE tagged packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeTaggedPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.2
Reset CPE tagged packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

gemtekDevCpeUntaggedPkts 1.3.6.1.4.1.10529.300.8.2.8.5.3
CPE tagged packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeUntaggedPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.4
Reset CPE untagged packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

gemtekDevCpeNonmemberPkts 1.3.6.1.4.1.10529.300.8.2.8.5.5
CPE Non-member packets.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNonmemberPktsReset 1.3.6.1.4.1.10529.300.8.2.8.5.6
Reset CPE Non-member packets.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), reset(1)  

gemtekDevCpeNatWanIpType 1.3.6.1.4.1.10529.300.8.3.1
NAT WAN IP Type(Static/DHCP)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER static(0), dhcp(1)  

gemtekDevCpeNatWanIpAddress 1.3.6.1.4.1.10529.300.8.3.2
NAT Static WAN IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeNatWanNetmask 1.3.6.1.4.1.10529.300.8.3.3
NAT Static WAN Netmask configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeNatWanGateway 1.3.6.1.4.1.10529.300.8.3.4
NAT Static WAN Gateway configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeNatWanDhcpLeaseTime 1.3.6.1.4.1.10529.300.8.3.14
NAT Mode DHCP IP Lease time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatWanDhcpRenewalTime 1.3.6.1.4.1.10529.300.8.3.15
NAT Mode DHCP IP Renewal time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatWanDhcpRebindTime 1.3.6.1.4.1.10529.300.8.3.16
NAT Mode DHCP IP Rebind time(sec).
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatLanIpType 1.3.6.1.4.1.10529.300.8.3.5
NAT LAN IP Type(Static/DHCP)
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER static(0), dhcp(1)  

gemtekDevCpeNatLanIpAddress 1.3.6.1.4.1.10529.300.8.3.6
NAT LAN IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeNatLanNetmask 1.3.6.1.4.1.10529.300.8.3.7
NAT LAN Netmask configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeNatMtu 1.3.6.1.4.1.10529.300.8.3.8
NAT Ethernet MTU size(Default:1476)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

gemtekDevCpeDhcpServer 1.3.6.1.4.1.10529.300.8.3.9
OBJECT IDENTIFIER    

gemtekDevCpePortForwarding 1.3.6.1.4.1.10529.300.8.3.10
OBJECT IDENTIFIER    

gemtekDevCpePortTrigger 1.3.6.1.4.1.10529.300.8.3.11
OBJECT IDENTIFIER    

gemtekDevCpeDhcpClientList 1.3.6.1.4.1.10529.300.8.3.12
OBJECT IDENTIFIER    

gemtekDevCpeDscpConfiguration 1.3.6.1.4.1.10529.300.8.3.13
OBJECT IDENTIFIER    

gemtekDevCpeNatModeVLAN 1.3.6.1.4.1.10529.300.8.3.17
OBJECT IDENTIFIER    

gemtekDevCpeNatModeMgmtVlan 1.3.6.1.4.1.10529.300.8.3.17.1
OBJECT IDENTIFIER    

gemtekDevCpeNatModeDataVlan 1.3.6.1.4.1.10529.300.8.3.17.2
OBJECT IDENTIFIER    

gemtekDevCpeNatModeMgmtVlanEnalbe 1.3.6.1.4.1.10529.300.8.3.17.1.1
[Nat Mode] Management VLAN (Enabled/Disabled)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeNatModeMgmtVlanVid 1.3.6.1.4.1.10529.300.8.3.17.1.2
[Nat Mode] Setting Management VLAN VID(1~4095).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatModeMgmtVlanVp 1.3.6.1.4.1.10529.300.8.3.17.1.3
[Nat Mode] Setting Management VLAN VP(0~7).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatModeDataVlanEnalbe 1.3.6.1.4.1.10529.300.8.3.17.2.1
[Nat Mode] Data VLAN (Enabled/Disabled)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeNatModeDataVlanVid 1.3.6.1.4.1.10529.300.8.3.17.2.2
[Nat Mode] Setting Data VLAN VID(1~4095).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeNatModeDataVlanVp 1.3.6.1.4.1.10529.300.8.3.17.2.3
[Nat Mode] Setting Data VLAN VP(0~7).
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeDhcpServerEnable 1.3.6.1.4.1.10529.300.8.3.9.1
DHCP Server Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDhcpServerStartIp 1.3.6.1.4.1.10529.300.8.3.9.2
DHCP Server Start IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerEndIp 1.3.6.1.4.1.10529.300.8.3.9.3
DHCP Server End IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerPrimaryDnsIp 1.3.6.1.4.1.10529.300.8.3.9.4
DHCP Server Primary DNS IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerPrimaryDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.5
DHCP Server Primary DNS From ISP Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDhcpServerSecondDnsIp 1.3.6.1.4.1.10529.300.8.3.9.6
DHCP Server Second DNS IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerSecondDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.7
DHCP Server Second DNS From ISP Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDhcpServerTertiaryDnsIp 1.3.6.1.4.1.10529.300.8.3.9.8
DHCP Server Tertiary DNS IP Address configuration
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerTertiaryDnsFromIsp 1.3.6.1.4.1.10529.300.8.3.9.9
DHCP Server Tertiary DNS From ISP Enable/Disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDhcpServerDomainName 1.3.6.1.4.1.10529.300.8.3.9.10
DHCP Server Domain Name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..64)  

gemtekDevCpeDhcpServerMaxLeaseTime 1.3.6.1.4.1.10529.300.8.3.9.11
DHCP Server MAX Lease Time
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

gemtekDevCpeDhcpServerPermanentHostTable 1.3.6.1.4.1.10529.300.8.3.9.12
DHCP Server Permanent Host Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeDhcpServerPermanentHostEntry

gemtekDevCpeDhcpServerPermanentHostEntry 1.3.6.1.4.1.10529.300.8.3.9.12.1
DHCP Server Permanent Host Entry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeDhcpServerPermanentHostEntry  

gemtekDevCpeDhcpServerPermanentHostIndex 1.3.6.1.4.1.10529.300.8.3.9.12.1.1
DHCP Server Permanent Host Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeDhcpServerPermanentHostMac 1.3.6.1.4.1.10529.300.8.3.9.12.1.2
DHCP Server Permanent Host MAC
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeDhcpServerPermanentHostIp 1.3.6.1.4.1.10529.300.8.3.9.12.1.3
DHCP Server Permanent Host IP
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpServerPermanentHostEntryEnable 1.3.6.1.4.1.10529.300.8.3.9.12.1.4
DHCP Server Permanent Host Entry Enable/Disable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeDhcpServerPermanentRowstatus 1.3.6.1.4.1.10529.300.8.3.9.12.1.5
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpePortForwardingTable 1.3.6.1.4.1.10529.300.8.3.10.1
Port Forwarding Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpePortForwardingEntry

gemtekDevCpePortForwardingEntry 1.3.6.1.4.1.10529.300.8.3.10.1.1
Port Forwarding Entry WAN End - WAN Begin=LAN End - LAN Begin, WAN End - WAN Begin <=30, WAN Begin=>1 WAN End<=65535, LAN Begin=>1 LAN End<=65535
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpePortForwardingEntry  

gemtekDevCpePortForwardingIndex 1.3.6.1.4.1.10529.300.8.3.10.1.1.1
Port Forwarding Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortForwardingWanPortBegin 1.3.6.1.4.1.10529.300.8.3.10.1.1.2
Port Forwarding Wan Port Begin
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortForwardingWanPortEnd 1.3.6.1.4.1.10529.300.8.3.10.1.1.3
Port Forwarding Wan Port End
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortForwardingLanIp 1.3.6.1.4.1.10529.300.8.3.10.1.1.4
Port Forwarding Lan Ip
Status: current Access: read-create
OBJECT-TYPE    
  IpAddress  

gemtekDevCpePortForwardingLanPortBegin 1.3.6.1.4.1.10529.300.8.3.10.1.1.5
Port Forwarding Lan Port Begin
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortForwardingLanPortEnd 1.3.6.1.4.1.10529.300.8.3.10.1.1.6
Port Forwarding Lan Port End
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortForwardingProtocol 1.3.6.1.4.1.10529.300.8.3.10.1.1.7
Port Forwarding Entry Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcp(0), udp(1), tcpAndUdp(2)  

gemtekDevCpePortForwardingEntryEnable 1.3.6.1.4.1.10529.300.8.3.10.1.1.8
Port Forwarding Entry Enable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpePortForwardingRowstatus 1.3.6.1.4.1.10529.300.8.3.10.1.1.9
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpePortTriggerTable 1.3.6.1.4.1.10529.300.8.3.11.1
Port Trigger Table
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpePortTriggerEntry

gemtekDevCpePortTriggerEntry 1.3.6.1.4.1.10529.300.8.3.11.1.1
Port Trigger Entry 1<=TriggerPortBegin
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpePortTriggerEntry  

gemtekDevCpePortTriggerIndex 1.3.6.1.4.1.10529.300.8.3.11.1.1.1
Port Trigger Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortTriggerName 1.3.6.1.4.1.10529.300.8.3.11.1.1.2
Port Trigger Name
Status: current Access: read-create
OBJECT-TYPE    
  OCTET STRING Size(0..30)  

gemtekDevCpePortTriggerTriggerPortBegin 1.3.6.1.4.1.10529.300.8.3.11.1.1.3
Port Trigger Trigger Port Begin
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortTriggerTriggerPortEnd 1.3.6.1.4.1.10529.300.8.3.11.1.1.4
Port Trigger Trigger Port End
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortTriggerForwardingPortBegin 1.3.6.1.4.1.10529.300.8.3.11.1.1.5
Port Trigger Forwarding Port Begin
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortTriggerForwardingPortEnd 1.3.6.1.4.1.10529.300.8.3.11.1.1.6
Port Trigger Forwarding Port End
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpePortTriggerProtocol 1.3.6.1.4.1.10529.300.8.3.11.1.1.7
Port Trigger Protocol
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER tcp(0), udp(1)  

gemtekDevCpePortTriggerEntryEnable 1.3.6.1.4.1.10529.300.8.3.11.1.1.8
Port Trigger Entry Enable
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpePortTriggerRowstatus 1.3.6.1.4.1.10529.300.8.3.11.1.1.9
active(1) to active the row and save setting to memory. createAndWait(5) to create a row in the bottom. destroy(6) to delete a row.
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

gemtekDevCpeDhcpClentListTable 1.3.6.1.4.1.10529.300.8.3.12.1
gemtekDevCpeDhcpClentListTable
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    GemtekDevCpeDhcpClentListEntry

gemtekDevCpeDhcpClentListEntry 1.3.6.1.4.1.10529.300.8.3.12.1.1
gemtekDevCpeDhcpClentListEntry
Status: current Access: not-accessible
OBJECT-TYPE    
  GemtekDevCpeDhcpClentListEntry  

gemtekDevCpeDhcpClentListIndex 1.3.6.1.4.1.10529.300.8.3.12.1.1.1
DHCP Clent List Index
Status: current Access: read-only
OBJECT-TYPE    
  Integer32  

gemtekDevCpeDhcpClentListIp 1.3.6.1.4.1.10529.300.8.3.12.1.1.2
DHCP Clent List: IP Address
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeDhcpClentListMacAddress 1.3.6.1.4.1.10529.300.8.3.12.1.1.3
DHCP Clent List: MAC Address
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING Size(0..18)  

gemtekDevCpeDhcpClentListExpireTime 1.3.6.1.4.1.10529.300.8.3.12.1.1.4
DHCP Clent List: Expire Time
Status: current Access: read-only
OBJECT-TYPE    
  OCTET STRING  

gemtekDevCpeTftpServerIP 1.3.6.1.4.1.10529.300.69.1
TFTP upgrade server IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeTftpFileName 1.3.6.1.4.1.10529.300.69.2
TFTP File Name
Status: current Access: read-write
OBJECT-TYPE    
  OCTET STRING Size(0..256)  

gemtekDevCpeTftpUpgradeCmd 1.3.6.1.4.1.10529.300.69.3
Control TFTP upgrade
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER default(0), downloadAndUpgrade(1)  

gemtekDevCpeTftpUpgradeAdminStatus 1.3.6.1.4.1.10529.300.69.4
Device status information on the progress of the upgrade.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER ready(0), downloading(1), installing(2), error(3), success(4)  

gemtekDevCpeMgmtDscpId 1.3.6.1.4.1.10529.300.8.3.13.1
MGMT DSCP ID(range:0~63, default:0)
Status: current Access: read-write
OBJECT-TYPE    
  Integer32  

gemtekDevCpeDropDataPacket 1.3.6.1.4.1.10529.300.8.3.13.2
Drop data packet if its dscp is the same as mgmt Enabled/Disabled(default:Disabled)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeSyslogEnable 1.3.6.1.4.1.10529.300.12.1
Send syslog to syslog server enable/disable
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disabled(0), enabled(1)  

gemtekDevCpeSyslogServerIp 1.3.6.1.4.1.10529.300.12.2
config syslog server IP
Status: current Access: read-write
OBJECT-TYPE    
  IpAddress  

gemtekDevCpeSyslogServerPort 1.3.6.1.4.1.10529.300.12.3
config syslog server port(1~65535,default:514)
Status: current Access: read-create
OBJECT-TYPE    
  Integer32  

gemtekDevCpeMaxTxPowerModeSelection 1.3.6.1.4.1.10529.300.13.1
The variable is deprecated. Max Tx Power Mode Selection (RF Mode/EIRP Mode)
Status: obsolete Access: read-write
OBJECT-TYPE    
  INTEGER rf(0), eirp(1)  

gemtekDevCpeMaxTxPowerRfMode 1.3.6.1.4.1.10529.300.13.2
OBJECT IDENTIFIER    

gemtekDevCpeMaxTxPowerEirpMode 1.3.6.1.4.1.10529.300.13.3
OBJECT IDENTIFIER    

gemtekDevCpeRfModeBPSK 1.3.6.1.4.1.10529.300.13.2.1
The variable is deprecated. RF Mode BPSK Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeRfModeQPSK 1.3.6.1.4.1.10529.300.13.2.2
The variable is deprecated. RF Mode QPSK Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeRfModeQAM16 1.3.6.1.4.1.10529.300.13.2.3
The variable is deprecated. RF Mode QAM16 Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeRfModeQAM64 1.3.6.1.4.1.10529.300.13.2.4
The variable is deprecated. RF Mode QAM64 Setting(0~2450)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeEirpModeAntennaGain 1.3.6.1.4.1.10529.300.13.3.1
The variable is deprecated. EIRP Mode Antenna Gain(0~2450)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeEirpModeBPSK 1.3.6.1.4.1.10529.300.13.3.2
The variable is deprecated. EIRP Mode BPSK Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeEirpModeQPSK 1.3.6.1.4.1.10529.300.13.3.3
The variable is deprecated. EIRP Mode QPSK Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeEirpModeQAM16 1.3.6.1.4.1.10529.300.13.3.4
The variable is deprecated. EIRP Mode QAM16 Setting(0~2750)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

gemtekDevCpeEirpModeQAM64 1.3.6.1.4.1.10529.300.13.3.5
The variable is deprecated. EIRP Mode QAM64 Setting(0~2450)
Status: obsolete Access: read-write
OBJECT-TYPE    
  Unsigned32  

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor