MRV-IN-REACH-CHASSIS-MIB

File: MRV-IN-REACH-CHASSIS-MIB.mib (67311 bytes)

Imported modules

RFC1155-SMI RFC1213-MIB BRIDGE-MIB
RFC-1212 MRV-IN-REACH-PRODUCT-DIVISION-MIB

Imported symbols

Counter Gauge IpAddress
DisplayString MacAddress OBJECT-TYPE
mrvInReachProductDivision AddressType HardwareType
IOType

Defined Types

NetworkType  
INTEGER unknown(1), other(2), ethernet(3), tokenRing(4), fddi(5), wan(6), ethernetRepeater(7), tokenRingConcentrator(8), fddiConcentrator(9), atm(10), isdn(11), switchplane(12), switchedEthernet(13)    

SerialNumber  
STRING Size(0..6)    

Letter  
INTEGER a(1), b(2), c(3), d(4), e(5), f(6), g(7), h(8), i(9), j(10), k(11), l(12), m(13), n(14), o(15), p(16), q(17), r(18), s(19), t(20), u(21), v(22), w(23), x(24), y(25), z(26)    

SegmentEntry  
SEQUENCE    
  segmentType NetworkType
  segmentIndex Letter

PortEntry  
SEQUENCE    
  portType NetworkType
  portIndex INTEGER

ControllerEntry  
SEQUENCE    
  controllerType NetworkType
  controllerIndex INTEGER
  controllerNetwork OBJECT IDENTIFIER

InterfaceEntry  
SEQUENCE    
  interfaceIndex INTEGER
  interfaceNetwork OBJECT IDENTIFIER

SlotBootControlEntry  
SEQUENCE    
  slotBootControlSlot INTEGER
  slotBootControlIndex INTEGER
  slotBootControlStatus INTEGER
  slotBootControlController OBJECT IDENTIFIER
  slotBootControlNetwork OBJECT IDENTIFIER
  slotBootControlMopFile DisplayString
  slotBootControlInternetFile DisplayString
  slotBootControlInternetAddress IpAddress
  slotBootControlInternetServer IpAddress
  slotBootControlInternetGateway IpAddress
  slotBootControlInternetDelimiter DisplayString

SlotBootControlFlagEntry  
SEQUENCE    
  slotBootControlFlagLoadBootpTftp INTEGER
  slotBootControlFlagParamBootpTftp INTEGER
  slotBootControlFlagDumpBootpTftp INTEGER
  slotBootControlFlagLoadTftpDirect INTEGER
  slotBootControlFlagParamTftpDirect INTEGER
  slotBootControlFlagDumpTftpDirect INTEGER
  slotBootControlFlagLoadLocal INTEGER
  slotBootControlFlagParamLocal INTEGER
  slotBootControlFlagDumpLocal INTEGER
  slotBootControlFlagLoadMop INTEGER
  slotBootControlFlagParamMop INTEGER
  slotBootControlFlagDumpMop INTEGER
  slotBootControlFlagLoadXmop INTEGER
  slotBootControlFlagParamXmop INTEGER
  slotBootControlFlagDumpXmop INTEGER
  slotBootControlFlagLoadRarpTftp INTEGER
  slotBootControlFlagParamRarpTftp INTEGER
  slotBootControlFlagDumpRarpTftp INTEGER

SlotBootControlStorageEntry  
SEQUENCE    
  slotBootControlStorageClientSlot INTEGER
  slotBootControlStorageServerSlot INTEGER
  slotBootControlStorageStatus INTEGER
  slotBootControlStorageFailures Counter

SlotEntry  
SEQUENCE    
  slotIndex INTEGER
  slotAdminAction INTEGER
  slotOperStatus INTEGER
  slotSecondsSinceReset Gauge
  slotHardwareType HardwareType
  slotHardwareSerialNumber SerialNumber
  slotHardwareRevision INTEGER
  slotIOCardType IOType
  slotIOCardSerialNumber SerialNumber
  slotIOCardOperStatus INTEGER
  slotBootstrapFirmwareRevision INTEGER
  slotElementalFirmwareRevision INTEGER
  slotMemorySize INTEGER
  slotLedNumber Gauge
  slotLedStatus STRING
  slotBase802Address MacAddress
  slotIpAddress IpAddress
  slotPlus5Status INTEGER
  slotPlus12Status INTEGER
  slotMinus12Status INTEGER
  slotPlus5Watts Gauge
  slotPlus12Watts Gauge
  slotMinus12Watts Gauge
  slotIOCardHardwareVersion INTEGER
  slotRestoreNVS INTEGER
  slotDefaultNVS INTEGER

SlotBootEntry  
SEQUENCE    
  slotBootIndex INTEGER
  slotBootIfIndex INTEGER
  slotBootNetwork OBJECT IDENTIFIER
  slotBootProtocol INTEGER
  slotBoot802Address MacAddress
  slotBootAddressType AddressType
  slotBootAddress STRING
  slotBootServerAddressType AddressType
  slotBootServerAddress STRING
  slotBootGatewayAddress IpAddress
  slotBootFileName DisplayString
  slotBootBlockNumber Gauge
  slotBootCrashCode STRING

SlotControllerEntry  
SEQUENCE    
  slotControllerType NetworkType
  slotControllerIndex INTEGER
  slotControllerNetwork OBJECT IDENTIFIER

PowerSupplyEntry  
SEQUENCE    
  powerSupplyIndex INTEGER
  powerSupplyAdminAction INTEGER
  powerSupplyFirmwareVersion INTEGER
  powerSupplyRedundancyStatus INTEGER
  powerSupplyPlus5Status INTEGER
  powerSupplyPlus12Status INTEGER
  powerSupplyMinus12Status INTEGER
  powerSupplyThermalWarningStatus INTEGER
  powerSupplyThermalShutdownStatus INTEGER
  powerSupplyFanStatus INTEGER
  powerSupplyHardwareInhibitStatus INTEGER
  powerSupplyPlus5History INTEGER
  powerSupplyPlus12History INTEGER
  powerSupplyMinus12History INTEGER
  powerSupplyThermalWarningHistory INTEGER
  powerSupplyThermalShutdownHistory INTEGER
  powerSupplyFanHistory INTEGER
  powerSupplyHardwareInhibitHistory INTEGER
  powerSupplyPlus5Volts Gauge
  powerSupplyPlus12Volts Gauge
  powerSupplyMinus12Volts Gauge
  powerSupplyWatts Gauge
  powerSupplyWattsMax Gauge
  powerSupplyChassisWatts Gauge
  powerSupplyChassisWattsMax Gauge
  powerSupplyHardwareType INTEGER

FirmwareUpdateEntry  
SEQUENCE    
  firmwareUpdateSlotIndex INTEGER
  firmwareUpdateDefaultFileName DisplayString
  firmwareUpdateFileName DisplayString
  firmwareUpdateStatus INTEGER
  firmwareUpdateState INTEGER
  firmwareUpdateCompletionStatus INTEGER
  firmwareUpdateMethod INTEGER

Defined Values

xChassis 1.3.6.1.4.1.33.16
OBJECT IDENTIFIER    

xChassisBasic 1.3.6.1.4.1.33.16.1
OBJECT IDENTIFIER    

xSegment 1.3.6.1.4.1.33.16.2
OBJECT IDENTIFIER    

xPort 1.3.6.1.4.1.33.16.3
OBJECT IDENTIFIER    

xController 1.3.6.1.4.1.33.16.4
OBJECT IDENTIFIER    

xInterface 1.3.6.1.4.1.33.16.5
OBJECT IDENTIFIER    

xSlotBootControl 1.3.6.1.4.1.33.16.6
OBJECT IDENTIFIER    

xSlot 1.3.6.1.4.1.33.16.7
OBJECT IDENTIFIER    

xPowerSupply 1.3.6.1.4.1.33.16.8
OBJECT IDENTIFIER    

xFirmwareUpdate 1.3.6.1.4.1.33.16.9
OBJECT IDENTIFIER    

basicBase802Address 1.3.6.1.4.1.33.16.1.1
Base IEEE 802 global address for the chassis.
OBJECT-TYPE    
  MacAddress  

basicSlot 1.3.6.1.4.1.33.16.1.2
Chassis slot number (slotIndex) of the system whose agent is supplying this MIB.
OBJECT-TYPE    
  INTEGER  

basicSlotNumber 1.3.6.1.4.1.33.16.1.3
Number of slots in the chassis.
OBJECT-TYPE    
  INTEGER  

basicNewBase802Address 1.3.6.1.4.1.33.16.1.4
New base IEEE 802 global address for the chassis. Must be set in conjunction with featType 'changeEthernetAddress' and featKey from the MRV In-Reach System MIB.
OBJECT-TYPE    
  MacAddress  

segmentTable 1.3.6.1.4.1.33.16.2.1
A list of segment entries, one for each segment of each type on the chassis.
OBJECT-TYPE    
  SEQUENCE OF  
    SegmentEntry

segmentEntry 1.3.6.1.4.1.33.16.2.1.1
Values for a chassis segment.
OBJECT-TYPE    
  SegmentEntry  

segmentType 1.3.6.1.4.1.33.16.2.1.1.1
The segment type.
OBJECT-TYPE    
  NetworkType  

segmentIndex 1.3.6.1.4.1.33.16.2.1.1.2
An index value that uniquely identifies a segment.
OBJECT-TYPE    
  Letter  

portIOCardType 1.3.6.1.4.1.33.16.3.1
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

portIOCardSerialNumber 1.3.6.1.4.1.33.16.3.2
The MRV In-Reach serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

portIOCardOperStatus 1.3.6.1.4.1.33.16.3.3
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3)  

portTable 1.3.6.1.4.1.33.16.3.4
A list of port entries, one for each port of each type on the slots I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    PortEntry

portEntry 1.3.6.1.4.1.33.16.3.4.1
Values for an I/O card port.
OBJECT-TYPE    
  PortEntry  

portType 1.3.6.1.4.1.33.16.3.4.1.1
The port type.
OBJECT-TYPE    
  NetworkType  

portIndex 1.3.6.1.4.1.33.16.3.4.1.2
An index value that uniquely identifies a port.
OBJECT-TYPE    
  INTEGER  

controllerTable 1.3.6.1.4.1.33.16.4.1
A list of controller entries, one for each controller of each type on the local system.
OBJECT-TYPE    
  SEQUENCE OF  
    ControllerEntry

controllerEntry 1.3.6.1.4.1.33.16.4.1.1
Values for a controller.
OBJECT-TYPE    
  ControllerEntry  

controllerType 1.3.6.1.4.1.33.16.4.1.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

controllerIndex 1.3.6.1.4.1.33.16.4.1.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

controllerNetwork 1.3.6.1.4.1.33.16.4.1.1.3
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this controller is to use, that is, segmentType, portType or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

interfaceTable 1.3.6.1.4.1.33.16.5.1
A list of interface entries, corresponding to the MIB II Interface group. These are directly equivalent to hardware network controllers, and must be the lowest numbered interfaces on the system.
OBJECT-TYPE    
  SEQUENCE OF  
    InterfaceEntry

interfaceEntry 1.3.6.1.4.1.33.16.5.1.1
Values for an interface.
OBJECT-TYPE    
  InterfaceEntry  

interfaceIndex 1.3.6.1.4.1.33.16.5.1.1.1
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

interfaceNetwork 1.3.6.1.4.1.33.16.5.1.1.2
The instance identifier of the first object in the conceptual row entry for the segment, port, or controller this interface is to use, that is, segmentType, portType, or controllerType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlTable 1.3.6.1.4.1.33.16.6.1
A list of slot boot control entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlEntry

slotBootControlEntry 1.3.6.1.4.1.33.16.6.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlEntry  

slotBootControlSlot 1.3.6.1.4.1.33.16.6.1.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlIndex 1.3.6.1.4.1.33.16.6.1.1.2
An index value that uniquely identifies a boot control entry, from 1 to the number of entries for the slot.
OBJECT-TYPE    
  INTEGER  

slotBootControlStatus 1.3.6.1.4.1.33.16.6.1.1.3
The status of the entry. Set to 'disabled' to disable the entry.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlController 0.0.1.3.6.1.4.1.33.16.6.1.1.4
The instance identifier of the first object in the conceptual row entry for the controller this entry selects for bootstrap operation, that is, controllerType. This entry must be compatible with slotBootControlNetwork, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlNetwork 0.0.1.3.6.1.4.1.33.16.6.1.1.5
The instance identifier of the first object in the conceptual row entry for the segment or port this entry selects for bootstrap operation, that is, segmentType or portType. This entry must be compatible with slotBootControlController, including being of the same network type. The value 0.0 indicates default action.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootControlMopFile 1.3.6.1.4.1.33.16.6.1.1.6
The software file name to request for down-line load of the server via MOP or XMOP.
OBJECT-TYPE    
  DisplayString Size(0..15)  

slotBootControlInternetFile 1.3.6.1.4.1.33.16.6.1.1.7
The filename to request when loading an image via TFTP.
OBJECT-TYPE    
  DisplayString Size(0..64)  

slotBootControlInternetAddress 1.3.6.1.4.1.33.16.6.1.1.8
The internet address of the system is to use for itself when loading via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetServer 1.3.6.1.4.1.33.16.6.1.1.9
The internet address of the server to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetGateway 1.3.6.1.4.1.33.16.6.1.1.10
The internet address of the gateway to use when loading an image via TFTP. The value 0.0.0.0 indicates default action.
OBJECT-TYPE    
  IpAddress  

slotBootControlInternetDelimiter 1.3.6.1.4.1.33.16.6.1.1.11
The character separating the load file directory name from the file name.
OBJECT-TYPE    
  DisplayString Size(0..1)  

slotBootControlFlagTable 1.3.6.1.4.1.33.16.6.2
A list of slot boot control source flag entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlFlagEntry

slotBootControlFlagEntry 1.3.6.1.4.1.33.16.6.2.1
Values for a boot control flag.
OBJECT-TYPE    
  SlotBootControlFlagEntry  

slotBootControlFlagLoadBootpTftp 1.3.6.1.4.1.33.16.6.2.1.1
Control for performing load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamBootpTftp 1.3.6.1.4.1.33.16.6.2.1.2
Control for performing parameter load over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpBootpTftp 1.3.6.1.4.1.33.16.6.2.1.3
Control for performing dump over BOOTP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadTftpDirect 1.3.6.1.4.1.33.16.6.2.1.4
Control for performing load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamTftpDirect 1.3.6.1.4.1.33.16.6.2.1.5
Control for performing parameter load over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpTftpDirect 1.3.6.1.4.1.33.16.6.2.1.6
Control for performing dump over direct TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadLocal 1.3.6.1.4.1.33.16.6.2.1.7
Control for performing load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamLocal 1.3.6.1.4.1.33.16.6.2.1.8
Control for performing parameter load from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpLocal 1.3.6.1.4.1.33.16.6.2.1.9
Control for performing dump from a local device.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadMop 1.3.6.1.4.1.33.16.6.2.1.10
Control for performing load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamMop 1.3.6.1.4.1.33.16.6.2.1.11
Control for performing parameter load over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpMop 1.3.6.1.4.1.33.16.6.2.1.12
Control for performing dump over Digital's MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadXmop 1.3.6.1.4.1.33.16.6.2.1.13
Control for performing load over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamXmop 1.3.6.1.4.1.33.16.6.2.1.14
Control for performing parameter load over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpXmop 1.3.6.1.4.1.33.16.6.2.1.15
Control for performing dump over MRV In-Reach extended MOP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagLoadRarpTftp 1.3.6.1.4.1.33.16.6.2.1.16
Control for performing load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagParamRarpTftp 1.3.6.1.4.1.33.16.6.2.1.17
Control for performing parameter load over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlFlagDumpRarpTftp 1.3.6.1.4.1.33.16.6.2.1.18
Control for performing dump over RARP/TFTP.
OBJECT-TYPE    
  INTEGER disabled(1), enabled(2)  

slotBootControlStorageTable 1.3.6.1.4.1.33.16.6.3
A list of slot boot control Storage entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootControlStorageEntry

slotBootControlStorageEntry 1.3.6.1.4.1.33.16.6.3.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotBootControlStorageEntry  

slotBootControlStorageClientSlot 1.3.6.1.4.1.33.16.6.3.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageServerSlot 1.3.6.1.4.1.33.16.6.3.1.2
An index value that uniquely identifies the slot in which the Storage record resides, with the same values as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootControlStorageStatus 1.3.6.1.4.1.33.16.6.3.1.3
The status of the entry.
OBJECT-TYPE    
  INTEGER present(1), failed(2), ok(3), notpresent(4)  

slotBootControlStorageFailures 1.3.6.1.4.1.33.16.6.3.1.4
The number of times a read from or write to a given Storage location failed
OBJECT-TYPE    
  Counter  

slotTable 1.3.6.1.4.1.33.16.7.1
A list of slot entries.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotEntry

slotEntry 1.3.6.1.4.1.33.16.7.1.1
Values for a chassis slot.
OBJECT-TYPE    
  SlotEntry  

slotIndex 1.3.6.1.4.1.33.16.7.1.1.1
An index value that uniquely identifies a slot, in the range 0 to basicSlotNumber, where the value 0 indicates the same slot as basicSlot. As the objects found at instance zero are duplicates, that instance does not appear in responses a get-next, that is, the lowest numbered slotIndex returned by get-next is 1.
OBJECT-TYPE    
  INTEGER  

slotAdminAction 1.3.6.1.4.1.33.16.7.1.1.2
Control to cause reset of the system in a slot. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of slotOperStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

slotOperStatus 1.3.6.1.4.1.33.16.7.1.1.3
Relative to the chassis, the current operating status of the system in the slot.
OBJECT-TYPE    
  INTEGER loadRequested(1), loading(2), dumpRequested(3), dumping(4), paramRequested(5), paramLoading(6), running(7), initializing(8), attended(9), internal10(10), internal11(11), inhibited(12), maxserverCard(13), invalidConfigStorage(14), securityLockdown(15), resetHold(64), selfTest(65), notResponding(66), broken(67), unknown(68), notApplicable(69)  

slotSecondsSinceReset 1.3.6.1.4.1.33.16.7.1.1.4
The number of seconds since the system in the slot was last reset by hardware or software.
OBJECT-TYPE    
  Gauge  

slotHardwareType 1.3.6.1.4.1.33.16.7.1.1.5
The type of hardware in the slot.
OBJECT-TYPE    
  HardwareType  

slotHardwareSerialNumber 1.3.6.1.4.1.33.16.7.1.1.6
The MRV In-Reach serial number of the function card hardware in this slot.
OBJECT-TYPE    
  SerialNumber  

slotHardwareRevision 1.3.6.1.4.1.33.16.7.1.1.7
This revision level of the function card hardware in the slot.
OBJECT-TYPE    
  INTEGER  

slotIOCardType 1.3.6.1.4.1.33.16.7.1.1.8
The hardware type of the I/O card in this slot.
OBJECT-TYPE    
  IOType  

slotIOCardSerialNumber 1.3.6.1.4.1.33.16.7.1.1.9
The MRV In-Reach serial number of the I/O card in this slot.
OBJECT-TYPE    
  SerialNumber  

slotIOCardOperStatus 1.3.6.1.4.1.33.16.7.1.1.10
Status of the I/O card relative to the function card in this slot.
OBJECT-TYPE    
  INTEGER unknown(1), mismatch(2), good(3), notApplicable(4)  

slotBootstrapFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.11
The firmware revision level of the bootstrap ROM installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotElementalFirmwareRevision 1.3.6.1.4.1.33.16.7.1.1.12
The firmware revision level of the minimal function ROM (management bus microprocessor) installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotMemorySize 1.3.6.1.4.1.33.16.7.1.1.13
The number of bytes of memory installed in the system in the slot.
OBJECT-TYPE    
  INTEGER  

slotLedNumber 1.3.6.1.4.1.33.16.7.1.1.14
The number of LEDs on the system in the slot. A value of 0 indicates none, unknown, or status not readable.
OBJECT-TYPE    
  Gauge  

slotLedStatus 1.3.6.1.4.1.33.16.7.1.1.15
The status of the LEDs displayed on the front and back of the system in the slot. The first bit is the high-order bit of the first byte of the value, proceeding to the low-order bit, then to then next byte. On the system hardware, the first LED is at the top, left, front, proceeding left to right, top to bottom, and front to back.
OBJECT-TYPE    
  STRING Size(0..9)  

slotBase802Address 1.3.6.1.4.1.33.16.7.1.1.16
Base IEEE 802 global address for the slot.
OBJECT-TYPE    
  MacAddress  

slotIpAddress 1.3.6.1.4.1.33.16.7.1.1.17
An internet address to which the system in this slot might respond. May be one of many.
OBJECT-TYPE    
  IpAddress  

slotPlus5Status 1.3.6.1.4.1.33.16.7.1.1.18
Status of the +5 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus12Status 1.3.6.1.4.1.33.16.7.1.1.19
Status of the +12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotMinus12Status 1.3.6.1.4.1.33.16.7.1.1.20
Status of the -12 volt power to the slot.
OBJECT-TYPE    
  INTEGER unknown(1), broken(2), good(3)  

slotPlus5Watts 1.3.6.1.4.1.33.16.7.1.1.21
Tenths of watts of +5 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotPlus12Watts 1.3.6.1.4.1.33.16.7.1.1.22
Tenths of watts of +12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotMinus12Watts 1.3.6.1.4.1.33.16.7.1.1.23
Tenths of watts of -12 volt power currently drawn by the slot.
OBJECT-TYPE    
  Gauge  

slotIOCardHardwareVersion 1.3.6.1.4.1.33.16.7.1.1.24
Version number of I/O card in the slot.
OBJECT-TYPE    
  INTEGER  

slotRestoreNVS 1.3.6.1.4.1.33.16.7.1.1.25
Setting to 'execute' causes the non-volatile parameter storage to be restored from an installed memory card. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotDefaultNVS 1.3.6.1.4.1.33.16.7.1.1.26
Setting to 'execute' causes non-volatile stored parameters to be reset to factory defaults. Setting to 'ready' has no effect.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

slotBootTable 1.3.6.1.4.1.33.16.7.2
A list of slot bootstrap status entries. A given slot has an entry in this table only when slotOperStatus is one of: loadRequested, loading, dumpRequested, dumping, paramRequested, paramLoading
OBJECT-TYPE    
  SEQUENCE OF  
    SlotBootEntry

slotBootEntry 1.3.6.1.4.1.33.16.7.2.1
Bootstrap status values for a chassis slot.
OBJECT-TYPE    
  SlotBootEntry  

slotBootIndex 1.3.6.1.4.1.33.16.7.2.1.1
An index value that uniquely identifies a slot, defined the same as slotIndex.
OBJECT-TYPE    
  INTEGER  

slotBootIfIndex 1.3.6.1.4.1.33.16.7.2.1.2
An index value that uniquely identifies the interface in use for bootstrap functions. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
OBJECT-TYPE    
  INTEGER  

slotBootNetwork 1.3.6.1.4.1.33.16.7.2.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this interface is using, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

slotBootProtocol 1.3.6.1.4.1.33.16.7.2.1.4
The protocol in use for bootstrap operation.
OBJECT-TYPE    
  INTEGER other(1), unknown(2), mop(3), xmop(4), rarpTftp(5), bootpTftp(6), tftp(7), local(8), managementBus(9)  

slotBoot802Address 1.3.6.1.4.1.33.16.7.2.1.5
IEEE 802 global address in use for bootstrap operation.
OBJECT-TYPE    
  MacAddress  

slotBootAddressType 1.3.6.1.4.1.33.16.7.2.1.6
The type of network address contained in slotBootAddress.
OBJECT-TYPE    
  AddressType  

slotBootAddress 1.3.6.1.4.1.33.16.7.2.1.7
The network address the system in the slot is using to identify itself for bootstrap operation.
OBJECT-TYPE    
  STRING Size(0..6)  

slotBootServerAddressType 1.3.6.1.4.1.33.16.7.2.1.8
The type of network address contained in slotBootServerAddress.
OBJECT-TYPE    
  AddressType  

slotBootServerAddress 1.3.6.1.4.1.33.16.7.2.1.9
The network address of the system supplying bootstrap services to the system in the slot.
OBJECT-TYPE    
  STRING Size(0..6)  

slotBootGatewayAddress 1.3.6.1.4.1.33.16.7.2.1.10
The internet address of the router in use for bootstrap operation.
OBJECT-TYPE    
  IpAddress  

slotBootFileName 1.3.6.1.4.1.33.16.7.2.1.11
The full name of the file in use for bootstrap operation.
OBJECT-TYPE    
  DisplayString Size(0..64)  

slotBootBlockNumber 1.3.6.1.4.1.33.16.7.2.1.12
The current block number being transferred for bootstrap operation, zero if unknown or not applicable.
OBJECT-TYPE    
  Gauge  

slotBootCrashCode 1.3.6.1.4.1.33.16.7.2.1.13
If slotOperStatus is dumpRequested or dumping, a code number to identify the crash reason; otherwise zero length.
OBJECT-TYPE    
  STRING Size(0..4)  

slotControllerTable 1.3.6.1.4.1.33.16.7.3
A list of controller entries, one for each controller of each type in each slot.
OBJECT-TYPE    
  SEQUENCE OF  
    SlotControllerEntry

slotControllerEntry 1.3.6.1.4.1.33.16.7.3.1
Values for a controller.
OBJECT-TYPE    
  SlotControllerEntry  

slotControllerType 1.3.6.1.4.1.33.16.7.3.1.1
The controller type.
OBJECT-TYPE    
  NetworkType  

slotControllerIndex 1.3.6.1.4.1.33.16.7.3.1.2
An index value that uniquely identifies a controller.
OBJECT-TYPE    
  INTEGER  

slotControllerNetwork 1.3.6.1.4.1.33.16.7.3.1.3
The instance identifier of the first object in the conceptual row entry for the segment or port this controller is to use, that is, segmentType or portType.
OBJECT-TYPE    
  OBJECT IDENTIFIER  

powerSupplyTable 1.3.6.1.4.1.33.16.8.1
A list of power supply entries.
OBJECT-TYPE    
  SEQUENCE OF  
    PowerSupplyEntry

powerSupplyEntry 1.3.6.1.4.1.33.16.8.1.1
Values for a chassis power supply.
OBJECT-TYPE    
  PowerSupplyEntry  

powerSupplyIndex 1.3.6.1.4.1.33.16.8.1.1.1
An index value that uniquely identifies a power supply, in the range 1 to the number of power supply slots in the chassis.
OBJECT-TYPE    
  INTEGER  

powerSupplyAdminAction 1.3.6.1.4.1.33.16.8.1.1.2
Control to cause reset of the power supply. When read, the value is always 'ready'. Setting to 'reset' or 'resetHold' causes a single attempt to take that action, but does not ensure transition to any particular value of powerSupplyRedundancyStatus.
OBJECT-TYPE    
  INTEGER ready(1), reset(2), resetHold(3)  

powerSupplyFirmwareVersion 1.3.6.1.4.1.33.16.8.1.1.3
Version number of power supply firmware.
OBJECT-TYPE    
  INTEGER  

powerSupplyRedundancyStatus 1.3.6.1.4.1.33.16.8.1.1.4
The current redundancy status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), disabled(2), redundant(3), engaged(4)  

powerSupplyPlus5Status 1.3.6.1.4.1.33.16.8.1.1.5
Status of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12Status 1.3.6.1.4.1.33.16.8.1.1.6
Status of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12Status 1.3.6.1.4.1.33.16.8.1.1.7
Status of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningStatus 1.3.6.1.4.1.33.16.8.1.1.8
The current thermal warning status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownStatus 1.3.6.1.4.1.33.16.8.1.1.9
The current thermal shutdown status of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanStatus 1.3.6.1.4.1.33.16.8.1.1.10
The current status of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitStatus 1.3.6.1.4.1.33.16.8.1.1.11
The current status of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5History 1.3.6.1.4.1.33.16.8.1.1.12
History of the +5 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus12History 1.3.6.1.4.1.33.16.8.1.1.13
History of the +12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyMinus12History 1.3.6.1.4.1.33.16.8.1.1.14
History of the -12 volt power from the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalWarningHistory 1.3.6.1.4.1.33.16.8.1.1.15
The thermal warning history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyThermalShutdownHistory 1.3.6.1.4.1.33.16.8.1.1.16
The thermal shutdown history of the power supply.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyFanHistory 1.3.6.1.4.1.33.16.8.1.1.17
The status history of the power supply's fan.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyHardwareInhibitHistory 1.3.6.1.4.1.33.16.8.1.1.18
The status history of the power supply's hardware inhibit.
OBJECT-TYPE    
  INTEGER unknown(1), good(2), broken(3)  

powerSupplyPlus5Volts 1.3.6.1.4.1.33.16.8.1.1.19
In hundredths, volts of +5 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyPlus12Volts 1.3.6.1.4.1.33.16.8.1.1.20
In hundredths, volts of +12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyMinus12Volts 1.3.6.1.4.1.33.16.8.1.1.21
In hundredths, volts of -12 volt power currently provided by the power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWatts 1.3.6.1.4.1.33.16.8.1.1.22
Watts of power currently drawn from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyWattsMax 1.3.6.1.4.1.33.16.8.1.1.23
Maximum watts of power available from this power supply. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWatts 1.3.6.1.4.1.33.16.8.1.1.24
Total watts of power currently drawn by the entire chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyChassisWattsMax 1.3.6.1.4.1.33.16.8.1.1.25
Total maximum watts of power available from all the power supplies in the chassis. A value of 0 indicates unknown.
OBJECT-TYPE    
  Gauge  

powerSupplyHardwareType 1.3.6.1.4.1.33.16.8.1.1.26
The type of power supply.
OBJECT-TYPE    
  INTEGER other(1), ps130(2), bb190(3)  

firmwareUpdateTable 1.3.6.1.4.1.33.16.9.1
Table of descriptive and status information concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  SEQUENCE OF  
    FirmwareUpdateEntry

firmwareUpdateEntry 1.3.6.1.4.1.33.16.9.1.1
An entry in the table concerning the writing of firmware to a target I/O card.
OBJECT-TYPE    
  FirmwareUpdateEntry  

firmwareUpdateSlotIndex 1.3.6.1.4.1.33.16.9.1.1.1
This variable identifies the slot to which is to be the target of the firmware update.
OBJECT-TYPE    
  INTEGER  

firmwareUpdateDefaultFileName 1.3.6.1.4.1.33.16.9.1.1.2
This variable when read will obtain the default file name from the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateFileName 1.3.6.1.4.1.33.16.9.1.1.3
This variable contains the name of the file to be read from the flash memory card and written to the target.
OBJECT-TYPE    
  DisplayString  

firmwareUpdateStatus 1.3.6.1.4.1.33.16.9.1.1.4
This variable is used to start the update process. The agent always 'ready' for this value. Setting this value to 'execute' causes the agent to write the file specified by firmwareUpdateFileName to be written to the taget. Setting this value to 'execute' when firmwareUpdateFileName has not been written or when firmwareUpdateState is 'writing' causes bad value to be returned.
OBJECT-TYPE    
  INTEGER ready(1), execute(2)  

firmwareUpdateState 1.3.6.1.4.1.33.16.9.1.1.5
This variable indicates the current state of firmware update, 'idle' indicates that firmware update may be initiated, and 'writing' indicates that an update is in process.
OBJECT-TYPE    
  INTEGER idle(1), writing(2)  

firmwareUpdateCompletionStatus 1.3.6.1.4.1.33.16.9.1.1.6
This variable indicates the completion status of the the last firmware update attempt. 'none' indicates that no firmware update has yet been attempted.
OBJECT-TYPE    
  INTEGER none(1), success(2), noTarget(3), busError(4), badFileName(5), targetError(6), timeout(7)  

firmwareUpdateMethod 1.3.6.1.4.1.33.16.9.1.1.7
This variable indicates the method of update of the firmware update attempt.
OBJECT-TYPE    
  INTEGER card(1), local(2)