MX25-OPT-MIB

File: MX25-OPT-MIB.mib (53475 bytes)

Imported modules

RFC1155-SMI

RFC-1212

Imported symbols

Counter

enterprises

OBJECT-TYPE

Defined Types

DisplayString
OCTET STRING

Cdx6500PPCTMX25PortEntry
SEQUENCE
	cdx6500mx25pCfgPortNum	INTEGER
	cdx6500mx25pSubType	INTEGER

Cdx6500PPCTMX25MPortEntry
SEQUENCE
	cdx6500mx25mpCfgPortNum	INTEGER
	cdx6500mx25mpSubType	INTEGER
	cdx6500mx25mpClockSource	INTEGER
	cdx6500mx25mpClockSpeed	INTEGER
	cdx6500mx25mpStationCnt	INTEGER
	cdx6500mx25mpPollTimer	INTEGER
	cdx6500mx25mpPollPeriod	INTEGER
	cdx6500mx25mpTries	INTEGER
	cdx6500mx25mpRestartTimer	INTEGER
	cdx6500mx25mpResetTimer	INTEGER
	cdx6500mx25mpCallTimer	INTEGER
	cdx6500mx25mpClearTimer	INTEGER
	cdx6500mx25mpPortControl	DisplayString
	cdx6500mx25mpTXEncoding	INTEGER
	cdx6500mx25mpElectricalInterfaceType	INTEGER
	cdx6500mx25mpV24ElectricalInterfaceOption	INTEGER
	cdx6500mx25mpHighSpeedElectricalInterfaceOption	INTEGER

Cdx6500PPCTMX25SPortEntry
SEQUENCE
	cdx6500mx25spCfgPortNum	INTEGER
	cdx6500mx25spSubType	INTEGER
	cdx6500mx25spClockSource	INTEGER
	cdx6500mx25spClockSpeed	INTEGER
	cdx6500mx25spStationAddress	DisplayString
	cdx6500mx25spPVCChannels	INTEGER
	cdx6500mx25spStartingPVC	INTEGER
	cdx6500mx25spSVCChannels	INTEGER
	cdx6500mx25spStartingSVC	INTEGER
	cdx6500mx25spPollTimer	INTEGER
	cdx6500mx25spTries	INTEGER
	cdx6500mx25spFrameWinSize	INTEGER
	cdx6500mx25spPacketWinSize	INTEGER
	cdx6500mx25spRestartTimer	INTEGER
	cdx6500mx25spResetTimer	INTEGER
	cdx6500mx25spCallTimer	INTEGER
	cdx6500mx25spClearTimer	INTEGER
	cdx6500mx25spMX25Options	DisplayString
	cdx6500mx25spRCDestination	DisplayString
	cdx6500mx25spCUG	DisplayString
	cdx6500mx25spBillingRecords	INTEGER
	cdx6500mx25spPortControl	DisplayString
	cdx6500mx25spTXEncoding	INTEGER
	cdx6500mx25spUpperQueue	INTEGER
	cdx6500mx25spLowerQueue	INTEGER
	cdx6500mx25spElectricalInterfaceType	INTEGER
	cdx6500mx25spV24ElectricalInterfaceOption	INTEGER
	cdx6500mx25spHighSpeedElectricalInterfaceOption	INTEGER

Cdx6500PPSTMX25PortEntry
SEQUENCE
	cdx6500mx25pStatsPortNum	INTEGER
	cdx6500mx25pPortStatus	DisplayString
	cdx6500mx25pPortSpeed	INTEGER
	cdx6500mx25pCharInTotal	Counter
	cdx6500mx25pCharOutTotal	Counter
	cdx6500mx25pCharsInPerSec	INTEGER
	cdx6500mx25pCharsOutPerSec	INTEGER
	cdx6500mx25pFrameInTotal	Counter
	cdx6500mx25pFrameOutTotal	Counter
	cdx6500mx25pFramesInPerSec	INTEGER
	cdx6500mx25pFramesOutPerSec	INTEGER

Cdx6500SPCTMX25StationEntry
SEQUENCE
	cdx6500mx25sCfgPortNum	INTEGER
	cdx6500mx25sCfgStationNum	INTEGER
	cdx6500mx25sStationAddress	DisplayString
	cdx6500mx25sPVCChannels	INTEGER
	cdx6500mx25sStartingPVC	INTEGER
	cdx6500mx25sSVCChannels	INTEGER
	cdx6500mx25sStartingSVC	INTEGER
	cdx6500mx25sFrameWinSize	INTEGER
	cdx6500mx25sPacketWinSize	INTEGER
	cdx6500mx25sMX25Options	DisplayString
	cdx6500mx25sRCDestination	DisplayString
	cdx6500mx25sCUG	DisplayString
	cdx6500mx25sBillingRecords	INTEGER
	cdx6500mx25sUpperQueue	INTEGER
	cdx6500mx25sLowerQueue	INTEGER

Cdx6500SPSTMX25StationEntry
SEQUENCE
	cdx6500mx25sStatsPortNum	INTEGER
	cdx6500mx25sStatsStationNum	INTEGER
	cdx6500mx25sStatsStnAddr	DisplayString
	cdx6500mx25sCharInTotal	Counter
	cdx6500mx25sCharOutTotal	Counter
	cdx6500mx25sCharsInPerSec	INTEGER
	cdx6500mx25sCharsOutPerSec	INTEGER
	cdx6500mx25sFrameInTotal	Counter
	cdx6500mx25sFrameOutTotal	Counter
	cdx6500mx25sFramesInPerSec	INTEGER
	cdx6500mx25sFramesOutPerSec	INTEGER
	cdx6500mx25sCallCount	INTEGER

Cdx6500ContMX25StationEntry
SEQUENCE
	cdx6500mx25sContPortNum	INTEGER
	cdx6500mx25sContStationNum	INTEGER
	cdx6500mx25sContBootStation	INTEGER
	cdx6500mx25sContDisableStation	INTEGER
	cdx6500mx25sContEnableStation	INTEGER
	cdx6500mx25sContBusyOutStation	INTEGER
	cdx6500mx25sContResetStnStats	INTEGER

Defined Values

codex		1.3.6.1.4.1.449
OBJECT IDENTIFIER

cdxProductSpecific		1.3.6.1.4.1.449.2
OBJECT IDENTIFIER

cdx6500		1.3.6.1.4.1.449.2.1
OBJECT IDENTIFIER

cdx6500Configuration		1.3.6.1.4.1.449.2.1.2
OBJECT IDENTIFIER

cdx6500CfgProtocolGroup		1.3.6.1.4.1.449.2.1.2.1
OBJECT IDENTIFIER

cdx6500PCTPortProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.1
OBJECT IDENTIFIER

cdx6500PCTStationProtocolGroup		1.3.6.1.4.1.449.2.1.2.1.3
OBJECT IDENTIFIER

cdx6500Statistics		1.3.6.1.4.1.449.2.1.3
OBJECT IDENTIFIER

cdx6500StatProtocolGroup		1.3.6.1.4.1.449.2.1.3.1
OBJECT IDENTIFIER

cdx6500PSTPortProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.1
OBJECT IDENTIFIER

cdx6500PSTStationProtocolGroup		1.3.6.1.4.1.449.2.1.3.1.3
OBJECT IDENTIFIER

cdx6500Controls		1.3.6.1.4.1.449.2.1.4
OBJECT IDENTIFIER

cdx6500ContMX25		1.3.6.1.4.1.449.2.1.4.6
OBJECT IDENTIFIER

cdx6500PPCTMX25PortTables		1.3.6.1.4.1.449.2.1.2.1.1.4
OBJECT IDENTIFIER

cdx6500PPCTMX25PortTable		1.3.6.1.4.1.449.2.1.2.1.1.4.1
All of the common configuration parameters relevant to the MX.25 port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPCTMX25PortEntry

cdx6500PPCTMX25PortEntry		1.3.6.1.4.1.449.2.1.2.1.1.4.1.1
A row of MX.25 Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPCTMX25PortEntry

cdx6500mx25pCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.1
MX25 Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25pSubType		1.3.6.1.4.1.449.2.1.2.1.1.4.1.1.2
This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	master(0), slave(1), newvalMaster(50)

cdx6500PPCTMX25MPortTable		1.3.6.1.4.1.449.2.1.2.1.1.4.2
All of the configuration parameters relevant to the MX.25 Master port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPCTMX25MPortEntry

cdx6500PPCTMX25MPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1
A row of MX.25 Master Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPCTMX25MPortEntry

cdx6500mx25mpCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.1
MX25 Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25mpSubType		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.2
This is the mode in which this MX25 port will run. newvalMaster : same functionality as 'master', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	master(0), newvalMaster(50)

cdx6500mx25mpClockSource		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.3
int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFc1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	int(0), ext(1), newvalInt(50)

cdx6500mx25mpClockSpeed		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.4
This is the speed of the port in bits per second, when using internal clocking.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1200..80000

cdx6500mx25mpStationCnt		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.5
The number of slave stations on the MX25 line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..32

cdx6500mx25mpPollTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.6
Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

cdx6500mx25mpPollPeriod		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.7
Time in milliseconds between polls when no data is exchanged.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	50..250

cdx6500mx25mpTries		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.8
Maximum number of attempts to complete a transmission.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

cdx6500mx25mpRestartTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.9
Restart-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25mpResetTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.10
Reset-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25mpCallTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.11
Call-Request timeout timer in seconds. If timer expires, call is cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..200

cdx6500mx25mpClearTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.12
Clear-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25mpPortControl		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.13
Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..8)

cdx6500mx25mpTXEncoding		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.14
This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz : same functionality as 'nrz', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nrz(0), nrzi(1), newvalNrz(50)

cdx6500mx25mpElectricalInterfaceType		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.15
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v24(1), v35(2), v36(3), x21(4), none(5)

cdx6500mx25mpV24ElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.16
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ri(1), tm(2)

cdx6500mx25mpHighSpeedElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.4.2.1.17
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), xover(2)

cdx6500PPCTMX25SPortTable		1.3.6.1.4.1.449.2.1.2.1.1.4.3
All of the configuration parameters relevant to the MX.25 Slave port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPCTMX25SPortEntry

cdx6500PPCTMX25SPortEntry		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1
A row of MX.25 Slave Port configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPCTMX25SPortEntry

cdx6500mx25spCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.1
MX25 Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25spSubType		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.2
This is the mode in which this MX25 port will run.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	slave(1)

cdx6500mx25spClockSource		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.3
int - internal clock source. ext - external clock source. newvalInt - same functionality as 'int', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	int(0), ext(1), newvalInt(50)

cdx6500mx25spClockSpeed		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.4
This is the speed of the port in bits per second, when using internal clocking.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1200..80000

cdx6500mx25spStationAddress		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.5
The station address on the multidrop line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..2)

cdx6500mx25spPVCChannels		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.6
Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..128

cdx6500mx25spStartingPVC		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.7
This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

cdx6500mx25spSVCChannels		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.8
Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500mx25spStartingSVC		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.9
This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500mx25spPollTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.10
Worst case delay for a slave to respond to a poll frame sent by the master, including modem turn around time, etc. Value in 10ths of second ( 30 = 3.0 seconds ).
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

cdx6500mx25spTries		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.11
Maximum number of attempts to complete a transmission.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..16

cdx6500mx25spFrameWinSize		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.12
Frame level window size must be set to the same value in devices at each end of the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

cdx6500mx25spPacketWinSize		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.13
Packet level window size must be set to the same value in devices at each end of the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

cdx6500mx25spRestartTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.14
Restart-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25spResetTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.15
Reset-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25spCallTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.16
Call-Request timeout timer in seconds. If timer expires, call is cleared.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..200

cdx6500mx25spClearTimer		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.17
Clear-Request timeout timer in seconds. If timer expires, request is sent again.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..255

cdx6500mx25spMX25Options		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.18
Select options on this MX.25 port as follows: NONE - no option specified. HOLD - hold calls over link restart. CUG - check closed user group; otherwise, CUG passes transparently. INL - inter-node link. Link goes to another 6500 device. INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier. DELAY - enable Delay and Path trace on this link (link must connected to Rel. 4.xx node) Any combination of the above specified by summing (e.g. HOLD+CUG+. . .).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..22)

cdx6500mx25spRCDestination		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.19
All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

cdx6500mx25spCUG		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.20
The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --) and separated by a comma. (e.g. 12,34,56,09,02,03 ). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..23)

cdx6500mx25spBillingRecords		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.21
This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1), newvalOff(50)

cdx6500mx25spPortControl		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.22
Specify any of the following port control options: NONE - no option specified. MB - raise Pin 22 when the port becomes disabled.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..8)

cdx6500mx25spTXEncoding		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.23
This is the data encoding used on the MX25 link. nrz - Non Return to Zero. nrzi - Non Return to Zero Inverted. newvalNrz - same functionality as 'nrz', new enumeration added for RFC1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	nrz(0), nrzi(1), newvalNrz(50)

cdx6500mx25spUpperQueue		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.24
This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..15

cdx6500mx25spLowerQueue		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.25
This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4

cdx6500mx25spElectricalInterfaceType		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.26
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	v24(1), v35(2), v36(3), x21(4), none(5)

cdx6500mx25spV24ElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.27
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	ri(1), tm(2)

cdx6500mx25spHighSpeedElectricalInterfaceOption		1.3.6.1.4.1.449.2.1.2.1.1.4.3.1.28
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	none(1), xover(2)

cdx6500PPSTMX25PortTable		1.3.6.1.4.1.449.2.1.3.1.1.4
All of the statistics parameters relevant to the MX25 Port table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500PPSTMX25PortEntry

cdx6500PPSTMX25PortEntry		1.3.6.1.4.1.449.2.1.3.1.1.4.1
A row of MX25 Port statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500PPSTMX25PortEntry

cdx6500mx25pStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.1.4.1.1
Number of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25pPortStatus		1.3.6.1.4.1.449.2.1.3.1.1.4.1.2
Status of this port : Up - Port is active. Down - Port Is inactive. Disabled - An operator has disabled the port. Busy Out - an operator has busied out the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(2..8)

cdx6500mx25pPortSpeed		1.3.6.1.4.1.449.2.1.3.1.1.4.1.3
This is the speed of the port when Clock=Int; this is the detected clock speed if Clock=Ext. If Port Speed is 0, Clock=Ext but clocking is not being received from attached device.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25pCharInTotal		1.3.6.1.4.1.449.2.1.3.1.1.4.1.4
Number of characters received by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25pCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.4.1.5
Number of characters sent by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25pCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.4.1.6
Summary of the characters being received over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25pCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.4.1.7
Summary of the characters being sent over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25pFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.1.4.1.8
Number of frames received by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25pFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.1.4.1.9
Number of frames sent by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25pFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.1.4.1.10
Summary of the frames being received over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25pFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.1.4.1.11
Summary of the frames being sent over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500SPCTMX25StationTable		1.3.6.1.4.1.449.2.1.2.1.3.1
All of the configuration parameters relevant to the MX.25 station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPCTMX25StationEntry

cdx6500SPCTMX25StationEntry		1.3.6.1.4.1.449.2.1.2.1.3.1.1
A row of MX.25 station configuration parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPCTMX25StationEntry

cdx6500mx25sCfgPortNum		1.3.6.1.4.1.449.2.1.2.1.3.1.1.1
MX25 Port Number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25sCfgStationNum		1.3.6.1.4.1.449.2.1.2.1.3.1.1.2
The number of the controller on the multidrop line. Also used for routing purposes.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

cdx6500mx25sStationAddress		1.3.6.1.4.1.449.2.1.2.1.3.1.1.3
The station address on the multidrop line.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..2)

cdx6500mx25sPVCChannels		1.3.6.1.4.1.449.2.1.2.1.3.1.1.4
Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs. PVC connections must be configured in the PVC Table.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..128

cdx6500mx25sStartingPVC		1.3.6.1.4.1.449.2.1.2.1.3.1.1.5
This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..255

cdx6500mx25sSVCChannels		1.3.6.1.4.1.449.2.1.2.1.3.1.1.6
Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consistent with needs.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500mx25sStartingSVC		1.3.6.1.4.1.449.2.1.2.1.3.1.1.7
This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..255

cdx6500mx25sFrameWinSize		1.3.6.1.4.1.449.2.1.2.1.3.1.1.8
Frame level window size must be set to the same value in devices at each end of the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

cdx6500mx25sPacketWinSize		1.3.6.1.4.1.449.2.1.2.1.3.1.1.9
Packet level window size must be set to the same value in devices at each end of the link.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..7

cdx6500mx25sMX25Options		1.3.6.1.4.1.449.2.1.2.1.3.1.1.10
Select options on this MX.25 port as follows: NONE - no option specified HOLD - hold calls over link restart CUG - check closed user group; otherwise, CUG passes transparently INL - inter-node link. Link goes to another 6500 device INLA - set with INL option when an MX.25 link connection is to a 6500 node using 2.12.04 or earlier Any combination of the above specified by summing (e.g. HOLD+CUG+. . .).
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(3..22)

cdx6500mx25sRCDestination		1.3.6.1.4.1.449.2.1.2.1.3.1.1.11
All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to port 1, use P1. To route calls to port 2, station 4, use P2S4. Blank this field to disable this function.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..32)

cdx6500mx25sCUG		1.3.6.1.4.1.449.2.1.2.1.3.1.1.12
The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except --) and separated by a comma. (e.g. 12,34,56,09,02,03). -- - No CUG Membership 00-99 - CUG Membership
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..23)

cdx6500mx25sBillingRecords		1.3.6.1.4.1.449.2.1.2.1.3.1.1.13
This controls whether billing (accounting) records will be created for calls on this port. newvalOff - same functionality as 'off', new enumeration added for RFc1155 compatibility.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	off(0), on(1), newvalOff(50)

cdx6500mx25sUpperQueue		1.3.6.1.4.1.449.2.1.2.1.3.1.1.14
This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	5..15

cdx6500mx25sLowerQueue		1.3.6.1.4.1.449.2.1.2.1.3.1.1.15
This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	0..4

cdx6500SPSTMX25StationTable		1.3.6.1.4.1.449.2.1.3.1.3.1
All of the statistics parameters relevant to the MX25 Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500SPSTMX25StationEntry

cdx6500SPSTMX25StationEntry		1.3.6.1.4.1.449.2.1.3.1.3.1.1
A row of MX25 Station statistics parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500SPSTMX25StationEntry

cdx6500mx25sStatsPortNum		1.3.6.1.4.1.449.2.1.3.1.3.1.1.1
Number of the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25sStatsStationNum		1.3.6.1.4.1.449.2.1.3.1.3.1.1.2
Station reference number.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER	1..4

cdx6500mx25sStatsStnAddr		1.3.6.1.4.1.449.2.1.3.1.3.1.1.3
Configured station address.
Status: mandatory	Access: read-only
OBJECT-TYPE
	DisplayString	Size(0..2)

cdx6500mx25sCharInTotal		1.3.6.1.4.1.449.2.1.3.1.3.1.1.4
Number of characters received by the port since the last node, port, or statistics reset
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25sCharOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.1.1.5
Number of characters sent by the port since the last node, port, or statistics reset
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25sCharsInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.1.1.6
Summary of the characters being received over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25sCharsOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.1.1.7
Summary of the characters being sent over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25sFrameInTotal		1.3.6.1.4.1.449.2.1.3.1.3.1.1.8
Number of frames received by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25sFrameOutTotal		1.3.6.1.4.1.449.2.1.3.1.3.1.1.9
Number of frames sent by the port since the last node, port, or statistics reset.
Status: mandatory	Access: read-only
OBJECT-TYPE
	Counter

cdx6500mx25sFramesInPerSec		1.3.6.1.4.1.449.2.1.3.1.3.1.1.10
Summary of the frames being received over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25sFramesOutPerSec		1.3.6.1.4.1.449.2.1.3.1.3.1.1.11
Summary of the frames being sent over the port.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500mx25sCallCount		1.3.6.1.4.1.449.2.1.3.1.3.1.1.12
Current number of calls.
Status: mandatory	Access: read-only
OBJECT-TYPE
	INTEGER

cdx6500ContMX25StationTable		1.3.6.1.4.1.449.2.1.4.6.1
All of the control parameters relevant to the MX25 Station table.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	SEQUENCE OF
		Cdx6500ContMX25StationEntry

cdx6500ContMX25StationEntry		1.3.6.1.4.1.449.2.1.4.6.1.1
A row of MX25 Station Control parameters.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	Cdx6500ContMX25StationEntry

cdx6500mx25sContPortNum		1.3.6.1.4.1.449.2.1.4.6.1.1.1
MX25 Port Number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..54

cdx6500mx25sContStationNum		1.3.6.1.4.1.449.2.1.4.6.1.1.2
MX25 Station Number.
Status: mandatory	Access: not-accessible
OBJECT-TYPE
	INTEGER	1..4

cdx6500mx25sContBootStation		1.3.6.1.4.1.449.2.1.4.6.1.1.3
Boots the specified MX25 station. boot - Boot Station. noBoot - Do not boot Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	boot(1), noBoot(2)

cdx6500mx25sContDisableStation		1.3.6.1.4.1.449.2.1.4.6.1.1.4
Disables the specified MX25 station. disable - Disable Station. noDisable - Do not disable Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	disable(1), noDisable(2)

cdx6500mx25sContEnableStation		1.3.6.1.4.1.449.2.1.4.6.1.1.5
Enables the specified MX25 station. enable - Enable Station. noEnable - Do not enable Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	enable(1), noEnable(2)

cdx6500mx25sContBusyOutStation		1.3.6.1.4.1.449.2.1.4.6.1.1.6
Busy outs the specified MX25 station. busyOut - Busyout Station. noBusyOut - Do not busyout Station.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	busyOut(1), noBusyOut(2)

cdx6500mx25sContResetStnStats		1.3.6.1.4.1.449.2.1.4.6.1.1.7
Busy outs the specified MX25 station. reset - Reset Station Statistics. noReset - Do not reset Station Statistics.
Status: mandatory	Access: write-only
OBJECT-TYPE
	INTEGER	reset(1), noReset(2)