MY-SYSTEM-MIB

File: MY-SYSTEM-MIB.mib (7932 bytes)

Imported modules

SNMPv2-SMI	SNMPv2-TC	SNMPv2-CONF
MY-SMI

Imported symbols

MODULE-IDENTITY	OBJECT-TYPE	NOTIFICATION-TYPE
Integer32	Counter32	TruthValue
DisplayString	RowStatus	MODULE-COMPLIANCE
OBJECT-GROUP	NOTIFICATION-GROUP	myMgmt

Defined Values

mySystemMIB		1.3.6.1.4.1.4881.1.1.10.2.1
This module defines my system mibs.
MODULE-IDENTITY

mySystemMIBObjects		1.3.6.1.4.1.4881.1.1.10.2.1.1
OBJECT IDENTIFIER

mySystemHwVersion		1.3.6.1.4.1.4881.1.1.10.2.1.1.1
Return the string of the Revision number of hardware resides on the FastSwitch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

mySystemSwVersion		1.3.6.1.4.1.4881.1.1.10.2.1.1.2
Return the string of the Revision number of software resides on the FastSwitch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

mySystemBootVersion		1.3.6.1.4.1.4881.1.1.10.2.1.1.3
Return the string of the Revision number of BOOT software resides on the FastSwitch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

mySystemSysCtrlVersion		1.3.6.1.4.1.4881.1.1.10.2.1.1.4
Return the string of the Revision number of CTRL software resides on the FastSwitch.
Status: current	Access: read-only
OBJECT-TYPE
	DisplayString	Size(1..32)

mySystemParametersSave		1.3.6.1.4.1.4881.1.1.10.2.1.1.5
Save all parameters changed in configuration by setting this object to any value but 0, set its value to 0 will cause no action of agent, otherwise all changes of prarameters will be saved for retrive when system is reset, if parameter is changed but not saved all changes will come to their original value when system down and up again, when query always return value 0.
Status: current	Access: read-write
OBJECT-TYPE
	Integer32

mySystemOutBandRate		1.3.6.1.4.1.4881.1.1.10.2.1.1.6
Determine the console(OutBand) baud rate : 9600 - 1,19200 - 2, 38300 - 3, 57600 - 4
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER	baud9600(1), baud19200(2), baud38400(3), baud57600(4)

mySystemReset		1.3.6.1.4.1.4881.1.1.10.2.1.1.7
This Object allow perform soft reset of system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start trap will send to declare the state and when queried will always return 0.
Status: current	Access: read-write
OBJECT-TYPE
	INTEGER

mySwitchLayer		1.3.6.1.4.1.4881.1.1.10.2.1.1.8
Which layer's device the switch in system
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	layer2(1), layer3(2)

mySystemHwPower		1.3.6.1.4.1.4881.1.1.10.2.1.1.9
The state of power.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	rpsNoLink(1), rpsLinkAndNoPower(2), rpsLinkAndReadyForPower(3), rpsLinkAndPower(4)

mySystemHwFan		1.3.6.1.4.1.4881.1.1.10.2.1.1.10
The state of fan.
Status: current	Access: read-only
OBJECT-TYPE
	INTEGER	work(1), stop(2)

mySystemOutBandTimeout		1.3.6.1.4.1.4881.1.1.10.2.1.1.11
The timeout of console.0 indicate that timeout function is disabled.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	0..3600

mySystemTelnetTimeout		1.3.6.1.4.1.4881.1.1.10.2.1.1.12
The timeout of telnet.0 indicate that timeout function is disabled.
Status: obsolete	Access: read-write
OBJECT-TYPE
	Integer32	0..3600

mySystemMIBTraps		1.3.6.1.4.1.4881.1.1.10.2.1.2
OBJECT IDENTIFIER

mySystemHardChangeDesc		1.3.6.1.4.1.4881.1.1.10.2.1.2.1
The description of hard change
Status: current	Access: accessible-for-notify
OBJECT-TYPE
	DisplayString

mySystemHardChangeDetected		1.3.6.1.4.1.4881.1.1.10.2.1.2.2
System hardware has changed include number of devices or number of modules or the place or type of the module is change.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

mySystemPowerStateChange		1.3.6.1.4.1.4881.1.1.10.2.1.2.3
while the state of power changed, then this trap will be sent.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

mySystemFanStateChange		1.3.6.1.4.1.4881.1.1.10.2.1.2.4
while the state of fan changed, then this trap will be sent.
Status: current	Access: accessible-for-notify
NOTIFICATION-TYPE

mySystemMIBConformance		1.3.6.1.4.1.4881.1.1.10.2.1.3
OBJECT IDENTIFIER

mySystemMIBCompliances		1.3.6.1.4.1.4881.1.1.10.2.1.3.1
OBJECT IDENTIFIER

mySystemMIBGroups		1.3.6.1.4.1.4881.1.1.10.2.1.3.2
OBJECT IDENTIFIER

mySystemMIBCompliance		1.3.6.1.4.1.4881.1.1.10.2.1.3.1.1
The compliance statement for entities which implement the My System MIB
Status: current	Access: accessible-for-notify
MODULE-COMPLIANCE

mySystemMIBGroup		1.3.6.1.4.1.4881.1.1.10.2.1.3.2.1
A collection of objects providing system information and opertion to a My agent.
Status: current	Access: accessible-for-notify
OBJECT-GROUP

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor