MPLS-LC-ATM-STD-MIB

File: MPLS-LC-ATM-STD-MIB.mib (11303 bytes)

Imported modules

SNMPv2-SMI SNMPv2-CONF SNMPv2-TC
ATM-TC-MIB MPLS-TC-STD-MIB MPLS-LSR-STD-MIB

Imported symbols

MODULE-IDENTITY OBJECT-TYPE MODULE-COMPLIANCE
OBJECT-GROUP RowStatus StorageType
TruthValue AtmVpIdentifier mplsStdMIB
MplsAtmVcIdentifier mplsInterfaceIndex

Defined Types

MplsLcAtmStdInterfaceConfEntry  
SEQUENCE    
  mplsLcAtmStdCtrlVpi AtmVpIdentifier
  mplsLcAtmStdCtrlVci MplsAtmVcIdentifier
  mplsLcAtmStdUnlabTrafVpi AtmVpIdentifier
  mplsLcAtmStdUnlabTrafVci MplsAtmVcIdentifier
  mplsLcAtmStdVcMerge TruthValue
  mplsLcAtmVcDirectlyConnected TruthValue
  mplsLcAtmLcAtmVPI AtmVpIdentifier
  mplsLcAtmStdIfConfRowStatus RowStatus
  mplsLcAtmStdIfConfStorageType StorageType

Defined Values

mplsLcAtmStdMIB 1.3.6.1.2.1.10.166.9
This MIB module contains managed object definitions for MPLS Label-Controlled ATM interfaces as defined in [RFC3035]. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC 4368; see the RFC itself for full legal notices.
MODULE-IDENTITY    

mplsLcAtmStdNotifications 1.3.6.1.2.1.10.166.9.0
OBJECT IDENTIFIER    

mplsLcAtmStdObjects 1.3.6.1.2.1.10.166.9.1
OBJECT IDENTIFIER    

mplsLcAtmStdConformance 1.3.6.1.2.1.10.166.9.2
OBJECT IDENTIFIER    

mplsLcAtmStdInterfaceConfTable 1.3.6.1.2.1.10.166.9.1.1
This table specifies per-interface MPLS LC-ATM capability and associated information. In particular, this table sparsely extends the MPLS-LSR-STD-MIB's mplsInterfaceConfTable.
OBJECT-TYPE    
  SEQUENCE OF  
    MplsLcAtmStdInterfaceConfEntry

mplsLcAtmStdInterfaceConfEntry 1.3.6.1.2.1.10.166.9.1.1.1
An entry in this table is created by an LSR for every interface capable of supporting MPLS LC-ATM. Each entry in this table will exist only if a corresponding entry in ifTable and mplsInterfaceConfTable exists. If the associated entries in ifTable and mplsInterfaceConfTable are deleted, the corresponding entry in this table must also be deleted shortly thereafter.
OBJECT-TYPE    
  MplsLcAtmStdInterfaceConfEntry  

mplsLcAtmStdCtrlVpi 1.3.6.1.2.1.10.166.9.1.1.1.1
This is the VPI value over which this LSR is willing to accept control traffic on this interface.
OBJECT-TYPE    
  AtmVpIdentifier  

mplsLcAtmStdCtrlVci 1.3.6.1.2.1.10.166.9.1.1.1.2
This is the VCI value over which this LSR is willing to accept control traffic on this interface.
OBJECT-TYPE    
  MplsAtmVcIdentifier  

mplsLcAtmStdUnlabTrafVpi 1.3.6.1.2.1.10.166.9.1.1.1.3
This is the VPI value over which this LSR is willing to accept unlabeled traffic on this interface.
OBJECT-TYPE    
  AtmVpIdentifier  

mplsLcAtmStdUnlabTrafVci 1.3.6.1.2.1.10.166.9.1.1.1.4
This is the VCI value over which this LSR is willing to accept unlabeled traffic on this interface.
OBJECT-TYPE    
  MplsAtmVcIdentifier  

mplsLcAtmStdVcMerge 1.3.6.1.2.1.10.166.9.1.1.1.5
If set to true(1), indicates that this interface is capable of ATM VC merge; otherwise, it MUST be set to false(2).
OBJECT-TYPE    
  TruthValue  

mplsLcAtmVcDirectlyConnected 1.3.6.1.2.1.10.166.9.1.1.1.6
This value indicates whether an LC-ATM is directly or indirectly (by means of a VP) connected. If set to true(1), indicates that this interface is directly connected LC-ATM; otherwise, it MUST be set to false(2). Note that although it can be intimated from RFC 3057 that multiple VPs may be used, in practice only a single one is used, and therefore the authors of this MIB module have chosen to model it as such.
OBJECT-TYPE    
  TruthValue  

mplsLcAtmLcAtmVPI 1.3.6.1.2.1.10.166.9.1.1.1.7
This is the VPI value used for indirectly connected LC-ATM interfaces. For these interfaces, the VPI field is not available to MPLS, and the label MUST be encoded entirely within the VCI field (see [RFC3035]). If the interface is directly connected, this value MUST be set to zero.
OBJECT-TYPE    
  AtmVpIdentifier  

mplsLcAtmStdIfConfRowStatus 1.3.6.1.2.1.10.166.9.1.1.1.8
This object is used to create and delete entries in this table. When configuring entries in this table, the corresponding ifEntry and mplsInterfaceConfEntry MUST exist beforehand. If a manager attempts to create an entry for a corresponding mplsInterfaceConfEntry that does not support LC-ATM, the agent MUST return an inconsistentValue error. If this table is implemented read-only, then the agent must set this object to active(1) when this row is made active. If this table is implemented writable, then an agent MUST not allow modification to its objects once this value is set to active(1), except to mplsLcAtmStdIfConfRowStatus and mplsLcAtmStdIfConfStorageType.
OBJECT-TYPE    
  RowStatus  

mplsLcAtmStdIfConfStorageType 1.3.6.1.2.1.10.166.9.1.1.1.9
The storage type for this conceptual row. Conceptual rows having the value 'permanent(4)' need not allow write-access to any columnar objects in the row.
OBJECT-TYPE    
  StorageType  

mplsLcAtmStdCompliances 1.3.6.1.2.1.10.166.9.2.1
OBJECT IDENTIFIER    

mplsLcAtmStdGroups 1.3.6.1.2.1.10.166.9.2.2
OBJECT IDENTIFIER    

mplsLcAtmStdModuleFullCompliance 1.3.6.1.2.1.10.166.9.2.1.1
Support for createAndWait and notReady is not required.
MODULE-COMPLIANCE    
  mplsLcAtmStdIfConfRowStatus RowStatus active(1), notInService(2)
  notInService RowStatus active(1), notInService(2), createAndGo(4), destroy(6)

mplsLcAtmStdModuleReadOnlyCompliance 1.3.6.1.2.1.10.166.9.2.1.2
Write access is not required.
MODULE-COMPLIANCE    
  mplsLcAtmStdIfConfRowStatus RowStatus active(1)

mplsLcAtmStdIfGroup 1.3.6.1.2.1.10.166.9.2.2.1
Collection of objects needed for MPLS LC-ATM interface configuration.
OBJECT-GROUP