MY-AAA-MIB

File: MY-AAA-MIB.mib (37994 bytes)

Imported modules

SNMPv2-SMI INET-ADDRESS-MIB RFC1155-SMI
Q-BRIDGE-MIB SNMPv2-TC SNMPv2-CONF
MY-TC P-BRIDGE-MIB MY-SMI

Imported symbols

MODULE-IDENTITY OBJECT-TYPE NOTIFICATION-TYPE
Integer32 Counter32 Unsigned32
IpAddress InetAddressType InetAddress
Counter VlanId TruthValue
DisplayString RowStatus MacAddress
MODULE-COMPLIANCE OBJECT-GROUP NOTIFICATION-GROUP
ConfigStatus IfIndex EnabledStatus
myMgmt

Defined Types

MyDot1xAuthConfigEntry  
SEQUENCE    
  myDot1xAuthObjectsConfigFdbId Unsigned32
  myDot1xAuthObjectsConfigAddr MacAddress
  myDot1xAuthObjectsPaeState INTEGER
  myDot1xAuthObjectsBackendAuthState INTEGER
  myDot1xAuthObjectsAuthControlledPortStatus INTEGER
  myDot1xAuthObjectsKeyTxEnabled TruthValue
  myDot1xAuthObjectsIfIndex IfIndex

MyDot1xAuthStatsEntry  
SEQUENCE    
  myDot1xAuthObjectsStatsFdbId Unsigned32
  myDot1xAuthObjectsStatsAddr MacAddress
  myDot1xAuthObjectsEapolFramesRx Counter32
  myDot1xAuthObjectsEapolFramesTx Counter32
  myDot1xAuthObjectsEapolMyFramesRx Counter32
  myDot1xAuthObjectsEapolLogoffFramesRx Counter32
  myDot1xAuthObjectsEapolRespIdFramesRx Counter32
  myDot1xAuthObjectsEapolRespFramesRx Counter32
  myDot1xAuthObjectsEapolReqIdFramesTx Counter32
  myDot1xAuthObjectsEapolReqFramesTx Counter32
  myDot1xAuthObjectsInvalidEapolFramesRx Counter32
  myDot1xAuthObjectsEapLengthErrorFramesRx Counter32
  myDot1xAuthObjectsLastEapolFrameVersion Unsigned32
  myDot1xAuthObjectsLastEapolFrameSource MacAddress

MyAuthIfEntry  
SEQUENCE    
  myAuthIf IfIndex
  myAuthIfStatus EnabledStatus

MyDot1xIfUserMaxEntry  
SEQUENCE    
  myDot1xIfUserMaxIndex IfIndex
  myDot1xIfUserMaxNum Unsigned32

MyAAAServerConfigEntry  
SEQUENCE    
  myAAAServerConfigProtocol INTEGER
  myAAAServerConfigIndex Unsigned32
  myAAAServerConfigAddressType InetAddressType
  myAAAServerConfigAddress InetAddress
  myAAAServerConfigAuthPort INTEGER
  myAAAServerConfigAcctPort INTEGER
  myAAAServerConfigKeyStr DisplayString
  myAAAServerConfigRowStatus RowStatus

MyAuthAddrEntry  
SEQUENCE    
  myAuthPort IfIndex
  myAuthMacAddress MacAddress
  myAuthAddrStatus INTEGER

MyAuthUserEntry  
SEQUENCE    
  myAuthUserFdbId Unsigned32
  myAuthUserMacAddress MacAddress
  myAuthUserName DisplayString
  myAuthUserSessionId DisplayString
  myAuthUserIpAddr IpAddress
  myAuthUserPort INTEGER
  myAuthUserStatus ConfigStatus

Defined Values

myAAAMIB 1.3.6.1.4.1.4881.1.1.10.2.19
This module defines my AAA(802.1x) mibs.
MODULE-IDENTITY    

myAAAMIBObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1
OBJECT IDENTIFIER    

myDot1xAuthObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1.1
OBJECT IDENTIFIER    

myAAAServerObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1.2
OBJECT IDENTIFIER    

myAuthUserObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1.3
OBJECT IDENTIFIER    

myAuthModeObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1.4
OBJECT IDENTIFIER    

myClientProbeObjects 1.3.6.1.4.1.4881.1.1.10.2.19.1.5
OBJECT IDENTIFIER    

myDot1xAuthStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.1
The enable(1)/disable(2) control used by the 802.1x global settings.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myDot1xAuthObjectsQuietPeriod 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.2
The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsTxPeriod 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.3
The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsSuppTimeout 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.4
The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsServerTimeout 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.5
The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsMaxReq 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.6
The value of the maxReq constant currently in use by the Backend Authentication state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsReAuthPeriod 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.7
The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsMaxReauth 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.8
The value of the reAuthMax constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsReAuthEnable 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.9
The enable(1)/disable(2) control used by the Reauthentication Timer state machine.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myDot1xAuthObjectsConfigTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10
A table that contains the configuration objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address that may authenticate access to itself.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyDot1xAuthConfigEntry

myDot1xAuthObjectsConfigEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1
The configuration information for an Authenticator PAE.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyDot1xAuthConfigEntry  

myDot1xAuthObjectsConfigFdbId 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.1
The VID of vlan which the address blongs to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsConfigAddr 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.2
The MAC address associated with this configurations.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

myDot1xAuthObjectsPaeState 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.3
The current value of the Authenticator PAE state machine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9)  

myDot1xAuthObjectsBackendAuthState 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.4
The current state of the Backend Authentication state machine.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7)  

myDot1xAuthObjectsAuthControlledPortStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.5
The current value of the controlled Port status parameter for the Port.
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER authorized(1), unauthorized(2)  

myDot1xAuthObjectsKeyTxEnabled 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.6
The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine.
Status: current Access: read-only
OBJECT-TYPE    
  TruthValue  

myDot1xAuthObjectsIfIndex 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.10.1.7
The interface index associated with this configurations
Status: current Access: read-only
OBJECT-TYPE    
  IfIndex  

myDot1xAuthObjectsStatsTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11
A table that contains the statistics objects for the Authenticator PAE associated with each MAC address. An entry appears in this table for each MAC address that may authenticate access to itself.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyDot1xAuthStatsEntry

myDot1xAuthStatsEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1
The statistics information for an Authenticator PAE.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyDot1xAuthStatsEntry  

myDot1xAuthObjectsStatsFdbId 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.1
The VID of vlan which the address blongs to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsStatsAddr 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.2
The MAC address associated with this states.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

myDot1xAuthObjectsEapolFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.3
The number of valid EAPOL frames of any type that have been received by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolFramesTx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.4
The number of EAPOL frames of any type that have been transmitted by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolMyFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.5
The number of EAPOL My frames that have been received by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolLogoffFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.6
The number of EAPOL Logoff frames that have been received by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolRespIdFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.7
The number of EAP Resp/Id frames that have been received by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolRespFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.8
The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolReqIdFramesTx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.9
The number of EAP Req/Id frames that have been transmitted by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapolReqFramesTx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.10
The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsInvalidEapolFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.11
The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsEapLengthErrorFramesRx 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.12
The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid.
Status: current Access: read-only
OBJECT-TYPE    
  Counter32  

myDot1xAuthObjectsLastEapolFrameVersion 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.13
The protocol version number carried in the most recently received EAPOL frame.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

myDot1xAuthObjectsLastEapolFrameSource 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.11.1.14
The source MAC address carried in the most recently received EAPOL frame.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

myDot1xCurrentUserNumber 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.12
Numbers of users who attached to the system ,regardless of their state.
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

myDot1xCurrentAuthenticatedUserNumber 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.13
Numbers of user who attached to the system and their current state is authorized
Status: current Access: read-only
OBJECT-TYPE    
  Counter  

myDot1xAccountStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.14
The enable(1)/disable(2) control used by the accounting function.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myAuthIfTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.15
The table of the authenticated status of interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyAuthIfEntry

myAuthIfEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.15.1
The entry of MAC address which can be authenticated.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyAuthIfEntry  

myAuthIf 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.15.1.1
The port number of the port/trunk to which frames received from a specific port/trunk and destined for a specific MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndex  

myAuthIfStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.15.1.2
The authentication status of a port, can be opened by setting its value to Enabled(1), or closed by setting its value to Disabled(2).
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myAuthenticationMode 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.16
Mode used for authentication
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER eap-md5(1), chap(2)  

myDot1xAccountUpdateStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.17
Account Update Status
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myDot1xAcctInterimInterval 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.18
Account Interim Interval
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 60..65535  

myDot1xEapolTagEnabled 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.19
Eapol Tag Enabled
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myDot1xIfUserMaxTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.20
The table of the max dot1x user number on authenticated interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyDot1xIfUserMaxEntry

myDot1xIfUserMaxEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.20.1
The entry of max dot1x user number on authenticated interface.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyDot1xIfUserMaxEntry  

myDot1xIfUserMaxIndex 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.20.1.1
The interface index which dot1x authentication is enabled.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndex  

myDot1xIfUserMaxNum 1.3.6.1.4.1.4881.1.1.10.2.19.1.1.20.1.2
The max dot1x user num on the interface, this is valid only when dot1x authentication is enable on that interface. Number 0 indicates no user number limits enabled on the interface.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32 1..4000  

myAAAServerAuthPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.2
UDP port used for authentication in the global configuration. For RADIUS only, default value is 1812.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

myAAAServerAcctPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.3
UDP port used for accounting service in the global configuration. For RADIUS only, default value is 1813.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER 0..65535  

myAAAServerRadiusKeyStr 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.4
The server key to be used with all RADIUS server. Retrieving the value of this object via SNMP will return an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

myAAAServerTacplusKeyStr 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.8
The server key to be used with all TACACS+ server. Retrieving the value of this object via SNMP will return an empty string for security reasons.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(0..255)  

myAAAServerConfigTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9
This table shows current configurations for each AAA server, allows existing servers to be removed and new ones to be created.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyAAAServerConfigEntry

myAAAServerConfigEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1
The table of AAA server configuration identified by its protocol and its index.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyAAAServerConfigEntry  

myAAAServerConfigProtocol 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.1
The variable denotes the protocol used by the managed device with the AAA server corresponding to this entry in the table.
Status: current Access: not-accessible
OBJECT-TYPE    
  INTEGER radius(1), tacplus(2)  

myAAAServerConfigIndex 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.2
A number uniquely identifying each server. If the myAAAServerConfigIndex value for row creation is already in use by an existing entry, snmp set to the myAAAServerConfigIndex value will fail. Upon reload, casIndex values may be changed.
Status: current Access: not-accessible
OBJECT-TYPE    
  Unsigned32 1..4294967295  

myAAAServerConfigAddressType 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.3
The type of address format used for the myAAAServerConfigAddress object.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddressType  

myAAAServerConfigAddress 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.4
The IP address of the server.
Status: current Access: read-create
OBJECT-TYPE    
  InetAddress  

myAAAServerConfigAuthPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.5
UDP/TCP port used for authentication in the server. For RADIUS, default value is 1812. For TACACS+, default value is 49.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

myAAAServerConfigAcctPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.6
UDP/TCP port used for accounting service in the server. For RADIUS, default value is 1813. For TACACS+, the value of myAAAServerConfigAcctPort is ignored, myAAAServerConfigAuthPort will be used instead.
Status: current Access: read-create
OBJECT-TYPE    
  INTEGER 0..65535  

myAAAServerConfigKeyStr 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.7
The server key to be used with this server. Retrieving the value of this object via SNMP will return an empty string for security reasons.
Status: current Access: read-create
OBJECT-TYPE    
  DisplayString Size(0..255)  

myAAAServerConfigRowStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.2.9.1.8
The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified except destroyed by setting this object to destroy(6).
Status: current Access: read-create
OBJECT-TYPE    
  RowStatus  

myAuthAddrTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.1
The table of MAC address which can be authenticated.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyAuthAddrEntry

myAuthAddrEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.1.1
The entry of MAC address which can be authenticated.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyAuthAddrEntry  

myAuthPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.1.1.1
The port number of the port/trunk to which frames received from a specific port/trunk and destined for a specific MAC address.
Status: current Access: read-only
OBJECT-TYPE    
  IfIndex  

myAuthMacAddress 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.1.1.2
The MAC address which can be authenticated.
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

myAuthAddrStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.1.1.3
valid(1) - this entry is currently in use . invalid(2) - writing this value to the object removes the corresponding entry.
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER valid(1), invalid(2)  

myAuthUserTable 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2
The table of authentication User Info.
Status: current Access: not-accessible
OBJECT-TYPE    
  SEQUENCE OF  
    MyAuthUserEntry

myAuthUserEntry 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1
The entry of authentication User Info table.
Status: current Access: not-accessible
OBJECT-TYPE    
  MyAuthUserEntry  

myAuthUserFdbId 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.1
The VID of vlan which the address blongs to.
Status: current Access: read-only
OBJECT-TYPE    
  Unsigned32  

myAuthUserMacAddress 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.2
The MAC Address of authentication User .
Status: current Access: read-only
OBJECT-TYPE    
  MacAddress  

myAuthUserName 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.3
The Name of authentication User.
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

myAuthUserSessionId 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.4
The Session Id of authentication User .
Status: current Access: read-only
OBJECT-TYPE    
  DisplayString  

myAuthUserIpAddr 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.5
The IP Address of authentication User .
Status: current Access: read-only
OBJECT-TYPE    
  IpAddress  

myAuthUserPort 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.6
The interface of authentication User .
Status: current Access: read-only
OBJECT-TYPE    
  INTEGER  

myAuthUserStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.2.1.7
Setting this object to 'invalid' will close a authenticated user, set its value to valid will cause no action of agent, when query always return value valid.
Status: current Access: read-write
OBJECT-TYPE    
  ConfigStatus  

myAuthUserForVPNDel 1.3.6.1.4.1.4881.1.1.10.2.19.1.3.3
VPN user's name. Setting this object will delete a authenticated user and this user is unauthenticated. The set string is the username. Reading this object always return null string.
Status: current Access: read-write
OBJECT-TYPE    
  DisplayString Size(1..255)  

myIpAuthorizationMode 1.3.6.1.4.1.4881.1.1.10.2.19.1.4.1
disable(1) - don't limit ip address of user dhcpServer(2) - limit ip address of user, only ip address assigned by the dhcp server is legit. radiusServer(3) - limit ip address of user, only ip address assigned by the radius server is legit. supplicant(4) - mac+ip+port indicates different users (get the IP adress through supplicant)
Status: current Access: read-write
OBJECT-TYPE    
  INTEGER disable(1), dhcpServer(2), radiusServer(3), supplicant(4)  

myClientProbeEnabledStatus 1.3.6.1.4.1.4881.1.1.10.2.19.1.5.1
The status of client probe function.
Status: current Access: read-write
OBJECT-TYPE    
  EnabledStatus  

myClientProbeHelloInterval 1.3.6.1.4.1.4881.1.1.10.2.19.1.5.2
The interval that client send hello packets.
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myClientProbeAliveInteval 1.3.6.1.4.1.4881.1.1.10.2.19.1.5.3
When switch does not receive any legal hello packets from client in this interval,it will send RADIUS-Account-Stop to RADIUS server to stop this connection.The value of the objects must be more than myClientProbeHelloInterval
Status: current Access: read-write
OBJECT-TYPE    
  Unsigned32  

myAAAMIBConformance 1.3.6.1.4.1.4881.1.1.10.2.19.2
OBJECT IDENTIFIER    

myAAAMIBCompliances 1.3.6.1.4.1.4881.1.1.10.2.19.2.1
OBJECT IDENTIFIER    

myAAAMIBGroups 1.3.6.1.4.1.4881.1.1.10.2.19.2.2
OBJECT IDENTIFIER    

myAAAMIBCompliance 1.3.6.1.4.1.4881.1.1.10.2.19.2.1.1
The compliance statement for entities which implement the My AAA MIB
Status: current Access: read-write
MODULE-COMPLIANCE    

myDot1xAuthMIBGroup 1.3.6.1.4.1.4881.1.1.10.2.19.2.2.1
A collection of objects providing dot1x authentication managment.
Status: current Access: read-write
OBJECT-GROUP    

myAAAServerMIBGroup 1.3.6.1.4.1.4881.1.1.10.2.19.2.2.2
A collection of objects providing AAA server managment.
Status: current Access: read-write
OBJECT-GROUP    

myAuthAddrMIBGroup 1.3.6.1.4.1.4881.1.1.10.2.19.2.2.3
A collection of objects providing address permitted authentication managment.
Status: current Access: read-write
OBJECT-GROUP    

myAuthModeMIBGroup 1.3.6.1.4.1.4881.1.1.10.2.19.2.2.4
A collection of objects providing authentication mode managment.
Status: current Access: read-write
OBJECT-GROUP    

myClientProbeGroup 1.3.6.1.4.1.4881.1.1.10.2.19.2.2.5
A collection of objects providing client probe management.
Status: current Access: read-write
OBJECT-GROUP    

Generation date: July 28, 2023, 16:18:13, Copyright © 2007 - 2022 - Circitor